forum.opsi.org

Hallo zusammen,

beim Versuch einen Rechner mit Win11 zu installieren, läßt sich die die Platte sda nicht partitionieren. Auch ein "Wipen" der Platte hat nicht geholfen.
Ab hier gehts nicht weiter. Command '/usr/sbin/sgdisk -g --new 1::100M -t 1:ef00 -c 1:"EFI system partition" --partition-guid=C12A7328-F81F-11D2-BA4B-00A0C93EC93B -p /dev/sda' failed (4):
Could not create partition 1 from 500115456 to 204800
Hättet Ihr da eventuell einen Tipp.

(5955) [6] [2023-10-20 09:48:15.814] [ ] (logging.py:851)
(5956) [4] [2023-10-20 09:48:15.814] [ ] Warning 'unclosed file <_io.TextIOWrapper name=13 encoding='UTF-8'>' in file '/tmp/setup.py', line 1001 (logging.py:848)
(5957) [6] [2023-10-20 09:48:15.814] [ ] File "run-master", line 2028, in <module> (logging.py:851)
(5958) [6] [2023-10-20 09:48:15.814] [ ] (logging.py:851)
(5959) [6] [2023-10-20 09:48:15.814] [ ] File "/tmp/setup.py", line 1001, in <module> (logging.py:851)
(5960) [6] [2023-10-20 09:48:15.814] [ ] dummy = isRotationalDisk(disk.device) (logging.py:851)
(5961) [6] [2023-10-20 09:48:15.814] [ ] (logging.py:851)
(5962) [6] [2023-10-20 09:48:15.815] [ ] File "warnings.py", line 109, in _showwarnmsg (logging.py:851)
(5963) [6] [2023-10-20 09:48:15.815] [ ] (logging.py:851)
(5964) [6] [2023-10-20 09:48:15.815] [ ] File "opsicommon/logging/logging.py", line 849, in _log_warning (logging.py:851)
(5965) [6] [2023-10-20 09:48:15.815] [ ] (logging.py:851)
(5966) [5] [2023-10-20 09:48:15.815] [ ] Clear first 512 bytes on /dev/sda to remove grub and so on ... (setup.py:1024)
(5967) [7] [2023-10-20 09:48:15.818] [ ] Removing LD_LIBRARY_PATH from env for subprocess (Posix.py:879)
(5968) [6] [2023-10-20 09:48:15.818] [ ] Executing: /sbin/blockdev --rereadpt /dev/sda (Posix.py:969)
(5969) [6] [2023-10-20 09:48:15.819] [ ] Using encoding 'UTF-8' (Posix.py:996)
(5970) [7] [2023-10-20 09:48:15.829] [ ] Exit code: 0 (Posix.py:1049)
(5971) [5] [2023-10-20 09:48:17.833] [ ] Clear partition table of /dev/sda (setup.py:1029)
(5972) [7] [2023-10-20 09:48:18.846] [ ] Removing LD_LIBRARY_PATH from env for subprocess (Posix.py:879)
(5973) [6] [2023-10-20 09:48:18.846] [ ] Executing: /usr/sbin/sgdisk --clear -g -p /dev/sda (Posix.py:969)
(5974) [6] [2023-10-20 09:48:18.846] [ ] Using encoding 'UTF-8' (Posix.py:996)
(5975) [7] [2023-10-20 09:48:19.865] [ ] >>> Found valid GPT with corrupt MBR; using GPT and will write new (Posix.py:1042)
(5976) [7] [2023-10-20 09:48:19.865] [ ] >>> protective MBR on save. (Posix.py:1042)
(5977) [7] [2023-10-20 09:48:19.865] [ ] >>> Disk /dev/sda: 500118192 sectors, 238.5 GiB (Posix.py:1042)
(5978) [7] [2023-10-20 09:48:19.865] [ ] >>> Model: SSD_M.2_256GB_In (Posix.py:1042)
(5979) [7] [2023-10-20 09:48:19.865] [ ] >>> Sector size (logical/physical): 512/512 bytes (Posix.py:1042)
(5980) [7] [2023-10-20 09:48:19.865] [ ] >>> Disk identifier (GUID): 9EEC6BFB-937E-4754-B871-0AEC72348073 (Posix.py:1042)
(5981) [7] [2023-10-20 09:48:19.865] [ ] >>> Partition table holds up to 128 entries (Posix.py:1042)
(5982) [7] [2023-10-20 09:48:19.865] [ ] >>> Main partition table begins at sector 2 and ends at sector 33 (Posix.py:1042)
(5983) [7] [2023-10-20 09:48:19.865] [ ] >>> First usable sector is 34, last usable sector is 500118158 (Posix.py:1042)
(5984) [7] [2023-10-20 09:48:19.865] [ ] >>> Partitions will be aligned on 2048-sector boundaries (Posix.py:1042)
(5985) [7] [2023-10-20 09:48:19.865] [ ] >>> Total free space is 500118125 sectors (238.5 GiB) (Posix.py:1042)
(5986) [7] [2023-10-20 09:48:19.865] [ ] >>> (Posix.py:1042)
(5987) [7] [2023-10-20 09:48:19.865] [ ] >>> Number Start (sector) End (sector) Size Code Name (Posix.py:1042)
(5988) [7] [2023-10-20 09:48:19.865] [ ] >>> The operation has completed successfully. (Posix.py:1042)
(5989) [7] [2023-10-20 09:48:19.866] [ ] >>> (Posix.py:1042)
(5990) [7] [2023-10-20 09:48:19.866] [ ] Exit code: 0 (Posix.py:1049)
(5991) [5] [2023-10-20 09:48:19.866] [ ] Create EFI system partition on /dev/sda1 (setup.py:1033)
(5992) [7] [2023-10-20 09:48:19.866] [ ] Removing LD_LIBRARY_PATH from env for subprocess (Posix.py:879)
(5993) [6] [2023-10-20 09:48:19.866] [ ] Executing: /usr/sbin/sgdisk -g --new 1::100M -t 1:ef00 -c 1:"EFI system partition" --partition-guid=C12A7328-F81F-11D2-BA4B-00A0C93EC93B -p /dev/sda (Posix.py:969)
(5994) [6] [2023-10-20 09:48:19.866] [ ] Using encoding 'UTF-8' (Posix.py:996)
(5995) [7] [2023-10-20 09:48:19.877] [ ] >>> Setting name! (Posix.py:1042)
(5996) [7] [2023-10-20 09:48:19.877] [ ] >>> partNum is 0 (Posix.py:1042)
(5997) [7] [2023-10-20 09:48:19.877] [ ] >>> Disk /dev/sda: 500118192 sectors, 238.5 GiB (Posix.py:1042)
(5998) [7] [2023-10-20 09:48:19.877] [ ] >>> Model: SSD_M.2_256GB_In (Posix.py:1042)
(5999) [7] [2023-10-20 09:48:19.877] [ ] >>> Sector size (logical/physical): 512/512 bytes (Posix.py:1042)
(6000) [7] [2023-10-20 09:48:19.877] [ ] >>> Disk identifier (GUID): 51B9C144-95CE-4727-8F45-814C8A28DB32 (Posix.py:1042)
(6001) [7] [2023-10-20 09:48:19.877] [ ] >>> Partition table holds up to 128 entries (Posix.py:1042)
(6002) [7] [2023-10-20 09:48:19.877] [ ] >>> Main partition table begins at sector 2 and ends at sector 33 (Posix.py:1042)
(6003) [7] [2023-10-20 09:48:19.877] [ ] >>> First usable sector is 34, last usable sector is 500118158 (Posix.py:1042)
(6004) [7] [2023-10-20 09:48:19.877] [ ] >>> Partitions will be aligned on 2048-sector boundaries (Posix.py:1042)
(6005) [7] [2023-10-20 09:48:19.877] [ ] >>> Total free space is 4909 sectors (2.4 MiB) (Posix.py:1042)
(6006) [7] [2023-10-20 09:48:19.877] [ ] >>> (Posix.py:1042)
(6007) [7] [2023-10-20 09:48:19.877] [ ] >>> Number Start (sector) End (sector) Size Code Name (Posix.py:1042)
(6008) [7] [2023-10-20 09:48:19.877] [ ] >>> 1 2048 206847 100.0 MiB EF00 EFI system partition (Posix.py:1042)
(6009) [7] [2023-10-20 09:48:19.877] [ ] >>> 2 206848 239615 16.0 MiB 0C01 Microsoft reserved ... (Posix.py:1042)
(6010) [7] [2023-10-20 09:48:19.877] [ ] >>> 3 239616 499060543 237.9 GiB 0700 Basic data partition (Posix.py:1042)
(6011) [7] [2023-10-20 09:48:19.877] [ ] >>> 4 499060736 500115455 515.0 MiB 2700 (Posix.py:1042)
(6012) [7] [2023-10-20 09:48:19.878] [ ] >>> Could not create partition 1 from 500115456 to 204800 (Posix.py:1042)
(6013) [7] [2023-10-20 09:48:19.878] [ ] >>> Error encountered; not saving changes. (Posix.py:1042)
(6014) [7] [2023-10-20 09:48:19.878] [ ] >>> (Posix.py:1042)
(6015) [7] [2023-10-20 09:48:19.878] [ ] Exit code: 4 (Posix.py:1049)
(6016) [4] [2023-10-20 09:48:20.881] [ ] Warning 'OPSI.Logger.logException is deprecated, instead use logger.log with exc_info=True.' in file 'OPSI/Logger.py', line 422 (logging.py:848)
(6017) [6] [2023-10-20 09:48:20.881] [ ] File "run-master", line 2079, in <module> (logging.py:851)
(6018) [6] [2023-10-20 09:48:20.881] [ ] (logging.py:851)
(6019) [6] [2023-10-20 09:48:20.881] [ ] File "OPSI/Logger.py", line 422, in logException (logging.py:851)
(6020) [6] [2023-10-20 09:48:20.881] [ ] (logging.py:851)
(6021) [6] [2023-10-20 09:48:20.881] [ ] File "warnings.py", line 109, in _showwarnmsg (logging.py:851)
(6022) [6] [2023-10-20 09:48:20.881] [ ] (logging.py:851)
(6023) [6] [2023-10-20 09:48:20.881] [ ] File "opsicommon/logging/logging.py", line 849, in _log_warning (logging.py:851)
(6024) [6] [2023-10-20 09:48:20.881] [ ] (logging.py:851)
(6025) [2] [2023-10-20 09:48:20.881] [ ] Command '/usr/sbin/sgdisk -g --new 1::100M -t 1:ef00 -c 1:"EFI system partition" --partition-guid=C12A7328-F81F-11D2-BA4B-00A0C93EC93B -p /dev/sda' failed (4):
(6026) Setting name!
(6027) partNum is 0
(6028) Disk /dev/sda: 500118192 sectors, 238.5 GiB
(6029) Model: SSD_M.2_256GB_In
(6030) Sector size (logical/physical): 512/512 bytes
(6031) Disk identifier (GUID): 51B9C144-95CE-4727-8F45-814C8A28DB32
(6032) Partition table holds up to 128 entries
(6033) Main partition table begins at sector 2 and ends at sector 33
(6034) First usable sector is 34, last usable sector is 500118158
(6035) Partitions will be aligned on 2048-sector boundaries
(6036) Total free space is 4909 sectors (2.4 MiB)
(6037)
(6038) Number Start (sector) End (sector) Size Code Name
(6039) 1 2048 206847 100.0 MiB EF00 EFI system partition
(6040) 2 206848 239615 16.0 MiB 0C01 Microsoft reserved ...
(6041) 3 239616 499060543 237.9 GiB 0700 Basic data partition
(6042) 4 499060736 500115455 515.0 MiB 2700
(6043) Could not create partition 1 from 500115456 to 204800
(6044) Error encountered; not saving changes.
(6045) (Logger.py:423)
(6046) Traceback (most recent call last):
(6047) File "run-master", line 2028, in <module>
(6048) File "/tmp/setup.py", line 1034, in <module>
(6049) execute('/usr/sbin/sgdisk -g --new 1::100M -t 1:ef00 -c 1:\"EFI system partition\" --partition-guid=C12A7328-F81F-11D2-BA4B-00A0C93EC93B -p %s' % (disk.device))
(6050) File "OPSI/System/Posix.py", line 1057, in execute
(6051) RuntimeError: Command '/usr/sbin/sgdisk -g --new 1::100M -t 1:ef00 -c 1:"EFI system partition" --partition-guid=C12A7328-F81F-11D2-BA4B-00A0C93EC93B -p /dev/sda' failed (4):
(6052) Setting name!
(6053) partNum is 0
(6054) Disk /dev/sda: 500118192 sectors, 238.5 GiB
(6055) Model: SSD_M.2_256GB_In
(6056) Sector size (logical/physical): 512/512 bytes
(6057) Disk identifier (GUID): 51B9C144-95CE-4727-8F45-814C8A28DB32
(6058) Partition table holds up to 128 entries
(6059) Main partition table begins at sector 2 and ends at sector 33
(6060) First usable sector is 34, last usable sector is 500118158
(6061) Partitions will be aligned on 2048-sector boundaries
(6062) Total free space is 4909 sectors (2.4 MiB)
(6063)
(6064) Number Start (sector) End (sector) Size Code Name
(6065) 1 2048 206847 100.0 MiB EF00 EFI system partition
(6066) 2 206848 239615 16.0 MiB 0C01 Microsoft reserved ...
(6067) 3 239616 499060543 237.9 GiB 0700 Basic data partition
(6068) 4 499060736 500115455 515.0 MiB 2700
(6069) Could not create partition 1 from 500115456 to 204800
(6070) Error encountered; not saving changes.
(6071)
(6072) [7] [2023-10-20 09:48:20.882] [ ] Backend: <JSONRPCBackend()> (run-master:2081)
(6073) [7] [2023-10-20 09:48:20.882] [ ] ProductId: win11-x64 (run-master:2082)
(6074) [7] [2023-10-20 09:48:20.882] [ ] ClientId: win11-test-pc.xxxxxxl (run-master:2083)
(6075) [7] [2023-10-20 09:48:20.882] [ ] ProductOnClient: <ProductOnClient(clientId='win11-test-pc.xxxx.local', productId='win11-x64', installationStatus='unknown', actionRequest='none')> (run-master:2084)
(6076) [6] [2023-10-20 09:48:20.882] [ ] Updating productOnClient: {'targetConfiguration': None, 'installationStatus': 'unknown', 'actionRequest': 'none', 'lastAction': None, 'actionProgress': '', 'actionResult': 'failed', 'productVersion': None, 'packageVersion': None, 'modificationTime': None, 'actionSequence': None, 'productId': 'win11-x64', 'productType': 'NetbootProduct', 'clientId': 'win11-test-pc.xxxx', 'type': 'ProductOnClient'} (run-master:2095)
(6077) [6] [2023-10-20 09:48:20.882] [ ] JSONRPC request to https://172.x.x.x:4447/rpc: ip_version=4, id=22, method=productOnClient_updateObjects, Content-Type=application/msgpack, Content-Encoding=lz4, timeout=(10, 300) (jsonrpc.py:451)
(6078) [7] [2023-10-20 09:48:20.882] [ ] Resetting dropped connection: 172.x.x.x (connectionpool.py:273)
(6079) [7] [2023-10-20 09:48:20.883] [ ] Using ip version 4 (jsonrpc.py:94)
(6080) [7] [2023-10-20 09:48:20.917] [ ] https://172.x.x.x:4447 "POST /rpc HTTP/1.1" 200 25 (connectionpool.py:456)
(6081) [6] [2023-10-20 09:48:20.917] [ ] Got response status=200, Content-Type=application/msgpack, Content-Encoding=, duration=0.036s (jsonrpc.py:476)
(6082) [5] [2023-10-20 09:48:20.918] [ ] EXITING (run-master:2101)
(6083) [5] [2023-10-20 09:48:20.918] [ ] Writing log to service (run-master:2107)

LG
Das Tier-Admin

hi

was mich wundert:

erst wird im Log gesagt die Platte wäre leer, dann nur noch wenige MB frei und dann wird versucht eine EFI Partition anzulegen, obwohl diese schon da sei. alles ziemlich wirr

ruf mal im Bootimage auf

Damit sollten alle Partitionen weg sein und probiere es dann nochmal auf.

Gegegebenenfalls das Bootimage und Netboot paket aktualisieren.

Gruß
Mathias

Hallo Mathias,

Danke für die schnelle Rückmeldung. Ich versuche Deine Anleitung heute noch auszuprobieren und teile das Ergebnis mit.

......
Habs nach Deiner Anleitung versucht. Ich versuche es mal mit einer Gparted Live CD, mal gucken ob ich die Partitionen von der Platte bekomme.
Nach dem Ausführen der Befehle
sgdisk --zap-all /dev/sda blieben die Partitionen erhalten.
auch das ausführen von sgadisk --zap /dev/sda1 bis sda4 schafft keine Abhilfe. Da stand zwar daß die GPT zerstört wurde
, aber nach einen sgdisk --print wurden die Partitionen noch angezeigt.

.....
Nach einem Wechsel von der M.2 Platte auf eine SSD 2.5 Zoll geht es weiter.
(6095) [4] [2023-10-20 16:18:12.402] [ ] Warning 'unclosed file <_io.TextIOWrapper name=13 encoding='UTF-8'>' in file '/tmp/setup.py', line 1386 (logging.py:848)
(6096) [6] [2023-10-20 16:18:12.402] [ ] File "run-master", line 2028, in <module> (logging.py:851)
(6097) [6] [2023-10-20 16:18:12.402] [ ] (logging.py:851)
(6098) [6] [2023-10-20 16:18:12.402] [ ] File "/tmp/setup.py", line 1386, in <module> (logging.py:851)
(6099) [6] [2023-10-20 16:18:12.402] [ ] if isRaidMember(aktdisk.device): (logging.py:851)
(6100) [6] [2023-10-20 16:18:12.402] [ ] (logging.py:851)
(6101) [6] [2023-10-20 16:18:12.402] [ ] File "warnings.py", line 109, in _showwarnmsg (logging.py:851)
(6102) [6] [2023-10-20 16:18:12.402] [ ] (logging.py:851)
(6103) [6] [2023-10-20 16:18:12.402] [ ] File "opsicommon/logging/logging.py", line 849, in _log_warning (logging.py:851)
(6104) [6] [2023-10-20 16:18:12.402] [ ] (logging.py:851)
(6105) [5] [2023-10-20 16:18:12.402] [ ] Check if disk /dev/sda is raid HD (<string>:97)
(6106) [5] [2023-10-20 16:18:12.402] [ ] Disk /dev/sda is no (Soft/Fake) Raid (<string>:123)
(6107) [7] [2023-10-20 16:18:12.403] [ ] Removing LD_LIBRARY_PATH from env for subprocess (Posix.py:879)
(6108) [6] [2023-10-20 16:18:12.403] [ ] Executing: sfdisk -l /dev/sda (Posix.py:969)
(6109) [6] [2023-10-20 16:18:12.403] [ ] Using encoding 'UTF-8' (Posix.py:996)
(6110) [7] [2023-10-20 16:18:12.412] [ ] >>> Disk /dev/sda: 111,79 GiB, 120034123776 bytes, 234441648 sectors (Posix.py:1042)
(6111) [7] [2023-10-20 16:18:12.412] [ ] >>> Disk model: Intenso SSD (Posix.py:1042)
(6112) [7] [2023-10-20 16:18:12.412] [ ] >>> Units: sectors of 1 * 512 = 512 bytes (Posix.py:1042)
(6113) [7] [2023-10-20 16:18:12.412] [ ] >>> Sector size (logical/physical): 512 bytes / 512 bytes (Posix.py:1042)
(6114) [7] [2023-10-20 16:18:12.413] [ ] >>> I/O size (minimum/optimal): 512 bytes / 512 bytes (Posix.py:1042)
(6115) [7] [2023-10-20 16:18:12.413] [ ] >>> Disklabel type: gpt (Posix.py:1042)
(6116) [7] [2023-10-20 16:18:12.413] [ ] >>> Disk identifier: 99A60749-847A-4800-9CF5-A0FB16A90DBE (Posix.py:1042)
(6117) [7] [2023-10-20 16:18:12.413] [ ] >>> (Posix.py:1042)
(6118) [7] [2023-10-20 16:18:12.413] [ ] >>> Device Start End Sectors Size Type (Posix.py:1042)
(6119) [7] [2023-10-20 16:18:12.413] [ ] >>> /dev/sda1 2048 204800 202753 99M EFI System (Posix.py:1042)
(6120) [7] [2023-10-20 16:18:12.413] [ ] >>> /dev/sda2 206848 468991 262144 128M Microsoft reserved (Posix.py:1042)
(6121) [7] [2023-10-20 16:18:12.413] [ ] >>> /dev/sda3 468992 224669695 224200704 106,9G Microsoft basic data (Posix.py:1042)
(6122) [7] [2023-10-20 16:18:12.413] [ ] >>> /dev/sda4 224669696 232861695 8192000 3,9G Microsoft basic data (Posix.py:1042)
(6123) [7] [2023-10-20 16:18:12.413] [ ] >>> (Posix.py:1042)
(6124) [7] [2023-10-20 16:18:12.413] [ ] Exit code: 0 (Posix.py:1049)
(6125) [5] [2023-10-20 16:18:12.413] [ ] has disk /dev/sda a gpt partition table ? (setup.py:1395)
(6126) [5] [2023-10-20 16:18:12.425] [ ] disk /dev/sda have a gpt partition table: (setup.py:1402)
(6127) [7] [2023-10-20 16:18:12.425] [ ] Removing LD_LIBRARY_PATH from env for subprocess (Posix.py:879)
(6128) [6] [2023-10-20 16:18:12.425] [ ] Executing: sgdisk -p /dev/sda (Posix.py:969)
(6129) [6] [2023-10-20 16:18:12.426] [ ] Using encoding 'UTF-8' (Posix.py:996)
(6130) [7] [2023-10-20 16:18:12.436] [ ] >>> Disk /dev/sda: 234441648 sectors, 111.8 GiB (Posix.py:1042)
(6131) [7] [2023-10-20 16:18:12.436] [ ] >>> Model: Intenso SSD (Posix.py:1042)
(6132) [7] [2023-10-20 16:18:12.436] [ ] >>> Sector size (logical/physical): 512/512 bytes (Posix.py:1042)
(6133) [7] [2023-10-20 16:18:12.436] [ ] >>> Disk identifier (GUID): 99A60749-847A-4800-9CF5-A0FB16A90DBE (Posix.py:1042)
(6134) [7] [2023-10-20 16:18:12.437] [ ] >>> Partition table holds up to 128 entries (Posix.py:1042)
(6135) [7] [2023-10-20 16:18:12.437] [ ] >>> Main partition table begins at sector 2 and ends at sector 33 (Posix.py:1042)
(6136) [7] [2023-10-20 16:18:12.437] [ ] >>> First usable sector is 34, last usable sector is 234441614 (Posix.py:1042)
(6137) [7] [2023-10-20 16:18:12.437] [ ] >>> Partitions will be aligned on 2048-sector boundaries (Posix.py:1042)
(6138) [7] [2023-10-20 16:18:12.437] [ ] >>> Total free space is 1583980 sectors (773.4 MiB) (Posix.py:1042)
(6139) [7] [2023-10-20 16:18:12.437] [ ] >>> (Posix.py:1042)
(6140) [7] [2023-10-20 16:18:12.437] [ ] >>> Number Start (sector) End (sector) Size Code Name (Posix.py:1042)
(6141) [7] [2023-10-20 16:18:12.437] [ ] >>> 1 2048 204800 99.0 MiB EF00 EFI system partition (Posix.py:1042)
(6142) [7] [2023-10-20 16:18:12.437] [ ] >>> 2 206848 468991 128.0 MiB 0C01 MS reserved (Posix.py:1042)
(6143) [7] [2023-10-20 16:18:12.437] [ ] >>> 3 468992 224669695 106.9 GiB 0700 WINDOWS (Posix.py:1042)
(6144) [7] [2023-10-20 16:18:12.437] [ ] >>> 4 224669696 232861695 3.9 GiB 0700 WINPE (Posix.py:1042)
(6145) [7] [2023-10-20 16:18:12.437] [ ] >>> (Posix.py:1042)

LG
Jürgen

Moin Mathias,
habe win11 -UEFI- Secureboot auf der Kiste mit einem I3-9100 nach dem Plattenaustausch auf 2,5" SSD doch installiert bekommen. Das Verhalten mit der M.2 Disk, muß ich mir bei dem nächsten Installationsversuch nochmals anschauen.
Vielen Dank für die Unterstützung und schnellen Rückmeldungen.

VLG
Jürgen.