forum.opsi.org

Bei der Installation eines (neuen) Clients via pxe boot bekomme ich die Fehlermeldung IndexError(' list out of range')

IPv4
UEFI boot
Start opsi bootimage (x64) - Standard
weiter mit enter

installation is starting - please wait
opsi linuxbootimage (blauer hintergrund)
Muss nur der client hostname eingetragen werden - weiter mit ok
Host key not available - admin account ausgewählt
Server: https://opsisrv:4447/rpc
Username:adminuser
Password:xxxxx
weiter mit ok

Please select netboot-product to install
Win11-x64
weiter mit ok
Fehlermeldung IndexError(' list out of range') bootimage log zeigt:
Opsi Server:
opsi-linux-bootimage 20240110-1
opsi-server-full 4.3.1.2-1
opsi-tftpd-hpa 5.2.8-78
opsi-utils 4.3.2.10-1
opsi-webgui 4.3.28-1

Hat jemand eine Idee?
Beste Grüße

Norbert

Was ist das denn für eine Netboot-Produktversion? In dem Zuge vielleicht gleich, was hast du sonst noch für opsi-Paketversionen?
Stand 26.03.2024:
opsi-script sollte sein 4.12.13.0-5
opsi-client-agent sollte sein 4.3.1.0-1
win11-x64 sollte sein 4.2.0.6-5

Zum Auslesen: Zum Updaten dann:

Product ID Version
======================================= =================
activate-win 1.0-11
alma8 4.2.0.4-3
alma9 4.2.0.4-3
config-win10 4.2.0-3
debian 4.2.0.6-4
debian10 4.2.0.2-6
debian11 4.2.0.2-6
debian12 4.2.0.2-6
hwaudit 4.2.0.3-1
hwinvent 4.1.0.1-3
jedit 5.5.0-6
l-debuntu-upgrade 4.2.0.4-1
l-desktop 4.2.0.4-1
l-opsi-client-kiosk 4.3.0.1-8
l-opsi-server 4.3.0.5-1
l-opsi-server-migrate 4.3.0-1
l-opsi-server-register-depot 4.3.0.1-1
l-system-update 4.1.0.0-6
memtest86 6.20-2
mint20-1 4.2.0.4-5
mint20-2 4.2.0.4-5
mint20-3 4.2.0.4-5
mint21 4.2.0.4-5
mint21-1 4.2.0.4-5
mint21-2 4.2.0.4-5
networklocation 4.2.0.0-1
opensusel15-3 4.2.0.2-5
opensusel15-4 4.2.0.3-3
opensusel15-5 4.2.0.3-3
opsi-auto-update 4.2.0.6-2
opsi-cli 4.3.1.1-1
opsi-client-agent 4.3.1.0-1
opsi-client-kiosk 4.3.0.1-13
opsi-clonezilla 4.2.1.0-1
opsi-configed 4.3.1.10-1
opsi-linux-client-agent 4.3.1.0-1
opsi-rename-client 1.0.0-2
opsi-script 4.12.13.0-5
opsi-script-beautifier 4.2.0.4-2
opsi-script-test 4.12.12.0-3
opsi-setup-detector 4.3.1.4-1
opsi-template-with-userlogin 4.2.0.1-1
opsi-uefi-netboot 4.3.0.2-1
opsi-wan-config-off 4.3.0.0-1
opsi-wan-config-on 4.3.0.0-1
opsi-wim-capture 4.3.0.2-1
opsi-wim-delete 4.3.0.1-1
opsi-wim-info 4.3.0.1-1
opsi-win-driver-update 4.2.0.0-1
opsi-winpe 4.2.0-3
opsi-winst 4.12.13.0-5
opsipackagebuilder_wlm 8.5.0-1
oraclelinux8 4.2.0.4-3
oraclelinux9 4.2.0.4-3
pcvisit-v2311-x86-de 1.0.0-1
redhat8 4.2.0.4-3
redhat9 4.2.0.4-3
rocky8 4.2.0.4-3
rocky9 4.2.0.4-3
shutdownwanted 1.0-8
sles12sp3 4.2.0.3-2
sles12sp4 4.2.0.3-2
sles12sp5 4.2.0.3-3
sles15-1 4.2.0.3-3
sles15-2 4.2.0.3-3
sles15-3 4.2.0.3-3
sles15-4 4.2.0.3-3
sles15-5 4.2.0.3-3
swaudit 4.2.0.1-2
ubuntu 4.2.0.7-4
ubuntu18-04 4.2.0.1-12
ubuntu20-04 4.2.0.2-4
ubuntu22-04 4.2.0.2-5
ucs44 4.2.0.1-8
ucs50 4.2.0.1-10
win10 4.2.0.6-5
win10-captured 4.2.0.6-5
win10-repair-apps 1.0-5
win10-sysprep-app-update-blocker 4.2.0.0-2
win10-x64 4.2.0.6-5
win10-x64-captured 4.2.0.6-5
win11-x64 4.2.0.6-5
win11-x64-captured 4.2.0.6-5
win2016 4.2.0.6-5
win2019 4.2.0.6-5
win2022 4.2.0.6-5
windomain 2.2-5
windows10-enablement 22h2-1
windows10-upgrade 22h2-2
windows11-upgrade 22h2-2
wipedisk 2.3-7

Hi

ein vollständiges Log auf Loglevel 7 wäre gut um den Fehler nachzuvollziehen.

Ich habe eben mal intern genau so gestartet wie du es beschrieben gemacht und wie windows 11 Installation startet.

Gruß
Mathias

Das Log ist zu lang.
Ihr Beitrag besteht aus 205784 Zeichen.
Es sind maximal 60000 Zeichen erlaubt.

Sorry, you have been blocked
You are unable to access pastebin.com

(0) Apr 11 13:43:19 [opsiinit] opsi init script started
(1) Apr 11 13:43:19 [opsiinit] opsi linux bootimage version: 20240110 (4.3)
(2) Apr 11 13:43:19 [opsiinit] getBootParam(easypass): cmdline: *** confidential *** BOOT_IMAGE=(pxe)/opsi/opsi-linux-bootimage/install-x64 initrd=miniroot-x64 video=vesa:ywrap,mtrr quiet vga=791 --no-log console=ttyS0 service=https://opsisrv:4447/rpc
(3) Apr 11 13:43:19 [opsiinit] boot param easypass found
(4) Apr 11 13:43:19 [opsiinit] getBootParam(pwh): cmdline: *** confidential *** BOOT_IMAGE=(pxe)/opsi/opsi-linux-bootimage/install-x64 initrd=miniroot-x64 video=vesa:ywrap,mtrr quiet vga=791 --no-log console=ttyS0 service=https://opsisrv:4447/rpc
(5) Apr 11 13:43:19 [opsiinit] boot param pwh=
(6) Apr 11 13:43:19 [opsiinit] getBootParam(nodhcp): cmdline: *** confidential *** BOOT_IMAGE=(pxe)/opsi/opsi-linux-bootimage/install-x64 initrd=miniroot-x64 video=vesa:ywrap,mtrr quiet vga=791 --no-log console=ttyS0 service=https://opsisrv:4447/rpc
(7) Apr 11 13:43:19 [opsiinit] boot param nodhcp=0
(8) Apr 11 13:43:19 [opsiinit] getBootParam(hn): cmdline: *** confidential *** BOOT_IMAGE=(pxe)/opsi/opsi-linux-bootimage/install-x64 initrd=miniroot-x64 video=vesa:ywrap,mtrr quiet vga=791 --no-log console=ttyS0 service=https://opsisrv:4447/rpc
(9) Apr 11 13:43:19 [opsiinit] boot param hn=
(10) Apr 11 13:43:19 [opsiinit] getBootParam(dhclienttimeout): cmdline: *** confidential *** BOOT_IMAGE=(pxe)/opsi/opsi-linux-bootimage/install-x64 initrd=miniroot-x64 video=vesa:ywrap,mtrr quiet vga=791 --no-log console=ttyS0 service=https://opsisrv:4447/rpc
(11) Apr 11 13:43:19 [opsiinit] getBootParam(lang): cmdline: *** confidential *** BOOT_IMAGE=(pxe)/opsi/opsi-linux-bootimage/install-x64 initrd=miniroot-x64 video=vesa:ywrap,mtrr quiet vga=791 --no-log console=ttyS0 service=https://opsisrv:4447/rpc
(12) Apr 11 13:43:19 [opsiinit] boot param lang=
(13) Apr 11 13:43:19 [opsiinit] unlinking resolv.conf from stub systemd resolver
(14) Apr 11 13:43:19 [opsiinit] loading keymap us
(15) Apr 11 13:43:19 [opsiinit] setting language environment (LANG=en_US.UTF8, LANGUAGE=en, LC_ALL=en_US.UTF8)
(16) Apr 11 13:43:19 [opsiinit] getNetworkDevices(): link forced
(17) Apr 11 13:43:19 [opsiinit] getNetworkDevices(): device(s) found: enp6s18, device(s) with link:
(18) Apr 11 13:43:19 [opsiinit] getNetworkDevices(): no devices with link found and link forced, returning error
(19) Apr 11 13:43:19 [opsiinit] no devices found, sleeping 3 seconds
(20) Apr 11 13:43:22 [opsiinit] getNetworkDevices(): link forced
(21) Apr 11 13:43:22 [opsiinit] getNetworkDevices(): device(s) found: enp6s18, device(s) with link: enp6s18
(22) Apr 11 13:43:22 [opsiinit] getNetworkDevices(): device(s) with link found, returning enp6s18
(23) Apr 11 13:43:22 [opsiinit] device(s) found: enp6s18
(24) Apr 11 13:43:22 [opsiinit] getBootParam(macaddress): cmdline: *** confidential *** BOOT_IMAGE=(pxe)/opsi/opsi-linux-bootimage/install-x64 initrd=miniroot-x64 video=vesa:ywrap,mtrr quiet vga=791 --no-log console=ttyS0 service=https://opsisrv:4447/rpc
(25) Apr 11 13:43:22 [opsiinit] getNetworkDevices(): device(s) found: enp6s18, device(s) with link: enp6s18
(26) Apr 11 13:43:22 [opsiinit] getNetworkDevices(): device(s) with link found, returning enp6s18
(27) Apr 11 13:43:22 [opsiinit] using dhcp, adding entry for device enp6s18 to /etc/netplan/01-enp6s18.yaml
(28) Apr 11 13:43:23 [opsiinit] opsi init script ended
(29) Apr 11 13:43:23 [opsiinit] restarting plymouth
(30) Apr 11 13:43:23 [opsiinit] showing splash
(31) [7] [2024-04-11 13:43:34.237] [ ] Reading /proc/cmdline (__init__.py:112)
(32) [5] [2024-04-11 13:43:34.237] [ ] Master version 4.3.0.2 [python-opsi-common=4.3.0.76] (master.py:861)
(33) [6] [2024-04-11 13:43:34.237] [ ] Kernel commandline: {'rootfstype': 'ramfs', 'boot_image': '(pxe)/opsi/opsi-linux-bootimage/install-x64', 'initrd': 'miniroot-x64', 'video': 'vesa:ywrap,mtrr', 'quiet': '', 'vga': '791', '--no-log': '', 'console': 'ttyS0', 'service': 'https://opsisrv:4447/rpc'} (master.py:862)
(34) [7] [2024-04-11 13:43:34.237] [ ] Removing LD_LIBRARY_PATH from env for subprocess (Posix.py:879)
(35) [6] [2024-04-11 13:43:34.237] [ ] Executing: echo 0 > /proc/sys/kernel/printk (Posix.py:969)
(36) [6] [2024-04-11 13:43:34.238] [ ] Using encoding 'utf-8' (Posix.py:996)
(37) [7] [2024-04-11 13:43:34.247] [ ] Exit code: 0 (Posix.py:1049)
(38) [7] [2024-04-11 13:43:34.247] [ ] Removing LD_LIBRARY_PATH from env for subprocess (Posix.py:879)
(39) [6] [2024-04-11 13:43:34.247] [ ] Executing: setterm -msg off -blank 0 -powersave off < /dev/tty6 > /dev/tty6 (Posix.py:969)
(40) [6] [2024-04-11 13:43:34.248] [ ] Using encoding 'utf-8' (Posix.py:996)
(41) [7] [2024-04-11 13:43:34.255] [ ] Exit code: 0 (Posix.py:1049)
(42) [7] [2024-04-11 13:43:34.257] [ ] Removing LD_LIBRARY_PATH from env for subprocess (Posix.py:879)
(43) [6] [2024-04-11 13:43:34.257] [ ] Executing: dmesg (Posix.py:969)
(44) [6] [2024-04-11 13:43:34.257] [ ] Using encoding 'utf-8' (Posix.py:996)
(45) [7] [2024-04-11 13:43:34.267] [ ] >>> [ 0.712227] pcieport 0000:00:1c.3: saving config space at offset 0x0 (reading 0xc1b36) (Posix.py:1042)
(46) [7] [2024-04-11 13:43:34.267] [ ] >>> [ 0.712234] pcieport 0000:00:1c.3: saving config space at offset 0x4 (reading 0x100407) (Posix.py:1042)
(47) [7] [2024-04-11 13:43:34.267] [ ] >>> [ 0.712242] pcieport 0000:00:1c.3: saving config space at offset 0x8 (reading 0x6040000) (Posix.py:1042)
(48) [7] [2024-04-11 13:43:34.267] [ ] >>> [ 0.712249] pcieport 0000:00:1c.3: saving config space at offset 0xc (reading 0x810000) (Posix.py:1042)
(49) [7] [2024-04-11 13:43:34.267] [ ] >>> [ 0.712256] pcieport 0000:00:1c.3: saving config space at offset 0x10 (reading 0x82246000) (Posix.py:1042)
(50) [7] [2024-04-11 13:43:34.267] [ ] >>> [ 0.712263] pcieport 0000:00:1c.3: saving config space at offset 0x14 (reading 0x0) (Posix.py:1042)
(51) [7] [2024-04-11 13:43:34.267] [ ] >>> [ 0.712270] pcieport 0000:00:1c.3: saving config space at offset 0x18 (reading 0x40400) (Posix.py:1042)
(52) [7] [2024-04-11 13:43:34.267] [ ] >>> [ 0.712277] pcieport 0000:00:1c.3: saving config space at offset 0x1c (reading 0x4040) (Posix.py:1042)
(53) [7] [2024-04-11 13:43:34.267] [ ] >>> [ 0.712284] pcieport 0000:00:1c.3: saving config space at offset 0x20 (reading 0x81b081a0) (Posix.py:1042)
(54) [7] [2024-04-11 13:43:34.268] [ ] >>> [ 0.712292] pcieport 0000:00:1c.3: saving config space at offset 0x24 (reading 0x810071) (Posix.py:1042)
(55) [7] [2024-04-11 13:43:34.268] [ ] >>> [ 0.712299] pcieport 0000:00:1c.3: saving config space at offset 0x28 (reading 0x8) (Posix.py:1042)
(56) [7] [2024-04-11 13:43:34.268] [ ] >>> [ 0.712306] pcieport 0000:00:1c.3: saving config space at offset 0x2c (reading 0x8) (Posix.py:1042)
(57) [7] [2024-04-11 13:43:34.268] [ ] >>> [ 0.712313] pcieport 0000:00:1c.3: saving config space at offset 0x30 (reading 0x0) (Posix.py:1042)
(58) [7] [2024-04-11 13:43:34.268] [ ] >>> [ 0.712319] pcieport 0000:00:1c.3: saving config space at offset 0x34 (reading 0x54) (Posix.py:1042)
(59) [7] [2024-04-11 13:43:34.268] [ ] >>> [ 0.712327] pcieport 0000:00:1c.3: saving config space at offset 0x38 (reading 0x0) (Posix.py:1042)
(60) [7] [2024-04-11 13:43:34.268] [ ] >>> [ 0.712333] pcieport 0000:00:1c.3: saving config space at offset 0x3c (reading 0x2010a) (Posix.py:1042)
(61) [7] [2024-04-11 13:43:34.268] [ ] >>> [ 0.712461] pcieport 0000:00:1c.3: vgaarb: pci_notify (Posix.py:1042)
(62) [7] [2024-04-11 13:43:34.268] [ ] >>> [ 0.712467] pcieport 0000:00:1e.0: vgaarb: pci_notify (Posix.py:1042)
(63) [7] [2024-04-11 13:43:34.268] [ ] >>> [ 0.712469] pcieport 0000:00:1e.0: runtime IRQ mapping not provided by arch (Posix.py:1042)
(64) [7] [2024-04-11 13:43:34.268] [ ] >>> [ 0.712471] pcieport 0000:00:1e.0: vgaarb: pci_notify (Posix.py:1042)
(65) [7] [2024-04-11 13:43:34.268] [ ] >>> [ 0.712474] pcieport 0000:05:01.0: vgaarb: pci_notify (Posix.py:1042)
(66) [7] [2024-04-11 13:43:34.268] [ ] >>> [ 0.712476] pcieport 0000:05:01.0: runtime IRQ mapping not provided by arch (Posix.py:1042)
(67) [7] [2024-04-11 13:43:34.268] [ ] >>> [ 0.712478] pcieport 0000:05:01.0: vgaarb: pci_notify (Posix.py:1042)
(68) [7] [2024-04-11 13:43:34.268] [ ] >>> [ 0.712479] pcieport 0000:05:02.0: vgaarb: pci_notify (Posix.py:1042)
(69) [7] [2024-04-11 13:43:34.268] [ ] >>> [ 0.712481] pcieport 0000:05:02.0: runtime IRQ mapping not provided by arch (Posix.py:1042)
(70) [7] [2024-04-11 13:43:34.268] [ ] >>> [ 0.712483] pcieport 0000:05:02.0: vgaarb: pci_notify (Posix.py:1042)
(71) [7] [2024-04-11 13:43:34.268] [ ] >>> [ 0.712485] pcieport 0000:05:03.0: vgaarb: pci_notify (Posix.py:1042)
(72) [7] [2024-04-11 13:43:34.268] [ ] >>> [ 0.712487] pcieport 0000:05:03.0: runtime IRQ mapping not provided by arch (Posix.py:1042)
(73) [7] [2024-04-11 13:43:34.268] [ ] >>> [ 0.712488] pcieport 0000:05:03.0: vgaarb: pci_notify (Posix.py:1042)
(74) [7] [2024-04-11 13:43:34.268] [ ] >>> [ 0.712490] pcieport 0000:05:04.0: vgaarb: pci_notify (Posix.py:1042)
(75) [7] [2024-04-11 13:43:34.268] [ ] >>> [ 0.712492] pcieport 0000:05:04.0: runtime IRQ mapping not provided by arch (Posix.py:1042)
(76) [7] [2024-04-11 13:43:34.268] [ ] >>> [ 0.712493] pcieport 0000:05:04.0: vgaarb: pci_notify (Posix.py:1042)
(77) [7] [2024-04-11 13:43:34.268] [ ] >>> [ 0.712525] shpchp 0000:05:01.0: vgaarb: pci_notify (Posix.py:1042)
(78) [7] [2024-04-11 13:43:34.268] [ ] >>> [ 0.712527] shpchp 0000:05:01.0: runtime IRQ mapping not provided by arch (Posix.py:1042)
(79) [7] [2024-04-11 13:43:34.268] [ ] >>> [ 0.713090] shpchp 0000:05:01.0: HPC vendor_id 1b36 device_id 1 ss_vid 0 ss_did 0 (Posix.py:1042)
(80) [7] [2024-04-11 13:43:34.268] [ ] >>> [ 0.713318] ACPI: \_SB_.GSIF: Enabled at IRQ 21 (Posix.py:1042)
(81) [7] [2024-04-11 13:43:34.268] [ ] >>> [ 0.714268] shpchp 0000:05:01.0: pci_hp_register failed with error -16 (Posix.py:1042)
(82) [7] [2024-04-11 13:43:34.268] [ ] >>> [ 0.714271] shpchp 0000:05:01.0: Slot initialization failed (Posix.py:1042)
(83) [7] [2024-04-11 13:43:34.268] [ ] >>> [ 0.714797] shpchp 0000:05:01.0: vgaarb: pci_notify (Posix.py:1042)
(84) [7] [2024-04-11 13:43:34.268] [ ] >>> [ 0.714802] shpchp 0000:05:02.0: vgaarb: pci_notify (Posix.py:1042)
(85) [7] [2024-04-11 13:43:34.268] [ ] >>> [ 0.714804] shpchp 0000:05:02.0: runtime IRQ mapping not provided by arch (Posix.py:1042)
(86) [7] [2024-04-11 13:43:34.268] [ ] >>> [ 0.715359] shpchp 0000:05:02.0: HPC vendor_id 1b36 device_id 1 ss_vid 0 ss_did 0 (Posix.py:1042)
(87) [7] [2024-04-11 13:43:34.268] [ ] >>> [ 0.715554] ACPI: \_SB_.GSIG: Enabled at IRQ 22 (Posix.py:1042)
(88) [7] [2024-04-11 13:43:34.269] [ ] >>> [ 0.716803] shpchp 0000:05:02.0: pci_hp_register failed with error -16 (Posix.py:1042)
(89) [7] [2024-04-11 13:43:34.269] [ ] >>> [ 0.716806] shpchp 0000:05:02.0: Slot initialization failed (Posix.py:1042)
(90) [7] [2024-04-11 13:43:34.269] [ ] >>> [ 0.717326] shpchp 0000:05:02.0: vgaarb: pci_notify (Posix.py:1042)
(91) [7] [2024-04-11 13:43:34.269] [ ] >>> [ 0.717333] shpchp 0000:05:03.0: vgaarb: pci_notify (Posix.py:1042)
(92) [7] [2024-04-11 13:43:34.269] [ ] >>> [ 0.717335] shpchp 0000:05:03.0: runtime IRQ mapping not provided by arch (Posix.py:1042)
(93) [7] [2024-04-11 13:43:34.269] [ ] >>> [ 0.717891] shpchp 0000:05:03.0: HPC vendor_id 1b36 device_id 1 ss_vid 0 ss_did 0 (Posix.py:1042)
(94) [7] [2024-04-11 13:43:34.269] [ ] >>> [ 0.718092] ACPI: \_SB_.GSIH: Enabled at IRQ 23 (Posix.py:1042)
(95) [7] [2024-04-11 13:43:34.269] [ ] >>> [ 0.719045] shpchp 0000:05:03.0: pci_hp_register failed with error -16 (Posix.py:1042)
(96) [7] [2024-04-11 13:43:34.269] [ ] >>> [ 0.719047] shpchp 0000:05:03.0: Slot initialization failed (Posix.py:1042)
(97) [7] [2024-04-11 13:43:34.269] [ ] >>> [ 0.719553] shpchp 0000:05:03.0: vgaarb: pci_notify (Posix.py:1042)
(98) [7] [2024-04-11 13:43:34.269] [ ] >>> [ 0.719559] shpchp 0000:05:04.0: vgaarb: pci_notify (Posix.py:1042)
(99) [7] [2024-04-11 13:43:34.269] [ ] >>> [ 0.719561] shpchp 0000:05:04.0: runtime IRQ mapping not provided by arch (Posix.py:1042)
(100) [7] [2024-04-11 13:43:34.269] [ ] >>> [ 0.720141] shpchp 0000:05:04.0: HPC vendor_id 1b36 device_id 1 ss_vid 0 ss_did 0 (Posix.py:1042)
(101) [7] [2024-04-11 13:43:34.269] [ ] >>> [ 0.720341] ACPI: \_SB_.GSIE: Enabled at IRQ 20 (Posix.py:1042)
(102) [7] [2024-04-11 13:43:34.269] [ ] >>> [ 0.721293] shpchp 0000:05:04.0: pci_hp_register failed with error -16 (Posix.py:1042)
(103) [7] [2024-04-11 13:43:34.269] [ ] >>> [ 0.721295] shpchp 0000:05:04.0: Slot initialization failed (Posix.py:1042)
(104) [7] [2024-04-11 13:43:34.269] [ ] >>> [ 0.721804] shpchp 0000:05:04.0: vgaarb: pci_notify (Posix.py:1042)
(105) [7] [2024-04-11 13:43:34.269] [ ] >>> [ 0.721815] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 (Posix.py:1042)
(106) [7] [2024-04-11 13:43:34.269] [ ] >>> [ 0.721834] efifb: probing for efifb (Posix.py:1042)
(107) [7] [2024-04-11 13:43:34.269] [ ] >>> [ 0.721847] efifb: framebuffer at 0x80000000, using 3600k, total 3600k (Posix.py:1042)
(108) [7] [2024-04-11 13:43:34.269] [ ] >>> [ 0.721849] efifb: mode is 1280x720x32, linelength=5120, pages=1 (Posix.py:1042)
(109) [7] [2024-04-11 13:43:34.269] [ ] >>> [ 0.721850] efifb: scrolling: redraw (Posix.py:1042)
(110) [7] [2024-04-11 13:43:34.269] [ ] >>> [ 0.721850] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 (Posix.py:1042)
(111) [7] [2024-04-11 13:43:34.269] [ ] >>> [ 0.721961] Console: switching to colour frame buffer device 160x45 (Posix.py:1042)
(112) [7] [2024-04-11 13:43:34.269] [ ] >>> [ 0.723745] fb0: EFI VGA frame buffer device (Posix.py:1042)
(113) [7] [2024-04-11 13:43:34.269] [ ] >>> [ 0.729106] Non-volatile memory driver v1.3 (Posix.py:1042)
(114) [7] [2024-04-11 13:43:34.269] [ ] >>> [ 0.729146] Linux agpgart interface v0.103 (Posix.py:1042)
(115) [7] [2024-04-11 13:43:34.269] [ ] >>> [ 0.729172] ACPI: bus type drm_connector registered (Posix.py:1042)
(116) [7] [2024-04-11 13:43:34.269] [ ] >>> [ 0.729495] lpc_ich 0000:00:1f.0: vgaarb: pci_notify (Posix.py:1042)
(117) [7] [2024-04-11 13:43:34.269] [ ] >>> [ 0.729498] lpc_ich 0000:00:1f.0: runtime IRQ mapping not provided by arch (Posix.py:1042)
(118) [7] [2024-04-11 13:43:34.269] [ ] >>> [ 0.729603] lpc_ich 0000:00:1f.0: I/O space for GPIO uninitialized (Posix.py:1042)
(119) [7] [2024-04-11 13:43:34.269] [ ] >>> [ 0.729611] lpc_ich 0000:00:1f.0: vgaarb: pci_notify (Posix.py:1042)
(120) [7] [2024-04-11 13:43:34.269] [ ] >>> [ 0.729629] Loading iSCSI transport class v2.0-870. (Posix.py:1042)
(121) [7] [2024-04-11 13:43:34.269] [ ] >>> [ 0.729710] rdac: device handler registered (Posix.py:1042)
(122) [7] [2024-04-11 13:43:34.269] [ ] >>> [ 0.729735] hp_sw: device handler registered (Posix.py:1042)
(123) [7] [2024-04-11 13:43:34.270] [ ] >>> [ 0.729736] emc: device handler registered (Posix.py:1042)
(124) [7] [2024-04-11 13:43:34.270] [ ] >>> [ 0.729760] alua: device handler registered (Posix.py:1042)
(125) [7] [2024-04-11 13:43:34.270] [ ] >>> [ 0.729761] mpt3sas version 43.100.00.00 loaded (Posix.py:1042)
(126) [7] [2024-04-11 13:43:34.270] [ ] >>> [ 0.729951] ahci 0000:00:1f.2: vgaarb: pci_notify (Posix.py:1042)
(127) [7] [2024-04-11 13:43:34.270] [ ] >>> [ 0.729954] ahci 0000:00:1f.2: runtime IRQ mapping not provided by arch (Posix.py:1042)
(128) [7] [2024-04-11 13:43:34.270] [ ] >>> [ 0.729961] ahci 0000:00:1f.2: version 3.0 (Posix.py:1042)
(129) [7] [2024-04-11 13:43:34.270] [ ] >>> [ 0.730711] ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 6 ports 1.5 Gbps 0x3f impl SATA mode (Posix.py:1042)
(130) [7] [2024-04-11 13:43:34.270] [ ] >>> [ 0.730715] ahci 0000:00:1f.2: flags: 64bit ncq only (Posix.py:1042)
(131) [7] [2024-04-11 13:43:34.270] [ ] >>> [ 0.731588] scsi host0: ahci (Posix.py:1042)
(132) [7] [2024-04-11 13:43:34.270] [ ] >>> [ 0.731692] scsi host1: ahci (Posix.py:1042)
(133) [7] [2024-04-11 13:43:34.270] [ ] >>> [ 0.731773] scsi host2: ahci (Posix.py:1042)
(134) [7] [2024-04-11 13:43:34.270] [ ] >>> [ 0.731850] scsi host3: ahci (Posix.py:1042)
(135) [7] [2024-04-11 13:43:34.270] [ ] >>> [ 0.731926] scsi host4: ahci (Posix.py:1042)
(136) [7] [2024-04-11 13:43:34.270] [ ] >>> [ 0.732002] scsi host5: ahci (Posix.py:1042)
(137) [7] [2024-04-11 13:43:34.270] [ ] >>> [ 0.732040] ata1: SATA max UDMA/133 abar m4096@0x82244000 port 0x82244100 irq 28 (Posix.py:1042)
(138) [7] [2024-04-11 13:43:34.270] [ ] >>> [ 0.732046] ata2: SATA max UDMA/133 abar m4096@0x82244000 port 0x82244180 irq 28 (Posix.py:1042)
(139) [7] [2024-04-11 13:43:34.270] [ ] >>> [ 0.732051] ata3: SATA max UDMA/133 abar m4096@0x82244000 port 0x82244200 irq 28 (Posix.py:1042)
(140) [7] [2024-04-11 13:43:34.270] [ ] >>> [ 0.732056] ata4: SATA max UDMA/133 abar m4096@0x82244000 port 0x82244280 irq 28 (Posix.py:1042)
(141) [7] [2024-04-11 13:43:34.270] [ ] >>> [ 0.732061] ata5: SATA max UDMA/133 abar m4096@0x82244000 port 0x82244300 irq 28 (Posix.py:1042)
(142) [7] [2024-04-11 13:43:34.270] [ ] >>> [ 0.732066] ata6: SATA max UDMA/133 abar m4096@0x82244000 port 0x82244380 irq 28 (Posix.py:1042)
(143) [7] [2024-04-11 13:43:34.270] [ ] >>> [ 0.732076] ahci 0000:00:1f.2: vgaarb: pci_notify (Posix.py:1042)
(144) [7] [2024-04-11 13:43:34.270] [ ] >>> [ 0.732769] scsi host6: pata_legacy (Posix.py:1042)
(145) [7] [2024-04-11 13:43:34.270] [ ] >>> [ 0.732792] ata7: PATA max PIO4 cmd 0x1f0 ctl 0x3f6 irq 14 (Posix.py:1042)
(146) [7] [2024-04-11 13:43:34.270] [ ] >>> [ 1.048264] ata3: SATA link down (SStatus 0 SControl 300) (Posix.py:1042)
(147) [7] [2024-04-11 13:43:34.270] [ ] >>> [ 1.048376] ata4: SATA link down (SStatus 0 SControl 300) (Posix.py:1042)
(148) [7] [2024-04-11 13:43:34.270] [ ] >>> [ 1.048478] ata5: SATA link down (SStatus 0 SControl 300) (Posix.py:1042)
(149) [7] [2024-04-11 13:43:34.270] [ ] >>> [ 1.048593] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) (Posix.py:1042)
(150) [7] [2024-04-11 13:43:34.270] [ ] >>> [ 1.048684] ata2.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100 (Posix.py:1042)
(151) [7] [2024-04-11 13:43:34.270] [ ] >>> [ 1.048687] ata2.00: applying bridge limits (Posix.py:1042)
(152) [7] [2024-04-11 13:43:34.270] [ ] >>> [ 1.048753] ata2.00: configured for UDMA/100 (Posix.py:1042)
(153) [7] [2024-04-11 13:43:34.270] [ ] >>> [ 1.048941] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) (Posix.py:1042)
(154) [7] [2024-04-11 13:43:34.270] [ ] >>> [ 1.048984] ata1.00: ATA-7: QEMU HARDDISK, 2.5+, max UDMA/100 (Posix.py:1042)
(155) [7] [2024-04-11 13:43:34.270] [ ] >>> [ 1.048986] ata1.00: 134217728 sectors, multi 16: LBA48 NCQ (depth 32) (Posix.py:1042)
(156) [7] [2024-04-11 13:43:34.270] [ ] >>> [ 1.048989] ata1.00: applying bridge limits (Posix.py:1042)
(157) [7] [2024-04-11 13:43:34.270] [ ] >>> [ 1.049052] ata1.00: configured for UDMA/100 (Posix.py:1042)
(158) [7] [2024-04-11 13:43:34.270] [ ] >>> [ 1.049135] ata6: SATA link down (SStatus 0 SControl 300) (Posix.py:1042)
(159) [7] [2024-04-11 13:43:34.270] [ ] >>> [ 1.049178] scsi 0:0:0:0: Direct-Access ATA QEMU HARDDISK 2.5+ PQ: 0 ANSI: 5 (Posix.py:1042)
(160) [7] [2024-04-11 13:43:34.271] [ ] >>> [ 1.049351] scsi 0:0:0:0: Attached scsi generic sg0 type 0 (Posix.py:1042)
(161) [7] [2024-04-11 13:43:34.271] [ ] >>> [ 1.049488] scsi 1:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5 (Posix.py:1042)
(162) [7] [2024-04-11 13:43:34.271] [ ] >>> [ 1.049748] sd 0:0:0:0: [sda] 134217728 512-byte logical blocks: (68.7 GB/64.0 GiB) (Posix.py:1042)
(163) [7] [2024-04-11 13:43:34.271] [ ] >>> [ 1.049758] sd 0:0:0:0: [sda] Write Protect is off (Posix.py:1042)
(164) [7] [2024-04-11 13:43:34.271] [ ] >>> [ 1.049760] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 (Posix.py:1042)
(165) [7] [2024-04-11 13:43:34.271] [ ] >>> [ 1.049767] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA (Posix.py:1042)
(166) [7] [2024-04-11 13:43:34.271] [ ] >>> [ 1.049778] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes (Posix.py:1042)
(167) [7] [2024-04-11 13:43:34.271] [ ] >>> [ 1.050941] sd 0:0:0:0: [sda] Attached SCSI disk (Posix.py:1042)
(168) [7] [2024-04-11 13:43:34.271] [ ] >>> [ 1.064369] scsi 1:0:0:0: Attached scsi generic sg1 type 5 (Posix.py:1042)
(169) [7] [2024-04-11 13:43:34.271] [ ] >>> [ 1.081952] scsi host6: pata_legacy (Posix.py:1042)
(170) [7] [2024-04-11 13:43:34.271] [ ] >>> [ 1.081981] ata8: PATA max PIO4 cmd 0x170 ctl 0x376 irq 15 (Posix.py:1042)
(171) [7] [2024-04-11 13:43:34.271] [ ] >>> [ 1.281884] mdio_bus fixed-0: using lookup tables for GPIO lookup (Posix.py:1042)
(172) [7] [2024-04-11 13:43:34.271] [ ] >>> [ 1.281888] mdio_bus fixed-0: No GPIO consumer reset found (Posix.py:1042)
(173) [7] [2024-04-11 13:43:34.271] [ ] >>> [ 1.282145] Fusion MPT base driver 3.04.20 (Posix.py:1042)
(174) [7] [2024-04-11 13:43:34.271] [ ] >>> [ 1.282146] Copyright (c) 1999-2008 LSI Corporation (Posix.py:1042)
(175) [7] [2024-04-11 13:43:34.271] [ ] >>> [ 1.282151] Fusion MPT SPI Host driver 3.04.20 (Posix.py:1042)
(176) [7] [2024-04-11 13:43:34.271] [ ] >>> [ 1.282161] Fusion MPT SAS Host driver 3.04.20 (Posix.py:1042)
(177) [7] [2024-04-11 13:43:34.271] [ ] >>> [ 1.282168] Fusion MPT misc device (ioctl) driver 3.04.20 (Posix.py:1042)
(178) [7] [2024-04-11 13:43:34.271] [ ] >>> [ 1.282191] mptctl: Registered with Fusion MPT base driver (Posix.py:1042)
(179) [7] [2024-04-11 13:43:34.271] [ ] >>> [ 1.282192] mptctl: /dev/mptctl @ (major,minor=10,220) (Posix.py:1042)
(180) [7] [2024-04-11 13:43:34.271] [ ] >>> [ 1.282257] uhci_hcd 0000:00:1a.0: vgaarb: pci_notify (Posix.py:1042)
(181) [7] [2024-04-11 13:43:34.271] [ ] >>> [ 1.282261] uhci_hcd 0000:00:1a.0: runtime IRQ mapping not provided by arch (Posix.py:1042)
(182) [7] [2024-04-11 13:43:34.271] [ ] >>> [ 1.282532] uhci_hcd 0000:00:1a.0: enabling bus mastering (Posix.py:1042)
(183) [7] [2024-04-11 13:43:34.271] [ ] >>> [ 1.282945] uhci_hcd 0000:00:1a.0: UHCI Host Controller (Posix.py:1042)
(184) [7] [2024-04-11 13:43:34.271] [ ] >>> [ 1.282953] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 (Posix.py:1042)
(185) [7] [2024-04-11 13:43:34.271] [ ] >>> [ 1.283063] uhci_hcd 0000:00:1a.0: irq 16, io port 0x00007100 (Posix.py:1042)
(186) [7] [2024-04-11 13:43:34.271] [ ] >>> [ 1.283134] ehci-pci 0000:00:1a.7: vgaarb: pci_notify (Posix.py:1042)
(187) [7] [2024-04-11 13:43:34.271] [ ] >>> [ 1.283137] ehci-pci 0000:00:1a.7: runtime IRQ mapping not provided by arch (Posix.py:1042)
(188) [7] [2024-04-11 13:43:34.271] [ ] >>> [ 1.283370] ehci-pci 0000:00:1a.7: enabling bus mastering (Posix.py:1042)
(189) [7] [2024-04-11 13:43:34.271] [ ] >>> [ 1.283693] ehci-pci 0000:00:1d.7: vgaarb: pci_notify (Posix.py:1042)
(190) [7] [2024-04-11 13:43:34.271] [ ] >>> [ 1.283697] ehci-pci 0000:00:1d.7: runtime IRQ mapping not provided by arch (Posix.py:1042)
(191) [7] [2024-04-11 13:43:34.271] [ ] >>> [ 1.283910] ehci-pci 0000:00:1d.7: enabling bus mastering (Posix.py:1042)
(192) [7] [2024-04-11 13:43:34.271] [ ] >>> [ 1.284283] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.05 (Posix.py:1042)
(193) [7] [2024-04-11 13:43:34.271] [ ] >>> [ 1.284285] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 (Posix.py:1042)
(194) [7] [2024-04-11 13:43:34.272] [ ] >>> [ 1.284287] usb usb1: Product: UHCI Host Controller (Posix.py:1042)
(195) [7] [2024-04-11 13:43:34.272] [ ] >>> [ 1.284288] usb usb1: Manufacturer: Linux 6.5.12 uhci_hcd (Posix.py:1042)
(196) [7] [2024-04-11 13:43:34.272] [ ] >>> [ 1.284289] usb usb1: SerialNumber: 0000:00:1a.0 (Posix.py:1042)
(197) [7] [2024-04-11 13:43:34.272] [ ] >>> [ 1.284369] hub 1-0:1.0: USB hub found (Posix.py:1042)
(198) [7] [2024-04-11 13:43:34.272] [ ] >>> [ 1.284373] hub 1-0:1.0: 2 ports detected (Posix.py:1042)
(199) [7] [2024-04-11 13:43:34.272] [ ] >>> [ 1.284471] uhci_hcd 0000:00:1a.0: vgaarb: pci_notify (Posix.py:1042)
(200) [7] [2024-04-11 13:43:34.272] [ ] >>> [ 1.284477] uhci_hcd 0000:00:1a.1: vgaarb: pci_notify (Posix.py:1042)
(201) [7] [2024-04-11 13:43:34.272] [ ] >>> [ 1.284479] uhci_hcd 0000:00:1a.1: runtime IRQ mapping not provided by arch (Posix.py:1042)
(202) [7] [2024-04-11 13:43:34.272] [ ] >>> [ 1.284698] uhci_hcd 0000:00:1a.1: enabling bus mastering (Posix.py:1042)
(203) [7] [2024-04-11 13:43:34.272] [ ] >>> [ 1.285019] uhci_hcd 0000:00:1a.1: UHCI Host Controller (Posix.py:1042)
(204) [7] [2024-04-11 13:43:34.272] [ ] >>> [ 1.285023] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2 (Posix.py:1042)
(205) [7] [2024-04-11 13:43:34.272] [ ] >>> [ 1.285118] uhci_hcd 0000:00:1a.1: irq 17, io port 0x000070e0 (Posix.py:1042)
(206) [7] [2024-04-11 13:43:34.272] [ ] >>> [ 1.285185] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.05 (Posix.py:1042)
(207) [7] [2024-04-11 13:43:34.272] [ ] >>> [ 1.285187] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 (Posix.py:1042)
(208) [7] [2024-04-11 13:43:34.272] [ ] >>> [ 1.285189] usb usb2: Product: UHCI Host Controller (Posix.py:1042)
(209) [7] [2024-04-11 13:43:34.272] [ ] >>> [ 1.285190] usb usb2: Manufacturer: Linux 6.5.12 uhci_hcd (Posix.py:1042)
(210) [7] [2024-04-11 13:43:34.272] [ ] >>> [ 1.285191] usb usb2: SerialNumber: 0000:00:1a.1 (Posix.py:1042)
(211) [7] [2024-04-11 13:43:34.272] [ ] >>> [ 1.285250] hub 2-0:1.0: USB hub found (Posix.py:1042)
(212) [7] [2024-04-11 13:43:34.272] [ ] >>> [ 1.285254] hub 2-0:1.0: 2 ports detected (Posix.py:1042)
(213) [7] [2024-04-11 13:43:34.272] [ ] >>> [ 1.285458] ehci-pci 0000:00:1a.7: EHCI Host Controller (Posix.py:1042)
(214) [7] [2024-04-11 13:43:34.272] [ ] >>> [ 1.285462] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 3 (Posix.py:1042)
(215) [7] [2024-04-11 13:43:34.272] [ ] >>> [ 1.285573] ehci-pci 0000:00:1a.7: enabling Mem-Wr-Inval (Posix.py:1042)
(216) [7] [2024-04-11 13:43:34.272] [ ] >>> [ 1.285615] ehci-pci 0000:00:1a.7: irq 19, io mem 0x8224a000 (Posix.py:1042)
(217) [7] [2024-04-11 13:43:34.272] [ ] >>> [ 1.285660] uhci_hcd 0000:00:1a.1: vgaarb: pci_notify (Posix.py:1042)
(218) [7] [2024-04-11 13:43:34.272] [ ] >>> [ 1.285666] uhci_hcd 0000:00:1a.2: vgaarb: pci_notify (Posix.py:1042)
(219) [7] [2024-04-11 13:43:34.272] [ ] >>> [ 1.285668] uhci_hcd 0000:00:1a.2: runtime IRQ mapping not provided by arch (Posix.py:1042)
(220) [7] [2024-04-11 13:43:34.272] [ ] >>> [ 1.285897] uhci_hcd 0000:00:1a.2: enabling bus mastering (Posix.py:1042)
(221) [7] [2024-04-11 13:43:34.272] [ ] >>> [ 1.300188] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00 (Posix.py:1042)
(222) [7] [2024-04-11 13:43:34.272] [ ] >>> [ 1.300231] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05 (Posix.py:1042)
(223) [7] [2024-04-11 13:43:34.272] [ ] >>> [ 1.300233] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 (Posix.py:1042)
(224) [7] [2024-04-11 13:43:34.272] [ ] >>> [ 1.300235] usb usb3: Product: EHCI Host Controller (Posix.py:1042)
(225) [7] [2024-04-11 13:43:34.272] [ ] >>> [ 1.300236] usb usb3: Manufacturer: Linux 6.5.12 ehci_hcd (Posix.py:1042)
(226) [7] [2024-04-11 13:43:34.272] [ ] >>> [ 1.300237] usb usb3: SerialNumber: 0000:00:1a.7 (Posix.py:1042)
(227) [7] [2024-04-11 13:43:34.273] [ ] >>> [ 1.300324] hub 3-0:1.0: USB hub found (Posix.py:1042)
(228) [7] [2024-04-11 13:43:34.273] [ ] >>> [ 1.300331] hub 3-0:1.0: 6 ports detected (Posix.py:1042)
(229) [7] [2024-04-11 13:43:34.273] [ ] >>> [ 1.328229] hub 1-0:1.0: USB hub found (Posix.py:1042)
(230) [7] [2024-04-11 13:43:34.273] [ ] >>> [ 1.328236] hub 1-0:1.0: 2 ports detected (Posix.py:1042)
(231) [7] [2024-04-11 13:43:34.273] [ ] >>> [ 1.356241] hub 2-0:1.0: USB hub found (Posix.py:1042)
(232) [7] [2024-04-11 13:43:34.273] [ ] >>> [ 1.356249] hub 2-0:1.0: 2 ports detected (Posix.py:1042)
(233) [7] [2024-04-11 13:43:34.273] [ ] >>> [ 1.356303] ehci-pci 0000:00:1a.7: vgaarb: pci_notify (Posix.py:1042)
(234) [7] [2024-04-11 13:43:34.273] [ ] >>> [ 1.356318] ehci-pci 0000:00:1d.7: EHCI Host Controller (Posix.py:1042)
(235) [7] [2024-04-11 13:43:34.273] [ ] >>> [ 1.356322] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 4 (Posix.py:1042)
(236) [7] [2024-04-11 13:43:34.273] [ ] >>> [ 1.356442] ehci-pci 0000:00:1d.7: enabling Mem-Wr-Inval (Posix.py:1042)
(237) [7] [2024-04-11 13:43:34.273] [ ] >>> [ 1.356455] ehci-pci 0000:00:1d.7: irq 19, io mem 0x82245000 (Posix.py:1042)
(238) [7] [2024-04-11 13:43:34.273] [ ] >>> [ 1.372180] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 (Posix.py:1042)
(239) [7] [2024-04-11 13:43:34.273] [ ] >>> [ 1.372221] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05 (Posix.py:1042)
(240) [7] [2024-04-11 13:43:34.273] [ ] >>> [ 1.372224] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 (Posix.py:1042)
(241) [7] [2024-04-11 13:43:34.273] [ ] >>> [ 1.372225] usb usb4: Product: EHCI Host Controller (Posix.py:1042)
(242) [7] [2024-04-11 13:43:34.273] [ ] >>> [ 1.372226] usb usb4: Manufacturer: Linux 6.5.12 ehci_hcd (Posix.py:1042)
(243) [7] [2024-04-11 13:43:34.273] [ ] >>> [ 1.372227] usb usb4: SerialNumber: 0000:00:1d.7 (Posix.py:1042)
(244) [7] [2024-04-11 13:43:34.273] [ ] >>> [ 1.372311] hub 4-0:1.0: USB hub found (Posix.py:1042)
(245) [7] [2024-04-11 13:43:34.273] [ ] >>> [ 1.372315] hub 4-0:1.0: 6 ports detected (Posix.py:1042)
(246) [7] [2024-04-11 13:43:34.273] [ ] >>> [ 1.372466] ehci-pci 0000:00:1d.7: vgaarb: pci_notify (Posix.py:1042)
(247) [7] [2024-04-11 13:43:34.273] [ ] >>> [ 1.372473] uhci_hcd 0000:00:1a.2: UHCI Host Controller (Posix.py:1042)
(248) [7] [2024-04-11 13:43:34.273] [ ] >>> [ 1.372477] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 (Posix.py:1042)
(249) [7] [2024-04-11 13:43:34.273] [ ] >>> [ 1.372583] uhci_hcd 0000:00:1a.2: irq 18, io port 0x000070c0 (Posix.py:1042)
(250) [7] [2024-04-11 13:43:34.273] [ ] >>> [ 1.372645] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.05 (Posix.py:1042)
(251) [7] [2024-04-11 13:43:34.273] [ ] >>> [ 1.372647] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 (Posix.py:1042)
(252) [7] [2024-04-11 13:43:34.273] [ ] >>> [ 1.372648] usb usb5: Product: UHCI Host Controller (Posix.py:1042)
(253) [7] [2024-04-11 13:43:34.273] [ ] >>> [ 1.372649] usb usb5: Manufacturer: Linux 6.5.12 uhci_hcd (Posix.py:1042)
(254) [7] [2024-04-11 13:43:34.273] [ ] >>> [ 1.372650] usb usb5: SerialNumber: 0000:00:1a.2 (Posix.py:1042)
(255) [7] [2024-04-11 13:43:34.273] [ ] >>> [ 1.372709] hub 5-0:1.0: USB hub found (Posix.py:1042)
(256) [7] [2024-04-11 13:43:34.273] [ ] >>> [ 1.372713] hub 5-0:1.0: 2 ports detected (Posix.py:1042)
(257) [7] [2024-04-11 13:43:34.273] [ ] >>> [ 1.372797] uhci_hcd 0000:00:1a.2: vgaarb: pci_notify (Posix.py:1042)
(258) [7] [2024-04-11 13:43:34.273] [ ] >>> [ 1.372804] uhci_hcd 0000:00:1d.0: vgaarb: pci_notify (Posix.py:1042)
(259) [7] [2024-04-11 13:43:34.273] [ ] >>> [ 1.372807] uhci_hcd 0000:00:1d.0: runtime IRQ mapping not provided by arch (Posix.py:1042)
(260) [7] [2024-04-11 13:43:34.273] [ ] >>> [ 1.373042] uhci_hcd 0000:00:1d.0: enabling bus mastering (Posix.py:1042)
(261) [7] [2024-04-11 13:43:34.273] [ ] >>> [ 1.373429] uhci_hcd 0000:00:1d.0: UHCI Host Controller (Posix.py:1042)
(262) [7] [2024-04-11 13:43:34.274] [ ] >>> [ 1.373433] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 (Posix.py:1042)
(263) [7] [2024-04-11 13:43:34.274] [ ] >>> [ 1.373495] uhci_hcd 0000:00:1d.0: irq 16, io port 0x000070a0 (Posix.py:1042)
(264) [7] [2024-04-11 13:43:34.274] [ ] >>> [ 1.373557] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.05 (Posix.py:1042)
(265) [7] [2024-04-11 13:43:34.274] [ ] >>> [ 1.373559] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 (Posix.py:1042)
(266) [7] [2024-04-11 13:43:34.274] [ ] >>> [ 1.373560] usb usb6: Product: UHCI Host Controller (Posix.py:1042)
(267) [7] [2024-04-11 13:43:34.274] [ ] >>> [ 1.373561] usb usb6: Manufacturer: Linux 6.5.12 uhci_hcd (Posix.py:1042)
(268) [7] [2024-04-11 13:43:34.274] [ ] >>> [ 1.373562] usb usb6: SerialNumber: 0000:00:1d.0 (Posix.py:1042)
(269) [7] [2024-04-11 13:43:34.274] [ ] >>> [ 1.373625] hub 6-0:1.0: USB hub found (Posix.py:1042)
(270) [7] [2024-04-11 13:43:34.274] [ ] >>> [ 1.373629] hub 6-0:1.0: 2 ports detected (Posix.py:1042)
(271) [7] [2024-04-11 13:43:34.274] [ ] >>> [ 1.373714] uhci_hcd 0000:00:1d.0: vgaarb: pci_notify (Posix.py:1042)
(272) [7] [2024-04-11 13:43:34.274] [ ] >>> [ 1.373720] uhci_hcd 0000:00:1d.1: vgaarb: pci_notify (Posix.py:1042)
(273) [7] [2024-04-11 13:43:34.274] [ ] >>> [ 1.373722] uhci_hcd 0000:00:1d.1: runtime IRQ mapping not provided by arch (Posix.py:1042)
(274) [7] [2024-04-11 13:43:34.274] [ ] >>> [ 1.373940] uhci_hcd 0000:00:1d.1: enabling bus mastering (Posix.py:1042)
(275) [7] [2024-04-11 13:43:34.274] [ ] >>> [ 1.374253] uhci_hcd 0000:00:1d.1: UHCI Host Controller (Posix.py:1042)
(276) [7] [2024-04-11 13:43:34.274] [ ] >>> [ 1.374257] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 (Posix.py:1042)
(277) [7] [2024-04-11 13:43:34.274] [ ] >>> [ 1.374317] uhci_hcd 0000:00:1d.1: irq 17, io port 0x00007080 (Posix.py:1042)
(278) [7] [2024-04-11 13:43:34.274] [ ] >>> [ 1.374371] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.05 (Posix.py:1042)
(279) [7] [2024-04-11 13:43:34.274] [ ] >>> [ 1.374373] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 (Posix.py:1042)
(280) [7] [2024-04-11 13:43:34.274] [ ] >>> [ 1.374374] usb usb7: Product: UHCI Host Controller (Posix.py:1042)
(281) [7] [2024-04-11 13:43:34.274] [ ] >>> [ 1.374375] usb usb7: Manufacturer: Linux 6.5.12 uhci_hcd (Posix.py:1042)
(282) [7] [2024-04-11 13:43:34.274] [ ] >>> [ 1.374376] usb usb7: SerialNumber: 0000:00:1d.1 (Posix.py:1042)
(283) [7] [2024-04-11 13:43:34.274] [ ] >>> [ 1.374445] hub 7-0:1.0: USB hub found (Posix.py:1042)
(284) [7] [2024-04-11 13:43:34.274] [ ] >>> [ 1.374449] hub 7-0:1.0: 2 ports detected (Posix.py:1042)
(285) [7] [2024-04-11 13:43:34.274] [ ] >>> [ 1.374578] uhci_hcd 0000:00:1d.1: vgaarb: pci_notify (Posix.py:1042)
(286) [7] [2024-04-11 13:43:34.274] [ ] >>> [ 1.374583] uhci_hcd 0000:00:1d.2: vgaarb: pci_notify (Posix.py:1042)
(287) [7] [2024-04-11 13:43:34.274] [ ] >>> [ 1.374585] uhci_hcd 0000:00:1d.2: runtime IRQ mapping not provided by arch (Posix.py:1042)
(288) [7] [2024-04-11 13:43:34.274] [ ] >>> [ 1.374792] uhci_hcd 0000:00:1d.2: enabling bus mastering (Posix.py:1042)
(289) [7] [2024-04-11 13:43:34.274] [ ] >>> [ 1.375098] uhci_hcd 0000:00:1d.2: UHCI Host Controller (Posix.py:1042)
(290) [7] [2024-04-11 13:43:34.274] [ ] >>> [ 1.375102] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 (Posix.py:1042)
(291) [7] [2024-04-11 13:43:34.274] [ ] >>> [ 1.375160] uhci_hcd 0000:00:1d.2: irq 18, io port 0x00007060 (Posix.py:1042)
(292) [7] [2024-04-11 13:43:34.274] [ ] >>> [ 1.375211] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.05 (Posix.py:1042)
(293) [7] [2024-04-11 13:43:34.274] [ ] >>> [ 1.375213] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 (Posix.py:1042)
(294) [7] [2024-04-11 13:43:34.274] [ ] >>> [ 1.375215] usb usb8: Product: UHCI Host Controller (Posix.py:1042)
(295) [7] [2024-04-11 13:43:34.274] [ ] >>> [ 1.375215] usb usb8: Manufacturer: Linux 6.5.12 uhci_hcd (Posix.py:1042)
(296) [7] [2024-04-11 13:43:34.274] [ ] >>> [ 1.375216] usb usb8: SerialNumber: 0000:00:1d.2 (Posix.py:1042)
(297) [7] [2024-04-11 13:43:34.274] [ ] >>> [ 1.375275] hub 8-0:1.0: USB hub found (Posix.py:1042)
(298) [7] [2024-04-11 13:43:34.275] [ ] >>> [ 1.375279] hub 8-0:1.0: 2 ports detected (Posix.py:1042)
(299) [7] [2024-04-11 13:43:34.275] [ ] >>> [ 1.375359] uhci_hcd 0000:00:1d.2: vgaarb: pci_notify (Posix.py:1042)
(300) [7] [2024-04-11 13:43:34.275] [ ] >>> [ 1.375419] usbcore: registered new interface driver cdc_acm (Posix.py:1042)
(301) [7] [2024-04-11 13:43:34.275] [ ] >>> [ 1.375420] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters (Posix.py:1042)
(302) [7] [2024-04-11 13:43:34.275] [ ] >>> [ 1.375424] usbcore: registered new interface driver cdc_wdm (Posix.py:1042)
(303) [7] [2024-04-11 13:43:34.275] [ ] >>> [ 1.375466] usbcore: registered new interface driver uas (Posix.py:1042)
(304) [7] [2024-04-11 13:43:34.275] [ ] >>> [ 1.375487] usbcore: registered new interface driver usb-storage (Posix.py:1042)
(305) [7] [2024-04-11 13:43:34.275] [ ] >>> [ 1.375491] usbcore: registered new interface driver ums-alauda (Posix.py:1042)
(306) [7] [2024-04-11 13:43:34.275] [ ] >>> [ 1.375495] usbcore: registered new interface driver ums-datafab (Posix.py:1042)
(307) [7] [2024-04-11 13:43:34.275] [ ] >>> [ 1.375499] usbcore: registered new interface driver ums-freecom (Posix.py:1042)
(308) [7] [2024-04-11 13:43:34.275] [ ] >>> [ 1.375503] usbcore: registered new interface driver ums-isd200 (Posix.py:1042)
(309) [7] [2024-04-11 13:43:34.275] [ ] >>> [ 1.375507] usbcore: registered new interface driver ums-jumpshot (Posix.py:1042)
(310) [7] [2024-04-11 13:43:34.275] [ ] >>> [ 1.375510] usbcore: registered new interface driver ums-onetouch (Posix.py:1042)
(311) [7] [2024-04-11 13:43:34.275] [ ] >>> [ 1.375514] usbcore: registered new interface driver ums-sddr09 (Posix.py:1042)
(312) [7] [2024-04-11 13:43:34.275] [ ] >>> [ 1.375518] usbcore: registered new interface driver ums-sddr55 (Posix.py:1042)
(313) [7] [2024-04-11 13:43:34.275] [ ] >>> [ 1.375522] usbcore: registered new interface driver ums-usbat (Posix.py:1042)
(314) [7] [2024-04-11 13:43:34.275] [ ] >>> [ 1.375561] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 (Posix.py:1042)
(315) [7] [2024-04-11 13:43:34.275] [ ] >>> [ 1.376216] serio: i8042 KBD port at 0x60,0x64 irq 1 (Posix.py:1042)
(316) [7] [2024-04-11 13:43:34.275] [ ] >>> [ 1.376223] serio: i8042 AUX port at 0x60,0x64 irq 12 (Posix.py:1042)
(317) [7] [2024-04-11 13:43:34.275] [ ] >>> [ 1.376231] hv_vmbus: registering driver hyperv_keyboard (Posix.py:1042)
(318) [7] [2024-04-11 13:43:34.275] [ ] >>> [ 1.376274] mousedev: PS/2 mouse device common for all mice (Posix.py:1042)
(319) [7] [2024-04-11 13:43:34.275] [ ] >>> [ 1.376337] rtc_cmos 00:02: RTC can wake from S4 (Posix.py:1042)
(320) [7] [2024-04-11 13:43:34.275] [ ] >>> [ 1.376687] rtc_cmos 00:02: registered as rtc0 (Posix.py:1042)
(321) [7] [2024-04-11 13:43:34.275] [ ] >>> [ 1.376740] rtc_cmos 00:02: setting system clock to 2024-04-11T13:43:16 UTC (1712842996) (Posix.py:1042)
(322) [7] [2024-04-11 13:43:34.275] [ ] >>> [ 1.376747] rtc_cmos 00:02: using ACPI '\_SB.PCI0.SF8.RTC' for 'wp' GPIO lookup (Posix.py:1042)
(323) [7] [2024-04-11 13:43:34.275] [ ] >>> [ 1.376754] acpi PNP0B00:00: GPIO: looking up wp-gpios (Posix.py:1042)
(324) [7] [2024-04-11 13:43:34.275] [ ] >>> [ 1.376756] acpi PNP0B00:00: GPIO: looking up wp-gpio (Posix.py:1042)
(325) [7] [2024-04-11 13:43:34.275] [ ] >>> [ 1.376756] rtc_cmos 00:02: using lookup tables for GPIO lookup (Posix.py:1042)
(326) [7] [2024-04-11 13:43:34.275] [ ] >>> [ 1.376757] rtc_cmos 00:02: No GPIO consumer wp found (Posix.py:1042)
(327) [7] [2024-04-11 13:43:34.275] [ ] >>> [ 1.376802] rtc_cmos 00:02: alarms up to one day, y3k, 242 bytes nvram (Posix.py:1042)
(328) [7] [2024-04-11 13:43:34.275] [ ] >>> [ 1.376824] IR JVC protocol handler initialized (Posix.py:1042)
(329) [7] [2024-04-11 13:43:34.275] [ ] >>> [ 1.376825] IR MCE Keyboard/mouse protocol handler initialized (Posix.py:1042)
(330) [7] [2024-04-11 13:43:34.275] [ ] >>> [ 1.376826] IR NEC protocol handler initialized (Posix.py:1042)
(331) [7] [2024-04-11 13:43:34.275] [ ] >>> [ 1.376826] IR RC5(x/sz) protocol handler initialized (Posix.py:1042)
(332) [7] [2024-04-11 13:43:34.275] [ ] >>> [ 1.376827] IR RC6 protocol handler initialized (Posix.py:1042)
(333) [7] [2024-04-11 13:43:34.275] [ ] >>> [ 1.376828] IR SANYO protocol handler initialized (Posix.py:1042)
(334) [7] [2024-04-11 13:43:34.276] [ ] >>> [ 1.376828] IR Sharp protocol handler initialized (Posix.py:1042)
(335) [7] [2024-04-11 13:43:34.276] [ ] >>> [ 1.376829] IR Sony protocol handler initialized (Posix.py:1042)
(336) [7] [2024-04-11 13:43:34.276] [ ] >>> [ 1.376829] IR XMP protocol handler initialized (Posix.py:1042)
(337) [7] [2024-04-11 13:43:34.276] [ ] >>> [ 1.376864] Driver for 1-wire Dallas network protocol. (Posix.py:1042)
(338) [7] [2024-04-11 13:43:34.276] [ ] >>> [ 1.376947] hv_vmbus: registering driver hid_hyperv (Posix.py:1042)
(339) [7] [2024-04-11 13:43:34.276] [ ] >>> [ 1.376969] hv_utils: Registering HyperV Utility Driver (Posix.py:1042)
(340) [7] [2024-04-11 13:43:34.276] [ ] >>> [ 1.376970] hv_vmbus: registering driver hv_utils (Posix.py:1042)
(341) [7] [2024-04-11 13:43:34.276] [ ] >>> [ 1.376971] hv_vmbus: registering driver hv_balloon (Posix.py:1042)
(342) [7] [2024-04-11 13:43:34.276] [ ] >>> [ 1.377061] snd_hda_intel 0000:00:1b.0: vgaarb: pci_notify (Posix.py:1042)
(343) [7] [2024-04-11 13:43:34.276] [ ] >>> [ 1.377063] snd_hda_intel 0000:00:1b.0: runtime IRQ mapping not provided by arch (Posix.py:1042)
(344) [7] [2024-04-11 13:43:34.276] [ ] >>> [ 1.377281] snd_hda_intel 0000:00:1b.0: vgaarb: pci_notify (Posix.py:1042)
(345) [7] [2024-04-11 13:43:34.276] [ ] >>> [ 1.377359] NET: Registered PF_KEY protocol family (Posix.py:1042)
(346) [7] [2024-04-11 13:43:34.276] [ ] >>> [ 1.377638] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 (Posix.py:1042)
(347) [7] [2024-04-11 13:43:34.276] [ ] >>> [ 1.384291] snd_hda_intel 0000:00:1b.0: no codecs found! (Posix.py:1042)
(348) [7] [2024-04-11 13:43:34.276] [ ] >>> [ 1.628161] usb 4-1: new high-speed USB device number 2 using ehci-pci (Posix.py:1042)
(349) [7] [2024-04-11 13:43:34.276] [ ] >>> [ 1.786079] usb 4-1: New USB device found, idVendor=0627, idProduct=0001, bcdDevice= 0.00 (Posix.py:1042)
(350) [7] [2024-04-11 13:43:34.276] [ ] >>> [ 1.786084] usb 4-1: New USB device strings: Mfr=1, Product=3, SerialNumber=10 (Posix.py:1042)
(351) [7] [2024-04-11 13:43:34.276] [ ] >>> [ 1.786085] usb 4-1: Product: QEMU USB Tablet (Posix.py:1042)
(352) [7] [2024-04-11 13:43:34.276] [ ] >>> [ 1.786086] usb 4-1: Manufacturer: QEMU (Posix.py:1042)
(353) [7] [2024-04-11 13:43:34.276] [ ] >>> [ 1.786087] usb 4-1: SerialNumber: 28754-0000:00:1d.7-1 (Posix.py:1042)
(354) [7] [2024-04-11 13:43:34.276] [ ] >>> [ 1.989442] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input2 (Posix.py:1042)
(355) [7] [2024-04-11 13:43:34.276] [ ] >>> [ 2.001440] Freeing initrd memory: 160052K (Posix.py:1042)
(356) [7] [2024-04-11 13:43:34.276] [ ] >>> [ 2.004598] NET: Registered PF_RXRPC protocol family (Posix.py:1042)
(357) [7] [2024-04-11 13:43:34.276] [ ] >>> [ 2.004602] Key type rxrpc registered (Posix.py:1042)
(358) [7] [2024-04-11 13:43:34.276] [ ] >>> [ 2.004602] Key type rxrpc_s registered (Posix.py:1042)
(359) [7] [2024-04-11 13:43:34.276] [ ] >>> [ 2.004619] 9pnet: Installing 9P2000 support (Posix.py:1042)
(360) [7] [2024-04-11 13:43:34.276] [ ] >>> [ 2.004626] Key type dns_resolver registered (Posix.py:1042)
(361) [7] [2024-04-11 13:43:34.276] [ ] >>> [ 2.004631] Key type ceph registered (Posix.py:1042)
(362) [7] [2024-04-11 13:43:34.276] [ ] >>> [ 2.004738] libceph: loaded (mon/osd proto 15/24) (Posix.py:1042)
(363) [7] [2024-04-11 13:43:34.276] [ ] >>> [ 2.004991] IPI shorthand broadcast: enabled (Posix.py:1042)
(364) [7] [2024-04-11 13:43:34.276] [ ] >>> [ 2.004995] SSE version of gcm_enc/dec engaged. (Posix.py:1042)
(365) [7] [2024-04-11 13:43:34.276] [ ] >>> [ 2.006938] sched_clock: Marking stable (2002545100, 1599444)->(2008975462, -4830918) (Posix.py:1042)
(366) [7] [2024-04-11 13:43:34.276] [ ] >>> [ 2.007004] Loading compiled-in X.509 certificates (Posix.py:1042)
(367) [7] [2024-04-11 13:43:34.276] [ ] >>> [ 2.008180] Key type .fscrypt registered (Posix.py:1042)
(368) [7] [2024-04-11 13:43:34.276] [ ] >>> [ 2.008181] Key type fscrypt-provisioning registered (Posix.py:1042)
(369) [7] [2024-04-11 13:43:34.276] [ ] >>> [ 2.008398] Btrfs loaded, debug=on, zoned=no, fsverity=no (Posix.py:1042)
(370) [7] [2024-04-11 13:43:34.277] [ ] >>> [ 2.011302] Key type encrypted registered (Posix.py:1042)
(371) [7] [2024-04-11 13:43:34.277] [ ] >>> [ 2.011421] clk: Disabling unused clocks (Posix.py:1042)
(372) [7] [2024-04-11 13:43:34.277] [ ] >>> [ 2.011426] ALSA device list: (Posix.py:1042)
(373) [7] [2024-04-11 13:43:34.277] [ ] >>> [ 2.011427] #0: HDA Intel at 0x82240000 irq 29 (Posix.py:1042)
(374) [7] [2024-04-11 13:43:34.277] [ ] >>> [ 2.011434] Warning: unable to open an initial console. (Posix.py:1042)
(375) [7] [2024-04-11 13:43:34.277] [ ] >>> [ 2.011856] Freeing unused kernel image (initmem) memory: 2748K (Posix.py:1042)
(376) [7] [2024-04-11 13:43:34.277] [ ] >>> [ 2.028307] Write protecting the kernel read-only data: 22528k (Posix.py:1042)
(377) [7] [2024-04-11 13:43:34.277] [ ] >>> [ 2.028532] Freeing unused kernel image (rodata/data gap) memory: 64K (Posix.py:1042)
(378) [7] [2024-04-11 13:43:34.277] [ ] >>> [ 2.028597] rodata_test: all tests were successful (Posix.py:1042)
(379) [7] [2024-04-11 13:43:34.277] [ ] >>> [ 2.028604] Run /init as init process (Posix.py:1042)
(380) [7] [2024-04-11 13:43:34.277] [ ] >>> [ 2.028605] with arguments: (Posix.py:1042)
(381) [7] [2024-04-11 13:43:34.277] [ ] >>> [ 2.028605] /init (Posix.py:1042)
(382) [7] [2024-04-11 13:43:34.277] [ ] >>> [ 2.028606] --no-log (Posix.py:1042)
(383) [7] [2024-04-11 13:43:34.277] [ ] >>> [ 2.028606] with environment: (Posix.py:1042)
(384) [7] [2024-04-11 13:43:34.277] [ ] >>> [ 2.028607] HOME=/ (Posix.py:1042)
(385) [7] [2024-04-11 13:43:34.277] [ ] >>> [ 2.028619] TERM=linux (Posix.py:1042)
(386) [7] [2024-04-11 13:43:34.277] [ ] >>> [ 2.028620] BOOT_IMAGE=(pxe)/opsi/opsi-linux-bootimage/install-x64 (Posix.py:1042)
(387) [7] [2024-04-11 13:43:34.277] [ ] >>> [ 2.028620] vga=791 (Posix.py:1042)
(388) [7] [2024-04-11 13:43:34.277] [ ] >>> [ 2.028620] service=https://opsisrv:4447/rpc (Posix.py:1042)
(389) [7] [2024-04-11 13:43:34.277] [ ] >>> [ 2.028656] Failed to execute /init (error -13) (Posix.py:1042)
(390) [7] [2024-04-11 13:43:34.277] [ ] >>> [ 2.028657] Run /sbin/init as init process (Posix.py:1042)
(391) [7] [2024-04-11 13:43:34.277] [ ] >>> [ 2.028658] with arguments: (Posix.py:1042)
(392) [7] [2024-04-11 13:43:34.277] [ ] >>> [ 2.028658] /sbin/init (Posix.py:1042)
(393) [7] [2024-04-11 13:43:34.277] [ ] >>> [ 2.028659] --no-log (Posix.py:1042)
(394) [7] [2024-04-11 13:43:34.277] [ ] >>> [ 2.028659] with environment: (Posix.py:1042)
(395) [7] [2024-04-11 13:43:34.277] [ ] >>> [ 2.028659] HOME=/ (Posix.py:1042)
(396) [7] [2024-04-11 13:43:34.277] [ ] >>> [ 2.028660] TERM=linux (Posix.py:1042)
(397) [7] [2024-04-11 13:43:34.277] [ ] >>> [ 2.028660] BOOT_IMAGE=(pxe)/opsi/opsi-linux-bootimage/install-x64 (Posix.py:1042)
(398) [7] [2024-04-11 13:43:34.277] [ ] >>> [ 2.028661] vga=791 (Posix.py:1042)
(399) [7] [2024-04-11 13:43:34.277] [ ] >>> [ 2.028661] service=https://opsisrv:4447/rpc (Posix.py:1042)

(2000) [6] [2024-04-11 13:44:12.344] [ ] Found config state: licensing.client_limit_warning_days=['30'] (master.py:1713)
(2001) [6] [2024-04-11 13:44:12.344] [ ] Found config state: licensing.client_limit_warning_percent=['95'] (master.py:1713)
(2002) [6] [2024-04-11 13:44:12.344] [ ] Found config state: licensing.disable_warning_for_modules=[] (master.py:1713)
(2003) [6] [2024-04-11 13:44:12.344] [ ] Found config state: opsi-linux-bootimage.append=[] (master.py:1713)
(2004) [6] [2024-04-11 13:44:12.344] [ ] Found config state: opsi-script.global.autoactivitydisplay=[True] (master.py:1713)
(2005) [6] [2024-04-11 13:44:12.344] [ ] Found config state: opsi-script.global.debug_lib=[True] (master.py:1713)
(2006) [6] [2024-04-11 13:44:12.344] [ ] Found config state: opsi-script.global.debug_prog=[True] (master.py:1713)
(2007) [6] [2024-04-11 13:44:12.344] [ ] Found config state: opsi-script.global.default_loglevel=['7'] (master.py:1713)
(2008) [6] [2024-04-11 13:44:12.344] [ ] Found config state: opsi-script.global.force_min_loglevel=['0'] (master.py:1713)
(2009) [6] [2024-04-11 13:44:12.344] [ ] Found config state: opsi-script.global.log_rotation_count=['8'] (master.py:1713)
(2010) [6] [2024-04-11 13:44:12.345] [ ] Found config state: opsi-script.global.reverseproductorderbyuninstall=[True] (master.py:1713)
(2011) [6] [2024-04-11 13:44:12.345] [ ] Found config state: opsi-script.global.scripterrormessages=[True] (master.py:1713)
(2012) [6] [2024-04-11 13:44:12.345] [ ] Found config state: opsi-script.global.supresssystemencodingwarning=[False] (master.py:1713)
(2013) [6] [2024-04-11 13:44:12.345] [ ] Found config state: opsi-script.global.testsyntax=[False] (master.py:1713)
(2014) [6] [2024-04-11 13:44:12.345] [ ] Found config state: opsi-script.global.w10bitlockersuspendonreboot=[False] (master.py:1713)
(2015) [6] [2024-04-11 13:44:12.345] [ ] Found config state: opsi-script.global.writeproductlogfile=[True] (master.py:1713)
(2016) [6] [2024-04-11 13:44:12.345] [ ] Found config state: opsiclientd.config_service.permanent_connection=[True] (master.py:1713)
(2017) [6] [2024-04-11 13:44:12.345] [ ] Found config state: opsiclientd.event_gui_startup.active=[True] (master.py:1713)
(2018) [6] [2024-04-11 13:44:12.345] [ ] Found config state: opsiclientd.event_gui_startup{user_logged_in}.active=[True] (master.py:1713)
(2019) [6] [2024-04-11 13:44:12.345] [ ] Found config state: opsiclientd.event_on_shutdown.active=[False] (master.py:1713)
(2020) [6] [2024-04-11 13:44:12.345] [ ] Found config state: opsiclientd.event_timer.active=[False] (master.py:1713)
(2021) [6] [2024-04-11 13:44:12.345] [ ] Found config state: opsiclientd.global.install_opsi_ca_into_os_store=[True] (master.py:1713)
(2022) [6] [2024-04-11 13:44:12.345] [ ] Found config state: opsiclientd.global.max_log_transfer_size=['1'] (master.py:1713)
(2023) [6] [2024-04-11 13:44:12.345] [ ] Found config state: opsiclientd.global.verify_server_cert=[True] (master.py:1713)
(2024) [6] [2024-04-11 13:44:12.345] [ ] Found config state: software-on-demand.active=[False] (master.py:1713)
(2025) [6] [2024-04-11 13:44:12.346] [ ] Found config state: software-on-demand.admin-mode=[False] (master.py:1713)
(2026) [6] [2024-04-11 13:44:12.346] [ ] Found config state: software-on-demand.disable-tilesview=[False] (master.py:1713)
(2027) [6] [2024-04-11 13:44:12.346] [ ] Found config state: software-on-demand.installation-now-button=[True] (master.py:1713)
(2028) [6] [2024-04-11 13:44:12.346] [ ] Found config state: software-on-demand.product-group-ids=['software-on-demand'] (master.py:1713)
(2029) [6] [2024-04-11 13:44:12.346] [ ] Found config state: user.role.{default}.has_role=[''] (master.py:1713)
(2030) [6] [2024-04-11 13:44:12.346] [ ] Found config state: user.role.{default}.modified=['2024-03-14 14:15:43 set by role prototype'] (master.py:1713)
(2031) [6] [2024-04-11 13:44:12.346] [ ] Found config state: user.role.{default}.privilege.host.all.registered_readonly=[False] (master.py:1713)
(2032) [6] [2024-04-11 13:44:12.346] [ ] Found config state: user.role.{default}.privilege.host.createclient=[True] (master.py:1713)
(2033) [6] [2024-04-11 13:44:12.346] [ ] Found config state: user.role.{default}.privilege.host.depotaccess.configured=[False] (master.py:1713)
(2034) [6] [2024-04-11 13:44:12.346] [ ] Found config state: user.role.{default}.privilege.host.depotaccess.depots=[] (master.py:1713)
(2035) [6] [2024-04-11 13:44:12.346] [ ] Found config state: user.role.{default}.privilege.host.groupaccess.configured=[False] (master.py:1713)
(2036) [6] [2024-04-11 13:44:12.346] [ ] Found config state: user.role.{default}.privilege.host.groupaccess.hostgroups=[] (master.py:1713)
(2037) [6] [2024-04-11 13:44:12.346] [ ] Found config state: user.role.{default}.privilege.host.opsiserver.write=[True] (master.py:1713)
(2038) [6] [2024-04-11 13:44:12.346] [ ] Found config state: user.role.{default}.privilege.product.groupaccess.configured=[False] (master.py:1713)
(2039) [6] [2024-04-11 13:44:12.346] [ ] Found config state: user.role.{default}.privilege.product.groupaccess.productgroups=[] (master.py:1713)
(2040) [6] [2024-04-11 13:44:12.346] [ ] Found config state: user.role.{default}.ssh.commandmanagement.active=[False] (master.py:1713)
(2041) [6] [2024-04-11 13:44:12.346] [ ] Found config state: user.role.{default}.ssh.commands.active=[True] (master.py:1713)
(2042) [6] [2024-04-11 13:44:12.347] [ ] Found config state: user.role.{default}.ssh.menu_serverconsole.active=[True] (master.py:1713)
(2043) [6] [2024-04-11 13:44:12.347] [ ] Found config state: user.role.{default}.ssh.serverconfiguration.active=[True] (master.py:1713)
(2044) [6] [2024-04-11 13:44:12.347] [ ] Found config state: user.{}.register=[False] (master.py:1713)
(2045) [6] [2024-04-11 13:44:12.347] [ ] Found config state: clientconfig.dhcpd.filename=['linux/pxelinux.cfg/elilo.efi'] (master.py:1713)
(2046) [5] [2024-04-11 13:44:12.347] [ ] Requesting product license... (master.py:1725)
(2047) [5] [2024-04-11 13:44:12.347] [ ] Using product property to get licensekey (master.py:1730)
(2048) [6] [2024-04-11 13:44:12.347] [ ] Product license key: (master.py:1732)
(2049) [5] [2024-04-11 13:44:12.347] [ ] Fetching pcpatch password... (master.py:1736)
(2050) [6] [2024-04-11 13:44:12.347] [ ] JSONRPC request to https://opsisrv:4447: id='d1748f63-59f2-429a-b619-fa4c9b77d7d4', method=user_getCredentials, Content-Type=application/msgpack, Content-Encoding=lz4, timeout=300.0 (opsiservice.py:1138)
(2051) [7] [2024-04-11 13:44:12.355] [ ] https://opsisrv:4447 "POST /rpc HTTP/1.1" 200 120 (connectionpool.py:547)
(2052) [6] [2024-04-11 13:44:12.355] [ ] Got response status=200, Content-Type=application/msgpack, Content-Encoding=, duration=0.008s (opsiservice.py:1160)
(2053) [6] [2024-04-11 13:44:12.355] [ ] Decrypting password... (master.py:1739)
(2054) [6] [2024-04-11 13:44:12.358] [ ] JSONRPC request to https://opsisrv:4447: id='9679b358-f433-4d09-819f-19e2f08c0e21', method=host_getObjects, Content-Type=application/msgpack, Content-Encoding=lz4, timeout=300.0 (opsiservice.py:1138)
(2055) [7] [2024-04-11 13:44:12.365] [ ] https://opsisrv:4447 "POST /rpc HTTP/1.1" 200 679 (connectionpool.py:547)
(2056) [6] [2024-04-11 13:44:12.365] [ ] Got response status=200, Content-Type=application/msgpack, Content-Encoding=, duration=0.007s (opsiservice.py:1160)
(2057) [5] [2024-04-11 13:44:12.365] [ ] depotUrl is now: smb://opsisrv/opsi_depot (master.py:1759)
(2058) [5] [2024-04-11 13:44:12.366] [ ] Connecting to depot 'smb://opsisrv/opsi_depot' (master.py:1809)
(2059) [3] [2024-04-11 13:44:13.368] [ ] list index out of range (master.py:2035)
(2060) Traceback (most recent call last):
(2061) File "opsibootimage/master.py", line 1811, in <module>
(2062) IndexError: list index out of range
(2063) [7] [2024-04-11 13:44:13.370] [ ] Backend: <opsicommon.client.opsiservice.ServiceClient object at 0x7f21d3347f90> (master.py:2037)
(2064) [7] [2024-04-11 13:44:13.371] [ ] ProductId: win11-x64 (master.py:2038)
(2065) [7] [2024-04-11 13:44:13.371] [ ] ClientId: abcd.test.local.local (master.py:2039)
(2066) [7] [2024-04-11 13:44:13.371] [ ] ProductOnClient: <ProductOnClient(clientId='abcd.test.local.local', productId='win11-x64', installationStatus='None', actionRequest='None')> (master.py:2040)
(2067) [6] [2024-04-11 13:44:13.371] [ ] Updating productOnClient: {'targetConfiguration': None, 'installationStatus': None, 'actionRequest': 'none', 'lastAction': None, 'actionProgress': '', 'actionResult': 'failed', 'productVersion': '4.2.0.6', 'packageVersion': '5', 'modificationTime': None, 'actionSequence': -1, 'productId': 'win11-x64', 'productType': 'NetbootProduct', 'clientId': 'abcd.test.local.local', 'type': 'ProductOnClient'} (master.py:2049)
(2068) [6] [2024-04-11 13:44:13.371] [ ] JSONRPC request to https://opsisrv:4447: id='70d54244-efc9-41d1-822d-4dc9ce1e857e', method=productOnClient_updateObjects, Content-Type=application/msgpack, Content-Encoding=lz4, timeout=300.0 (opsiservice.py:1138)
(2069) [7] [2024-04-11 13:44:13.494] [ ] https://opsisrv:4447 "POST /rpc HTTP/1.1" 200 62 (connectionpool.py:547)
(2070) [6] [2024-04-11 13:44:13.494] [ ] Got response status=200, Content-Type=application/msgpack, Content-Encoding=, duration=0.123s (opsiservice.py:1160)
(2071) [5] [2024-04-11 13:44:13.494] [ ] EXITING (master.py:2055)
(2072) [5] [2024-04-11 13:44:13.495] [ ] Writing log to service (master.py:2061)
(2073) [7] [2024-04-11 13:44:13.495] [ ] Removing LD_LIBRARY_PATH from env for subprocess (Posix.py:879)
(2074) [6] [2024-04-11 13:44:13.495] [ ] Executing: plymouth system-update --progress=99 (Posix.py:969)
(2075) [6] [2024-04-11 13:44:13.495] [ ] Using encoding 'utf-8' (Posix.py:996)
(2076) [7] [2024-04-11 13:44:13.512] [ ] Exit code: 0 (Posix.py:1049)
(2077) [7] [2024-04-11 13:44:13.512] [ ] Removing LD_LIBRARY_PATH from env for subprocess (Posix.py:879)
(2078) [6] [2024-04-11 13:44:13.512] [ ] Executing: plymouth display-message --text="Writing log to service" (Posix.py:969)
(2079) [6] [2024-04-11 13:44:13.513] [ ] Using encoding 'utf-8' (Posix.py:996)
(2080) [7] [2024-04-11 13:44:13.532] [ ] Exit code: 0 (Posix.py:1049)

Hi

was steht denn in den Host Parametern unter "clientconfig.depot.user"?

Der Wert wird an der fehlschlagenden Codestelle versucht auszulesen.

Gruß
Mathias