Suggestion to make opsi-ver 4.0.2 compete against others
Verfasst: 27 Feb 2013, 14:17
Hello
I have installed opsi-ver 4.0.2 , under VM , in UBUNTU , after downloading from opsi free dpwnload site . I have tested 3/4 other remote asset management softwares , they have some features which are highly appreciated by lots of clients and I am listing them as follows :
1 ) Auto Discovery of clients in the network : this means that if I input an ip-range , then all the clients within that ip range should be visible -- but the client agent software may or may not be installed in the clients pc/laptops ; even if the client agent software is not installed on the client , then also it should be auto discovered on the LAN / WAN .
2 ) The clients USB port need to be blocked -- some times the USB port's mass storage facility need to be blocked but access to internet through USB data card need to be on .
3 ) An inventory of total hardware and software is required for all the clients present in the LAN/WAN ; aggregate is required and not individual clientwise .
4 ) Patch management , software deplyment / new software installation other that OS installation , under WINDOWS environment is required and is available in other remote asset management softwares .
If the above 4 nos of items are available , then your software will have very good edge over similar Enterprise Remote Asset Management software .
Pls have some consideration on this .
best regards
barun
I have installed opsi-ver 4.0.2 , under VM , in UBUNTU , after downloading from opsi free dpwnload site . I have tested 3/4 other remote asset management softwares , they have some features which are highly appreciated by lots of clients and I am listing them as follows :
1 ) Auto Discovery of clients in the network : this means that if I input an ip-range , then all the clients within that ip range should be visible -- but the client agent software may or may not be installed in the clients pc/laptops ; even if the client agent software is not installed on the client , then also it should be auto discovered on the LAN / WAN .
2 ) The clients USB port need to be blocked -- some times the USB port's mass storage facility need to be blocked but access to internet through USB data card need to be on .
3 ) An inventory of total hardware and software is required for all the clients present in the LAN/WAN ; aggregate is required and not individual clientwise .
4 ) Patch management , software deplyment / new software installation other that OS installation , under WINDOWS environment is required and is available in other remote asset management softwares .
If the above 4 nos of items are available , then your software will have very good edge over similar Enterprise Remote Asset Management software .
Pls have some consideration on this .
best regards
barun