hallo herr oertel
leider hat's etwas gedauert bis ich mich der fragestellung annehmen konnte ( support-vertrag habe ich nicht ).
zunaechst danke fuer den tip, der mich erst in die richtige richtung gefuehrt hat !!
bin zu folgender loesung gekommen, die ich gerade intensiv teste.
1.
beide interfaces des servers sind als "clientconfig.configserver.url" definiert:
Code: Alles auswählen
opsi-admin -d method getGeneralConfigValue "clientconfig.configserver.url" "opsi-server.test.local"
"https://192.168.97.234:4447/rpc,https://192.168.98.234:4447/rpc"
2.
"<packagedir>/CLIENT_DATA/utils/patch_config_file.py" ist so angepasst, das beide urls in bei installation des paketes auf dem server
in "<packagedir>/CLIENT_DATA/files/opsi/cfg/config.ini" eingetragen werden.
siehe folgender output von "diff -u patch_config_file.py.org patch_config_file.py.new"
Code: Alles auswählen
--- patch_config_file.py.org 2014-10-15 14:55:52.614172321 +0200
+++ patch_config_file.py.new 2014-10-15 14:55:52.614172321 +0200
@@ -52,9 +52,30 @@
configs = b.config_getObjects(id = 'clientconfig.configserver.url')
if configs:
- configurl = configs[0].defaultValues[0]
- if configurl.endswith("/rpc"):
- configurl = configurl[:-4]
+
+#####################################
+# <boris.synak@zobelsoft.de>
+#####################################
+
+ configurl = ""
+ for url in configs[0].defaultValues:
+ if url.endswith("/rpc"):
+ url = url[:-4]
+ configurl += url
+ configurl += ", "
+ print configurl
+
+ configurl = configurl[:-2]
+ print configurl
+
+# configurl = configs[0].defaultValues[0]
+# if configurl.endswith("/rpc"):
+# configurl = configurl[:-4]
+
+#####################################
+# </boris.synak@zobelsoft.de>
+#####################################
+
else:
configurl = "https://" + configServerIp + ":4447"
3.
"<packagedir>/CLIENT_DATA/files/opsi/setup.ins" ist so angepasst, das fuer die gegebenen urls getestet wird ob die fragliche ip
via ping vom client aus erreicht werden kann. falls ja wird diese url fuer den fraglichen client verwendet und als "clientconfig.configserver.url" des clients
beim server eingetragen.
siehe folgender output von "diff -u setup.ins.org setup.ins.new"
Code: Alles auswählen
--- setup.ins.org 2014-10-15 15:10:43.330157493 +0200
+++ setup.ins.new 2014-10-15 15:10:43.330157493 +0200
@@ -12,6 +12,20 @@
; INST = used while installation
; Script variables with prefix INST
+;*************************************
+; <boris.synak@zobelsoft.de>
+;*************************************
+
+DefVar $OCD_WORKING_config_service.url$
+DefStringList $OCD_POSSIBLE_config_service.urls$
+DefVar $OCD_TEST_URL_IP$
+DefVar $OCD_PING_RESULT$
+
+;*************************************
+; </boris.synak@zobelsoft.de>
+;*************************************
+
+
;******** installation vars **********
DefVar $INST_AktGina$
DefVar $INST_AllowReboot$
@@ -556,6 +570,28 @@
Set $OLB_LoginBlockerStart$ = GetValueFromInifile($INST_custom_Cfgini$, "opsiLoginBlocker", "LoginBlockerStart", $OLB_LoginBlockerStart$)
Set $OLB_LoginBlockerTimeoutConnect$ = GetValueFromInifile($INST_custom_Cfgini$, "opsiLoginBlocker", "LoginBlockerTimeoutConnect", $OLB_LoginBlockerTimeoutConnect$)
+
+;*************************************
+; <boris.synak@zobelsoft.de>
+;*************************************
+if contains( $OCD_config_service.url$, "," )
+
+ Set $OCD_POSSIBLE_config_service.urls$ = splitString( $OCD_config_service.url$, "," )
+
+ for %possible_config_service_url% in $OCD_POSSIBLE_config_service.urls$ do sub_test_config_service_url
+
+ Set $OCD_config_service.url$ = $OCD_WORKING_config_service.url$
+
+endif
+;*************************************
+; <boris.synak@zobelsoft.de>
+;*************************************
+
+
+
+
+
+
; change value given by config.ini only if property present
if GetProductProperty ("LoginBlockerStart","") = "on"
Set $OLB_LoginBlockerStart$ = "1"
@@ -661,6 +697,12 @@
if errorsOccuredSinceMark > 0
comment "was not authenticated -> retry scripted login by client ID and hostkey"
comment "Try to open new network connection"
+
+
+
+
+
+
markErrorNumber
SetLogLevel=$INST_PasswdLogLevel$
opsiservicecall_authenticated /username $INST_ClientId$ /password $SHI_pckey$ /serviceurl $OCD_config_service.url$
@@ -941,6 +983,23 @@
; *** Get active service url ***
Set $INST_ServiceResult$ = getReturnListFromSection('opsiservicecall_getNetworkconfig_hash')
set $OCD_config_service.url$ = takestring(1, splitString(takeFirstStringContaining($INST_ServiceResult$,"nextBootServiceURL"), '='))
+
+;*************************************
+; <boris.synak@zobelsoft.de>
+;*************************************
+if contains( $OCD_config_service.url$, "," )
+
+ Set $OCD_POSSIBLE_config_service.urls$ = splitString( $OCD_config_service.url$, "," )
+
+ for %possible_config_service_url% in $OCD_POSSIBLE_config_service.urls$ do sub_test_config_service_url
+
+ Set $OCD_config_service.url$ = $OCD_WORKING_config_service.url$
+
+endif
+;*************************************
+; <boris.synak@zobelsoft.de>
+;*************************************
+
if $OCD_config_service.url$ = ""
comment "Getting values from from config file"
Set $OCD_config_service.url$ = GetvalueFromInifile($INST_cfgini$, "opsiclientd", "config_service.url", "")
@@ -948,6 +1007,22 @@
Set $OCD_config_service.url$ = GetvalueFromInifile($INST_custom_Cfgini$, "opsiclientd", "config_service.url", $OCD_config_service.url$)
endif
+;*************************************
+; <boris.synak@zobelsoft.de>
+;*************************************
+if contains( $OCD_config_service.url$, "," )
+
+ Set $OCD_POSSIBLE_config_service.urls$ = splitString( $OCD_config_service.url$, "," )
+
+ for %possible_config_service_url% in $OCD_POSSIBLE_config_service.urls$ do sub_test_config_service_url
+
+ Set $OCD_config_service.url$ = $OCD_WORKING_config_service.url$
+
+endif
+;*************************************
+; <boris.synak@zobelsoft.de>
+;*************************************
+
; uncommented for experimental 4.0.4.2-1 :
;; *** Get hostkey1 ***
; SetLogLevel=$INST_PasswdLogLevel$
@@ -1129,7 +1204,21 @@
comment "lock c:\opsi.org -> for administrators only"
DosInAnIcon_lock_c_opsiorg
+
+;*************************************
+; <boris.synak@zobelsoft.de>
+;*************************************
+opsiservicecall_setGeneralConfigValue_clientconfig_configserver_url
+Set $OCD_config_service.url$ = stringReplace( $OCD_config_service.url$, "/rpc", "" )
+comment "$OCD_config_service.url$ = " + $OCD_config_service.url$
+;*************************************
+; </boris.synak@zobelsoft.de>
+;*************************************
+
+
+
Patches_opsiclientd_conf_rest $INST_OpsiclientdConf$
+
if not (($SHI_pckey$ = "") or ($SHI_pckey$ = "#@PCKEY#"))
comment "dont log the pckey"
SetLogLevel=$INST_PasswdLogLevel$
@@ -2400,3 +2489,44 @@
;**************************************************
;**************************************************
+
+
+
+
+
+
+
+
+;*************************************
+; <boris.synak@zobelsoft.de>
+;*************************************
+
+
+[opsiservicecall_setGeneralConfigValue_clientconfig_configserver_url]
+"method": "setGeneralConfigValue"
+"params": [
+ "clientconfig.configserver.url",
+ "$OCD_config_service.url$"
+ "$INST_ClientId$"
+ ]
+
+
+[sub_test_config_service_url]
+comment "testing " + trim("%possible_config_service_url%")
+Set $OCD_TEST_URL_IP$ = stringReplace( trim( takeString(1, splitString( trim("%possible_config_service_url%"), ":") ) ), "/", "" )
+comment "IP to check:" + $OCD_TEST_URL_IP$
+dosinanicon_ping_test_url
+set $OCD_PING_RESULT$ = getLastExitCode
+if $OCD_PING_RESULT$ = "0"
+ Set $OCD_WORKING_config_service.url$ = trim("%possible_config_service_url%")
+endif
+
+
+[dosinanicon_ping_test_url]
+ping -4 -n 3 $OCD_TEST_URL_IP$
+
+
+
+;*************************************
+; </boris.synak@zobelsoft.de>
+;*************************************
rueckmeldung / kritik herzlich willkommen
boris
