[Gelöst] opsi-deploy-client-agent -> Winexe schlägt fehl

[Sapgui]

Hallo!

Erstmal, ich bin neu beim Thema OPSI und bin momentan dabei, OPSI per opsi-deploy-client-agent auf ca. 200 WinXP_SP3 Clients auszurollen. Als Server ist ein Ubuntu 12.04.1 LTS im Einsatz.
Mein Problem sieht nun wie folgt aus:

Wenn ich

Code: Alles auswählen

root@[server]:/opt/pcbin/install/opsi-client-agent/opsi-deploy-client-agent -v -u "Domainadmin" -p "passwort" -f "liste_der_clients.txt" -S

ausführe, dann funktioniert das Skript auf ca. der Hälfte der Clients einwandfrei.
Bei der anderen Hälfte erhalte ich folgenden Fehler:

Code: Alles auswählen

[notice] Starting deployment to host 'rbw-pc06-960.oead.local'
[notice] Querying for ip address of host 'rbw-pc06-960.oead.local'
[notice] Got ip address '10.12.16.130' from syscall
[notice] Pinging host 10.12.16.130 ...
[notice] Host 10.12.16.130 is up
[notice] Getting hardware ethernet address of host 'rbw-pc06-960.oead.local'
[notice] Found hardware ethernet address '00:22:19:20:04:65'
[notice] Creating client 'rbw-pc06-960.oead.local'
[notice] Testing winexe
[error] Deployment to 'rbw-pc06-960.oead.local' failed: Failed to execute command on host 'rbw-pc06-960': winexe error: Command './winexe -U 'oead/Administrator%*** confidential ***' //rbw-pc06-960 'cmd.exe /C "del /s /q c:\tmp\opsi-client-agent_inst && rmdir /s /q c:\tmp\opsi-client-agent_inst || echo not found"'' failed (1):
dos charset 'CP850' unavailable - using ASCII
ERROR: Failed to open connection - NT_STATUS_UNEXPECTED_NETWORK_ERROR

Hat vielleicht jemand eine Idee, warum ich diese Fehlermeldung erhalte?
Habe im Forum auch noch nix zu "NT_STATUS_UNEXPECTED_NETWORK_ERROR" gefunden.


Achja, an der WindowsFirewall auf den Clients liegt es zu 99% nicht. Diese ist auf einem Teil der Clients aktiv - allerdings tritt der Fehler auch auf Clients auf, die die Firewall nicht aktiv haben.
Weiters kann ich auf den betroffenen Clients den opsi-client auch nicht per service_setup.cmd installieren. Hier werden die 411 (oder 412?) Dateien kopiert und der Installer ausgeführt. Allerdings bleibt der Installer direkt hängen und verlangt Logindaten für den opsi-depot server. Gebe ich diese ein, dauert es gefühlte 30 Sekunden und das Login-Feld erscheint erneut.
-----
Ajo, da habe ich ja gleich noch eine 2te Frage: gibt es eine Möglichkeit, dass "OPSI-Paket" base-win-config (o.Ä.) wieder "deinstallieren" zu lassen? Also zu verhindern, dass die Änderungen in der Registry vorgenommen werden ... ? Hier gibt es leider keine Funktion "not_installed"...

Danke für jede Hilfe!

[d.oertel]

Hi,

poste doch mal von einem Client auf dem die service_setup.cmd nicht geht die c:\tmp\opsi-client-agent.log

Zum Paket win-config-base gibt es kein uninstall. Du kannst Die Auswirkungen teilweise über die Properties zurückschalten.

gruss
d.oertel

[Sapgui]

Hallo,

danke für die Info bezüglich dem config-win-base!
Die Log-Datei kann ich zwecks "Das Kontingent für Dateianhänge ist bereits vollständig ausgenutzt." nicht anhängen.

Aber ich poste den Inhalt mal einfach so:

Code: Alles auswählen

[1] [17.09.2012 08:14:19] opsi-winst 4.11.2.9 started at >>17.09.2012 08:14:19
[1] [17.09.2012 08:14:19] startmessage winst created at CentralForm.FormCreate: 17.09.2012 08:14:19
[1] [17.09.2012 08:14:19] startmessage StartProgramModes and create log: 17.09.2012 08:14:19
[1] [17.09.2012 08:14:19] 
[1] [17.09.2012 08:14:19] ============ Version 4.11.2.9 WIN32 script "c:\tmp\opsi\setup.ins"
[1] [17.09.2012 08:14:19]              start: 2012-09-17  08:14:19 
[1] [17.09.2012 08:14:19]              on client named    "BSP-PC13-8200"
[1] [17.09.2012 08:14:19]              loggedin user    "administrator"
[1] [17.09.2012 08:14:19]              winst running as    "administrator"
[1] [17.09.2012 08:14:19]              winst running with admin privileges
[1] [17.09.2012 08:14:19]              winst running in standard script mode
[1] [17.09.2012 08:14:19] [executing: "c:\tmp\opsi\opsi-winst\winst32.exe"]
[1] [17.09.2012 08:14:19] system infos:
[1] [17.09.2012 08:14:19] 2C-41-38-9E-D0-93  -  PC hardware address
[1] [17.09.2012 08:14:19] BSP-PC13-8200.OEAD.local  -  IP name 
[1] [17.09.2012 08:14:19] 10.12.16.194  -  IP address
[1] [17.09.2012 08:14:19] DEA  -  System default locale 
[1] [17.09.2012 08:14:19] MS Windowds 5.1 32 Bit
[1] [17.09.2012 08:14:19] 
[6] [17.09.2012 08:14:19] Registry key [HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion]  opened
[6] [17.09.2012 08:14:19] Key closed
[6] [17.09.2012 08:14:19] wInst has version  4.11.2.9, required is : >= 4.10.8.12
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] Set  $INST_Debug$ = "off"
[6] [17.09.2012 08:14:19]   The value of the variable "$INST_Debug$" is now: "off"
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] Set  $INST_AktGina$ = ""
[6] [17.09.2012 08:14:19]   The value of the variable "$INST_AktGina$" is now: ""
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] Set  $INST_service_hidden_password$ =""
[6] [17.09.2012 08:14:19]   The value of the variable "$INST_service_hidden_password$" is now: ""
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] Set  $INST_AllowReboot$ = "true"
[6] [17.09.2012 08:14:19]   The value of the variable "$INST_AllowReboot$" is now: "true"
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] Set  $INST_BaseDir$   = "C:\Programme\opsi.org\opsi-client-agent"
[6] [17.09.2012 08:14:19]   The value of the variable "$INST_BaseDir$" is now: "C:\Programme\opsi.org\opsi-client-agent"
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] Set  $INST_OpsiclientdDir$   = $INST_BaseDir$+"\opsiclientd"
[6] [17.09.2012 08:14:19]   The value of the variable "$INST_OpsiclientdDir$" is now: "C:\Programme\opsi.org\opsi-client-agent\opsiclientd"
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] Set  $INST_OpsiUtilitiesdDir$   = $INST_BaseDir$+"\utilities"
[6] [17.09.2012 08:14:19]   The value of the variable "$INST_OpsiUtilitiesdDir$" is now: "C:\Programme\opsi.org\opsi-client-agent\utilities"
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] Set  $INST_Cfgini$ = "C:\tmp\opsi\cfg\config.ini"
[6] [17.09.2012 08:14:19]   The value of the variable "$INST_Cfgini$" is now: "C:\tmp\opsi\cfg\config.ini"
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] Set  $INST_DepotServer$ = ""
[6] [17.09.2012 08:14:19]   The value of the variable "$INST_DepotServer$" is now: ""
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] Set  $INST_IPAddress$ = ""
[6] [17.09.2012 08:14:19]   The value of the variable "$INST_IPAddress$" is now: ""
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] Set  $INST_ImmediateRebootFlag$ = ""
[6] [17.09.2012 08:14:19]   The value of the variable "$INST_ImmediateRebootFlag$" is now: ""
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] Set  $INST_MAC$ = ""
[6] [17.09.2012 08:14:19]   The value of the variable "$INST_MAC$" is now: ""
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] Set  $INST_NetBootProductname$ = ""
[6] [17.09.2012 08:14:19]   The value of the variable "$INST_NetBootProductname$" is now: ""
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] Set  $INST_NicIndex$ = ""
[6] [17.09.2012 08:14:19]   The value of the variable "$INST_NicIndex$" is now: ""
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] Set  $INST_NotifierDir$ = $INST_BaseDir$+"\notifier"
[6] [17.09.2012 08:14:19]   The value of the variable "$INST_NotifierDir$" is now: "C:\Programme\opsi.org\opsi-client-agent\notifier"
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] Set  $INST_OpensslConfigFile$ = "c:\tmp\opsiclientd.cnf"
[6] [17.09.2012 08:14:19]   The value of the variable "$INST_OpensslConfigFile$" is now: "c:\tmp\opsiclientd.cnf"
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] Set  $INST_OpsiclientdCertificateFile$ = $INST_OpsiclientdDir$+"\opsiclientd.pem"
[6] [17.09.2012 08:14:19]   The value of the variable "$INST_OpsiclientdCertificateFile$" is now: "C:\Programme\opsi.org\opsi-client-agent\opsiclientd\opsiclientd.pem"
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] Set  $INST_OpsiclientdConf$ = $INST_OpsiclientdDir$+"\opsiclientd.conf"
[6] [17.09.2012 08:14:19]   The value of the variable "$INST_OpsiclientdConf$" is now: "C:\Programme\opsi.org\opsi-client-agent\opsiclientd\opsiclientd.conf"
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] Set  $INST_OpsiclientdRPCDir$ = $INST_BaseDir$+"\opsiclientd_rpc"
[6] [17.09.2012 08:14:19]   The value of the variable "$INST_OpsiclientdRPCDir$" is now: "C:\Programme\opsi.org\opsi-client-agent\opsiclientd_rpc"
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] Set  $INST_ActionProcessorStarterDir$ = $INST_BaseDir$+"\action_processor_starter"
[6] [17.09.2012 08:14:19]   The value of the variable "$INST_ActionProcessorStarterDir$" is now: "C:\Programme\opsi.org\opsi-client-agent\action_processor_starter"
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] Set  $INST_Pcname$ = EnvVar ("COMPUTERNAME")
[6] [17.09.2012 08:14:19]   The value of the variable "$INST_Pcname$" is now: "BSP-PC13-8200"
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] Set  $INST_RebootFlag$ = ""
[6] [17.09.2012 08:14:19]   The value of the variable "$INST_RebootFlag$" is now: ""
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] Set  $INST_Service_Password$ = "pcpatch"
[6] [17.09.2012 08:14:19]   The value of the variable "$INST_Service_Password$" is now: "pcpatch"
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] Set  $INST_Service_User$ = "pcpatch"
[6] [17.09.2012 08:14:19]   The value of the variable "$INST_Service_User$" is now: "pcpatch"
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] Set  $INST_SetAclDir$ = $INST_OpsiUtilitiesdDir$
[6] [17.09.2012 08:14:19]   The value of the variable "$INST_SetAclDir$" is now: "C:\Programme\opsi.org\opsi-client-agent\utilities"
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] Set  $INST_Sysconfini$ = "C:\tmp\opsi\cfg\sysconf.ini"
[6] [17.09.2012 08:14:19]   The value of the variable "$INST_Sysconfini$" is now: "C:\tmp\opsi\cfg\sysconf.ini"
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] Set  $INST_SystemType$ = GetSystemType
[6] [17.09.2012 08:14:19]   The value of the variable "$INST_SystemType$" is now: "x86 System"
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] Set  $INST_WinstDir$   = $INST_BaseDir$+"\opsi-winst"
[6] [17.09.2012 08:14:19]   The value of the variable "$INST_WinstDir$" is now: "C:\Programme\opsi.org\opsi-client-agent\opsi-winst"
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] Set  $INST_WinstRegKey$ = "HKLM\SOFTWARE\opsi.org\winst"
[6] [17.09.2012 08:14:19]   The value of the variable "$INST_WinstRegKey$" is now: "HKLM\SOFTWARE\opsi.org\winst"
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] Set  $INST_gina_to_chain$ = "msgina.dll"
[6] [17.09.2012 08:14:19]   The value of the variable "$INST_gina_to_chain$" is now: "msgina.dll"
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] Set  $INST_preloginvistaInstalled$ = 'false'
[6] [17.09.2012 08:14:19]   The value of the variable "$INST_preloginvistaInstalled$" is now: "false"
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] Set  $INST_preloginloaderInstalled$ = 'false'
[6] [17.09.2012 08:14:19]   The value of the variable "$INST_preloginloaderInstalled$" is now: "false"
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] If
[5] [17.09.2012 08:14:19]   $INST_debug$ = "off"   <<< result true
[5] [17.09.2012 08:14:19] Then
[5] [17.09.2012 08:14:19]   
[5] [17.09.2012 08:14:19]   Set  $INST_DefaultLoglevel$ = "7"
[6] [17.09.2012 08:14:19]     The value of the variable "$INST_DefaultLoglevel$" is now: "7"
[5] [17.09.2012 08:14:19]   
[5] [17.09.2012 08:14:19]   Set  $INST_PasswdLogLevel$="7"
[6] [17.09.2012 08:14:19]     The value of the variable "$INST_PasswdLogLevel$" is now: "7"
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] Else
[5] [17.09.2012 08:14:19] EndIf
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] Set  $ProductVersion$ = ""
[6] [17.09.2012 08:14:19]   The value of the variable "$ProductVersion$" is now: ""
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] Set  $OCD_OpsiVarDir$ = "c:\opsi.org"
[6] [17.09.2012 08:14:19]   The value of the variable "$OCD_OpsiVarDir$" is now: "c:\opsi.org"
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] Set  $INST_uac_level$ = "2"
[6] [17.09.2012 08:14:19]   The value of the variable "$INST_uac_level$" is now: "2"
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] Set  $INST_create_software_on_demand_menue_entry$ = "true"
[6] [17.09.2012 08:14:19]   The value of the variable "$INST_create_software_on_demand_menue_entry$" is now: "true"
[1] [17.09.2012 08:14:19] LogLevel was 6
[1] [17.09.2012 08:14:19] LogLevel set to 7
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] Set  $GEN_bootmode$    = "BKSTD"
[6] [17.09.2012 08:14:19]   The value of the variable "$GEN_bootmode$" is now: "BKSTD"
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] Set  $OCD_config_service.url$         = ""
[6] [17.09.2012 08:14:19]   The value of the variable "$OCD_config_service.url$" is now: ""
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] Set  $OCD_config_service.connection_timeout$ = "10"
[6] [17.09.2012 08:14:19]   The value of the variable "$OCD_config_service.connection_timeout$" is now: "10"
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] Set  $OLB_LoginBlockerStart$          = "1"
[6] [17.09.2012 08:14:19]   The value of the variable "$OLB_LoginBlockerStart$" is now: "1"
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] Set  $OLB_LoginBlockerTimeoutConnect$ = "120"
[6] [17.09.2012 08:14:19]   The value of the variable "$OLB_LoginBlockerTimeoutConnect$" is now: "120"
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] Set  $OLB_opsiServiceType$            = "2"
[6] [17.09.2012 08:14:19]   The value of the variable "$OLB_opsiServiceType$" is now: "2"
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] Set  $PLG_UtilsDir$ = $INST_BaseDir$+"\prelogin"
[6] [17.09.2012 08:14:19]   The value of the variable "$PLG_UtilsDir$" is now: "C:\Programme\opsi.org\opsi-client-agent\prelogin"
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] Set  $PLG_BaseDir$                    = $INST_BaseDir$
[6] [17.09.2012 08:14:19]   The value of the variable "$PLG_BaseDir$" is now: "C:\Programme\opsi.org\opsi-client-agent"
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] Set  $PLG_UtilsDir$                   = $PLG_BaseDir$+"\prelogin"
[6] [17.09.2012 08:14:19]   The value of the variable "$PLG_UtilsDir$" is now: "C:\Programme\opsi.org\opsi-client-agent\prelogin"
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] Set  $PLG_CfgDir$                     = $PLG_BaseDir$+"\cfg"
[6] [17.09.2012 08:14:19]   The value of the variable "$PLG_CfgDir$" is now: "C:\Programme\opsi.org\opsi-client-agent\cfg"
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] Set  $PLG_DebugOutput$                = "0"
[6] [17.09.2012 08:14:19]   The value of the variable "$PLG_DebugOutput$" is now: "0"
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] Set  $PLG_PcptchExe$                  = $PLG_UtilsDir$+"\pcptch.exe"
[6] [17.09.2012 08:14:19]   The value of the variable "$PLG_PcptchExe$" is now: "C:\Programme\opsi.org\opsi-client-agent\prelogin\pcptch.exe"
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] Set  $PLG_RebootOnBootmodeReins$      = "1"
[6] [17.09.2012 08:14:19]   The value of the variable "$PLG_RebootOnBootmodeReins$" is now: "1"
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] Set  $PLG_RebootOnServicePackChange$  = "1"
[6] [17.09.2012 08:14:19]   The value of the variable "$PLG_RebootOnServicePackChange$" is now: "1"
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] Set  $PLG_RunWithUser$                = "0"
[6] [17.09.2012 08:14:19]   The value of the variable "$PLG_RunWithUser$" is now: "0"
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] Set  $PLG_RunWithUserDelay$           = "1000"
[6] [17.09.2012 08:14:19]   The value of the variable "$PLG_RunWithUserDelay$" is now: "1000"
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] Set  $PLG_RunWithUserPassword$        = ""
[6] [17.09.2012 08:14:19]   The value of the variable "$PLG_RunWithUserPassword$" is now: ""
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] Set  $PLG_RunWithUserReboot$          = "0"
[6] [17.09.2012 08:14:19]   The value of the variable "$PLG_RunWithUserReboot$" is now: "0"
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] Set  $PLG_RunWithUserTask$            = ""
[6] [17.09.2012 08:14:19]   The value of the variable "$PLG_RunWithUserTask$" is now: ""
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] Set  $PLG_RunWithUserTaskParms$       = ""
[6] [17.09.2012 08:14:19]   The value of the variable "$PLG_RunWithUserTaskParms$" is now: ""
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] Set  $PLG_RunWithUserUsername$        = "pcpatch"
[6] [17.09.2012 08:14:19]   The value of the variable "$PLG_RunWithUserUsername$" is now: "pcpatch"
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] Set  $PLG_WinstRegKey$                = "SOFTWARE\opsi.org\winst"
[6] [17.09.2012 08:14:19]   The value of the variable "$PLG_WinstRegKey$" is now: "SOFTWARE\opsi.org\winst"
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] Set  $PLG_RunServiceAs$               = "1"
[6] [17.09.2012 08:14:19]   The value of the variable "$PLG_RunServiceAs$" is now: "1"
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] Set  $PLG_RunServiceAsDom$            = ""
[6] [17.09.2012 08:14:19]   The value of the variable "$PLG_RunServiceAsDom$" is now: ""
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] Set  $PLG_RunServiceAsUsr$            = ""
[6] [17.09.2012 08:14:19]   The value of the variable "$PLG_RunServiceAsUsr$" is now: ""
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] Set  $PLG_RunServiceAsPas$            = ""
[6] [17.09.2012 08:14:19]   The value of the variable "$PLG_RunServiceAsPas$" is now: ""
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] Set  $SHI_pckey$       = ""
[6] [17.09.2012 08:14:19]   The value of the variable "$SHI_pckey$" is now: ""
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] Set  $SHI_pckey_file$  = $PLG_CfgDir$+"\locked.cfg"
[6] [17.09.2012 08:14:19]   The value of the variable "$SHI_pckey_file$" is now: "C:\Programme\opsi.org\opsi-client-agent\cfg\locked.cfg"
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] Set  $SHI_user$        = ""
[6] [17.09.2012 08:14:19]   The value of the variable "$SHI_user$" is now: ""
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] Set  $SHI_smbusername1$= ""
[6] [17.09.2012 08:14:19]   The value of the variable "$SHI_smbusername1$" is now: ""
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] Set  $SHI_try_secondary_user$="0"
[6] [17.09.2012 08:14:19]   The value of the variable "$SHI_try_secondary_user$" is now: "0"
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] Set  $PCP_Bitmap1$                = ""
[6] [17.09.2012 08:14:19]   The value of the variable "$PCP_Bitmap1$" is now: ""
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] Set  $PCP_Bitmap2$                = ""
[6] [17.09.2012 08:14:19]   The value of the variable "$PCP_Bitmap2$" is now: ""
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] Set  $PCP_button_stopnetworking$  = ""
[6] [17.09.2012 08:14:19]   The value of the variable "$PCP_button_stopnetworking$" is now: ""
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] Set  $PCP_copyDefaultUser$        = ""
[6] [17.09.2012 08:14:19]   The value of the variable "$PCP_copyDefaultUser$" is now: ""
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] Set  $PCP_label1$                 = ""
[6] [17.09.2012 08:14:19]   The value of the variable "$PCP_label1$" is now: ""
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] Set  $PCP_label2$                 = ""
[6] [17.09.2012 08:14:19]   The value of the variable "$PCP_label2$" is now: ""
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] Set  $PCP_loadBitmap$             = ""
[6] [17.09.2012 08:14:19]   The value of the variable "$PCP_loadBitmap$" is now: ""
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] Set  $PCP_makeLocalCopyOfIniFile$ = ""
[6] [17.09.2012 08:14:19]   The value of the variable "$PCP_makeLocalCopyOfIniFile$" is now: ""
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] Set  $PCP_makeLocalWinst$         = ""
[6] [17.09.2012 08:14:19]   The value of the variable "$PCP_makeLocalWinst$" is now: ""
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] Set  $PCP_mountdrive$             = ""
[6] [17.09.2012 08:14:19]   The value of the variable "$PCP_mountdrive$" is now: ""
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] Set  $PCP_opsiServiceURL$ 	  = ""
[6] [17.09.2012 08:14:19]   The value of the variable "$PCP_opsiServiceURL$" is now: ""
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] Set  $PCP_patchleveltyp$          = ""
[6] [17.09.2012 08:14:19]   The value of the variable "$PCP_patchleveltyp$" is now: ""
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] Set  $PCP_pcprotoname$            = ""
[6] [17.09.2012 08:14:19]   The value of the variable "$PCP_pcprotoname$" is now: ""
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] Set  $PCP_opsiServerType$ 		  = "service"
[6] [17.09.2012 08:14:19]   The value of the variable "$PCP_opsiServerType$" is now: "service"
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] Set  $PCP_winstLocalDirectory$    = $INST_WinstDir$
[6] [17.09.2012 08:14:19]   The value of the variable "$PCP_winstLocalDirectory$" is now: "C:\Programme\opsi.org\opsi-client-agent\opsi-winst"
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] Set  $PCP_SecsUntilConnectionTimeOut$ = "180"
[6] [17.09.2012 08:14:19]   The value of the variable "$PCP_SecsUntilConnectionTimeOut$" is now: "180"
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] Set  $PCP_pingcheck$		= ""
[6] [17.09.2012 08:14:19]   The value of the variable "$PCP_pingcheck$" is now: ""
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] Set  $INST_OS$ = GetOS
[6] [17.09.2012 08:14:19]   The value of the variable "$INST_OS$" is now: "Windows_NT"
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] Set  $INST_MinorOS$ = GetNTVersion
[6] [17.09.2012 08:14:19]   The value of the variable "$INST_MinorOS$" is now: "WinXP"
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] Set  $INST_NTVersion$ = GetMsVersionInfo
[6] [17.09.2012 08:14:19]   The value of the variable "$INST_NTVersion$" is now: "5.1"
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] Set  $INST_Resultlist$ = getMSVersionMap
[6] [17.09.2012 08:14:19]     retrieving strings from getMSVersionMap [switch to loglevel 7 for debugging]
[7] [17.09.2012 08:14:19]         (string   0)major_version=5
[7] [17.09.2012 08:14:19]         (string   1)minor_version=1
[7] [17.09.2012 08:14:19]         (string   2)build_number=2600
[7] [17.09.2012 08:14:19]         (string   3)platform_id=2
[7] [17.09.2012 08:14:19]         (string   4)csd_version=Service Pack 3
[7] [17.09.2012 08:14:19]         (string   5)service_pack_major=3
[7] [17.09.2012 08:14:19]         (string   6)service_pack_minor=0
[7] [17.09.2012 08:14:19]         (string   7)suite_mask=256
[7] [17.09.2012 08:14:19]         (string   8)product_type_nr=1
[7] [17.09.2012 08:14:19]         (string   9)2003r2=false
[7] [17.09.2012 08:14:19]         
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] Set  $INST_ProductType$ = getValue("product_type_nr",$INST_Resultlist$)
[6] [17.09.2012 08:14:19]     retrieving strings from $INST_Resultlist$ [switch to loglevel 7 for debugging]
[7] [17.09.2012 08:14:19]         (string   0)major_version=5
[7] [17.09.2012 08:14:19]         (string   1)minor_version=1
[7] [17.09.2012 08:14:19]         (string   2)build_number=2600
[7] [17.09.2012 08:14:19]         (string   3)platform_id=2
[7] [17.09.2012 08:14:19]         (string   4)csd_version=Service Pack 3
[7] [17.09.2012 08:14:19]         (string   5)service_pack_major=3
[7] [17.09.2012 08:14:19]         (string   6)service_pack_minor=0
[7] [17.09.2012 08:14:19]         (string   7)suite_mask=256
[7] [17.09.2012 08:14:19]         (string   8)product_type_nr=1
[7] [17.09.2012 08:14:19]         (string   9)2003r2=false
[7] [17.09.2012 08:14:19]         
[6] [17.09.2012 08:14:19]   The value of the variable "$INST_ProductType$" is now: "1"
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] Set  $INST_vcredistx86_installed$ = "false"
[6] [17.09.2012 08:14:19]   The value of the variable "$INST_vcredistx86_installed$" is now: "false"
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] If
[7] [17.09.2012 08:14:19]   Registry started with redirection (32 Bit)
[6] [17.09.2012 08:14:19]     Registry key [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\{1F1C2DFC-2D24-3E06-BCB8-725134ADF989}]  opened
[6] [17.09.2012 08:14:19]     Key closed
[5] [17.09.2012 08:14:19]   GetRegistryStringValue("[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\{1F1C2DFC-2D24-3E06-BCB8-725134ADF989}] DisplayVersion") = "9.0.30729.4148"   <<< result true
[5] [17.09.2012 08:14:19] Then
[5] [17.09.2012 08:14:19]   comment: vcredistx86 Version 9.0.30729.4148 is installed
[5] [17.09.2012 08:14:19]   
[5] [17.09.2012 08:14:19]   Set  $INST_vcredistx86_installed$ = "true"
[6] [17.09.2012 08:14:19]     The value of the variable "$INST_vcredistx86_installed$" is now: "true"
[5] [17.09.2012 08:14:19] EndIf
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] If
[7] [17.09.2012 08:14:19]   Registry started with redirection (32 Bit)
[6] [17.09.2012 08:14:19]     Info: Registry key [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\{FF66E9F6-83E7-3A3E-AF14-8DE9A809A6A4}]   could not be opened by RegOpenKeyEx,  Errorno 2 "Das System kann die angegebene Datei nicht finden.
"
[5] [17.09.2012 08:14:19]   GetRegistryStringValue("[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\{FF66E9F6-83E7-3A3E-AF14-8DE9A809A6A4}] DisplayVersion") = "9.0.21022"   <<< result false
[5] [17.09.2012 08:14:19] Then
[5] [17.09.2012 08:14:19] EndIf
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] If
[5] [17.09.2012 08:14:19]   $INST_NTVersion$ <= "4"   <<< result false
[5] [17.09.2012 08:14:19] Then
[5] [17.09.2012 08:14:19] EndIf
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] If
[6] [17.09.2012 08:14:19]     Free on Disk C:: 85.787.234.304 bytes  This is more than the required amount of 10.000.000 bytes
[5] [17.09.2012 08:14:19]   HasMinimumSpace ("C:", "10 MB")   <<< result true
[5] [17.09.2012 08:14:19]   not (HasMinimumSpace ("C:", "10 MB"))   <<< result false
[5] [17.09.2012 08:14:19] Then
[5] [17.09.2012 08:14:19] EndIf
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] If
[5] [17.09.2012 08:14:19]   $INST_vcredistx86_installed$ = "false"   <<< result false
[5] [17.09.2012 08:14:19] Then
[5] [17.09.2012 08:14:19] EndIf
[5] [17.09.2012 08:14:19] comment: set mode
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] Set  $INST_Paramstr$=PARAMSTR
[6] [17.09.2012 08:14:19]   The value of the variable "$INST_Paramstr$" is now: "INSTALL:CREATE_CLIENT:REBOOT"
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] Set  $INST_ParamstrList$ = splitstring($INST_Paramstr$, ":")
[6] [17.09.2012 08:14:19]     retrieving strings from splitstring [switch to loglevel 7 for debugging]
[7] [17.09.2012 08:14:19]         (string   0)INSTALL
[7] [17.09.2012 08:14:19]         (string   1)CREATE_CLIENT
[7] [17.09.2012 08:14:19]         (string   2)REBOOT
[7] [17.09.2012 08:14:19]         
[5] [17.09.2012 08:14:19] comment: Modus normally set by commandline argument
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] Set  $INST_MODUS$=takestring(0,$INST_ParamstrList$)
[6] [17.09.2012 08:14:19]     retrieving strings from $INST_ParamstrList$ [switch to loglevel 7 for debugging]
[7] [17.09.2012 08:14:19]         (string   0)INSTALL
[7] [17.09.2012 08:14:19]         (string   1)CREATE_CLIENT
[7] [17.09.2012 08:14:19]         (string   2)REBOOT
[7] [17.09.2012 08:14:19]         
[6] [17.09.2012 08:14:19]   The value of the variable "$INST_MODUS$" is now: "INSTALL"
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] Set  $INST_SubModus$=takestring(1,$INST_ParamstrList$)
[6] [17.09.2012 08:14:19]     retrieving strings from $INST_ParamstrList$ [switch to loglevel 7 for debugging]
[7] [17.09.2012 08:14:19]         (string   0)INSTALL
[7] [17.09.2012 08:14:19]         (string   1)CREATE_CLIENT
[7] [17.09.2012 08:14:19]         (string   2)REBOOT
[7] [17.09.2012 08:14:19]         
[6] [17.09.2012 08:14:19]   The value of the variable "$INST_SubModus$" is now: "CREATE_CLIENT"
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] Set  $INST_tmpstr$ = takestring(2,$INST_ParamstrList$)
[6] [17.09.2012 08:14:19]     retrieving strings from $INST_ParamstrList$ [switch to loglevel 7 for debugging]
[7] [17.09.2012 08:14:19]         (string   0)INSTALL
[7] [17.09.2012 08:14:19]         (string   1)CREATE_CLIENT
[7] [17.09.2012 08:14:19]         (string   2)REBOOT
[7] [17.09.2012 08:14:19]         
[6] [17.09.2012 08:14:19]   The value of the variable "$INST_tmpstr$" is now: "REBOOT"
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] If
[5] [17.09.2012 08:14:19]   lower(trim($INST_tmpstr$)) = "noreboot"   <<< result false
[5] [17.09.2012 08:14:19] Then
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] Else
[5] [17.09.2012 08:14:19]   
[5] [17.09.2012 08:14:19]   If
[5] [17.09.2012 08:14:19]     lower(trim($INST_tmpstr$)) = "reboot"   <<< result true
[5] [17.09.2012 08:14:19]   Then
[5] [17.09.2012 08:14:19]     
[5] [17.09.2012 08:14:19]     Set  $INST_AllowReboot$ = "true"
[6] [17.09.2012 08:14:19]       The value of the variable "$INST_AllowReboot$" is now: "true"
[5] [17.09.2012 08:14:19]   EndIf
[5] [17.09.2012 08:14:19] EndIf
[5] [17.09.2012 08:14:19] comment: old Modes are remaped for backward compatibility
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] If
[5] [17.09.2012 08:14:19]   $INST_MODUS$ = "LOCAL"   <<< result false
[5] [17.09.2012 08:14:19] Then
[5] [17.09.2012 08:14:19] EndIf
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] If
[5] [17.09.2012 08:14:19]   $INST_MODUS$ = "LOCAL_REINSTALL"   <<< result false
[5] [17.09.2012 08:14:19] Then
[5] [17.09.2012 08:14:19] EndIf
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] If
[5] [17.09.2012 08:14:19]   $INST_MODUS$ = "SERVICE_INTERACTIVE"   <<< result false
[5] [17.09.2012 08:14:19] Then
[5] [17.09.2012 08:14:19] EndIf
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] If
[5] [17.09.2012 08:14:19]   $INST_MODUS$ = "TFTP"   <<< result false
[5] [17.09.2012 08:14:19] Then
[5] [17.09.2012 08:14:19] EndIf
[5] [17.09.2012 08:14:19] comment: default submode of INSTALL is CONFIG_INI
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] If
[5] [17.09.2012 08:14:19]   $INST_MODUS$ = "INSTALL"   <<< result true
[5] [17.09.2012 08:14:19] Then
[5] [17.09.2012 08:14:19]   
[5] [17.09.2012 08:14:19]   If
[5] [17.09.2012 08:14:19]     $INST_SubModus$ = ""   <<< result false
[5] [17.09.2012 08:14:19]   Then
[5] [17.09.2012 08:14:19]   EndIf
[5] [17.09.2012 08:14:19] EndIf
[5] [17.09.2012 08:14:19] comment: map Mode REMOTEDEPLOY
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] If
[5] [17.09.2012 08:14:19]   $INST_MODUS$ = "REMOTEDEPLOY"   <<< result false
[5] [17.09.2012 08:14:19] Then
[5] [17.09.2012 08:14:19] EndIf
[5] [17.09.2012 08:14:19] comment: if no commandline argument we default to update
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] If
[5] [17.09.2012 08:14:19]   $INST_MODUS$ = ""   <<< result false
[5] [17.09.2012 08:14:19] Then
[5] [17.09.2012 08:14:19] EndIf
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] If
[5] [17.09.2012 08:14:19]   $INST_SubModus$ = "BOOTIMAGE"   <<< result false
[5] [17.09.2012 08:14:19] Then
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] Else
[5] [17.09.2012 08:14:19]   
[5] [17.09.2012 08:14:19]   Set  $INST_AllowReboot$ = GetProductProperty("allow_reboot", $INST_AllowReboot$)
[6] [17.09.2012 08:14:19]     The value of the variable "$INST_AllowReboot$" is now: "true"
[5] [17.09.2012 08:14:19] EndIf
[6] [17.09.2012 08:14:19] 
[6] [17.09.2012 08:14:19] ~~~~~~~ Start Sub ~~~~~~~  sub_read_configuration
[5] [17.09.2012 08:14:19] comment: get installed gina
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] Set  $INST_AktGina$ = GetRegistryStringValueSysnative("[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon] GinaDLL")
[7] [17.09.2012 08:14:19] Registry started without redirection (64 Bit)
[6] [17.09.2012 08:14:19]   Registry key [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon]  opened
[6] [17.09.2012 08:14:19]   Variable "GinaDLL"  not found. Code: 2
[6] [17.09.2012 08:14:19]   Variable "GinaDLL"  not found. Code: 2
[6] [17.09.2012 08:14:19]   Key closed
[6] [17.09.2012 08:14:19]   The value of the variable "$INST_AktGina$" is now: ""
[5] [17.09.2012 08:14:19] comment: get nextgina to chain
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] Set  $INST_gina_to_chain$ = GetRegistryStringValueSysnative("[HKEY_LOCAL_MACHINE\SOFTWARE\opsi.org\opsi-client-agent] NextGina")
[7] [17.09.2012 08:14:19] Registry started without redirection (64 Bit)
[6] [17.09.2012 08:14:19]   Info: Registry key [HKEY_LOCAL_MACHINE\SOFTWARE\opsi.org\opsi-client-agent]   could not be opened by RegOpenKeyEx,  Errorno 2 "Das System kann die angegebene Datei nicht finden.
"
[6] [17.09.2012 08:14:19]   The value of the variable "$INST_gina_to_chain$" is now: ""
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] If
[5] [17.09.2012 08:14:19]   $INST_gina_to_chain$ = ""   <<< result true
[5] [17.09.2012 08:14:19] Then
[5] [17.09.2012 08:14:19]   comment: no nextGina entry at opsi-client-agent - let us look at the old preloginloader key
[5] [17.09.2012 08:14:19]   
[5] [17.09.2012 08:14:19]   Set  $INST_gina_to_chain$ = GetRegistryStringValueSysnative("[HKEY_LOCAL_MACHINE\SOFTWARE\opsi.org\preloginloader] NextGina")
[7] [17.09.2012 08:14:19]   Registry started without redirection (64 Bit)
[6] [17.09.2012 08:14:19]     Info: Registry key [HKEY_LOCAL_MACHINE\SOFTWARE\opsi.org\preloginloader]   could not be opened by RegOpenKeyEx,  Errorno 2 "Das System kann die angegebene Datei nicht finden.
"
[6] [17.09.2012 08:14:19]     The value of the variable "$INST_gina_to_chain$" is now: ""
[5] [17.09.2012 08:14:19] EndIf
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] If
[5] [17.09.2012 08:14:19]   $INST_gina_to_chain$ = ""   <<< result true
[5] [17.09.2012 08:14:19] Then
[5] [17.09.2012 08:14:19]   comment: no new opsigina installed - let us look for opsi pgina installation
[5] [17.09.2012 08:14:19]   
[5] [17.09.2012 08:14:19]   Set  $INST_gina_to_chain$ = GetRegistryStringValueSysnative("[HKEY_LOCAL_MACHINE\SOFTWARE\opsi.org\preloginloader] pathMSGina")
[7] [17.09.2012 08:14:19]   Registry started without redirection (64 Bit)
[6] [17.09.2012 08:14:19]     Info: Registry key [HKEY_LOCAL_MACHINE\SOFTWARE\opsi.org\preloginloader]   could not be opened by RegOpenKeyEx,  Errorno 2 "Das System kann die angegebene Datei nicht finden.
"
[6] [17.09.2012 08:14:19]     The value of the variable "$INST_gina_to_chain$" is now: ""
[5] [17.09.2012 08:14:19] EndIf
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] If
[5] [17.09.2012 08:14:19]   $INST_gina_to_chain$ = ""   <<< result true
[5] [17.09.2012 08:14:19] Then
[5] [17.09.2012 08:14:19]   comment: no new opsi pgina installed - let us look for legacy opsi installation
[5] [17.09.2012 08:14:19]   
[5] [17.09.2012 08:14:19]   Set  $INST_old_reg_gina_installed$ = GetRegistryStringValueSysnative("[HKEY_LOCAL_MACHINE\SOFTWARE\pGina\Opsi] Installed")
[7] [17.09.2012 08:14:19]   Registry started without redirection (64 Bit)
[6] [17.09.2012 08:14:19]     Info: Registry key [HKEY_LOCAL_MACHINE\SOFTWARE\pGina\Opsi]   could not be opened by RegOpenKeyEx,  Errorno 2 "Das System kann die angegebene Datei nicht finden.
"
[6] [17.09.2012 08:14:19]     The value of the variable "$INST_old_reg_gina_installed$" is now: ""
[5] [17.09.2012 08:14:19]   
[5] [17.09.2012 08:14:19]   If
[5] [17.09.2012 08:14:19]     $INST_old_reg_gina_installed$ = "1"   <<< result false
[5] [17.09.2012 08:14:19]   Then
[5] [17.09.2012 08:14:19]   EndIf
[5] [17.09.2012 08:14:19] EndIf
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] If
[5] [17.09.2012 08:14:19]   $INST_gina_to_chain$ = ""   <<< result true
[5] [17.09.2012 08:14:19]   "64 Bit System" = GetSystemType   <<< result false
[5] [17.09.2012 08:14:19]   ("64 Bit System" = GetSystemType)   <<< result false
[5] [17.09.2012 08:14:19]   ($INST_gina_to_chain$ = "") and ("64 Bit System" = GetSystemType)   <<< result false
[5] [17.09.2012 08:14:19] Then
[5] [17.09.2012 08:14:19] EndIf
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] If
[5] [17.09.2012 08:14:19]   $INST_NTVersion$ < "6.0"   <<< result true
[5] [17.09.2012 08:14:19] Then
[5] [17.09.2012 08:14:19]   
[5] [17.09.2012 08:14:19]   If
[5] [17.09.2012 08:14:19]     $INST_AktGina$ = ""   <<< result true
[5] [17.09.2012 08:14:19]     ($INST_AktGina$ = "")   <<< result true
[5] [17.09.2012 08:14:19]   Then
[5] [17.09.2012 08:14:19]     comment: opsigina seems not be installed and we are on a fresh XP
[5] [17.09.2012 08:14:19]     
[5] [17.09.2012 08:14:19]     Set  $INST_gina_to_chain$ = "msgina.dll"
[6] [17.09.2012 08:14:19]       The value of the variable "$INST_gina_to_chain$" is now: "msgina.dll"
[5] [17.09.2012 08:14:19]   
[5] [17.09.2012 08:14:19]   Else
[5] [17.09.2012 08:14:19]     
[5] [17.09.2012 08:14:19]     If
[5] [17.09.2012 08:14:19]     Then
[5] [17.09.2012 08:14:19]     
[5] [17.09.2012 08:14:19]     Else
[5] [17.09.2012 08:14:19]     EndIf
[5] [17.09.2012 08:14:19]   EndIf
[5] [17.09.2012 08:14:19] EndIf
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] Set  $GEN_bootmode$    	 = GetValueFromInifile($INST_cfgini$, "general", "bootmode", $GEN_bootmode$)
[6] [17.09.2012 08:14:19]         reading the value to the key "bootmode" in section "general"  from inifile  "C:\tmp\opsi\cfg\config.ini", default value  "BKSTD"
[6] [17.09.2012 08:14:19]   The value of the variable "$GEN_bootmode$" is now: "BKSTD"
[5] [17.09.2012 08:14:19] comment: Getting dns domain from config file
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] Set  $INST_DnsDomainName$ = GetValueFromInifile($INST_cfgini$, "general", "dnsdomain", $INST_DnsDomainName$)
[6] [17.09.2012 08:14:19]         reading the value to the key "dnsdomain" in section "general"  from inifile  "C:\tmp\opsi\cfg\config.ini", default value  ""
[6] [17.09.2012 08:14:19]   The value of the variable "$INST_DnsDomainName$" is now: "oead.local"
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] If
[5] [17.09.2012 08:14:19]   $INST_DnsDomainName$ = ""   <<< result false
[5] [17.09.2012 08:14:19]   ($INST_DnsDomainName$ = "")   <<< result false
[5] [17.09.2012 08:14:19] Then
[5] [17.09.2012 08:14:19] EndIf
[1] [17.09.2012 08:14:19] LogLevel was 7
[1] [17.09.2012 08:14:19] LogLevel set to 7
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] Set  $SHI_pckey$ = GetValueFromInifile($INST_cfgini$, "shareinfo", "pckey", "")
[6] [17.09.2012 08:14:19]         reading the value to the key "pckey" in section "shareinfo"  from inifile  "C:\tmp\opsi\cfg\config.ini", default value  ""
[6] [17.09.2012 08:14:19]   The value of the variable "$SHI_pckey$" is now: "#@PCKEY#"
[1] [17.09.2012 08:14:19] LogLevel was 7
[1] [17.09.2012 08:14:19] LogLevel set to 7
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] Set  $OCD_global.log_level$ 		    = GetValueFromInifile($INST_cfgini$, "opsiclientd", "global.log_level", $OCD_global.log_level$)
[6] [17.09.2012 08:14:19]         reading the value to the key "global.log_level" in section "opsiclientd"  from inifile  "C:\tmp\opsi\cfg\config.ini", default value  ""
[6] [17.09.2012 08:14:19]   The value of the variable "$OCD_global.log_level$" is now: "6"
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] Set  $OCD_config_service.url$ 		    = GetValueFromInifile($INST_cfgini$, "opsiclientd", "config_service.url", $OCD_config_service.url$)
[6] [17.09.2012 08:14:19]         reading the value to the key "config_service.url" in section "opsiclientd"  from inifile  "C:\tmp\opsi\cfg\config.ini", default value  ""
[6] [17.09.2012 08:14:19]   The value of the variable "$OCD_config_service.url$" is now: "https://10.12.1.20:4447"
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] Set  $OCD_config_service.connection_timeout$ = GetValueFromInifile($INST_cfgini$, "opsiclientd", "config_service.connection_timeout", $OCD_config_service.connection_timeout$)
[6] [17.09.2012 08:14:19]         reading the value to the key "config_service.connection_timeout" in section "opsiclientd"  from inifile  "C:\tmp\opsi\cfg\config.ini", default value  "10"
[6] [17.09.2012 08:14:19]   The value of the variable "$OCD_config_service.connection_timeout$" is now: "30"
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] Set  $OCD_control_server.port$ 		    = GetValueFromInifile($INST_cfgini$, "opsiclientd", "control_server.port", $OCD_control_server.port$)
[6] [17.09.2012 08:14:19]         reading the value to the key "control_server.port" in section "opsiclientd"  from inifile  "C:\tmp\opsi\cfg\config.ini", default value  ""
[6] [17.09.2012 08:14:19]   The value of the variable "$OCD_control_server.port$" is now: "4441"
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] Set  $OCD_notification_server.port$ 	    = GetValueFromInifile($INST_cfgini$, "opsiclientd", "notification_server.port", $OCD_notification_server.port$)
[6] [17.09.2012 08:14:19]         reading the value to the key "notification_server.port" in section "opsiclientd"  from inifile  "C:\tmp\opsi\cfg\config.ini", default value  ""
[6] [17.09.2012 08:14:19]   The value of the variable "$OCD_notification_server.port$" is now: "4442"
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] Set  $OCD_open_firewall_for_control_server$  = GetValueFromInifile($INST_cfgini$, "opsiclientd", "open_firewall_for_control_server", $OCD_open_firewall_for_control_server$)
[6] [17.09.2012 08:14:19]         reading the value to the key "open_firewall_for_control_server" in section "opsiclientd"  from inifile  "C:\tmp\opsi\cfg\config.ini", default value  ""
[6] [17.09.2012 08:14:19]   The value of the variable "$OCD_open_firewall_for_control_server$" is now: "1"
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] Set  $OLB_LogLevel$ 			    = GetValueFromInifile($INST_cfgini$, "opsiLoginBlocker", "LogLevel", $OLB_LogLevel$)
[6] [17.09.2012 08:14:19]         reading the value to the key "LogLevel" in section "opsiLoginBlocker"  from inifile  "C:\tmp\opsi\cfg\config.ini", default value  ""
[6] [17.09.2012 08:14:19]   The value of the variable "$OLB_LogLevel$" is now: "6"
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] Set  $OLB_LoginBlockerStart$          	    = GetValueFromInifile($INST_cfgini$, "opsiLoginBlocker", "LoginBlockerStart", $OLB_LoginBlockerStart$)
[6] [17.09.2012 08:14:19]         reading the value to the key "LoginBlockerStart" in section "opsiLoginBlocker"  from inifile  "C:\tmp\opsi\cfg\config.ini", default value  "1"
[6] [17.09.2012 08:14:19]   The value of the variable "$OLB_LoginBlockerStart$" is now: "1"
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] Set  $OLB_LoginBlockerTimeoutConnect$	    = GetValueFromInifile($INST_cfgini$, "opsiLoginBlocker", "LoginBlockerTimeoutConnect", $OLB_LoginBlockerTimeoutConnect$)
[6] [17.09.2012 08:14:19]         reading the value to the key "LoginBlockerTimeoutConnect" in section "opsiLoginBlocker"  from inifile  "C:\tmp\opsi\cfg\config.ini", default value  "120"
[6] [17.09.2012 08:14:19]   The value of the variable "$OLB_LoginBlockerTimeoutConnect$" is now: "120"
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] If
[5] [17.09.2012 08:14:19]   GetProductProperty ("LoginBlockerStart","") = "on"   <<< result false
[5] [17.09.2012 08:14:19] Then
[5] [17.09.2012 08:14:19] EndIf
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] If
[5] [17.09.2012 08:14:19]   GetProductProperty ("LoginBlockerStart","") = "off"   <<< result false
[5] [17.09.2012 08:14:19] Then
[5] [17.09.2012 08:14:19] EndIf
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] Set  $INST_Service_User$          	= GetValueFromInifile($INST_cfgini$, "installation", "service_user", $INST_Service_User$)
[6] [17.09.2012 08:14:19]         reading the value to the key "service_user" in section "installation"  from inifile  "C:\tmp\opsi\cfg\config.ini", default value  "pcpatch"
[6] [17.09.2012 08:14:19]   The value of the variable "$INST_Service_User$" is now: "adminuser"
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] Set  $INST_Service_Password$      	= GetValueFromInifile($INST_cfgini$, "installation", "service_password", $INST_Service_Password$)
[6] [17.09.2012 08:14:19]         reading the value to the key "service_password" in section "installation"  from inifile  "C:\tmp\opsi\cfg\config.ini", default value  "pcpatch"
[6] [17.09.2012 08:14:19]   The value of the variable "$INST_Service_Password$" is now: "none"
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] Set  $INST_service_hidden_password$      	= GetValueFromInifile($INST_cfgini$, "installation", "service_hidden_password", $INST_service_hidden_password$)
[6] [17.09.2012 08:14:19]         reading the value to the key "service_hidden_password" in section "installation"  from inifile  "C:\tmp\opsi\cfg\config.ini", default value  ""
[6] [17.09.2012 08:14:19]   The value of the variable "$INST_service_hidden_password$" is now: ""
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] If
[5] [17.09.2012 08:14:19]   $INST_service_hidden_password$ = ""   <<< result true
[5] [17.09.2012 08:14:19]   not ($INST_service_hidden_password$ = "")   <<< result false
[5] [17.09.2012 08:14:19] Then
[5] [17.09.2012 08:14:19] EndIf
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] If
[6] [17.09.2012 08:14:19]     Starting query if file exist ...
[5] [17.09.2012 08:14:19]     "C:\tmp\opsi\cfg\sysconf.ini": File Error 2 (Das System kann die angegebene Datei nicht finden.
)
[5] [17.09.2012 08:14:19]   FileExists ($INST_sysconfini$)   <<< result false
[5] [17.09.2012 08:14:19]   (FileExists ($INST_sysconfini$))   <<< result false
[5] [17.09.2012 08:14:19] Then
[5] [17.09.2012 08:14:19] EndIf
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] If
[5] [17.09.2012 08:14:19]   $INST_pcname$ = ""   <<< result false
[5] [17.09.2012 08:14:19] Then
[5] [17.09.2012 08:14:19] EndIf
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] Set  $INST_pcname$ = lower($INST_pcname$)
[6] [17.09.2012 08:14:19]   The value of the variable "$INST_pcname$" is now: "bsp-pc13-8200"
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] If
[5] [17.09.2012 08:14:19]   $INST_DnsDomainName$ = ""   <<< result false
[5] [17.09.2012 08:14:19]   not ($INST_DnsDomainName$ = "")   <<< result true
[5] [17.09.2012 08:14:19] Then
[5] [17.09.2012 08:14:19]   
[5] [17.09.2012 08:14:19]   Set  $INST_ClientId$ = $INST_pcname$ + "." + $INST_DnsDomainName$
[6] [17.09.2012 08:14:19]     The value of the variable "$INST_ClientId$" is now: "bsp-pc13-8200.oead.local"
[5] [17.09.2012 08:14:19] EndIf
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] If
[5] [17.09.2012 08:14:19]   $GEN_bootmode$ = ""   <<< result false
[5] [17.09.2012 08:14:19] Then
[5] [17.09.2012 08:14:19] EndIf
[5] [17.09.2012 08:14:19] 
[5] [17.09.2012 08:14:19] If
[5] [17.09.2012 08:14:19]   $INST_Modus$ = "INSTALL"   <<< result true
[5] [17.09.2012 08:14:19] Then
[5] [17.09.2012 08:14:19]   
[5] [17.09.2012 08:14:19]   If
[5] [17.09.2012 08:14:19]     $INST_SubModus$ = "BOOTIMAGE"   <<< result false
[5] [17.09.2012 08:14:19]   Then
[5] [17.09.2012 08:14:19]   EndIf
[5] [17.09.2012 08:14:19]   
[5] [17.09.2012 08:14:19]   If
[5] [17.09.2012 08:14:19]     $INST_SubModus$ = "CREATE_CLIENT"   <<< result true
[5] [17.09.2012 08:14:19]   Then
[6] [17.09.2012 08:14:19]     
[6] [17.09.2012 08:14:19]     ~~~~~~~ Start Sub ~~~~~~~  sub_sub_create_client
[5] [17.09.2012 08:14:19]     
[5] [17.09.2012 08:14:19]     If
[5] [17.09.2012 08:14:19]       $OCD_config_service.url$ = ""   <<< result false
[5] [17.09.2012 08:14:19]       ($OCD_config_service.url$ = "")   <<< result false
[5] [17.09.2012 08:14:19]     Then
[5] [17.09.2012 08:14:19]     EndIf
[5] [17.09.2012 08:14:19]     comment: Connect to service.....
[6] [17.09.2012 08:14:19]     Marked error number 0
[5] [17.09.2012 08:14:19]     
[5] [17.09.2012 08:14:19]     Execution of opsiservicecall_authenticated
[6] [17.09.2012 08:14:19]          "method": "authenticated"
[3] [17.09.2012 08:14:19]       Error: service not initialized
[3] [17.09.2012 08:14:19]       Error: no connection to service
[5] [17.09.2012 08:14:19]     
[5] [17.09.2012 08:14:19]     If
[5] [17.09.2012 08:14:19]       errorsOccuredSinceMark > 0   <<< result true
[5] [17.09.2012 08:14:19]     Then
[5] [17.09.2012 08:14:19]       
[5] [17.09.2012 08:14:19]       Set  $INST_error$ = "true"
[6] [17.09.2012 08:14:19]         The value of the variable "$INST_error$" is now: "true"
[5] [17.09.2012 08:14:19]       comment: was not authenticated -> retry scripted login by default user/password
[5] [17.09.2012 08:14:19]     
[5] [17.09.2012 08:14:19]     Else
[5] [17.09.2012 08:14:19]     EndIf
[5] [17.09.2012 08:14:19]     
[5] [17.09.2012 08:14:19]     If
[6] [17.09.2012 08:14:19]           retrieving strings from $INST_ServiceResult$ [switch to loglevel 7 for debugging]
[7] [17.09.2012 08:14:19]               
[6] [17.09.2012 08:14:19]       effective list index 0 not in bounds 0, -1
[5] [17.09.2012 08:14:19]       takeString(0,$INST_ServiceResult$) = "false"   <<< result false
[5] [17.09.2012 08:14:19]       $INST_error$ = "true"   <<< result true
[5] [17.09.2012 08:14:19]       ($INST_error$ = "true")   <<< result true
[5] [17.09.2012 08:14:19]       (takeString(0,$INST_ServiceResult$) = "false") or ($INST_error$ = "true")   <<< result true
[5] [17.09.2012 08:14:19]     Then
[5] [17.09.2012 08:14:19]       comment: was not authenticated as admin-> retry scripted login by default user/password
[6] [17.09.2012 08:14:19]       Marked error number 2
[5] [17.09.2012 08:14:19]       
[5] [17.09.2012 08:14:19]       Set  $INST_error$ = "false"
[6] [17.09.2012 08:14:19]         The value of the variable "$INST_error$" is now: "false"
[1] [17.09.2012 08:14:19]       LogLevel was 7
[1] [17.09.2012 08:14:19]       LogLevel set to 7
[5] [17.09.2012 08:14:19]       
[5] [17.09.2012 08:14:19]       Execution of opsiservicecall_authenticated
[6] [17.09.2012 08:14:19]            "method": "authenticated"
[3] [17.09.2012 08:14:22]         Error: retrieveJSONObject --- opsi service problem ---{"message":"Opsi authentication error: Forbidden: Backend authentication error: Backend authentication error: PAM authentication failed for user 'adminuser': ('Authentication failure', 7)","class":"OpsiAuthenticationError"}
[3] [17.09.2012 08:14:23]         Error: retrieveJSONObject --- opsi service problem ---{"message":"Opsi authentication error: Forbidden: Backend authentication error: Backend authentication error: PAM authentication failed for user 'adminuser': ('Authentication failure', 7)","class":"OpsiAuthenticationError"}
[5] [17.09.2012 08:14:23]         opsi Server Version : 
[4] [17.09.2012 08:14:23]         opsi service version could not retrieved, perhaps no connection
[3] [17.09.2012 08:14:23]         Error: no connection to service
[1] [17.09.2012 08:14:23]       LogLevel was 7
[1] [17.09.2012 08:14:23]       LogLevel set to 7
[5] [17.09.2012 08:14:23]       
[5] [17.09.2012 08:14:23]       If
[5] [17.09.2012 08:14:23]         errorsOccuredSinceMark > 0   <<< result true
[5] [17.09.2012 08:14:23]       Then
[5] [17.09.2012 08:14:23]         
[5] [17.09.2012 08:14:23]         Set  $INST_error$ = "true"
[6] [17.09.2012 08:14:23]           The value of the variable "$INST_error$" is now: "true"
[5] [17.09.2012 08:14:23]         comment: scripted login by default user/password failed -> retry interactive
[5] [17.09.2012 08:14:23]       
[5] [17.09.2012 08:14:23]       Else
[5] [17.09.2012 08:14:23]         
[5] [17.09.2012 08:14:23]         If
[5] [17.09.2012 08:14:23]         Then
[5] [17.09.2012 08:14:23]         EndIf
[5] [17.09.2012 08:14:23]       EndIf
[5] [17.09.2012 08:14:23]       
[5] [17.09.2012 08:14:23]       If
[6] [17.09.2012 08:14:23]             retrieving strings from $INST_ServiceResult$ [switch to loglevel 7 for debugging]
[7] [17.09.2012 08:14:23]                 
[6] [17.09.2012 08:14:23]         effective list index 0 not in bounds 0, -1
[5] [17.09.2012 08:14:23]         takeString(0,$INST_ServiceResult$) = "false"   <<< result false
[5] [17.09.2012 08:14:23]         $INST_error$ = "true"   <<< result true
[5] [17.09.2012 08:14:23]         ($INST_error$ = "true")   <<< result true
[5] [17.09.2012 08:14:23]         (takeString(0,$INST_ServiceResult$) = "false") or ($INST_error$ = "true")   <<< result true
[5] [17.09.2012 08:14:23]       Then
[5] [17.09.2012 08:14:23]         
[5] [17.09.2012 08:14:23]         Set  $INST_error$ = "false"
[6] [17.09.2012 08:14:23]           The value of the variable "$INST_error$" is now: "false"
[1] [17.09.2012 08:14:23]         LogLevel was 7
[1] [17.09.2012 08:14:23]         LogLevel set to 7
[5] [17.09.2012 08:14:23]         
[5] [17.09.2012 08:14:23]         Execution of opsiservicecall_authenticated
[6] [17.09.2012 08:14:23]              "method": "authenticated"
[3] [17.09.2012 08:14:38]           Error: retrieveJSONObject --- opsi service problem ---{"message":"Opsi authentication error: Forbidden: Backend authentication error: Backend authentication error: PAM authentication failed for user 'Administrator': ('Authentication failure', 7)","class":"OpsiAuthenticationError"}
[3] [17.09.2012 08:14:40]           Error: retrieveJSONObject --- opsi service problem ---{"message":"Opsi authentication error: Forbidden: Backend authentication error: Backend authentication error: PAM authentication failed for user 'Administrator': ('Authentication failure', 7)","class":"OpsiAuthenticationError"}
[5] [17.09.2012 08:14:40]           opsi Server Version : 
[3] [17.09.2012 08:15:08]           Error: retrieveJSONObject --- opsi service problem ---{"message":"Opsi authentication error: Forbidden: Backend authentication error: Backend authentication error: PAM authentication failed for user 'Adminuser': ('Authentication failure', 7)","class":"OpsiAuthenticationError"}

danke & lg

[Sapgui]

hallo nochmal!

auch mit konfigurierter config.ini passiert leider nicht viel mehr. allerdings ist ein "process aported" in der log-datei:

Code: Alles auswählen

[6] [17.09.2012 09:02:58]     
[6] [17.09.2012 09:02:58]     ~~~~~~~ Start Sub ~~~~~~~  sub_sub_create_client
[5] [17.09.2012 09:02:58]     
[5] [17.09.2012 09:02:58]     If
[5] [17.09.2012 09:02:58]       $OCD_config_service.url$ = ""   <<< result false
[5] [17.09.2012 09:02:58]       ($OCD_config_service.url$ = "")   <<< result false
[5] [17.09.2012 09:02:58]     Then
[5] [17.09.2012 09:02:58]     EndIf
[5] [17.09.2012 09:02:58]     comment: Connect to service.....
[6] [17.09.2012 09:02:58]     Marked error number 0
[5] [17.09.2012 09:02:58]     
[5] [17.09.2012 09:02:58]     Execution of opsiservicecall_authenticated
[6] [17.09.2012 09:02:58]          "method": "authenticated"
[3] [17.09.2012 09:02:58]       Error: service not initialized
[3] [17.09.2012 09:02:58]       Error: no connection to service
[5] [17.09.2012 09:02:58]     
[5] [17.09.2012 09:02:58]     If
[5] [17.09.2012 09:02:58]       errorsOccuredSinceMark > 0   <<< result true
[5] [17.09.2012 09:02:58]     Then
[5] [17.09.2012 09:02:58]       
[5] [17.09.2012 09:02:58]       Set  $INST_error$ = "true"
[6] [17.09.2012 09:02:58]         The value of the variable "$INST_error$" is now: "true"
[5] [17.09.2012 09:02:58]       comment: was not authenticated -> retry scripted login by default user/password
[5] [17.09.2012 09:02:58]     
[5] [17.09.2012 09:02:58]     Else
[5] [17.09.2012 09:02:58]     EndIf
[5] [17.09.2012 09:02:58]     
[5] [17.09.2012 09:02:58]     If
[6] [17.09.2012 09:02:58]           retrieving strings from $INST_ServiceResult$ [switch to loglevel 7 for debugging]
[7] [17.09.2012 09:02:58]               
[6] [17.09.2012 09:02:58]       effective list index 0 not in bounds 0, -1
[5] [17.09.2012 09:02:58]       takeString(0,$INST_ServiceResult$) = "false"   <<< result false
[5] [17.09.2012 09:02:58]       $INST_error$ = "true"   <<< result true
[5] [17.09.2012 09:02:58]       ($INST_error$ = "true")   <<< result true
[5] [17.09.2012 09:02:58]       (takeString(0,$INST_ServiceResult$) = "false") or ($INST_error$ = "true")   <<< result true
[5] [17.09.2012 09:02:58]     Then
[5] [17.09.2012 09:02:58]       comment: was not authenticated as admin-> retry scripted login by default user/password
[6] [17.09.2012 09:02:58]       Marked error number 2
[5] [17.09.2012 09:02:58]       
[5] [17.09.2012 09:02:58]       Set  $INST_error$ = "false"
[6] [17.09.2012 09:02:58]         The value of the variable "$INST_error$" is now: "false"
[1] [17.09.2012 09:02:58]       LogLevel was 7
[1] [17.09.2012 09:02:58]       LogLevel set to 7
[5] [17.09.2012 09:02:58]       
[5] [17.09.2012 09:02:58]       Execution of opsiservicecall_authenticated
[6] [17.09.2012 09:02:58]            "method": "authenticated"
[3] [17.09.2012 09:04:00]         Error: retrieveJSONObject --- opsi service problem ---{"message":"Opsi authentication error: Forbidden: Backend authentication error: Backend authentication error: PAM authentication failed for user 'Administrator': ('Authentication failure', 7)","class":"OpsiAuthenticationError"}
[3] [17.09.2012 09:05:02]         Error: retrieveJSONObject --- opsi service problem ---{"message":"Opsi authentication error: Forbidden: Backend authentication error: Backend authentication error: PAM authentication failed for user 'Administrator': ('Authentication failure', 7)","class":"OpsiAuthenticationError"}
[5] [17.09.2012 09:05:02]         opsi Server Version : 
[4] [17.09.2012 09:05:02]         opsi service version could not retrieved, perhaps no connection
[3] [17.09.2012 09:05:02]         Error: no connection to service
[1] [17.09.2012 09:05:02]       LogLevel was 7
[1] [17.09.2012 09:05:02]       LogLevel set to 7
[5] [17.09.2012 09:05:02]       
[5] [17.09.2012 09:05:02]       If
[5] [17.09.2012 09:05:02]         errorsOccuredSinceMark > 0   <<< result true
[5] [17.09.2012 09:05:02]       Then
[5] [17.09.2012 09:05:02]         
[5] [17.09.2012 09:05:02]         Set  $INST_error$ = "true"
[6] [17.09.2012 09:05:02]           The value of the variable "$INST_error$" is now: "true"
[5] [17.09.2012 09:05:02]         comment: scripted login by default user/password failed -> retry interactive
[5] [17.09.2012 09:05:02]       
[5] [17.09.2012 09:05:02]       Else
[5] [17.09.2012 09:05:02]         
[5] [17.09.2012 09:05:02]         If
[5] [17.09.2012 09:05:02]         Then
[5] [17.09.2012 09:05:02]         EndIf
[5] [17.09.2012 09:05:02]       EndIf
[5] [17.09.2012 09:05:02]       
[5] [17.09.2012 09:05:02]       If
[6] [17.09.2012 09:05:02]             retrieving strings from $INST_ServiceResult$ [switch to loglevel 7 for debugging]
[7] [17.09.2012 09:05:02]                 
[6] [17.09.2012 09:05:02]         effective list index 0 not in bounds 0, -1
[5] [17.09.2012 09:05:02]         takeString(0,$INST_ServiceResult$) = "false"   <<< result false
[5] [17.09.2012 09:05:02]         $INST_error$ = "true"   <<< result true
[5] [17.09.2012 09:05:02]         ($INST_error$ = "true")   <<< result true
[5] [17.09.2012 09:05:02]         (takeString(0,$INST_ServiceResult$) = "false") or ($INST_error$ = "true")   <<< result true
[5] [17.09.2012 09:05:02]       Then
[5] [17.09.2012 09:05:02]         
[5] [17.09.2012 09:05:02]         Set  $INST_error$ = "false"
[6] [17.09.2012 09:05:02]           The value of the variable "$INST_error$" is now: "false"
[1] [17.09.2012 09:05:02]         LogLevel was 7
[1] [17.09.2012 09:05:02]         LogLevel set to 7
[5] [17.09.2012 09:05:02]         
[5] [17.09.2012 09:05:02]         Execution of opsiservicecall_authenticated
[6] [17.09.2012 09:05:02]              "method": "authenticated"
[3] [17.09.2012 09:06:19]           Error: retrieveJSONObject --- opsi service problem ---{"message":"Opsi authentication error: Forbidden: Backend authentication error: Backend authentication error: PAM authentication failed for user 'Administrator': ('Authentication failure', 7)","class":"OpsiAuthenticationError"}
[3] [17.09.2012 09:07:22]           Error: retrieveJSONObject --- opsi service problem ---{"message":"Opsi authentication error: Forbidden: Backend authentication error: Backend authentication error: PAM authentication failed for user 'Administrator': ('Authentication failure', 7)","class":"OpsiAuthenticationError"}
[5] [17.09.2012 09:07:22]           opsi Server Version : 
[3] [17.09.2012 09:08:39]           Error: retrieveJSONObject --- opsi service problem ---{"message":"Opsi authentication error: Forbidden: Backend authentication error: Backend authentication error: PAM authentication failed for user 'Administrator': ('Authentication failure', 7)","class":"OpsiAuthenticationError"}
[3] [17.09.2012 09:09:41]           Error: retrieveJSONObject --- opsi service problem ---{"message":"Opsi authentication error: Forbidden: Backend authentication error: Backend authentication error: PAM authentication failed for user 'Administrator': ('Authentication failure', 7)","class":"OpsiAuthenticationError"}
[5] [17.09.2012 09:09:41]           opsi Server Version : 
[3] [17.09.2012 09:09:56]           Error: Cancelled by user
[3] [17.09.2012 09:09:56]           Error: no connection to service
[1] [17.09.2012 09:09:56]         LogLevel was 7
[1] [17.09.2012 09:09:56]         LogLevel set to 7
[6] [17.09.2012 09:09:56]         Marked error number 8
[5] [17.09.2012 09:09:56]         
[5] [17.09.2012 09:09:56]         Set  $INST_ServiceResult$ = getReturnListFromSection('opsiservicecall_UserIsAdmin')
[5] [17.09.2012 09:09:56]         
[5] [17.09.2012 09:09:56]         Execution of opsiservicecall_UserIsAdmin
[6] [17.09.2012 09:09:56]              "method": "userIsAdmin"
[3] [17.09.2012 09:09:56]           Error: service not initialized
[3] [17.09.2012 09:09:56]           Error: no connection to service
[6] [17.09.2012 09:09:56]             retrieving strings from getReturnListFromSection [switch to loglevel 7 for debugging]
[7] [17.09.2012 09:09:56]                 
[5] [17.09.2012 09:09:56]         
[5] [17.09.2012 09:09:56]         If
[5] [17.09.2012 09:09:56]           errorsOccuredSinceMark > 0   <<< result true
[5] [17.09.2012 09:09:56]         Then
[5] [17.09.2012 09:09:56]           
[5] [17.09.2012 09:09:56]           Set  $INST_error$ = "true"
[6] [17.09.2012 09:09:56]             The value of the variable "$INST_error$" is now: "true"
[5] [17.09.2012 09:09:56]           comment: check for user is admin failed failed -> abort
[5] [17.09.2012 09:09:56]         EndIf
[5] [17.09.2012 09:09:56]         
[5] [17.09.2012 09:09:56]         If
[6] [17.09.2012 09:09:56]               retrieving strings from $INST_ServiceResult$ [switch to loglevel 7 for debugging]
[7] [17.09.2012 09:09:56]                   
[6] [17.09.2012 09:09:56]           effective list index 0 not in bounds 0, -1
[5] [17.09.2012 09:09:56]           takeString(0,$INST_ServiceResult$) = "false"   <<< result false
[5] [17.09.2012 09:09:56]           $INST_error$ = "true"   <<< result true
[5] [17.09.2012 09:09:56]           ($INST_error$ = "true")   <<< result true
[5] [17.09.2012 09:09:56]           (takeString(0,$INST_ServiceResult$) = "false") or ($INST_error$ = "true")   <<< result true
[5] [17.09.2012 09:09:56]         Then
[3] [17.09.2012 09:09:56]           Error: No admin login
[5] [17.09.2012 09:09:57]           Error level set to fatal
[5] [17.09.2012 09:09:57]           Process aborted
[6] [17.09.2012 09:09:57]     
[6] [17.09.2012 09:09:57]     ~~~~~~~ End Sub   ~~~~~~~  sub_sub_create_client
[6] [17.09.2012 09:09:57]     
[5] [17.09.2012 09:09:57]     Process aborted
[6] [17.09.2012 09:09:57] 
[6] [17.09.2012 09:09:57] ~~~~~~~ End Sub   ~~~~~~~  sub_read_configuration
[6] [17.09.2012 09:09:57] 
[5] [17.09.2012 09:09:57] Process aborted
[1] [17.09.2012 09:09:57] ___________________
[1] [17.09.2012 09:09:57] script finished
[1] [17.09.2012 09:09:57] 11 errors
[1] [17.09.2012 09:09:57] 0 warnings
[1] [17.09.2012 09:09:57] 
[1] [17.09.2012 09:09:57] 
[6] [17.09.2012 09:09:57] Delete "c:\opsi.org\tmp\_winstbat_*"
[6] [17.09.2012 09:09:57]   Search "c:\opsi.org\tmp\"
[1] [17.09.2012 09:09:57] ============  winst Version 4.11.2.9 WIN32 is regularly exiting. Time 2012-09-17  09:09:57 .

lg

[wolfbardo]

Hallo!

Erstmal, ich bin neu beim Thema OPSI und bin momentan dabei, OPSI per opsi-deploy-client-agent auf ca. 200 WinXP_SP3 Clients auszurollen. Als Server ist ein Ubuntu 12.10.xx im Einsatz.

wirklich

Code: Alles auswählen

Ubuntu 12.10.xx

???


Gruss
Bardo Wolf

[Sapgui]

Mein Fehler! Das System ist "Ubuntu 12.04.1 LTS (GNU/Linux 3.2.0-30-generic x86_64)"

Bin bei Linux nicht ganz so Standfest, habe den Server nicht installiert und hatte wie gesagt keinen Zugriff auf das System

[d.oertel]

Hi,

beim service_setup.cmd musst bei der Login maske dich mit einem user authentifiziern der auf dem opsi-server bekannt ist und Mitglied der gruppe opsiadmin. Nicht der lokale Administrator.
Siehe hier:
http://download.uib.de/opsi4.0/doc/html ... and-groups

Damit bitte nochmal machen.

gruss
d.oertel

[Sapgui]

Hey,

ja, wir haben extra einen user angelegt, der Administrator heißt und das selbe PW hat, wie die lokalen Admins der Clientrechner. und in die gruppe gepackt. Der Einfachheit halber

Ich konnte das Phänomen mittlerweile lösen - auch wenn es mir irgendwie komisch vorkommt:
Führe ich die Datei \\opsiserver\opsi_depot\opsi-client-agent\service_setup.cmd aus (wie in "Getting Startet" beschrieben), schlägt die Installation mit dem genannten, immerwieder auftauchenden Loginfeld fehl.
Führe ich allerdings \\opsiserver\opt_pcbin\install\opsi-client-agent\service_setup.cmd aus, funktioniert die Installation.

Und bezüglich des ganz oben erwähnten Fehlers: Datei & Druckerfreigabe sollte natürlich schon auch aktiviert sein! *facepalm*

*solved* (auch wenn ich das, mit der service_setup.cmd nicht ganz nachvollziehen kann ...)