opsi-client-agent 4.2.0.14 lässt sich nicht installieren

[ReneK]

Hallo zusammen,

ich habe leider folgendes Problem und komme nicht weiter:
Wir haben unseren OPSI-Server von 4.1 auf 4.2 migriert. Alles ohne Probleme.
Danach die Pakete wie angegebene aus repo 4.2 aktualisiert.
Wenn ich einen vorhandenen Client, auf dem der alte Agent mit Version 4.1.1.47 ausgeführt wird, auf die neue Version 4.20.14 per Push, also OnDemand aktualisiere, läuft die Installation ohne Probleme durch.
Wenn ich aber auf einem frischen Windows 10 Client den oca 4.20.14 per silent-setup.cmd installieren möchte, schlägt die Installation fehl.
"Installation of opsi-client-agent on client xy.domain.de unsuccessful.
Anbei auch mal das Log, indem erkennbar ist, dass scheinbar ospiclientd nicht korrekt installiert wurde.
Das Problem besteht auch mit der Version 4.2.0.16-1 aus dem experimental-Zweig.
Hat jemand eine Idee, woran es scheitert?
Vielen Dank schonmal...

opsi-client-agent.log

(195.79 KiB) 218-mal heruntergeladen

[j.schneider]

Ich tippe mal auf einen Virenscanner.
Ist da vielleicht irgendwas zu sehen?

[ReneK]

Leider nicht! Symantec EP läuft zwar, aber da wird nichts geblockt.
Auch in AppLocker ist alles frei.
Gerade nochmal getestet:
Installation auf blanken Windows 10 Rechner des OCA Vers. 4.1.1.47-1 und danach setup per OPSI auf 4.20.14-1 oder auch 4.20.16-1 ohne Probleme.
Aber eine direkte Installation auf ein blankes Windows 10 der beiden neueren Versionen läuft auf den genannten Fehler...

[j.schneider]

Bitte nochmal in die Windows-Ereignisanzeige schauen.
Ist da vielleicht noch was zu sehen?

[ReneK]

Tatsache:
Name der fehlerhaften Anwendung: opsiclientd.exe, Version: 4.2.0.98, Zeitstempel: 0x6077dc99
Name des fehlerhaften Moduls: ucrtbase.dll, Version: 10.0.19041.789, Zeitstempel: 0x82dc99a2
Ausnahmecode: 0xc0000409
Fehleroffset: 0x0009eddb
ID des fehlerhaften Prozesses: 0x2fac
Startzeit der fehlerhaften Anwendung: 0x01d7e835f8ccf250
Pfad der fehlerhaften Anwendung: C:\Program Files (x86)\opsi.org\opsi-client-agent\opsiclientd_bin\opsiclientd.exe
Pfad des fehlerhaften Moduls: C:\Windows\System32\ucrtbase.dll
Berichtskennung: c065c93d-d9f7-4a4b-b8b7-38d0df634bde
Vollständiger Name des fehlerhaften Pakets:
Anwendungs-ID, die relativ zum fehlerhaften Paket ist:

[j.schneider]

Könnte etwas mit vcredist zu tun haben.
Die Installation von vcredist im Rahmen des opsi-client-agents wird nicht durchgeführt:

Code: Alles auswählen

ShellCall Executing: "C:\Windows\system32\\cmd.exe" /C ""C:\Users\yg40mz3\AppData\Local\Temp\oca-installation-helper-tmp\files\vcredist2015\vc_redist.x64.exe" /install /passive /norestart"
[6] [2021-12-03 08:59:52.435] [opsi-client-agent]   ExitCode 1638

Fehler 1638 "eine andere Version des Programms ist bereits installiert"

[ReneK]

Vielen Dank!
Ich habe testweise mal den Part Sub_install_vcredist auskommentiert. Damit komme ich schon ein wenig weiter. Es scheitert aber dennoch:
Im Log sehe ich dann folgendes, aber ein Problem erschließt sich mir nicht (Error: opsiclientd setup failed):

Code: Alles auswählen

5] [2021-12-08 10:38:17.178] [opsi-client-agent] comment: Run opsiclientd setup
[6] [2021-12-08 10:38:17.179] [opsi-client-agent] DisableWow64FsRedirection succeeded
[5] [2021-12-08 10:38:17.179] [opsi-client-agent] ShellCall Executing: "C:\Windows\system32\\cmd.exe" /C ""C:\Program Files (x86)\opsi.org\opsi-client-agent\opsiclientd_bin\opsiclientd.exe" setup --client-id "fw07j8dm.pb.rz.in.gad.de" --service-address "https://SERVER.sd4116.gad.de:4447" --service-username "fw07j8dm.pb.rz.in.gad.de" --service-password "***(confidential)***""
[6] [2021-12-08 10:38:23.345] [opsi-client-agent] ExitCode 1
[7] [2021-12-08 10:38:23.345] [opsi-client-agent] output:
[7] [2021-12-08 10:38:23.345] [opsi-client-agent] --------------
[7] [2021-12-08 10:38:23.345] [opsi-client-agent] [5] [2021-12-08 10:38:19.203] [                                        ] Running opsiclientd setup   (setup.py:357)
[7] [2021-12-08 10:38:23.346] [opsi-client-agent] [5] [2021-12-08 10:38:19.203] [                                        ] Trying to read config from file: 'C:\Program Files (x86)\opsi.org\opsi-client-agent\opsiclientd\opsiclientd.conf'   (Config.py:475)
[7] [2021-12-08 10:38:23.346] [opsi-client-agent] [4] [2021-12-08 10:38:19.209] [                                        ] Refusing to set empty value config global.host_id   (Config.py:368)
[7] [2021-12-08 10:38:23.346] [opsi-client-agent] [4] [2021-12-08 10:38:19.209] [                                        ] Refusing to set empty value config global.opsi_host_key   (Config.py:368)
[7] [2021-12-08 10:38:23.346] [opsi-client-agent] [4] [2021-12-08 10:38:19.210] [                                        ] Refusing to set empty value config config_service.url   (Config.py:368)
[7] [2021-12-08 10:38:23.346] [opsi-client-agent] [4] [2021-12-08 10:38:19.210] [                                        ] Refusing to set empty value config depot_server.depot_id   (Config.py:368)
[7] [2021-12-08 10:38:23.346] [opsi-client-agent] [4] [2021-12-08 10:38:19.210] [                                        ] Refusing to set empty value config depot_server.url   (Config.py:368)
[7] [2021-12-08 10:38:23.346] [opsi-client-agent] [4] [2021-12-08 10:38:19.210] [                                        ] Refusing to set empty value config depot_server.drive   (Config.py:368)
[7] [2021-12-08 10:38:23.346] [opsi-client-agent] [4] [2021-12-08 10:38:19.212] [                                        ] Refusing to set empty value config event_default.depot_protocol   (Config.py:368)
[7] [2021-12-08 10:38:23.346] [opsi-client-agent] [4] [2021-12-08 10:38:19.217] [                                        ] Refusing to set empty value config depot_server.master_depot_id   (Config.py:368)
[7] [2021-12-08 10:38:23.346] [opsi-client-agent] [5] [2021-12-08 10:38:19.217] [                                        ] Config read   (Config.py:501)
[7] [2021-12-08 10:38:23.346] [opsi-client-agent] [5] [2021-12-08 10:38:19.219] [                                        ] Connecting to 'https://yg40m01f.sd4116.gad.de:4447' as 'fw07j8dm.pb.rz.in.gad.de'   (setup.py:262)
[7] [2021-12-08 10:38:23.346] [opsi-client-agent] [5] [2021-12-08 10:38:19.495] [                                        ] Getting config from service   (Config.py:784)
[7] [2021-12-08 10:38:23.347] [opsi-client-agent] [5] [2021-12-08 10:38:19.537] [                                        ] Got config from service   (Config.py:833)
[7] [2021-12-08 10:38:23.347] [opsi-client-agent] [5] [2021-12-08 10:38:19.553] [                                        ] Config file 'C:\Program Files (x86)\opsi.org\opsi-client-agent\opsiclientd\opsiclientd.conf' written   (Config.py:568)
[7] [2021-12-08 10:38:23.347] [opsi-client-agent] [5] [2021-12-08 10:38:19.575] [                                        ] Installing windows service   (setup.py:205)
[7] [2021-12-08 10:38:23.347] [opsi-client-agent] [5] [2021-12-08 10:38:19.622] [                                        ] Fetching tls server certificate from config service   (setup.py:92)
[7] [2021-12-08 10:38:23.347] [opsi-client-agent] [5] [2021-12-08 10:38:19.622] [                                        ] Trying to read config from file: 'C:\Program Files (x86)\opsi.org\opsi-client-agent\opsiclientd\opsiclientd.conf'   (Config.py:475)
[7] [2021-12-08 10:38:23.347] [opsi-client-agent] [4] [2021-12-08 10:38:19.631] [                                        ] Refusing to set empty value config depot_server.url   (Config.py:368)
[7] [2021-12-08 10:38:23.347] [opsi-client-agent] [4] [2021-12-08 10:38:19.631] [                                        ] Refusing to set empty value config depot_server.master_depot_id   (Config.py:368)
[7] [2021-12-08 10:38:23.347] [opsi-client-agent] [5] [2021-12-08 10:38:19.639] [                                        ] Config read   (Config.py:501)
[7] [2021-12-08 10:38:23.347] [opsi-client-agent] [5] [2021-12-08 10:38:22.328] [                                        ] Configure Windows firewall   (setup.py:181)
[7] [2021-12-08 10:38:23.347] [opsi-client-agent] 
[7] [2021-12-08 10:38:23.347] [opsi-client-agent] 1 Regel(n) wurde(n) gelöscht.
[7] [2021-12-08 10:38:23.347] [opsi-client-agent] OK.
[7] [2021-12-08 10:38:23.347] [opsi-client-agent] 
[7] [2021-12-08 10:38:23.348] [opsi-client-agent] OK.
[7] [2021-12-08 10:38:23.348] [opsi-client-agent] 
[7] [2021-12-08 10:38:23.348] [opsi-client-agent] Installing service opsiclientd
[7] [2021-12-08 10:38:23.348] [opsi-client-agent] Changing service configuration
[7] [2021-12-08 10:38:23.348] [opsi-client-agent] Service updated
[7] [2021-12-08 10:38:23.348] [opsi-client-agent] 
[6] [2021-12-08 10:38:23.348] [opsi-client-agent] RevertWow64FsRedirection succeeded
[6] [2021-12-08 10:38:23.348] [opsi-client-agent] If
[7] [2021-12-08 10:38:23.353] [opsi-client-agent]   GetLastExitcode = "0"   <<< result false
[6] [2021-12-08 10:38:23.353] [opsi-client-agent]   not(GetLastExitcode = "0")   <<< result true
[6] [2021-12-08 10:38:23.353] [opsi-client-agent] Then
[3] [2021-12-08 10:38:23.354] [opsi-client-agent]   Error: opsiclientd setup failed
[2] [2021-12-08 10:38:23.355] [opsi-client-agent]   Error level set to fatal
[6] [2021-12-08 10:38:23.355] [opsi-client-agent]   Process aborted
[6] [2021-12-08 10:38:23.356] [opsi-client-agent] 
[6] [2021-12-08 10:38:23.356] [opsi-client-agent] ~~~~~~~ End Sub   ~~~~~~~  Sub_install_opsiclientd
[6] [2021-12-08 10:38:23.356] [opsi-client-agent] 
[6] [2021-12-08 10:38:23.356] [opsi-client-agent] Process aborted
[1] [2021-12-08 10:38:23.356] [opsi-client-agent] ___________________
[1] [2021-12-08 10:38:23.356] [opsi-client-agent] script finished: failed
[1] [2021-12-08 10:38:23.356] [opsi-client-agent] 1 error
[1] [2021-12-08 10:38:23.356] [opsi-client-agent] 0 warnings
[1] [2021-12-08 10:38:23.356] [opsi-client-agent] 
[1] [2021-12-08 10:38:23.356] [opsi-client-agent] installed product: opsi-client-agent Version: 4.2.0.16-1

[ReneK]

Ergänzung:
Ich habe im setup.opsiscript nun mal die folgenden Variablen durch harte Werte ergänzt.

Code: Alles auswählen

	comment "Run opsiclientd setup"
ShellCall('"'+ $BaseDir$ + '\opsiclientd_bin\opsiclientd.exe" setup --client-id "' + $ClientId$ + '" --service-address "' + SERVER.sd4116.gad.de + '" --service-username "' + adminuser + '" --service-password "' + passworddesusers + '"')

Damit läuft die Installation sauber durch.
Was ich nicht verstehe: Das Problem müssen ja auch andere haben...

[NorbertKoch]

Hallo Rene,

ich denke, mein hier gepostetes Problem: viewtopic.php?p=54994 zielt in die selbe Richtung. Ein Passwort im Klartext in ein Script zu schreiben ist für mich jedoch keine Option - zumal es ja früher auch lief.

Die Frage: Was ist jetzt anders?

[ReneK]

Hallo zusammen,

ich hänge leider immer noch am selben Problem.
Wir sind nun auf der OCA Version 4.2.0.20-2. Die Installation per läuft oca-installation-helper.exe läuft einwandfrei durch, aber nur, weil ich die folgende Prüfung "ausgeschaltet" also auskommentiert habe:

Code: Alles auswählen

ShellCall('"'+ $BaseDir$ + '\opsiclientd_bin\opsiclientd.exe" setup --client-id "' + $ClientId$ + '" --service-address "' + $ServiceAddress$ + '" --service-username "' + $ServiceUsername$ + '" --service-password "' + $ServicePassword$ + '"')
	;if not(GetLastExitcode = "0")
	;	LogError "opsiclientd setup failed"
	;	IsFatalError "opsiclientd setup failed"
	;endif

Die Installation läuft einwandfrei. Was er da für Probleme hat, erschließt sich mir nicht.
Anbei noch das Log, bei dem der Fehler mit dem opsiclientd_install auftritt:

Code: Alles auswählen

(1111)    [5] [2022-02-10 12:47:13.427] [opsi-client-agent] comment: Patch opsiclientd.conf
(1112)    [5] [2022-02-10 12:47:13.427] [opsi-client-agent] Execution of: Patches_opsiclientd_conf $BaseDir$ + "\opsiclientd\opsiclientd.conf"
(1113)    [5] [2022-02-10 12:47:13.427] [opsi-client-agent] 
(1114)    [6] [2022-02-10 12:47:13.427] [opsi-client-agent] 
(1115)    [6] [2022-02-10 12:47:13.427] [opsi-client-agent] Patching: C:\Program Files (x86)\opsi.org\opsi-client-agent\opsiclientd\opsiclientd.conf
(1116)    [7] [2022-02-10 12:47:13.428] [opsi-client-agent]   Load from file with encoding: system
(1117)    [6] [2022-02-10 12:47:13.428] [opsi-client-agent]   setEntry [global] log_level = 6
(1118)    [6] [2022-02-10 12:47:13.428] [opsi-client-agent]     Entry      log_level = 5
(1119)    [6] [2022-02-10 12:47:13.428] [opsi-client-agent]     changed to log_level = 6
(1120)    [6] [2022-02-10 12:47:13.428] [opsi-client-agent]   setEntry [action_processor] local_dir = %global.base_dir%\\opsi-script
(1121)    [6] [2022-02-10 12:47:13.429] [opsi-client-agent]     Entry      local_dir = %global.base_dir%\\opsi-winst
(1122)    [6] [2022-02-10 12:47:13.429] [opsi-client-agent]     changed to local_dir = %global.base_dir%\\opsi-script
(1123)    [6] [2022-02-10 12:47:13.429] [opsi-client-agent]   setEntry [action_processor] remote_dir = opsi-script\\windows\\x86
(1124)    [6] [2022-02-10 12:47:13.429] [opsi-client-agent]     Entry      remote_dir = opsi-winst\\files\\opsi-winst
(1125)    [6] [2022-02-10 12:47:13.429] [opsi-client-agent]     changed to remote_dir = opsi-script\\windows\\x86
(1126)    [6] [2022-02-10 12:47:13.429] [opsi-client-agent]   setEntry [action_processor] remote_common_dir = opsi-script\\common
(1127)    [6] [2022-02-10 12:47:13.430] [opsi-client-agent]     Entry      remote_common_dir = ""
(1128)    [6] [2022-02-10 12:47:13.430] [opsi-client-agent]     changed to remote_common_dir = opsi-script\\common
(1129)    [6] [2022-02-10 12:47:13.430] [opsi-client-agent]   setEntry [action_processor] filename = opsi-script.exe
(1130)    [6] [2022-02-10 12:47:13.430] [opsi-client-agent]     Entry      filename = winst32.exe
(1131)    [6] [2022-02-10 12:47:13.430] [opsi-client-agent]     changed to filename = opsi-script.exe
(1132)    [6] [2022-02-10 12:47:13.430] [opsi-client-agent]   ---
(1133)    [7] [2022-02-10 12:47:13.430] [opsi-client-agent]   Save to file with encoding: system
(1134)    [5] [2022-02-10 12:47:13.433] [opsi-client-agent] comment: Run opsiclientd setup
(1135)    [6] [2022-02-10 12:47:13.434] [opsi-client-agent] DisableWow64FsRedirection succeeded
(1136)    [5] [2022-02-10 12:47:13.434] [opsi-client-agent] ShellCall Executing: "C:\Windows\system32\\cmd.exe" /C ""C:\Program Files (x86)\opsi.org\opsi-client-agent\opsiclientd_bin\opsiclientd.exe" setup --client-id "fw07j8r4.pb.rz.in.gad.de" --service-address "https://yg40m01f.sd4116.gad.de:4447" --service-username "fw07j8r4.pb.rz.in.gad.de" --service-password "***(confidential)***""
(1137)    [6] [2022-02-10 12:47:16.168] [opsi-client-agent] ExitCode 1
(1138)    [7] [2022-02-10 12:47:16.169] [opsi-client-agent] output:
(1139)    [7] [2022-02-10 12:47:16.169] [opsi-client-agent] --------------
(1140)    [7] [2022-02-10 12:47:16.169] [opsi-client-agent] "\\yg40m01f\opsi_depot\opsi-client-agent"
(1141)    [7] [2022-02-10 12:47:16.169] [opsi-client-agent] CMD.EXE wurde mit dem oben angegebenen Pfad als aktuellem Verzeichnis gestartet.
(1142)    [7] [2022-02-10 12:47:16.169] [opsi-client-agent] UNC-Pfade werden nicht unterstützt.
(1143)    [7] [2022-02-10 12:47:16.169] [opsi-client-agent] Stattdessen wird das Windows-Verzeichnis als aktuelles Verzeichnis gesetzt.
(1144)    [7] [2022-02-10 12:47:16.169] [opsi-client-agent] [5] [2022-02-10 12:47:15.149] [                                        ] Running opsiclientd setup   (setup.py:357)
(1145)    [7] [2022-02-10 12:47:16.169] [opsi-client-agent] [5] [2022-02-10 12:47:15.149] [                                        ] Trying to read config from file: 'C:\Program Files (x86)\opsi.org\opsi-client-agent\opsiclientd\opsiclientd.conf'   (Config.py:492)
(1146)    [7] [2022-02-10 12:47:16.169] [opsi-client-agent] [4] [2022-02-10 12:47:15.155] [                                        ] Refusing to set empty value config global.host_id   (Config.py:385)
(1147)    [7] [2022-02-10 12:47:16.171] [opsi-client-agent] [4] [2022-02-10 12:47:15.155] [                                        ] Refusing to set empty value config global.opsi_host_key   (Config.py:385)
(1148)    [7] [2022-02-10 12:47:16.171] [opsi-client-agent] [4] [2022-02-10 12:47:15.156] [                                        ] Refusing to set empty value config config_service.url   (Config.py:385)
(1149)    [7] [2022-02-10 12:47:16.171] [opsi-client-agent] [4] [2022-02-10 12:47:15.156] [                                        ] Refusing to set empty value config depot_server.depot_id   (Config.py:385)
(1150)    [7] [2022-02-10 12:47:16.171] [opsi-client-agent] [4] [2022-02-10 12:47:15.156] [                                        ] Refusing to set empty value config depot_server.url   (Config.py:385)
(1151)    [7] [2022-02-10 12:47:16.171] [opsi-client-agent] [4] [2022-02-10 12:47:15.156] [                                        ] Refusing to set empty value config depot_server.drive   (Config.py:385)
(1152)    [7] [2022-02-10 12:47:16.171] [opsi-client-agent] [4] [2022-02-10 12:47:15.159] [                                        ] Refusing to set empty value config event_default.depot_protocol   (Config.py:385)
(1153)    [7] [2022-02-10 12:47:16.171] [opsi-client-agent] [4] [2022-02-10 12:47:15.165] [                                        ] Refusing to set empty value config depot_server.master_depot_id   (Config.py:385)
(1154)    [7] [2022-02-10 12:47:16.171] [opsi-client-agent] [5] [2022-02-10 12:47:15.165] [                                        ] Config read   (Config.py:518)
(1155)    [7] [2022-02-10 12:47:16.171] [opsi-client-agent] [5] [2022-02-10 12:47:15.167] [                                        ] Connecting to 'https://yg40m01f.sd4116.gad.de:4447' as 'fw07j8r4.pb.rz.in.gad.de'   (setup.py:262)
(1156)    [7] [2022-02-10 12:47:16.171] [opsi-client-agent] [5] [2022-02-10 12:47:15.467] [                                        ] Getting config from service   (Config.py:801)
(1157)    [7] [2022-02-10 12:47:16.171] [opsi-client-agent] [5] [2022-02-10 12:47:15.544] [                                        ] Got config from service   (Config.py:850)
(1158)    [7] [2022-02-10 12:47:16.171] [opsi-client-agent] [5] [2022-02-10 12:47:15.566] [                                        ] Config file 'C:\Program Files (x86)\opsi.org\opsi-client-agent\opsiclientd\opsiclientd.conf' written   (Config.py:585)
(1159)    [7] [2022-02-10 12:47:16.172] [opsi-client-agent] [5] [2022-02-10 12:47:15.596] [                                        ] Installing windows service   (setup.py:205)
(1160)    [7] [2022-02-10 12:47:16.172] [opsi-client-agent] [5] [2022-02-10 12:47:15.643] [                                        ] Configure Windows firewall   (setup.py:181)
(1161)    [7] [2022-02-10 12:47:16.172] [opsi-client-agent] 
(1162)    [7] [2022-02-10 12:47:16.172] [opsi-client-agent] 1 Regel(n) wurde(n) gelöscht.
(1163)    [7] [2022-02-10 12:47:16.172] [opsi-client-agent] OK.
(1164)    [7] [2022-02-10 12:47:16.172] [opsi-client-agent] 
(1165)    [7] [2022-02-10 12:47:16.172] [opsi-client-agent] OK.
(1166)    [7] [2022-02-10 12:47:16.172] [opsi-client-agent] 
(1167)    [7] [2022-02-10 12:47:16.172] [opsi-client-agent] [5] [2022-02-10 12:47:16.036] [                                        ] Creating opsi shutdown install policy   (setup.py:290)
(1168)    [7] [2022-02-10 12:47:16.172] [opsi-client-agent] [5] [2022-02-10 12:47:16.048] [                                        ] Setup completed with 0 errors   (setup.py:386)
(1169)    [7] [2022-02-10 12:47:16.172] [opsi-client-agent] Installing service opsiclientd
(1170)    [7] [2022-02-10 12:47:16.172] [opsi-client-agent] Changing service configuration
(1171)    [7] [2022-02-10 12:47:16.172] [opsi-client-agent] Service updated
(1172)    [7] [2022-02-10 12:47:16.172] [opsi-client-agent] 
(1173)    [6] [2022-02-10 12:47:16.172] [opsi-client-agent] RevertWow64FsRedirection succeeded
(1174)    [6] [2022-02-10 12:47:16.173] [opsi-client-agent] If
(1175)    [7] [2022-02-10 12:47:16.178] [opsi-client-agent]   GetLastExitcode = "0"   <<< result false
(1176)    [6] [2022-02-10 12:47:16.178] [opsi-client-agent]   not(GetLastExitcode = "0")   <<< result true
(1177)    [6] [2022-02-10 12:47:16.178] [opsi-client-agent] Then
(1178)    [3] [2022-02-10 12:47:16.179] [opsi-client-agent]   Error: opsiclientd setup failed
(1179)    [2] [2022-02-10 12:47:16.180] [opsi-client-agent]   Error level set to fatal
(1180)    [6] [2022-02-10 12:47:16.180] [opsi-client-agent]   Process aborted
(1181)    [6] [2022-02-10 12:47:16.180] [opsi-client-agent] 
(1182)    [6] [2022-02-10 12:47:16.180] [opsi-client-agent] ~~~~~~~ End Sub   ~~~~~~~  Sub_install_opsiclientd
(1183)    [6] [2022-02-10 12:47:16.180] [opsi-client-agent] 
(1184)    [6] [2022-02-10 12:47:16.181] [opsi-client-agent] Process aborted
(1185)    [1] [2022-02-10 12:47:16.181] [opsi-client-agent] ___________________
(1186)    [1] [2022-02-10 12:47:16.181] [opsi-client-agent] script finished: failed
(1187)    [1] [2022-02-10 12:47:16.181] [opsi-client-agent] 1 error

Vielen Dank schonmal für die Hilfe und viele Grüße!