forum.opsi.org

Verfasst: **05 Feb 2014, 12:33**

Hallo,
wenn ich auf einem Windows Client den opsi-client-agent erneut installiere, erscheint bei dem client einen Hinweis, dass ein Neustart durchgeführt werden muss. Es wird kein Timer festgelegt oder eine Option gegeben, in dem der User auswählen kann, ob der Neustart verschoben oder später ausgeführt wird.

Nach 10min ca. startet der Client auf einmal neu, ohne das der User auf Neustarten gedrückt hat. Er kann den Neustart nicht unterdrücken und alle Programme werden ohne speichern geschlossen.

Kann man dies auf dem opsi-server konfigurieren, das kein Neustart erzwungen wird?

Eine andere Frage noch:
Kann ich geplante Rollouts nach einer Uhrzeit festlegen? Momentan gehe ich hin und weise dem client über die Oberfläche das Paket zu. Dann setzte ich den Haken auf grün und löse das on_demand Ereignis aus.
Gibt es eine Möglichkeit das on_demand Ereignis zu einer festgelegten Uhrzeit auszuführen? Hintergrund ist der, das die Installation erst beginnen soll wenn der ausgeschalten wurde und beim nächsten Neustart die Pakete installiert werden.

Außerdem habe ich festgestellt, dass bei manchen Windows 7 clients auf den der opsi client installiert ist bei einer Reaktivierung nachdem der Rechner gesperrt wurde, manchmal bis zu 5 min benötigt bis die Windows Anmeldemaske erscheint. Hat jemand selbiges Phänomen?

Und noch eine Frage; Gibt es von opsi eine Möglichkeit ein Installation eines zu verteilenden Paketes komplett im Hintergrund durchzuführen? Sodass der User während dem Arbeiten nicht mitbekommt das eine software installiert oder geupdatet wird?

Verfasst: **05 Feb 2014, 13:25**

staybb hat geschrieben:Hallo,
wenn ich auf einem Windows Client den opsi-client-agent erneut installiere, erscheint bei dem client einen Hinweis, dass ein Neustart durchgeführt werden muss. Es wird kein Timer festgelegt oder eine Option gegeben, in dem der User auswählen kann, ob der Neustart verschoben oder später ausgeführt wird.

Nach 10min ca. startet der Client auf einmal neu, ohne das der User auf Neustarten gedrückt hat. Er kann den Neustart nicht unterdrücken und alle Programme werden ohne speichern geschlossen.

Kann man dies auf dem opsi-server konfigurieren, das kein Neustart erzwungen wird?

Wie installierst du den denn? Über das Deploymentscript kannst du mit dem Parameter -o -c den client direkt starten und den Neustart überspringen.
Machen wir auch immer so funktioniert problemlos.

staybb hat geschrieben: Eine andere Frage noch:
Kann ich geplante Rollouts nach einer Uhrzeit festlegen? Momentan gehe ich hin und weise dem client über die Oberfläche das Paket zu. Dann setzte ich den Haken auf grün und löse das on_demand Ereignis aus.
Gibt es eine Möglichkeit das on_demand Ereignis zu einer festgelegten Uhrzeit auszuführen? Hintergrund ist der, das die Installation erst beginnen soll wenn der ausgeschalten wurde und beim nächsten Neustart die Pakete installiert werden.

Das verstehe ich jez nicht ? On_Demand = Direkt, Wenn du kein On_demand machst wirds nach nem neustart vor der Anmeldung installiert.

staybb hat geschrieben:
Außerdem habe ich festgestellt, dass bei manchen Windows 7 clients auf den der opsi client installiert ist bei einer Reaktivierung nachdem der Rechner gesperrt wurde, manchmal bis zu 5 min benötigt bis die Windows Anmeldemaske erscheint. Hat jemand selbiges Phänomen?

Hatte ich auch mal. Ist jedoch schon lange nicht mehr aufgetreten. Das Problem
Welche opsi-client-agent version? Logdateien? dann kann man schauen woran es liegt

Und noch eine Frage; Gibt es von opsi eine Möglichkeit ein Installation eines zu verteilenden Paketes komplett im Hintergrund durchzuführen? Sodass der User während dem Arbeiten nicht mitbekommt das eine software installiert oder geupdatet wird?[/quote]

Ja man kann eigene events anlegen die dann entsprechend silent ablaufen. Das ist jedoch etwas komplizierter

Verfasst: **06 Feb 2014, 11:19**

Hallo tobias,

tobias hat geschrieben: Wie installierst du den denn? Über das Deploymentscript kannst du mit dem Parameter -o -c den client direkt starten und den Neustart überspringen.
Machen wir auch immer so funktioniert problemlos.

Ich hatte ihn über die opsi-Webkonsole installiert. Über die serverkonsole funktioniert es ohne Neustart, danke!
Dennoch, gibt es die Möglichkeit wenn ich den client über die Konsole installiere den Neustart zu deaktivieren oder dem user die Möglichkeit geben den Neustart zu verschieben?

staybb hat geschrieben: Eine andere Frage noch:
Kann ich geplante Rollouts nach einer Uhrzeit festlegen? Momentan gehe ich hin und weise dem client über die Oberfläche das Paket zu. Dann setzte ich den Haken auf grün und löse das on_demand Ereignis aus.
Gibt es eine Möglichkeit das on_demand Ereignis zu einer festgelegten Uhrzeit auszuführen? Hintergrund ist der, das die Installation erst beginnen soll wenn der ausgeschalten wurde und beim nächsten Neustart die Pakete installiert werden.

Das verstehe ich jez nicht ? On_Demand = Direkt, Wenn du kein On_demand machst wirds nach nem neustart vor der Anmeldung installiert.

Mein Fehler, ich bin davon ausgegangen das ich das on_demand absenden muss, damit auch nach einem Neustart der clients die Pakete installiert werden. Danke!

staybb hat geschrieben:
Außerdem habe ich festgestellt, dass bei manchen Windows 7 clients auf den der opsi client installiert ist bei einer Reaktivierung nachdem der Rechner gesperrt wurde, manchmal bis zu 5 min benötigt bis die Windows Anmeldemaske erscheint. Hat jemand selbiges Phänomen?

Hatte ich auch mal. Ist jedoch schon lange nicht mehr aufgetreten. Das Problem
Welche opsi-client-agent version? Logdateien? dann kann man schauen woran es liegt

Gestern hatte ich ein Rollout auf mehreren Rechner gestartet und heute morgen wurde mir bei einigen Rechner gemeldet, das nur ein blauer Bildschirm (vor dem Anmeldefenster von Windows 7) erscheint. Die User haben bis zu 20min gewartet, bei einem strg+alt+entf Signal kam dann die Anmeldemaske. Aber eben nicht bei dem ersten mal, dort erscheinte nur ein blauer leerer Bildschirm.
Das komische ist das es an meinem Rechner vor ein paar Tagen auch einmal vorkam, also ganz sporadisch..
In welcher logfile sollte ich nachschauen? Installiert ist der opsi-client-agent version 4.0.3.1

Das komische ist, das es eben nur bei manchen clients ganz sporadisch auftritt. Bevor ich nun das nächste Rollout starte auf den restlichen clients, sollte ich herausfinden an was es liegt.

Und noch eine Frage; Gibt es von opsi eine Möglichkeit ein Installation eines zu verteilenden Paketes komplett im Hintergrund durchzuführen? Sodass der User während dem Arbeiten nicht mitbekommt das eine software installiert oder geupdatet wird?[/quote]

Ja man kann eigene events anlegen die dann entsprechend silent ablaufen. Das ist jedoch etwas komplizierter

ok, in diesem Fall muss ich nochmal rechechieren. Oder hast du direkt ein Tip wo ich nachschauen könnte?

VIelen Dank

Verfasst: **06 Feb 2014, 13:02**

Das Problem ist das der opsiclientd nicht oder nicht richtig läuft, der Loginblocker wartet aber darauf das er das Signal bekommt nicht mehr zu blocken.
Daher die Frage nach den Logs.

Zum Silent Event:
Im Handbuch unter Event Konfiguration - ist nicht ganz einfach zur durchblicken

[event_silent]
action_processor_command = %action_processor.command% /sessionid %service_session% /silent
event_notifier_command =
super = on_demand

Als Hostparameter für die Clients kannst du es über den Configed so integrieren:

opsiclientd.event_silent.action_processor_command = %action_processor.command% /sessionid %service_session% /silent
opsiclientd.event_silent.event_notifier_command = <leer lassen>
opsiclientd.event_silent.super = on_demand

dann solltest du den Parameter configed.opsiclientd_events um den Eintrag silent erweitern. Configed Neustarten und dann kannst du es über das Menü "OpsiClient-event auslösen" abfeuern.

ACHTUNG: Das unbedachte rumspielen mit den Hostparametern kann dazu führen das die Clients den Server nicht mehr erreichen - ein Rückgängig machen ist dann nur durch Neuinstallation des Opsi-Clients möglich !
Also vorsichtig und am besten vorher in einer Testumgebung testen.
Ich übernehmen keine Verantwortung für die Richtigkeit der Konfigurationen !

Eventuell solltet ihr euch Gedanken über einen Supportvertrag/Schulung machen das ist manchmal sehr hilfreich !

Verfasst: **06 Feb 2014, 13:44**

tobias hat geschrieben:Das Problem ist das der opsiclientd nicht oder nicht richtig läuft, der Loginblocker wartet aber darauf das er das Signal bekommt nicht mehr zu blocken.
Daher die Frage nach den Logs.

Also was mir bei jedem client aufgefallen ist unter opsiconfd erscheint fast sekündlich die Meldung:

Code: Alles auswählen

Failed to read opsi modules file '/etc/opsi/modules': [Errno 2] No such file or directory: u'/etc/opsi/modules' (Backend.py|371)

Hängt es unter Umständen damit zusammen? Was kann ich da tun um den Fehler zu beheben?

Verfasst: **06 Feb 2014, 13:46**

nöp, da du keine module lizensiert hast, hast du keine modules - den fehler kannst du also ignorieren.

Interessant wäre ein Log direkt vom Client

Verfasst: **06 Feb 2014, 14:06**

tobias hat geschrieben:nöp, da du keine module lizensiert hast, hast du keine modules - den fehler kannst du also ignorieren.

Interessant wäre ein Log direkt vom Client

Habe hier mal die log von einem betroffenen client. Die log stammt direkt aus C:\opsi.org\log

Bei dem client wurde heute morgen noch flash und java verteilt. Das blaue hängende Bildschirmfenster tritt aber auch bei keiner Verteilung von Paketen auf.

Code: Alles auswählen

[5] [Feb 06 07:16:59:992] --
[5] [Feb 06 07:16:59:992] --
[1] [Feb 06 07:16:59:992] opsi-winst 4.11.3.6 started at >>06.02.2014 07:16:58
[1] [Feb 06 07:16:59:992] startmessage opsi-winst created at CentralForm.FormCreate: 06.02.2014 07:16:58
[1] [Feb 06 07:16:59:992] Loading skin from: C:\Program Files (x86)\opsi.org\opsi-client-agent\opsi-winst\winstskin
[1] [Feb 06 07:16:59:992] startmessage StartProgramModes and create log: 06.02.2014 07:16:59
[1] [Feb 06 07:16:59:992] startmessage start opsi service connection: 06.02.2014 07:16:59
[1] [Feb 06 07:16:59:992] JSON Bench for backend_info "params":[],"id":1} Start: 07:16:59:180 Time: 00:00:00:791
[1] [Feb 06 07:16:59:992] startmessage create log: 06.02.2014 07:16:59
[6] [Feb 06 07:16:59:992] JSON service request https://192.168.1.96:4447/rpc getDepotId
[6] [Feb 06 07:17:00:070] JSON Bench for getDepotId "params":["clientname.local"],"id":1} Start: 07:16:59:992 Time: 00:00:00:078
[6] [Feb 06 07:17:00:073] JSON service request https://192.168.1.96:4447/rpc backend_setOptions
[6] [Feb 06 07:17:00:118] JSON Bench for backend_setOptions "params":[{"processProductOnClientSequence":true}] Start: 07:17:00:073 Time: 00:00:00:045
[6] [Feb 06 07:17:00:120] JSON service request https://192.168.1.96:4447/rpc productOnClient_getObjects
[6] [Feb 06 07:17:00:372] JSON Bench for productOnClient_getObjects "params":["",{"clientId":"clientname.local", Start: 07:17:00:120 Time: 00:00:00:252
[6] [Feb 06 07:17:00:375] JSON service request https://192.168.1.96:4447/rpc backend_setOptions
[6] [Feb 06 07:17:00:438] JSON Bench for backend_setOptions "params":[{"processProductOnClientSequence":false} Start: 07:17:00:375 Time: 00:00:00:063
[5] [Feb 06 07:17:00:441] Computername:clientname.local
[5] [Feb 06 07:17:00:441] Computername according to Environment Variable :FIxxx
[5] [Feb 06 07:17:00:441] opsi service URL https://192.168.1.96:4447
[5] [Feb 06 07:17:00:441] Depot path:  p:\
[5] [Feb 06 07:17:00:441] 
[5] [Feb 06 07:17:00:449] bootmode BKSTD
[5] [Feb 06 07:17:00:449] ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[5] [Feb 06 07:17:00:449] Resolved sequence of products (06.02.2014 07:17:00): 
[1] [Feb 06 07:17:01:066] [flashactivex] 
[1] [Feb 06 07:17:01:066] [flashactivex] ============ Version 4.11.3.6 WIN32 script "p:\flashactivex\Install.ins"
[1] [Feb 06 07:17:01:066] [flashactivex]              start: 2014-02-06  07:17:01 
[1] [Feb 06 07:17:01:066] [flashactivex]              installing product: flashactivex_12.0.0.44-0
[1] [Feb 06 07:17:01:066] [flashactivex]              on client named    "clientname.local"
[1] [Feb 06 07:17:01:066] [flashactivex]              loggedin user    ""
[1] [Feb 06 07:17:01:066] [flashactivex]              winst running as    "SYSTEM"
[1] [Feb 06 07:17:01:066] [flashactivex]              winst running with admin privileges
[1] [Feb 06 07:17:01:066] [flashactivex]              winst running in standard script mode
[1] [Feb 06 07:17:01:066] [flashactivex] executing: "C:\Program Files (x86)\opsi.org\opsi-client-agent\opsi-winst\winst32.exe"
[1] [Feb 06 07:17:01:066] [flashactivex] system infos:
[1] [Feb 06 07:17:01:070] [flashactivex] 8C-89-A5-21-95-F6  -  PC hardware address
[1]......
[1] [Feb 06 07:19:11:732] [java] 
[6] [Feb 06 07:19:11:732] [java] Delete "c:\opsi.org\tmp\_winstbat_*"
[6] [Feb 06 07:19:11:732] [java]   Search "c:\opsi.org\tmp\"
[6] [Feb 06 07:19:11:732] [java] JSON service request https://192.168.1.96:4447/rpc setProductActionRequest
[6] [Feb 06 07:19:11:841] [java] JSON Bench for setProductActionRequest "params":["java","clientname.local","update" Start: 07:19:11:732 Time: 00:00:00:109
[1] [Feb 06 07:19:11:844] [java] product "java set to update
[1] [Feb 06 07:19:11:844] [java] Update script name: 
[5] [Feb 06 07:19:11:844] [java] no script file name given
[1] [Feb 06 07:19:11:844] [java] we have no update script
[6] [Feb 06 07:19:11:845] [java] JSON service request https://192.168.1.96:4447/rpc productOnClient_updateObject
[6] [Feb 06 07:19:11:919] [java] JSON Bench for productOnClient_updateObject "params":[{"clientId":"clientname.local","ac Start: 07:19:11:844 Time: 00:00:00:075
[6] [Feb 06 07:19:11:923] Registry key [HKLM\SOFTWARE\opsi.org\winst]  opened
[6] [Feb 06 07:19:11:923]                 Variable "RebootRequested"  is keeping its value "0"
[6] [Feb 06 07:19:11:923]                 Variable "LastLogFilename"  had value  "c:\tmp\opsi-client-agent.log"
[6] [Feb 06 07:19:11:923]                 Info:    "LastLogFilename"  changed to "c:\tmp\instlog.txt"
[6] [Feb 06 07:19:11:923]                 Variable "ContinueLogFile"  is keeping its value "0"
[6] [Feb 06 07:19:11:923]                 Variable "NumberOfErrors"  not found. Code: 2
[6] [Feb 06 07:19:20:327]                 Key flushed
[6] [Feb 06 07:19:20:327]                 Key closed
[5] [Feb 06 07:19:20:330] -------- submitted part of log file ends here, see the rest of log file on client ----------
[5] [Feb 06 07:19:20:330] read file created
[5] [Feb 06 07:19:20:330] read file opend
[5] [Feb 06 07:19:20:330] start reading read file ...
[5] [Feb 06 07:19:20:335] start sending read file ...
[6] [Feb 06 07:19:21:271] JSON service request https://192.168.1.96:4447/rpc backend_exit
[6] [Feb 06 07:19:21:324] JSON Bench for backend_exit "params":[],"id":1} Start: 07:19:21:271 Time: 00:00:00:053
[1] [Feb 06 07:19:21:327] ============  opsi-winst Version 4.11.3.6 WIN32 is regularly exiting. Time 2014-02-06  07:19:21 .

Ah in der loginblocker.log stehen noch fehler gelistet:

Code: Alles auswählen

2014-01-31 15:46:29 [6] Registry value LoginBlockerLogLevel read, result 6

2014-01-31 15:46:29 [5] LoginBlockerLogLevel is: 6

2014-01-31 15:46:29 [6] Registry value LoginBlockerTimeoutConnect read, result 120

2014-01-31 15:46:29 [5] LoginBlockerTimeoutConnect is: 120

2014-01-31 15:46:29 [5] Communicating with service through pipe

2014-01-31 15:46:29 [6] Creating file: \\.\pipe\opsiclientd

2014-01-31 15:46:29 [3] Could not open pipe \\.\pipe\opsiclientd: 2

2014-01-31 15:46:39 [6] Creating file: \\.\pipe\opsiclientd

2014-01-31 15:46:39 [3] Could not open pipe \\.\pipe\opsiclientd: 2

2014-01-31 15:46:49 [6] Creating file: \\.\pipe\opsiclientd

2014-01-31 15:46:49 [3] Could not open pipe \\.\pipe\opsiclientd: 2

2014-01-31 15:46:59 [6] Creating file: \\.\pipe\opsiclientd

2014-01-31 15:46:59 [3] Could not open pipe \\.\pipe\opsiclientd: 2

2014-01-31 15:47:09 [6] Creating file: \\.\pipe\opsiclientd

2014-01-31 15:47:09 [3] Could not open pipe \\.\pipe\opsiclientd: 2

2014-01-31 15:47:19 [6] Creating file: \\.\pipe\opsiclientd

2014-01-31 15:47:19 [3] Could not open pipe \\.\pipe\opsiclientd: 2

2014-01-31 15:47:29 [6] Creating file: \\.\pipe\opsiclientd

2014-01-31 15:47:29 [3] Could not open pipe \\.\pipe\opsiclientd: 2

2014-01-31 15:47:39 [6] Creating file: \\.\pipe\opsiclientd

2014-01-31 15:47:39 [3] Could not open pipe \\.\pipe\opsiclientd: 2

2014-01-31 15:47:49 [6] Creating file: \\.\pipe\opsiclientd

2014-01-31 15:47:49 [3] Could not open pipe \\.\pipe\opsiclientd: 2

2014-01-31 15:47:59 [6] Creating file: \\.\pipe\opsiclientd

2014-01-31 15:47:59 [3] Could not open pipe \\.\pipe\opsiclientd: 2

2014-01-31 15:48:09 [6] Creating file: \\.\pipe\opsiclientd

2014-01-31 15:48:09 [3] Could not open pipe \\.\pipe\opsiclientd: 2

2014-01-31 15:48:19 [6] Creating file: \\.\pipe\opsiclientd

2014-01-31 15:48:19 [3] Could not open pipe \\.\pipe\opsiclientd: 2

2014-01-31 15:48:28 [6] Creating file: \\.\pipe\opsiclientd

2014-01-31 15:48:28 [3] Could not open pipe \\.\pipe\opsiclientd: 2

2014-01-31 15:48:28 [3] Could not open pipe (timed out)

2014-01-31 15:48:28 [3] Service request '{"id": 1, "method": "getBlockLogin", "params": []}' failed

2014-02-03 07:26:21 [6] Registry value LoginBlockerLogLevel read, result 6

2014-02-03 07:26:21 [5] LoginBlockerLogLevel is: 6

2014-02-03 07:26:21 [6] Registry value LoginBlockerTimeoutConnect read, result 120

2014-02-03 07:26:21 [5] LoginBlockerTimeoutConnect is: 120

2014-02-03 07:26:21 [5] Communicating with service through pipe

2014-02-03 07:26:21 [6] Creating file: \\.\pipe\opsiclientd

2014-02-03 07:26:21 [6] Pipe successfully opened

2014-02-03 07:26:21 [5] Writing '{"id": 1, "method": "getBlockLogin", "params": []}' to pipe

2014-02-03 07:26:21 [6] Reading from pipe

2014-02-03 07:26:21 [5] Read '{"error": null, "result": false, "id": 1}' from pipe

2014-02-03 07:26:21 [6] getJsonValue() value of 'error' is 'null'

2014-02-03 07:26:21 [6] getJsonValue() value of 'result' is 'false'

2014-02-03 07:26:21 [5] Not blocking!

2014-02-03 09:09:56 [6] Registry value LoginBlockerLogLevel read, result 6

2014-02-03 09:09:56 [5] LoginBlockerLogLevel is: 6

2014-02-03 09:09:56 [6] Registry value LoginBlockerTimeoutConnect read, result 120

2014-02-03 09:09:56 [5] LoginBlockerTimeoutConnect is: 120

2014-02-03 09:09:56 [5] Communicating with service through pipe

2014-02-03 09:09:56 [6] Creating file: \\.\pipe\opsiclientd

2014-02-03 09:09:56 [6] Pipe successfully opened

2014-02-03 09:09:56 [5] Writing '{"id": 1, "method": "getBlockLogin", "params": []}' to pipe

2014-02-03 09:09:56 [6] Reading from pipe

2014-02-03 09:09:56 [5] Read '{"error": null, "result": false, "id": 1}' from pipe

2014-02-03 09:09:56 [6] getJsonValue() value of 'error' is 'null'

2014-02-03 09:09:56 [6] getJsonValue() value of 'result' is 'false'

2014-02-03 09:09:56 [5] Not blocking!

2014-02-03 09:45:45 [6] Registry value LoginBlockerLogLevel read, result 6

2014-02-03 09:45:45 [5] LoginBlockerLogLevel is: 6

2014-02-03 09:45:45 [6] Registry value LoginBlockerTimeoutConnect read, result 120

2014-02-03 09:45:45 [5] LoginBlockerTimeoutConnect is: 120

2014-02-03 09:45:45 [5] Communicating with service through pipe

2014-02-03 09:45:45 [6] Creating file: \\.\pipe\opsiclientd

2014-02-03 09:45:45 [6] Pipe successfully opened

2014-02-03 09:45:45 [5] Writing '{"id": 1, "method": "getBlockLogin", "params": []}' to pipe

2014-02-03 09:45:45 [6] Reading from pipe

2014-02-03 09:45:45 [5] Read '{"error": null, "result": false, "id": 1}' from pipe

2014-02-03 09:45:45 [6] getJsonValue() value of 'error' is 'null'

2014-02-03 09:45:45 [6] getJsonValue() value of 'result' is 'false'

2014-02-03 09:45:45 [5] Not blocking!

2014-02-03 10:00:18 [6] Registry value LoginBlockerLogLevel read, result 6

2014-02-03 10:00:18 [5] LoginBlockerLogLevel is: 6

2014-02-03 10:00:18 [6] Registry value LoginBlockerTimeoutConnect read, result 120

2014-02-03 10:00:18 [5] LoginBlockerTimeoutConnect is: 120

2014-02-03 10:00:18 [5] Communicating with service through pipe

2014-02-03 10:00:18 [6] Creating file: \\.\pipe\opsiclientd

2014-02-03 10:00:18 [6] Pipe successfully opened

2014-02-03 10:00:18 [5] Writing '{"id": 1, "method": "getBlockLogin", "params": []}' to pipe

2014-02-03 10:00:18 [6] Reading from pipe

2014-02-03 10:00:18 [5] Read '{"error": null, "result": false, "id": 1}' from pipe

2014-02-03 10:00:18 [6] getJsonValue() value of 'error' is 'null'

2014-02-03 10:00:18 [6] getJsonValue() value of 'result' is 'false'

2014-02-03 10:00:18 [5] Not blocking!

2014-02-03 10:08:59 [6] Registry value LoginBlockerLogLevel read, result 6

2014-02-03 10:08:59 [5] LoginBlockerLogLevel is: 6

2014-02-03 10:08:59 [6] Registry value LoginBlockerTimeoutConnect read, result 120

2014-02-03 10:08:59 [5] LoginBlockerTimeoutConnect is: 120

2014-02-03 10:08:59 [5] Communicating with service through pipe

2014-02-03 10:08:59 [6] Creating file: \\.\pipe\opsiclientd

2014-02-03 10:08:59 [6] Pipe successfully opened

2014-02-03 10:08:59 [5] Writing '{"id": 1, "method": "getBlockLogin", "params": []}' to pipe

2014-02-03 10:08:59 [6] Reading from pipe

2014-02-03 10:08:59 [5] Read '{"error": null, "result": false, "id": 1}' from pipe

2014-02-03 10:08:59 [6] getJsonValue() value of 'error' is 'null'

2014-02-03 10:08:59 [6] getJsonValue() value of 'result' is 'false'

2014-02-03 10:08:59 [5] Not blocking!

2014-02-03 10:16:52 [6] Registry value LoginBlockerLogLevel read, result 6

2014-02-03 10:16:52 [5] LoginBlockerLogLevel is: 6

2014-02-03 10:16:52 [6] Registry value LoginBlockerTimeoutConnect read, result 120

2014-02-03 10:16:52 [5] LoginBlockerTimeoutConnect is: 120

2014-02-03 10:16:52 [5] Communicating with service through pipe

2014-02-03 10:16:52 [6] Creating file: \\.\pipe\opsiclientd

2014-02-03 10:16:52 [6] Pipe successfully opened

2014-02-03 10:16:52 [5] Writing '{"id": 1, "method": "getBlockLogin", "params": []}' to pipe

2014-02-03 10:16:52 [6] Reading from pipe

2014-02-03 10:16:52 [5] Read '{"error": null, "result": false, "id": 1}' from pipe

2014-02-03 10:16:52 [6] getJsonValue() value of 'error' is 'null'

2014-02-03 10:16:52 [6] getJsonValue() value of 'result' is 'false'

2014-02-03 10:16:52 [5] Not blocking!

2014-02-03 11:20:46 [6] Registry value LoginBlockerLogLevel read, result 6

2014-02-03 11:20:46 [5] LoginBlockerLogLevel is: 6

2014-02-03 11:20:46 [6] Registry value LoginBlockerTimeoutConnect read, result 120

2014-02-03 11:20:46 [5] LoginBlockerTimeoutConnect is: 120

2014-02-03 11:20:46 [5] Communicating with service through pipe

2014-02-03 11:20:46 [6] Creating file: \\.\pipe\opsiclientd

2014-02-03 11:20:46 [6] Pipe successfully opened

2014-02-03 11:20:46 [5] Writing '{"id": 1, "method": "getBlockLogin", "params": []}' to pipe

2014-02-03 11:20:46 [6] Reading from pipe

2014-02-03 11:20:46 [5] Read '{"error": null, "result": false, "id": 1}' from pipe

2014-02-03 11:20:46 [6] getJsonValue() value of 'error' is 'null'

2014-02-03 11:20:46 [6] getJsonValue() value of 'result' is 'false'

2014-02-03 11:20:46 [5] Not blocking!

2014-02-03 11:44:45 [6] Registry value LoginBlockerLogLevel read, result 6

2014-02-03 11:44:45 [5] LoginBlockerLogLevel is: 6

2014-02-03 11:44:45 [6] Registry value LoginBlockerTimeoutConnect read, result 120

2014-02-03 11:44:45 [5] LoginBlockerTimeoutConnect is: 120

2014-02-03 11:44:45 [5] Communicating with service through pipe

2014-02-03 11:44:45 [6] Creating file: \\.\pipe\opsiclientd

2014-02-03 11:44:45 [6] Pipe successfully opened

2014-02-03 11:44:45 [5] Writing '{"id": 1, "method": "getBlockLogin", "params": []}' to pipe

2014-02-03 11:44:45 [6] Reading from pipe

2014-02-03 11:44:45 [5] Read '{"error": null, "result": false, "id": 1}' from pipe

2014-02-03 11:44:45 [6] getJsonValue() value of 'error' is 'null'

2014-02-03 11:44:45 [6] getJsonValue() value of 'result' is 'false'

2014-02-03 11:44:45 [5] Not blocking!

2014-02-03 12:44:23 [6] Registry value LoginBlockerLogLevel read, result 6

2014-02-03 12:44:23 [5] LoginBlockerLogLevel is: 6

2014-02-03 12:44:23 [6] Registry value LoginBlockerTimeoutConnect read, result 120

2014-02-03 12:44:23 [5] LoginBlockerTimeoutConnect is: 120

2014-02-03 12:44:23 [5] Communicating with service through pipe

2014-02-03 12:44:23 [6] Creating file: \\.\pipe\opsiclientd

2014-02-03 12:44:23 [6] Pipe successfully opened

2014-02-03 12:44:23 [5] Writing '{"id": 1, "method": "getBlockLogin", "params": []}' to pipe

2014-02-03 12:44:23 [6] Reading from pipe

2014-02-03 12:44:23 [5] Read '{"error": null, "result": false, "id": 1}' from pipe

2014-02-03 12:44:23 [6] getJsonValue() value of 'error' is 'null'

2014-02-03 12:44:23 [6] getJsonValue() value of 'result' is 'false'

2014-02-03 12:44:23 [5] Not blocking!

2014-02-03 13:32:48 [6] Registry value LoginBlockerLogLevel read, result 6

2014-02-03 13:32:48 [5] LoginBlockerLogLevel is: 6

2014-02-03 13:32:48 [6] Registry value LoginBlockerTimeoutConnect read, result 120

2014-02-03 13:32:48 [5] LoginBlockerTimeoutConnect is: 120

2014-02-03 13:32:48 [5] Communicating with service through pipe

2014-02-03 13:32:48 [6] Creating file: \\.\pipe\opsiclientd

2014-02-03 13:32:48 [6] Pipe successfully opened

2014-02-03 13:32:48 [5] Writing '{"id": 1, "method": "getBlockLogin", "params": []}' to pipe

2014-02-03 13:32:48 [6] Reading from pipe

2014-02-03 13:32:48 [5] Read '{"error": null, "result": false, "id": 1}' from pipe

2014-02-03 13:32:48 [6] getJsonValue() value of 'error' is 'null'

2014-02-03 13:32:48 [6] getJsonValue() value of 'result' is 'false'

2014-02-03 13:32:48 [5] Not blocking!

2014-02-03 13:44:15 [6] Registry value LoginBlockerLogLevel read, result 6

2014-02-03 13:44:15 [5] LoginBlockerLogLevel is: 6

2014-02-03 13:44:15 [6] Registry value LoginBlockerTimeoutConnect read, result 120

2014-02-03 13:44:15 [5] LoginBlockerTimeoutConnect is: 120

2014-02-03 13:44:15 [5] Communicating with service through pipe

2014-02-03 13:44:15 [6] Creating file: \\.\pipe\opsiclientd

2014-02-03 13:44:15 [6] Pipe successfully opened

2014-02-03 13:44:15 [5] Writing '{"id": 1, "method": "getBlockLogin", "params": []}' to pipe

2014-02-03 13:44:15 [6] Reading from pipe

2014-02-03 13:44:15 [5] Read '{"error": null, "result": false, "id": 1}' from pipe

2014-02-03 13:44:15 [6] getJsonValue() value of 'error' is 'null'

2014-02-03 13:44:15 [6] getJsonValue() value of 'result' is 'false'

2014-02-03 13:44:15 [5] Not blocking!

2014-02-03 14:29:45 [6] Registry value LoginBlockerLogLevel read, result 6

2014-02-03 14:29:45 [5] LoginBlockerLogLevel is: 6

2014-02-03 14:29:45 [6] Registry value LoginBlockerTimeoutConnect read, result 120

2014-02-03 14:29:45 [5] LoginBlockerTimeoutConnect is: 120

2014-02-03 14:29:45 [5] Communicating with service through pipe

2014-02-03 14:29:45 [6] Creating file: \\.\pipe\opsiclientd

2014-02-03 14:29:45 [6] Pipe successfully opened

2014-02-03 14:29:45 [5] Writing '{"id": 1, "method": "getBlockLogin", "params": []}' to pipe

2014-02-03 14:29:45 [6] Reading from pipe

2014-02-03 14:29:45 [5] Read '{"error": null, "result": false, "id": 1}' from pipe

2014-02-03 14:29:45 [6] getJsonValue() value of 'error' is 'null'

2014-02-03 14:29:45 [6] getJsonValue() value of 'result' is 'false'

2014-02-03 14:29:45 [5] Not blocking!

2014-02-03 15:25:17 [6] Registry value LoginBlockerLogLevel read, result 6

2014-02-03 15:25:17 [5] LoginBlockerLogLevel is: 6

2014-02-03 15:25:17 [6] Registry value LoginBlockerTimeoutConnect read, result 120

2014-02-03 15:25:17 [5] LoginBlockerTimeoutConnect is: 120

2014-02-03 15:25:17 [5] Communicating with service through pipe

2014-02-03 15:25:17 [6] Creating file: \\.\pipe\opsiclientd

2014-02-03 15:25:17 [6] Pipe successfully opened

2014-02-03 15:25:17 [5] Writing '{"id": 1, "method": "getBlockLogin", "params": []}' to pipe

2014-02-03 15:25:17 [6] Reading from pipe

2014-02-03 15:25:17 [5] Read '{"error": null, "result": false, "id": 1}' from pipe

2014-02-03 15:25:17 [6] getJsonValue() value of 'error' is 'null'

2014-02-03 15:25:17 [6] getJsonValue() value of 'result' is 'false'

2014-02-03 15:25:17 [5] Not blocking!

2014-02-05 09:10:12 [6] Registry value LoginBlockerLogLevel read, result 6

2014-02-05 09:10:12 [5] LoginBlockerLogLevel is: 6

2014-02-05 09:10:12 [6] Registry value LoginBlockerTimeoutConnect read, result 120

2014-02-05 09:10:12 [5] LoginBlockerTimeoutConnect is: 120

2014-02-05 09:10:12 [5] Communicating with service through pipe

2014-02-05 09:10:12 [6] Creating file: \\.\pipe\opsiclientd

2014-02-05 09:10:12 [6] Pipe successfully opened

2014-02-05 09:10:12 [5] Writing '{"id": 1, "method": "getBlockLogin", "params": []}' to pipe

2014-02-05 09:10:12 [6] Reading from pipe

2014-02-05 09:10:12 [5] Read '{"error": null, "result": false, "id": 1}' from pipe

2014-02-05 09:10:12 [6] getJsonValue() value of 'error' is 'null'

2014-02-05 09:10:12 [6] getJsonValue() value of 'result' is 'false'

2014-02-05 09:10:12 [5] Not blocking!

2014-02-05 09:51:35 [6] Registry value LoginBlockerLogLevel read, result 6

2014-02-05 09:51:35 [5] LoginBlockerLogLevel is: 6

2014-02-05 09:51:35 [6] Registry value LoginBlockerTimeoutConnect read, result 120

2014-02-05 09:51:35 [5] LoginBlockerTimeoutConnect is: 120

2014-02-05 09:51:35 [5] Communicating with service through pipe

2014-02-05 09:51:35 [6] Creating file: \\.\pipe\opsiclientd

2014-02-05 09:51:35 [6] Pipe successfully opened

2014-02-05 09:51:35 [5] Writing '{"id": 1, "method": "getBlockLogin", "params": []}' to pipe

2014-02-05 09:51:35 [6] Reading from pipe

2014-02-05 09:51:35 [5] Read '{"error": null, "result": false, "id": 1}' from pipe

2014-02-05 09:51:35 [6] getJsonValue() value of 'error' is 'null'

2014-02-05 09:51:35 [6] getJsonValue() value of 'result' is 'false'

2014-02-05 09:51:35 [5] Not blocking!

2014-02-05 11:11:30 [6] Registry value LoginBlockerLogLevel read, result 6

2014-02-05 11:11:30 [5] LoginBlockerLogLevel is: 6

2014-02-05 11:11:30 [6] Registry value LoginBlockerTimeoutConnect read, result 120

2014-02-05 11:11:30 [5] LoginBlockerTimeoutConnect is: 120

2014-02-05 11:11:30 [5] Communicating with service through pipe

2014-02-05 11:11:30 [6] Creating file: \\.\pipe\opsiclientd

2014-02-05 11:11:30 [6] Pipe successfully opened

2014-02-05 11:11:30 [5] Writing '{"id": 1, "method": "getBlockLogin", "params": []}' to pipe

2014-02-05 11:11:30 [6] Reading from pipe

2014-02-05 11:11:30 [5] Read '{"error": null, "result": false, "id": 1}' from pipe

2014-02-05 11:11:30 [6] getJsonValue() value of 'error' is 'null'

2014-02-05 11:11:30 [6] getJsonValue() value of 'result' is 'false'

2014-02-05 11:11:30 [5] Not blocking!

2014-02-05 12:46:45 [6] Registry value LoginBlockerLogLevel read, result 6

2014-02-05 12:46:45 [5] LoginBlockerLogLevel is: 6

2014-02-05 12:46:45 [6] Registry value LoginBlockerTimeoutConnect read, result 120

2014-02-05 12:46:45 [5] LoginBlockerTimeoutConnect is: 120

2014-02-05 12:46:45 [5] Communicating with service through pipe

2014-02-05 12:46:45 [6] Creating file: \\.\pipe\opsiclientd

2014-02-05 12:46:45 [6] Pipe successfully opened

2014-02-05 12:46:45 [5] Writing '{"id": 1, "method": "getBlockLogin", "params": []}' to pipe

2014-02-05 12:46:45 [6] Reading from pipe

2014-02-05 12:46:45 [5] Read '{"error": null, "result": false, "id": 1}' from pipe

2014-02-05 12:46:45 [6] getJsonValue() value of 'error' is 'null'

2014-02-05 12:46:45 [6] getJsonValue() value of 'result' is 'false'

2014-02-05 12:46:45 [5] Not blocking!

2014-02-05 13:46:35 [6] Registry value LoginBlockerLogLevel read, result 6

2014-02-05 13:46:35 [5] LoginBlockerLogLevel is: 6

2014-02-05 13:46:35 [6] Registry value LoginBlockerTimeoutConnect read, result 120

2014-02-05 13:46:35 [5] LoginBlockerTimeoutConnect is: 120

2014-02-05 13:46:35 [5] Communicating with service through pipe

2014-02-05 13:46:35 [6] Creating file: \\.\pipe\opsiclientd

2014-02-05 13:46:35 [6] Pipe successfully opened

2014-02-05 13:46:35 [5] Writing '{"id": 1, "method": "getBlockLogin", "params": []}' to pipe

2014-02-05 13:46:35 [6] Reading from pipe

2014-02-05 13:46:35 [5] Read '{"error": null, "result": false, "id": 1}' from pipe

2014-02-05 13:46:35 [6] getJsonValue() value of 'error' is 'null'

2014-02-05 13:46:35 [6] getJsonValue() value of 'result' is 'false'

2014-02-05 13:46:35 [5] Not blocking!

2014-02-05 15:52:42 [6] Registry value LoginBlockerLogLevel read, result 6

2014-02-05 15:52:42 [5] LoginBlockerLogLevel is: 6

2014-02-05 15:52:42 [6] Registry value LoginBlockerTimeoutConnect read, result 120

2014-02-05 15:52:42 [5] LoginBlockerTimeoutConnect is: 120

2014-02-05 15:52:42 [5] Communicating with service through pipe

2014-02-05 15:52:42 [6] Creating file: \\.\pipe\opsiclientd

2014-02-05 15:52:42 [6] Pipe successfully opened

2014-02-05 15:52:42 [5] Writing '{"id": 1, "method": "getBlockLogin", "params": []}' to pipe

2014-02-05 15:52:42 [6] Reading from pipe

2014-02-05 15:52:42 [5] Read '{"error": null, "result": false, "id": 1}' from pipe

2014-02-05 15:52:42 [6] getJsonValue() value of 'error' is 'null'

2014-02-05 15:52:42 [6] getJsonValue() value of 'result' is 'false'

2014-02-05 15:52:42 [5] Not blocking!

2014-02-05 16:38:21 [6] Registry value LoginBlockerLogLevel read, result 6

2014-02-05 16:38:21 [5] LoginBlockerLogLevel is: 6

2014-02-05 16:38:21 [6] Registry value LoginBlockerTimeoutConnect read, result 120

2014-02-05 16:38:21 [5] LoginBlockerTimeoutConnect is: 120

2014-02-05 16:38:21 [5] Communicating with service through pipe

2014-02-05 16:38:21 [6] Creating file: \\.\pipe\opsiclientd

2014-02-05 16:38:21 [6] Pipe successfully opened

2014-02-05 16:38:21 [5] Writing '{"id": 1, "method": "getBlockLogin", "params": []}' to pipe

2014-02-05 16:38:21 [6] Reading from pipe

2014-02-05 16:38:21 [5] Read '{"error": null, "result": false, "id": 1}' from pipe

2014-02-05 16:38:21 [6] getJsonValue() value of 'error' is 'null'

2014-02-05 16:38:21 [6] getJsonValue() value of 'result' is 'false'

2014-02-05 16:38:21 [5] Not blocking!

2014-02-06 07:16:26 [6] Registry value LoginBlockerLogLevel read, result 6

2014-02-06 07:16:26 [5] LoginBlockerLogLevel is: 6

2014-02-06 07:16:26 [6] Registry value LoginBlockerTimeoutConnect read, result 120

2014-02-06 07:16:26 [5] LoginBlockerTimeoutConnect is: 120

2014-02-06 07:16:26 [5] Communicating with service through pipe

2014-02-06 07:16:26 [6] Creating file: \\.\pipe\opsiclientd

2014-02-06 07:16:26 [3] Could not open pipe \\.\pipe\opsiclientd: 2

2014-02-06 07:16:36 [6] Creating file: \\.\pipe\opsiclientd

2014-02-06 07:16:36 [3] Could not open pipe \\.\pipe\opsiclientd: 2

2014-02-06 07:16:46 [6] Creating file: \\.\pipe\opsiclientd

2014-02-06 07:16:46 [6] Pipe successfully opened

2014-02-06 07:16:46 [5] Writing '{"id": 1, "method": "getBlockLogin", "params": []}' to pipe

2014-02-06 07:16:46 [6] Reading from pipe

2014-02-06 07:16:46 [5] Read '{"error": null, "result": true, "id": 1}' from pipe

2014-02-06 07:16:46 [6] getJsonValue() value of 'error' is 'null'

2014-02-06 07:16:46 [6] getJsonValue() value of 'result' is 'true'

2014-02-06 07:16:46 [5] Blocking!

2014-02-06 07:16:49 [5] Communicating with service through pipe

2014-02-06 07:16:49 [6] Creating file: \\.\pipe\opsiclientd

2014-02-06 07:16:49 [6] Pipe successfully opened

2014-02-06 07:16:49 [5] Writing '{"id": 1, "method": "getBlockLogin", "params": []}' to pipe

2014-02-06 07:16:49 [6] Reading from pipe

2014-02-06 07:16:49 [5] Read '{"error": null, "result": true, "id": 1}' from pipe

2014-02-06 07:16:49 [6] getJsonValue() value of 'error' is 'null'

2014-02-06 07:16:49 [6] getJsonValue() value of 'result' is 'true'

2014-02-06 07:16:49 [5] Blocking!

2014-02-06 07:16:52 [5] Communicating with service through pipe

2014-02-06 07:16:52 [6] Creating file: \\.\pipe\opsiclientd

2014-02-06 07:16:52 [6] Pipe successfully opened

2014-02-06 07:16:52 [5] Writing '{"id": 1, "method": "getBlockLogin", "params": []}' to pipe

2014-02-06 07:16:52 [6] Reading from pipe

2014-02-06 07:16:52 [5] Read '{"error": null, "result": true, "id": 1}' from pipe

2014-02-06 07:18:01 [6] Creating file: \\.\pipe\opsiclientd

2014-02-06 07:18:01 [6] Pipe successfully opened

2014-02-06 07:18:01 [5] Writing '{"id": 1, "method": "getBlockLogin", "params": []}' to pipe

2014-02-06 07:18:01 [6] Reading from pipe

2014-02-06 07:18:01 [5] Read '{"error": null, "result": true, "id": 1}' from pipe

2014-02-06 07:18:01 [6] getJsonValue() value of 'error' is 'null'

2014-02-06 07:18:01 [6] getJsonValue() value of 'result' is 'true'

2014-02-06 07:18:01 [5] Blocking!

2014-02-06 07:18:04 [5] Communicating with service through pipe

2014-02-06 07:18:04 [6] Creating file: \\.\pipe\opsiclientd

2014-02-06 07:18:04 [6] Pipe successfully opened

2014-02-06 07:18:04 [5] Writing '{"id": 1, "method": "getBlockLogin", "params": []}' to pipe

2014-02-06 07:18:04 [6] Reading from pipe

2014-02-06 07:18:04 [5] Read '{"error": null, "result": true, "id": 1}' from pipe

2014-02-06 07:18:04 [6] getJsonValue() value of 'error' is 'null'

2014-02-06 07:18:04 [6] getJsonValue() value of 'result' is 'true'

2014-02-06 07:18:04 [5] Blocking!

2014-02-06 07:18:07 [5] Communicating with service through pipe

2014-02-06 07:18:07 [6] Creating file: \\.\pipe\opsiclientd

2014-02-06 07:18:07 [6] Pipe successfully opened

2014-02-06 07:18:07 [5] Writing '{"id": 1, "method": "getBlockLogin", "params": []}' to pipe

2014-02-06 07:18:07 [6] Reading from pipe

2014-02-06 07:18:07 [5] Read '{"error": null, "result": true, "id": 1}' from pipe

2014-02-06 07:18:07 [6] getJsonValue() value of 'error' is 'null'

2014-02-06 07:18:07 [6] getJsonValue() value of 'result' is 'true'

2014-02-06 07:18:07 [5] Blocking!

2014-02-06 07:18:10 [5] Communicating with service through pipe

2014-02-06 07:18:10 [6] Creating file: \\.\pipe\opsiclientd

2014-02-06 07:18:10 [6] Pipe successfully opened

2014-02-06 07:18:10 [5] Writing '{"id": 1, "method": "getBlockLogin", "params": []}' to pipe

2014-02-06 07:18:10 [6] Reading from pipe

2014-02-06 07:18:10 [5] Read '{"error": null, "result": true, "id": 1}' from pipe

2014-02-06 07:18:10 [6] getJsonValue() value of 'error' is 'null'

2014-02-06 07:18:10 [6] getJsonValue() value of 'result' is 'true'

2014-02-06 07:18:10 [5] Blocking!

2014-02-06 07:18:13 [5] Communicating with service through pipe

2014-02-06 07:18:13 [6] Creating file: \\.\pipe\opsiclientd

2014-02-06 07:18:13 [6] Pipe successfully opened

2014-02-06 07:18:13 [5] Writing '{"id": 1, "method": "getBlockLogin", "params": []}' to pipe

2014-02-06 07:18:13 [6] Reading from pipe

2014-02-06 07:18:13 [5] Read '{"error": null, "result": true, "id": 1}' from pipe

2014-02-06 07:18:13 [6] getJsonValue() value of 'error' is 'null'

2014-02-06 07:18:13 [6] getJsonValue() value of 'result' is 'true'

2014-02-06 07:18:13 [5] Blocking!

2014-02-06 07:18:16 [5] Communicating with service through pipe

2014-02-06 07:18:16 [6] Creating file: \\.\pipe\opsiclientd

2014-02-06 07:18:16 [6] Pipe successfully opened

2014-02-06 07:18:16 [5] Writing '{"id": 1, "method": "getBlockLogin", "params": []}' to pipe

2014-02-06 07:18:16 [6] Reading from pipe

2014-02-06 07:18:16 [5] Read '{"error": null, "result": true, "id": 1}' from pipe

2014-02-06 07:18:16 [6] getJsonValue() value of 'error' is 'null'

2014-02-06 07:18:16 [6] getJsonValue() value of 'result' is 'true'

2014-02-06 07:18:16 [5] Blocking!

2014-02-06 07:18:19 [5] Communicating with service through pipe

2014-02-06 07:18:19 [6] Creating file: \\.\pipe\opsiclientd

2014-02-06 07:18:19 [6] Pipe successfully opened

2014-02-06 07:18:19 [5] Writing '{"id": 1, "method": "getBlockLogin", "params": []}' to pipe

2014-02-06 07:18:19 [6] Reading from pipe

2014-02-06 07:18:19 [5] Read '{"error": null, "result": true, "id": 1}' from pipe

2014-02-06 07:18:19 [6] getJsonValue() value of 'error' is 'null'

2014-02-06 07:18:19 [6] getJsonValue() value of 'result' is 'true'

2014-02-06 07:18:19 [5] Blocking!

2014-02-06 07:18:22 [5] Communicating with service through pipe

2014-02-06 07:18:22 [6] Creating file: \\.\pipe\opsiclientd

2014-02-06 07:18:22 [6] Pipe successfully opened

2014-02-06 07:18:22 [5] Writing '{"id": 1, "method": "getBlockLogin", "params": []}' to pipe

2014-02-06 07:18:22 [6] Reading from pipe

2014-02-06 07:18:22 [5] Read '{"error": null, "result": true, "id": 1}' from pipe

2014-02-06 07:18:22 [6] getJsonValue() value of 'error' is 'null'

2014-02-06 07:18:22 [6] getJsonValue() value of 'result' is 'true'

2014-02-06 07:18:22 [5] Blocking!

2014-02-06 07:18:25 [5] Communicating with service through pipe

2014-02-06 07:18:26 [6] Creating file: \\.\pipe\opsiclientd

2014-02-06 07:18:26 [6] Pipe successfully opened

2014-02-06 07:18:26 [5] Writing '{"id": 1, "method": "getBlockLogin", "params": []}' to pipe

2014-02-06 07:18:26 [6] Reading from pipe

2014-02-06 07:18:26 [5] Read '{"error": null, "result": true, "id": 1}' from pipe

2014-02-06 07:18:26 [6] getJsonValue() value of 'error' is 'null'

2014-02-06 07:18:26 [6] getJsonValue() value of 'result' is 'true'

2014-02-06 07:18:26 [5] Blocking!

2014-02-06 07:18:29 [5] Communicating with service through pipe

2014-02-06 07:18:29 [6] Creating file: \\.\pipe\opsiclientd

2014-02-06 07:18:29 [6] Pipe successfully opened

2014-02-06 07:18:29 [5] Writing '{"id": 1, "method": "getBlockLogin", "params": []}' to pipe

2014-02-06 07:18:29 [6] Reading from pipe

2014-02-06 07:18:29 [5] Read '{"error": null, "result": true, "id": 1}' from pipe

2014-02-06 07:18:29 [6] getJsonValue() value of 'error' is 'null'

2014-02-06 07:18:29 [6] getJsonValue() value of 'result' is 'true'

2014-02-06 07:18:29 [5] Blocking!

2014-02-06 07:18:32 [5] Communicating with service through pipe

2014-02-06 07:18:32 [6] Creating file: \\.\pipe\opsiclientd

2014-02-06 07:18:32 [6] Pipe successfully opened

2014-02-06 07:18:32 [5] Writing '{"id": 1, "method": "getBlockLogin", "params": []}' to pipe

2014-02-06 07:18:32 [6] Reading from pipe

2014-02-06 07:18:32 [5] Read '{"error": null, "result": true, "id": 1}' from pipe

2014-02-06 07:18:32 [6] getJsonValue() value of 'error' is 'null'

2014-02-06 07:18:32 [6] getJsonValue() value of 'result' is 'true'

2014-02-06 07:18:32 [5] Blocking!

2014-02-06 07:18:35 [5] Communicating with service through pipe

2014-02-06 07:18:36 [6] Creating file: \\.\pipe\opsiclientd

2014-02-06 07:18:36 [6] Pipe successfully opened

2014-02-06 07:18:36 [5] Writing '{"id": 1, "method": "getBlockLogin", "params": []}' to pipe

2014-02-06 07:18:36 [6] Reading from pipe

2014-02-06 07:18:36 [5] Read '{"error": null, "result": true, "id": 1}' from pipe

2014-02-06 07:18:36 [6] getJsonValue() value of 'error' is 'null'

2014-02-06 07:18:36 [6] getJsonValue() value of 'result' is 'true'

2014-02-06 07:18:36 [5] Blocking!

2014-02-06 07:18:39 [5] Communicating with service through pipe

2014-02-06 07:18:39 [6] Creating file: \\.\pipe\opsiclientd

2014-02-06 07:18:39 [6] Pipe successfully opened

2014-02-06 07:18:39 [5] Writing '{"id": 1, "method": "getBlockLogin", "params": []}' to pipe

2014-02-06 07:18:39 [6] Reading from pipe

2014-02-06 07:18:39 [5] Read '{"error": null, "result": true, "id": 1}' from pipe

2014-02-06 07:18:39 [6] getJsonValue() value of 'error' is 'null'

2014-02-06 07:18:39 [6] getJsonValue() value of 'result' is 'true'

2014-02-06 07:18:39 [5] Blocking!

2014-02-06 07:18:42 [5] Communicating with service through pipe

2014-02-06 07:18:42 [6] Creating file: \\.\pipe\opsiclientd

2014-02-06 07:18:42 [6] Pipe successfully opened

2014-02-06 07:18:42 [5] Writing '{"id": 1, "method": "getBlockLogin", "params": []}' to pipe

2014-02-06 07:18:42 [6] Reading from pipe

2014-02-06 07:18:42 [5] Read '{"error": null, "result": true, "id": 1}' from pipe

2014-02-06 07:18:42 [6] getJsonValue() value of 'error' is 'null'

2014-02-06 07:18:42 [6] getJsonValue() value of 'result' is 'true'

2014-02-06 07:18:42 [5] Blocking!

2014-02-06 07:18:45 [5] Communicating with service through pipe

2014-02-06 07:18:45 [6] Creating file: \\.\pipe\opsiclientd

2014-02-06 07:18:45 [6] Pipe successfully opened

2014-02-06 07:18:45 [5] Writing '{"id": 1, "method": "getBlockLogin", "params": []}' to pipe

2014-02-06 07:18:45 [6] Reading from pipe

2014-02-06 07:18:45 [5] Read '{"error": null, "result": true, "id": 1}' from pipe

2014-02-06 07:18:45 [6] getJsonValue() value of 'error' is 'null'

2014-02-06 07:18:45 [6] getJsonValue() value of 'result' is 'true'

2014-02-06 07:18:45 [5] Blocking!

2014-02-06 07:18:48 [5] Communicating with service through pipe

2014-02-06 07:18:48 [6] Creating file: \\.\pipe\opsiclientd

2014-02-06 07:18:48 [6] Pipe successfully opened

2014-02-06 07:18:48 [5] Writing '{"id": 1, "method": "getBlockLogin", "params": []}' to pipe

2014-02-06 07:18:48 [6] Reading from pipe

2014-02-06 07:18:48 [5] Read '{"error": null, "result": true, "id": 1}' from pipe

2014-02-06 07:18:48 [6] getJsonValue() value of 'error' is 'null'

2014-02-06 07:18:48 [6] getJsonValue() value of 'result' is 'true'

2014-02-06 07:18:48 [5] Blocking!

2014-02-06 07:18:51 [5] Communicating with service through pipe

2014-02-06 07:18:51 [6] Creating file: \\.\pipe\opsiclientd

2014-02-06 07:18:51 [6] Pipe successfully opened

2014-02-06 07:18:51 [5] Writing '{"id": 1, "method": "getBlockLogin", "params": []}' to pipe

2014-02-06 07:18:51 [6] Reading from pipe

2014-02-06 07:18:51 [5] Read '{"error": null, "result": true, "id": 1}' from pipe

2014-02-06 07:18:51 [6] getJsonValue() value of 'error' is 'null'

2014-02-06 07:18:51 [6] getJsonValue() value of 'result' is 'true'

2014-02-06 07:18:51 [5] Blocking!

2014-02-06 07:18:54 [5] Communicating with service through pipe

2014-02-06 07:18:54 [6] Creating file: \\.\pipe\opsiclientd

2014-02-06 07:18:54 [6] Pipe successfully opened

2014-02-06 07:18:54 [5] Writing '{"id": 1, "method": "getBlockLogin", "params": []}' to pipe

2014-02-06 07:18:54 [6] Reading from pipe

2014-02-06 07:18:54 [5] Read '{"error": null, "result": true, "id": 1}' from pipe

2014-02-06 07:18:54 [6] getJsonValue() value of 'error' is 'null'

2014-02-06 07:18:54 [6] getJsonValue() value of 'result' is 'true'

2014-02-06 07:18:54 [5] Blocking!

2014-02-06 07:18:57 [5] Communicating with service through pipe

2014-02-06 07:18:57 [6] Creating file: \\.\pipe\opsiclientd

2014-02-06 07:18:57 [6] Pipe successfully opened

2014-02-06 07:18:57 [5] Writing '{"id": 1, "method": "getBlockLogin", "params": []}' to pipe

2014-02-06 07:18:57 [6] Reading from pipe

2014-02-06 07:18:57 [5] Read '{"error": null, "result": true, "id": 1}' from pipe

2014-02-06 07:18:57 [6] getJsonValue() value of 'error' is 'null'

2014-02-06 07:18:57 [6] getJsonValue() value of 'result' is 'true'

2014-02-06 07:18:57 [5] Blocking!

2014-02-06 07:19:00 [5] Communicating with service through pipe

2014-02-06 07:19:00 [6] Creating file: \\.\pipe\opsiclientd

2014-02-06 07:19:00 [6] Pipe successfully opened

2014-02-06 07:19:00 [5] Writing '{"id": 1, "method": "getBlockLogin", "params": []}' to pipe

2014-02-06 07:19:00 [6] Reading from pipe

2014-02-06 07:19:00 [5] Read '{"error": null, "result": true, "id": 1}' from pipe

2014-02-06 07:19:00 [6] getJsonValue() value of 'error' is 'null'

2014-02-06 07:19:00 [6] getJsonValue() value of 'result' is 'true'

2014-02-06 07:19:00 [5] Blocking!

2014-02-06 07:19:03 [5] Communicating with service through pipe

2014-02-06 07:19:03 [6] Creating file: \\.\pipe\opsiclientd

2014-02-06 07:19:03 [6] Pipe successfully opened

2014-02-06 07:19:03 [5] Writing '{"id": 1, "method": "getBlockLogin", "params": []}' to pipe

2014-02-06 07:19:03 [6] Reading from pipe

2014-02-06 07:19:03 [5] Read '{"error": null, "result": true, "id": 1}' from pipe

2014-02-06 07:19:03 [6] getJsonValue() value of 'error' is 'null'

2014-02-06 07:19:03 [6] getJsonValue() value of 'result' is 'true'

2014-02-06 07:19:03 [5] Blocking!

2014-02-06 07:19:06 [5] Communicating with service through pipe

2014-02-06 07:19:06 [6] Creating file: \\.\pipe\opsiclientd

2014-02-06 07:19:06 [6] Pipe successfully opened

2014-02-06 07:19:06 [5] Writing '{"id": 1, "method": "getBlockLogin", "params": []}' to pipe

2014-02-06 07:19:06 [6] Reading from pipe

2014-02-06 07:19:06 [5] Read '{"error": null, "result": true, "id": 1}' from pipe

2014-02-06 07:19:06 [6] getJsonValue() value of 'error' is 'null'

2014-02-06 07:19:06 [6] getJsonValue() value of 'result' is 'true'

2014-02-06 07:19:06 [5] Blocking!

2014-02-06 07:19:09 [5] Communicating with service through pipe

2014-02-06 07:19:09 [6] Creating file: \\.\pipe\opsiclientd

2014-02-06 07:19:09 [6] Pipe successfully opened

2014-02-06 07:19:09 [5] Writing '{"id": 1, "method": "getBlockLogin", "params": []}' to pipe

2014-02-06 07:19:09 [6] Reading from pipe

2014-02-06 07:19:09 [5] Read '{"error": null, "result": true, "id": 1}' from pipe

2014-02-06 07:19:09 [6] getJsonValue() value of 'error' is 'null'

2014-02-06 07:19:09 [6] getJsonValue() value of 'result' is 'true'

2014-02-06 07:19:09 [5] Blocking!

2014-02-06 07:19:12 [5] Communicating with service through pipe

2014-02-06 07:19:12 [6] Creating file: \\.\pipe\opsiclientd

2014-02-06 07:19:12 [6] Pipe successfully opened

2014-02-06 07:19:12 [5] Writing '{"id": 1, "method": "getBlockLogin", "params": []}' to pipe

2014-02-06 07:19:12 [6] Reading from pipe

2014-02-06 07:19:12 [5] Read '{"error": null, "result": true, "id": 1}' from pipe

2014-02-06 07:19:12 [6] getJsonValue() value of 'error' is 'null'

2014-02-06 07:19:12 [6] getJsonValue() value of 'result' is 'true'

2014-02-06 07:19:12 [5] Blocking!

2014-02-06 07:19:15 [5] Communicating with service through pipe

2014-02-06 07:19:15 [6] Creating file: \\.\pipe\opsiclientd

2014-02-06 07:19:15 [6] Pipe successfully opened

2014-02-06 07:19:15 [5] Writing '{"id": 1, "method": "getBlockLogin", "params": []}' to pipe

2014-02-06 07:19:15 [6] Reading from pipe

2014-02-06 07:19:15 [5] Read '{"error": null, "result": true, "id": 1}' from pipe

2014-02-06 07:19:15 [6] getJsonValue() value of 'error' is 'null'

2014-02-06 07:19:15 [6] getJsonValue() value of 'result' is 'true'

2014-02-06 07:19:15 [5] Blocking!

2014-02-06 07:19:18 [5] Communicating with service through pipe

2014-02-06 07:19:18 [6] Creating file: \\.\pipe\opsiclientd

2014-02-06 07:19:18 [6] Pipe successfully opened

2014-02-06 07:19:19 [5] Writing '{"id": 1, "method": "getBlockLogin", "params": []}' to pipe

2014-02-06 07:19:19 [6] Reading from pipe

2014-02-06 07:19:19 [5] Read '{"error": null, "result": true, "id": 1}' from pipe

2014-02-06 07:19:19 [6] getJsonValue() value of 'error' is 'null'

2014-02-06 07:19:19 [6] getJsonValue() value of 'result' is 'true'

2014-02-06 07:19:19 [5] Blocking!

2014-02-06 07:19:22 [5] Communicating with service through pipe

2014-02-06 07:19:22 [6] Creating file: \\.\pipe\opsiclientd

2014-02-06 07:19:22 [6] Pipe successfully opened

2014-02-06 07:19:22 [5] Writing '{"id": 1, "method": "getBlockLogin", "params": []}' to pipe

2014-02-06 07:19:22 [6] Reading from pipe

2014-02-06 07:19:22 [5] Read '{"error": null, "result": true, "id": 1}' from pipe

2014-02-06 07:19:22 [6] getJsonValue() value of 'error' is 'null'

2014-02-06 07:19:22 [6] getJsonValue() value of 'result' is 'true'

2014-02-06 07:19:22 [5] Blocking!

2014-02-06 07:19:25 [5] Communicating with service through pipe

2014-02-06 07:19:25 [6] Creating file: \\.\pipe\opsiclientd

2014-02-06 07:19:25 [6] Pipe successfully opened

2014-02-06 07:19:25 [5] Writing '{"id": 1, "method": "getBlockLogin", "params": []}' to pipe

2014-02-06 07:19:25 [6] Reading from pipe

2014-02-06 07:19:25 [5] Read '{"error": null, "result": true, "id": 1}' from pipe

2014-02-06 07:19:25 [6] getJsonValue() value of 'error' is 'null'

2014-02-06 07:19:25 [6] getJsonValue() value of 'result' is 'true'

2014-02-06 07:19:25 [5] Blocking!

2014-02-06 07:19:28 [5] Communicating with service through pipe

2014-02-06 07:19:28 [6] Creating file: \\.\pipe\opsiclientd

2014-02-06 07:19:28 [6] Pipe successfully opened

2014-02-06 07:19:28 [5] Writing '{"id": 1, "method": "getBlockLogin", "params": []}' to pipe

2014-02-06 07:19:28 [6] Reading from pipe

2014-02-06 07:19:28 [5] Read '{"error": null, "result": true, "id": 1}' from pipe

2014-02-06 07:19:28 [6] getJsonValue() value of 'error' is 'null'

2014-02-06 07:19:28 [6] getJsonValue() value of 'result' is 'true'

2014-02-06 07:19:28 [5] Blocking!

2014-02-06 07:19:31 [5] Communicating with service through pipe

2014-02-06 07:19:31 [6] Creating file: \\.\pipe\opsiclientd

2014-02-06 07:19:31 [6] Pipe successfully opened

2014-02-06 07:19:31 [5] Writing '{"id": 1, "method": "getBlockLogin", "params": []}' to pipe

2014-02-06 07:19:31 [6] Reading from pipe

2014-02-06 07:19:31 [5] Read '{"error": null, "result": false, "id": 1}' from pipe

2014-02-06 07:19:31 [6] getJsonValue() value of 'error' is 'null'

2014-02-06 07:19:31 [6] getJsonValue() value of 'result' is 'false'

2014-02-06 07:19:31 [5] Not blocking!

2014-02-06 09:08:26 [6] Registry value LoginBlockerLogLevel read, result 6

2014-02-06 09:08:26 [5] LoginBlockerLogLevel is: 6

2014-02-06 09:08:26 [6] Registry value LoginBlockerTimeoutConnect read, result 120

2014-02-06 09:08:26 [5] LoginBlockerTimeoutConnect is: 120

2014-02-06 09:08:26 [5] Communicating with service through pipe

2014-02-06 09:08:26 [6] Creating file: \\.\pipe\opsiclientd

2014-02-06 09:08:26 [6] Pipe successfully opened

2014-02-06 09:08:26 [5] Writing '{"id": 1, "method": "getBlockLogin", "params": []}' to pipe

2014-02-06 09:08:26 [6] Reading from pipe

2014-02-06 09:08:26 [5] Read '{"error": null, "result": false, "id": 1}' from pipe

2014-02-06 09:08:26 [6] getJsonValue() value of 'error' is 'null'

2014-02-06 09:08:26 [6] getJsonValue() value of 'result' is 'false'

2014-02-06 09:08:26 [5] Not blocking!

2014-02-06 11:49:40 [6] Registry value LoginBlockerLogLevel read, result 6

2014-02-06 11:49:40 [5] LoginBlockerLogLevel is: 6

2014-02-06 11:49:40 [6] Registry value LoginBlockerTimeoutConnect read, result 120

2014-02-06 11:49:40 [5] LoginBlockerTimeoutConnect is: 120

2014-02-06 11:49:40 [5] Communicating with service through pipe

2014-02-06 11:49:40 [6] Creating file: \\.\pipe\opsiclientd

2014-02-06 11:49:40 [6] Pipe successfully opened

2014-02-06 11:49:40 [5] Writing '{"id": 1, "method": "getBlockLogin", "params": []}' to pipe

2014-02-06 11:49:40 [6] Reading from pipe

2014-02-06 11:49:40 [5] Read '{"error": null, "result": false, "id": 1}' from pipe

2014-02-06 11:49:40 [6] getJsonValue() value of 'error' is 'null'

2014-02-06 11:49:40 [6] getJsonValue() value of 'result' is 'false'

2014-02-06 11:49:40 [5] Not blocking!

Verfasst: **06 Feb 2014, 14:22**

Vielleicht steht in der opsiclientd.log noch etwas nützliches:

Code: Alles auswählen

[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_sync_completed{cache_ready}.reboot   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value global.log_level   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value global.wait_for_gui_timeout   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value global.server_cert_dir   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value global.opsi_host_key   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value global.block_login_notifier   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value global.verify_server_cert   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value global.locale_dir   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value global.state_file   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value global.verify_server_cert_by_ca   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value global.log_dir   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value global.host_id   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value global.timeline_db   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value global.log_file   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value global.base_dir   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_on_demand.super   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_on_demand.name   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_on_demand.type   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value opsiclientd_rpc.command   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_on_shutdown.active   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_on_shutdown.super   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_on_shutdown.name   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_on_shutdown.type   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_on_demand{user_logged_in}.shutdown_warning_time   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_on_demand{user_logged_in}.name   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_software_on_demand.super   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_software_on_demand.type   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_net_connection.active   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_net_connection.wql   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_net_connection.super   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_net_connection.type   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value cache_service.extension_config_dir   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value cache_service.storage_dir   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value cache_service.product_cache_max_size   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value config_service.url   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value config_service.connection_timeout   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value config_service.user_cancelable_after   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_gui_startup{installation_pending}.active   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_gui_startup{installation_pending}.name   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_on_shutdown{installation_pending}.active   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_on_shutdown{installation_pending}.name   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value precondition_installation_pending.installation_pending   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_gui_startup{cache_ready}.use_cached_config   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_gui_startup{cache_ready}.use_cached_products   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_gui_startup{cache_ready}.action_warning_time   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_gui_startup{cache_ready}.action_user_cancelable   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_default.shutdown_warning_repetition_time   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_default.cache_products   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_default.action_message   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_default.max_repetitions   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_default.use_cached_config   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_default.cache_dynamic_bandwidth   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_default.block_login   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_default.cache_max_bandwidth   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_default.lock_workstation   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_default.action_warning_time   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_default.shutdown_notifier_desktop   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_default.action_message[fr]   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_default.post_sync_config_to_server   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_default.shutdown   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_default.process_shutdown_requests   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_default.shutdown_user_cancelable   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_default.write_log_to_service   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_default.get_config_from_service   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_default.reboot   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_default.pre_action_processor_command   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_default.action_processor_command   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_default.event_notifier_desktop   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_default.shutdown_warning_time   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_default.action_processor_desktop   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_default.notification_delay   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_default.shutdown_warning_message   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_default.type   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_default.post_sync_config_from_server   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_default.process_actions   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_default.shutdown_notifier_command   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_default.sync_config_to_server   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_default.update_action_processor   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_default.action_processor_timeout   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_default.shutdown_warning_message[de]   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_default.update_config_file   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_default.event_notifier_command   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_default.action_message[de]   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_default.sync_config_from_server   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_default.post_action_processor_command   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_default.shutdown_warning_message[fr]   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_default.logoff_current_user   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_default.action_notifier_command   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_default.interval   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_default.activation_delay   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_default.action_type   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_default.action_user_cancelable   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_default.use_cached_products   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_default.action_notifier_desktop   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value precondition_cache_ready.products_cached   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value precondition_cache_ready.config_cached   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value notification_server.interface   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value notification_server.popup_port   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value notification_server.start_port   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value notification_server.port   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value control_server.ssl_server_cert_file   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value control_server.static_dir   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value control_server.ssl_server_key_file   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value control_server.interface   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value control_server.port   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_sync.process_actions   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_sync.event_notifier_command   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_sync.cache_products   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_sync.super   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_sync.sync_config_to_server   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_sync.sync_config_from_server   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_sync.cache_dynamic_bandwidth   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_sync.type   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_gui_startup.super   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_gui_startup.name   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_gui_startup.block_login   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_gui_startup.type   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_silent_install.event_notifier_command   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_silent_install.name   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_silent_install.super   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_silent_install.action_processor_command   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_silent_install.action_processor_productids   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_silent_install.action_processor_desktop   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_silent_install.action_processor_timeout   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_silent_install.process_shutdown_requests   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_silent_install.type   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value opsiclientd_notifier.command   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value action_processor.delete_user   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value action_processor.filename   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value action_processor.create_environment   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value action_processor.create_user   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value action_processor.command   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value action_processor.local_dir   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value action_processor.remote_dir   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value action_processor.run_as_user   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_sync_completed.process_actions   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_sync_completed.event_notifier_command   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_sync_completed.super   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_sync_completed.get_config_from_service   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_sync_completed.write_log_to_service   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_sync_completed.type   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_user_login.action_message   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_user_login.action_type   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_user_login.write_log_to_service   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_user_login.block_login   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_user_login.active   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_user_login.action_message[fr]   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_user_login.action_processor_timeout   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_user_login.process_shutdown_requests   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_user_login.super   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_user_login.update_config_file   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_user_login.event_notifier_command   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_user_login.action_message[de]   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_user_login.get_config_from_service   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_user_login.action_processor_command   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_user_login.event_notifier_desktop   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_user_login.action_processor_desktop   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_user_login.type   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_user_login.update_action_processor   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value precondition_user_logged_in.user_logged_in   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_gui_startup{user_logged_in}.shutdown_warning_time   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_gui_startup{user_logged_in}.name   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_gui_startup{user_logged_in}.block_login   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_sync_completed{cache_ready_user_logged_in}.shutdown_warning_time   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_sync_completed{cache_ready_user_logged_in}.reboot   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_sync_completed{cache_ready_user_logged_in}.shutdown_user_cancelable   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value depot_server.url   (Config.pyo|198)
[4] [Feb 06 07:16:31] [ opsiclientd                   ] Refusing to set empty value for config value 'url' of section 'depot_server'   (Config.pyo|202)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value depot_server.username   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value depot_server.drive   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value depot_server.depot_id   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_timer_silentinstall.active   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_timer_silentinstall.interval   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_timer_silentinstall.super   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_timer_silentinstall.type   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_timer.active   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_timer.interval   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_timer.super   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value event_timer.type   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value precondition_cache_ready_user_logged_in.user_logged_in   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value precondition_cache_ready_user_logged_in.products_cached   (Config.pyo|198)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Setting config value precondition_cache_ready_user_logged_in.config_cached   (Config.pyo|198)
[5] [Feb 06 07:16:31] [ opsiclientd                   ] Config read   (Config.pyo|319)
[5] [Feb 06 07:16:31] [ opsiclientd                   ] Setting locale dir to 'C:\Program Files (x86)\opsi.org\opsi-client-agent\locale'   (Localization.pyo|59)
[5] [Feb 06 07:16:31] [ opsiclientd                   ] Loading translation for language 'de'   (Localization.pyo|61)
[1] [Feb 06 07:16:31] [ opsiclientd                   ] Opsiclientd version: 4.0.76 (full)   (Opsiclientd.pyo|237)
[1] [Feb 06 07:16:31] [ opsiclientd                   ] Commandline: C:\Program Files (x86)\opsi.org\opsi-client-agent\opsiclientd.exe   (Opsiclientd.pyo|242)
[1] [Feb 06 07:16:31] [ opsiclientd                   ] Working directory: C:\Windows\system32   (Opsiclientd.pyo|244)
[5] [Feb 06 07:16:31] [ opsiclientd                   ] Using host id 'fini-451.sparmit.local'   (Opsiclientd.pyo|246)
[5] [Feb 06 07:16:31] [ opsiclientd                   ] Block login now set to 'True'   (Opsiclientd.pyo|112)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Starting block login notifier app   (Opsiclientd.pyo|122)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Searching pids of process name winlogon.exe (session id: 1)   (Windows.pyo|1335)
[6] [Feb 06 07:16:31] [ opsiclientd                   ] Found process winlogon.exe with matching name (pid 884, session 1)   (Windows.pyo|1357)
[5] [Feb 06 07:16:31] [ opsiclientd                   ] Executing: 'C:\Program Files (x86)\opsi.org\opsi-client-agent\\notifier.exe -s notifier\\block_login.ini' in session '1' on desktop 'winsta0\winlogon'   (Windows.pyo|1514)
[6] [Feb 06 07:16:37] [ opsiclientd                   ] Process startet, pid: 2932   (Windows.pyo|1517)
[5] [Feb 06 07:16:37] [ opsiclientd                   ] Starting reactor   (Opsiclientd.pyo|252)
[5] [Feb 06 07:16:37] [ opsiclientd                   ] Starting control pipe   (Opsiclientd.pyo|265)
[5] [Feb 06 07:16:37] [ opsiclientd                   ] Control pipe started   (Opsiclientd.pyo|269)
[5] [Feb 06 07:16:37] [ opsiclientd                   ] Starting control server   (Opsiclientd.pyo|274)
[6] [Feb 06 07:16:37] [ control pipe                  ] Creating pipe \\.\pipe\opsiclientd   (ControlPipe.pyo|253)
[6] [Feb 06 07:16:37] [ control server                ] ControlServer initiated   (ControlServer.pyo|366)
[5] [Feb 06 07:16:37] [ opsiclientd                   ] Control server started   (Opsiclientd.pyo|283)
[6] [Feb 06 07:16:37] [ control server                ] creating root resource   (ControlServer.pyo|371)
[5] [Feb 06 07:16:37] [ opsiclientd                   ] Starting cache service   (Opsiclientd.pyo|291)
[5] [Feb 06 07:16:37] [ opsiclientd                   ] Cache service started   (Opsiclientd.pyo|295)
[6] [Feb 06 07:16:37] [ opsiclientd                   ] Precondition 'installation_pending' created: {u'installation_pending': True}   (Events.pyo|856)
[6] [Feb 06 07:16:37] [ opsiclientd                   ] Precondition 'cache_ready' created: {u'products_cached': True, u'config_cached': True}   (Events.pyo|856)
[6] [Feb 06 07:16:37] [ opsiclientd                   ] Precondition 'user_logged_in' created: {u'user_logged_in': True}   (Events.pyo|856)
[6] [Feb 06 07:16:37] [ opsiclientd                   ] Precondition 'cache_ready_user_logged_in' created: {u'user_logged_in': True, u'products_cached': True, u'config_cached': True}   (Events.pyo|856)
[6] [Feb 06 07:16:37] [ opsiclientd                   ] 
Event config 'sync_completed{cache_ready}' args:
{ 
"logoffCurrentUser" : false,
"lockWorkstation" : false,
"updateConfigFile" : true,
"actionNotifierDesktop" : "current",
"shutdownUserCancelable" : 0,
"actionType" : "default",
"shutdown" : false,
"shutdownWarningRepetitionTime" : 3600,
"activationDelay" : 0,
"postSyncConfigToServer" : false,
"maxRepetitions" : -1,
"writeLogToService" : false,
"reboot" : true,
"updateActionProcessor" : true,
"shutdownNotifierDesktop" : "current",
"syncConfigFromServer" : false,
"type" : "sync completed",
"actionNotifierCommand" : "C:\\Program Files (x86)\\opsi.org\\opsi-client-agent\\\\notifier.exe -p %port% -i %id% -s notifier\\\\action.ini",
"useCachedConfig" : false,
"actionMessage" : "Starte die Bearbeitung von Produkt-Aktionen. Sie können diese Aktion insgesamt %action_user_cancelable% mal abbrechen. Die Aktion wurde bereits %state.action_processing_cancel_counter% mal abgebrochen.",
"blockLogin" : false,
"actionProcessorCommand" : "%action_processor.command%",
"eventNotifierDesktop" : "current",
"notificationDelay" : 0,
"cacheMaxBandwidth" : 0,
"actionUserCancelable" : 0,
"postSyncConfigFromServer" : false,
"cacheProducts" : false,
"useCachedProducts" : false,
"preconditions" : 
          { 
          "products_cached" : true,
          "config_cached" : true
          },
"postActionProcessorCommand" : "",
"shutdownNotifierCommand" : "C:\\Program Files (x86)\\opsi.org\\opsi-client-agent\\\\notifier.exe -p %port% -i %id% -s notifier\\\\shutdown.ini",
"getConfigFromService" : false,
"actionProcessorDesktop" : "current",
"actionProcessorTimeout" : 10800,
"preActionProcessorCommand" : "",
"cacheDynamicBandwidth" : false,
"processActions" : false,
"interval" : -1,
"eventNotifierCommand" : "",
"shutdownWarningMessage" : "Ein Neustart wird benötigt um die Software-Installationen abzuschliessen. Sie können diesen Neustart insgesamt %shutdown_user_cancelable% mal verschieben. Der Neustart wurde bereits %state.shutdown_cancel_counter% mal verschoben.",
"syncConfigToServer" : false,
"shutdownWarningTime" : 0,
"processShutdownRequests" : true,
"actionWarningTime" : 0
}
   (Events.pyo|1061)
[6] [Feb 06 07:16:37] [ opsiclientd                   ] 
Event config 'gui_startup{installation_pending}' args:
{ 
"logoffCurrentUser" : false,
"lockWorkstation" : false,
"updateConfigFile" : true,
"actionNotifierDesktop" : "current",
"shutdownUserCancelable" : 0,
"actionType" : "default",
"shutdown" : false,
"shutdownWarningRepetitionTime" : 3600,
"activationDelay" : 0,
"postSyncConfigToServer" : false,
"maxRepetitions" : -1,
"writeLogToService" : true,
"reboot" : false,
"name" : "gui_startup",
"updateActionProcessor" : true,
"shutdownNotifierDesktop" : "current",
"syncConfigFromServer" : false,
"type" : "gui startup",
"actionNotifierCommand" : "C:\\Program Files (x86)\\opsi.org\\opsi-client-agent\\\\notifier.exe -p %port% -i %id% -s notifier\\\\action.ini",
"useCachedConfig" : false,
"actionMessage" : "Starte die Bearbeitung von Produkt-Aktionen. Sie können diese Aktion insgesamt %action_user_cancelable% mal abbrechen. Die Aktion wurde bereits %state.action_processing_cancel_counter% mal abgebrochen.",
"blockLogin" : true,
"actionProcessorCommand" : "%action_processor.command%",
"eventNotifierDesktop" : "current",
"notificationDelay" : 0,
"cacheMaxBandwidth" : 0,
"actionUserCancelable" : 0,
"postSyncConfigFromServer" : false,
"cacheProducts" : false,
"useCachedProducts" : false,
"preconditions" : 
          { 
          "installation_pending" : true
          },
"postActionProcessorCommand" : "",
"shutdownNotifierCommand" : "C:\\Program Files (x86)\\opsi.org\\opsi-client-agent\\\\notifier.exe -p %port% -i %id% -s notifier\\\\shutdown.ini",
"getConfigFromService" : true,
"actionProcessorDesktop" : "current",
"actionProcessorTimeout" : 10800,
"preActionProcessorCommand" : "",
"cacheDynamicBandwidth" : false,
"processActions" : true,
"interval" : -1,
"eventNotifierCommand" : "C:\\Program Files (x86)\\opsi.org\\opsi-client-agent\\\\notifier.exe -p %port% -i %id% -s notifier\\\\event.ini",
"shutdownWarningMessage" : "Ein Neustart wird benötigt um die Software-Installationen abzuschliessen. Sie können diesen Neustart insgesamt %shutdown_user_cancelable% mal verschieben. Der Neustart wurde bereits %state.shutdown_cancel_counter% mal verschoben.",
"syncConfigToServer" : false,
"shutdownWarningTime" : 0,
"processShutdownRequests" : true,
"actionWarningTime" : 0
}
   (Events.pyo|1061)
[6] [Feb 06 07:16:37] [ opsiclientd                   ] 
Event config 'gui_startup' args:
{ 
"logoffCurrentUser" : false,
"lockWorkstation" : false,
"updateConfigFile" : true,
"actionNotifierDesktop" : "current",
"shutdownUserCancelable" : 0,
"actionType" : "default",
"shutdown" : false,
"shutdownWarningRepetitionTime" : 3600,
"activationDelay" : 0,
"postSyncConfigToServer" : false,
"maxRepetitions" : -1,
"writeLogToService" : true,
"reboot" : false,
"name" : "gui_startup",
"updateActionProcessor" : true,
"shutdownNotifierDesktop" : "current",
"syncConfigFromServer" : false,
"type" : "gui startup",
"actionNotifierCommand" : "C:\\Program Files (x86)\\opsi.org\\opsi-client-agent\\\\notifier.exe -p %port% -i %id% -s notifier\\\\action.ini",
"useCachedConfig" : false,
"actionMessage" : "Starte die Bearbeitung von Produkt-Aktionen. Sie können diese Aktion insgesamt %action_user_cancelable% mal abbrechen. Die Aktion wurde bereits %state.action_processing_cancel_counter% mal abgebrochen.",
"blockLogin" : true,
"actionProcessorCommand" : "%action_processor.command%",
"eventNotifierDesktop" : "current",
"notificationDelay" : 0,
"cacheMaxBandwidth" : 0,
"actionUserCancelable" : 0,
"postSyncConfigFromServer" : false,
"cacheProducts" : false,
"useCachedProducts" : false,
"preconditions" : 
          { 

          },
"postActionProcessorCommand" : "",
"shutdownNotifierCommand" : "C:\\Program Files (x86)\\opsi.org\\opsi-client-agent\\\\notifier.exe -p %port% -i %id% -s notifier\\\\shutdown.ini",
"getConfigFromService" : true,
"actionProcessorDesktop" : "current",
"actionProcessorTimeout" : 10800,
"preActionProcessorCommand" : "",
"cacheDynamicBandwidth" : false,
"processActions" : true,
"interval" : -1,
"eventNotifierCommand" : "C:\\Program Files (x86)\\opsi.org\\opsi-client-agent\\\\notifier.exe -p %port% -i %id% -s notifier\\\\event.ini",
"shutdownWarningMessage" : "Ein Neustart wird benötigt um die Software-Installationen abzuschliessen. Sie können diesen Neustart insgesamt %shutdown_user_cancelable% mal verschieben. Der Neustart wurde bereits %state.shutdown_cancel_counter% mal verschoben.",
"syncConfigToServer" : false,
"shutdownWarningTime" : 0,
"processShutdownRequests" : true,
"actionWarningTime" : 0
}
   (Events.pyo|1061)
[6] [Feb 06 07:16:38] [ opsiclientd                   ] 
Event config 'silent_install' args:
{ 
"logoffCurrentUser" : false,
"lockWorkstation" : false,
"actionProcessorProductIds" : 
          [ 
          "swaudit",
          "hwaudit"
          ],
"updateConfigFile" : true,
"actionNotifierDesktop" : "current",
"shutdownUserCancelable" : 0,
"actionType" : "default",
"shutdown" : false,
"shutdownWarningRepetitionTime" : 3600,
"activationDelay" : 0,
"postSyncConfigToServer" : false,
"maxRepetitions" : -1,
"writeLogToService" : true,
"reboot" : false,
"name" : "silent_install",
"updateActionProcessor" : true,
"shutdownNotifierDesktop" : "current",
"syncConfigFromServer" : false,
"type" : "custom",
"actionNotifierCommand" : "C:\\Program Files (x86)\\opsi.org\\opsi-client-agent\\\\notifier.exe -p %port% -i %id% -s notifier\\\\action.ini",
"useCachedConfig" : false,
"actionMessage" : "Starte die Bearbeitung von Produkt-Aktionen. Sie können diese Aktion insgesamt %action_user_cancelable% mal abbrechen. Die Aktion wurde bereits %state.action_processing_cancel_counter% mal abgebrochen.",
"blockLogin" : false,
"actionProcessorCommand" : "%action_processor.command% /productlist %action_processor_productids% /silent",
"eventNotifierDesktop" : "current",
"notificationDelay" : 0,
"cacheMaxBandwidth" : 0,
"actionUserCancelable" : 0,
"postSyncConfigFromServer" : false,
"cacheProducts" : false,
"useCachedProducts" : false,
"preconditions" : 
          { 

          },
"postActionProcessorCommand" : "",
"shutdownNotifierCommand" : "C:\\Program Files (x86)\\opsi.org\\opsi-client-agent\\\\notifier.exe -p %port% -i %id% -s notifier\\\\shutdown.ini",
"getConfigFromService" : true,
"actionProcessorDesktop" : "winlogon",
"actionProcessorTimeout" : 300,
"preActionProcessorCommand" : "",
"cacheDynamicBandwidth" : false,
"processActions" : true,
"interval" : -1,
"eventNotifierCommand" : "",
"shutdownWarningMessage" : "Ein Neustart wird benötigt um die Software-Installationen abzuschliessen. Sie können diesen Neustart insgesamt %shutdown_user_cancelable% mal verschieben. Der Neustart wurde bereits %state.shutdown_cancel_counter% mal verschoben.",
"syncConfigToServer" : false,
"shutdownWarningTime" : 0,
"processShutdownRequests" : false,
"actionWarningTime" : 0
}
   (Events.pyo|1061)
[5] [Feb 06 07:16:38] [ opsiclientd                   ] Event config 'on_shutdown' is deactivated   (Events.pyo|916)
[6] [Feb 06 07:16:38] [ opsiclientd                   ] 
Event config 'gui_startup{cache_ready}' args:
{ 
"logoffCurrentUser" : false,
"lockWorkstation" : false,
"updateConfigFile" : true,
"actionNotifierDesktop" : "current",
"shutdownUserCancelable" : 0,
"actionType" : "default",
"shutdown" : false,
"shutdownWarningRepetitionTime" : 3600,
"activationDelay" : 0,
"postSyncConfigToServer" : false,
"maxRepetitions" : -1,
"writeLogToService" : true,
"reboot" : false,
"name" : "gui_startup",
"updateActionProcessor" : true,
"shutdownNotifierDesktop" : "current",
"syncConfigFromServer" : false,
"type" : "gui startup",
"actionNotifierCommand" : "C:\\Program Files (x86)\\opsi.org\\opsi-client-agent\\\\notifier.exe -p %port% -i %id% -s notifier\\\\action.ini",
"useCachedConfig" : true,
"actionMessage" : "Starte die Bearbeitung von Produkt-Aktionen. Sie können diese Aktion insgesamt %action_user_cancelable% mal abbrechen. Die Aktion wurde bereits %state.action_processing_cancel_counter% mal abgebrochen.",
"blockLogin" : true,
"actionProcessorCommand" : "%action_processor.command%",
"eventNotifierDesktop" : "current",
"notificationDelay" : 0,
"cacheMaxBandwidth" : 0,
"actionUserCancelable" : 3,
"postSyncConfigFromServer" : false,
"cacheProducts" : false,
"useCachedProducts" : true,
"preconditions" : 
          { 
          "products_cached" : true,
          "config_cached" : true
          },
"postActionProcessorCommand" : "",
"shutdownNotifierCommand" : "C:\\Program Files (x86)\\opsi.org\\opsi-client-agent\\\\notifier.exe -p %port% -i %id% -s notifier\\\\shutdown.ini",
"getConfigFromService" : true,
"actionProcessorDesktop" : "current",
"actionProcessorTimeout" : 10800,
"preActionProcessorCommand" : "",
"cacheDynamicBandwidth" : false,
"processActions" : true,
"interval" : -1,
"eventNotifierCommand" : "C:\\Program Files (x86)\\opsi.org\\opsi-client-agent\\\\notifier.exe -p %port% -i %id% -s notifier\\\\event.ini",
"shutdownWarningMessage" : "Ein Neustart wird benötigt um die Software-Installationen abzuschliessen. Sie können diesen Neustart insgesamt %shutdown_user_cancelable% mal verschieben. Der Neustart wurde bereits %state.shutdown_cancel_counter% mal verschoben.",
"syncConfigToServer" : false,
"shutdownWarningTime" : 0,
"processShutdownRequests" : true,
"actionWarningTime" : 60
}
   (Events.pyo|1061)
[6] [Feb 06 07:16:38] [ opsiclientd                   ] 
Event config 'on_demand' args:
{ 
"logoffCurrentUser" : false,
"lockWorkstation" : false,
"updateConfigFile" : true,
"actionNotifierDesktop" : "current",
"shutdownUserCancelable" : 0,
"actionType" : "default",
"shutdown" : false,
"shutdownWarningRepetitionTime" : 3600,
"activationDelay" : 0,
"postSyncConfigToServer" : false,
"maxRepetitions" : -1,
"writeLogToService" : true,
"reboot" : false,
"name" : "on_demand",
"updateActionProcessor" : true,
"shutdownNotifierDesktop" : "current",
"syncConfigFromServer" : false,
"type" : "custom",
"actionNotifierCommand" : "C:\\Program Files (x86)\\opsi.org\\opsi-client-agent\\\\notifier.exe -p %port% -i %id% -s notifier\\\\action.ini",
"useCachedConfig" : false,
"actionMessage" : "Starte die Bearbeitung von Produkt-Aktionen. Sie können diese Aktion insgesamt %action_user_cancelable% mal abbrechen. Die Aktion wurde bereits %state.action_processing_cancel_counter% mal abgebrochen.",
"blockLogin" : false,
"actionProcessorCommand" : "%action_processor.command%",
"eventNotifierDesktop" : "current",
"notificationDelay" : 0,
"cacheMaxBandwidth" : 0,
"actionUserCancelable" : 0,
"postSyncConfigFromServer" : false,
"cacheProducts" : false,
"useCachedProducts" : false,
"preconditions" : 
          { 

          },
"postActionProcessorCommand" : "",
"shutdownNotifierCommand" : "C:\\Program Files (x86)\\opsi.org\\opsi-client-agent\\\\notifier.exe -p %port% -i %id% -s notifier\\\\shutdown.ini",
"getConfigFromService" : true,
"actionProcessorDesktop" : "current",
"actionProcessorTimeout" : 10800,
"preActionProcessorCommand" : "",
"cacheDynamicBandwidth" : false,
"processActions" : true,
"interval" : -1,
"eventNotifierCommand" : "C:\\Program Files (x86)\\opsi.org\\opsi-client-agent\\\\notifier.exe -p %port% -i %id% -s notifier\\\\event.ini",
"shutdownWarningMessage" : "Ein Neustart wird benötigt um die Software-Installationen abzuschliessen. Sie können diesen Neustart insgesamt %shutdown_user_cancelable% mal verschieben. Der Neustart wurde bereits %state.shutdown_cancel_counter% mal verschoben.",
"syncConfigToServer" : false,
"shutdownWarningTime" : 0,
"processShutdownRequests" : true,
"actionWarningTime" : 0
}
   (Events.pyo|1061)
[6] [Feb 06 07:16:38] [ opsiclientd                   ] 
Event config 'sync_completed{cache_ready_user_logged_in}' args:
{ 
"logoffCurrentUser" : false,
"lockWorkstation" : false,
"updateConfigFile" : true,
"actionNotifierDesktop" : "current",
"shutdownUserCancelable" : 10,
"actionType" : "default",
"shutdown" : false,
"shutdownWarningRepetitionTime" : 3600,
"activationDelay" : 0,
"postSyncConfigToServer" : false,
"maxRepetitions" : -1,
"writeLogToService" : false,
"reboot" : true,
"updateActionProcessor" : true,
"shutdownNotifierDesktop" : "current",
"syncConfigFromServer" : false,
"type" : "sync completed",
"actionNotifierCommand" : "C:\\Program Files (x86)\\opsi.org\\opsi-client-agent\\\\notifier.exe -p %port% -i %id% -s notifier\\\\action.ini",
"useCachedConfig" : false,
"actionMessage" : "Starte die Bearbeitung von Produkt-Aktionen. Sie können diese Aktion insgesamt %action_user_cancelable% mal abbrechen. Die Aktion wurde bereits %state.action_processing_cancel_counter% mal abgebrochen.",
"blockLogin" : false,
"actionProcessorCommand" : "%action_processor.command%",
"eventNotifierDesktop" : "current",
"notificationDelay" : 0,
"cacheMaxBandwidth" : 0,
"actionUserCancelable" : 0,
"postSyncConfigFromServer" : false,
"cacheProducts" : false,
"useCachedProducts" : false,
"preconditions" : 
          { 
          "user_logged_in" : true,
          "products_cached" : true,
          "config_cached" : true
          },
"postActionProcessorCommand" : "",
"shutdownNotifierCommand" : "C:\\Program Files (x86)\\opsi.org\\opsi-client-agent\\\\notifier.exe -p %port% -i %id% -s notifier\\\\shutdown.ini",
"getConfigFromService" : false,
"actionProcessorDesktop" : "current",
"actionProcessorTimeout" : 10800,
"preActionProcessorCommand" : "",
"cacheDynamicBandwidth" : false,
"processActions" : false,
"interval" : -1,
"eventNotifierCommand" : "",
"shutdownWarningMessage" : "Ein Neustart wird benötigt um die Software-Installationen abzuschliessen. Sie können diesen Neustart insgesamt %shutdown_user_cancelable% mal verschieben. Der Neustart wurde bereits %state.shutdown_cancel_counter% mal verschoben.",
"syncConfigToServer" : false,
"shutdownWarningTime" : 300,
"processShutdownRequests" : true,
"actionWarningTime" : 0
}
   (Events.pyo|1061)
[6] [Feb 06 07:16:38] [ opsiclientd                   ] 
Event config 'gui_startup{user_logged_in}' args:
{ 
"logoffCurrentUser" : false,
"lockWorkstation" : false,
"updateConfigFile" : true,
"actionNotifierDesktop" : "current",
"shutdownUserCancelable" : 0,
"actionType" : "default",
"shutdown" : false,
"shutdownWarningRepetitionTime" : 3600,
"activationDelay" : 0,
"postSyncConfigToServer" : false,
"maxRepetitions" : -1,
"writeLogToService" : true,
"reboot" : false,
"name" : "gui_startup",
"updateActionProcessor" : true,
"shutdownNotifierDesktop" : "current",
"syncConfigFromServer" : false,
"type" : "gui startup",
"actionNotifierCommand" : "C:\\Program Files (x86)\\opsi.org\\opsi-client-agent\\\\notifier.exe -p %port% -i %id% -s notifier\\\\action.ini",
"useCachedConfig" : false,
"actionMessage" : "Starte die Bearbeitung von Produkt-Aktionen. Sie können diese Aktion insgesamt %action_user_cancelable% mal abbrechen. Die Aktion wurde bereits %state.action_processing_cancel_counter% mal abgebrochen.",
"blockLogin" : false,
"actionProcessorCommand" : "%action_processor.command%",
"eventNotifierDesktop" : "current",
"notificationDelay" : 0,
"cacheMaxBandwidth" : 0,
"actionUserCancelable" : 0,
"postSyncConfigFromServer" : false,
"cacheProducts" : false,
"useCachedProducts" : false,
"preconditions" : 
          { 
          "user_logged_in" : true
          },
"postActionProcessorCommand" : "",
"shutdownNotifierCommand" : "C:\\Program Files (x86)\\opsi.org\\opsi-client-agent\\\\notifier.exe -p %port% -i %id% -s notifier\\\\shutdown.ini",
"getConfigFromService" : true,
"actionProcessorDesktop" : "current",
"actionProcessorTimeout" : 10800,
"preActionProcessorCommand" : "",
"cacheDynamicBandwidth" : false,
"processActions" : true,
"interval" : -1,
"eventNotifierCommand" : "C:\\Program Files (x86)\\opsi.org\\opsi-client-agent\\\\notifier.exe -p %port% -i %id% -s notifier\\\\event.ini",
"shutdownWarningMessage" : "Ein Neustart wird benötigt um die Software-Installationen abzuschliessen. Sie können diesen Neustart insgesamt %shutdown_user_cancelable% mal verschieben. Der Neustart wurde bereits %state.shutdown_cancel_counter% mal verschoben.",
"syncConfigToServer" : false,
"shutdownWarningTime" : 300,
"processShutdownRequests" : true,
"actionWarningTime" : 0
}
   (Events.pyo|1061)
[5] [Feb 06 07:16:38] [ opsiclientd                   ] Event config 'on_shutdown{installation_pending}' is deactivated   (Events.pyo|916)
[5] [Feb 06 07:16:38] [ opsiclientd                   ] Event config 'timer' is deactivated   (Events.pyo|916)
[5] [Feb 06 07:16:38] [ opsiclientd                   ] Event config 'user_login' is deactivated   (Events.pyo|916)
[6] [Feb 06 07:16:38] [ opsiclientd                   ] 
Event config 'sync_completed' args:
{ 
"logoffCurrentUser" : false,
"lockWorkstation" : false,
"updateConfigFile" : true,
"actionNotifierDesktop" : "current",
"shutdownUserCancelable" : 0,
"actionType" : "default",
"shutdown" : false,
"shutdownWarningRepetitionTime" : 3600,
"activationDelay" : 0,
"postSyncConfigToServer" : false,
"maxRepetitions" : -1,
"writeLogToService" : false,
"reboot" : false,
"updateActionProcessor" : true,
"shutdownNotifierDesktop" : "current",
"syncConfigFromServer" : false,
"type" : "sync completed",
"actionNotifierCommand" : "C:\\Program Files (x86)\\opsi.org\\opsi-client-agent\\\\notifier.exe -p %port% -i %id% -s notifier\\\\action.ini",
"useCachedConfig" : false,
"actionMessage" : "Starte die Bearbeitung von Produkt-Aktionen. Sie können diese Aktion insgesamt %action_user_cancelable% mal abbrechen. Die Aktion wurde bereits %state.action_processing_cancel_counter% mal abgebrochen.",
"blockLogin" : false,
"actionProcessorCommand" : "%action_processor.command%",
"eventNotifierDesktop" : "current",
"notificationDelay" : 0,
"cacheMaxBandwidth" : 0,
"actionUserCancelable" : 0,
"postSyncConfigFromServer" : false,
"cacheProducts" : false,
"useCachedProducts" : false,
"preconditions" : 
          { 

          },

forum.opsi.org

opsi-client-agent Neuinstallation Neustart wird erzwungen

opsi-client-agent Neuinstallation Neustart wird erzwungen

Re: opsi-client-agent Neuinstallation Neustart wird erzwunge

Re: opsi-client-agent Neuinstallation Neustart wird erzwunge

Re: opsi-client-agent Neuinstallation Neustart wird erzwunge

Re: opsi-client-agent Neuinstallation Neustart wird erzwunge

Re: opsi-client-agent Neuinstallation Neustart wird erzwunge

Re: opsi-client-agent Neuinstallation Neustart wird erzwunge

Re: opsi-client-agent Neuinstallation Neustart wird erzwunge