Hallo Herr Oertel,
also ich habe meinen Opsi-Server die IP 192.168.2.100 gegeben DNS ist 192.168.2.1 genauso der gateway 192.168.2.1
hier die Logdatei von dem Client:
Jul 06 17:40:54 [opsiinit] opsi init script started
Jul 06 17:40:54 [opsiinit] getBootParam(no_dhcp): cmdline: lang=de video=vesa:ywrap,mtrr pckey=******************************** service=192.168.4.40 vga=791 initrd=miniroot.gz reboot=b noapic init=/etc/init quiet hn=xp2 ramdisk_size=175880 product=hwinvent splash BOOT_IMAGE=install
Jul 06 17:40:54 [opsiinit] boot param nodhcp=0
Jul 06 17:40:54 [opsiinit] getBootParam(hn): cmdline: lang=de video=vesa:ywrap,mtrr pckey=******************************** service=192.168.4.40 vga=791 initrd=miniroot.gz reboot=b noapic init=/etc/init quiet hn=xp2 ramdisk_size=175880 product=hwinvent splash BOOT_IMAGE=install
Jul 06 17:40:54 [opsiinit] boot param hn=xp2
Jul 06 17:40:54 [opsiinit] getBootParam(lang): cmdline: lang=de video=vesa:ywrap,mtrr pckey=******************************** service=192.168.4.40 vga=791 initrd=miniroot.gz reboot=b noapic init=/etc/init quiet hn=xp2 ramdisk_size=175880 product=hwinvent splash BOOT_IMAGE=install
Jul 06 17:40:54 [opsiinit] boot param lang=de
Jul 06 17:40:54 [opsiinit] loading keymap de
Jul 06 17:40:54 [opsiinit] setting language environment (LANG=de_DE.UTF8, LANGUAGE=de, LC_ALL=de_DE.UTF8)
Jul 06 17:40:54 [opsiinit] getNetworkDevices(): link forced
Jul 06 17:40:54 [opsiinit] getNetworkDevices(): device(s) found: eth0, device(s) with link:
Jul 06 17:40:54 [opsiinit] getNetworkDevices(): no devices with link found, returning error
Jul 06 17:40:54 [opsiinit] no devices found, sleeping 3 seconds
Jul 06 17:40:56 [info] Locale not found: name 'LOCALE_DIR' is not defined
Jul 06 17:40:56 [info] Locale not found: [Errno 2] No translation file found for domain: 'product'
Jul 06 17:40:56 [debug] Executing: echo 0 > /proc/sys/kernel/printk
Jul 06 17:40:56 [debug] Exit code: 0
Jul 06 17:40:56 [debug] Command 'tty' found: '/usr/bin/tty'
Jul 06 17:40:56 [debug] Executing: setterm -msg off -blank 0 -powersave off < /dev/tty6 > /dev/tty6
Jul 06 17:40:57 [debug] Exit code: 0
Jul 06 17:40:57 [info] Waiting for init scripts to finish up (0)
Jul 06 17:40:58 [opsiinit] getNetworkDevices(): link forced
Jul 06 17:40:58 [info] Waiting for init scripts to finish up (1)
Jul 06 17:40:58 [opsiinit] getNetworkDevices(): device(s) found: eth0, device(s) with link:
Jul 06 17:40:58 [opsiinit] getNetworkDevices(): no devices with link found, returning error
Jul 06 17:40:58 [opsiinit] no devices found, sleeping 3 seconds
Jul 06 17:40:59 [info] Waiting for init scripts to finish up (2)
Jul 06 17:41:00 [info] Waiting for init scripts to finish up (3)
Jul 06 17:41:01 [info] Waiting for init scripts to finish up (4)
Jul 06 17:41:01 [opsiinit] getNetworkDevices(): link forced
Jul 06 17:41:01 [opsiinit] getNetworkDevices(): device(s) found: eth0, device(s) with link:
Jul 06 17:41:01 [opsiinit] getNetworkDevices(): no devices with link found, returning error
Jul 06 17:41:01 [opsiinit] no devices found, sleeping 3 seconds
Jul 06 17:41:02 [info] Waiting for init scripts to finish up (5)
Jul 06 17:41:03 [info] Waiting for init scripts to finish up (6)
Jul 06 17:41:04 [info] Waiting for init scripts to finish up (7)
Jul 06 17:41:04 [opsiinit] getNetworkDevices(): device(s) found: eth0, device(s) with link:
Jul 06 17:41:04 [opsiinit] getNetworkDevices(): no devices with link found, returning eth0
Jul 06 17:41:04 [opsiinit] using dhcp, adding entry for device eth0 to /etc/network/interfaces
Jul 06 17:41:05 [info] Waiting for init scripts to finish up (8)
Jul 06 17:41:06 [info] Waiting for init scripts to finish up (9)
Jul 06 17:41:06 [opsiinit] Setting hostname to xp2 as supplied by cmdline
Jul 06 17:41:06 [opsiinit] opsi init script ended
Jul 06 17:41:07 [info] Waiting for init scripts to finish up (10)
Jul 06 17:41:08 [info] Waiting for init scripts to finish up (11)
Jul 06 17:41:09 [info] Waiting for init scripts to finish up (12)
Jul 06 17:41:10 [debug] Executing: dmesg
Jul 06 17:41:10 [debug] ->>> Linux version 2.6.25.4 (root@pcbon14) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP PREEMPT Wed Jun 4 14:04:51 UTC 2008
Jul 06 17:41:10 [debug] ->>> BIOS-provided physical RAM map:
Jul 06 17:41:10 [debug] ->>> BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
Jul 06 17:41:10 [debug] ->>> BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
Jul 06 17:41:10 [debug] ->>> BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
Jul 06 17:41:10 [debug] ->>> BIOS-e820: 0000000000100000 - 000000000fef0000 (usable)
Jul 06 17:41:10 [debug] ->>> BIOS-e820: 000000000fef0000 - 000000000feff000 (ACPI data)
Jul 06 17:41:10 [debug] ->>> BIOS-e820: 000000000feff000 - 000000000ff00000 (ACPI NVS)
Jul 06 17:41:10 [debug] ->>> BIOS-e820: 000000000ff00000 - 0000000010000000 (usable)
Jul 06 17:41:10 [debug] ->>> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
Jul 06 17:41:10 [debug] ->>> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
Jul 06 17:41:10 [debug] ->>> BIOS-e820: 00000000fffe0000 - 0000000100000000 (reserved)
Jul 06 17:41:10 [debug] ->>> 0MB HIGHMEM available.
Jul 06 17:41:10 [debug] ->>> 256MB LOWMEM available.
Jul 06 17:41:10 [debug] ->>> Scan SMP from c0000000 for 1024 bytes.
Jul 06 17:41:10 [debug] ->>> Scan SMP from c009fc00 for 1024 bytes.
Jul 06 17:41:10 [debug] ->>> Scan SMP from c00f0000 for 65536 bytes.
Jul 06 17:41:10 [debug] ->>> found SMP MP-table at [c00f6cd0] 000f6cd0
Jul 06 17:41:10 [debug] ->>> Entering add_active_range(0, 0, 65536) 0 entries of 256 used
Jul 06 17:41:10 [debug] ->>> Zone PFN ranges:
Jul 06 17:41:10 [debug] ->>> DMA 0 -> 4096
Jul 06 17:41:10 [debug] ->>> Normal 4096 -> 65536
Jul 06 17:41:10 [debug] ->>> HighMem 65536 -> 65536
Jul 06 17:41:10 [debug] ->>> Movable zone start PFN for each node
Jul 06 17:41:10 [debug] ->>> early_node_map[1] active PFN ranges
Jul 06 17:41:10 [debug] ->>> 0: 0 -> 65536
Jul 06 17:41:10 [debug] ->>> On node 0 totalpages: 65536
Jul 06 17:41:10 [debug] ->>> DMA zone: 32 pages used for memmap
Jul 06 17:41:10 [debug] ->>> DMA zone: 0 pages reserved
Jul 06 17:41:10 [debug] ->>> DMA zone: 4064 pages, LIFO batch:0
Jul 06 17:41:10 [debug] ->>> Normal zone: 480 pages used for memmap
Jul 06 17:41:10 [debug] ->>> Normal zone: 60960 pages, LIFO batch:15
Jul 06 17:41:10 [debug] ->>> HighMem zone: 0 pages used for memmap
Jul 06 17:41:10 [debug] ->>> Movable zone: 0 pages used for memmap
Jul 06 17:41:10 [debug] ->>> DMI present.
Jul 06 17:41:10 [debug] ->>> ACPI: RSDP 000F6C60, 0014 (r0 PTLTD )
Jul 06 17:41:10 [debug] ->>> ACPI: RSDT 0FEFAB68, 0030 (r1 PTLTD RSDT 6040000 LTP 0)
Jul 06 17:41:10 [debug] ->>> ACPI: FACP 0FEFEF14, 0074 (r1 INTEL 440BX 6040000 PTL F4240)
Jul 06 17:41:10 [debug] ->>> ACPI: DSDT 0FEFAB98, 437C (r1 PTLTD Custom 6040000 MSFT 100000D)
Jul 06 17:41:10 [debug] ->>> ACPI: FACS 0FEFFFC0, 0040
Jul 06 17:41:10 [debug] ->>> ACPI: APIC 0FEFEF88, 0050 (r1 PTLTD APIC 6040000 LTP 0)
Jul 06 17:41:10 [debug] ->>> ACPI: BOOT 0FEFEFD8, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
Jul 06 17:41:10 [debug] ->>> ACPI: PM-Timer IO Port: 0x1008
Jul 06 17:41:10 [debug] ->>> ACPI: Local APIC address 0xfee00000
Jul 06 17:41:10 [debug] ->>> ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Jul 06 17:41:10 [debug] ->>> Processor #0 15:3 APIC version 17
Jul 06 17:41:10 [debug] ->>> ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
Jul 06 17:41:10 [debug] ->>> ACPI: Skipping IOAPIC probe due to 'noapic' option.
Jul 06 17:41:10 [debug] ->>> Using ACPI for processor (LAPIC) configuration information
Jul 06 17:41:10 [debug] ->>> Intel MultiProcessor Specification v1.4
Jul 06 17:41:10 [debug] ->>> Virtual Wire compatibility mode.
Jul 06 17:41:10 [debug] ->>> OEM ID: INTEL Product ID: 440BX APIC at: 0xFEE00000
Jul 06 17:41:10 [debug] ->>> I/O APIC #1 Version 17 at 0xFEC00000.
Jul 06 17:41:10 [debug] ->>> Enabling APIC mode: Flat. Using 1 I/O APICs
Jul 06 17:41:10 [debug] ->>> Processors: 1
Jul 06 17:41:10 [debug] ->>> Allocating PCI resources starting at 20000000 (gap: 10000000:eec00000)
Jul 06 17:41:10 [debug] ->>> Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024
Jul 06 17:41:10 [debug] ->>> Kernel command line: lang=de video=vesa:ywrap,mtrr pckey=******************************** service=192.168.4.40 vga=791 initrd=miniroot.gz reboot=b noapic init=/etc/init quiet hn=xp2 ramdisk_size=175880 product=hwinvent splash BOOT_IMAGE=install
Jul 06 17:41:10 [debug] ->>> mapped APIC to ffffb000 (fee00000)
Jul 06 17:41:10 [debug] ->>> mapped IOAPIC to ffffa000 (fec00000)
Jul 06 17:41:10 [debug] ->>> Enabling fast FPU save and restore... done.
Jul 06 17:41:10 [debug] ->>> Enabling unmasked SIMD FPU exception support... done.
Jul 06 17:41:10 [debug] ->>> Initializing CPU#0
Jul 06 17:41:10 [debug] ->>> PID hash table entries: 1024 (order: 10, 4096 bytes)
Jul 06 17:41:10 [debug] ->>> Detected 3021.065 MHz processor.
Jul 06 17:41:10 [debug] ->>> Console: colour dummy device 80x25
Jul 06 17:41:10 [debug] ->>> console [tty0] enabled
Jul 06 17:41:10 [debug] ->>> Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Jul 06 17:41:10 [debug] ->>> Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Jul 06 17:41:10 [debug] ->>> Memory: 196952k/262144k available (2271k kernel code, 64592k reserved, 802k data, 352k init, 0k highmem)
Jul 06 17:41:10 [debug] ->>> virtual kernel memory layout:
Jul 06 17:41:10 [debug] ->>> fixmap : 0xffe14000 - 0xfffff000 (1964 kB)
Jul 06 17:41:10 [debug] ->>> pkmap : 0xff800000 - 0xffc00000 (4096 kB)
Jul 06 17:41:10 [debug] ->>> vmalloc : 0xd0800000 - 0xff7fe000 ( 751 MB)
Jul 06 17:41:10 [debug] ->>> lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
Jul 06 17:41:10 [debug] ->>> .init : 0xc0407000 - 0xc045f000 ( 352 kB)
Jul 06 17:41:10 [debug] ->>> .data : 0xc0337e78 - 0xc0400900 ( 802 kB)
Jul 06 17:41:10 [debug] ->>> .text : 0xc0100000 - 0xc0337e78 (2271 kB)
Jul 06 17:41:10 [debug] ->>> Checking if this processor honours the WP bit even in supervisor mode...Ok.
Jul 06 17:41:10 [debug] ->>> CPA: page pool initialized 1 of 1 pages preallocated
Jul 06 17:41:10 [debug] ->>> Calibrating delay using timer specific routine.. 6069.69 BogoMIPS (lpj=12139398)
Jul 06 17:41:10 [debug] ->>> Mount-cache hash table entries: 512
Jul 06 17:41:10 [debug] ->>> CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
Jul 06 17:41:10 [debug] ->>> CPU: L2 Cache: 1024K (64 bytes/line)
Jul 06 17:41:10 [debug] ->>> Intel machine check architecture supported.
Jul 06 17:41:10 [debug] ->>> Intel machine check reporting enabled on CPU#0.
Jul 06 17:41:10 [debug] ->>> Compat vDSO mapped to ffffe000.
Jul 06 17:41:10 [debug] ->>> Checking 'hlt' instruction... OK.
Jul 06 17:41:10 [debug] ->>> SMP alternatives: switching to UP code
Jul 06 17:41:10 [debug] ->>> Freeing SMP alternatives: 9k freed
Jul 06 17:41:10 [debug] ->>> ACPI: Core revision 20070126
Jul 06 17:41:10 [debug] ->>> ACPI: setting ELCR to 0200 (from 0e20)
Jul 06 17:41:10 [debug] ->>> CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ stepping 03
Jul 06 17:41:10 [debug] ->>> Total of 1 processors activated (6069.69 BogoMIPS).
Jul 06 17:41:10 [debug] ->>> Brought up 1 CPUs
Jul 06 17:41:10 [debug] ->>> CPU0 attaching NULL sched-domain.
Jul 06 17:41:10 [debug] ->>> net_namespace: 160 bytes
Jul 06 17:41:10 [debug] ->>> NET: Registered protocol family 16
Jul 06 17:41:10 [debug] ->>> EISA bus registered
Jul 06 17:41:10 [debug] ->>> ACPI: bus type pci registered
Jul 06 17:41:10 [debug] ->>> PCI: PCI BIOS revision 2.10 entry at 0xfd9a0, last bus=2
Jul 06 17:41:10 [debug] ->>> PCI: Using configuration type 1
Jul 06 17:41:10 [debug] ->>> Setting up standard PCI resources
Jul 06 17:41:10 [debug] ->>> ACPI: EC: Look up EC in DSDT
Jul 06 17:41:10 [debug] ->>> ACPI: Interpreter enabled
Jul 06 17:41:10 [debug] ->>> ACPI: (supports S0 S1 S5)
Jul 06 17:41:10 [debug] ->>> ACPI: Using PIC for interrupt routing
Jul 06 17:41:10 [debug] ->>> ACPI: PCI Root Bridge [PCI0] (0000:00)
Jul 06 17:41:10 [debug] ->>> pci 0000:00:07.3: quirk: region 1000-103f claimed by PIIX4 ACPI
Jul 06 17:41:10 [debug] ->>> pci 0000:00:07.3: quirk: region 1040-104f claimed by PIIX4 SMB
Jul 06 17:41:10 [debug] ->>> PCI: Transparent bridge - 0000:00:11.0
Jul 06 17:41:10 [debug] ->>> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Jul 06 17:41:10 [debug] ->>> ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 14 15)
Jul 06 17:41:10 [debug] ->>> ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 14 15)
Jul 06 17:41:10 [debug] ->>> ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 14 15)
Jul 06 17:41:10 [debug] ->>> ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 14 15)
Jul 06 17:41:10 [debug] ->>> Linux Plug and Play Support v0.97 (c) Adam Belay
Jul 06 17:41:10 [debug] ->>> pnp: PnP ACPI init
Jul 06 17:41:10 [debug] ->>> ACPI: bus type pnp registered
Jul 06 17:41:10 [debug] ->>> pnp: PnP ACPI: found 12 devices
Jul 06 17:41:10 [debug] ->>> ACPI: ACPI bus type pnp unregistered
Jul 06 17:41:10 [debug] ->>> PnPBIOS: Disabled by ACPI PNP
Jul 06 17:41:10 [debug] ->>> SCSI subsystem initialized
Jul 06 17:41:10 [debug] ->>> PCI: Using ACPI for IRQ routing
Jul 06 17:41:10 [debug] ->>> PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
Jul 06 17:41:10 [debug] ->>> system 00:01: ioport range 0x1000-0x103f has been reserved
Jul 06 17:41:10 [debug] ->>> system 00:01: ioport range 0x1040-0x104f has been reserved
Jul 06 17:41:10 [debug] ->>> PCI: Bridge: 0000:00:01.0
Jul 06 17:41:10 [debug] ->>> IO window: disabled.
Jul 06 17:41:10 [debug] ->>> MEM window: disabled.
Jul 06 17:41:10 [debug] ->>> PREFETCH window: disabled.
Jul 06 17:41:10 [debug] ->>> PCI: Bridge: 0000:00:11.0
Jul 06 17:41:10 [debug] ->>> IO window: 2000-2fff
Jul 06 17:41:10 [debug] ->>> MEM window: 0xe8900000-0xe89fffff
Jul 06 17:41:10 [debug] ->>> PREFETCH window: disabled.
Jul 06 17:41:10 [debug] ->>> PCI: Setting latency timer of device 0000:00:01.0 to 64
Jul 06 17:41:10 [debug] ->>> ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
Jul 06 17:41:10 [debug] ->>> PCI: setting IRQ 10 as level-triggered
Jul 06 17:41:10 [debug] ->>> ACPI: PCI Interrupt 0000:00:11.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
Jul 06 17:41:10 [debug] ->>> NET: Registered protocol family 2
Jul 06 17:41:10 [debug] ->>> IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
Jul 06 17:41:10 [debug] ->>> TCP established hash table entries: 8192 (order: 4, 65536 bytes)
Jul 06 17:41:10 [debug] ->>> TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
Jul 06 17:41:10 [debug] ->>> TCP: Hash tables configured (established 8192 bind 8192)
Jul 06 17:41:10 [debug] ->>> TCP reno registered
Jul 06 17:41:10 [debug] ->>> checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Jul 06 17:41:10 [debug] ->>> Freeing initrd memory: 58552k freed
Jul 06 17:41:10 [debug] ->>> Simple Boot Flag at 0x36 set to 0x1
Jul 06 17:41:10 [debug] ->>> audit: initializing netlink socket (disabled)
Jul 06 17:41:10 [debug] ->>> type=2000 audit(1215366026.395:1): initialized
Jul 06 17:41:10 [debug] ->>> Total HugeTLB memory allocated, 0
Jul 06 17:41:10 [debug] ->>> io scheduler noop registered
Jul 06 17:41:10 [debug] ->>> io scheduler anticipatory registered
Jul 06 17:41:10 [debug] ->>> io scheduler deadline registered (default)
Jul 06 17:41:10 [debug] ->>> io scheduler cfq registered
Jul 06 17:41:10 [debug] ->>> pci 0000:00:00.0: Limiting direct PCI/PCI transfers
Jul 06 17:41:10 [debug] ->>> pci 0000:00:0f.0: Boot video device
Jul 06 17:41:10 [debug] ->>> vesafb: framebuffer at 0xf0000000, mapped to 0xd0880000, using 3072k, total 17984k
Jul 06 17:41:10 [debug] ->>> vesafb: mode is 1024x768x16, linelength=2048, pages=0
Jul 06 17:41:10 [debug] ->>> vesafb: scrolling: redraw
Jul 06 17:41:10 [debug] ->>> vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Jul 06 17:41:10 [debug] ->>> Console: switching to colour frame buffer device 128x48
Jul 06 17:41:10 [debug] ->>> fb0: VESA VGA frame buffer device
Jul 06 17:41:10 [debug] ->>> isapnp: Scanning for PnP cards...
Jul 06 17:41:10 [debug] ->>> isapnp: No Plug & Play device found
Jul 06 17:41:10 [debug] ->>> Floppy drive(s): fd0 is 1.44M
Jul 06 17:41:10 [debug] ->>> FDC 0 is a post-1991 82077
Jul 06 17:41:10 [debug] ->>> brd: module loaded
Jul 06 17:41:10 [debug] ->>> Uniform Multi-Platform E-IDE driver
Jul 06 17:41:10 [debug] ->>> ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Jul 06 17:41:10 [debug] ->>> PIIX4: IDE controller (0x8086:0x7111 rev 0x01) at PCI slot 0000:00:07.1
Jul 06 17:41:10 [debug] ->>> PIIX4: not 100% native mode: will probe irqs later
Jul 06 17:41:10 [debug] ->>> ide0: BM-DMA at 0x1050-0x1057, BIOS settings: hda:DMA, hdb:PIO
Jul 06 17:41:10 [debug] ->>> ide1: BM-DMA at 0x1058-0x105f, BIOS settings: hdc:DMA, hdd:PIO
Jul 06 17:41:10 [debug] ->>> Probing IDE interface ide0...
Jul 06 17:41:10 [debug] ->>> hda: VMware Virtual IDE Hard Drive, ATA DISK drive
Jul 06 17:41:10 [debug] ->>> hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
Jul 06 17:41:10 [debug] ->>> hda: UDMA/33 mode selected
Jul 06 17:41:10 [debug] ->>> Probing IDE interface ide1...
Jul 06 17:41:10 [debug] ->>> hdc: VMware Virtual IDE CDROM Drive, ATAPI CD/DVD-ROM drive
Jul 06 17:41:10 [debug] ->>> hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4
Jul 06 17:41:10 [debug] ->>> hdc: UDMA/33 mode selected
Jul 06 17:41:10 [debug] ->>> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Jul 06 17:41:10 [debug] ->>> ide1 at 0x170-0x177,0x376 on irq 15
Jul 06 17:41:10 [debug] ->>> hda: max request size: 128KiB
Jul 06 17:41:10 [debug] ->>> hda: 41943040 sectors (21474 MB) w/32KiB Cache, CHS=44384/15/63
Jul 06 17:41:10 [debug] ->>> hda: unknown partition table
Jul 06 17:41:10 [debug] ->>> hdc: ATAPI 32X DVD-ROM drive, 512kB Cache
Jul 06 17:41:10 [debug] ->>> Uniform CD-ROM driver Revision: 3.20
Jul 06 17:41:10 [debug] ->>> Loading iSCSI transport class v2.0-869.
Jul 06 17:41:10 [debug] ->>> Driver 'sd' needs updating - please use bus_type methods
Jul 06 17:41:10 [debug] ->>> Driver 'sr' needs updating - please use bus_type methods
Jul 06 17:41:10 [debug] ->>> PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUS] at 0x60,0x64 irq 1,12
Jul 06 17:41:10 [debug] ->>> serio: i8042 KBD port at 0x60,0x64 irq 1
Jul 06 17:41:10 [debug] ->>> serio: i8042 AUX port at 0x60,0x64 irq 12
Jul 06 17:41:10 [debug] ->>> mice: PS/2 mouse device common for all mice
Jul 06 17:41:10 [debug] ->>> EISA: Probing bus 0 at eisa.0
Jul 06 17:41:10 [debug] ->>> Cannot allocate resource for EISA slot 1
Jul 06 17:41:10 [debug] ->>> Cannot allocate resource for EISA slot 2
Jul 06 17:41:10 [debug] ->>> EISA: Detected 0 cards.
Jul 06 17:41:10 [debug] ->>> TCP cubic registered
Jul 06 17:41:10 [debug] ->>> NET: Registered protocol family 1
Jul 06 17:41:10 [debug] ->>> NET: Registered protocol family 15
Jul 06 17:41:10 [debug] ->>> Using IPI No-Shortcut mode
Jul 06 17:41:10 [debug] ->>> input: AT Translated Set 2 keyboard as /class/input/input0
Jul 06 17:41:10 [debug] ->>> RAMDISK: Compressed image found at block 0
Jul 06 17:41:10 [debug] ->>> VFS: Mounted root (ext2 filesystem).
Jul 06 17:41:10 [debug] ->>> Freeing unused kernel memory: 352k freed
Jul 06 17:41:10 [debug] ->>> Failed to execute /etc/init. Attempting defaults...
Jul 06 17:41:10 [debug] ->>> pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Jul 06 17:41:10 [debug] ->>> shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Jul 06 17:41:10 [debug] ->>> piix4_smbus 0000:00:07.3: Found 0000:00:07.3 device
Jul 06 17:41:10 [debug] ->>> piix4_smbus 0000:00:07.3: Host SMBus controller not enabled!
Jul 06 17:41:10 [debug] ->>> No dock devices found.
Jul 06 17:41:10 [debug] ->>> usbcore: registered new interface driver usbfs
Jul 06 17:41:10 [debug] ->>> usbcore: registered new interface driver hub
Jul 06 17:41:10 [debug] ->>> usbcore: registered new device driver usb
Jul 06 17:41:10 [debug] ->>> ACPI: ACPI0007:00 is registered as cooling_device0
Jul 06 17:41:10 [debug] ->>> ACPI: Processor [CPU0] (supports 8 throttling states)
Jul 06 17:41:10 [debug] ->>> ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
Jul 06 17:41:10 [debug] ->>> PCI: setting IRQ 11 as level-triggered
Jul 06 17:41:10 [debug] ->>> ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
Jul 06 17:41:10 [debug] ->>> libata version 3.00 loaded.
Jul 06 17:41:10 [debug] ->>> USB Universal Host Controller Interface driver v3.0
Jul 06 17:41:10 [debug] ->>> ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 9
Jul 06 17:41:10 [debug] ->>> PCI: setting IRQ 9 as level-triggered
Jul 06 17:41:10 [debug] ->>> ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 9 (level, low) -> IRQ 9
Jul 06 17:41:10 [debug] ->>> uhci_hcd 0000:00:07.2: UHCI Host Controller
Jul 06 17:41:10 [debug] ->>> uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
Jul 06 17:41:10 [debug] ->>> uhci_hcd 0000:00:07.2: irq 9, io base 0x00001060
Jul 06 17:41:10 [debug] ->>> usb usb1: configuration #1 chosen from 1 choice
Jul 06 17:41:10 [debug] ->>> hub 1-0:1.0: USB hub found
Jul 06 17:41:10 [debug] ->>> hub 1-0:1.0: 2 ports detected
Jul 06 17:41:10 [debug] ->>> scsi: ***** BusLogic SCSI Driver Version 2.1.16 of 18 July 2002 *****
Jul 06 17:41:10 [debug] ->>> scsi: Copyright 1995-1998 by Leonard N. Zubkoff <
lnz@dandelion.com>
Jul 06 17:41:10 [debug] ->>> ACPI: AC Adapter [ACAD] (on-line)
Jul 06 17:41:10 [debug] ->>> scsi0: Configuring BusLogic Model BT-958 PCI Wide Ultra SCSI Host Adapter
Jul 06 17:41:10 [debug] ->>> scsi0: Firmware Version: 5.07B, I/O Address: 0x1080, IRQ Channel: 11/Level
Jul 06 17:41:10 [debug] ->>> scsi0: PCI Bus: 0, Device: 16, Address: 0xE8801000, Host Adapter SCSI ID: 7
Jul 06 17:41:10 [debug] ->>> scsi0: Parity Checking: Enabled, Extended Translation: Enabled
Jul 06 17:41:10 [debug] ->>> scsi0: Synchronous Negotiation: Ultra, Wide Negotiation: Enabled
Jul 06 17:41:10 [debug] ->>> scsi0: Disconnect/Reconnect: Enabled, Tagged Queuing: Enabled
Jul 06 17:41:10 [debug] ->>> scsi0: Scatter/Gather Limit: 128 of 8192 segments, Mailboxes: 211
Jul 06 17:41:10 [debug] ->>> scsi0: Driver Queue Depth: 211, Host Adapter Queue Depth: 192
Jul 06 17:41:10 [debug] ->>> scsi0: Tagged Queue Depth: Automatic, Untagged Queue Depth: 3
Jul 06 17:41:10 [debug] ->>> scsi0: *** BusLogic BT-958 Initialized Successfully ***
Jul 06 17:41:10 [debug] ->>> input: Power Button (FF) as /class/input/input1
Jul 06 17:41:10 [debug] ->>> ACPI: Power Button (FF) [PWRF]
Jul 06 17:41:10 [debug] ->>> ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 5
Jul 06 17:41:10 [debug] ->>> PCI: setting IRQ 5 as level-triggered
Jul 06 17:41:10 [debug] ->>> ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNKA] -> GSI 5 (level, low) -> IRQ 5
Jul 06 17:41:10 [debug] ->>> ehci_hcd 0000:02:02.0: EHCI Host Controller
Jul 06 17:41:10 [debug] ->>> ehci_hcd 0000:02:02.0: new USB bus registered, assigned bus number 2
Jul 06 17:41:10 [debug] ->>> PCI: cache line size of 64 is not supported by device 0000:02:02.0
Jul 06 17:41:10 [debug] ->>> ehci_hcd 0000:02:02.0: irq 5, io mem 0xe8900000
Jul 06 17:41:10 [debug] ->>> ehci_hcd 0000:02:02.0: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Jul 06 17:41:10 [debug] ->>> pcnet32.c:v1.34 14.Aug.2007
tsbogend@alpha.franken.de
Jul 06 17:41:10 [debug] ->>> usb usb2: configuration #1 chosen from 1 choice
Jul 06 17:41:10 [debug] ->>> hub 2-0:1.0: USB hub found
Jul 06 17:41:10 [debug] ->>> hub 2-0:1.0: 6 ports detected
Jul 06 17:41:10 [debug] ->>> ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
Jul 06 17:41:10 [debug] ->>> pcnet32: PCnet/PCI II 79C970A at 0x2000, 00:0c:29:7b:cc:b1 assigned IRQ 10.
Jul 06 17:41:10 [debug] ->>> eth0: registered as PCnet/PCI II 79C970A
Jul 06 17:41:10 [debug] ->>> pcnet32: 1 cards_found.
Jul 06 17:41:10 [debug] ->>> Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
Jul 06 17:41:10 [debug] ->>> serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Jul 06 17:41:10 [debug] ->>> serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Jul 06 17:41:10 [debug] ->>> 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Jul 06 17:41:10 [debug] ->>> 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Jul 06 17:41:10 [debug] ->>> scsi0 : BusLogic BT-958
Jul 06 17:41:10 [debug] ->>> fuse init (API version 7.9)
Jul 06 17:41:10 [debug] ->>> NET: Registered protocol family 17
Jul 06 17:41:10 [debug] ->>> eth0: link up
Jul 06 17:41:10 [debug] ->>> eth0: link up
Jul 06 17:41:10 [debug] Exit code: 0
Jul 06 17:41:10 [debug] Executing: cat /etc/environment
Jul 06 17:41:10 [debug] ->>> LANG="de_DE.UTF8"
Jul 06 17:41:10 [debug] ->>> LANGUAGE="de"
Jul 06 17:41:10 [debug] ->>> LC_ALL="de_DE.UTF8"
Jul 06 17:41:10 [debug] Exit code: 0
Jul 06 17:41:10 [debug] Executing: env 2>&1
Jul 06 17:41:10 [debug] ->>> LANGUAGE=de
Jul 06 17:41:10 [debug] ->>> UPSTART_JOB=tty6
Jul 06 17:41:10 [debug] ->>> UPSTART_JOB_ID=17
Jul 06 17:41:10 [debug] ->>> TERM=linux
Jul 06 17:41:10 [debug] ->>> PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin
Jul 06 17:41:10 [debug] ->>> UPSTART_EVENT=runlevel
Jul 06 17:41:10 [debug] ->>> PWD=/
Jul 06 17:41:10 [debug] Exit code: 0
Jul 06 17:41:10 [debug] Executing: locale 2>&1
Jul 06 17:41:10 [debug] ->>> LANG=
Jul 06 17:41:10 [debug] ->>> LANGUAGE=de
Jul 06 17:41:10 [debug] ->>> LC_CTYPE="POSIX"
Jul 06 17:41:10 [debug] ->>> LC_NUMERIC="POSIX"
Jul 06 17:41:10 [debug] ->>> LC_TIME="POSIX"
Jul 06 17:41:10 [debug] ->>> LC_COLLATE="POSIX"
Jul 06 17:41:10 [debug] ->>> LC_MONETARY="POSIX"
Jul 06 17:41:10 [debug] ->>> LC_MESSAGES="POSIX"
Jul 06 17:41:10 [debug] ->>> LC_PAPER="POSIX"
Jul 06 17:41:10 [debug] ->>> LC_NAME="POSIX"
Jul 06 17:41:10 [debug] ->>> LC_ADDRESS="POSIX"
Jul 06 17:41:10 [debug] ->>> LC_TELEPHONE="POSIX"
Jul 06 17:41:10 [debug] ->>> LC_MEASUREMENT="POSIX"
Jul 06 17:41:10 [debug] ->>> LC_IDENTIFICATION="POSIX"
Jul 06 17:41:10 [debug] ->>> LC_ALL=
Jul 06 17:41:10 [debug] Exit code: 0
Jul 06 17:41:10 [debug] Reading /proc/cmdline
Jul 06 17:41:10 [info] Kernel commandline: {'lang': 'de', 'product': 'hwinvent', 'init': '/etc/init', 'boot_image': 'install', 'pckey': '********************************', 'service': '192.168.4.40', 'splash': '', 'vga': '791', 'reboot': 'b', 'noapic': '', 'initrd': 'miniroot.gz', 'quiet': '', 'video': 'vesa:ywrap,mtrr', 'ramdisk_size': '175880', 'hn': 'xp2'}
Jul 06 17:41:10 [debug] Command 'ifconfig' found: '/sbin/ifconfig'
Jul 06 17:41:10 [debug] Executing: /sbin/ifconfig
Jul 06 17:41:10 [debug] ->>> eth0 Link encap:Ethernet HWaddr 00:0c:29:7b:cc:b1
Jul 06 17:41:10 [debug] ->>> inet addr:192.168.2.12 Bcast:192.168.2.255 Mask:255.255.255.0
Jul 06 17:41:10 [debug] ->>> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
Jul 06 17:41:10 [debug] ->>> RX packets:3 errors:0 dropped:0 overruns:0 frame:0
Jul 06 17:41:10 [debug] ->>> TX packets:3 errors:0 dropped:0 overruns:0 carrier:0
Jul 06 17:41:10 [debug] ->>> collisions:0 txqueuelen:1000
Jul 06 17:41:10 [debug] ->>> RX bytes:1042 (1.0 KB) TX bytes:1522 (1.4 KB)
Jul 06 17:41:10 [debug] ->>> Interrupt:10 Base address:0x2000
Jul 06 17:41:10 [debug] ->>>
Jul 06 17:41:10 [debug] ->>> lo Link encap:Local Loopback
Jul 06 17:41:10 [debug] ->>> inet addr:127.0.0.1 Mask:255.0.0.0
Jul 06 17:41:10 [debug] ->>> UP LOOPBACK RUNNING MTU:16436 Metric:1
Jul 06 17:41:10 [debug] ->>> RX packets:2 errors:0 dropped:0 overruns:0 frame:0
Jul 06 17:41:10 [debug] ->>> TX packets:2 errors:0 dropped:0 overruns:0 carrier:0
Jul 06 17:41:10 [debug] ->>> collisions:0 txqueuelen:0
Jul 06 17:41:10 [debug] ->>> RX bytes:100 (100.0 B) TX bytes:100 (100.0 B)
Jul 06 17:41:10 [debug] ->>>
Jul 06 17:41:10 [debug] Exit code: 0
Jul 06 17:41:10 [info] Found ethernet device: 'eth0'
Jul 06 17:41:10 [debug] Command 'pump' found: '/sbin/pump'
Jul 06 17:41:10 [debug] Executing: /sbin/pump -s -i eth0
Jul 06 17:41:10 [debug] ->>> Device eth0
Jul 06 17:41:10 [debug] ->>> IP: 192.168.2.12
Jul 06 17:41:10 [debug] ->>> Netmask: 255.255.255.0
Jul 06 17:41:10 [debug] ->>> Broadcast: 192.168.2.255
Jul 06 17:41:10 [debug] ->>> Network: 192.168.2.0
Jul 06 17:41:10 [debug] ->>> Boot server 192.168.2.100
Jul 06 17:41:10 [debug] ->>> Next server 192.168.2.100
Jul 06 17:41:10 [debug] ->>> Gateway: 192.168.2.1
Jul 06 17:41:10 [debug] ->>> Gateways: 192.168.2.1
Jul 06 17:41:10 [debug] ->>> Boot file: linux/pxelinux.0
Jul 06 17:41:10 [debug] ->>> Hostname: xp2
Jul 06 17:41:10 [debug] ->>> Domain: testnetz.local
Jul 06 17:41:10 [debug] ->>> Nameservers: 192.168.2.1
Jul 06 17:41:10 [debug] ->>> Renewal time: Sun Jul 6 19:26:05 2008
Jul 06 17:41:10 [debug] ->>> Expiration time: Sun Jul 6 19:41:05 2008
Jul 06 17:41:10 [debug] Exit code: 0
Jul 06 17:41:13 [info] Using interface 'eth0' with ip '192.168.2.12'.
Jul 06 17:41:13 [info] DHCP result:
{
"domain" : "testnetz.local",
"network" : "192.168.2.0",
"nameservers" : "192.168.2.1",
"ip" : "192.168.2.12",
"hostname" : "xp2",
"bootfile" : "linux/pxelinux.0",
"broadcast" : "192.168.2.255",
"nextserver" : "192.168.2.100",
"netmask" : "255.255.255.0",
"gateways" : "192.168.2.1",
"device" : "eth0",
"expirationtime" : "Sun",
"bootserver" : "192.168.2.100",
"gateway" : "192.168.2.1",
"renewaltime" : "Sun"
}
Jul 06 17:41:13 [debug] Executing: /sbin/ifconfig eth0
Jul 06 17:41:13 [debug] ->>> eth0 Link encap:Ethernet HWaddr 00:0c:29:7b:cc:b1
Jul 06 17:41:13 [debug] ->>> inet addr:192.168.2.12 Bcast:192.168.2.255 Mask:255.255.255.0
Jul 06 17:41:13 [debug] ->>> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
Jul 06 17:41:13 [debug] ->>> RX packets:3 errors:0 dropped:0 overruns:0 frame:0
Jul 06 17:41:13 [debug] ->>> TX packets:3 errors:0 dropped:0 overruns:0 carrier:0
Jul 06 17:41:13 [debug] ->>> collisions:0 txqueuelen:1000
Jul 06 17:41:13 [debug] ->>> RX bytes:1042 (1.0 KB) TX bytes:1522 (1.4 KB)
Jul 06 17:41:13 [debug] ->>> Interrupt:10 Base address:0x2000
Jul 06 17:41:13 [debug] ->>>
Jul 06 17:41:13 [debug] Exit code: 0
Jul 06 17:41:13 [info] Ethernet hardware address: 00:0c:29:7b:cc:b1
Jul 06 17:41:13 [notice] Option service in kernel cmdline => using OPSICONFD mode
Jul 06 17:41:13 [info] Using FQDN 'xp2.testnetz.local'
Jul 06 17:41:13 [debug] Executing: ifconfig
Jul 06 17:41:13 [debug] ->>> eth0 Link encap:Ethernet HWaddr 00:0c:29:7b:cc:b1
Jul 06 17:41:13 [debug] ->>> inet addr:192.168.2.12 Bcast:192.168.2.255 Mask:255.255.255.0
Jul 06 17:41:13 [debug] ->>> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
Jul 06 17:41:13 [debug] ->>> RX packets:3 errors:0 dropped:0 overruns:0 frame:0
Jul 06 17:41:13 [debug] ->>> TX packets:3 errors:0 dropped:0 overruns:0 carrier:0
Jul 06 17:41:13 [debug] ->>> collisions:0 txqueuelen:1000
Jul 06 17:41:13 [debug] ->>> RX bytes:1042 (1.0 KB) TX bytes:1522 (1.4 KB)
Jul 06 17:41:13 [debug] ->>> Interrupt:10 Base address:0x2000
Jul 06 17:41:13 [debug] ->>>
Jul 06 17:41:13 [debug] ->>> lo Link encap:Local Loopback
Jul 06 17:41:13 [debug] ->>> inet addr:127.0.0.1 Mask:255.0.0.0
Jul 06 17:41:13 [debug] ->>> UP LOOPBACK RUNNING MTU:16436 Metric:1
Jul 06 17:41:13 [debug] ->>> RX packets:2 errors:0 dropped:0 overruns:0 frame:0
Jul 06 17:41:13 [debug] ->>> TX packets:2 errors:0 dropped:0 overruns:0 carrier:0
Jul 06 17:41:13 [debug] ->>> collisions:0 txqueuelen:0
Jul 06 17:41:13 [debug] ->>> RX bytes:100 (100.0 B) TX bytes:100 (100.0 B)
Jul 06 17:41:13 [debug] ->>>
Jul 06 17:41:13 [debug] Exit code: 0
Jul 06 17:41:13 [info] Creating JSONRPCBackend instance
Jul 06 17:41:13 [debug] Failed to get possible methods from backend manager
Jul 06 17:41:13 [info] Opening https connection to 192.168.4.40:4447
Jul 06 17:41:13 [debug] Options: {}
Jul 06 17:41:13 [debug] jsonrpc string: {"params":[],"id":1,"method":"getPossibleMethods_listOfHashes"}
Jul 06 17:41:13 [debug] requesting: '
https://192.168.4.40:4447/rpc', query '{"params":[],"id":1,"method":"getPossibleMethods_listOfHashes"}'
Jul 06 17:41:13 [debug] Using method POST
Jul 06 17:44:22 [critical] Traceback:
Jul 06 17:44:22 [critical] line 254 in '__request' in file '/var/lib/python-support/python2.5/OPSI/Backend/JSONRPC.py'
Jul 06 17:44:22 [critical] line 860 in 'endheaders' in file '/usr/lib/python2.5/httplib.py'
Jul 06 17:44:22 [critical] line 732 in '_send_output' in file '/usr/lib/python2.5/httplib.py'
Jul 06 17:44:22 [critical] line 699 in 'send' in file '/usr/lib/python2.5/httplib.py'
Jul 06 17:44:22 [critical] line 1134 in 'connect' in file '/usr/lib/python2.5/httplib.py'
Jul 06 17:44:22 [critical] line 1 in 'connect' in file '<string>'
Jul 06 17:44:22 [critical] ==>>> (110, 'Connection timed out')
Jul 06 17:44:22 [error] Connection to service '192.168.4.40' failed: Cannot connect to '
https://192.168.4.40:4447/rpc': Requesting '
https://192.168.4.40:4447/rpc', query '{"params":[],"id":1,"method":"getPossibleMethods_listOfHashes"}' failed: (110, 'Connection timed out')
Jul 06 17:46:24 [info] Creating admin backend
Jul 06 17:46:37 [info] Creating JSONRPCBackend instance
Jul 06 17:46:37 [debug] Failed to get possible methods from backend manager
Jul 06 17:46:37 [info] Opening https connection to 192.168.2.100:4447
Jul 06 17:46:37 [debug] Options: {}
Jul 06 17:46:37 [debug] jsonrpc string: {"params":[],"id":1,"method":"getPossibleMethods_listOfHashes"}
Jul 06 17:46:37 [debug] requesting: '
https://192.168.2.100:4447/rpc', query '{"params":[],"id":1,"method":"getPossibleMethods_listOfHashes"}'
Jul 06 17:46:37 [debug] Using method POST
Jul 06 17:46:37 [info] Successfully connected to '192.168.2.100:4447'
Jul 06 17:46:37 [debug] Options: {'params': ('__UNDEF__', '__UNDEF__', '__UNDEF__', '__UNDEF__', '__UNDEF__', '__UNDEF__', '__UNDEF__', '__UNDEF__', '__UNDEF__')}
Jul 06 17:46:37 [debug] jsonrpc string: {"params":[null,null,null,null,null,null,null,null,null],"id":1,"method":"getClientIds_list"}
Jul 06 17:46:37 [debug] requesting: '
https://192.168.2.100:4447/rpc', query '{"params":[null,null,null,null,null,null,null,null,null],"id":1,"method":"getClientIds_list"}'
Jul 06 17:46:37 [debug] Using method POST
Jul 06 17:46:37 [debug] Options: {'params': 'xp2.testnetz.local'}
Jul 06 17:46:37 [debug] jsonrpc string: {"params":["xp2.testnetz.local"],"id":1,"method":"getOpsiHostKey"}
Jul 06 17:46:37 [debug] requesting: '
https://192.168.2.100:4447/rpc', query '{"params":["xp2.testnetz.local"],"id":1,"method":"getOpsiHostKey"}'
Jul 06 17:46:37 [debug] Using method POST
Jul 06 17:46:37 [debug] Failed to get possible methods from backend manager
Jul 06 17:46:37 [info] Opening https connection to 192.168.2.100:4447
Jul 06 17:46:37 [debug] Options: {}
Jul 06 17:46:37 [debug] jsonrpc string: {"params":[],"id":1,"method":"getPossibleMethods_listOfHashes"}
Jul 06 17:46:37 [debug] requesting: '
https://192.168.2.100:4447/rpc', query '{"params":[],"id":1,"method":"getPossibleMethods_listOfHashes"}'
Jul 06 17:46:37 [debug] Using method POST
Jul 06 17:46:38 [info] Successfully connected to '192.168.2.100:4447'
Jul 06 17:46:38 [info] Product-id is 'hwinvent'
Jul 06 17:46:38 [info] Fetching product...
Jul 06 17:46:38 [debug] Options: {'params': ('hwinvent', '__UNDEF__')}
Jul 06 17:46:38 [debug] jsonrpc string: {"params":["hwinvent",null],"id":1,"method":"getProduct_hash"}
Jul 06 17:46:38 [debug] requesting: '
https://192.168.2.100:4447/rpc', query '{"params":["hwinvent",null],"id":1,"method":"getProduct_hash"}'
Jul 06 17:46:38 [debug] Using method POST
Jul 06 17:46:38 [info] Product-hash:
mehr Zeichen ging leider nicht
Danke übrigens für Ihre schnelle Antwort und das auf einem Sonntag, wow
