AutoCAD 2017 Installation
Verfasst: 02 Dez 2016, 11:25
Hallo zusammen,
nachdem gestern die SAP Installation geklappt hat, wollte ich mich heute an die Installation von AutoCAD machen.
Dazu muss ich die Setup.exe mit Parametern starten. AutoCAD gibt folgende Zeile vor:
Also dachte ich, mit
Müsste ich das ganze ja ausführen können.
Das ganze bringt aber zwei Probleme:
1. Unterstützt Batch ja keine UNC Pfade.... tut OPSI DosBatch dies?
2. Erhalte ich schon vorher einen Fehler
Anbei meine setup.opsiscript
nachdem gestern die SAP Installation geklappt hat, wollte ich mich heute an die Installation von AutoCAD machen.
Dazu muss ich die Setup.exe mit Parametern starten. AutoCAD gibt folgende Zeile vor:
Code: Alles auswählen
.\Img\Setup.exe /W /q /I Img\Autocad-2017-X64.ini /language de-deCode: Alles auswählen
\\Fileserver_1\Software\OPSI Softwaredepot\Autocad2017\Img\Setup.exe /W /q /I Img\Autocad-2017-X64.ini /language de-deDas ganze bringt aber zwei Probleme:
1. Unterstützt Batch ja keine UNC Pfade.... tut OPSI DosBatch dies?
2. Erhalte ich schon vorher einen Fehler
Code: Alles auswählen
141) [6] [Dez 02 11:22:51:750] [autocad2017x64-batch] ~~~~~~~ End Sub ~~~~~~~ Sub_check_exitcode
(142) [6] [Dez 02 11:22:51:750] [autocad2017x64-batch]
(143) [2] [Dez 02 11:22:51:750] [autocad2017x64-batch] Syntax Error in Section: Actions (Command in line 74 origin: p:\autocad2017x64-batch\setup32.opsiscript line: 75): DosBatch^ -> illegal String Expressionstr
(144) [2] [Dez 02 11:22:51:750] [autocad2017x64-batch] Syntax Error in Section: Actions (Command in line 75 origin: p:\autocad2017x64-batch\setup32.opsiscript line: 76): EndIf -> expected
(145) [1] [Dez 02 11:22:51:750] [autocad2017x64-batch] ___________________
(146) [1] [Dez 02 11:22:51:750] [autocad2017x64-batch] script finished
(147) [1] [Dez 02 11:22:51:750] [autocad2017x64-batch] 2 errors
(148) [1] [Dez 02 11:22:51:750] [autocad2017x64-batch] 1 warning
(149) [1] [Dez 02 11:22:51:750] [autocad2017x64-batch]
(150) [1] [Dez 02 11:22:51:750] [autocad2017x64-batch] installed product: autocad2017x64-batch Version: 1.0-1Code: Alles auswählen
; Copyright (c) uib gmbh (www.uib.de)
; This sourcecode is owned by uib
; and published under the Terms of the General Public License.
; credits: http://www.opsi.org/en/credits/
[Actions]
requiredWinstVersion >= "4.11.4.6"
ScriptErrorMessages=off
DefVar $MsiId$
DefVar $UninstallProgram$
DefVar $LogDir$
DefVar $ProductId$
DefVar $MinimumSpace$
DefVar $InstallDir$
DefVar $ExitCode$
DefVar $LicenseRequired$
DefVar $LicenseKey$
DefVar $LicensePool$
DefVar $myProperty$
Set $LogDir$ = "%opsiLogDir%"
; ----------------------------------------------------------------
; - Please edit the following values -
; ----------------------------------------------------------------
;$ProductId$ should be the name of the product in opsi
; therefore please: only lower letters, no umlauts,
; no white space use '-' as a seperator
Set $ProductId$ = "autocad2017x64-batch"
Set $MinimumSpace$ = "8096MB"
; the path were we find the product after the installation
Set $InstallDir$ = "%ProgramFiles32Dir%\Autodesk"
Set $LicenseRequired$ = "false"
Set $LicensePool$ = "p_" + $ProductId$
; ----------------------------------------------------------------
if not(HasMinimumSpace ("%SystemDrive%", $MinimumSpace$))
LogError "Not enough space on %SystemDrive%, " + $MinimumSpace$ + " on drive %SystemDrive% needed for " + $ProductId$
isFatalError "No Space"
; Stop process and set installation status to failed
else
comment "Show product picture"
ShowBitmap "%ScriptPath%\" + $ProductId$ + ".png" $ProductId$
comment "get property value ....."
set $myProperty$ = getProductProperty("dummy_prop", "yes")
if $myProperty$ = "yes"
comment "myproperty value is yes"
else
if $myProperty$ = "no"
comment "myproperty value is no"
else
comment "myproperty value must be may_be"
endif
endif
;if FileExists("%ScriptPath%\delsub32.opsiscript")
; comment "Start uninstall sub section"
; Sub "%ScriptPath%\delsub32.opsiscript"
;endif
Message "Installing " + $ProductId$ + " ..."
if $LicenseRequired$ = "true"
comment "Licensing required, reserve license and get license key"
Sub_get_licensekey
endif
comment "Start setup program"
ChangeDirectory "%SCRIPTPATH%"
Winbatch_install
Sub_check_exitcode
DosBatch
comment "Copy files"
Files_install /32Bit
comment "Patch Registry"
Registry_install /32Bit
comment "Create shortcuts"
LinkFolder_install
endif
[Winbatch_install]
; Choose one of the following examples as basis for your installation
; You can use $LicenseKey$ var to pass a license key to the installer
;
; === Nullsoft Scriptable Install System ================================================================
;
;
; === MSI package =======================================================================================
; You may use the parameter PIDKEY=$Licensekey$
; msiexec /i "%ScriptPath%\some.msi" /l* "$LogDir$\$ProductId$.install_log.txt" /qb-! ALLUSERS=1 REBOOT=ReallySuppress
;
; === InstallShield + MSI=====================================================================================
; Attention: The path to the log file should not contain any whitespaces
; "%ScriptPath%\setup.exe" /s /v" /l* $LogDir$\$ProductId$.install_log.txt /qb-! ALLUSERS=1 REBOOT=ReallySuppress"
; "%ScriptPath%\setup.exe" /s /v" /qb-! ALLUSERS=1 REBOOT=ReallySuppress"
;
; === InstallShield =====================================================================================
; Create setup.iss answer file by running: setup.exe /r /f1"c:\setup.iss"
; You may use an answer file by the parameter /f1"c:\setup.iss"
; "%ScriptPath%\setup.exe" /s /sms /f2"$LogDir$\$ProductId$.install_log.txt"
;
; === Inno Setup ========================================================================================
; http://unattended.sourceforge.net/InnoSetup_Switches_ExitCodes.html
; You may create setup answer file by: setup.exe /SAVEINF="filename"
; You may use an answer file by the parameter /LOADINF="filename"
; "%ScriptPath%\setup.exe" /sp- /silent /norestart /nocancel /SUPPRESSMSGBOXES
[DosBatch]
cd "\\fileserver_1\Software\OPSI Softwaredepot\Autocad2017\Img"
Setup.exe /W /q /I Autocad-2017-X64.ini /language de-de
[Files_install]
; Example of recursively copying some files into the installation directory:
;
; copy -s "%ScriptPath%\files\*.*" "$InstallDir$"
[Registry_install]
; Example of setting some values of an registry key:
;
; openkey [HKEY_LOCAL_MACHINE\Software\$ProductId$]
; set "name1" = "some string value"
; set "name2" = REG_DWORD:0001
; set "name3" = REG_BINARY:00 af 99 cd
[LinkFolder_install]
; Example of deleting a folder from AllUsers startmenu:
;
; set_basefolder common_programs
; delete_subfolder $ProductId$
;
; Example of creating an shortcut to the installed exe in AllUsers startmenu:
;
; set_basefolder common_programs
; set_subfolder $ProductId$
;
; set_link
; name: $ProductId$
; target: <path to the program>
; parameters:
; working_dir: $InstallDir$
; icon_file:
; icon_index:
; end_link
;
; Example of creating an shortcut to the installed exe on AllUsers desktop:
;
; set_basefolder common_desktopdirectory
; set_subfolder ""
;
; set_link
; name: $ProductId$
; target: <path to the program>
; parameters: <some_param>
; working_dir: $InstallDir$
; icon_file: <path to icon file>
; icon_index: 2
; end_link
[Sub_get_licensekey]
if opsiLicenseManagementEnabled
comment "License management is enabled and will be used"
comment "Trying to get a license key"
Set $LicenseKey$ = demandLicenseKey ($LicensePool$)
; If there is an assignment of exactly one licensepool to the product the following call is possible:
; Set $LicenseKey$ = demandLicenseKey ("", $ProductId$)
;
; If there is an assignment of a license pool to a windows software id, it is possible to use:
; DefVar $WindowsSoftwareId$
; $WindowsSoftwareId$ = "..."
; Set $LicenseKey$ = demandLicenseKey ("", "", $WindowsSoftwareId$)
DefVar $ServiceErrorClass$
set $ServiceErrorClass$ = getLastServiceErrorClass
comment "Error class: " + $ServiceErrorClass$
if $ServiceErrorClass$ = "None"
comment "Everything fine, we got the license key '" + $LicenseKey$ + "'"
else
if $ServiceErrorClass$ = "LicenseConfigurationError"
LogError "Fatal: license configuration must be corrected"
LogError getLastServiceErrorMessage
isFatalError
else
if $ServiceErrorClass$ = "LicenseMissingError"
LogError "Fatal: required license is not supplied"
isFatalError
endif
endif
endif
else
LogError "Fatal: license required, but license management not enabled"
isFatalError
endif
[Sub_check_exitcode]
comment "Test for installation success via exit code"
set $ExitCode$ = getLastExitCode
; informations to exit codes see
; http://msdn.microsoft.com/en-us/library/aa372835(VS.85).aspx
; http://msdn.microsoft.com/en-us/library/aa368542.aspx
if ($ExitCode$ = "0")
comment "Looks good: setup program gives exitcode zero"
else
comment "Setup program gives a exitcode unequal zero: " + $ExitCode$
if ($ExitCode$ = "1605")
comment "ERROR_UNKNOWN_PRODUCT 1605 This action is only valid for products that are currently installed."
comment "Uninstall of a not installed product failed - no problem"
else
if ($ExitCode$ = "1641")
comment "looks good: setup program gives exitcode 1641"
comment "ERROR_SUCCESS_REBOOT_INITIATED 1641 The installer has initiated a restart. This message is indicative of a success."
else
if ($ExitCode$ = "3010")
comment "looks good: setup program gives exitcode 3010"
comment "ERROR_SUCCESS_REBOOT_REQUIRED 3010 A restart is required to complete the install. This message is indicative of a success."
else
logError "Fatal: Setup program gives an unknown exitcode unequal zero: " + $ExitCode$
isFatalError
endif
endif
endif
endif
