Win11 Installation schlägt fehlt

[Seelenschnitter]

Hallo zusammen,

ich muss nun kapitulieren. Ich habe einen identischen PC der denselben Prozessor, Festplatte, Grafikkarte, Mainboard, Bios Einstellungen etc und alles gleich im OPSI eingestellt hat (inklusive der AMD Parameter in der opsi-linux-bootimage.append mit mem=2G nomodeset und ramdisk_size=2097152) versucht zu installieren aber was auch immer ich versuche, er scheitert an:

Code: Alles auswählen

(9566)    [2] [2023-04-30 01:43:07.839] [               ] local variable 'labelID' referenced before assignment   (Logger.py:423)
(9567)    Traceback (most recent call last):
(9568)      File "run-master", line 2018, in <module>
(9569)      File "/tmp/setup.py", line 1830, in <module>
(9570)        setFirstUefiBoot('opsitempwinpe')
(9571)      File "<string>", line 632, in setFirstUefiBoot
(9572)    UnboundLocalError: local variable 'labelID' referenced before assignment

Nachtrag: Wenn ich im opsi configed während er den Pxe Boot auf "neu laden" gehe, sagt er auch:
failed: pxe boot configuration read ( ) failed

Danach zeigt er dann am Client local variable 'labelID' referenced before assignment an

Vielleicht kann ja jemand helfen. Ich brauch nach über 16 Stunden vor Ort langsam mein Bett.

Danke schonmal

[m.radtke]

Hallo,

könntest du bitte das komplette Log per Pastebin oder öhnlichem Dienst zur Verfügung stellen?
Ich habe eine Vermutung.

Gruß
Mathias

[ThomasT]

Hast du das aktuelle win11-x64 Pakete (4.2.0.3-6) genutzt?

[Seelenschnitter]

Hi. Sorry hat etwas gedauert, bis ich wieder vor Ort bin.

Ja ist das aktuellste Paket.

Hier die Logs:

Code: Alles auswählen

(0)       May 12 18:21:32 [opsiinit] opsi init script started
(1)       May 12 18:21:32 [opsiinit] opsi linux bootimage version: 20230328 (4.2)
(2)       May 12 18:21:32 [opsiinit] getBootParam(easypass): cmdline: rootfstype=ramfs BOOT_IMAGE=(pxe)/linux/install-x64 initrd=miniroot-x64 video=vesa:ywrap,mtrr vga=791 quiet splash --no-log console=tty1 console=ttyS0 pckey=*** confidential *** hn=gaming3 dn=wesports.niederkruechten product=win11-x64 macaddress=d8:bb:c1:0d:50:b0 service=https://10.10.10.252:4447/rpc mem=2G nomodeset ramdisk_size=2097152
(3)       May 12 18:21:32 [opsiinit] boot param easypass found
(4)       May 12 18:21:32 [opsiinit] getBootParam(pwh): cmdline: rootfstype=ramfs BOOT_IMAGE=(pxe)/linux/install-x64 initrd=miniroot-x64 video=vesa:ywrap,mtrr vga=791 quiet splash --no-log console=tty1 console=ttyS0 pckey=*** confidential *** hn=gaming3 dn=wesports.niederkruechten product=win11-x64 macaddress=d8:bb:c1:0d:50:b0 service=https://10.10.10.252:4447/rpc mem=2G nomodeset ramdisk_size=2097152
(5)       May 12 18:21:32 [opsiinit] boot param pwh=
(6)       May 12 18:21:32 [opsiinit] getBootParam(nodhcp): cmdline: rootfstype=ramfs BOOT_IMAGE=(pxe)/linux/install-x64 initrd=miniroot-x64 video=vesa:ywrap,mtrr vga=791 quiet splash --no-log console=tty1 console=ttyS0 pckey=*** confidential *** hn=gaming3 dn=wesports.niederkruechten product=win11-x64 macaddress=d8:bb:c1:0d:50:b0 service=https://10.10.10.252:4447/rpc mem=2G nomodeset ramdisk_size=2097152
(7)       May 12 18:21:32 [opsiinit] boot param nodhcp=0
(8)       May 12 18:21:32 [opsiinit] getBootParam(hn): cmdline: rootfstype=ramfs BOOT_IMAGE=(pxe)/linux/install-x64 initrd=miniroot-x64 video=vesa:ywrap,mtrr vga=791 quiet splash --no-log console=tty1 console=ttyS0 pckey=*** confidential *** hn=gaming3 dn=wesports.niederkruechten product=win11-x64 macaddress=d8:bb:c1:0d:50:b0 service=https://10.10.10.252:4447/rpc mem=2G nomodeset ramdisk_size=2097152
(9)       May 12 18:21:32 [opsiinit] boot param hn=gaming3
(10)      May 12 18:21:32 [opsiinit] getBootParam(dhclienttimeout): cmdline: rootfstype=ramfs BOOT_IMAGE=(pxe)/linux/install-x64 initrd=miniroot-x64 video=vesa:ywrap,mtrr vga=791 quiet splash --no-log console=tty1 console=ttyS0 pckey=*** confidential *** hn=gaming3 dn=wesports.niederkruechten product=win11-x64 macaddress=d8:bb:c1:0d:50:b0 service=https://10.10.10.252:4447/rpc mem=2G nomodeset ramdisk_size=2097152
(11)      May 12 18:21:32 [opsiinit] getBootParam(lang): cmdline: rootfstype=ramfs BOOT_IMAGE=(pxe)/linux/install-x64 initrd=miniroot-x64 video=vesa:ywrap,mtrr vga=791 quiet splash --no-log console=tty1 console=ttyS0 pckey=*** confidential *** hn=gaming3 dn=wesports.niederkruechten product=win11-x64 macaddress=d8:bb:c1:0d:50:b0 service=https://10.10.10.252:4447/rpc mem=2G nomodeset ramdisk_size=2097152
(12)      May 12 18:21:32 [opsiinit] boot param lang=
(13)      May 12 18:21:32 [opsiinit] unlinking resolv.conf from stub systemd resolver
(14)      May 12 18:21:32 [opsiinit] loading keymap de-latin1-nodeadkeys
(15)      May 12 18:21:32 [opsiinit] setting language environment (LANG=de_DE.UTF8, LANGUAGE=de, LC_ALL=de_DE.UTF8)
(16)      May 12 18:21:32 [opsiinit] getNetworkDevices(): link forced
(17)      May 12 18:21:32 [opsiinit] getNetworkDevices(): device(s) found:  enp34s0, device(s) with link: 
(18)      May 12 18:21:32 [opsiinit] getNetworkDevices(): no devices with link found and link forced, returning error
(19)      May 12 18:21:32 [opsiinit] no devices found, sleeping 3 seconds
(20)      May 12 18:21:35 [opsiinit] getNetworkDevices(): link forced
(21)      May 12 18:21:35 [opsiinit] getNetworkDevices(): device(s) found:  enp34s0, device(s) with link:  enp34s0
(22)      May 12 18:21:35 [opsiinit] getNetworkDevices(): device(s) with link found, returning  enp34s0
(23)      May 12 18:21:35 [opsiinit] device(s) found: enp34s0
(24)      May 12 18:21:35 [opsiinit] getBootParam(macaddress): cmdline: rootfstype=ramfs BOOT_IMAGE=(pxe)/linux/install-x64 initrd=miniroot-x64 video=vesa:ywrap,mtrr vga=791 quiet splash --no-log console=tty1 console=ttyS0 pckey=*** confidential *** hn=gaming3 dn=wesports.niederkruechten product=win11-x64 macaddress=d8:bb:c1:0d:50:b0 service=https://10.10.10.252:4447/rpc mem=2G nomodeset ramdisk_size=2097152
(25)      May 12 18:21:35 [opsiinit] macaddress Parameter found
(26)      May 12 18:21:35 [opsiinit] getNetworkDevices(): device(s) found:  enp34s0, device(s) with link:  enp34s0
(27)      May 12 18:21:35 [opsiinit] getNetworkDevices(): device(s) with link found, returning  enp34s0
(28)      May 12 18:21:35 [opsiinit] using dhcp, adding entry for device enp34s0 to /etc/netplan/01-enp34s0.yaml
(29)      May 12 18:21:46 [opsiinit] Setting hostname to gaming3 as supplied by cmdline
(30)      May 12 18:21:46 [opsiinit] opsi init script ended
(31)      [4] [2023-05-12 18:21:51.799] [               ] Warning 'OPSI.Logger.setLogFormat is deprecated, use opsicommon.logging.set_format instead.' in file 'OPSI/Logger.py', line 201   (logging.py:848)
(41)      [5] [2023-05-12 18:21:51.799] [               ] Master version 0.1.0 [python-opsi=4.2.0.326]   (run-master:801)
(51)      [5] [2023-05-12 18:21:51.817] [               ] UI INITIALIZED   (run-master:813)
(52)      [5] [2023-05-12 18:21:51.817] [               ] type of ui after initializing with UIFactory   (run-master:814)
(53)      [5] [2023-05-12 18:21:51.817] [               ] <class 'OPSI.UI.SnackUI'>   (run-master:815)
(54)      [4] [2023-05-12 18:21:51.817] [               ] Warning 'OPSI.Logger.addConfidentialString is deprecated, use secret_filter.add_secrets instead.' in file 'OPSI/Logger.py', line 191   (logging.py:848)
(1120)    [5] [2023-05-12 18:21:51.909] [               ] Detected link on device 'enp34s0'   (run-master:872)
(1121)    [5] [2023-05-12 18:21:51.909] [               ] No file dhclient.enp34s0.leases found   (run-master:892)
(1122)    [5] [2023-05-12 18:21:51.909] [               ] Waiting for network devices to get configured by dhcp   (run-master:941)
(1130)    [5] [2023-05-12 18:21:51.916] [               ] device enp34s0 vendor ID is 10EC   (Posix.py:503)
(1131)    [5] [2023-05-12 18:21:51.916] [               ] device enp34s0 device ID is 8168   (Posix.py:522)
(1132)    [5] [2023-05-12 18:21:51.916] [               ] All network devices configured   (run-master:954)
(1133)    [5] [2023-05-12 18:21:51.916] [               ] leases: enp34s0:/var/lib/dhcp/dhclient.leases   (run-master:983)
(1134)    [5] [2023-05-12 18:21:51.916] [               ] Getting dhcp result for device: enp34s0   (run-master:987)
(1163)    [5] [2023-05-12 18:21:51.924] [               ] device enp34s0 vendor ID is 10EC   (Posix.py:503)
(1164)    [5] [2023-05-12 18:21:51.924] [               ] device enp34s0 device ID is 8168   (Posix.py:522)
(1175)    [5] [2023-05-12 18:21:51.925] [               ] checking if /sys/firmware/efi exists   (run-master:731)
(1180)    [5] [2023-05-12 18:21:51.932] [               ] check if we run in uefi mode   (run-master:737)
(1181)    [5] [2023-05-12 18:21:51.972] [               ] we are running in uefi mode   (run-master:741)
(1182)    [5] [2023-05-12 18:21:52.052] [               ] CurrentBoot could not be read.   (run-master:612)
(1191)    [5] [2023-05-12 18:21:52.060] [               ] device enp34s0 vendor ID is 10EC   (Posix.py:503)
(1192)    [5] [2023-05-12 18:21:52.060] [               ] device enp34s0 device ID is 8168   (Posix.py:522)
(1201)    [5] [2023-05-12 18:21:52.068] [               ] device enp34s0 vendor ID is 10EC   (Posix.py:503)
(1202)    [5] [2023-05-12 18:21:52.068] [               ] device enp34s0 device ID is 8168   (Posix.py:522)
(1688)    [5] [2023-05-12 18:21:52.249] [               ] Product-id is 'win11-x64'   (run-master:1700)
(1695)    [5] [2023-05-12 18:21:52.332] [               ] Fetching product properties...   (run-master:1735)
(1736)    [5] [2023-05-12 18:21:52.481] [               ] Fetching config states...   (run-master:1748)
(1816)    [5] [2023-05-12 18:21:52.550] [               ] Requesting product license...   (run-master:1758)
(1817)    [5] [2023-05-12 18:21:52.550] [               ] Using product property to get licensekey   (run-master:1765)
(1819)    [5] [2023-05-12 18:21:52.550] [               ] Fetching pcpatch password...   (run-master:1773)
(1824)    [4] [2023-05-12 18:21:52.593] [               ] Warning 'OPSI.Logger.addConfidentialString is deprecated, use secret_filter.add_secrets instead.' in file 'OPSI/Logger.py', line 191   (logging.py:848)
(1836)    [5] [2023-05-12 18:21:52.630] [               ] Connecting to depot 'smb://10.10.10.252/opsi_depot'   (run-master:1850)
(1844)    [5] [2023-05-12 18:21:52.728] [               ] checking if /sys/firmware/efi exists   (run-master:731)
(1849)    [5] [2023-05-12 18:21:52.736] [               ] check if we run in uefi mode   (run-master:737)
(1850)    [5] [2023-05-12 18:21:52.776] [               ] we are running in uefi mode   (run-master:741)
(1851)    [5] [2023-05-12 18:21:52.776] [               ] checking if /sys/firmware/efi exists   (run-master:731)
(1856)    [5] [2023-05-12 18:21:52.784] [               ] check if we run in uefi mode   (run-master:737)
(1857)    [5] [2023-05-12 18:21:52.824] [               ] we are running in uefi mode   (run-master:741)
(1858)    [5] [2023-05-12 18:21:52.848] [               ] mokutil output: SecureBoot enabled
(1859)       (run-master:759)
(1860)    [5] [2023-05-12 18:21:52.848] [               ] We are running in SecureBoot mode   (run-master:761)
(1864)    [5] [2023-05-12 18:21:53.762] [               ] found valid uefi license in modules   (run-master:1898)
(1865)    [5] [2023-05-12 18:21:53.762] [               ] found valid secureboot license in modules   (run-master:1903)
(1866)    [5] [2023-05-12 18:21:53.762] [               ] Copying action script 'win11-x64/setup.py' from depot to '/tmp/setup.py'   (run-master:1944)
(1883)    [4] [2023-05-12 18:21:53.868] [               ] Warning 'unclosed file <_io.BufferedReader name='/tmp/setup.py'>' in file 'run-master', line 2018   (logging.py:848)
(1890)    [4] [2023-05-12 18:21:53.873] [               ] Warning 'invalid escape sequence '\.'' in file '/tmp/setup.py', line 1553   (logging.py:848)
(1897)    [4] [2023-05-12 18:21:53.873] [               ] Warning 'invalid escape sequence '\W'' in file '/tmp/setup.py', line 1587   (logging.py:848)
(1919)    [4] [2023-05-12 18:21:53.940] [               ] Warning 'unclosed file <_io.TextIOWrapper name='/tmp/opsisetuplib.py' mode='r' encoding='UTF-8'>' in file '/tmp/setup.py', line 49   (logging.py:848)
(1929)    [4] [2023-05-12 18:21:53.941] [               ] Warning 'invalid escape sequence '\d'' in file '<string>', line 199   (logging.py:848)
(1939)    [4] [2023-05-12 18:21:53.941] [               ] Warning 'invalid escape sequence '\d'' in file '<string>', line 201   (logging.py:848)
(1949)    [4] [2023-05-12 18:21:53.941] [               ] Warning 'invalid escape sequence '\d'' in file '<string>', line 203   (logging.py:848)
(1959)    [4] [2023-05-12 18:21:53.941] [               ] Warning 'invalid escape sequence '\d'' in file '<string>', line 204   (logging.py:848)
(1969)    [4] [2023-05-12 18:21:53.942] [               ] Warning 'invalid escape sequence '\s'' in file '<string>', line 519   (logging.py:848)
(1979)    [4] [2023-05-12 18:21:53.943] [               ] Warning 'invalid escape sequence '\s'' in file '<string>', line 520   (logging.py:848)
(1989)    [4] [2023-05-12 18:21:53.943] [               ] Warning 'invalid escape sequence '\d'' in file '<string>', line 574   (logging.py:848)
(1999)    [4] [2023-05-12 18:21:53.943] [               ] Warning 'invalid escape sequence '\s'' in file '<string>', line 605   (logging.py:848)
(2009)    [4] [2023-05-12 18:21:53.944] [               ] Warning 'invalid escape sequence '\d'' in file '<string>', line 625   (logging.py:848)
(2019)    [4] [2023-05-12 18:21:53.944] [               ] Warning 'invalid escape sequence '\s'' in file '<string>', line 672   (logging.py:848)
(2029)    [4] [2023-05-12 18:21:53.944] [               ] Warning 'invalid escape sequence '\w'' in file '<string>', line 687   (logging.py:848)
(2039)    [4] [2023-05-12 18:21:53.945] [               ] Warning 'invalid escape sequence '\d'' in file '<string>', line 701   (logging.py:848)
(2049)    [4] [2023-05-12 18:21:53.945] [               ] Warning 'invalid escape sequence '\d'' in file '<string>', line 769   (logging.py:848)
(2059)    [5] [2023-05-12 18:21:53.948] [               ] ##############################################################   (setup.py:51)
(2060)    [5] [2023-05-12 18:21:53.948] [               ] initOpsiSetupLib()   (<string>:20)
(2061)    [5] [2023-05-12 18:21:53.948] [               ] OpsiSetupLib $Revision$   (<string>:21)
(2062)    [5] [2023-05-12 18:21:53.948] [               ] OpsiSetupLib $Date$   (<string>:22)
(2063)    [5] [2023-05-12 18:21:53.948] [               ] nt6.py   (setup.py:53)
(2064)    [5] [2023-05-12 18:21:53.948] [               ] ##############################################################   (setup.py:55)
(2065)    [5] [2023-05-12 18:21:53.948] [               ] Installing Product: win11-x64_4.2.0.3-6 on gaming3.wesports.niederkruechten   (setup.py:64)
(2066)    [5] [2023-05-12 18:21:53.948] [               ] ##############################################################   (setup.py:67)
(2070)    [5] [2023-05-12 18:21:54.016] [               ] Installed opsi-script version: 4.12.9.1    (setup.py:85)
(2072)    [5] [2023-05-12 18:21:54.016] [               ] Checking if /sys/firmware/efi exists   (<string>:548)
(2077)    [5] [2023-05-12 18:21:54.022] [               ] check if we run in uefi mode   (<string>:555)
(2078)    [5] [2023-05-12 18:21:54.062] [               ] we are running in uefi mode   (<string>:560)
(2079)    [5] [2023-05-12 18:21:54.062] [               ] checking if /sys/firmware/efi exists   (run-master:731)
(2084)    [5] [2023-05-12 18:21:54.070] [               ] check if we run in uefi mode   (run-master:737)
(2085)    [5] [2023-05-12 18:21:54.110] [               ] we are running in uefi mode   (run-master:741)
(2086)    [5] [2023-05-12 18:21:54.132] [               ] mokutil output: SecureBoot enabled
(2087)       (run-master:759)
(2088)    [5] [2023-05-12 18:21:54.132] [               ] We are running in SecureBoot mode   (run-master:761)
(2089)    [5] [2023-05-12 18:21:54.132] [               ] we are running in Secure Boot mode   (setup.py:106)
(2090)    [5] [2023-05-12 18:21:54.132] [               ] We install to disk   (setup.py:129)
(2091)    [5] [2023-05-12 18:21:54.133] [               ] useRaid1 is False   (setup.py:269)
(2092)    [5] [2023-05-12 18:21:54.133] [               ] preserve_winpe_partition is False   (setup.py:274)
(2093)    [5] [2023-05-12 18:21:54.133] [               ] preserve_winpe_partition is False   (setup.py:278)
(2094)    [5] [2023-05-12 18:21:54.133] [               ] Using installfiles_dir: installfiles   (setup.py:288)
(2095)    [5] [2023-05-12 18:21:54.133] [               ] winpe_debug_cmd_exe = False   (setup.py:312)
(2096)    [5] [2023-05-12 18:21:54.133] [               ] Determine if we have to localize the administrator   (setup.py:365)
(2106)    [5] [2023-05-12 18:21:54.172] [               ] peres found - we use peres -v to get setup.exe fileversion   (setup.py:378)
(2173)    [5] [2023-05-12 18:21:54.180] [               ] winver is 10   (setup.py:412)
(2174)    [5] [2023-05-12 18:21:54.180] [               ] we localize because winver 10 is >= 10   (setup.py:415)
(2175)    [5] [2023-05-12 18:21:54.180] [               ] We use as administrator: Administrator   (setup.py:439)
(2176)    [5] [2023-05-12 18:21:54.192] [               ] Partition numbers are now: , boot=0, system=3, winpe=4, data=0   (setup.py:491)
(2177)    [5] [2023-05-12 18:21:54.192] [               ] Fetching opsi hw audit configuration   (setup.py:565)
(2181)    [5] [2023-05-12 18:21:54.232] [               ] Running hardware inventory   (setup.py:568)
(2183)    [4] [2023-05-12 18:21:54.234] [               ] Warning 'Parameter env invalid' in file 'OPSI/System/Posix.py', line 857   (logging.py:848)
(4506)    [3] [2023-05-12 18:21:54.575] [               ] Command 'lsusb' not found in PATH   (Posix.py:3390)
(5271)    [4] [2023-05-12 18:21:54.600] [               ] Attribute part 'id' not found   (Posix.py:3555)
(5281)    [4] [2023-05-12 18:21:54.602] [               ] Attribute part 'product' not found   (Posix.py:3555)
(5282)    [4] [2023-05-12 18:21:54.602] [               ] Attribute part 'serial' not found   (Posix.py:3555)
(5348)    [4] [2023-05-12 18:21:54.606] [               ] Attribute part 'serial' not found   (Posix.py:3555)
(5350)    [4] [2023-05-12 18:21:54.606] [               ] Attribute part 'serial' not found   (Posix.py:3555)
(5353)    [4] [2023-05-12 18:21:54.607] [               ] Attribute part 'serial' not found   (Posix.py:3555)
(5355)    [4] [2023-05-12 18:21:54.607] [               ] Attribute part 'serial' not found   (Posix.py:3555)
(5357)    [4] [2023-05-12 18:21:54.607] [               ] Attribute part 'serial' not found   (Posix.py:3555)
(5359)    [4] [2023-05-12 18:21:54.608] [               ] Attribute part 'serial' not found   (Posix.py:3555)
(5361)    [4] [2023-05-12 18:21:54.608] [               ] Attribute part 'serial' not found   (Posix.py:3555)
(5363)    [4] [2023-05-12 18:21:54.608] [               ] Attribute part 'serial' not found   (Posix.py:3555)
(5366)    [4] [2023-05-12 18:21:54.609] [               ] Attribute part 'serial' not found   (Posix.py:3555)
(5368)    [4] [2023-05-12 18:21:54.609] [               ] Attribute part 'serial' not found   (Posix.py:3555)
(5370)    [4] [2023-05-12 18:21:54.609] [               ] Attribute part 'serial' not found   (Posix.py:3555)
(5372)    [4] [2023-05-12 18:21:54.609] [               ] Attribute part 'serial' not found   (Posix.py:3555)
(5374)    [4] [2023-05-12 18:21:54.610] [               ] Attribute part 'serial' not found   (Posix.py:3555)
(5376)    [4] [2023-05-12 18:21:54.610] [               ] Attribute part 'serial' not found   (Posix.py:3555)
(5378)    [4] [2023-05-12 18:21:54.610] [               ] Attribute part 'serial' not found   (Posix.py:3555)
(5380)    [4] [2023-05-12 18:21:54.610] [               ] Attribute part 'serial' not found   (Posix.py:3555)
(5382)    [4] [2023-05-12 18:21:54.611] [               ] Attribute part 'serial' not found   (Posix.py:3555)
(5384)    [4] [2023-05-12 18:21:54.611] [               ] Attribute part 'serial' not found   (Posix.py:3555)
(5386)    [4] [2023-05-12 18:21:54.611] [               ] Attribute part 'serial' not found   (Posix.py:3555)
(5388)    [4] [2023-05-12 18:21:54.611] [               ] Attribute part 'serial' not found   (Posix.py:3555)
(5390)    [4] [2023-05-12 18:21:54.612] [               ] Attribute part 'serial' not found   (Posix.py:3555)
(5392)    [4] [2023-05-12 18:21:54.612] [               ] Attribute part 'serial' not found   (Posix.py:3555)
(5394)    [4] [2023-05-12 18:21:54.612] [               ] Attribute part 'serial' not found   (Posix.py:3555)
(5396)    [4] [2023-05-12 18:21:54.612] [               ] Attribute part 'serial' not found   (Posix.py:3555)
(5398)    [4] [2023-05-12 18:21:54.612] [               ] Attribute part 'serial' not found   (Posix.py:3555)
(5400)    [4] [2023-05-12 18:21:54.613] [               ] Attribute part 'serial' not found   (Posix.py:3555)
(5402)    [4] [2023-05-12 18:21:54.613] [               ] Attribute part 'serial' not found   (Posix.py:3555)
(5404)    [4] [2023-05-12 18:21:54.613] [               ] Attribute part 'serial' not found   (Posix.py:3555)
(5406)    [4] [2023-05-12 18:21:54.613] [               ] Attribute part 'serial' not found   (Posix.py:3555)
(5408)    [4] [2023-05-12 18:21:54.613] [               ] Attribute part 'serial' not found   (Posix.py:3555)
(5410)    [4] [2023-05-12 18:21:54.614] [               ] Attribute part 'serial' not found   (Posix.py:3555)
(5412)    [4] [2023-05-12 18:21:54.614] [               ] Attribute part 'serial' not found   (Posix.py:3555)
(5414)    [4] [2023-05-12 18:21:54.614] [               ] Attribute part 'serial' not found   (Posix.py:3555)
(5416)    [4] [2023-05-12 18:21:54.614] [               ] Attribute part 'serial' not found   (Posix.py:3555)
(5418)    [4] [2023-05-12 18:21:54.614] [               ] Attribute part 'serial' not found   (Posix.py:3555)
(5420)    [4] [2023-05-12 18:21:54.614] [               ] Attribute part 'serial' not found   (Posix.py:3555)
(5456)    [4] [2023-05-12 18:21:54.618] [               ] Attribute part 'serial' not found   (Posix.py:3555)
(5457)    [4] [2023-05-12 18:21:54.618] [               ] Attribute part 'vendorId' not found   (Posix.py:3555)
(5458)    [4] [2023-05-12 18:21:54.618] [               ] Attribute part 'deviceId' not found   (Posix.py:3555)
(5459)    [4] [2023-05-12 18:21:54.618] [               ] Attribute part 'subsystemVendorId' not found   (Posix.py:3555)
(5460)    [4] [2023-05-12 18:21:54.618] [               ] Attribute part 'subsystemDeviceId' not found   (Posix.py:3555)
(5461)    [4] [2023-05-12 18:21:54.618] [               ] Attribute part 'revision' not found   (Posix.py:3555)
(5462)    [4] [2023-05-12 18:21:54.618] [               ] Attribute part 'serial' not found   (Posix.py:3555)
(5477)    [4] [2023-05-12 18:21:54.621] [               ] Attribute part 'serial' not found   (Posix.py:3555)
(5478)    [4] [2023-05-12 18:21:54.621] [               ] Attribute part 'description' not found   (Posix.py:3555)
(5479)    [4] [2023-05-12 18:21:54.621] [               ] Attribute part 'serial' not found   (Posix.py:3555)
(5480)    [4] [2023-05-12 18:21:54.621] [               ] Attribute part 'vendorId' not found   (Posix.py:3555)
(5481)    [4] [2023-05-12 18:21:54.621] [               ] Attribute part 'deviceId' not found   (Posix.py:3555)
(5482)    [4] [2023-05-12 18:21:54.621] [               ] Attribute part 'subsystemVendorId' not found   (Posix.py:3555)
(5483)    [4] [2023-05-12 18:21:54.621] [               ] Attribute part 'subsystemDeviceId' not found   (Posix.py:3555)
(5484)    [4] [2023-05-12 18:21:54.621] [               ] Attribute part 'revision' not found   (Posix.py:3555)
(5485)    [4] [2023-05-12 18:21:54.621] [               ] Attribute part 'serial' not found   (Posix.py:3555)
(5486)    [4] [2023-05-12 18:21:54.621] [               ] Attribute part 'vendorId' not found   (Posix.py:3555)
(5487)    [4] [2023-05-12 18:21:54.622] [               ] Attribute part 'deviceId' not found   (Posix.py:3555)
(5488)    [4] [2023-05-12 18:21:54.622] [               ] Attribute part 'subsystemVendorId' not found   (Posix.py:3555)
(5489)    [4] [2023-05-12 18:21:54.622] [               ] Attribute part 'subsystemDeviceId' not found   (Posix.py:3555)
(5490)    [4] [2023-05-12 18:21:54.622] [               ] Attribute part 'revision' not found   (Posix.py:3555)
(5491)    [4] [2023-05-12 18:21:54.622] [               ] Attribute part 'description' not found   (Posix.py:3555)
(5492)    [4] [2023-05-12 18:21:54.622] [               ] Attribute part 'serial' not found   (Posix.py:3555)
(5493)    [4] [2023-05-12 18:21:54.622] [               ] Attribute part 'vendorId' not found   (Posix.py:3555)
(5494)    [4] [2023-05-12 18:21:54.622] [               ] Attribute part 'deviceId' not found   (Posix.py:3555)
(5495)    [4] [2023-05-12 18:21:54.622] [               ] Attribute part 'subsystemVendorId' not found   (Posix.py:3555)
(5496)    [4] [2023-05-12 18:21:54.622] [               ] Attribute part 'subsystemDeviceId' not found   (Posix.py:3555)
(5497)    [4] [2023-05-12 18:21:54.622] [               ] Attribute part 'revision' not found   (Posix.py:3555)
(5498)    [4] [2023-05-12 18:21:54.622] [               ] Attribute part 'serial' not found   (Posix.py:3555)
(5499)    [4] [2023-05-12 18:21:54.622] [               ] Attribute part 'description' not found   (Posix.py:3555)
(5500)    [4] [2023-05-12 18:21:54.622] [               ] Attribute part 'serial' not found   (Posix.py:3555)
(5501)    [4] [2023-05-12 18:21:54.622] [               ] Attribute part 'vendorId' not found   (Posix.py:3555)
(5502)    [4] [2023-05-12 18:21:54.622] [               ] Attribute part 'deviceId' not found   (Posix.py:3555)
(5503)    [4] [2023-05-12 18:21:54.622] [               ] Attribute part 'subsystemVendorId' not found   (Posix.py:3555)
(5504)    [4] [2023-05-12 18:21:54.622] [               ] Attribute part 'subsystemDeviceId' not found   (Posix.py:3555)
(5505)    [4] [2023-05-12 18:21:54.622] [               ] Attribute part 'revision' not found   (Posix.py:3555)
(5506)    [4] [2023-05-12 18:21:54.623] [               ] Attribute part 'serial' not found   (Posix.py:3555)
(5507)    [4] [2023-05-12 18:21:54.623] [               ] Attribute part 'vendorId' not found   (Posix.py:3555)
(5508)    [4] [2023-05-12 18:21:54.623] [               ] Attribute part 'deviceId' not found   (Posix.py:3555)
(5509)    [4] [2023-05-12 18:21:54.623] [               ] Attribute part 'subsystemVendorId' not found   (Posix.py:3555)
(5510)    [4] [2023-05-12 18:21:54.623] [               ] Attribute part 'subsystemDeviceId' not found   (Posix.py:3555)
(5511)    [4] [2023-05-12 18:21:54.623] [               ] Attribute part 'revision' not found   (Posix.py:3555)
(5512)    [4] [2023-05-12 18:21:54.623] [               ] Attribute part 'description' not found   (Posix.py:3555)
(5513)    [4] [2023-05-12 18:21:54.623] [               ] Attribute part 'serial' not found   (Posix.py:3555)
(5514)    [4] [2023-05-12 18:21:54.623] [               ] Attribute part 'vendorId' not found   (Posix.py:3555)
(5515)    [4] [2023-05-12 18:21:54.623] [               ] Attribute part 'deviceId' not found   (Posix.py:3555)
(5516)    [4] [2023-05-12 18:21:54.623] [               ] Attribute part 'subsystemVendorId' not found   (Posix.py:3555)
(5517)    [4] [2023-05-12 18:21:54.623] [               ] Attribute part 'subsystemDeviceId' not found   (Posix.py:3555)
(5518)    [4] [2023-05-12 18:21:54.623] [               ] Attribute part 'revision' not found   (Posix.py:3555)
(5532)    [4] [2023-05-12 18:21:54.625] [               ] Attribute part 'serial' not found   (Posix.py:3555)
(5533)    [4] [2023-05-12 18:21:54.626] [               ] Attribute part 'size' not found   (Posix.py:3555)
(5534)    [4] [2023-05-12 18:21:54.626] [               ] Attribute part 'description' not found   (Posix.py:3555)
(5535)    [4] [2023-05-12 18:21:54.626] [               ] Attribute part 'vendor' not found   (Posix.py:3555)
(5536)    [4] [2023-05-12 18:21:54.626] [               ] Attribute part 'serial' not found   (Posix.py:3555)
(5537)    [4] [2023-05-12 18:21:54.626] [               ] Attribute part 'vendorId' not found   (Posix.py:3555)
(5538)    [4] [2023-05-12 18:21:54.626] [               ] Attribute part 'deviceId' not found   (Posix.py:3555)
(5539)    [4] [2023-05-12 18:21:54.626] [               ] Attribute part 'subsystemVendorId' not found   (Posix.py:3555)
(5540)    [4] [2023-05-12 18:21:54.626] [               ] Attribute part 'subsystemDeviceId' not found   (Posix.py:3555)
(5541)    [4] [2023-05-12 18:21:54.626] [               ] Attribute part 'revision' not found   (Posix.py:3555)
(5542)    [4] [2023-05-12 18:21:54.626] [               ] Attribute part 'size' not found   (Posix.py:3555)
(5545)    [4] [2023-05-12 18:21:54.627] [               ] Attribute part 'product' not found   (Posix.py:3555)
(5546)    [4] [2023-05-12 18:21:54.627] [               ] Attribute part 'vendor' not found   (Posix.py:3555)
(5547)    [4] [2023-05-12 18:21:54.627] [               ] Attribute part 'product' not found   (Posix.py:3555)
(5548)    [4] [2023-05-12 18:21:54.627] [               ] Attribute part 'serial' not found   (Posix.py:3555)
(5549)    [4] [2023-05-12 18:21:54.627] [               ] Attribute part 'size' not found   (Posix.py:3555)
(5550)    [4] [2023-05-12 18:21:54.627] [               ] Attribute part 'product' not found   (Posix.py:3555)
(5551)    [4] [2023-05-12 18:21:54.627] [               ] Attribute part 'vendor' not found   (Posix.py:3555)
(5552)    [4] [2023-05-12 18:21:54.627] [               ] Attribute part 'product' not found   (Posix.py:3555)
(5553)    [4] [2023-05-12 18:21:54.627] [               ] Attribute part 'serial' not found   (Posix.py:3555)
(6452)    [5] [2023-05-12 18:21:54.632] [               ] Sending hardware information to service   (setup.py:571)
(6459)    [5] [2023-05-12 18:21:56.316] [               ] Swapoff all to avoid disk in use .....   (setup.py:579)
(6464)    [5] [2023-05-12 18:21:56.324] [               ] Clear all existing LVM volume groups....   (<string>:163)
(6469)    [5] [2023-05-12 18:21:56.431] [               ] Remove all dead Links in /dev....   (<string>:185)
(6470)    [5] [2023-05-12 18:21:56.434] [               ] Remove all empty directories in /dev....   (<string>:187)
(6471)    [5] [2023-05-12 18:21:56.436] [               ] Look for still existing LVM volume groups....   (<string>:190)
(6490)    [3] [2023-05-12 18:21:56.528] [               ] Command '/sbin/modprobe edd' failed (1):
(6491)    modprobe: ERROR: could not insert 'edd': No such device
(6492)       (Posix.py:1378)
(6523)    [5] [2023-05-12 18:21:56.552] [               ] geometryLine : /dev/nvme0n1: 953869 cylinders, 64 heads, 32 sectors/track   (Posix.py:1557)
(6530)    [5] [2023-05-12 18:21:56.560] [               ] geometryLine : /dev/nvme0n1: 953869 cylinders, 64 heads, 32 sectors/track   (Posix.py:1557)
(6538)    [5] [2023-05-12 18:21:56.568] [               ] geometryLine : /dev/nvme0n1: 953869 cylinders, 64 heads, 32 sectors/track   (Posix.py:1557)
(6545)    [5] [2023-05-12 18:21:56.576] [               ] geometryLine : /dev/nvme0n1: 953869 cylinders, 64 heads, 32 sectors/track   (Posix.py:1557)
(6603)    [5] [2023-05-12 18:21:56.616] [               ] Disk order:   (<string>:68)
(6604)    [4] [2023-05-12 18:21:56.619] [               ] Warning 'subprocess 764 is still running' in file 'subprocess.py', line 1072   (logging.py:848)
(6618)    [4] [2023-05-12 18:21:56.620] [               ] Warning 'unclosed file <_io.TextIOWrapper name=10 encoding='UTF-8'>' in file '<string>', line 70   (logging.py:848)
(6630)    [5] [2023-05-12 18:21:56.620] [               ]  - /dev/nvme0n1 (rotational? False) (sizeG 931) (uuid 0a42ecdb-5335-46c0-bea3-39e01479c92d)   (<string>:70)
(6631)    [5] [2023-05-12 18:21:56.620] [               ] Normally we using disk 0   (setup.py:586)
(6646)    [3] [2023-05-12 18:21:56.668] [               ] Command '/sbin/modprobe edd' failed (1):
(6647)    modprobe: ERROR: could not insert 'edd': No such device
(6648)       (Posix.py:1378)
(6679)    [5] [2023-05-12 18:21:56.692] [               ] geometryLine : /dev/nvme0n1: 953869 cylinders, 64 heads, 32 sectors/track   (Posix.py:1557)
(6686)    [5] [2023-05-12 18:21:56.700] [               ] geometryLine : /dev/nvme0n1: 953869 cylinders, 64 heads, 32 sectors/track   (Posix.py:1557)
(6694)    [5] [2023-05-12 18:21:56.708] [               ] geometryLine : /dev/nvme0n1: 953869 cylinders, 64 heads, 32 sectors/track   (Posix.py:1557)
(6701)    [5] [2023-05-12 18:21:56.716] [               ] geometryLine : /dev/nvme0n1: 953869 cylinders, 64 heads, 32 sectors/track   (Posix.py:1557)
(6759)    [4] [2023-05-12 18:21:56.759] [               ] Warning 'subprocess 778 is still running' in file 'subprocess.py', line 1072   (logging.py:848)
(6771)    [4] [2023-05-12 18:21:56.759] [               ] Warning 'unclosed file <_io.TextIOWrapper name=10 encoding='UTF-8'>' in file '/tmp/setup.py', line 589   (logging.py:848)
(6781)    [5] [2023-05-12 18:21:56.760] [               ] multi_disk_mode is 0 - so we use disk number: 0 uuid:0a42ecdb-5335-46c0-bea3-39e01479c92d   (setup.py:589)
(6782)    [5] [2023-05-12 18:21:56.760] [               ] Using disk device /dev/nvme0n1   (setup.py:591)
(6783)    [5] [2023-05-12 18:21:56.760] [               ] Check if disk /dev/nvme0n1 is ssd or classic (rotational) HD   (<string>:75)
(6784)    [5] [2023-05-12 18:21:56.760] [               ] Disk /dev/nvme0n1 is not rotational (SSD)   (<string>:91)
(6785)    [4] [2023-05-12 18:21:56.761] [               ] Warning 'subprocess 779 is still running' in file 'subprocess.py', line 1072   (logging.py:848)
(6797)    [4] [2023-05-12 18:21:56.761] [               ] Warning 'unclosed file <_io.TextIOWrapper name=10 encoding='UTF-8'>' in file '/tmp/setup.py', line 592   (logging.py:848)
(6807)    [5] [2023-05-12 18:21:56.761] [               ] Required winpe partition (4) size is 6000M   (setup.py:619)
(6808)    [5] [2023-05-12 18:21:56.761] [               ] systemPartitionSizeM is: 946869   (setup.py:624)
(6809)    [5] [2023-05-12 18:21:56.762] [               ] /mnt/hd does not exists as directory - creating   (<string>:394)
(6814)    [5] [2023-05-12 18:21:56.771] [               ] maxDiskRange is 1   (setup.py:950)
(6815)    [5] [2023-05-12 18:21:56.771] [               ] diskcounter is now 0   (setup.py:953)
(6816)    [5] [2023-05-12 18:21:56.771] [               ] Disk order:   (<string>:68)
(6817)    [4] [2023-05-12 18:21:56.774] [               ] Warning 'subprocess 783 is still running' in file 'subprocess.py', line 1072   (logging.py:848)
(6831)    [5] [2023-05-12 18:21:56.774] [               ]  - /dev/nvme0n1 (rotational? False) (sizeG 931) (uuid 0a42ecdb-5335-46c0-bea3-39e01479c92d)   (<string>:70)
(6832)    [5] [2023-05-12 18:21:56.774] [               ] Using disk device /dev/nvme0n1   (setup.py:956)
(6833)    [5] [2023-05-12 18:21:56.774] [               ] Check if disk /dev/nvme0n1 is ssd or classic (rotational) HD   (<string>:75)
(6834)    [5] [2023-05-12 18:21:56.775] [               ] Disk /dev/nvme0n1 is not rotational (SSD)   (<string>:91)
(6835)    [4] [2023-05-12 18:21:56.775] [               ] Warning 'subprocess 784 is still running' in file 'subprocess.py', line 1072   (logging.py:848)
(6847)    [4] [2023-05-12 18:21:56.776] [               ] Warning 'unclosed file <_io.TextIOWrapper name=10 encoding='UTF-8'>' in file '/tmp/setup.py', line 957   (logging.py:848)
(6857)    [5] [2023-05-12 18:21:56.776] [               ] Clear first 512 bytes on /dev/nvme0n1 to remove grub and so on ...   (setup.py:978)
(6862)    [5] [2023-05-12 18:21:58.786] [               ] Clear partition table of /dev/nvme0n1   (setup.py:983)
(6881)    [5] [2023-05-12 18:22:00.803] [               ] Create EFI system partition on /dev/nvme0n1p1   (setup.py:987)
(6923)    [5] [2023-05-12 18:22:03.837] [               ] Make file system on EFI system partition on /dev/nvme0n1p1   (setup.py:991)
(6930)    [5] [2023-05-12 18:22:03.844] [               ] Create MS reserved partition on /dev/nvme0n1p2   (setup.py:993)
(6963)    [5] [2023-05-12 18:22:04.958] [               ] Create system partition on /dev/nvme0n1p3 start: 0M, size: 946869M   (<string>:263)
(7009)    [5] [2023-05-12 18:22:07.986] [               ] /dev/nvme0n1p3 exists as device - fine   (<string>:248)
(7010)    [5] [2023-05-12 18:22:07.993] [               ] Partition /dev/nvme0n1p3 has a correct block alignment   (<string>:154)
(7023)    [5] [2023-05-12 18:22:08.003] [               ] Create file system ntfs on partition system (/dev/nvme0n1p3)   (<string>:339)
(7044)    [5] [2023-05-12 18:22:23.291] [               ] /dev/nvme0n1p3 exists as device - fine   (<string>:329)
(7045)    [5] [2023-05-12 18:22:23.291] [               ] /dev/nvme0n1p3 created and formated   (<string>:365)
(7046)    [5] [2023-05-12 18:22:23.291] [               ] Check winpe partition   (setup.py:1072)
(7047)    [5] [2023-05-12 18:22:23.291] [               ] Check winpe partition at number 4   (setup.py:1074)
(7048)    [5] [2023-05-12 18:22:23.292] [               ] Create winpe partition on /dev/nvme0n1p4 start: 947869M, size: 6000M   (<string>:263)
(7096)    [5] [2023-05-12 18:22:26.325] [               ] /dev/nvme0n1p4 exists as device - fine   (<string>:248)
(7097)    [5] [2023-05-12 18:22:26.333] [               ] Partition /dev/nvme0n1p4 has a correct block alignment   (<string>:154)
(7098)    [5] [2023-05-12 18:22:26.335] [               ] /dev/nvme0n1p4 exists as device - fine   (<string>:248)
(7099)    [5] [2023-05-12 18:22:26.342] [               ] Partition /dev/nvme0n1p4 has a correct block alignment   (<string>:154)
(7100)    [5] [2023-05-12 18:22:26.344] [               ] /dev/nvme0n1p4 is not mounted   (<string>:452)
(7101)    [5] [2023-05-12 18:22:26.344] [               ] We use fat32 for winpe because we are on uefi   (setup.py:1186)
(7102)    [5] [2023-05-12 18:22:26.344] [               ] Create file system fat32 on partition winpe (/dev/nvme0n1p4)   (<string>:339)
(7122)    [5] [2023-05-12 18:22:41.446] [               ] /dev/nvme0n1p4 exists as device - fine   (<string>:329)
(7123)    [5] [2023-05-12 18:22:41.446] [               ] /dev/nvme0n1p4 created and formated   (<string>:365)
(7124)    [5] [2023-05-12 18:22:41.446] [               ] check efi boot order   (setup.py:1264)
(7157)    [5] [2023-05-12 18:22:43.549] [               ] collect disk and partition infos   (setup.py:1286)
(7158)    [4] [2023-05-12 18:22:43.554] [               ] Warning 'subprocess 854 is still running' in file 'subprocess.py', line 1072   (logging.py:848)
(7170)    [4] [2023-05-12 18:22:43.554] [               ] Warning 'unclosed file <_io.TextIOWrapper name=10 encoding='UTF-8'>' in file '/tmp/setup.py', line 1287   (logging.py:848)
(7180)    [5] [2023-05-12 18:22:43.554] [               ] we have uuid e8f33dc8-a8b7-4ed8-9210-adb0a5431ee5 on /dev/nvme0n1   (setup.py:1288)
(7190)    [5] [2023-05-12 18:22:43.569] [               ] We save all partition infos ....   (setup.py:1332)
(7191)    [5] [2023-05-12 18:22:43.569] [               ] Check if disk /dev/nvme0n1 is raid member   (<string>:129)
(7192)    [5] [2023-05-12 18:22:43.573] [               ] Disk /dev/nvme0n1 is no (Soft/Fake) Raid Member   (<string>:144)
(7193)    [4] [2023-05-12 18:22:43.574] [               ] Warning 'subprocess 856 is still running' in file 'subprocess.py', line 1072   (logging.py:848)
(7205)    [4] [2023-05-12 18:22:43.574] [               ] Warning 'unclosed file <_io.TextIOWrapper name=10 encoding='UTF-8'>' in file '/tmp/setup.py', line 1336   (logging.py:848)
(7215)    [5] [2023-05-12 18:22:43.574] [               ] Check if disk /dev/nvme0n1 is raid  HD   (<string>:97)
(7216)    [5] [2023-05-12 18:22:43.574] [               ] Disk /dev/nvme0n1 is no (Soft/Fake) Raid   (<string>:123)
(7235)    [5] [2023-05-12 18:22:43.581] [               ] has disk /dev/nvme0n1 a gpt partition table ?   (setup.py:1345)
(7236)    [5] [2023-05-12 18:22:43.585] [               ] disk /dev/nvme0n1 have a gpt partition table:   (setup.py:1352)
(7257)    [5] [2023-05-12 18:22:43.593] [               ] We have 4 partitions on disk /dev/nvme0n1   (setup.py:1361)
(7258)    [4] [2023-05-12 18:22:43.596] [               ] Warning 'subprocess 862 is still running' in file 'subprocess.py', line 1072   (logging.py:848)
(7270)    [4] [2023-05-12 18:22:43.596] [               ] Warning 'unclosed file <_io.TextIOWrapper name=10 encoding='UTF-8'>' in file '/tmp/setup.py', line 1362   (logging.py:848)
(7280)    [5] [2023-05-12 18:22:43.596] [               ] We have uuid e8f33dc8-a8b7-4ed8-9210-adb0a5431ee5  on disk /dev/nvme0n1   (setup.py:1363)
(7281)    [4] [2023-05-12 18:22:43.599] [               ] Warning 'subprocess 863 is still running' in file 'subprocess.py', line 1072   (logging.py:848)
(7293)    [4] [2023-05-12 18:22:43.599] [               ] Warning 'unclosed file <_io.TextIOWrapper name=10 encoding='UTF-8'>' in file '/tmp/setup.py', line 1366   (logging.py:848)
(7309)    [4] [2023-05-12 18:22:43.611] [               ] Warning 'subprocess 867 is still running' in file 'subprocess.py', line 1072   (logging.py:848)
(7327)    [4] [2023-05-12 18:22:43.620] [               ] Warning 'subprocess 871 is still running' in file 'subprocess.py', line 1072   (logging.py:848)
(7345)    [4] [2023-05-12 18:22:43.632] [               ] Warning 'subprocess 875 is still running' in file 'subprocess.py', line 1072   (logging.py:848)
(7363)    [4] [2023-05-12 18:22:43.644] [               ] Warning 'subprocess 879 is still running' in file 'subprocess.py', line 1072   (logging.py:848)
(7375)    [4] [2023-05-12 18:22:43.645] [               ] Warning 'unclosed file <_io.TextIOWrapper name=10 encoding='UTF-8'>' in file '/tmp/setup.py', line 1409   (logging.py:848)
(7385)    [4] [2023-05-12 18:22:43.648] [               ] Warning 'subprocess 880 is still running' in file 'subprocess.py', line 1072   (logging.py:848)
(7397)    [4] [2023-05-12 18:22:43.648] [               ] Warning 'unclosed file <_io.TextIOWrapper name=10 encoding='UTF-8'>' in file '/tmp/setup.py', line 1410   (logging.py:848)
(7407)    [4] [2023-05-12 18:22:43.651] [               ] Warning 'subprocess 881 is still running' in file 'subprocess.py', line 1072   (logging.py:848)
(7419)    [4] [2023-05-12 18:22:43.653] [               ] Warning 'subprocess 882 is still running' in file 'subprocess.py', line 1072   (logging.py:848)
(7431)    [4] [2023-05-12 18:22:43.656] [               ] Warning 'subprocess 883 is still running' in file 'subprocess.py', line 1072   (logging.py:848)
(7443)    [4] [2023-05-12 18:22:43.658] [               ] Warning 'subprocess 884 is still running' in file 'subprocess.py', line 1072   (logging.py:848)
(7455)    [4] [2023-05-12 18:22:43.662] [               ] Warning 'subprocess 885 is still running' in file 'subprocess.py', line 1072   (logging.py:848)
(7467)    [4] [2023-05-12 18:22:43.666] [               ] Warning 'subprocess 886 is still running' in file 'subprocess.py', line 1072   (logging.py:848)
(7479)    [5] [2023-05-12 18:22:43.666] [               ] mount winpe partition   (setup.py:1418)
(7480)    [5] [2023-05-12 18:22:43.666] [               ] mountpoint /mnt/hd exists   (<string>:408)
(7481)    [5] [2023-05-12 18:22:43.666] [               ] mountpoint /mnt/hd >> /dev/null 2>&1   (<string>:413)
(7482)    [5] [2023-05-12 18:22:43.667] [               ] Nothing mounted on /mnt/hd - fine   (<string>:428)
(7483)    [5] [2023-05-12 18:22:43.669] [               ] /dev/nvme0n1p4 is not mounted   (<string>:452)
(7484)    [5] [2023-05-12 18:22:43.669] [               ] We use vfat for winpe because we are on uefi   (setup.py:1422)
(7489)    [5] [2023-05-12 18:22:43.677] [               ]  mount -t vfat /dev/nvme0n1p4 /mnt/hd   (<string>:468)
(7490)    [5] [2023-05-12 18:22:48.682] [               ] /dev/nvme0n1p4 mounted on /mnt/hd - fine..   (<string>:476)
(8435)    [4] [2023-05-12 18:23:04.202] [               ] Warning 'unclosed file <_io.BufferedReader name='/mnt/hd/opsi/unattend.xml'>' in file '/tmp/setup.py', line 1463   (logging.py:848)
(8746)    [5] [2023-05-12 18:23:05.694] [               ] installing drivers from win11-x64/drivers   (setup.py:1500)
(8747)    [5] [2023-05-12 18:23:05.697] [               ] Found driver directory win11-x64/drivers   (setup.py:1503)
(8750)    [5] [2023-05-12 18:23:05.713] [               ] Additional drivers for integration found using byAudit (System) for vendor: 'Micro-Star International Co., Ltd' model : 'MS-7C02 (To be filled by O.E.M.)' Check if drivers are available.   (WindowsDrivers.py:487)
(8752)    [5] [2023-05-12 18:23:05.725] [               ] Additional drivers for integration found using byAudit (Board) for vendor: 'Micro-Star International Co., Ltd' model : 'MS-7C02 (To be filled by O.E.M.)' Check if drivers are available.   (WindowsDrivers.py:531)
(8766)    [3] [2023-05-12 18:23:05.741] [               ] PCI_DEVICE vendor directory 'win11-x64/drivers/pciids/15B7' not found   (WindowsDrivers.py:91)
(8768)    [3] [2023-05-12 18:23:05.742] [               ] PCI_DEVICE vendor directory 'win11-x64/drivers/pciids/1022' not found   (WindowsDrivers.py:91)
(8770)    [3] [2023-05-12 18:23:05.742] [               ] PCI_DEVICE vendor directory 'win11-x64/drivers/pciids/1022' not found   (WindowsDrivers.py:91)
(8772)    [3] [2023-05-12 18:23:05.743] [               ] PCI_DEVICE vendor directory 'win11-x64/drivers/pciids/1022' not found   (WindowsDrivers.py:91)
(8774)    [3] [2023-05-12 18:23:05.743] [               ] PCI_DEVICE vendor directory 'win11-x64/drivers/pciids/1022' not found   (WindowsDrivers.py:91)
(8776)    [3] [2023-05-12 18:23:05.744] [               ] PCI_DEVICE vendor directory 'win11-x64/drivers/pciids/1022' not found   (WindowsDrivers.py:91)
(8778)    [3] [2023-05-12 18:23:05.744] [               ] PCI_DEVICE vendor directory 'win11-x64/drivers/pciids/1022' not found   (WindowsDrivers.py:91)
(8780)    [3] [2023-05-12 18:23:05.745] [               ] PCI_DEVICE vendor directory 'win11-x64/drivers/pciids/1022' not found   (WindowsDrivers.py:91)
(8782)    [3] [2023-05-12 18:23:05.745] [               ] PCI_DEVICE vendor directory 'win11-x64/drivers/pciids/1022' not found   (WindowsDrivers.py:91)
(8784)    [3] [2023-05-12 18:23:05.746] [               ] PCI_DEVICE vendor directory 'win11-x64/drivers/pciids/1022' not found   (WindowsDrivers.py:91)
(8786)    [3] [2023-05-12 18:23:05.746] [               ] PCI_DEVICE vendor directory 'win11-x64/drivers/pciids/1022' not found   (WindowsDrivers.py:91)
(8788)    [3] [2023-05-12 18:23:05.747] [               ] PCI_DEVICE vendor directory 'win11-x64/drivers/pciids/1022' not found   (WindowsDrivers.py:91)
(8790)    [3] [2023-05-12 18:23:05.747] [               ] PCI_DEVICE vendor directory 'win11-x64/drivers/pciids/1022' not found   (WindowsDrivers.py:91)
(8792)    [3] [2023-05-12 18:23:05.748] [               ] PCI_DEVICE vendor directory 'win11-x64/drivers/pciids/1022' not found   (WindowsDrivers.py:91)
(8794)    [3] [2023-05-12 18:23:05.748] [               ] PCI_DEVICE vendor directory 'win11-x64/drivers/pciids/1022' not found   (WindowsDrivers.py:91)
(8796)    [3] [2023-05-12 18:23:05.749] [               ] PCI_DEVICE vendor directory 'win11-x64/drivers/pciids/1022' not found   (WindowsDrivers.py:91)
(8798)    [3] [2023-05-12 18:23:05.750] [               ] PCI_DEVICE vendor directory 'win11-x64/drivers/pciids/1022' not found   (WindowsDrivers.py:91)
(8800)    [3] [2023-05-12 18:23:05.750] [               ] PCI_DEVICE vendor directory 'win11-x64/drivers/pciids/1022' not found   (WindowsDrivers.py:91)
(8802)    [3] [2023-05-12 18:23:05.751] [               ] PCI_DEVICE vendor directory 'win11-x64/drivers/pciids/1022' not found   (WindowsDrivers.py:91)
(8804)    [3] [2023-05-12 18:23:05.752] [               ] PCI_DEVICE vendor directory 'win11-x64/drivers/pciids/1022' not found   (WindowsDrivers.py:91)
(8806)    [3] [2023-05-12 18:23:05.753] [               ] PCI_DEVICE vendor directory 'win11-x64/drivers/pciids/1022' not found   (WindowsDrivers.py:91)
(8808)    [3] [2023-05-12 18:23:05.753] [               ] PCI_DEVICE vendor directory 'win11-x64/drivers/pciids/1022' not found   (WindowsDrivers.py:91)
(8810)    [3] [2023-05-12 18:23:05.754] [               ] PCI_DEVICE vendor directory 'win11-x64/drivers/pciids/1022' not found   (WindowsDrivers.py:91)
(8812)    [3] [2023-05-12 18:23:05.755] [               ] PCI_DEVICE vendor directory 'win11-x64/drivers/pciids/1022' not found   (WindowsDrivers.py:91)
(8814)    [3] [2023-05-12 18:23:05.756] [               ] PCI_DEVICE vendor directory 'win11-x64/drivers/pciids/1022' not found   (WindowsDrivers.py:91)
(8816)    [3] [2023-05-12 18:23:05.756] [               ] PCI_DEVICE vendor directory 'win11-x64/drivers/pciids/1022' not found   (WindowsDrivers.py:91)
(8818)    [3] [2023-05-12 18:23:05.757] [               ] PCI_DEVICE vendor directory 'win11-x64/drivers/pciids/10DE' not found   (WindowsDrivers.py:91)
(8820)    [3] [2023-05-12 18:23:05.758] [               ] PCI_DEVICE vendor directory 'win11-x64/drivers/pciids/1022' not found   (WindowsDrivers.py:91)
(8822)    [3] [2023-05-12 18:23:05.759] [               ] PCI_DEVICE vendor directory 'win11-x64/drivers/pciids/1022' not found   (WindowsDrivers.py:91)
(8824)    [3] [2023-05-12 18:23:05.759] [               ] PCI_DEVICE vendor directory 'win11-x64/drivers/pciids/1022' not found   (WindowsDrivers.py:91)
(8826)    [3] [2023-05-12 18:23:05.760] [               ] PCI_DEVICE vendor directory 'win11-x64/drivers/pciids/1022' not found   (WindowsDrivers.py:91)
(8828)    [3] [2023-05-12 18:23:05.761] [               ] PCI_DEVICE vendor directory 'win11-x64/drivers/pciids/10DE' not found   (WindowsDrivers.py:91)
(8830)    [3] [2023-05-12 18:23:05.762] [               ] PCI_DEVICE vendor directory 'win11-x64/drivers/pciids/1022' not found   (WindowsDrivers.py:91)
(8832)    [3] [2023-05-12 18:23:05.763] [               ] PCI_DEVICE vendor directory 'win11-x64/drivers/pciids/10EC' not found   (WindowsDrivers.py:91)
(8834)    [3] [2023-05-12 18:23:05.764] [               ] PCI_DEVICE vendor directory 'win11-x64/drivers/pciids/1022' not found   (WindowsDrivers.py:91)
(8836)    [3] [2023-05-12 18:23:05.764] [               ] PCI_DEVICE vendor directory 'win11-x64/drivers/pciids/1022' not found   (WindowsDrivers.py:91)
(8838)    [3] [2023-05-12 18:23:05.765] [               ] PCI_DEVICE vendor directory 'win11-x64/drivers/pciids/1022' not found   (WindowsDrivers.py:91)
(8840)    [3] [2023-05-12 18:23:05.766] [               ] PCI_DEVICE vendor directory 'win11-x64/drivers/pciids/1022' not found   (WindowsDrivers.py:91)
(8842)    [3] [2023-05-12 18:23:05.767] [               ] PCI_DEVICE vendor directory 'win11-x64/drivers/pciids/1022' not found   (WindowsDrivers.py:91)
(8848)    [3] [2023-05-12 18:23:05.769] [               ] HDAUDIO_DEVICE vendor directory 'win11-x64/drivers/hdaudioids/10EC' not found   (WindowsDrivers.py:91)
(8850)    [3] [2023-05-12 18:23:05.769] [               ] HDAUDIO_DEVICE vendor directory 'win11-x64/drivers/hdaudioids/10DE' not found   (WindowsDrivers.py:91)
(8865)    [5] [2023-05-12 18:23:05.770] [               ] Creating work.cmd   (setup.py:1510)
(8961)    [5] [2023-05-12 18:23:05.967] [               ] drvloadlist doesn't exist   (setup.py:1572)
(8967)    [5] [2023-05-12 18:23:06.046] [               ] Creating startnet.cmd   (setup.py:1613)
(8968)    [5] [2023-05-12 18:23:06.046] [               ] Creating diskpart.txt to delete winpe   (setup.py:1645)
(8969)    [5] [2023-05-12 18:23:06.046] [               ] No Partition IDs to backup - do not create /mnt/hd/opsi/partunhide.txt   (setup.py:1688)
(8970)    [5] [2023-05-12 18:23:06.046] [               ] No Partition IDs to backup - do not create /mnt/hd/opsi/parthide.txt   (setup.py:1709)
(8971)    [5] [2023-05-12 18:23:06.046] [               ] write disk and partition infos to /mnt/hd/opsi/diskinfo.ini   (setup.py:1715)
(8972)    [5] [2023-05-12 18:23:06.046] [               ] Here comes the /mnt/hd/opsi/diskinfo.ini   (setup.py:1720)
(9021)    [5] [2023-05-12 18:23:06.060] [               ] Creating opsi-script-infos.ini   (setup.py:1730)
(9022)    [5] [2023-05-12 18:23:06.060] [               ] Patching unattend.xml and config.ini   (setup.py:1754)
(9083)    [5] [2023-05-12 18:23:07.308] [               ] Here comes the unattend.xml    (setup.py:1760)
(9334)    [5] [2023-05-12 18:23:07.321] [               ] Reading config.ini data: config_service.url: https://10.10.10.252:4447/rpc    (setup.py:1777)
(9335)    [5] [2023-05-12 18:23:07.321] [               ]  config_service.url from clientconfig: https://10.10.10.252:4447/rpc    (setup.py:1778)
(9397)    [5] [2023-05-12 18:23:07.388] [               ] Current (net) boot entry: UEFI: PXE IPV4 Realtek PCIe GBE Family Controller   (setup.py:1793)
(9434)    [5] [2023-05-12 18:23:07.600] [               ] deleting opsibootimage boot label   (setup.py:1802)
(9455)    [5] [2023-05-12 18:23:07.688] [               ] setting winpe to the top of winpe boot order   (setup.py:1805)
(9462)    [3] [2023-05-12 18:23:07.714] [               ] efibootmgrError   (setup.py:1823)
(9463)    [3] [2023-05-12 18:23:07.714] [               ] Command '/bin/efibootmgr -c --disk /dev/nvme0n1 --part 4 -L opsitempwinpe --loader \\EFI\\boot\\bootx64.efi' failed (5):
(9464)    Could not prepare Boot variable: No space left on device
(9465)       (setup.py:1824)
(9476)    [5] [2023-05-12 18:23:07.762] [               ] found device: 0000   (<string>:627)
(9477)    [5] [2023-05-12 18:23:07.762] [               ] found device: 0001   (<string>:627)
(9478)    [4] [2023-05-12 18:23:08.766] [               ] Warning 'OPSI.Logger.logException is deprecated, instead use logger.log with exc_info=True.' in file 'OPSI/Logger.py', line 422   (logging.py:848)
(9487)    [2] [2023-05-12 18:23:08.766] [               ] local variable 'labelID' referenced before assignment   (Logger.py:423)
(9488)    Traceback (most recent call last):
(9489)      File "run-master", line 2018, in <module>
(9490)      File "/tmp/setup.py", line 1830, in <module>
(9491)        setFirstUefiBoot('opsitempwinpe')
(9492)      File "<string>", line 632, in setFirstUefiBoot
(9493)    UnboundLocalError: local variable 'labelID' referenced before assignment
(9502)    [5] [2023-05-12 18:23:08.848] [               ] EXITING   (run-master:2091)
(9503)    [5] [2023-05-12 18:23:08.848] [               ] Writing log to service   (run-master:2097)

[Seelenschnitter]

Damit Andere nicht auch daran scheitern:

Es gab wohl beim Bootloader und dem NVRAM ein Problem. Als Lösung ging nun:

Die Bootpartition_Size im Netboot Produkt hochsetzen.
oder
Nach einem BIOS Update des Herstellers suchen und ob dort was an der BIOS Security geändert wurden.

Beide Dinge habe ich mehrfach getestet und diese haben immer funktioniert. Damit ist das Ganze gelöst. Danke

[m.radtke]

Hi,

mit bootpartition_size meinst du die erste Partition, also die EFI?

Gruß
Mathias

[Seelenschnitter]

Denke das müsste die sein ja.

Unter Netboot-Produkte - win11x64 und rechts die Property in der Liste. Steht nun aber auch wieder auf 0, da es nun auch wieder ohne funktioniert bei winpenetworkmode.

[Seelenschnitter]

So nu ist das eine behoben und weiter geht es:

Jetzt sagen gerne einige der Rechner bei der Installation:
"Eine Partition auf dem Datenträger "0" konnte nicht formatiert werden. Der Zieldatenträger, die Zielpartition oder das Zielvolume unterstützt den angegebenen Vorgang nicht. Der Fehler ist beim Anwenden der Einstellung <DiskConfiguration> der Antwortdatei für die unbeaufsichtigte Installation aufgetreten. Fehlercode: 0x80300024"

Code: Alles auswählen

(10585)   [3] [2023-05-13 19:43:06.436] []       Prog: Request failed (Method Post). No connection to server could be established. Line: 1918
(10588)   [3] [2023-05-13 19:43:06.436] []       Server (10.10.10.252) unreachable. Could not resolve FQDN to valid IP-Address.
(10593)   [3] [2023-05-13 19:43:06.436] []       Prog: Request failed (Method Post). No connection to server could be established. Line: 1918
(10596)   [3] [2023-05-13 19:43:06.436] []       Server (10.10.10.252) unreachable. Could not resolve FQDN to valid IP-Address.
(10597)   [3] [2023-05-13 19:43:06.436] []       Error: Server (10.10.10.252) unreachable. Could not resolve FQDN to valid IP-Address.
(10799)   [4] [2023-05-13 19:43:17.597] []     Warning: Existing service connection will be reopend. This may cause critical errors. Do not do this, if you are not really sure what you doing.

Wireshark etc sagen ist alles da, der Name ist auflösbar, DNS läuft fehlerfrei.
Setze ich es nochmal auf Setup und reboote mit PXE Boot ist auch hier das Problem weg.
(Ich werde nun erstmal sowieso den neuen Switch konfigurieren und einsetzen + VLAN etc und dann gucke ich nochmal)

Kann ich die fertige OPSI VM ohne Probleme auf das neue Lubuntu updaten, was er anbietet oder ist dass noch nicht freigegeben oder ähnliches?

[m.radtke]

Moin

du kannst auf das neue Lubuntu aktualisieren, die Repos müssen dann auf den aktuellen Ubunut Unterbau für opsi angepasst werden und dann läuft das so weiter.

Gruß
Mathias

[Seelenschnitter]

Also nach dem Update ging OPSI-Configed nicht mehr. Habe dann nen Snapshot vor dem Update zurück gespielt. Wie genau passe ich dann die Repos an?

Was mir noch weiter aufgefallen ist, dass wenn ich das opsi-uefi-netboot Produkt verwende einige PCs dann nach dem Neustart das Paket für Windows via PxE ziehen und andere fallen in eine ewige Installation. Also er ändert die Bootreihenfolge nach der Windows Installation, bootet dann von der Festplatte und beginnt erneut Windows zu installieren (also am Punkt wo er die Dateien kopiert etc) und das immer und immer wieder nach dem Reboot. Während identische PCs teilweise sauber installieren.

Ich find es auch komisch, dass sowas in den Logs auftaucht:

Code: Alles auswählen

(10850)   [3] [2023-05-25 17:32:00.153] [] readconfig failed: Perhaps got defaults
(10855)   [1] [2023-05-25 17:32:00.153] [] 
(10856)   [1] [2023-05-25 17:32:00.153] [] ============ Version 4.12.9.1 script "c:\opsi\setup.opsiscript"
(10857)   [1] [2023-05-25 17:32:00.153] []              used script encoding: utf8
(10858)   [1] [2023-05-25 17:32:00.153] []              used system encoding: cp1252
(10859)   [1] [2023-05-25 17:32:00.153] []              start: 2023-05-25  17:32:00
(10860)   [1] [2023-05-25 17:32:00.153] []              on client named    "MINWINPC"
(10861)   [1] [2023-05-25 17:32:00.153] []              loggedin user    ""
(10862)   [1] [2023-05-25 17:32:00.168] []              opsi-script running as    "MINWINPC$"
(10864)   [1] [2023-05-25 17:32:00.168] []              opsi-script running in standard script mode
(10865)   [1] [2023-05-25 17:32:00.168] [] Scaling for screen DPI: 96
(10866)   [1] [2023-05-25 17:32:00.168] [] executing: "c:\opsi\opsi-script\x64\opsi-script.exe"
(10867)   [1] [2023-05-25 17:32:00.168] [] system infos:
(10868)   [3] [2023-05-25 17:32:00.168] [] gethostname error 11001
(10869)   [1] [2023-05-25 17:32:00.168] [] XX-XX-XX-XX-XX-XX  -  PC hardware address
(10870)   [1] [2023-05-25 17:32:00.168] []   -  IP name
(10871)   [1] [2023-05-25 17:32:00.168] []   -  IP address
(10872)   [1] [2023-05-25 17:32:00.168] [] ENU  -  System default locale
(10883)   [1] [2023-05-25 17:32:00.168] [] MS Windows 10.0 64 Bit, Release: 22H2, Edition: Ultimate Edition"
(10884)   [1] [2023-05-25 17:32:00.168] [] 
(11340)   [3] [2023-05-25 17:32:07.443] []       Prog: Request failed (Method Post). No connection to server could be established. Line: 1918
(11343)   [3] [2023-05-25 17:32:07.443] []       Server (10.10.10.252) unreachable. Could not resolve FQDN to valid IP-Address.
(11348)   [3] [2023-05-25 17:32:07.443] []       Prog: Request failed (Method Post). No connection to server could be established. Line: 1918
(11351)   [3] [2023-05-25 17:32:07.443] []       Server (10.10.10.252) unreachable. Could not resolve FQDN to valid IP-Address.
(11352)   [3] [2023-05-25 17:32:07.443] []       Error: Server (10.10.10.252) unreachable. Could not resolve FQDN to valid IP-Address.

Das sagt er auch bei den anderen Rechnern die installieren.

getent hosts $(hostname -f) löst aber richtig auf:
10.10.10.252 servername.domain.tld servername

test -e /etc/default/locale && echo "ok" || (echo "Check locales:" && locale)
ok

Nachtrag: Auf den PCs war eine CMD offen mit specified Patch not found der auf C:/opsi deutete