Hallo,
beim Versuch eine ThinkPad X200 von Lenovo zu integrieren wurde vom Bootimage eth0 nicht erkannt.
Kann man selbst den Treiber hinzufügen? Wenn ja, gibt es ein HowTo?
Vielen Dank!
Es handelt sich um folgende Hardware ( Inhalt der ReadMe.txt von Lenovo ):
----------------------------------------------------------------------
Software Name Intel PRO/1000 LAN Adapter Software
Support models ThinkPad R400
ThinkPad T400
ThinkPad T500
ThinkPad W500
ThinkPad W700
ThinkPad X200, X200s, X200 Tablet
ThinkPad X301
Operating Systems Microsoft Windows Vista 32-bit, 64-bit
Refer to marketing materials to find out what
computer models support which Operating Systems.
Version 9.52.9.0 (Build 170330)
Issue date September 12, 2008
Support devices Intel 82567LM Gigabit Network Connection
Intel 82567LF Gigabit Network Connection
----------------------------------------------------------------------
WHAT THIS PACKAGE DOES
This package installs the software (Ethernet driver) to enable the
following devices.
- Intel 82567LM Gigabit Network Connection
- Intel 82567LF Gigabit Network Connection
Refer to marketing materials to find out what computer models
support which devices.
This package also installs Intel PROSet for Windows Device Manager
which is an extension to the Windows Device Manager.
After the Intel PROSet software is installed, additional tabs are
automatically added to Device Manager.
If this package has been installed, updating (overwrite-installing)
this package will fix problems, add new functions, or expand
functions as noted below.
This program is language independent and can be used with any
language system.
----------------------------------------------------------------------
CHANGES IN THIS RELEASE
Version 9.52.9.0 (Build 170330)
[Important updates]
Nothing.
[New functions or enhancements]
- Support for ThinkPad W700, X301 (added).
- Support for ThinkPad X200s,X200 Tablet (added).
[Problem fixes]
- 9 Kbyte Jumbo Frame performance problem.
----------------------------------------------------------------------
DETERMINING WHICH VERSION IS INSTALLED
File Name Version (Build) Operating System
------------ ------------------ --------------------
e1y6032.sys 9.52.9.0 (170330) Windows Vista 32-bit
e1y60x64.sys 9.52.9.0 (170330) Windows Vista 64-bit
To check the version of the device driver that is installed on your
system, follow the following instructions.
1. Click Start, then click Control Panel.
2. Click System and Maintenance, then click System.
3. Click Device Manager.
4. Click the "+" sign in front of the Network adapters type to open
the all devices in that type.
5. Double-click one of the following devices;
- Intel 82567LM Gigabit Network Connection
- Intel 82567LF Gigabit Network Connection
6. Click the Driver tab and the driver version will be displayed.
----------------------------------------------------------------------
NOTES
For PROSet users:
If a prior versions of Intel PROSet was installed, you should be
aware of the following changes with Intel PROSet for Windows Device
Manager;
- There is no system tray icon.
- The configuration utility is not accessible from the Control Panel
or the Start menu.
- All Intel PROSet features are now accessed from Device Manager.
To access features, simply open the Device Manager and double-
click the Intel adapter you would like to configure.
----------------------------------------------------------------------
INSTALLATION INSTRUCTIONS
Note:
If your computer runs satisfactorily now, it may not be necessary to
update the software. To determine if you should update the software,
refer to the Version Information section.
---------------
Ethernet Driver
---------------
Manual Install
1. Start Windows Vista and logon with administrative privileges.
2. Extract this package onto your hard drive.
2. Click Start, select All Programs, select Accessories, then click
Run...
3. Click Browse, and specify DxSetup.exe with the full path name
where you extracted the package and click OK.
Example:
[Windows Vista 32-bit]
C:\DRIVERS\Vista\ETHERNET\APPS\SETUP\SETUPBD\Vista32\SetupBD
[Windows Vista 64-bit]
C:\DRIVERS\Vista\ETHERNET\APPS\SETUP\SETUPBD\Vistax64\SetupBD
4. Click Open, and click OK.
5. Click OK, then installation will start.
6. Click Close button.
Unattended Install
This is for system administrators' use only.
DOS drivers for unattended installation:
For customers who need unattended installation, the DOS drivers are
included in another package (7vrdxxww package). The DOS drivers can
be used only for this purpose.
The information about unattended installation instructions are
included in the following folders in this package.
[Windows Vista 32-bit]
C:\DRIVERS\Vista\ETHERNET\APPS\SETUP\PUSH\Vista32
[Windows Vista 64-bit]
C:\DRIVERS\Vista\ETHERNET\APPS\SETUP\PUSH\Vistax64
---------------------------------------
Intel PROSet for Windows Device Manager
---------------------------------------
Manual Install
1. Make sure to be logged on with administrative privileges.
2. Click Start, select All Programs, select Accessories, then click
Run...
3. Click Browse, and specify DxSetup.exe with the full path name
where you extracted the package and click OK.
Example:
[Windows Vista 32-bit]
C:\DRIVERS\WIN\ETHERNET\APPS\PROSETDX\Vista32\DxSetup.exe
[Windows Vista 64-bit]
C:\DRIVERS\WIN\ETHERNET\APPS\PROSETDX\Vistax64\DxSetup.exe
4. Click Next.
5. Select I accept the terms in the license agreement, then click
Next.
6. Click Next.
7. Click Install.
8. Click Finish.
----------------------------------------------------------------------
VERSION INFORMATION
The following versions have been released to date.
Versions Build No. The contents
--------- --------- ---------------
9.52.9.0 170330 2nd release
9.50.14.0 167516 Initial release
To check the version of software, refer to the Determining which
version is installed section.
Summary of Changes
Where: < > Version number
( ) Build number
[Important] Important update
(New) New function or enhancement
(Fix) Correction to existing function
<9.52.9.0> (170330)
- (Fix) 9K Jumbo Frame performance
- (New) Support for ThinkPad W700,X301 (added).
- (New) Support for ThinkPad X200s,X200 Tablet (added).
<9.50.14.0> (167516)
- (New) Initial release. Support for ThinkPad R400,T400,T500,W500,X200.
----------------------------------------------------------------------
TRADEMARKS
* Lenovo and ThinkPad are registered trademarks of Lenovo.
* Intel is a registered trademark of Intel Corporation.
* Microsoft and Windows are registered trademarks of Microsoft
Corporation.
* Windows Vista is a trademark of Microsoft Corporation.
Other company, product, and service names may be registered trademarks,
trademarks or service marks of others.
Ethernet wird vom Bootimage nicht erkannt
- j.schneider
- uib-Team
- Beiträge: 2045
- Registriert: 29 Mai 2008, 15:14
Re: Ethernet wird vom Bootimage nicht erkannt
Hallo,
schon einmal das neueste Bootimage ausprobiert?
http://download.uib.de/opsi3.3/testing/ ... -1_all.deb
Wenn das Problem bestehen bleibt, bitte die Bootimage-Logdatei (auf dem Client unter /tmp/log) posten.
Gruß
Jan Schneider
schon einmal das neueste Bootimage ausprobiert?
http://download.uib.de/opsi3.3/testing/ ... -1_all.deb
Wenn das Problem bestehen bleibt, bitte die Bootimage-Logdatei (auf dem Client unter /tmp/log) posten.
Gruß
Jan Schneider
Vielen Dank für die Nutzung von opsi. Im Forum ist unser Support begrenzt.
Für den professionellen Einsatz und individuelle Beratung empfehlen wir einen Support-Vertrag und eine Schulung.
Gerne informieren wir Sie zu unserem Angebot.
uib GmbH
Telefon: +49 6131 27561 0
E-Mail: sales@uib.de
Re: Ethernet wird vom Bootimage nicht erkannt
Vielen Dank, hätte ich auch selber drauf kommen können....