forum.opsi.org

opsi support forum
https://forum.opsi.org/

setup.exe aufruf MSI, Parameter übergabe

https://forum.opsi.org/viewtopic.php?t=4250

Seite 1 von 1

setup.exe aufruf MSI, Parameter übergabe

Verfasst: 03 Feb 2013, 22:28
von rabadag
Hallo Liebes Forum.
bin mal wider am ende meines Lateins.

Versuche ein spezial Software Paket auf Win7/32bit Clients zu verteilen.
Das Start Setup ruft eine MSI Datei auf, die nicht direkt installiert werden kann.
über diese Setup.exe Datei, kann mittels /v" Tranformlist" die Parameter dem MSI Packet mit gegeben werden.

Bei ausführen in der Dos Console funktioniert alles einwandfrei.

Die übergab der MSI Parameter Funktioniert nicht.
Egal ob ich /v "/qb".. /qn etc verwende..

Dos Befehl OK:
setup.exe /S /v" /passive DEDE=1 FRFR=1 ITIT=1 LANGUAGE_SELECTED=DEDE DISTRIBUTOR=70373 AUTOMATICUPDATE=0"


Versuche:

Variante 1 NOK
%ScriptPath%\files\setup.exe /S /v" /passive DEDE=1 FRFR=1 ITIT=1 LANGUAGE_SELECTED=DEDE DISTRIBUTOR=70373 ISSHOWMSILOG=1 AUTOMATICUPDATE=0"

Variante 2 NOK
set $setupstring$ = "/passive " + $DEDE$ + " " + $ENEN$ + " " + $FRFR$ + " " + $ITIT$ + " " + "LANGUAGE_SELECTED=" + $Default-Language$ + " " + $Autoupdate$"

%ScriptPath%\files\setup.exe /S /v"$setupstring$"

Bisher leider ohne Erfolg.


Setup.ins

Code: Alles auswählen

; Copyright (c) uib gmbh (www.uib.de)
; This sourcecode is owned by uib
; and published under the Terms of the General Public License.
; credits: http://www.opsi.org/credits/

[Actions]
requiredWinstVersion >= "4.10.5"

DefVar $InstallId$
DefVar $UninstallProgram$
DefVar $UninstallDir$
DefVar $LogDir$
DefVar $ProductId$
DefVar $MinimumSpace$
DefVar $InstallDir$
DefVar $ExitCode$
DefVar $OS$
DefVar $SystemType$
DefVar $DEDE$
DefVar $ENEN$
DefVar $FRFR$
DefVar $ITIT$
DefVar $ENEB$
DefVar $Default-Language$
DefVar $Autoupdate$
DefVar $setupstring$


Set $LogDir$ = "%SystemDrive%\tmp"
Set $OS$ = GetMsVersionInfo
Set $SystemType$ = GetSystemType

; Sprach Einstellung
Set $DEDE$ = GetProductProperty("DE-DE", "")
Set $ENEN$ = GetProductProperty("EN-EN", "")
Set $FRFR$ = GetProductProperty("FR-FR", "")
Set $ITIT$ = GetProductProperty("IT-IT", "")
Set $ENEB$ = GetProductProperty("EN-EB", "")
Set $Default-Language$ = GetProductProperty("Default-Language", "")
Set $Autoupdate$ = GetProductProperty("Autoupdate", "")


; ----------------------------------------------------------------
; - Please edit the following values                             -
; ----------------------------------------------------------------
Set $ProductId$       = "Compass GPS"
Set $MinimumSpace$    = "540 MB"
Set $InstallDir$      = "%ProgramFilesDir%\Firma\CompassGPS"
Set $InstallId$		  = '{87AAE664-634C-4DC1-9888-AD4AD1717A5C}'
Set $UninstallDir$	  = "%ProgramFilesDir%\InstallShield Installation Information\" + $InstallId$
; ----------------------------------------------------------------



set $setupstring$ = "/passive " + $DEDE$ + " " + $ENEN$ + " " + $FRFR$ + " " + $ITIT$ + " " + "LANGUAGE_SELECTED=" + $Default-Language$ + " " + $Autoupdate$"




if not(HasMinimumSpace ("%SystemDrive%", $MinimumSpace$))
	LogError "Not enough space on %SystemDrive%, " + $MinimumSpace$ + " on drive %SystemDrive% needed for " + $ProductId$
	isFatalError
	; Stop process and set installation status to failed
else
	comment "Show product picture"
	ShowBitmap "%ScriptPath%\" + $ProductId$ + ".png" $ProductId$
	
	if FileExists("%ScriptPath%\delsub1.ins")
		comment "Start uninstall sub section"
		Sub "%ScriptPath%\delsub.ins"
	endif
	
	Message "Installiere " + $ProductId$ + " ..."
			
	if ($OS$ <= "5.2")
		comment "Start setup program"
		Winbatch_install
		
		Sub_check_exitcode
		
		
	else
		if ($SystemType$ = "64 Bit System")
			comment "64 Bit Systems are not supported"
			isFatalError
		else
			comment "Start setup program"
			Winbatch_install_win7
			
			Sub_check_exitcode

		endif
	endif
	
			
	comment "Test for installation success"
	; Test if software marked as installed in registry
	if (GetRegistryStringValue("[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\" + $InstallId$ + "] DisplayName") = "")
	 	logError "Fatal: After Installation [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\" + $InstallId$ + "}] not found"
	 	isFatalError
	else
	 	comment "Successful Installation"
	 
	endif

endif



[Winbatch_install]
%ScriptPath%\files\setup.exe /S /v"$setupstring$"

;%ScriptPath%\files\setup.exe /S /v" /passive DEDE=1 FRFR=1 ITIT=1 LANGUAGE_SELECTED=DEDE DISTRIBUTOR=70373 ISSHOWMSILOG=1 AUTOMATICUPDATE=0"

[Winbatch_install_Win7]
%ScriptPath%\files\setup.exe /S /v"$setupstring$"

%ScriptPath%\files\setup.exe /S /v" /passive DEDE=1 FRFR=1 ITIT=1 LANGUAGE_SELECTED=DEDE DISTRIBUTOR=70373 ISSHOWMSILOG=1 AUTOMATICUPDATE=0"



[Sub_check_exitcode]
comment "Test for installation success via exit code"
set $ExitCode$ = getLastExitCode
; informations to exit codes see
; http://msdn.microsoft.com/en-us/library/aa372835(VS.85).aspx
; http://msdn.microsoft.com/en-us/library/aa368542.aspx
if ($ExitCode$ = "0")
	comment "Looks good: setup program gives exitcode zero"
else
	comment "Setup program gives a exitcode unequal zero: " + $ExitCode$
	if ($ExitCode$ = "1605")
		comment "ERROR_UNKNOWN_PRODUCT	1605	This action is only valid for products that are currently installed."
		comment "Uninstall of a not installed product failed - no problem"
	else
		if ($ExitCode$ = "1641")
			comment "looks good: setup program gives exitcode 1641"
			comment "ERROR_SUCCESS_REBOOT_INITIATED	1641	The installer has initiated a restart. This message is indicative of a success."
		else
			if ($ExitCode$ = "3010")
				comment "looks good: setup program gives exitcode 3010"
				comment "ERROR_SUCCESS_REBOOT_REQUIRED	3010	A restart is required to complete the install. This message is indicative of a success."
			else
				logError "Fatal: Setup program gives an unknown exitcode unequal zero: " + $ExitCode$
				isFatalError
			endif
		endif
	endif
endif
Uninstall.ins

Code: Alles auswählen

; Copyright (c) uib gmbh (www.uib.de)
; This sourcecode is owned by uib gmbh
; and published under the Terms of the General Public License.
; credits: http://www.opsi.org/credits/

[Actions]
requiredWinstVersion >= "4.10.5"

DefVar $InstallId$
DefVar $UninstallProgram$
DefVar $LogDir$
DefVar $ExitCode$
DefVar $ProductId$
DefVar $InstallDir$
DefVar $UninstallDir$

Set $LogDir$ = "%SystemDrive%\tmp"

; ----------------------------------------------------------------
; - Please edit the following values                             -
; ----------------------------------------------------------------
Set $ProductId$       = "Compass GPS"
Set $InstallDir$      = "%ProgramFilesDir%\Widex\CompassGPS"
Set $InstallId$		  = '{87AAE664-634C-4DC1-9888-AD4AD1717A5C}'
Set $UninstallDir$	  = "%ProgramFilesDir%\InstallShield Installation Information\" + $InstallId$
; ----------------------------------------------------------------


comment "Show product picture"
ShowBitmap "%ScriptPath%\" + $ProductId$ + ".png" $ProductId$

if FileExists("%ScriptPath%\delsub.ins")
	comment "Start uninstall sub section"
	Sub "%ScriptPath%\delsub.ins"
endif
delsub.ins

Code: Alles auswählen




if (GetRegistryStringValue("[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\" + $InstallId$ + "] DisplayName") = "")
	 	logError "Fatal: After Installation [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\" + $InstallId$ + "}] not found"
	 	Comment "Software are not installed"
	else
	 	comment "Installed runing deinstall"
	 	Winbatch_uninstall_localsetup
	 	Sub_check_exitcode
	 
	endif


[Winbatch_uninstall_localsetup]
msiexec /passive /x $InstallId$


[Sub_check_exitcode]
comment "Test for installation success via exit code"
set $ExitCode$ = getLastExitCode
; informations to exit codes see
; http://msdn.microsoft.com/en-us/library/aa372835(VS.85).aspx
; http://msdn.microsoft.com/en-us/library/aa368542.aspx
if ($ExitCode$ = "0")
	comment "Looks good: setup program gives exitcode zero"
else
	comment "Setup program gives a exitcode unequal zero: " + $ExitCode$
	if ($ExitCode$ = "1605")
		comment "ERROR_UNKNOWN_PRODUCT	1605	This action is only valid for products that are currently installed."
		comment "Uninstall of a not installed product failed - no problem"
	else
		if ($ExitCode$ = "1641")
			comment "looks good: setup program gives exitcode 1641"
			comment "ERROR_SUCCESS_REBOOT_INITIATED	1641	The installer has initiated a restart. This message is indicative of a success."
		else
			if ($ExitCode$ = "3010")
				comment "looks good: setup program gives exitcode 3010"
				comment "ERROR_SUCCESS_REBOOT_REQUIRED	3010	A restart is required to complete the install. This message is indicative of a success."
			else
				logError "Fatal: Setup program gives an unknown exitcode unequal zero: " + $ExitCode$
				isFatalError
			endif
		endif
	endif
endif

Logfile install

Code: Alles auswählen

[1] [Feb 03 22:15:51:424] opsi-winst 4.11.3.3 started at >>03.02.2013 22:15:49
[1] [Feb 03 22:15:51:424] startmessage opsi-winst created at CentralForm.FormCreate: 03.02.2013 22:15:49
[1] [Feb 03 22:15:51:424] startmessage StartProgramModes and create log: 03.02.2013 22:15:50
[1] [Feb 03 22:15:51:424] startmessage start opsi service connection: 03.02.2013 22:15:50
[1] [Feb 03 22:15:51:424] JSON Bench for backend_info "params":[],"id":1} Start: 22:15:50:281 Time: 00:00:01:122
[1] [Feb 03 22:15:51:424] startmessage create log: 03.02.2013 22:15:51
[6] [Feb 03 22:15:51:425] JSON service request https://192.168.89.9:4447/rpc getDepotId
[6] [Feb 03 22:15:51:538] JSON Bench for getDepotId "params":["wks-test-vm01.widex.local"],"id":1} Start: 22:15:51:425 Time: 00:00:00:113
[6] [Feb 03 22:15:51:543] JSON service request https://192.168.89.9:4447/rpc backend_setOptions
[6] [Feb 03 22:15:51:594] JSON Bench for backend_setOptions "params":[{"processProductOnClientSequence":true}] Start: 22:15:51:543 Time: 00:00:00:051
[6] [Feb 03 22:15:51:599] JSON service request https://192.168.89.9:4447/rpc productOnClient_getObjects
[6] [Feb 03 22:15:51:991] JSON Bench for productOnClient_getObjects "params":["",{"clientId":"wks-test-vm01.widex.loca Start: 22:15:51:599 Time: 00:00:00:392
[6] [Feb 03 22:15:52:003] JSON service request https://192.168.89.9:4447/rpc backend_setOptions
[6] [Feb 03 22:15:52:051] JSON Bench for backend_setOptions "params":[{"processProductOnClientSequence":false} Start: 22:15:52:003 Time: 00:00:00:048
[5] [Feb 03 22:15:52:056] Computername:wks-test-vm01.widex.local
[5] [Feb 03 22:15:52:056] Computername according to Environment Variable :WKS-TEST-VM01
[5] [Feb 03 22:15:52:056] opsi service URL https://192.168.89.9:4447
[5] [Feb 03 22:15:52:056] Depot path:  p:\
[5] [Feb 03 22:15:52:056] 
[5] [Feb 03 22:15:52:062] bootmode BKSTD
[5] [Feb 03 22:15:52:062] ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[5] [Feb 03 22:15:52:062] Resolved sequence of products (03.02.2013 22:15:52): 
[5] [Feb 03 22:15:52:063] Product 18 	compass-gps : setup
[5] [Feb 03 22:15:52:063] ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[6] [Feb 03 22:15:52:099] JSON service request https://192.168.89.9:4447/rpc getProductProperties_hash
[6] [Feb 03 22:15:52:248] JSON Bench for getProductProperties_hash "params":["compass-gps","wks-test-vm01.widex.local Start: 22:15:52:099 Time: 00:00:00:149
[6] [Feb 03 22:15:52:254] JSON service request https://192.168.89.9:4447/rpc getProduct_hash
[6] [Feb 03 22:15:52:339] JSON Bench for getProduct_hash "params":["compass-gps","opsi.widex.local"],"id":1 Start: 22:15:52:254 Time: 00:00:00:085
[6] [Feb 03 22:15:52:344] JSON service request https://192.168.89.9:4447/rpc productOnClient_getObjects
[6] [Feb 03 22:15:52:410] JSON Bench for productOnClient_getObjects "params":["",{"clientId":"wks-test-vm01.widex.loca Start: 22:15:52:344 Time: 00:00:00:066
[5] [Feb 03 22:15:52:416] scriptname: "setup.ins", special path: "p:\compass-gps\"
[6] [Feb 03 22:15:52:416] JSON service request https://192.168.89.9:4447/rpc productOnClient_updateObject
[6] [Feb 03 22:15:52:494] JSON Bench for productOnClient_updateObject "params":[{"clientId":"wks-test-vm01.widex.local", Start: 22:15:52:416 Time: 00:00:00:078
[1] [Feb 03 22:15:52:524] 
[1] [Feb 03 22:15:52:524] ============ Version 4.11.3.3 WIN32 script "p:\compass-gps\setup.ins"
[1] [Feb 03 22:15:52:524]              start: 2013-02-03  22:15:52 
[1] [Feb 03 22:15:52:524]              installing product: compass-gps_1.0-1
[1] [Feb 03 22:15:52:524]              on client named    "wks-test-vm01.widex.local"
[1] [Feb 03 22:15:52:525]              loggedin user    "wininstall"
[1] [Feb 03 22:15:52:525]              winst running as    "SYSTEM"
[1] [Feb 03 22:15:52:525]              winst running with admin privileges
[1] [Feb 03 22:15:52:525]              winst running in standard script mode
[1] [Feb 03 22:15:52:525] [executing: "C:\Program Files\opsi.org\opsi-client-agent\opsi-winst\winst32.exe"]
[1] [Feb 03 22:15:52:525] system infos:
[1] [Feb 03 22:15:52:538] 00-0C-29-2D-F4-DA  -  PC hardware address
[1] [Feb 03 22:15:52:538] WKS-TEST-VM01.widex.local  -  IP name 
[1] [Feb 03 22:15:52:538] 192.168.89.99  -  IP address
[1] [Feb 03 22:15:52:538] DES  -  System default locale 
[1] [Feb 03 22:15:52:538] MS Windowds 6.1 32 Bit
[1] [Feb 03 22:15:52:538] opsi service version : 4
[1] [Feb 03 22:15:52:538] 
[6] [Feb 03 22:15:52:539] Registry key [HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion]  opened
[6] [Feb 03 22:15:52:539] Key closed
[6] [Feb 03 22:15:52:643] opsi-winst has version  4.11.3.3, required is : >= 4.10.5
[5] [Feb 03 22:15:52:644] 
[5] [Feb 03 22:15:52:644] Set  $LogDir$ = "C:\tmp"
[6] [Feb 03 22:15:52:644]   The value of the variable "$LogDir$" is now: "C:\tmp"
[5] [Feb 03 22:15:52:644] 
[5] [Feb 03 22:15:52:644] Set  $OS$ = GetMsVersionInfo
[6] [Feb 03 22:15:52:644]   The value of the variable "$OS$" is now: "6.1"
[5] [Feb 03 22:15:52:644] 
[5] [Feb 03 22:15:52:644] Set  $SystemType$ = GetSystemType
[6] [Feb 03 22:15:52:644]   The value of the variable "$SystemType$" is now: "x86 System"
[5] [Feb 03 22:15:52:644] 
[5] [Feb 03 22:15:52:644] Set  $DEDE$ = GetProductProperty("DE-DE", "")
[6] [Feb 03 22:15:52:644]   The value of the variable "$DEDE$" is now: "DEDE=1"
[5] [Feb 03 22:15:52:644] 
[5] [Feb 03 22:15:52:644] Set  $ENEN$ = GetProductProperty("EN-EN", "")
[6] [Feb 03 22:15:52:644]   The value of the variable "$ENEN$" is now: "ENEN=1"
[5] [Feb 03 22:15:52:644] 
[5] [Feb 03 22:15:52:644] Set  $FRFR$ = GetProductProperty("FR-FR", "")
[6] [Feb 03 22:15:52:645]   The value of the variable "$FRFR$" is now: "FRFR=1"
[5] [Feb 03 22:15:52:645] 
[5] [Feb 03 22:15:52:645] Set  $ITIT$ = GetProductProperty("IT-IT", "")
[6] [Feb 03 22:15:52:645]   The value of the variable "$ITIT$" is now: "ITIT=1"
[5] [Feb 03 22:15:52:645] 
[5] [Feb 03 22:15:52:645] Set  $ENEB$ = GetProductProperty("EN-EB", "")
[6] [Feb 03 22:15:52:645]   The value of the variable "$ENEB$" is now: "ENEB=0"
[5] [Feb 03 22:15:52:645] 
[5] [Feb 03 22:15:52:645] Set  $Default-Language$ = GetProductProperty("Default-Language", "")
[6] [Feb 03 22:15:52:645]   The value of the variable "$Default-Language$" is now: "DEDE"
[5] [Feb 03 22:15:52:645] 
[5] [Feb 03 22:15:52:645] Set  $Autoupdate$ = GetProductProperty("Autoupdate", "")
[6] [Feb 03 22:15:52:645]   The value of the variable "$Autoupdate$" is now: "AUTOMATICUPDATE=0"
[5] [Feb 03 22:15:52:645] 
[5] [Feb 03 22:15:52:645] Set  $ProductId$       = "Compass GPS"
[6] [Feb 03 22:15:52:645]   The value of the variable "$ProductId$" is now: "Compass GPS"
[5] [Feb 03 22:15:52:646] 
[5] [Feb 03 22:15:52:646] Set  $MinimumSpace$    = "540 MB"
[6] [Feb 03 22:15:52:646]   The value of the variable "$MinimumSpace$" is now: "540 MB"
[5] [Feb 03 22:15:52:646] 
[5] [Feb 03 22:15:52:646] Set  $InstallDir$      = "C:\Program Files\Widex\CompassGPS"
[6] [Feb 03 22:15:52:646]   The value of the variable "$InstallDir$" is now: "C:\Program Files\Widex\CompassGPS"
[5] [Feb 03 22:15:52:646] 
[5] [Feb 03 22:15:52:646] Set  $InstallId$		  = '{87AAE664-634C-4DC1-9888-AD4AD1717A5C}'
[6] [Feb 03 22:15:52:646]   The value of the variable "$InstallId$" is now: "{87AAE664-634C-4DC1-9888-AD4AD1717A5C}"
[5] [Feb 03 22:15:52:646] 
[5] [Feb 03 22:15:52:646] Set  $UninstallDir$	  = "C:\Program Files\InstallShield Installation Information\" + $InstallId$
[6] [Feb 03 22:15:52:646]   The value of the variable "$UninstallDir$" is now: "C:\Program Files\InstallShield Installation Information\{87AAE664-634C-4DC1-9888-AD4AD1717A5C}"
[5] [Feb 03 22:15:52:646] 
[5] [Feb 03 22:15:52:646] Set  $setupstring$ = "/passive " + $DEDE$ + " " + $ENEN$ + " " + $FRFR$ + " " + $ITIT$ + " " + "LANGUAGE_SELECTED=" + $Default-Language$ + " " + $Autoupdate$
[6] [Feb 03 22:15:52:646]   The value of the variable "$setupstring$" is now: "/passive DEDE=1 ENEN=1 FRFR=1 ITIT=1 LANGUAGE_SELECTED=DEDE AUTOMATICUPDATE=0"
[5] [Feb 03 22:15:52:646] 
[5] [Feb 03 22:15:52:646] If
[6] [Feb 03 22:15:52:647]     Free on Disk C:: 34.144.628.736 bytes  This is more than the required amount of 540.000.000 bytes
[5] [Feb 03 22:15:52:647]   HasMinimumSpace ("C:", $MinimumSpace$)   <<< result true
[5] [Feb 03 22:15:52:647]   not(HasMinimumSpace ("C:", $MinimumSpace$))   <<< result false
[5] [Feb 03 22:15:52:647] Then
[5] [Feb 03 22:15:52:647] 
[5] [Feb 03 22:15:52:647] Else
[5] [Feb 03 22:15:52:647]   comment: Show product picture
[5] [Feb 03 22:15:52:660]   
[5] [Feb 03 22:15:52:660]   If
[6] [Feb 03 22:15:52:660]       Starting query if file exist ...
[5] [Feb 03 22:15:52:664]       "P:\compass-gps\delsub1.ins": File Error 2 (Das System kann die angegebene Datei nicht finden.<)
[5] [Feb 03 22:15:52:664]     FileExists("P:\compass-gps\delsub1.ins")   <<< result false
[5] [Feb 03 22:15:52:664]   Then
[5] [Feb 03 22:15:52:664]   EndIf
[5] [Feb 03 22:15:52:665]   message Installiere Compass GPS ...
[5] [Feb 03 22:15:52:668]   
[5] [Feb 03 22:15:52:668]   If
[5] [Feb 03 22:15:52:668]     $OS$ <= "5.2"   <<< result false
[5] [Feb 03 22:15:52:668]     ($OS$ <= "5.2")   <<< result false
[5] [Feb 03 22:15:52:668]   Then
[5] [Feb 03 22:15:52:668]   
[5] [Feb 03 22:15:52:668]   Else
[5] [Feb 03 22:15:52:668]     
[5] [Feb 03 22:15:52:668]     If
[5] [Feb 03 22:15:52:668]       $SystemType$ = "64 Bit System"   <<< result false
[5] [Feb 03 22:15:52:668]       ($SystemType$ = "64 Bit System")   <<< result false
[5] [Feb 03 22:15:52:668]     Then
[5] [Feb 03 22:15:52:668]     
[5] [Feb 03 22:15:52:668]     Else
[5] [Feb 03 22:15:52:668]       comment: Start setup program
[5] [Feb 03 22:15:52:669]       
[5] [Feb 03 22:15:52:669]       Execution of Winbatch_install_win7
[6] [Feb 03 22:15:52:671]         Call "P:\compass-gps\files\setup.exe /S /v"/passive DEDE=1 ENEN=1 FRFR=1 ITIT=1 LANGUAGE_SELECTED=DEDE AUTOMATICUPDATE=0""
[6] [Feb 03 22:15:52:671]            Waiting until the called process is finished
[6] [Feb 03 22:15:52:673]         Start process as invoker: SYSTEM
[6] [Feb 03 22:15:57:085]         ExitCode 1624    Executed process "P:\compass-gps\files\setup.exe /S /v"/passive DEDE=1 ENEN=1 FRFR=1 ITIT=1 LANGUAGE_SELECTED=DEDE AUTOMATICUPDATE=0""
[6] [Feb 03 22:15:57:087]         Call "P:\compass-gps\files\setup.exe /S /v" /passive DEDE=1 FRFR=1 ITIT=1 LANGUAGE_SELECTED=DEDE DISTRIBUTOR=70373 ISSHOWMSILOG=1 AUTOMATICUPDATE=0""
[6] [Feb 03 22:15:57:087]            Waiting until the called process is finished
[6] [Feb 03 22:15:57:089]         Start process as invoker: SYSTEM
[6] [Feb 03 22:16:01:499]         ExitCode 1624    Executed process "P:\compass-gps\files\setup.exe /S /v" /passive DEDE=1 FRFR=1 ITIT=1 LANGUAGE_SELECTED=DEDE DISTRIBUTOR=70373 ISSHOWMSILOG=1 AUTOMATICUPDATE=0""
[6] [Feb 03 22:16:01:502]       
[6] [Feb 03 22:16:01:502]       ~~~~~~~ Start Sub ~~~~~~~  Sub_check_exitcode
[5] [Feb 03 22:16:01:504]       comment: Test for installation success via exit code
[5] [Feb 03 22:16:01:504]       
[5] [Feb 03 22:16:01:504]       Set  $ExitCode$ = getLastExitCode
[6] [Feb 03 22:16:01:504]         The value of the variable "$ExitCode$" is now: "1624"
[5] [Feb 03 22:16:01:504]       
[5] [Feb 03 22:16:01:504]       If
[5] [Feb 03 22:16:01:504]         $ExitCode$ = "0"   <<< result false
[5] [Feb 03 22:16:01:504]         ($ExitCode$ = "0")   <<< result false
[5] [Feb 03 22:16:01:504]       Then
[5] [Feb 03 22:16:01:504]       
[5] [Feb 03 22:16:01:504]       Else
[5] [Feb 03 22:16:01:504]         comment: Setup program gives a exitcode unequal zero: 1624
[5] [Feb 03 22:16:01:504]         
[5] [Feb 03 22:16:01:504]         If
[5] [Feb 03 22:16:01:504]           $ExitCode$ = "1605"   <<< result false
[5] [Feb 03 22:16:01:504]           ($ExitCode$ = "1605")   <<< result false
[5] [Feb 03 22:16:01:504]         Then
[5] [Feb 03 22:16:01:504]         
[5] [Feb 03 22:16:01:504]         Else
[5] [Feb 03 22:16:01:504]           
[5] [Feb 03 22:16:01:504]           If
[5] [Feb 03 22:16:01:504]             $ExitCode$ = "1641"   <<< result false
[5] [Feb 03 22:16:01:504]             ($ExitCode$ = "1641")   <<< result false
[5] [Feb 03 22:16:01:504]           Then
[5] [Feb 03 22:16:01:504]           
[5] [Feb 03 22:16:01:504]           Else
[5] [Feb 03 22:16:01:504]             
[5] [Feb 03 22:16:01:505]             If
[5] [Feb 03 22:16:01:505]               $ExitCode$ = "3010"   <<< result false
[5] [Feb 03 22:16:01:505]               ($ExitCode$ = "3010")   <<< result false
[5] [Feb 03 22:16:01:505]             Then
[5] [Feb 03 22:16:01:505]             
[5] [Feb 03 22:16:01:505]             Else
[3] [Feb 03 22:16:01:505]               Error: Fatal: Setup program gives an unknown exitcode unequal zero: 1624
[5] [Feb 03 22:16:01:505]               Error level set to fatal
[5] [Feb 03 22:16:01:505]               Process aborted
[6] [Feb 03 22:16:01:505]       
[6] [Feb 03 22:16:01:505]       ~~~~~~~ End Sub   ~~~~~~~  Sub_check_exitcode
[6] [Feb 03 22:16:01:505]       
[5] [Feb 03 22:16:01:505]       Process aborted
[1] [Feb 03 22:16:01:505] ___________________
[1] [Feb 03 22:16:01:505] script finished
[1] [Feb 03 22:16:01:505] 1 error
[1] [Feb 03 22:16:01:505] 0 warnings
[1] [Feb 03 22:16:01:505] 
[1] [Feb 03 22:16:01:505] installed product: compass-gps Version: 1.0-1
[1] [Feb 03 22:16:01:505] 
[6] [Feb 03 22:16:01:506] Delete "c:\opsi.org\tmp\_winstbat_*"
[6] [Feb 03 22:16:01:506]   Search "c:\opsi.org\tmp\"
[6] [Feb 03 22:16:01:506] JSON service request https://192.168.89.9:4447/rpc setProductActionRequest
[6] [Feb 03 22:16:01:655] JSON Bench for setProductActionRequest "params":["compass-gps","wks-test-vm01.widex.local Start: 22:16:01:506 Time: 00:00:00:149
[1] [Feb 03 22:16:01:659] product "compass-gps set to update
[1] [Feb 03 22:16:01:659] Update script name: 
[5] [Feb 03 22:16:01:659] no script file name given
[1] [Feb 03 22:16:01:659] we have no update script
[6] [Feb 03 22:16:01:660] JSON service request https://192.168.89.9:4447/rpc productOnClient_updateObject
[6] [Feb 03 22:16:01:767] JSON Bench for productOnClient_updateObject "params":[{"clientId":"wks-test-vm01.widex.local", Start: 22:16:01:660 Time: 00:00:00:107
[6] [Feb 03 22:16:01:772] Registry key [HKLM\SOFTWARE\opsi.org\winst]  opened
[6] [Feb 03 22:16:01:772]                 Variable "RebootRequested"  is keeping its value "0"
[6] [Feb 03 22:16:01:772]                 Variable "LastLogFilename"  is keeping its value "c:\tmp\instlog.txt"
[6] [Feb 03 22:16:01:772]                 Variable "ContinueLogFile"  is keeping its value "0"
[6] [Feb 03 22:16:01:773]                 Variable "NumberOfErrors"  is keeping its value "0"
[6] [Feb 03 22:16:01:784]                 Key flushed
[6] [Feb 03 22:16:01:784]                 Key closed
[5] [Feb 03 22:16:01:790] -------- submitted part of log file ends here, see the rest of log file on client ----------

Re: setup.exe aufruf MSI, Parameter übergabe

Verfasst: 04 Feb 2013, 09:42
von koepkek
Hallo

als erstes fällt mir auf, dass es zwischen der verwendeten ProduktID im Script und im Logfile Unterschiede gibt. Bitte keine Leerzeichen , Umlaute und Großbuchstaben verwenden.
;$ProductId$ should be the name of the product in opsi
; therefore please: only lower letters, no umlauts,
; no white space use ’-’ as a seperator

Dann gibt es einen Exitcode, der bei der Suche im Netz auf dieses Forum und folgende Meldung hinweist

if ($ExitCode$ = "1624")
setLogLevel = 5
logError "ExitCode = "+$ExitCode$+" ERROR_INSTALL_TRANSFORM_FAILURE Error applying transforms. Verify that the specified transform paths are valid."
isFatalError
Kann man die Aufrufparameter auch in einen Transformfile packen?

Gruß Karsten Köpke

Re: setup.exe aufruf MSI, Parameter übergabe

Verfasst: 04 Feb 2013, 11:41
von rabadag
Merci für deine Nachricht.
Daran liegt es aber nicht. Habe den Fehler gefunden, liegt nicht am script oder opsi.

Das setup.exe Programm das gestartet wird, ruft noch mst fils auf um bestehende msi zu patchen.

DOS KONSOLE:
Jede Sprache ist eine eigene MSI Datei im Unterordner.
Die MST Daten liegen im root Verzeichnis.
Ergebnisse Funktioniert

MIT OPSI:
Jede Sprache ist eine eigene MSI Datei im Unterordner.
Die MST Daten liegen im root Verzeichnis.
Der Fehler ist, das die Setup.exe die MST im Unterverzeichnis sucht und nicht im root, so wie es eigentlich auf
der Original Installation Medium ist.

MIT OPSI und MST verschoben.
Jede Sprache ist eine eigene MSI Datei im Unterordner.
Die MST Daten liegen im selben Ordner wie die MSI.
Ergebnis OK



Warum bei manuelle Ausführung die mst im root gefunden werden und via opsi nur im Unterverzeichnis kann ich mir nicht erklären.
vielleicht hat jemand von euch eine ide warum das so ist.

Re: setup.exe aufruf MSI, Parameter übergabe

Verfasst: 06 Feb 2013, 16:11
von d.oertel
Hi,

schon mal versucht vor dem winbatch Aufruf ein

Code: Alles auswählen

ChangeDirectory <directory>
zu setzen ?

Ändert das was ?

gruß
d.oertel

Re: setup.exe aufruf MSI, Parameter übergabe

Verfasst: 08 Feb 2013, 14:41
von rabadag
Dank für die info.

Das habe ich noch nicht getestet, werde ich bei Gelegenheit mal machen und Bescheid geben.
Alle Zeiten sind UTC+02:00
Seite 1 von 1

Powered by phpBB® Forum Software © phpBB Limited

Deutsche Übersetzung durch phpBB.de