ERROR_INSTALL_SOURCE_ABSENT - SMB Zugriffsproblem?

[yafnag]

Hallo

Ich habe per Setup Detector und Package Builder ein 7-Zip Paket gebaut.
Wenn ich dieses Paket auf einem Client installieren schlägt die Installation fehl mit "Error: ExitCode = 1612 ERROR_INSTALL_SOURCE_ABSENT The installation source for this product is not available. Verify that the source exists and that you can access it."

Davon ausgehend, dass das Quck-Install Script alle Rechte auf die SMB-Freigaben korrekt erstellt hat, bin ich mittlerweile etwas ratlos.

Code: Alles auswählen

(80)      [6] [2024-07-30 10:15:07.510] [aaa_7z2407-x64] Actionrequest for Product: aaa_7z2407-x64 is: setup
(81)      [6] [2024-07-30 10:15:07.526] [aaa_7z2407-x64] HTTPSender Post succeeded
(82)      [6] [2024-07-30 10:15:07.526] [aaa_7z2407-x64] Server-FQDN: srvvmopsi.srv.local Server-IP: 192.168.123.242
(83)      [6] [2024-07-30 10:15:07.527] [aaa_7z2407-x64] JSON Bench for backend_getInterface "params":[],"id":1} Start: 10:15:07:510 Time: 00:00:00:017
(84)      [6] [2024-07-30 10:15:07.634] [aaa_7z2407-x64] HTTPSender Post succeeded
(85)      [6] [2024-07-30 10:15:07.634] [aaa_7z2407-x64] Server-FQDN: srvvmopsi.srv.local Server-IP: 192.168.123.242
(86)      [6] [2024-07-30 10:15:07.635] [aaa_7z2407-x64] JSON Bench for productPropertyState_getValues "params":["aaa_7z2407-x64","","srvvmcl08.srv.local Start: 10:15:07:607 Time: 00:00:00:028
(87)      [7] [2024-07-30 10:15:07.635] [aaa_7z2407-x64] Mapped result of productPropertyState_getValues:
(88)      [6] [2024-07-30 10:15:07.644] [aaa_7z2407-x64] HTTPSender Post succeeded
(89)      [6] [2024-07-30 10:15:07.644] [aaa_7z2407-x64] Server-FQDN: srvvmopsi.srv.local Server-IP: 192.168.123.242
(90)      [6] [2024-07-30 10:15:07.644] [aaa_7z2407-x64] JSON Bench for getProduct_hash "params":["aaa_7z2407-x64","srvvmopsi.srv.local"], Start: 10:15:07:635 Time: 00:00:00:009
(91)      [7] [2024-07-30 10:15:07.644] [aaa_7z2407-x64] in TOpsi4Data.initProduct : aaa_7z2407-x64
(92)      [6] [2024-07-30 10:15:07.653] [aaa_7z2407-x64] HTTPSender Post succeeded
(93)      [6] [2024-07-30 10:15:07.653] [aaa_7z2407-x64] Server-FQDN: srvvmopsi.srv.local Server-IP: 192.168.123.242
(94)      [6] [2024-07-30 10:15:07.653] [aaa_7z2407-x64] JSON Bench for productOnClient_getObjects "params":["",{"clientId":"srvvmcl08.srv.local","pr Start: 10:15:07:644 Time: 00:00:00:009
(95)      [6] [2024-07-30 10:15:07.664] [aaa_7z2407-x64] HTTPSender Post succeeded
(96)      [6] [2024-07-30 10:15:07.664] [aaa_7z2407-x64] Server-FQDN: srvvmopsi.srv.local Server-IP: 192.168.123.242
(97)      [6] [2024-07-30 10:15:07.664] [aaa_7z2407-x64] JSON Bench for productOnClient_updateObject "params":[{"clientId":"srvvmcl08.srv.local","actio Start: 10:15:07:654 Time: 00:00:00:010
(98)      [6] [2024-07-30 10:15:07.664] [aaa_7z2407-x64] scriptname: "setup.opsiscript", special path: "y:\aaa_7z2407-x64\"
(99)      [6] [2024-07-30 10:15:07.664] [aaa_7z2407-x64] Using new Depot path:  y:\
(100)     [7] [2024-07-30 10:15:07.676] [aaa_7z2407-x64] Load from Unicode file
(101)     [1] [2024-07-30 10:15:07.680] [aaa_7z2407-x64] 
(102)     [1] [2024-07-30 10:15:07.680] [aaa_7z2407-x64] ============ Version 4.12.15.3 script "y:\aaa_7z2407-x64\setup.opsiscript"
(103)     [1] [2024-07-30 10:15:07.680] [aaa_7z2407-x64]              used script encoding: utf8
(104)     [1] [2024-07-30 10:15:07.680] [aaa_7z2407-x64]              used system encoding: cp1252
(105)     [1] [2024-07-30 10:15:07.680] [aaa_7z2407-x64]              start: 2024-07-30  10:15:07
(106)     [1] [2024-07-30 10:15:07.680] [aaa_7z2407-x64]              installing product: aaa_7z2407-x64_24.07.00.0-1
(107)     [1] [2024-07-30 10:15:07.681] [aaa_7z2407-x64]              on client named    "srvvmcl08.srv.local"
(108)     [1] [2024-07-30 10:15:07.681] [aaa_7z2407-x64]              loggedin user    ""
(109)     [1] [2024-07-30 10:15:07.682] [aaa_7z2407-x64]              opsi-script running as    "SYSTEM"
(110)     [1] [2024-07-30 10:15:07.682] [aaa_7z2407-x64]              opsi-script running with admin privileges
(111)     [1] [2024-07-30 10:15:07.682] [aaa_7z2407-x64]              opsi-script running in standard script mode
(112)     [1] [2024-07-30 10:15:07.682] [aaa_7z2407-x64] Scaling for screen DPI: 96
(113)     [1] [2024-07-30 10:15:07.682] [aaa_7z2407-x64] executing: "C:\Program Files (x86)\opsi.org\opsi-client-agent\opsi-script\opsi-script.exe"
(114)     [1] [2024-07-30 10:15:07.682] [aaa_7z2407-x64] system infos:
(115)     [1] [2024-07-30 10:15:07.684] [aaa_7z2407-x64] 00-15-5D-7D-23-13  -  PC hardware address
(116)     [1] [2024-07-30 10:15:07.684] [aaa_7z2407-x64] srvVMCL08.srv.local  -  IP name
(117)     [1] [2024-07-30 10:15:07.684] [aaa_7z2407-x64] 192.168.123.166  -  IP address
(118)     [1] [2024-07-30 10:15:07.684] [aaa_7z2407-x64] DEU  -  System default locale
(119)     [7] [2024-07-30 10:15:07.685] [aaa_7z2407-x64] Registry started without redirection (64 Bit)
(120)     [7] [2024-07-30 10:15:07.685] [aaa_7z2407-x64] Registry started readonly
(121)     [7] [2024-07-30 10:15:07.685] [aaa_7z2407-x64] Registry started without redirection (64 Bit)
(122)     [6] [2024-07-30 10:15:07.685] [aaa_7z2407-x64] Registry key [HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion] opened
(123)     [6] [2024-07-30 10:15:07.685] [aaa_7z2407-x64] Key closed
(124)     [7] [2024-07-30 10:15:07.685] [aaa_7z2407-x64] Registry started without redirection (64 Bit)
(125)     [7] [2024-07-30 10:15:07.685] [aaa_7z2407-x64] Registry started readonly
(126)     [7] [2024-07-30 10:15:07.685] [aaa_7z2407-x64] Registry started without redirection (64 Bit)
(127)     [6] [2024-07-30 10:15:07.685] [aaa_7z2407-x64] Registry key [HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion] opened
(128)     [6] [2024-07-30 10:15:07.685] [aaa_7z2407-x64] Key closed
(129)     [1] [2024-07-30 10:15:07.685] [aaa_7z2407-x64] MS Windows 10.0 (10.0) 64 Bit, Release: 22H2, Edition: Enterprise Edition
(130)     [6] [2024-07-30 10:15:07.690] [aaa_7z2407-x64] HTTPSender Post succeeded
(131)     [6] [2024-07-30 10:15:07.690] [aaa_7z2407-x64] Server-FQDN: srvvmopsi.srv.local Server-IP: 192.168.123.242
(132)     [6] [2024-07-30 10:15:07.690] [aaa_7z2407-x64] JSON Bench for backend_info "params":[],"id":1} Start: 10:15:07:685 Time: 00:00:00:005
(133)     [1] [2024-07-30 10:15:07.693] [aaa_7z2407-x64] opsi service version : 4 (4.3.18.18)
(134)     [1] [2024-07-30 10:15:07.693] [aaa_7z2407-x64] 
(135)     [7] [2024-07-30 10:15:07.696] [aaa_7z2407-x64] Registry started readonly
(136)     [7] [2024-07-30 10:15:07.696] [aaa_7z2407-x64] Registry started without redirection (64 Bit)
(137)     [6] [2024-07-30 10:15:07.696] [aaa_7z2407-x64] Registry key [HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion] opened
(138)     [6] [2024-07-30 10:15:07.696] [aaa_7z2407-x64] Key closed
(139)     [6] [2024-07-30 10:15:07.701] [aaa_7z2407-x64] Try getting FQDN with WMI:
(140)     [6] [2024-07-30 10:15:07.743] [aaa_7z2407-x64] WMI result for FQDN: srvVMCL08.srv.local
(141)     [7] [2024-07-30 10:15:07.746] [aaa_7z2407-x64] Starting with script...
(142)     [6] [2024-07-30 10:15:07.746] [aaa_7z2407-x64] opsi-script has version  4.12.15.3, required is : >= 4.12.5.0
(143)     [7] [2024-07-30 10:15:07.746] [aaa_7z2407-x64] Found ImportLib statement for file: uib_exitcode.opsiscript and function:
(144)     [7] [2024-07-30 10:15:07.753] [aaa_7z2407-x64] Load from file with encoding: system
(145)     [7] [2024-07-30 10:15:07.754] [aaa_7z2407-x64] Load from file with encoding: utf8
(146)     [5] [2024-07-30 10:15:07.779] [aaa_7z2407-x64] Imported all functions from file: C:\Program Files (x86)\opsi.org\opsi-client-agent\opsi-script\lib\uib_exitcode.opsiscript
(147)     [6] [2024-07-30 10:15:07.783] [aaa_7z2407-x64] Added defined function: ismsiexitcodefatal to the known functions
(148)     [6] [2024-07-30 10:15:07.785] [aaa_7z2407-x64] Added defined function: ismsiexitcodefatal_short to the known functions
(149)     [6] [2024-07-30 10:15:07.785] [aaa_7z2407-x64] Added defined function: ismsexitcodefatal_short to the known functions
(150)     [6] [2024-07-30 10:15:07.787] [aaa_7z2407-x64] Added defined function: isadvancedmsiexitcodefatal to the known functions
(151)     [6] [2024-07-30 10:15:07.789] [aaa_7z2407-x64] Added defined function: isinnoexitcodefatal to the known functions
(152)     [6] [2024-07-30 10:15:07.791] [aaa_7z2407-x64] Added defined function: isinstallshieldexitcodefatal to the known functions
(153)     [6] [2024-07-30 10:15:07.793] [aaa_7z2407-x64] Added defined function: isnsisexitcodefatal to the known functions
(154)     [6] [2024-07-30 10:15:07.794] [aaa_7z2407-x64] Added defined function: isgenericexitcodefatal to the known functions
(155)     [6] [2024-07-30 10:15:07.795] [aaa_7z2407-x64] Added defined function: booltogenericexitcode to the known functions
(156)     [7] [2024-07-30 10:15:07.795] [aaa_7z2407-x64] Found ImportLib statement for file: osd-lib.opsiscript and function:
(157)     [7] [2024-07-30 10:15:07.804] [aaa_7z2407-x64] Load from file with encoding: system
(158)     [7] [2024-07-30 10:15:07.808] [aaa_7z2407-x64] Load from file with encoding: utf8
(159)     [5] [2024-07-30 10:15:07.821] [aaa_7z2407-x64] Imported all functions from file: y:\aaa_7z2407-x64\osd-lib.opsiscript
(160)     [6] [2024-07-30 10:15:07.824] [aaa_7z2407-x64] Added defined function: escaperegexmetachars to the known functions
(161)     [6] [2024-07-30 10:15:07.825] [aaa_7z2407-x64] Added defined function: getguidlistbydisplaynameregex to the known functions
(162)     [6] [2024-07-30 10:15:07.826] [aaa_7z2407-x64] Added defined function: checkformsiproduct to the known functions
(163)     [6] [2024-07-30 10:15:07.828] [aaa_7z2407-x64] Added defined function: checkformsidisplayname to the known functions
(164)     [6] [2024-07-30 10:15:07.830] [aaa_7z2407-x64] Added defined function: get_licensekey_bypoolorkey to the known functions
(165)     [6] [2024-07-30 10:15:07.831] [aaa_7z2407-x64] Added defined function: get_licensekey_bypool to the known functions
(166)     [6] [2024-07-30 10:15:07.833] [aaa_7z2407-x64] Added defined function: desktopicon_create to the known functions
(167)     [6] [2024-07-30 10:15:07.835] [aaa_7z2407-x64] Added defined function: desktopicon_remove to the known functions
(168)     [7] [2024-07-30 10:15:07.835] [aaa_7z2407-x64] Found Include_insert statement for: declarations.opsiinc
(169)     [7] [2024-07-30 10:15:07.842] [aaa_7z2407-x64] Load from file with encoding: system
(170)     [7] [2024-07-30 10:15:07.845] [aaa_7z2407-x64] Load from file with encoding: utf8
(171)     [6] [2024-07-30 10:15:07.847] [aaa_7z2407-x64] Included (insert) file: y:\aaa_7z2407-x64\declarations.opsiinc with encoding: utf8
(172)     [6] [2024-07-30 10:15:07.850] [aaa_7z2407-x64]   The value of the variable "$productName$" is now: "7-Zip 24.07 (x64 edition)"
(173)     [7] [2024-07-30 10:15:07.851] [aaa_7z2407-x64] defined global string list $UninstallList$
(174)     [7] [2024-07-30 10:15:07.851] [aaa_7z2407-x64] Found Include_append statement for: sections.opsiinc
(175)     [7] [2024-07-30 10:15:07.860] [aaa_7z2407-x64] Load from file with encoding: system
(176)     [7] [2024-07-30 10:15:07.862] [aaa_7z2407-x64] Load from file with encoding: utf8
(177)     [6] [2024-07-30 10:15:07.865] [aaa_7z2407-x64] Included (append) file: y:\aaa_7z2407-x64\sections.opsiinc with encoding: utf8
(178)     [5] [2024-07-30 10:15:07.865] [aaa_7z2407-x64] comment: put fixed infos into the script (maybe produced by the setup detector maybe manually)
(179)     [6] [2024-07-30 10:15:07.865] [aaa_7z2407-x64]   The value of the variable "$ProductId$" is now: "aaa_7z2407-x64"
(180)     [6] [2024-07-30 10:15:07.865] [aaa_7z2407-x64]   The value of the variable "$InstallDir$" is now: "C:\Program Files\7-Zip"
(181)     [6] [2024-07-30 10:15:07.866] [aaa_7z2407-x64]   The value of the variable "$targetprogram$" is now: ""
(182)     [6] [2024-07-30 10:15:07.866] [aaa_7z2407-x64]   The value of the variable "$MinimumSpace$" is now: "11 MB"
(183)     [6] [2024-07-30 10:15:07.866] [aaa_7z2407-x64]   The value of the variable "$OS$" is now: "Windows_NT"
(184)     [5] [2024-07-30 10:15:07.867] [aaa_7z2407-x64] message Installing aaa_7z2407-x64 ...
(185)     [5] [2024-07-30 10:15:07.873] [aaa_7z2407-x64] comment: check if the script is adequate to the environment
(186)     [6] [2024-07-30 10:15:07.874] [aaa_7z2407-x64] If
(187)     [7] [2024-07-30 10:15:07.877] [aaa_7z2407-x64]   $OS$ = "Windows_NT"   <<< result true
(188)     [7] [2024-07-30 10:15:07.877] [aaa_7z2407-x64]   ($OS$ = "Windows_NT")   <<< result true
(189)     [6] [2024-07-30 10:15:07.877] [aaa_7z2407-x64]   not(($OS$ = "Windows_NT"))   <<< result false
(190)     [6] [2024-07-30 10:15:07.877] [aaa_7z2407-x64] Then
(191)     [6] [2024-07-30 10:15:07.877] [aaa_7z2407-x64] EndIf
(192)     [6] [2024-07-30 10:15:07.877] [aaa_7z2407-x64] If
(193)     [6] [2024-07-30 10:15:07.877] [aaa_7z2407-x64]     Free on Disk C:: 92.523.741.184 bytes  This is more than the required amount of 11.000.000 bytes
(194)     [7] [2024-07-30 10:15:07.877] [aaa_7z2407-x64]   HasMinimumSpace ("C:", $MinimumSpace$)   <<< result true
(195)     [6] [2024-07-30 10:15:07.877] [aaa_7z2407-x64]   not(HasMinimumSpace ("C:", $MinimumSpace$))   <<< result false
(196)     [6] [2024-07-30 10:15:07.877] [aaa_7z2407-x64] Then
(197)     [6] [2024-07-30 10:15:07.878] [aaa_7z2407-x64] EndIf
(198)     [5] [2024-07-30 10:15:07.878] [aaa_7z2407-x64] comment: inform the user at the PC about product installation
(199)     [5] [2024-07-30 10:15:07.878] [aaa_7z2407-x64] comment: Show product picture
(200)     [6] [2024-07-30 10:15:07.897] [aaa_7z2407-x64]   The value of the variable "$installerSourceDir$" is now: "y:\aaa_7z2407-x64\files1"
(201)     [6] [2024-07-30 10:15:07.897] [aaa_7z2407-x64] If
(202)     [6] [2024-07-30 10:15:07.897] [aaa_7z2407-x64]     Starting query if file y:\aaa_7z2407-x64\delinc.opsiinc exists ...
(203)     [6] [2024-07-30 10:15:07.902] [aaa_7z2407-x64]   FileExists("y:\aaa_7z2407-x64\delinc.opsiinc")   <<< result true
(204)     [6] [2024-07-30 10:15:07.902] [aaa_7z2407-x64] Then
(205)     [5] [2024-07-30 10:15:07.902] [aaa_7z2407-x64]   comment: Start uninstall part
(206)     [7] [2024-07-30 10:15:07.902] [aaa_7z2407-x64]   Found Include_insert statement for: y:\aaa_7z2407-x64\delinc.opsiinc
(207)     [7] [2024-07-30 10:15:07.907] [aaa_7z2407-x64]   Load from file with encoding: system
(208)     [7] [2024-07-30 10:15:07.911] [aaa_7z2407-x64]   Load from file with encoding: utf8
(209)     [6] [2024-07-30 10:15:07.913] [aaa_7z2407-x64]   Included (insert) file: y:\aaa_7z2407-x64\delinc.opsiinc with encoding: utf8
(210)     [5] [2024-07-30 10:15:07.914] [aaa_7z2407-x64]   comment: check if there is something to uninstall
(211)     [5] [2024-07-30 10:15:07.930] [aaa_7z2407-x64]   message Check for existing installation of aaa_7z2407-x64 ...
(212)     [5] [2024-07-30 10:15:07.934] [aaa_7z2407-x64]   comment: Start the Uninstall check:
(213)     [6] [2024-07-30 10:15:07.934] [aaa_7z2407-x64]     The value of the variable "$DisplayName$" is now: "7-Zip 24.07 (x64 edition)"
(214)     [6] [2024-07-30 10:15:07.939] [aaa_7z2407-x64]     The value of the variable "$DisplayNameRegex$" is now: "7-Zip 24\.07 \(x64 edition\)"
(215)     [6] [2024-07-30 10:15:07.940] [aaa_7z2407-x64]     The value of the variable "$DisplayNameRegex$" is now: "(?i)7-Zip 24\.07 \(x64 edition\).*"
(216)     [7] [2024-07-30 10:15:08.041] [aaa_7z2407-x64]     The value of the variable "$UninstallList$" is now:
(217)     [5] [2024-07-30 10:15:08.042] [aaa_7z2407-x64]   comment: run the uninstallation
(218)     [6] [2024-07-30 10:15:08.042] [aaa_7z2407-x64]   If
(219)     [6] [2024-07-30 10:15:08.042] [aaa_7z2407-x64]     count($UninstallList$) int> "0"   <<< result false
(220)     [6] [2024-07-30 10:15:08.042] [aaa_7z2407-x64]   Then
(221)     [6] [2024-07-30 10:15:08.042] [aaa_7z2407-x64]   EndIf
(222)     [5] [2024-07-30 10:15:08.042] [aaa_7z2407-x64]   comment: cleanup installation directory
(223)     [6] [2024-07-30 10:15:08.042] [aaa_7z2407-x64]   If
(224)     [7] [2024-07-30 10:15:08.042] [aaa_7z2407-x64]     $InstallDir$ = ''   <<< result false
(225)     [7] [2024-07-30 10:15:08.043] [aaa_7z2407-x64]     $InstallDir$ = 'unknown'   <<< result false
(226)     [7] [2024-07-30 10:15:08.043] [aaa_7z2407-x64]     ($InstallDir$ = 'unknown')   <<< result false
(227)     [7] [2024-07-30 10:15:08.043] [aaa_7z2407-x64]     ($InstallDir$ = '') or ($InstallDir$ = 'unknown')   <<< result false
(228)     [6] [2024-07-30 10:15:08.043] [aaa_7z2407-x64]     not(($InstallDir$ = '') or ($InstallDir$ = 'unknown'))   <<< result true
(229)     [6] [2024-07-30 10:15:08.043] [aaa_7z2407-x64]   Then
(230)     [6] [2024-07-30 10:15:08.043] [aaa_7z2407-x64]     If
(231)     [6] [2024-07-30 10:15:08.043] [aaa_7z2407-x64]       Starting query if directory C:\Program Files\7-Zip exists ...
(232)     [6] [2024-07-30 10:15:08.043] [aaa_7z2407-x64]       DisableWow64FsRedirection succeeded
(233)     [6] [2024-07-30 10:15:08.043] [aaa_7z2407-x64]       RevertWow64FsRedirection succeeded
(234)     [6] [2024-07-30 10:15:08.043] [aaa_7z2407-x64]       directoryexists($InstallDir$)   <<< result false
(235)     [6] [2024-07-30 10:15:08.043] [aaa_7z2407-x64]     Then
(236)     [6] [2024-07-30 10:15:08.043] [aaa_7z2407-x64]     EndIf
(237)     [6] [2024-07-30 10:15:08.043] [aaa_7z2407-x64]   EndIf
(238)     [6] [2024-07-30 10:15:08.043] [aaa_7z2407-x64] EndIf
(239)     [5] [2024-07-30 10:15:08.044] [aaa_7z2407-x64] message Installing aaa_7z2407-x64 ...
(240)     [5] [2024-07-30 10:15:08.047] [aaa_7z2407-x64] comment: run  the setup program
(241)     [6] [2024-07-30 10:15:08.051] [aaa_7z2407-x64] Changed current directory to y:\aaa_7z2407-x64\files1
(242)     [5] [2024-07-30 10:15:08.051] [aaa_7z2407-x64] Execution of: Winbatch_install_1 /sysnative
(243)     [7] [2024-07-30 10:15:08.057] [aaa_7z2407-x64]   Window state was switched by : TFBatchOberflaeche to: wsNormal
(244)     [6] [2024-07-30 10:15:08.078] [aaa_7z2407-x64]   Call "msiexec /i "y:\aaa_7z2407-x64\files1\7z2407-x64.msi" /l* "c:\opsi.org\log\aaa_7z2407-x64.install_log.txt" /qn"
(245)     [6] [2024-07-30 10:15:08.078] [aaa_7z2407-x64]      Waiting until the called process is finished
(246)     [6] [2024-07-30 10:15:08.079] [aaa_7z2407-x64]   Start process as invoker: SYSTEM
(247)     [6] [2024-07-30 10:15:08.093] [aaa_7z2407-x64]   Started process "msiexec" with Opt: /i\r\n"y:\aaa_7z2407-x64\files1\7z2407-x64.msi"\r\n/l*\r\n"c:\opsi.org\log\aaa_7z2407-x64.install_log.txt"\r\n/qn
(248)     [6] [2024-07-30 10:15:11.868] [aaa_7z2407-x64]   ExitCode 1612    Executed process "msiexec /i "y:\aaa_7z2407-x64\files1\7z2407-x64.msi" /l* "c:\opsi.org\log\aaa_7z2407-x64.install_log.txt" /qn"
(249)     [7] [2024-07-30 10:15:11.868] [aaa_7z2407-x64]     output:
(250)     [7] [2024-07-30 10:15:11.868] [aaa_7z2407-x64]     --------------
(251)     [7] [2024-07-30 10:15:11.868] [aaa_7z2407-x64]     D
(252)     [7] [2024-07-30 10:15:11.868] [aaa_7z2407-x64]     --------------
(253)     [5] [2024-07-30 10:15:11.875] [aaa_7z2407-x64] comment: check the result
(254)     [6] [2024-07-30 10:15:11.876] [aaa_7z2407-x64]   The value of the variable "$ExitCode$" is now: "1612"
(255)     [6] [2024-07-30 10:15:11.876] [aaa_7z2407-x64] If
(256)     [7] [2024-07-30 10:15:11.898] [aaa_7z2407-x64]   "true" = isMsiExitcodeFatal($exitcode$, "true", $ErrorString$ )   <<< result true
(257)     [6] [2024-07-30 10:15:11.898] [aaa_7z2407-x64] Then
(258)     [7] [2024-07-30 10:15:11.899] [aaa_7z2407-x64]   Start including tail of LogFile "c:\opsi.org\log\aaa_7z2407-x64.install_log.txt with encoding: utf16le"
(259)     [7] [2024-07-30 10:15:11.899] [aaa_7z2407-x64]   ################################################################
(260)     [7] [2024-07-30 10:15:11.899] [aaa_7z2407-x64]   ################################################################
(261)     [7] [2024-07-30 10:15:11.899] [aaa_7z2407-x64]   End including LogFile "c:\opsi.org\log\aaa_7z2407-x64.install_log.txt"
(262)     [3] [2024-07-30 10:15:11.899] [aaa_7z2407-x64]   Error: ExitCode = 1612 ERROR_INSTALL_SOURCE_ABSENT The installation source for this product is not available. Verify that the source exists and that you can access it.
(263)     [2] [2024-07-30 10:15:11.899] [aaa_7z2407-x64]   Error level set to fatal: ExitCode = 1612 ERROR_INSTALL_SOURCE_ABSENT The installation source for this product is not available. Verify that the source exists and that you can access it.
(264)     [6] [2024-07-30 10:15:11.899] [aaa_7z2407-x64]   Process aborted
(265)     [1] [2024-07-30 10:15:11.900] [aaa_7z2407-x64] ___________________
(266)     [1] [2024-07-30 10:15:11.900] [aaa_7z2407-x64] script finished: failed
(267)     [1] [2024-07-30 10:15:11.900] [aaa_7z2407-x64] 1 error
(268)     [1] [2024-07-30 10:15:11.900] [aaa_7z2407-x64] 0 warnings
(269)     [1] [2024-07-30 10:15:11.900] [aaa_7z2407-x64] Exitcode will be: 1
(270)     [1] [2024-07-30 10:15:11.900] [aaa_7z2407-x64] 
(271)     [1] [2024-07-30 10:15:11.900] [aaa_7z2407-x64] handled product: aaa_7z2407-x64 Version: 24.07.00.0-1
(272)     [1] [2024-07-30 10:15:11.900] [aaa_7z2407-x64] 
(273)     [5] [2024-07-30 10:15:11.900] [aaa_7z2407-x64] We do not look for a update script, because the setup script is failed
(274)     [7] [2024-07-30 10:15:11.900] [aaa_7z2407-x64] BuildPC: update switches .....
(275)     [7] [2024-07-30 10:15:11.900] [aaa_7z2407-x64] productVersion: 24.07.00.0 (TOPsi4Data.ProductOnClient_update)
(276)     [6] [2024-07-30 10:15:11.916] [aaa_7z2407-x64] HTTPSender Post succeeded
(277)     [6] [2024-07-30 10:15:11.916] [aaa_7z2407-x64] Server-FQDN: srvvmopsi.srv.local Server-IP: 192.168.123.242
(278)     [6] [2024-07-30 10:15:11.916] [aaa_7z2407-x64] JSON Bench for productOnClient_updateObject "params":[{"clientId":"srvvmcl08.srv.local","actio Start: 10:15:11:900 Time: 00:00:00:016

[ThomasT]

Hallo,

da die *.opsiscript Dateien gelesen werden können würde ich jetzt mal nicht von einem Zugriffsproblem ausgehen, schau trotzdem bitte mal in der /etc/samba/smb.conf ob in der "opsi_depot" Freigabe

Code: Alles auswählen

acl allow execute always = true

gesetzt ist.
Das geschieht normalerweise automatisch, es sei denn man hat das manuell rauskonfiguriert.
Bitte schau mal im Verzeichnis /var/lib/opsi/depot/aaa_7z2407-x64/files1/ auch tatsächlich eine Datei 7z2407-x64.msi liegt.
Mir kommt das "files1" etwas komisch vor, also warum die 1 am Ende?

[Andi_089]

Mir kommt das "files1" etwas komisch vor, also warum die 1 am Ende?

Grüß dich,

das mit den "files1" passt schon, das macht der Setup-Detector inzwischen so, wenn man ihn vollautomatisch wurschteln lässt.

[yafnag]

Hier die entsprechenden Abschnitte aus der smb.conf:

Code: Alles auswählen

[opsi_depot]
   available = yes
   comment = opsi depot share (ro)
   path = /var/lib/opsi/depot
   follow symlinks = yes
   writeable = no
   invalid users = root
   acl allow execute always = true

[opsi_depot_rw]
   available = yes
   comment = opsi depot share (rw)
   path = /var/lib/opsi/depot
   follow symlinks = yes
   writeable = yes
   invalid users = root
   create mask = 0660
   directory mask = 0770
   acl allow execute always = true

Die msi-Datei ist auch an der korrekten Stelle zu finden.
Die Rechte auf diese sind: opsiconfd (rw), opsifileadmins (rw)

Ausserdem habe ich den Server mal auf webdav umgestellt.
Auf diese Weise läuft die Installation von 7-Zip und zweier weiterer Pakte (Adobe Reader und FileZilla) fehlerfrei durch.

[SisterOfMercy]

Please post your entire smb.conf

[yafnag]

Here you are:

Code: Alles auswählen

#
# Sample configuration file for the Samba suite for Debian GNU/Linux.
#
#
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options most of which 
# are not shown in this example
#
# Some options that are often worth tuning have been included as
# commented-out examples in this file.
#  - When such options are commented with ";", the proposed setting
#    differs from the default Samba behaviour
#  - When commented with "#", the proposed setting is the default
#    behaviour of Samba but the option is considered important
#    enough to be mentioned here
#
# NOTE: Whenever you modify this file you should run the command
# "testparm" to check that you have not made any basic syntactic 
# errors. 

#======================= Global Settings =======================

[global]

## Browsing/Identification ###

# Change this to the workgroup/NT-domain name your Samba server will part of
   workgroup = WORKGROUP

#### Networking ####

# The specific set of interfaces / networks to bind to
# This can be either the interface name or an IP address/netmask;
# interface names are normally preferred
;   interfaces = 127.0.0.0/8 eth0

# Only bind to the named interfaces and/or networks; you must use the
# 'interfaces' option above to use this.
# It is recommended that you enable this feature if your Samba machine is
# not protected by a firewall or is a firewall itself.  However, this
# option cannot handle dynamic or non-broadcast interfaces correctly.
;   bind interfaces only = yes



#### Debugging/Accounting ####

# This tells Samba to use a separate log file for each machine
# that connects
   log file = /var/log/samba/log.%m

# Cap the size of the individual log files (in KiB).
   max log size = 1000

# We want Samba to only log to /var/log/samba/log.{smbd,nmbd}.
# Append syslog@1 if you want important messages to be sent to syslog too.
   logging = file

# Do something sensible when Samba crashes: mail the admin a backtrace
   panic action = /usr/share/samba/panic-action %d


####### Authentication #######

# Server role. Defines in which mode Samba will operate. Possible
# values are "standalone server", "member server", "classic primary
# domain controller", "classic backup domain controller", "active
# directory domain controller". 
#
# Most people will want "standalone server" or "member server".
# Running as "active directory domain controller" will require first
# running "samba-tool domain provision" to wipe databases and create a
# new domain.
   server role = standalone server

   obey pam restrictions = yes

# This boolean parameter controls whether Samba attempts to sync the Unix
# password with the SMB password when the encrypted SMB password in the
# passdb is changed.
   unix password sync = yes

# For Unix password sync to work on a Debian GNU/Linux system, the following
# parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for
# sending the correct chat script for the passwd program in Debian Sarge).
   passwd program = /usr/bin/passwd %u
   passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .

# This boolean controls whether PAM will be used for password changes
# when requested by an SMB client instead of the program listed in
# 'passwd program'. The default is 'no'.
   pam password change = yes

# This option controls how unsuccessful authentication attempts are mapped
# to anonymous connections
   map to guest = bad user

########## Domains ###########

#
# The following settings only takes effect if 'server role = classic
# primary domain controller', 'server role = classic backup domain controller'
# or 'domain logons' is set 
#

# It specifies the location of the user's
# profile directory from the client point of view) The following
# required a [profiles] share to be setup on the samba server (see
# below)
;   logon path = \\%N\profiles\%U
# Another common choice is storing the profile in the user's home directory
# (this is Samba's default)
#   logon path = \\%N\%U\profile

# The following setting only takes effect if 'domain logons' is set
# It specifies the location of a user's home directory (from the client
# point of view)
;   logon drive = H:
#   logon home = \\%N\%U

# The following setting only takes effect if 'domain logons' is set
# It specifies the script to run during logon. The script must be stored
# in the [netlogon] share
# NOTE: Must be store in 'DOS' file format convention
;   logon script = logon.cmd

# This allows Unix users to be created on the domain controller via the SAMR
# RPC pipe.  The example command creates a user account with a disabled Unix
# password; please adapt to your needs
; add user script = /usr/sbin/useradd --create-home %u

# This allows machine accounts to be created on the domain controller via the 
# SAMR RPC pipe.  
# The following assumes a "machines" group exists on the system
; add machine script  = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u

# This allows Unix groups to be created on the domain controller via the SAMR
# RPC pipe.  
; add group script = /usr/sbin/addgroup --force-badname %g

############ Misc ############

# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
;   include = /home/samba/etc/smb.conf.%m

# Some defaults for winbind (make sure you're not using the ranges
# for something else.)
;   idmap config * :              backend = tdb
;   idmap config * :              range   = 3000-7999
;   idmap config YOURDOMAINHERE : backend = tdb
;   idmap config YOURDOMAINHERE : range   = 100000-999999
;   template shell = /bin/bash

# Setup usershare options to enable non-root users to share folders
# with the net usershare command.

# Maximum number of usershare. 0 means that usershare is disabled.
#   usershare max shares = 100

# Allow users who've been granted usershare privileges to create
# public shares, not just authenticated ones
   usershare allow guests = yes

#======================= Share Definitions =======================

[homes]
   comment = Home Directories
   browseable = no

# By default, the home directories are exported read-only. Change the
# next parameter to 'no' if you want to be able to write to them.
   read only = yes

# File creation mask is set to 0700 for security reasons. If you want to
# create files with group=rw permissions, set next parameter to 0775.
   create mask = 0700

# Directory creation mask is set to 0700 for security reasons. If you want to
# create dirs. with group=rw permissions, set next parameter to 0775.
   directory mask = 0700

# By default, \\server\username shares can be connected to by anyone
# with access to the samba server.
# The following parameter makes sure that only "username" can connect
# to \\server\username
# This might need tweaking when using external authentication schemes
   valid users = %S

# Un-comment the following and create the netlogon directory for Domain Logons
# (you need to configure Samba to act as a domain controller too.)
;[netlogon]
;   comment = Network Logon Service
;   path = /home/samba/netlogon
;   guest ok = yes
;   read only = yes

# Un-comment the following and create the profiles directory to store
# users profiles (see the "logon path" option above)
# (you need to configure Samba to act as a domain controller too.)
# The path below should be writable by all users so that their
# profile directory may be created the first time they log on
;[profiles]
;   comment = Users profiles
;   path = /home/samba/profiles
;   guest ok = no
;   browseable = no
;   create mask = 0600
;   directory mask = 0700

[printers]
   comment = All Printers
   browseable = no
   path = /var/tmp
   printable = yes
   guest ok = no
   read only = yes
   create mask = 0700

# Windows clients look for this share name as a source of downloadable
# printer drivers
[print$]
   comment = Printer Drivers
   path = /var/lib/samba/printers
   browseable = yes
   read only = yes
   guest ok = no
# Uncomment to allow remote administration of Windows print drivers.
# You may need to replace 'lpadmin' with the name of the group your
# admin users are members of.
# Please note that you also need to set appropriate Unix permissions
# to the drivers directory for these users to have write rights in it
;   write list = root, @lpadmin


[opsi_depot]
   available = yes
   comment = opsi depot share (ro)
   path = /var/lib/opsi/depot
   follow symlinks = yes
   writeable = no
   invalid users = root
   acl allow execute always = true

[opsi_depot_rw]
   available = yes
   comment = opsi depot share (rw)
   path = /var/lib/opsi/depot
   follow symlinks = yes
   writeable = yes
   invalid users = root
   create mask = 0660
   directory mask = 0770
   acl allow execute always = true

[opsi_images]
   available = yes
   comment = opsi ntfs images share (rw)
   path = /var/lib/opsi/ntfs-images
   writeable = yes
   invalid users = root
   create mask = 0660
   directory mask = 0770

[opsi_workbench]
   available = yes
   comment = opsi workbench
   path = /var/lib/opsi/workbench
   writeable = yes
   invalid users = root pcpatch
   create mask = 0660
   directory mask = 0770
   acl allow execute always = true

[opsi_repository]
   available = yes
   comment = opsi repository share (ro)
   path = /var/lib/opsi/repository
   follow symlinks = yes
   writeable = no
   invalid users = root pcpatch

[opsi_logs]
   available = yes
   comment = opsi logs share (ro)
   path = /var/log/opsi
   follow symlinks = yes
   writeable = no
   invalid users = root pcpatch

smb.conf has been created by the quick-install-script.

[SisterOfMercy]

Here you are:

*snip*

smb.conf has been created by the quick-install-script.

You have some weird settings in there, if you have a standard setup.

For instance "obey pam restrictions = yes" is not the default setting.

When Samba is configured to enable PAM support (i.e., --with-pam), this parameter will control whether or not Samba should obey PAM's account and session management directives. The default behavior is to use PAM for clear-text authentication only and to ignore any account or session management. Samba always ignores PAM for authentication in the case of encrypt passwords = yes. The reason is that PAM modules cannot support the challenge/response authentication mechanism needed in the presence of SMB password encryption.

Default: obey pam restrictions = no

If you have no particular need to set this to yes, I would recommend to dump this entire section.
You will then probably need to follow the documentation to recreate the pcpatch user and password for samba.

I think your issue is that the install script edited the default samba configuration you had available.

Try this:

Code: Alles auswählen

[global]
   workgroup = WORKGROUP
   security = user

   passdb backend = tdbsam

   printing = bsd
   printcap name = /dev/null
   load printers = no
   disable spoolss = yes

   preferred master = no
   local master = no
   domain master = no

[opsi_depot]
   available = yes
   comment = opsi depot share (ro)
   path = /var/lib/opsi/depot
   follow symlinks = yes
   writeable = no
   invalid users = root
   acl allow execute always = true

[opsi_depot_rw]
   available = yes
   comment = opsi depot share (rw)
   path = /var/lib/opsi/depot
   follow symlinks = yes
   writeable = yes
   invalid users = root
   create mask = 0660
   directory mask = 0770
   acl allow execute always = true

[opsi_images]
   available = yes
   comment = opsi ntfs images share (rw)
   path = /var/lib/opsi/ntfs-images
   writeable = yes
   invalid users = root
   create mask = 0660
   directory mask = 0770

[opsi_workbench]
   available = yes
   comment = opsi workbench
   path = /var/lib/opsi/workbench
   writeable = yes
   invalid users = root pcpatch
   create mask = 0660
   directory mask = 0770
   acl allow execute always = true

[opsi_repository]
   available = yes
   comment = opsi repository share (ro)
   path = /var/lib/opsi/repository
   follow symlinks = yes
   writeable = no
   invalid users = root pcpatch

[opsi_logs]
   available = yes
   comment = opsi logs share (ro)
   path = /var/log/opsi
   follow symlinks = yes
   writeable = no
   invalid users = root pcpatch

"security = user" Sets samba to use the simplest setup, with its own user database.
"passdb backend = tdbsam" The user/password database to use.

"printing = bsd" This and the four following lines are to completely disable printing.

"preferred master = no" And the three following lines are to stop the opsi server from fighting with my file server.

So in essence, the global section only contains three lines for the simplest working solution.