forum.opsi.org

Hallo Zusammen,

versuche eine Betriebssysteminstallation von Windows 7 zu machen.

Während der Vorbereitung der Installation wird folgender Fehler weggeschrieben:
Failed to get boot configuration from tftp server: argument for 's' must be a string (master.py|908)

Hat jemand eine Idee wie der Fehler zustande kommt?

Hier der Logauszug:
---------------------------
Apr 23 17:20:14 [opsiinit] opsi init script started
Apr 23 17:20:14 [opsiinit] opsi linux bootimage version: 20140118
Apr 23 17:20:14 [opsiinit] getBootParam(pwh): cmdline: *** confidential *** initrd=miniroot.bz2 video=vesa:ywrap,mtrr vga=791 quiet splash service BOOT_IMAGE=vmlinuz
Apr 23 17:20:14 [opsiinit] boot param pwh=
Apr 23 17:20:14 [opsiinit] getBootParam(nodhcp): cmdline: *** confidential *** initrd=miniroot.bz2 video=vesa:ywrap,mtrr vga=791 quiet splash service BOOT_IMAGE=vmlinuz
Apr 23 17:20:14 [opsiinit] boot param nodhcp=0
Apr 23 17:20:14 [opsiinit] getBootParam(hn): cmdline: *** confidential *** initrd=miniroot.bz2 video=vesa:ywrap,mtrr vga=791 quiet splash service BOOT_IMAGE=vmlinuz
Apr 23 17:20:14 [opsiinit] boot param hn=
Apr 23 17:20:14 [opsiinit] getBootParam(lang): cmdline: *** confidential *** initrd=miniroot.bz2 video=vesa:ywrap,mtrr vga=791 quiet splash service BOOT_IMAGE=vmlinuz
Apr 23 17:20:14 [opsiinit] boot param *** confidential ***
Apr 23 17:20:14 [opsiinit] loading keymap de-latin1-nodeadkeys
Apr 23 17:20:14 [opsiinit] setting language environment (LANG=de_DE.UTF8, LANGUAGE=de, LC_ALL=de_DE.UTF8)
Apr 23 17:20:14 [opsiinit] getNetworkDevices(): link forced
Apr 23 17:20:14 [opsiinit] getNetworkDevices(): device(s) found: eth0, device(s) with link:
Apr 23 17:20:14 [opsiinit] getNetworkDevices(): no devices with link found, returning error
Apr 23 17:20:14 [opsiinit] no devices found, sleeping 3 seconds
Apr 23 17:20:17 [opsiinit] getNetworkDevices(): link forced
Apr 23 17:20:17 [opsiinit] getNetworkDevices(): device(s) found: eth0, device(s) with link:
Apr 23 17:20:17 [opsiinit] getNetworkDevices(): no devices with link found, returning error
Apr 23 17:20:17 [opsiinit] no devices found, sleeping 3 seconds
Apr 23 17:20:20 [opsiinit] getNetworkDevices(): link forced
Apr 23 17:20:20 [opsiinit] getNetworkDevices(): device(s) found: eth0, device(s) with link:
Apr 23 17:20:20 [opsiinit] getNetworkDevices(): no devices with link found, returning error
Apr 23 17:20:20 [opsiinit] no devices found, sleeping 3 seconds
Apr 23 17:20:23 [opsiinit] getNetworkDevices(): link forced
Apr 23 17:20:23 [opsiinit] getNetworkDevices(): device(s) found: eth0, device(s) with link:
Apr 23 17:20:23 [opsiinit] getNetworkDevices(): no devices with link found, returning error
Apr 23 17:20:23 [opsiinit] no devices found, sleeping 3 seconds
Apr 23 17:20:26 [opsiinit] getNetworkDevices(): link forced
Apr 23 17:20:26 [opsiinit] getNetworkDevices(): device(s) found: eth0, device(s) with link:
Apr 23 17:20:26 [opsiinit] getNetworkDevices(): no devices with link found, returning error
Apr 23 17:20:26 [opsiinit] no devices found, sleeping 3 seconds
Apr 23 17:20:29 [opsiinit] getNetworkDevices(): link forced
Apr 23 17:20:29 [opsiinit] getNetworkDevices(): device(s) found: eth0, device(s) with link:
Apr 23 17:20:29 [opsiinit] getNetworkDevices(): no devices with link found, returning error
Apr 23 17:20:29 [opsiinit] no devices found, sleeping 3 seconds
Apr 23 17:20:32 [opsiinit] getNetworkDevices(): link forced
Apr 23 17:20:32 [opsiinit] getNetworkDevices(): device(s) found: eth0, device(s) with link:
Apr 23 17:20:32 [opsiinit] getNetworkDevices(): no devices with link found, returning error
Apr 23 17:20:32 [opsiinit] no devices found, sleeping 3 seconds
Apr 23 17:20:35 [opsiinit] getNetworkDevices(): link forced
Apr 23 17:20:35 [opsiinit] getNetworkDevices(): device(s) found: eth0, device(s) with link:
Apr 23 17:20:35 [opsiinit] getNetworkDevices(): no devices with link found, returning error
Apr 23 17:20:35 [opsiinit] no devices found, sleeping 3 seconds
Apr 23 17:20:38 [opsiinit] getNetworkDevices(): link forced
Apr 23 17:20:38 [opsiinit] getNetworkDevices(): device(s) found: eth0, device(s) with link:
Apr 23 17:20:38 [opsiinit] getNetworkDevices(): no devices with link found, returning error
Apr 23 17:20:38 [opsiinit] no devices found, sleeping 3 seconds
Apr 23 17:20:41 [opsiinit] getNetworkDevices(): link forced
Apr 23 17:20:41 [opsiinit] getNetworkDevices(): device(s) found: eth0, device(s) with link:
Apr 23 17:20:41 [opsiinit] getNetworkDevices(): no devices with link found, returning error
Apr 23 17:20:41 [opsiinit] no devices found, sleeping 3 seconds
Apr 23 17:20:44 [opsiinit] getNetworkDevices(): device(s) found: eth0, device(s) with link:
Apr 23 17:20:44 [opsiinit] getNetworkDevices(): no devices with link found, returning eth0
Apr 23 17:20:44 [opsiinit] using dhcp, adding entry for device eth0 to /etc/network/interfaces
Apr 23 17:20:54 [opsiinit] opsi init script ended
[7] [Apr 23 17:20:57] Reading /proc/cmdline (Posix.py|345)
[6] [Apr 23 17:20:57] Kernel commandline: {u'lang': u'de', u'boot_image': u'vmlinuz', u'service': u'', u'vga': u'791', u'quiet': u'', u'initrd': u'miniroot.bz2', u'splash': u'', u'video': u'vesa:ywrap,mtrr'} (master.py|607)
[6] [Apr 23 17:20:57] Executing: echo 0 > /proc/sys/kernel/printk (Posix.py|690)
[6] [Apr 23 17:20:57] Using encoding 'UTF-8' (Posix.py|721)
[7] [Apr 23 17:20:57] Exit code: 0 (Posix.py|778)
[6] [Apr 23 17:20:57] Executing: setterm -msg off -blank 0 -powersave off < /dev/tty6 > /dev/tty6 (Posix.py|690)
[6] [Apr 23 17:20:57] Using encoding 'UTF-8' (Posix.py|721)
[7] [Apr 23 17:20:57] Exit code: 0 (Posix.py|778)
[6] [Apr 23 17:20:57] Executing: dmesg (Posix.py|690)
[6] [Apr 23 17:20:57] Using encoding 'UTF-8' (Posix.py|721)
[7] [Apr 23 17:20:57] >>> ACPI: bus type PNP registered (Posix.py|771)
[7] [Apr 23 17:20:57] >>> pnp 00:00: disabling [io 0x0800-0x085f] because it overlaps 0000:00:1f.0 BAR 7 [io 0x0800-0x087f] (Posix.py|771)
[7] [Apr 23 17:20:57] >>> pnp 00:00: disabling [io 0x0860-0x08ff] because it overlaps 0000:00:1f.0 BAR 7 [io 0x0800-0x087f] (Posix.py|771)
[7] [Apr 23 17:20:57] >>> system 00:00: [io 0x0c00-0x0c7f] has been reserved (Posix.py|771)
[7] [Apr 23 17:20:57] >>> system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) (Posix.py|771)
[7] [Apr 23 17:20:57] >>> pnp 00:01: [dma 4] (Posix.py|771)
[7] [Apr 23 17:20:57] >>> pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) (Posix.py|771)
[7] [Apr 23 17:20:57] >>> pnp 00:02: Plug and Play ACPI device, IDs PNP0c04 (active) (Posix.py|771)
[7] [Apr 23 17:20:57] >>> pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active) (Posix.py|771)
[7] [Apr 23 17:20:57] >>> pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) (Posix.py|771)
[7] [Apr 23 17:20:57] >>> pnp 00:05: [dma 0 disabled] (Posix.py|771)
[7] [Apr 23 17:20:57] >>> pnp 00:05: Plug and Play ACPI device, IDs PNP0401 (active) (Posix.py|771)
[7] [Apr 23 17:20:57] >>> pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active) (Posix.py|771)
[7] [Apr 23 17:20:57] >>> system 00:07: [mem 0x00000000-0x0009ffff] could not be reserved (Posix.py|771)
[7] [Apr 23 17:20:57] >>> system 00:07: [mem 0x00100000-0x00ffffff] could not be reserved (Posix.py|771)
[7] [Apr 23 17:20:57] >>> system 00:07: [mem 0x01000000-0x7f686bff] could not be reserved (Posix.py|771)
[7] [Apr 23 17:20:57] >>> system 00:07: [mem 0x000f0000-0x000fffff] could not be reserved (Posix.py|771)
[7] [Apr 23 17:20:57] >>> system 00:07: [mem 0x000c0000-0x000cffff] could not be reserved (Posix.py|771)
[7] [Apr 23 17:20:57] >>> system 00:07: [mem 0xfec00000-0xfecfffff] could not be reserved (Posix.py|771)
[7] [Apr 23 17:20:57] >>> system 00:07: [mem 0xfee00000-0xfeefffff] has been reserved (Posix.py|771)
[7] [Apr 23 17:20:57] >>> system 00:07: [mem 0xfed20000-0xfed9ffff] has been reserved (Posix.py|771)
[7] [Apr 23 17:20:57] >>> system 00:07: [mem 0xffb00000-0xffbfffff] has been reserved (Posix.py|771)
[7] [Apr 23 17:20:57] >>> system 00:07: [mem 0xffc00000-0xffffffff] has been reserved (Posix.py|771)
[7] [Apr 23 17:20:57] >>> system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active) (Posix.py|771)
[7] [Apr 23 17:20:57] >>> system 00:08: [io 0x0100-0x01fe] could not be reserved (Posix.py|771)
[7] [Apr 23 17:20:57] >>> system 00:08: [io 0x0200-0x0277] has been reserved (Posix.py|771)
[7] [Apr 23 17:20:57] >>> system 00:08: [io 0x0280-0x02e7] has been reserved (Posix.py|771)
[7] [Apr 23 17:20:57] >>> system 00:08: [io 0x02f0-0x02f7] has been reserved (Posix.py|771)
[7] [Apr 23 17:20:57] >>> system 00:08: [io 0x0300-0x0377] could not be reserved (Posix.py|771)
[7] [Apr 23 17:20:57] >>> system 00:08: [io 0x0380-0x03bb] has been reserved (Posix.py|771)
[7] [Apr 23 17:20:57] >>> system 00:08: [io 0x03c0-0x03e7] has been reserved (Posix.py|771)
[7] [Apr 23 17:20:57] >>> system 00:08: [io 0x03f6-0x03f7] could not be reserved (Posix.py|771)
[7] [Apr 23 17:20:57] >>> system 00:08: [io 0x0400-0x04cf] has been reserved (Posix.py|771)
[7] [Apr 23 17:20:57] >>> system 00:08: [io 0x04d2-0x057f] has been reserved (Posix.py|771)
[7] [Apr 23 17:20:57] >>> system 00:08: [io 0x0580-0x0677] has been reserved (Posix.py|771)
[7] [Apr 23 17:20:57] >>> system 00:08: [io 0x0680-0x0777] has been reserved (Posix.py|771)
[7] [Apr 23 17:20:57] >>> system 00:08: [io 0x0780-0x07bb] has been reserved (Posix.py|771)
[7] [Apr 23 17:20:57] >>> system 00:08: [io 0x07c0-0x07ff] has been reserved (Posix.py|771)
[7] [Apr 23 17:20:57] >>> system 00:08: [io 0x08e0-0x08ff] has been reserved (Posix.py|771)
[7] [Apr 23 17:20:57] >>> system 00:08: [io 0x0900-0x09fe] has been reserved (Posix.py|771)
[7] [Apr 23 17:20:57] >>> system 00:08: [io 0x0a00-0x0afe] has been reserved (Posix.py|771)
[7] [Apr 23 17:20:57] >>> system 00:08: [io 0x0b00-0x0bfe] has been reserved (Posix.py|771)
[7] [Apr 23 17:20:57] >>> system 00:08: [io 0x0c80-0x0caf] has been reserved (Posix.py|771)
[7] [Apr 23 17:20:57] >>> system 00:08: [io 0x0cb0-0x0cbf] has been reserved (Posix.py|771)
[7] [Apr 23 17:20:57] >>> system 00:08: [io 0x0cc0-0x0cf7] has been reserved (Posix.py|771)
[7] [Apr 23 17:20:57] >>> system 00:08: [io 0x0d00-0x0dfe] has been reserved (Posix.py|771)
[7] [Apr 23 17:20:57] >>> system 00:08: [io 0x0e00-0x0efe] has been reserved (Posix.py|771)
[7] [Apr 23 17:20:57] >>> system 00:08: [io 0x0f00-0x0ffe] has been reserved (Posix.py|771)
[7] [Apr 23 17:20:57] >>> system 00:08: [io 0x2000-0x20fe] has been reserved (Posix.py|771)
[7] [Apr 23 17:20:57] >>> system 00:08: [io 0x2100-0x21fe] has been reserved (Posix.py|771)
[7] [Apr 23 17:20:57] >>> system 00:08: [io 0x2200-0x22fe] has been reserved (Posix.py|771)
[7] [Apr 23 17:20:57] >>> system 00:08: [io 0x2300-0x23fe] has been reserved (Posix.py|771)
[7] [Apr 23 17:20:57] >>> system 00:08: [io 0x2400-0x24fe] has been reserved (Posix.py|771)
[7] [Apr 23 17:20:57] >>> system 00:08: [io 0x2500-0x25fe] has been reserved (Posix.py|771)
[7] [Apr 23 17:20:57] >>> system 00:08: [io 0x2600-0x26fe] has been reserved (Posix.py|771)
[7] [Apr 23 17:20:57] >>> system 00:08: [io 0x2700-0x27fe] has been reserved (Posix.py|771)
[7] [Apr 23 17:20:57] >>> system 00:08: [io 0x2800-0x28fe] has been reserved (Posix.py|771)
[7] [Apr 23 17:20:57] >>> system 00:08: [io 0x2900-0x29fe] has been reserved (Posix.py|771)
[7] [Apr 23 17:20:57] >>> system 00:08: [io 0x2a00-0x2afe] has been reserved (Posix.py|771)
[7] [Apr 23 17:20:57] >>> system 00:08: [io 0x2b00-0x2bfe] has been reserved (Posix.py|771)
[7] [Apr 23 17:20:57] >>> system 00:08: [io 0x2c00-0x2cfe] has been reserved (Posix.py|771)
[7] [Apr 23 17:20:57] >>> system 00:08: [io 0x2d00-0x2dfe] has been reserved (Posix.py|771)
[7] [Apr 23 17:20:57] >>> system 00:08: [io 0x2e00-0x2efe] has been reserved (Posix.py|771)
[7] [Apr 23 17:20:57] >>> system 00:08: [io 0x2f00-0x2ffe] has been reserved (Posix.py|771)
[7] [Apr 23 17:20:57] >>> system 00:08: [io 0x5000-0x50fe] has been reserved (Posix.py|771)
[7] [Apr 23 17:20:57] >>> system 00:08: [io 0x5100-0x51fe] has been reserved (Posix.py|771)
[7] [Apr 23 17:20:57] >>> system 00:08: [io 0x5200-0x52fe] has been reserved (Posix.py|771)
[7] [Apr 23 17:20:57] >>> system 00:08: [io 0x5300-0x53fe] has been reserved (Posix.py|771)
[7] [Apr 23 17:20:57] >>> system 00:08: [io 0x5400-0x54fe] has been reserved (Posix.py|771)
[7] [Apr 23 17:20:57] >>> system 00:08: [io 0x5500-0x55fe] has been reserved (Posix.py|771)
[7] [Apr 23 17:20:57] >>> system 00:08: [io 0x5600-0x56fe] has been reserved (Posix.py|771)
[7] [Apr 23 17:20:57] >>> system 00:08: [io 0x5700-0x57fe] has been reserved (Posix.py|771)
[7] [Apr 23 17:20:57] >>> system 00:08: [io 0x5800-0x58fe] has been reserved (Posix.py|771)
[7] [Apr 23 17:20:57] >>> system 00:08: [io 0x5900-0x59fe] has been reserved (Posix.py|771)
[7] [Apr 23 17:20:57] >>> system 00:08: [io 0x5a00-0x5afe] has been reserved (Posix.py|771)
[7] [Apr 23 17:20:57] >>> system 00:08: [io 0x5b00-0x5bfe] has been reserved (Posix.py|771)
[7] [Apr 23 17:20:57] >>> system 00:08: [io 0x5c00-0x5cfe] has been reserved (Posix.py|771)
[7] [Apr 23 17:20:57] >>> system 00:08: [io 0x5d00-0x5dfe] has been reserved (Posix.py|771)
[7] [Apr 23 17:20:57] >>> system 00:08: [io 0x5e00-0x5efe] has been reserved (Posix.py|771)
[7] [Apr 23 17:20:57] >>> system 00:08: [io 0x5f00-0x5ffe] has been reserved (Posix.py|771)
[7] [Apr 23 17:20:57] >>> system 00:08: [io 0x6000-0x60fe] has been reserved (Posix.py|771)
[7] [Apr 23 17:20:57] >>> system 00:08: [io 0x6100-0x61fe] has been reserved (Posix.py|771)
[7] [Apr 23 17:20:57] >>> system 00:08: [io 0x6200-0x62fe] has been reserved (Posix.py|771)
[7] [Apr 23 17:20:57] >>> system 00:08: [io 0x6300-0x63fe] has been reserved (Posix.py|771)
[7] [Apr 23 17:20:57] >>> system 00:08: [io 0x6400-0x64fe] has been reserved (Posix.py|771)
[7] [Apr 23 17:20:57] >>> system 00:08: [io 0x6500-0x65fe] has been reserved (Posix.py|771)
[7] [Apr 23 17:20:57] >>> system 00:08: [io 0x6600-0x66fe] has been reserved (Posix.py|771)
[7] [Apr 23 17:20:57] >>> system 00:08: [io 0x6700-0x67fe] has been reserved (Posix.py|771)
[7] [Apr 23 17:20:57] >>> system 00:08: [io 0x6800-0x68fe] has been reserved (Posix.py|771)
[7] [Apr 23 17:20:57] >>> system 00:08: [io 0x6900-0x69fe] has been reserved (Posix.py|771)
[7] [Apr 23 17:20:57] >>> system 00:08: [io 0x6a00-0x6afe] has been reserved (Posix.py|771)
[7] [Apr 23 17:20:57] >>> system 00:08: [io 0x6b00-0x6bfe] has been reserved (Posix.py|771)
[7] [Apr 23 17:20:57] >>> system 00:08: [io 0x6c00-0x6cfe] has been reserved (Posix.py|771)
[7] [Apr 23 17:20:57] >>> system 00:08: [io 0x6d00-0x6dfe] has been reserved (Posix.py|771)
[7] [Apr 23 17:20:57] >>> system 00:08: [io 0x6e00-0x6efe] has been reserved (Posix.py|771)
[7] [Apr 23 17:20:57] >>> system 00:08: [io 0x6f00-0x6ffe] has been reserved (Posix.py|771)
[7] [Apr 23 17:20:57] >>> system 00:08: [io 0xa000-0xa0fe] has been reserved (Posix.py|771)
[7] [Apr 23 17:20:57] >>> system 00:08: [io 0xa100-0xa1fe] has been reserved (Posix.py|771)
[7] [Apr 23 17:20:57] >>> system 00:08: [io 0xa200-0xa2fe] has been reserved (Posix.py|771)
[7] [Apr 23 17:20:57] >>> system 00:08: [io 0xa300-0xa3fe] has been reserved (Posix.py|771)
[7] [Apr 23 17:20:57] >>> system 00:08: [io 0xa400-0xa4fe] has been reserved (Posix.py|771)
[7] [Apr 23 17:20:57] >>> system 00:08: [io 0xa500-0xa5fe] has been reserved (Posix.py|771)
[7] [Apr 23 17:20:57] >>> system 00:08: [io 0xa600-0xa6fe] has been reserved (Posix.py|771)
[7] [Apr 23 17:20:57] >>> system 00:08: [io 0xa700-0xa7fe] has been reserved (Posix.py|771)
[7] [Apr 23 17:20:57] >>> system 00:08: [io 0xa800-0xa8fe] has been reserved (Posix.py|771)
[7] [Apr 23 17:20:57] >>> system 00:08: [io 0xa900-0xa9fe] has been reserved (Posix.py|771)
[7] [Apr 23 17:20:57] >>> system 00:08: [io 0xaa00-0xaafe] has been reserved (Posix.py|771)
[7] [Apr 23 17:20:57] >>> system 00:08: [io 0xab00-0xabfe] has been reserved (Posix.py|771)
[7] [Apr 23 17:20:57] >>> system 00:08: [io 0xac00-0xacfe] has been reserved (Posix.py|771)
[7] [Apr 23 17:20:57] >>> system 00:08: [io 0xad00-0xadfe] has been reserved (Posix.py|771)
[7] [Apr 23 17:20:57] >>> system 00:08: [io 0xae00-0xaefe] has been reserved (Posix.py|771)
[7] [Apr 23 17:20:57] >>> system 00:08: [io 0xaf00-0xaffe] has been reserved (Posix.py|771)
[7] [Apr 23 17:20:57] >>> system 00:08: [mem 0xf0000000-0xf3ffffff] has been reserved (Posix.py|771)
[7] [Apr 23 17:20:57] >>> system 00:08: [mem 0xfeda0000-0xfedacfff] has been reserved (Posix.py|771)
[7] [Apr 23 17:20:57] >>> system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) (Posix.py|771)
[7] [Apr 23 17:20:57] >>> pnp: PnP ACPI: found 9 devices (Posix.py|771)
[7] [Apr 23 17:20:57] >>> ACPI: bus type PNP unregistered (Posix.py|771)
[7] [Apr 23 17:20:57] >>> Switching to clocksource acpi_pm (Posix.py|771)
[7] [Apr 23 17:20:57] >>> pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> pci 0000:00:1c.0: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> pci 0000:00:1c.1: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> pci 0000:00:1c.0: res[7]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> pci 0000:00:1c.1: res[7]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> pci 0000:00:1c.0: BAR 9: assigned [mem 0x80000000-0x801fffff 64bit pref] (Posix.py|771)
[7] [Apr 23 17:20:57] >>> pci 0000:00:1c.1: BAR 9: assigned [mem 0x80200000-0x803fffff 64bit pref] (Posix.py|771)
[7] [Apr 23 17:20:57] >>> pci 0000:00:1c.0: BAR 7: assigned [io 0x1000-0x1fff] (Posix.py|771)
[7] [Apr 23 17:20:57] >>> pci 0000:00:1c.1: BAR 7: assigned [io 0x3000-0x3fff] (Posix.py|771)
[7] [Apr 23 17:20:57] >>> pci 0000:00:1c.0: PCI bridge to [bus 01] (Posix.py|771)
[7] [Apr 23 17:20:57] >>> pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] (Posix.py|771)
[7] [Apr 23 17:20:57] >>> pci 0000:00:1c.0: bridge window [mem 0xfe900000-0xfe9fffff] (Posix.py|771)
[7] [Apr 23 17:20:57] >>> pci 0000:00:1c.0: bridge window [mem 0x80000000-0x801fffff 64bit pref] (Posix.py|771)
[7] [Apr 23 17:20:57] >>> pci 0000:00:1c.1: PCI bridge to [bus 02] (Posix.py|771)
[7] [Apr 23 17:20:57] >>> pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff] (Posix.py|771)
[7] [Apr 23 17:20:57] >>> pci 0000:00:1c.1: bridge window [mem 0xfe800000-0xfe8fffff] (Posix.py|771)
[7] [Apr 23 17:20:57] >>> pci 0000:00:1c.1: bridge window [mem 0x80200000-0x803fffff 64bit pref] (Posix.py|771)
[7] [Apr 23 17:20:57] >>> pci 0000:00:1e.0: PCI bridge to [bus 03] (Posix.py|771)
[7] [Apr 23 17:20:57] >>> pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff] (Posix.py|771)
[7] [Apr 23 17:20:57] >>> pci 0000:00:1e.0: bridge window [mem 0xfe700000-0xfe7fffff] (Posix.py|771)
[7] [Apr 23 17:20:57] >>> pci 0000:00:1e.0: setting latency timer to 64 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> pci_bus 0000:00: resource 4 [io 0x0000-0xffff] (Posix.py|771)
[7] [Apr 23 17:20:57] >>> pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff] (Posix.py|771)
[7] [Apr 23 17:20:57] >>> pci_bus 0000:01: resource 0 [io 0x1000-0x1fff] (Posix.py|771)
[7] [Apr 23 17:20:57] >>> pci_bus 0000:01: resource 1 [mem 0xfe900000-0xfe9fffff] (Posix.py|771)
[7] [Apr 23 17:20:57] >>> pci_bus 0000:01: resource 2 [mem 0x80000000-0x801fffff 64bit pref] (Posix.py|771)
[7] [Apr 23 17:20:57] >>> pci_bus 0000:02: resource 0 [io 0x3000-0x3fff] (Posix.py|771)
[7] [Apr 23 17:20:57] >>> pci_bus 0000:02: resource 1 [mem 0xfe800000-0xfe8fffff] (Posix.py|771)
[7] [Apr 23 17:20:57] >>> pci_bus 0000:02: resource 2 [mem 0x80200000-0x803fffff 64bit pref] (Posix.py|771)
[7] [Apr 23 17:20:57] >>> pci_bus 0000:03: resource 0 [io 0xd000-0xdfff] (Posix.py|771)
[7] [Apr 23 17:20:57] >>> pci_bus 0000:03: resource 1 [mem 0xfe700000-0xfe7fffff] (Posix.py|771)
[7] [Apr 23 17:20:57] >>> pci_bus 0000:03: resource 4 [io 0x0000-0xffff] (Posix.py|771)
[7] [Apr 23 17:20:57] >>> pci_bus 0000:03: resource 5 [mem 0x00000000-0xffffffff] (Posix.py|771)
[7] [Apr 23 17:20:57] >>> NET: Registered protocol family 2 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> TCP established hash table entries: 8192 (order: 4, 65536 bytes) (Posix.py|771)
[7] [Apr 23 17:20:57] >>> TCP bind hash table entries: 8192 (order: 4, 65536 bytes) (Posix.py|771)
[7] [Apr 23 17:20:57] >>> TCP: Hash tables configured (established 8192 bind 8192) (Posix.py|771)
[7] [Apr 23 17:20:57] >>> TCP: reno registered (Posix.py|771)
[7] [Apr 23 17:20:57] >>> UDP hash table entries: 512 (order: 2, 16384 bytes) (Posix.py|771)
[7] [Apr 23 17:20:57] >>> UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) (Posix.py|771)
[7] [Apr 23 17:20:57] >>> NET: Registered protocol family 1 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> pci 0000:00:02.0: Boot video device (Posix.py|771)
[7] [Apr 23 17:20:57] >>> PCI: CLS 64 bytes, default 64 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> Trying to unpack rootfs image as initramfs... (Posix.py|771)
[7] [Apr 23 17:20:57] >>> Freeing initrd memory: 83300k freed (Posix.py|771)
[7] [Apr 23 17:20:57] >>> Simple Boot Flag at 0x7a set to 0x1 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> audit: initializing netlink socket (disabled) (Posix.py|771)
[7] [Apr 23 17:20:57] >>> type=2000 audit(1398273590.779:1): initialized (Posix.py|771)
[7] [Apr 23 17:20:57] >>> bounce pool size: 64 pages (Posix.py|771)
[7] [Apr 23 17:20:57] >>> HugeTLB registered 4 MB page size, pre-allocated 0 pages (Posix.py|771)
[7] [Apr 23 17:20:57] >>> msgmni has been set to 1730 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) (Posix.py|771)
[7] [Apr 23 17:20:57] >>> io scheduler noop registered (Posix.py|771)
[7] [Apr 23 17:20:57] >>> io scheduler deadline registered (default) (Posix.py|771)
[7] [Apr 23 17:20:57] >>> io scheduler cfq registered (Posix.py|771)
[7] [Apr 23 17:20:57] >>> pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X (Posix.py|771)
[7] [Apr 23 17:20:57] >>> pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X (Posix.py|771)
[7] [Apr 23 17:20:57] >>> vesafb: mode is 1024x768x16, linelength=2048, pages=4 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> vesafb: scrolling: redraw (Posix.py|771)
[7] [Apr 23 17:20:57] >>> vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> vesafb: framebuffer at 0xe0000000, mapped to 0xf8080000, using 3072k, total 7872k (Posix.py|771)
[7] [Apr 23 17:20:57] >>> Console: switching to colour frame buffer device 128x48 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> fb0: VESA VGA frame buffer device (Posix.py|771)
[7] [Apr 23 17:20:57] >>> intel_rng: Firmware space is locked read-only. If you can't or (Posix.py|771)
[7] [Apr 23 17:20:57] >>> intel_rng: don't want to disable this in firmware setup, and if (Posix.py|771)
[7] [Apr 23 17:20:57] >>> intel_rng: you are certain that your system has a functional (Posix.py|771)
[7] [Apr 23 17:20:57] >>> intel_rng: RNG, try using the 'no_fwh_detect' option. (Posix.py|771)
[7] [Apr 23 17:20:57] >>> Linux agpgart interface v0.103 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> brd: module loaded (Posix.py|771)
[7] [Apr 23 17:20:57] >>> Loading iSCSI transport class v2.0-870. (Posix.py|771)
[7] [Apr 23 17:20:57] >>> i8042: PNP: No PS/2 controller found. Probing ports directly. (Posix.py|771)
[7] [Apr 23 17:20:57] >>> serio: i8042 KBD port at 0x60,0x64 irq 1 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> serio: i8042 AUX port at 0x60,0x64 irq 12 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> mousedev: PS/2 mouse device common for all mice (Posix.py|771)
[7] [Apr 23 17:20:57] >>> cpuidle: using governor ladder (Posix.py|771)
[7] [Apr 23 17:20:57] >>> TCP: cubic registered (Posix.py|771)
[7] [Apr 23 17:20:57] >>> NET: Registered protocol family 15 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> Key type dns_resolver registered (Posix.py|771)
[7] [Apr 23 17:20:57] >>> Using IPI No-Shortcut mode (Posix.py|771)
[7] [Apr 23 17:20:57] >>> tsc: Refined TSC clocksource calibration: 2793.072 MHz (Posix.py|771)
[7] [Apr 23 17:20:57] >>> Switching to clocksource tsc (Posix.py|771)
[7] [Apr 23 17:20:57] >>> floppy0: no floppy controllers found (Posix.py|771)
[7] [Apr 23 17:20:57] >>> work still pending (Posix.py|771)
[7] [Apr 23 17:20:57] >>> Freeing unused kernel memory: 436k freed (Posix.py|771)
[7] [Apr 23 17:20:57] >>> udevd (918): /proc/918/oom_adj is deprecated, please use /proc/918/oom_score_adj instead. (Posix.py|771)
[7] [Apr 23 17:20:57] >>> microcode: CPU0 sig=0xf47, pf=0x10, revision=0x3 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> pps_core: LinuxPPS API ver. 1 registered (Posix.py|771)
[7] [Apr 23 17:20:57] >>> pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> (Posix.py|771)
[7] [Apr 23 17:20:57] >>> PTP clock support registered (Posix.py|771)
[7] [Apr 23 17:20:57] >>> tg3.c:v3.132 (May 21, 2013) (Posix.py|771)
[7] [Apr 23 17:20:57] >>> ACPI: bus type ATA registered (Posix.py|771)
[7] [Apr 23 17:20:57] >>> ACPI: bus type USB registered (Posix.py|771)
[7] [Apr 23 17:20:57] >>> usbcore: registered new interface driver usbfs (Posix.py|771)
[7] [Apr 23 17:20:57] >>> usbcore: registered new interface driver hub (Posix.py|771)
[7] [Apr 23 17:20:57] >>> dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) (Posix.py|771)
[7] [Apr 23 17:20:57] >>> input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> ACPI: Power Button [VBTN] (Posix.py|771)
[7] [Apr 23 17:20:57] >>> input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> ACPI: Power Button [PWRF] (Posix.py|771)
[7] [Apr 23 17:20:57] >>> libata version 3.00 loaded. (Posix.py|771)
[7] [Apr 23 17:20:57] >>> ata_piix 0000:00:1f.1: version 2.13 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> ata_piix 0000:00:1f.1: setting latency timer to 64 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> usbcore: registered new device driver usb (Posix.py|771)
[7] [Apr 23 17:20:57] >>> uhci_hcd: USB Universal Host Controller Interface driver (Posix.py|771)
[7] [Apr 23 17:20:57] >>> ahc_pci:3:2:0: Host Adapter Bios disabled. Using default SCSI device parameters (Posix.py|771)
[7] [Apr 23 17:20:57] >>> scsi0 : ata_piix (Posix.py|771)
[7] [Apr 23 17:20:57] >>> scsi2 : ata_piix (Posix.py|771)
[7] [Apr 23 17:20:57] >>> ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> ata2: port disabled--ignoring (Posix.py|771)
[7] [Apr 23 17:20:57] >>> tg3 0000:01:00.0 eth0: Tigon3 [partno(BCM5751PKFBG) rev 4001] (PCI Express) MAC address 00:18:8b:1e:0f:fa (Posix.py|771)
[7] [Apr 23 17:20:57] >>> tg3 0000:01:00.0 eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) (Posix.py|771)
[7] [Apr 23 17:20:57] >>> tg3 0000:01:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] (Posix.py|771)
[7] [Apr 23 17:20:57] >>> tg3 0000:01:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit] (Posix.py|771)
[7] [Apr 23 17:20:57] >>> Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled (Posix.py|771)
[7] [Apr 23 17:20:57] >>> uhci_hcd 0000:00:1d.0: setting latency timer to 64 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> uhci_hcd 0000:00:1d.0: UHCI Host Controller (Posix.py|771)
[7] [Apr 23 17:20:57] >>> uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000ff80 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> hub 1-0:1.0: USB hub found (Posix.py|771)
[7] [Apr 23 17:20:57] >>> hub 1-0:1.0: 2 ports detected (Posix.py|771)
[7] [Apr 23 17:20:57] >>> uhci_hcd 0000:00:1d.1: setting latency timer to 64 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> uhci_hcd 0000:00:1d.1: UHCI Host Controller (Posix.py|771)
[7] [Apr 23 17:20:57] >>> uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> uhci_hcd 0000:00:1d.1: irq 22, io base 0x0000ff60 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver (Posix.py|771)
[7] [Apr 23 17:20:57] >>> Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after (Posix.py|771)
[7] [Apr 23 17:20:57] >>> ehci-pci: EHCI PCI platform driver (Posix.py|771)
[7] [Apr 23 17:20:57] >>> hub 2-0:1.0: USB hub found (Posix.py|771)
[7] [Apr 23 17:20:57] >>> hub 2-0:1.0: 2 ports detected (Posix.py|771)
[7] [Apr 23 17:20:57] >>> microcode: CPU1 sig=0xf47, pf=0x10, revision=0x3 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> uhci_hcd 0000:00:1d.2: setting latency timer to 64 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> uhci_hcd 0000:00:1d.2: UHCI Host Controller (Posix.py|771)
[7] [Apr 23 17:20:57] >>> uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> hub 3-0:1.0: USB hub found (Posix.py|771)
[7] [Apr 23 17:20:57] >>> hub 3-0:1.0: 2 ports detected (Posix.py|771)
[7] [Apr 23 17:20:57] >>> 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A (Posix.py|771)
[7] [Apr 23 17:20:57] >>> uhci_hcd 0000:00:1d.3: setting latency timer to 64 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> uhci_hcd 0000:00:1d.3: UHCI Host Controller (Posix.py|771)
[7] [Apr 23 17:20:57] >>> uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> uhci_hcd 0000:00:1d.3: irq 23, io base 0x0000ff20 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> hub 4-0:1.0: USB hub found (Posix.py|771)
[7] [Apr 23 17:20:57] >>> hub 4-0:1.0: 2 ports detected (Posix.py|771)
[7] [Apr 23 17:20:57] >>> microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba (Posix.py|771)
[7] [Apr 23 17:20:57] >>> ata_piix 0000:00:1f.2: MAP [ (Posix.py|771)
[7] [Apr 23 17:20:57] >>> P0 P2 P1 P3 ] (Posix.py|771)
[7] [Apr 23 17:20:57] >>> ata_piix 0000:00:1f.2: setting latency timer to 64 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> scsi3 : ata_piix (Posix.py|771)
[7] [Apr 23 17:20:57] >>> scsi4 : ata_piix (Posix.py|771)
[7] [Apr 23 17:20:57] >>> ata3: SATA max UDMA/133 cmd 0xfe00 ctl 0xfe10 bmdma 0xfea0 irq 20 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> ata4: SATA max UDMA/133 cmd 0xfe20 ctl 0xfe30 bmdma 0xfea8 irq 20 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> ehci-pci 0000:00:1d.7: setting latency timer to 64 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> ata1.00: ATAPI: TSSTcorpCD/DVDW SH-S182M, SB01, max UDMA/33 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> ata1.01: ATAPI: LITE-ON DVD SHD-16P1S, GS05, max UDMA/33 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> usb 2-1: new full-speed USB device number 2 using uhci_hcd (Posix.py|771)
[7] [Apr 23 17:20:57] >>> ata1.00: configured for UDMA/33 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> ata1.01: configured for UDMA/33 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> scsi 0:0:0:0: CD-ROM TSSTcorp CD/DVDW SH-S182M SB01 PQ: 0 ANSI: 5 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> scsi 0:0:1:0: CD-ROM LITE-ON DVD SHD-16P1S GS05 PQ: 0 ANSI: 5 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> ata3.00: ATA-7: ST3250620NS, 3.AEG, max UDMA/133 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> ata3.00: 488397168 sectors, multi 8: LBA48 NCQ (depth 0/32) (Posix.py|771)
[7] [Apr 23 17:20:57] >>> hub 2-1:1.0: USB hub found (Posix.py|771)
[7] [Apr 23 17:20:57] >>> hub 2-1:1.0: 4 ports detected (Posix.py|771)
[7] [Apr 23 17:20:57] >>> usb 2-1: USB disconnect, device number 2 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> ata3.00: configured for UDMA/133 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> scsi 3:0:0:0: Direct-Access ATA ST3250620NS 3.AE PQ: 0 ANSI: 5 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> usb 4-2: new low-speed USB device number 2 using uhci_hcd (Posix.py|771)
[7] [Apr 23 17:20:57] >>> usb 4-2: USB disconnect, device number 2 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> ehci-pci 0000:00:1d.7: EHCI Host Controller (Posix.py|771)
[7] [Apr 23 17:20:57] >>> ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 5 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> ehci-pci 0000:00:1d.7: debug port 1 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> ehci-pci 0000:00:1d.7: cache line size of 64 is not supported (Posix.py|771)
[7] [Apr 23 17:20:57] >>> ehci-pci 0000:00:1d.7: irq 21, io mem 0xffa80800 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> usbcore: registered new interface driver usbhid (Posix.py|771)
[7] [Apr 23 17:20:57] >>> usbhid: USB HID core driver (Posix.py|771)
[7] [Apr 23 17:20:57] >>> ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> hub 5-0:1.0: USB hub found (Posix.py|771)
[7] [Apr 23 17:20:57] >>> hub 5-0:1.0: 8 ports detected (Posix.py|771)
[7] [Apr 23 17:20:57] >>> hub 1-0:1.0: USB hub found (Posix.py|771)
[7] [Apr 23 17:20:57] >>> hub 1-0:1.0: 2 ports detected (Posix.py|771)
[7] [Apr 23 17:20:57] >>> hub 2-0:1.0: USB hub found (Posix.py|771)
[7] [Apr 23 17:20:57] >>> hub 2-0:1.0: 2 ports detected (Posix.py|771)
[7] [Apr 23 17:20:57] >>> hub 3-0:1.0: USB hub found (Posix.py|771)
[7] [Apr 23 17:20:57] >>> hub 3-0:1.0: 2 ports detected (Posix.py|771)
[7] [Apr 23 17:20:57] >>> hub 4-0:1.0: USB hub found (Posix.py|771)
[7] [Apr 23 17:20:57] >>> hub 4-0:1.0: 2 ports detected (Posix.py|771)
[7] [Apr 23 17:20:57] >>> sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray (Posix.py|771)
[7] [Apr 23 17:20:57] >>> cdrom: Uniform CD-ROM driver Revision: 3.20 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> sr 0:0:0:0: Attached scsi CD-ROM sr0 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> sr1: scsi3-mmc drive: 4x/48x cd/rw xa/form2 cdda tray (Posix.py|771)
[7] [Apr 23 17:20:57] >>> sr 0:0:1:0: Attached scsi CD-ROM sr1 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> sr 0:0:0:0: Attached scsi generic sg0 type 5 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> sr 0:0:1:0: Attached scsi generic sg1 type 5 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> scsi 3:0:0:0: Attached scsi generic sg2 type 0 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> usb 2-1: new full-speed USB device number 3 using uhci_hcd (Posix.py|771)
[7] [Apr 23 17:20:57] >>> usb 2-1: not running at top speed; connect to a high speed hub (Posix.py|771)
[7] [Apr 23 17:20:57] >>> hub 2-1:1.0: USB hub found (Posix.py|771)
[7] [Apr 23 17:20:57] >>> hub 2-1:1.0: 4 ports detected (Posix.py|771)
[7] [Apr 23 17:20:57] >>> usb 4-2: new low-speed USB device number 3 using uhci_hcd (Posix.py|771)
[7] [Apr 23 17:20:57] >>> input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.3/usb4/4-2/4-2:1.0/input/input2 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> hid-generic 0003:046D:C00E.0001: input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.3-2/input0 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> usb 2-1.2: new low-speed USB device number 4 using uhci_hcd (Posix.py|771)
[7] [Apr 23 17:20:57] >>> input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1.2/2-1.2:1.0/input/input3 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> logitech 0003:046D:C517.0002: input: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.1-1.2/input0 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> logitech 0003:046D:C517.0003: fixing up Logitech keyboard report descriptor (Posix.py|771)
[7] [Apr 23 17:20:57] >>> input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1.2/2-1.2:1.1/input/input4 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> logitech 0003:046D:C517.0003: input,hiddev0: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.1-1.2/input1 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> usb 2-1: USB disconnect, device number 3 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> usb 2-1.2: USB disconnect, device number 4 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> sd 3:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) (Posix.py|771)
[7] [Apr 23 17:20:57] >>> sd 3:0:0:0: [sda] Write Protect is off (Posix.py|771)
[7] [Apr 23 17:20:57] >>> sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA (Posix.py|771)
[7] [Apr 23 17:20:57] >>> sda: sda1 sda2 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> sd 3:0:0:0: [sda] Attached SCSI disk (Posix.py|771)
[7] [Apr 23 17:20:57] >>> usb 2-1: new full-speed USB device number 5 using uhci_hcd (Posix.py|771)
[7] [Apr 23 17:20:57] >>> usb 2-1: not running at top speed; connect to a high speed hub (Posix.py|771)
[7] [Apr 23 17:20:57] >>> hub 2-1:1.0: USB hub found (Posix.py|771)
[7] [Apr 23 17:20:57] >>> hub 2-1:1.0: 4 ports detected (Posix.py|771)
[7] [Apr 23 17:20:57] >>> usb 2-1.2: new low-speed USB device number 6 using uhci_hcd (Posix.py|771)
[7] [Apr 23 17:20:57] >>> input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1.2/2-1.2:1.0/input/input5 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> logitech 0003:046D:C517.0004: input: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.1-1.2/input0 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> logitech 0003:046D:C517.0005: fixing up Logitech keyboard report descriptor (Posix.py|771)
[7] [Apr 23 17:20:57] >>> input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1.2/2-1.2:1.1/input/input6 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> logitech 0003:046D:C517.0005: input,hiddev0: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.1-1.2/input1 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> scsi1 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> <Adaptec 2902/04/10/15/20C/30C SCSI adapter> (Posix.py|771)
[7] [Apr 23 17:20:57] >>> aic7850: Single Channel A, SCSI Id=7, 3/253 SCBs (Posix.py|771)
[7] [Apr 23 17:20:57] >>> (Posix.py|771)
[7] [Apr 23 17:20:57] >>> device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com (Posix.py|771)
[7] [Apr 23 17:20:57] >>> NET: Registered protocol family 17 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> tg3 0000:01:00.0 eth0: Link is up at 1000 Mbps, full duplex (Posix.py|771)
[7] [Apr 23 17:20:57] >>> tg3 0000:01:00.0 eth0: Flow control is off for TX and off for RX (Posix.py|771)
[7] [Apr 23 17:20:57] Exit code: 0 (Posix.py|778)
[6] [Apr 23 17:20:57] Executing: lsmod (Posix.py|690)
[6] [Apr 23 17:20:57] Using encoding 'UTF-8' (Posix.py|721)
[7] [Apr 23 17:20:57] >>> Module Size Used by (Posix.py|771)
[7] [Apr 23 17:20:57] >>> af_packet 22470 2 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> dm_mod 58724 0 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> sd_mod 29044 0 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> joydev 7585 0 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> sg 20834 0 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> sr_mod 12945 0 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> cdrom 29992 1 sr_mod (Posix.py|771)
[7] [Apr 23 17:20:57] >>> ata_generic 2482 0 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> usbhid 32342 0 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> pata_acpi 2383 0 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> evdev 7986 0 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> ehci_pci 3068 0 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> ehci_hcd 33513 1 ehci_pci (Posix.py|771)
[7] [Apr 23 17:20:57] >>> 8250 21981 0 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> serial_core 17232 1 8250 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> uhci_hcd 19082 0 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> aic7xxx 103352 0 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> ata_piix 19496 0 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> serio_raw 3601 0 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> button 3374 0 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> libata 144246 3 ata_generic,pata_acpi,ata_piix (Posix.py|771)
[7] [Apr 23 17:20:57] >>> dcdbas 4292 0 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> usbcore 123155 4 usbhid,ehci_pci,ehci_hcd,uhci_hcd (Posix.py|771)
[7] [Apr 23 17:20:57] >>> processor 17657 0 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> tg3 141173 0 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> libphy 16202 1 tg3 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> hwmon 989 1 tg3 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> ptp 6908 1 tg3 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> pps_core 5569 1 ptp (Posix.py|771)
[7] [Apr 23 17:20:57] >>> microcode 5233 0 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> usb_common 1156 1 usbcore (Posix.py|771)
[7] [Apr 23 17:20:57] Exit code: 0 (Posix.py|778)
[6] [Apr 23 17:20:57] Executing: cat /etc/environment (Posix.py|690)
[6] [Apr 23 17:20:57] Using encoding 'UTF-8' (Posix.py|721)
[7] [Apr 23 17:20:57] >>> LANG="de_DE.UTF8" (Posix.py|771)
[7] [Apr 23 17:20:57] >>> LANGUAGE="de" (Posix.py|771)
[7] [Apr 23 17:20:57] >>> LC_ALL="de_DE.UTF8" (Posix.py|771)
[7] [Apr 23 17:20:57] Exit code: 0 (Posix.py|778)
[6] [Apr 23 17:20:57] Executing: env 2>&1 (Posix.py|690)
[6] [Apr 23 17:20:57] Using encoding 'UTF-8' (Posix.py|721)
[7] [Apr 23 17:20:57] >>> UPSTART_INSTANCE= (Posix.py|771)
[7] [Apr 23 17:20:57] >>> LANGUAGE=de (Posix.py|771)
[7] [Apr 23 17:20:57] >>> UPSTART_JOB=opsi (Posix.py|771)
[7] [Apr 23 17:20:57] >>> TERM=screen (Posix.py|771)
[7] [Apr 23 17:20:57] >>> PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin (Posix.py|771)
[7] [Apr 23 17:20:57] >>> LANG=de_DE.UTF8 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> STY=4415.tty6.opsi-client (Posix.py|771)
[7] [Apr 23 17:20:57] >>> SHELL=/bin/sh (Posix.py|771)
[7] [Apr 23 17:20:57] >>> UPSTART_EVENTS=opsi-init (Posix.py|771)
[7] [Apr 23 17:20:57] >>> WINDOW=0 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> PWD=/dev (Posix.py|771)
[7] [Apr 23 17:20:57] >>> LC_ALL=de_DE.UTF8 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> TERMCAP=SC|screen|VT 100/ANSI X3.64 virtual terminal:\ (Posix.py|771)
[7] [Apr 23 17:20:57] >>> :DO=\E[%dB:LE=\E[%dD:RI=\E[%dC:UP=\E[%dA:bs:bt=\E[Z:\ (Posix.py|771)
[7] [Apr 23 17:20:57] >>> :cd=\E[J:ce=\E[K:cl=\E[H\E[J:cm=\E[%i%d;%dH:ct=\E[3g:\ (Posix.py|771)
[7] [Apr 23 17:20:57] >>> :do=^J:nd=\E[C:pt:rc=\E8:rs=\Ec:sc=\E7:st=\EH:up=\EM:\ (Posix.py|771)
[7] [Apr 23 17:20:57] >>> :le=^H:bl=^G:cr=^M:it#8:ho=\E[H:nw=\EE:ta=^I:is=\E)0:\ (Posix.py|771)
[7] [Apr 23 17:20:57] >>> :li#48:co#128:am:xn:xv:LP:sr=\EM:al=\E[L:AL=\E[%dL:\ (Posix.py|771)
[7] [Apr 23 17:20:57] >>> :cs=\E[%i%d;%dr:dl=\E[M:DL=\E[%dM:dc=\E[P:DC=\E[%dP:\ (Posix.py|771)
[7] [Apr 23 17:20:57] >>> :im=\E[4h:ei=\E[4l:mi:IC=\E[%d@:ks=\E[?1h\E=:\ (Posix.py|771)
[7] [Apr 23 17:20:57] >>> :ke=\E[?1l\E>:vi=\E[?25l:ve=\E[34h\E[?25h:vs=\E[34l:\ (Posix.py|771)
[7] [Apr 23 17:20:57] >>> :ti=\E[?1049h:te=\E[?1049l:us=\E[4m:ue=\E[24m:so=\E[3m:\ (Posix.py|771)
[7] [Apr 23 17:20:57] >>> :se=\E[23m:mb=\E[5m:md=\E[1m:mh=\E[2m:mr=\E[7m:\ (Posix.py|771)
[7] [Apr 23 17:20:57] >>> :me=\E[m:ms:\ (Posix.py|771)
[7] [Apr 23 17:20:57] >>> :Co#8:pa#64:AF=\E[3%dm:AB=\E[4%dm:op=\E[39;49m:AX:\ (Posix.py|771)
[7] [Apr 23 17:20:57] >>> :vb=\Eg:as=\E(0:ae=\E(B:\ (Posix.py|771)
[7] [Apr 23 17:20:57] >>> :ac=\140\140aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~..--++,,hhII00:\ (Posix.py|771)
[7] [Apr 23 17:20:57] >>> :k0=\E[10~:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:k5=\E[15~:\ (Posix.py|771)
[7] [Apr 23 17:20:57] >>> :k6=\E[17~:k7=\E[18~:k8=\E[19~:k9=\E[20~:k;=\E[21~:\ (Posix.py|771)
[7] [Apr 23 17:20:57] >>> :F1=\E[23~:F2=\E[24~:F3=\E[25~:F4=\E[26~:F5=\E[28~:\ (Posix.py|771)
[7] [Apr 23 17:20:57] >>> :F6=\E[29~:F7=\E[31~:F8=\E[32~:F9=\E[33~:FA=\E[34~:kb=:\ (Posix.py|771)
[7] [Apr 23 17:20:57] >>> :K2=\E[G:kB=\E[Z:kh=\E[1~:@1=\E[1~:kH=\E[4~:@7=\E[4~:\ (Posix.py|771)
[7] [Apr 23 17:20:57] >>> :kN=\E[6~:kP=\E[5~:kI=\E[2~:kD=\E[3~:ku=\EOA:kd=\EOB:\ (Posix.py|771)
[7] [Apr 23 17:20:57] >>> :kr=\EOC:kl=\EOD: (Posix.py|771)
[7] [Apr 23 17:20:57] Exit code: 0 (Posix.py|778)
[6] [Apr 23 17:20:57] Executing: locale 2>&1 (Posix.py|690)
[6] [Apr 23 17:20:57] Using encoding 'UTF-8' (Posix.py|721)
[7] [Apr 23 17:20:57] >>> LANG=de_DE.UTF8 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> LANGUAGE=de (Posix.py|771)
[7] [Apr 23 17:20:57] >>> LC_CTYPE="de_DE.UTF8" (Posix.py|771)
[7] [Apr 23 17:20:57] >>> LC_NUMERIC="de_DE.UTF8" (Posix.py|771)
[7] [Apr 23 17:20:57] >>> LC_TIME="de_DE.UTF8" (Posix.py|771)
[7] [Apr 23 17:20:57] >>> LC_COLLATE="de_DE.UTF8" (Posix.py|771)
[7] [Apr 23 17:20:57] >>> LC_MONETARY="de_DE.UTF8" (Posix.py|771)
[7] [Apr 23 17:20:57] >>> LC_MESSAGES="de_DE.UTF8" (Posix.py|771)
[7] [Apr 23 17:20:57] >>> LC_PAPER="de_DE.UTF8" (Posix.py|771)
[7] [Apr 23 17:20:57] >>> LC_NAME="de_DE.UTF8" (Posix.py|771)
[7] [Apr 23 17:20:57] >>> LC_ADDRESS="de_DE.UTF8" (Posix.py|771)
[7] [Apr 23 17:20:57] >>> LC_TELEPHONE="de_DE.UTF8" (Posix.py|771)
[7] [Apr 23 17:20:57] >>> LC_MEASUREMENT="de_DE.UTF8" (Posix.py|771)
[7] [Apr 23 17:20:57] >>> LC_IDENTIFICATION="de_DE.UTF8" (Posix.py|771)
[7] [Apr 23 17:20:57] >>> LC_ALL=de_DE.UTF8 (Posix.py|771)
[7] [Apr 23 17:20:57] Exit code: 0 (Posix.py|778)
[6] [Apr 23 17:20:57] Executing: swapoff -a (Posix.py|690)
[6] [Apr 23 17:20:57] Using encoding 'UTF-8' (Posix.py|721)
[7] [Apr 23 17:20:57] Exit code: 0 (Posix.py|778)
[6] [Apr 23 17:20:57] Found ethernet device: 'eth0' (Posix.py|377)
[7] [Apr 23 17:20:57] Command 'ifconfig' found at: '/sbin/ifconfig' (Posix.py|669)
[6] [Apr 23 17:20:57] Executing: /sbin/ifconfig eth0 up (Posix.py|690)
[6] [Apr 23 17:20:57] Using encoding 'UTF-8' (Posix.py|721)
[7] [Apr 23 17:20:57] Exit code: 0 (Posix.py|778)
[6] [Apr 23 17:20:57] Executing: mii-tool eth0 (Posix.py|690)
[6] [Apr 23 17:20:57] Using encoding 'UTF-8' (Posix.py|721)
[7] [Apr 23 17:20:57] >>> eth0: negotiated 1000baseT-FD flow-control, link ok (Posix.py|771)
[7] [Apr 23 17:20:57] Exit code: 0 (Posix.py|778)
[6] [Apr 23 17:20:57] Executing: ethtool eth0 (Posix.py|690)
[6] [Apr 23 17:20:57] Using encoding 'UTF-8' (Posix.py|721)
[7] [Apr 23 17:20:57] >>> Settings for eth0: (Posix.py|771)
[7] [Apr 23 17:20:57] >>> Supported ports: [ TP ] (Posix.py|771)
[7] [Apr 23 17:20:57] >>> Supported link modes: 10baseT/Half 10baseT/Full (Posix.py|771)
[7] [Apr 23 17:20:57] >>> 100baseT/Half 100baseT/Full (Posix.py|771)
[7] [Apr 23 17:20:57] >>> 1000baseT/Half 1000baseT/Full (Posix.py|771)
[7] [Apr 23 17:20:57] >>> Supports auto-negotiation: Yes (Posix.py|771)
[7] [Apr 23 17:20:57] >>> Advertised link modes: 10baseT/Half 10baseT/Full (Posix.py|771)
[7] [Apr 23 17:20:57] >>> 100baseT/Half 100baseT/Full (Posix.py|771)
[7] [Apr 23 17:20:57] >>> 1000baseT/Half 1000baseT/Full (Posix.py|771)
[7] [Apr 23 17:20:57] >>> Advertised pause frame use: Symmetric (Posix.py|771)
[7] [Apr 23 17:20:57] >>> Advertised auto-negotiation: Yes (Posix.py|771)
[7] [Apr 23 17:20:57] >>> Link partner advertised link modes: 10baseT/Half 10baseT/Full (Posix.py|771)
[7] [Apr 23 17:20:57] >>> 100baseT/Half 100baseT/Full (Posix.py|771)
[7] [Apr 23 17:20:57] >>> 1000baseT/Full (Posix.py|771)
[7] [Apr 23 17:20:57] >>> Link partner advertised pause frame use: No (Posix.py|771)
[7] [Apr 23 17:20:57] >>> Link partner advertised auto-negotiation: Yes (Posix.py|771)
[7] [Apr 23 17:20:57] >>> Speed: 1000Mb/s (Posix.py|771)
[7] [Apr 23 17:20:57] >>> Duplex: Full (Posix.py|771)
[7] [Apr 23 17:20:57] >>> Port: Twisted Pair (Posix.py|771)
[7] [Apr 23 17:20:57] >>> PHYAD: 1 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> Transceiver: internal (Posix.py|771)
[7] [Apr 23 17:20:57] >>> Auto-negotiation: on (Posix.py|771)
[7] [Apr 23 17:20:57] >>> MDI-X: on (Posix.py|771)
[7] [Apr 23 17:20:57] >>> Supports Wake-on: g (Posix.py|771)
[7] [Apr 23 17:20:57] >>> Wake-on: g (Posix.py|771)
[7] [Apr 23 17:20:57] >>> Current message level: 0x000000ff (255) (Posix.py|771)
[7] [Apr 23 17:20:57] >>> Link detected: yes (Posix.py|771)
[7] [Apr 23 17:20:57] Exit code: 0 (Posix.py|778)
[5] [Apr 23 17:20:57] Detected link on device 'eth0' (master.py|668)
[5] [Apr 23 17:20:57] Only using network devices with link detected: eth0 (master.py|673)
[5] [Apr 23 17:20:57] Waiting for network devices to get configured by dhcp (master.py|680)
[6] [Apr 23 17:20:57] Executing: /sbin/ifconfig eth0 (Posix.py|690)
[6] [Apr 23 17:20:57] Using encoding 'UTF-8' (Posix.py|721)
[7] [Apr 23 17:20:57] >>> eth0 Link encap:Ethernet HWaddr 00:18:8b:1e:0f:fa (Posix.py|771)
[7] [Apr 23 17:20:57] >>> inet addr:192.168.168.104 Bcast:192.168.168.255 Mask:255.255.255.0 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> RX packets:17 errors:0 dropped:0 overruns:0 frame:0 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> TX packets:2 errors:0 dropped:0 overruns:0 carrier:0 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> collisions:0 txqueuelen:1000 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> RX bytes:2054 (2.0 KB) TX bytes:692 (692.0 B) (Posix.py|771)
[7] [Apr 23 17:20:57] >>> Interrupt:16 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> (Posix.py|771)
[7] [Apr 23 17:20:57] Exit code: 0 (Posix.py|778)
[7] [Apr 23 17:20:57] Command 'ip' found at: '/sbin/ip' (Posix.py|669)
[6] [Apr 23 17:20:57] Executing: /sbin/ip route (Posix.py|690)
[6] [Apr 23 17:20:57] Using encoding 'UTF-8' (Posix.py|721)
[7] [Apr 23 17:20:57] >>> default via 192.168.168.254 dev eth0 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> 192.168.168.0/24 dev eth0 proto kernel scope link src 192.168.168.104 (Posix.py|771)
[7] [Apr 23 17:20:57] Exit code: 0 (Posix.py|778)
[5] [Apr 23 17:20:57] All network devices configured (master.py|690)
[5] [Apr 23 17:20:57] Getting dhcp result for device: eth0 (master.py|710)
[6] [Apr 23 17:20:57] DHCP result for device eth0:
{
"domain" : "gzbg.local",
"dhcp-server-identifier" : "192.168.168.9",
"nameservers" : "192.168.168.9,192.168.168.254",
"ip" : "192.168.168.104",
"routers" : "192.168.168.254",
"subnet-mask" : "255.255.255.0",
"netmask" : "255.255.255.0",
"renew" : "4 2014/04/24 15:51:39",
"domain-name" : "gzbg.local",
"domain-name-servers" : "192.168.168.9,192.168.168.254",
"gateways" : "192.168.168.254",
"expire" : "5 2014/04/25 17:20:54",
"netbios-name-servers" : "192.168.168.9",
"bootserver" : "192.168.168.9",
"fixed-address" : "192.168.168.104"
} (master.py|712)
[6] [Apr 23 17:20:57] Executing: /sbin/ifconfig eth0 (Posix.py|690)
[6] [Apr 23 17:20:57] Using encoding 'UTF-8' (Posix.py|721)
[7] [Apr 23 17:20:57] >>> eth0 Link encap:Ethernet HWaddr 00:18:8b:1e:0f:fa (Posix.py|771)
[7] [Apr 23 17:20:57] >>> inet addr:192.168.168.104 Bcast:192.168.168.255 Mask:255.255.255.0 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> RX packets:17 errors:0 dropped:0 overruns:0 frame:0 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> TX packets:2 errors:0 dropped:0 overruns:0 carrier:0 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> collisions:0 txqueuelen:1000 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> RX bytes:2054 (2.0 KB) TX bytes:692 (692.0 B) (Posix.py|771)
[7] [Apr 23 17:20:57] >>> Interrupt:16 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> (Posix.py|771)
[7] [Apr 23 17:20:57] Exit code: 0 (Posix.py|778)
[6] [Apr 23 17:20:57] Executing: /sbin/ip route (Posix.py|690)
[6] [Apr 23 17:20:57] Using encoding 'UTF-8' (Posix.py|721)
[7] [Apr 23 17:20:57] >>> default via 192.168.168.254 dev eth0 (Posix.py|771)
[7] [Apr 23 17:20:57] >>> 192.168.168.0/24 dev eth0 proto kernel scope link src 192.168.168.104 (Posix.py|771)
[7] [Apr 23 17:20:57] Exit code: 0 (Posix.py|778)
[6] [Apr 23 17:20:57] Current network config: (master.py|744)
[6] [Apr 23 17:20:57] device : eth0 (master.py|745)
[6] [Apr 23 17:20:57] hardwareAddress : 00:18:8b:1e:0f:fa (master.py|746)
[6] [Apr 23 17:20:57] ipaddress : 192.168.168.104 (master.py|747)
[6] [Apr 23 17:20:57] netmask : 255.255.255.0 (master.py|748)
[6] [Apr 23 17:20:57] gateway : 192.168.168.254 (master.py|749)
[6] [Apr 23 17:20:57] nameserver : 192.168.168.9 (master.py|750)
[6] [Apr 23 17:20:57] hostname : (master.py|751)
[6] [Apr 23 17:20:57] domain : gzbg.local (master.py|752)
[6] [Apr 23 17:20:57] nextserver : (master.py|753)
[5] [Apr 23 17:20:57] pckey not found in kernel cmdline, trying to get boot configuration by tftp (master.py|840)
[6] [Apr 23 17:20:57] Connecting to tftpserver ':69' (master.py|842)
[6] [Apr 23 17:20:57] Trying to download pxelinux configuration file 'linux/pxelinux.cfg/01-00-18-8b-1e-0f-fa' (master.py|846)
[3] [Apr 23 17:20:57] Failed to get boot configuration from tftp server: argument for 's' must be a string (master.py|908)
---------------------------

Liebe Grüße
Ruben

Bootest du über tftp ? AFAIK liefert dein DHCP keinen next-server:

Hatte zuerst versucht per TFTP zu booten. Nachdem dies nicht funktioniert hat, habe ich die OPSI Boot CD verwendet. Dann kam allerdings dieser Fehler. Wenn man unter dem nextserver den OPSI-Server versteht, dann gebe ich diesen (genauso wie den Hostnamen) in einem Popup ein.

Next-Server ist eine DHCP Option. Dein Problem das dein DHCP den Next-Server nicht übermittelt. Fix das Problem und sowohl CD- als auch Netzwerkboot werden funktionieren.