forum.opsi.org

After integrating new drivers into the Windows 7 netboot product, the installation now fails in STARTNET.CMD with:

Waiting for network...
Mountresult: 1231: Can't reach destination..

The error seams to affect all computers (all 2 we are testing on)

I did the following to integrate the new drivers (from driverpacks.net):

Copied the drivers /opt/pcbin/install/win7-x64/drivers/drivers/ in new catalogs.

Changed to /opt/pcbin/install/win7-x64/ on the server and ran:

opsi-setup –set-rights ./drivers
./create_driver_links.py

Have I done anything wrong ? The drivers seems to be loaded onto the Windows PC.

do you put them into prefered?

please post the output vom show_drivers.py

No I placed them in ,/drivers/drivers/ in a new catalog called driverpacks.

Output from show_drivers.py:

PCI-Devices
[8086:1C20] Intel Corporation : 6 Series/C200 Series Chipset Family High Definition Audio Controller
/opt/pcbin/install/win7-x64/drivers/drivers/driverpacks/x64chipset/Win7/C/Intel/1
[8086:1C10] Intel Corporation : 6 Series/C200 Series Chipset Family PCI Express Root Port 1
/opt/pcbin/install/win7-x64/drivers/drivers/driverpacks/x64chipset/Win7/C/Intel/1
[8086:1C12] Intel Corporation : 6 Series/C200 Series Chipset Family PCI Express Root Port 2
/opt/pcbin/install/win7-x64/drivers/drivers/driverpacks/x64chipset/Win7/C/Intel/1
[8086:0085] Intel Corporation : Centrino Advanced-N 6205
/opt/pcbin/install/win7-x64/drivers/drivers/driverpacks/x64wlan/Win7/W/Intel/2
[8086:1C16] Intel Corporation : 6 Series/C200 Series Chipset Family PCI Express Root Port 4
/opt/pcbin/install/win7-x64/drivers/drivers/driverpacks/x64chipset/Win7/C/Intel/1
[8086:1C18] Intel Corporation : 6 Series/C200 Series Chipset Family PCI Express Root Port 5
/opt/pcbin/install/win7-x64/drivers/drivers/driverpacks/x64chipset/Win7/C/Intel/1
[1180:E823] Ricoh Co Ltd : PCIe SDXC/MMC Host Controller
/opt/pcbin/install/win7-x64/drivers/drivers/driverpacks/x64cardreaders/3/Cardreaders/Ricoh/1
[8086:1C26] Intel Corporation : 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1
/opt/pcbin/install/win7-x64/drivers/drivers/driverpacks/x64chipset/Win7/C/Intel/1
[8086:1C4F] Intel Corporation : QM67 Express Chipset Family LPC Controller
/opt/pcbin/install/win7-x64/drivers/drivers/driverpacks/x64chipset/Win7/C/Intel/1
[8086:1C03] Intel Corporation : 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller
/opt/pcbin/install/win7-x64/drivers/drivers/driverpacks/x64massstorage/All/M/Intel/2 (textmode capable)
This driver will not be integrated, because same device already integrated in: '/opt/pcbin/install/win7-x64/drivers/drivers/driverpacks/x64chipset/Win7/C/Intel/1/cougahci.inf'
[8086:1C22] Intel Corporation : 6 Series/C200 Series Chipset Family SMBus Controller
/opt/pcbin/install/win7-x64/drivers/drivers/driverpacks/x64chipset/Win7/C/Intel/1
[8086:0104] Intel Corporation : 2nd Generation Core Processor Family DRAM Controller
/opt/pcbin/install/win7-x64/drivers/drivers/driverpacks/x64chipset/Win7/C/Intel/1
[8086:0126] Intel Corporation : 2nd Generation Core Processor Family Integrated Graphics Controller
/opt/pcbin/install/win7-x64/drivers/drivers/driverpacks/x64graphics/B/All/G_B/Intel/4
[8086:1C3A] Intel Corporation : 6 Series/C200 Series Chipset Family MEI Controller #1
/opt/pcbin/install/win7-x64/drivers/drivers/driverpacks/x64chipset/Win7/C/Intel/1
[8086:1C3D] Intel Corporation : 6 Series/C200 Series Chipset Family KT Controller
/opt/pcbin/install/win7-x64/drivers/drivers/driverpacks/x64chipset/All/C/Intel/MEI/7
[8086:1502] Intel Corporation : 82579LM Gigabit Network Connection
/opt/pcbin/install/win7-x64/drivers/drivers/driverpacks/x64lan/Win7/L/Intel/2/NDIS62
[8086:1C2D] Intel Corporation : 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2
/opt/pcbin/install/win7-x64/drivers/drivers/driverpacks/x64chipset/Win7/C/Intel/1

USB-Devices
[0A5C:217F] Broadcom Corp. : Broadcom Bluetooth Device
No driver - vendor directory '/opt/pcbin/install/win7-x64/drivers/usbids/0A5C' not found
[147E:2016] Upek : Biometric Coprocessor
No driver - vendor directory '/opt/pcbin/install/win7-x64/drivers/usbids/147E' not found
[8087:0024] Unknown vendor : Unknown device
No driver - device directory '/opt/pcbin/install/win7-x64/drivers/usbids/8087/0024' not found

HD-Audio-Devices
[14F1:506E] Conexant CX20590
No driver - device directory '/opt/pcbin/install/win7-x64/drivers/hdaudioids/14F1/506E' not found
[8086:2805] Intel CougarPoint HDMI
/opt/pcbin/install/win7-x64/drivers/drivers/driverpacks/x64graphics/B/All/G_B/Intel/4

do you have DELL Clients? The problem ist, that DELL Clients sometimes need additional drivers for Windows PE.
You can include the PE Drivers directly in the windows PE image.

you can also try to use the new ByAudit Feature. Look at the hardware inventory of your client. You need the Vendor ID and the Model ID.

Go to drivers/drivers/additional/ create a folder named "byAudit" in this folder you need one named like your vendor and in this folder you need one folder named like your model

for example: You have a Dell Latitude E6500
Create under byAudit a Folder named "Dell Inc." (you can create folders with a dot via Terminal) inside this folder you must create a folder "Latitude E6500"

run a set-rights and create_driver_links.

No we have Lenovo clients, and they installed "fine" (with a lot of drivers missing) before I integrated new drivers into OPSI.

okay. Then look at this driver:
[8086:1502] Intel Corporation : 82579LM Gigabit Network Connection
/opt/pcbin/install/win7-x64/drivers/drivers/driverpacks/x64lan/Win7/L/Intel/2/NDIS62

remove this driver from your driver folder and recreate the driver links.

Unfortunately that did not sovle the problem.

Now it first says

Waiting for network...
Mountresult: 53:

and after the same again and again

Waiting for network...
Mountresult: 1231:

look at the lenovo download page for Windows PE drivers.

can you ping from the CMD of the PE?

ping works, but only for 127.0.0.1

ipconfig show no configured network, it seems like it did not get a IP from DHCP even as it just used it to boot the first part of the installation.

I if run ipconfig /renew from the PE CMD, I can see in the DHCP logs

DHCPOFFER
DHCPDISCOVER

but the client PC newer returns the DHCPREQUEST so ipconfig just times out ?