forum.opsi.org

Hallo,

beim netboot Produkt debian8 setup hab ich trotz korrekter Proxy Einstellung einen http error 111 connection refused.

Um rauszukommen brauch ich einen Proxy - dessen Einstellung http://FQDN:3128 hab ich mittels einer Ubuntu Installation verifiziert - die lief auch problemlos durch.

Am Proxy selber hab ich die Einträge von der Ubuntu Installation aber keinen Zugriffsversuch der debian8 Installation - bin etwas ratlos wo der Fehler liegen könnte und ersuche um einen Hinweis. Weiter unten das log vom Installationsversuch

lg
Roland Jankoski



(1349) [5] [Nov 03 23:54:22] Getting kernel and initrd.... (debian8.py|275)
(1350) [7] [Nov 03 23:54:22] MessageSubject 'copy_overall' created (Message.py|99)
(1351) [7] [Nov 03 23:54:22] ProgressSubject 'copy_overall' created (Message.py|227)
(1352) [7] [Nov 03 23:54:22] MessageSubject 'copy_current' created (Message.py|99)
(1353) [7] [Nov 03 23:54:22] ProgressSubject 'copy_current' created (Message.py|227)
(1354) [6] [Nov 03 23:54:22] Copying from 'debian8/installfiles64/linux' to '/mnt/hd/tmp' (Repository.py|522)
(1355) [7] [Nov 03 23:54:22] Length of binary data to download: 3119232 bytes (Repository.py|742)
(1356) [7] [Nov 03 23:54:22] Transfer in from <open file u'/mnt/opsi/debian8/installfiles64/linux', mode 'rb' at 0x7f2e30910270> to <open file u'/mnt/hd/tmp/linux', mode 'wb' at 0x7f2e30910300>, dynamic bandwidth False, max bandwidth 0 (Repository.py|366)
(1357) [7] [Nov 03 23:54:22] Filesize is: 3119232 (Repository.py|377)
(1358) [6] [Nov 03 23:54:22] Transfered 3046.12 kByte in 0.00 minutes, average speed was 77261.66 kByte/s (Repository.py|418)
(1359) [6] [Nov 03 23:54:22] Copy done (Repository.py|608)
(1360) [7] [Nov 03 23:54:22] MessageSubject 'copy_overall' created (Message.py|99)
(1361) [7] [Nov 03 23:54:22] ProgressSubject 'copy_overall' created (Message.py|227)
(1362) [7] [Nov 03 23:54:22] MessageSubject 'copy_current' created (Message.py|99)
(1363) [7] [Nov 03 23:54:22] ProgressSubject 'copy_current' created (Message.py|227)
(1364) [6] [Nov 03 23:54:22] Copying from 'debian8/installfiles64/initrd.gz' to '/mnt/hd/tmp' (Repository.py|522)
(1365) [7] [Nov 03 23:54:22] Length of binary data to download: 34424416 bytes (Repository.py|742)
(1366) [7] [Nov 03 23:54:22] Transfer in from <open file u'/mnt/opsi/debian8/installfiles64/initrd.gz', mode 'rb' at 0x7f2e30910300> to <open file u'/mnt/hd/tmp/initrd.gz', mode 'wb' at 0x7f2e30910270>, dynamic bandwidth False, max bandwidth 0 (Repository.py|366)
(1367) [7] [Nov 03 23:54:22] Filesize is: 34424416 (Repository.py|377)
(1368) [6] [Nov 03 23:54:22] Transfered 33617.59 kByte in 0.01 minutes, average speed was 53823.71 kByte/s (Repository.py|418)
(1369) [6] [Nov 03 23:54:22] Copy done (Repository.py|608)
(1370) [5] [Nov 03 23:54:22] Uncompressing initrd.... (debian8.py|314)
(1371) [6] [Nov 03 23:54:22] Executing: ls -l /mnt/hd/tmp/initrd* (Posix.py|764)
(1372) [6] [Nov 03 23:54:22] Using encoding 'ANSI_X3.4-1968' (Posix.py|797)
(1373) [7] [Nov 03 23:54:22] >>> -rw-r--r-- 1 root root 34424416 Nov 3 23:54 /mnt/hd/tmp/initrd.gz (Posix.py|841)
(1374) [7] [Nov 03 23:54:22] Exit code: 0 (Posix.py|848)
(1375) [6] [Nov 03 23:54:22] Executing: gunzip /mnt/hd/tmp/initrd.gz (Posix.py|764)
(1376) [6] [Nov 03 23:54:22] Using encoding 'ANSI_X3.4-1968' (Posix.py|797)
(1377) [7] [Nov 03 23:54:23] Exit code: 0 (Posix.py|848)
(1378) [6] [Nov 03 23:54:23] Executing: ls -l /mnt/hd/tmp/initrd* (Posix.py|764)
(1379) [6] [Nov 03 23:54:23] Using encoding 'ANSI_X3.4-1968' (Posix.py|797)
(1380) [7] [Nov 03 23:54:23] >>> -rw-r--r-- 1 root root 97040384 Nov 3 23:54 /mnt/hd/tmp/initrd (Posix.py|841)
(1381) [7] [Nov 03 23:54:23] Exit code: 0 (Posix.py|848)
(1382) [5] [Nov 03 23:54:23] Mounting initrd .... (debian8.py|326)
(1383) [6] [Nov 03 23:54:23] Executing: mkdir -p /mnt/hd/tmp/mnt (Posix.py|764)
(1384) [6] [Nov 03 23:54:23] Using encoding 'ANSI_X3.4-1968' (Posix.py|797)
(1385) [7] [Nov 03 23:54:23] Exit code: 0 (Posix.py|848)
(1386) [6] [Nov 03 23:54:23] Executing: cd /mnt/hd/tmp/mnt ; cpio -idm -H newc --no-absolute-filenames < ../initrd (Posix.py|764)
(1387) [6] [Nov 03 23:54:23] Using encoding 'ANSI_X3.4-1968' (Posix.py|797)
(1388) [7] [Nov 03 23:54:24] >>> 189532 blocks (Posix.py|841)
(1389) [7] [Nov 03 23:54:24] Exit code: 0 (Posix.py|848)
(1390) [5] [Nov 03 23:54:24] Copy profile for patch.... (debian8.py|330)
(1391) [7] [Nov 03 23:54:24] MessageSubject 'copy_overall' created (Message.py|99)
(1392) [7] [Nov 03 23:54:24] ProgressSubject 'copy_overall' created (Message.py|227)
(1393) [7] [Nov 03 23:54:24] MessageSubject 'copy_current' created (Message.py|99)
(1394) [7] [Nov 03 23:54:24] ProgressSubject 'copy_current' created (Message.py|227)
(1395) [6] [Nov 03 23:54:24] Copying from 'debian8/debian8.cfg' to '/mnt/hd/tmp/installation_profile' (Repository.py|522)
(1396) [7] [Nov 03 23:54:24] Length of binary data to download: 21779 bytes (Repository.py|742)
(1397) [7] [Nov 03 23:54:24] Transfer in from <open file u'/mnt/opsi/debian8/debian8.cfg', mode 'rb' at 0x7f2e30910300> to <open file u'/mnt/hd/tmp/installation_profile', mode 'wb' at 0x7f2e30910390>, dynamic bandwidth False, max bandwidth 0 (Repository.py|366)
(1398) [7] [Nov 03 23:54:24] Filesize is: 21779 (Repository.py|377)
(1399) [6] [Nov 03 23:54:24] Transfered 21.27 kByte in 0.00 minutes, average speed was 10918.82 kByte/s (Repository.py|418)
(1400) [6] [Nov 03 23:54:24] Copy done (Repository.py|608)
(1401) [5] [Nov 03 23:54:24] Copy /etc/default/keyboard for patch.... (debian8.py|336)
(1402) [7] [Nov 03 23:54:24] MessageSubject 'copy_overall' created (Message.py|99)
(1403) [7] [Nov 03 23:54:24] ProgressSubject 'copy_overall' created (Message.py|227)
(1404) [7] [Nov 03 23:54:24] MessageSubject 'copy_current' created (Message.py|99)
(1405) [7] [Nov 03 23:54:24] ProgressSubject 'copy_current' created (Message.py|227)
(1406) [6] [Nov 03 23:54:24] Copying from 'debian8/keyboard' to '/mnt/hd/tmp/keyboard' (Repository.py|522)
(1407) [7] [Nov 03 23:54:24] Length of binary data to download: 651 bytes (Repository.py|742)
(1408) [7] [Nov 03 23:54:24] Transfer in from <open file u'/mnt/opsi/debian8/keyboard', mode 'rb' at 0x7f2e30910390> to <open file u'/mnt/hd/tmp/keyboard', mode 'wb' at 0x7f2e30910300>, dynamic bandwidth False, max bandwidth 0 (Repository.py|366)
(1409) [7] [Nov 03 23:54:24] Filesize is: 651 (Repository.py|377)
(1410) [6] [Nov 03 23:54:24] Transfered 0.64 kByte in 0.00 minutes, average speed was 1066.60 kByte/s (Repository.py|418)
(1411) [6] [Nov 03 23:54:24] Copy done (Repository.py|608)
(1412) [5] [Nov 03 23:54:24] Prepare patch file.... (debian8.py|408)
(1413) [2] [Nov 03 23:54:25] Traceback: (Logger.py|753)
(1414) [2] [Nov 03 23:54:25] File "/usr/local/bin/master.py", line 1461, in <module>
(1415) execfile(actionScript)
(1416) (Logger.py|753)
(1417) [2] [Nov 03 23:54:25] File "/tmp/debian8.py", line 417, in <module>
(1418) sourcesList = requests.get('%s/sources.list' % online_repository)
(1419) (Logger.py|753)
(1420) [2] [Nov 03 23:54:25] File "/usr/lib/python2.7/dist-packages/requests/api.py", line 67, in get
(1421) return request('get', url, params=params, **kwargs)
(1422) (Logger.py|753)
(1423) [2] [Nov 03 23:54:25] File "/usr/lib/python2.7/dist-packages/requests/api.py", line 53, in request
(1424) return session.request(method=method, url=url, **kwargs)
(1425) (Logger.py|753)
(1426) [2] [Nov 03 23:54:25] File "/usr/lib/python2.7/dist-packages/requests/sessions.py", line 468, in request
(1427) resp = self.send(prep, **send_kwargs)
(1428) (Logger.py|753)
(1429) [2] [Nov 03 23:54:25] File "/usr/lib/python2.7/dist-packages/requests/sessions.py", line 576, in send
(1430) r = adapter.send(request, **kwargs)
(1431) (Logger.py|753)
(1432) [2] [Nov 03 23:54:25] File "/usr/lib/python2.7/dist-packages/requests/adapters.py", line 437, in send
(1433) raise ConnectionError(e, request=request)
(1434) (Logger.py|753)
(1435) [2] [Nov 03 23:54:25] ==>>> HTTPConnectionPool(host='ftp.de.debian.org', port=80): Max retries exceeded with url: /debian/sources.list (Caused by NewConnectionError('<requests.packages.urllib3.connection.HTTPConnection object at 0x7f2e3091b690>: Failed to establish a new connection: [Errno 111] Connection refused',)) (master.py|1509)
(1436) [7] [Nov 03 23:54:25] Backend: <JSONRPCBackend(host=u'192.168.1.14', deflate=False)> (master.py|1512)
(1437) [7] [Nov 03 23:54:25] ProductId: debian8 (master.py|1513)

Guten Morgen,

könntest Du uns das komplette Log eines durchlaufenden und fehlerhaften Clients zukommen lassen?
Entweder an info@uib.de mit Verweis auf den Thread oder einfach hier nen Link zu den Log pasten.

Danke
Gruß
Mathias

Hallo Mathias,

hier die logfiles vom setup Lauf:

https://service.muehlboeck.com/index.ph ... VdQeiJ1h3X

beste Grüße,
Roland

Hi Roland
kannst Du noch einen erfolgreichen Lauf mit Ubuntu posten?

Mir scheint es so als ob euer Proxy die Anfrage nicht durchlässt bzw weiterleitet und an der entsprechenden Stelle hängenbleibt.
Es wird 5 mal geschaut ob eine Datei auf dem repository liegt. Wenn Sie nicht da ist wird es abgefangen aber in Deinem Fall scheint der Proxy die Anfrage zu blockieren.
Der COde ist in der Ubuntu14-04 und 16-04 Version gleich, daher ist es komisch das es da funktioniert.

Ich habe auch einen Test mit unserem internen proxcy gemacht und der ging durch.

Gruß
Mathias

Hallo,

hab das Setup jetzt ohne Firewall davor gestartet - dann läufts auch durch. Dann nochmal mit Proxy, wieder der gleiche Fehler aber kein Eintrag im Proxy logfile.

Aufgrund fehlender Netzwerktreiber im stock Kernel ist debian8 mittlerweil für unser Projekt aus dem Rennen.

Gibt es schon beta Packages für debian9/stretch ?

beste Grüße

Hi xaok

für debian9 gibt es noch kein Paket.
Ich denke das erste wird erst kommen wenn der Freeze einsetzt, somit können wir dann auch intern schonmal opsi auf dem System testen

der hard freeze ist für Februar 2017 angekündigt

Gruß
Mathias