Office 2010 - Frage von absolutem Newbie
Office 2010 - Frage von absolutem Newbie
Hallo, alle zusammen
Bin absoluter Newbie und würde mich freuen, wenn mir hier jemand auf die Sprünge helfen könnte.
Ich möchte Office 2010 professional auf ca. 5 Rechnern verteilen. Klar könnte ich das auch per Hand tun, aber ich möchte einfach für zukünftige Installationen das ganze automatisiert ablaufen lassen und finde Opsi bisher eigentlich verständlich und für meine Zwecke einfach super.
Mir ist nur nicht ganz klar, was ich tun muss um Office installiert zu bekommen. Ich habe keine CD sondern nur die ausführbare .exe und den Lizenzkey. Die Installation soll unattended ablaufen.
Welche Schritte sind notwendig, um dies hinzubekommen.
Vielen Dank für Eure Unterstützung.
Carsten
Bin absoluter Newbie und würde mich freuen, wenn mir hier jemand auf die Sprünge helfen könnte.
Ich möchte Office 2010 professional auf ca. 5 Rechnern verteilen. Klar könnte ich das auch per Hand tun, aber ich möchte einfach für zukünftige Installationen das ganze automatisiert ablaufen lassen und finde Opsi bisher eigentlich verständlich und für meine Zwecke einfach super.
Mir ist nur nicht ganz klar, was ich tun muss um Office installiert zu bekommen. Ich habe keine CD sondern nur die ausführbare .exe und den Lizenzkey. Die Installation soll unattended ablaufen.
Welche Schritte sind notwendig, um dies hinzubekommen.
Vielen Dank für Eure Unterstützung.
Carsten
Re: Office 2010 - Frage von absolutem Newbie
Hi,
Grundsärtlich solltest du dir wenigstens das Getting Started durchlesen und verstehen wie OPSI funktioniert und wie die einzelnen Komponenten zusammenarbeiten. Dazu hier ein paar Links:
http://download.uib.de/opsi4.0/doc/html ... ntegration
wiki/
wiki/userspace:wie_man_diese_scripte_nu ... schreibung
wiki/userspace:microsoft_office_pro_2010_32_bit
Es stellt sich natürlich die Frage ob sich der Aufwand für 5 Rechner Lohnt.
Eine Softwareverteilung wie OPSI ist nicht mal eben so schnell eingerichtet sondern benötigt viel Einarbeitung, Pflege und Zeit.
Wenn es um Standardimages geht könntest du dir auch ein einfaches Installationsimage ( http://technet.microsoft.com/de-de/libr ... s.10).aspx ) erstellen welches die benötigte Software dann schon beinhaltet.
Gruß
Tobias
Grundsärtlich solltest du dir wenigstens das Getting Started durchlesen und verstehen wie OPSI funktioniert und wie die einzelnen Komponenten zusammenarbeiten. Dazu hier ein paar Links:
http://download.uib.de/opsi4.0/doc/html ... ntegration
wiki/
wiki/userspace:wie_man_diese_scripte_nu ... schreibung
wiki/userspace:microsoft_office_pro_2010_32_bit
Es stellt sich natürlich die Frage ob sich der Aufwand für 5 Rechner Lohnt.
Eine Softwareverteilung wie OPSI ist nicht mal eben so schnell eingerichtet sondern benötigt viel Einarbeitung, Pflege und Zeit.
Wenn es um Standardimages geht könntest du dir auch ein einfaches Installationsimage ( http://technet.microsoft.com/de-de/libr ... s.10).aspx ) erstellen welches die benötigte Software dann schon beinhaltet.
Gruß
Tobias
Re: Office 2010 - Frage von absolutem Newbie
Hallo Tobias
Natürlich gebe ich Dir recht, dass es sich eigentlich für 5 Rechner nicht lohnt, aber für mich ist es auch entscheident, dass meine Kollegen sich in meiner Abwesenheit die Rechner neu installieren können und ich trotzdem weiß, welche Software dort installiert ist. Auch gibt es so die Möglichkeit schnell ohne weitere mal schnell ein 32 bit oder auch 64bit System aufzusetzen, ohne dass ich jedesmal das Image anpassen muss. So mache ich immer die Grundinstallation und die Patches werden über den WSUS nachgezogen.
Das getting Started und das Handbuch habe ich natürlich durchgelesen. Die Links, vor allen Dingen der letzte, den habe ich leider erst gefunden, nachdem ich die Frage gepostet hatte.
Trotzdem danke für die Antwort.
Ciao
Carsten
Natürlich gebe ich Dir recht, dass es sich eigentlich für 5 Rechner nicht lohnt, aber für mich ist es auch entscheident, dass meine Kollegen sich in meiner Abwesenheit die Rechner neu installieren können und ich trotzdem weiß, welche Software dort installiert ist. Auch gibt es so die Möglichkeit schnell ohne weitere mal schnell ein 32 bit oder auch 64bit System aufzusetzen, ohne dass ich jedesmal das Image anpassen muss. So mache ich immer die Grundinstallation und die Patches werden über den WSUS nachgezogen.
Das getting Started und das Handbuch habe ich natürlich durchgelesen. Die Links, vor allen Dingen der letzte, den habe ich leider erst gefunden, nachdem ich die Frage gepostet hatte.
Trotzdem danke für die Antwort.
Ciao
Carsten
Re: Office 2010 - Frage von absolutem Newbie
na gut ist natürlich deine Entscheidung
Anhand des Office Scriptes aus dem Wiki sollte das ganze relativ gut verständlich sein. Wichtig ist es halt WINST zu verstehen.
Dann ist WINST eine einfach zu nutzendes aber sehr mächtiges Werkzeug um Software zu installieren
Wenn du Fragen dazu hast frag ruhig wenns irgendwo klemmt.
Das Tutorial aus dem Getting Started zusammen mit dem WIKI sollte aber die meisten Fragen schon beantworten
Gruß
Tobias
Anhand des Office Scriptes aus dem Wiki sollte das ganze relativ gut verständlich sein. Wichtig ist es halt WINST zu verstehen.
Dann ist WINST eine einfach zu nutzendes aber sehr mächtiges Werkzeug um Software zu installieren
Wenn du Fragen dazu hast frag ruhig wenns irgendwo klemmt.
Das Tutorial aus dem Getting Started zusammen mit dem WIKI sollte aber die meisten Fragen schon beantworten
Gruß
Tobias
Re: Office 2010 - Frage von absolutem Newbie
Neben der grundsaetzlichen Einarbeitung in OPSI und die Winst-Steuersprache muss Office selbst vorbereitet werden, damit es bei Euch dann passt. Das ganze geht mit Optionen in der config.xml und/oder ueber eine MSP-Datei, die mit dem Anpassungsassistenten erstellt wird. Beide Optionen koennen kombiniert werden:
Vorbereitungen:
Vorbereitungen:
- Übersicht über alle Optionen bei Microsoft Technet: http://technet.microsoft.com/de-de/libr ... 79099.aspx
- Anpassen der Installaton mit setup.exe /admin, Änderungen als MSP-File speichern
- Zusätzliche Sprachen in ProPlus.WW\config.xml einbinden
- Aufruf der unbeaufsichtigten Installationsroutine mit setup.exe /adminfile <ADMINFILE> /config <CONFIGFILE> (komplette Pfade angeben!)
Re: Office 2010 - Frage von absolutem Newbie
Hallo
Habe natürlich das "getting started" Handbuch gelesen und habe versucht die Installation von Office mit Hilfe des scriptes aus der Sammlung zu realisieren. Leider hat das nicht so funktioniert, wie es sollte. Ich habe die Pfade und die License Keys angepasst, aber kein Erfolg. Leider werde ich aus dem LOG auch nicht so richtig schlau.
Vieleicht kann mir da mal jemand helfen.
Ich habe mal die Log Datei, die config.xml und die setup.ins angehängt. Falls noch mehr Infos benötigt werden, kann ich die natürlich jederzeit liefern.
Gruß
Carsten
Habe natürlich das "getting started" Handbuch gelesen und habe versucht die Installation von Office mit Hilfe des scriptes aus der Sammlung zu realisieren. Leider hat das nicht so funktioniert, wie es sollte. Ich habe die Pfade und die License Keys angepasst, aber kein Erfolg. Leider werde ich aus dem LOG auch nicht so richtig schlau.
Vieleicht kann mir da mal jemand helfen.
Ich habe mal die Log Datei, die config.xml und die setup.ins angehängt. Falls noch mehr Infos benötigt werden, kann ich die natürlich jederzeit liefern.
Gruß
Carsten
Re: Office 2010 - Frage von absolutem Newbie
Hallo nochmal
Ich bin auch nochmal dem Hinweis mit der Erstellung einer MSP Datei nachgegangen. Um setup.exe /admin ausführen zu können muss das OAT von Microsoft installiert sein. Dieses setzt jedoch eine Volumenlizenz zwingend voraus. Diese liegt jedoch nicht vor. Gibt es noch eine andere Möglichkeit, das Tool einzusetzen ?
Gruß
Carsten
Ich bin auch nochmal dem Hinweis mit der Erstellung einer MSP Datei nachgegangen. Um setup.exe /admin ausführen zu können muss das OAT von Microsoft installiert sein. Dieses setzt jedoch eine Volumenlizenz zwingend voraus. Diese liegt jedoch nicht vor. Gibt es noch eine andere Möglichkeit, das Tool einzusetzen ?
Gruß
Carsten
Re: Office 2010 - Frage von absolutem Newbie
Nein.
Was gehen sollte ist die Konfiguration über die config.xml
Gruss
Bardo Wolf
Was gehen sollte ist die Konfiguration über die config.xml
Gruss
Bardo Wolf
OPSICONF 2024
https://opsi.org/en/opsiconf/
Basisworkshop Mainz :
17. - 20. 06. 2024
opsi support - uib gmbh
For productive opsi installations we recommend maintainance + support contracts which are the base of opsi development.
http://www.uib.de
Re: Office 2010 - Frage von absolutem Newbie
Hallo
Nachdem ich nicht so richtig weiterkomme möchte ich mal den Auszug aus dem log file posten.
Vieleicht kann mir jemand einen Tipp geben, an welcher Schraube ich drehen muss.
[5] [24.04.2012 10:39:42] --
[5] [24.04.2012 10:39:42] --
[1] [24.04.2012 10:39:42] opsi-winst 4.11.2.5 started at >>24.04.2012 10:39:41
[1] [24.04.2012 10:39:42] startmessage winst created at CentralForm.FormCreate: 24.04.2012 10:39:41
[1] [24.04.2012 10:39:42] startmessage StartProgramModes and create log: 24.04.2012 10:39:41
[1] [24.04.2012 10:39:42] startmessage start opsi service connection: 24.04.2012 10:39:41
[1] [24.04.2012 10:39:42] startmessage create log: 24.04.2012 10:39:42
[6] [24.04.2012 10:39:42] JSON service request https://172.16.16.242:4447/rpc getDepotId
[6] [24.04.2012 10:39:42] JSON service request https://172.16.16.242:4447/rpc backend_setOptions
[6] [24.04.2012 10:39:42] JSON service request https://172.16.16.242:4447/rpc productOnClient_getObjects
[5] [24.04.2012 10:39:42] Computername:w000010.ovh.local
[5] [24.04.2012 10:39:42] Computername according to Environment Variable :W000010
[5] [24.04.2012 10:39:42] opsi service URL https://172.16.16.242:4447
[5] [24.04.2012 10:39:42] Depot path: p:\
[5] [24.04.2012 10:39:42]
[5] [24.04.2012 10:39:42] bootmode BKSTD
[5] [24.04.2012 10:39:42] ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[5] [24.04.2012 10:39:42] Resolved sequence of products (24.04.2012 10:39:42):
[5] [24.04.2012 10:39:42] Product 5 office2010engl64bit : setup
[5] [24.04.2012 10:39:42] ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[6] [24.04.2012 10:39:42] JSON service request https://172.16.16.242:4447/rpc getProductProperties_hash
[6] [24.04.2012 10:39:42] JSON service request https://172.16.16.242:4447/rpc getProduct_hash
[6] [24.04.2012 10:39:42] JSON service request https://172.16.16.242:4447/rpc productOnClient_getObjects
[5] [24.04.2012 10:39:43] scriptname: "setup.ins", special path: "p:\office2010engl64bit\"
[6] [24.04.2012 10:39:43] JSON service request https://172.16.16.242:4447/rpc productOnClient_updateObject
[1] [24.04.2012 10:39:43]
[1] [24.04.2012 10:39:43] ============ Version 4.11.2.5 WIN32 script "p:\office2010engl64bit\setup.ins"
[1] [24.04.2012 10:39:43] start: 2012-04-24 10:39:43
[1] [24.04.2012 10:39:43] on client named "w000010.ovh.local"
[1] [24.04.2012 10:39:43] loggedin user ""
[1] [24.04.2012 10:39:43] winst running as "SYSTEM"
[1] [24.04.2012 10:39:43] winst running with admin privileges
[1] [24.04.2012 10:39:43] winst running in standard script mode
[1] [24.04.2012 10:39:43] [executing: "C:\Program Files (x86)\opsi.org\opsi-client-agent\opsi-winst\winst32.exe"]
[1] [24.04.2012 10:39:43] system infos:
[1] [24.04.2012 10:39:43] 00-0C-29-C7-E5-44 - PC hardware address
[1] [24.04.2012 10:39:43] w000010 - IP name
[1] [24.04.2012 10:39:43] 172.16.16.97 - IP address
[1] [24.04.2012 10:39:43] DEU - System default locale
[1] [24.04.2012 10:39:43] MS Windowds 6.1 64 Bit
[1] [24.04.2012 10:39:43] opsi service version : 4
[1] [24.04.2012 10:39:43]
[6] [24.04.2012 10:39:43] Registry key [HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion] opened
[6] [24.04.2012 10:39:43] Key closed
[1] [24.04.2012 10:39:43] LogLevel was 6
[1] [24.04.2012 10:39:43] LogLevel set to 9
[6] [24.04.2012 10:39:43] wInst has version 4.11.2.5, required is : >= 4.10.8.6
[5] [24.04.2012 10:39:43]
[5] [24.04.2012 10:39:43] Set $INST_SystemType$ = GetSystemType
[6] [24.04.2012 10:39:43] The value of the variable "$INST_SystemType$" is now: "64 Bit System"
[5] [24.04.2012 10:39:43]
[5] [24.04.2012 10:39:43] Set $INST_architecture$ = GetProductProperty("install_architecture","system specific")
[6] [24.04.2012 10:39:43] The value of the variable "$INST_architecture$" is now: "system specific"
[5] [24.04.2012 10:39:43]
[5] [24.04.2012 10:39:43] Set $LogDir$ = "C:\tmp"
[6] [24.04.2012 10:39:43] The value of the variable "$LogDir$" is now: "C:\tmp"
[5] [24.04.2012 10:39:43]
[5] [24.04.2012 10:39:43] Set $ProductId$ = "Microsoft Office 2010 Professional Plus english(64 Bit)"
[6] [24.04.2012 10:39:43] The value of the variable "$ProductId$" is now: "Microsoft Office 2010 Professional Plus english(64 Bit)"
[5] [24.04.2012 10:39:43]
[5] [24.04.2012 10:39:43] Set $Version$ = "2010"
[6] [24.04.2012 10:39:43] The value of the variable "$Version$" is now: "2010"
[5] [24.04.2012 10:39:43]
[5] [24.04.2012 10:39:43] Set $MinimumSpace$ = "30 MB"
[6] [24.04.2012 10:39:43] The value of the variable "$MinimumSpace$" is now: "30 MB"
[5] [24.04.2012 10:39:43]
[5] [24.04.2012 10:39:43] Set $InstallDir32$ = "C:\Program Files (x86)\Microsoft Office"
[6] [24.04.2012 10:39:43] The value of the variable "$InstallDir32$" is now: "C:\Program Files (x86)\Microsoft Office"
[5] [24.04.2012 10:39:43]
[5] [24.04.2012 10:39:43] Set $InstallDir64$ = "C:\Program Files\Microsoft Office"
[6] [24.04.2012 10:39:43] The value of the variable "$InstallDir64$" is now: "C:\Program Files\Microsoft Office"
[5] [24.04.2012 10:39:43]
[5] [24.04.2012 10:39:43] Set $LicenseRequired$ = "false"
[6] [24.04.2012 10:39:43] The value of the variable "$LicenseRequired$" is now: "false"
[5] [24.04.2012 10:39:43]
[5] [24.04.2012 10:39:43] Set $LicensePool$ = "p_" + $ProductId$
[6] [24.04.2012 10:39:43] The value of the variable "$LicensePool$" is now: "p_Microsoft Office 2010 Professional Plus english(64 Bit)"
[5] [24.04.2012 10:39:43]
[5] [24.04.2012 10:39:43] Set $Inst_Prg$ = "setup.exe"
[6] [24.04.2012 10:39:43] The value of the variable "$Inst_Prg$" is now: "setup.exe"
[5] [24.04.2012 10:39:43]
[5] [24.04.2012 10:39:43] Set $Inst_Cmd64$ = '/config'
[6] [24.04.2012 10:39:43] The value of the variable "$Inst_Cmd64$" is now: "/config"
[5] [24.04.2012 10:39:43]
[5] [24.04.2012 10:39:43] Set $Uninst_Cmd$ = ""
[6] [24.04.2012 10:39:43] The value of the variable "$Uninst_Cmd$" is now: ""
[5] [24.04.2012 10:39:43]
[5] [24.04.2012 10:39:43] Set $Uninst_Prg$ = ""
[6] [24.04.2012 10:39:43] The value of the variable "$Uninst_Prg$" is now: ""
[5] [24.04.2012 10:39:43]
[5] [24.04.2012 10:39:43] If
[6] [24.04.2012 10:39:43] Free on Disk C:: 28.444.696.576 bytes This is more than the required amount of 30.000.000 bytes
[5] [24.04.2012 10:39:43] HasMinimumSpace ("C:", $MinimumSpace$) <<< result true
[5] [24.04.2012 10:39:43] not(HasMinimumSpace ("C:", $MinimumSpace$)) <<< result false
[5] [24.04.2012 10:39:43] Then
[5] [24.04.2012 10:39:43]
[5] [24.04.2012 10:39:43] Else
[5] [24.04.2012 10:39:43] comment: Show product picture
[5] [24.04.2012 10:39:43]
[5] [24.04.2012 10:39:43] If
[5] [24.04.2012 10:39:43] $LicenseRequired$ = "true" <<< result false
[5] [24.04.2012 10:39:43] Then
[5] [24.04.2012 10:39:43] EndIf
[5] [24.04.2012 10:39:43] comment: Installiere Microsoft Office 2010 Professional Plus english (64 Bit)...
[5] [24.04.2012 10:39:43]
[5] [24.04.2012 10:39:43] If
[5] [24.04.2012 10:39:43] $INST_SystemType$ = "x86 System" <<< result false
[5] [24.04.2012 10:39:43] $INST_architecture$ = "system specific" <<< result true
[5] [24.04.2012 10:39:43] ($INST_architecture$ = "system specific") <<< result true
[5] [24.04.2012 10:39:43] ($INST_SystemType$ = "x86 System") and ($INST_architecture$ = "system specific") <<< result false
[5] [24.04.2012 10:39:43] $INST_architecture$ = "both" <<< result false
[5] [24.04.2012 10:39:43] $INST_architecture$ = "32 only" <<< result false
[5] [24.04.2012 10:39:43] ($INST_architecture$ = "32 only") <<< result false
[5] [24.04.2012 10:39:43] ($INST_architecture$ = "both") or ($INST_architecture$ = "32 only") <<< result false
[5] [24.04.2012 10:39:43] (($INST_SystemType$ = "x86 System") and ($INST_architecture$ = "system specific")) or ($INST_architecture$ = "both") or ($INST_architecture$ = "32 only") <<< result false
[5] [24.04.2012 10:39:43] Then
[5] [24.04.2012 10:39:43] EndIf
[5] [24.04.2012 10:39:43]
[5] [24.04.2012 10:39:43] If
[5] [24.04.2012 10:39:43] $INST_SystemType$ = "64 Bit System" <<< result true
[5] [24.04.2012 10:39:43] $INST_architecture$ = "system specific" <<< result true
[5] [24.04.2012 10:39:43] $INST_architecture$ = "both" <<< result false
[5] [24.04.2012 10:39:43] $INST_architecture$ = "64 only" <<< result false
[5] [24.04.2012 10:39:43] ($INST_architecture$ = "64 only") <<< result false
[5] [24.04.2012 10:39:43] ($INST_architecture$ = "both") or ($INST_architecture$ = "64 only") <<< result false
[5] [24.04.2012 10:39:43] ($INST_architecture$ = "system specific") or ($INST_architecture$ = "both") or ($INST_architecture$ = "64 only") <<< result true
[5] [24.04.2012 10:39:43] (($INST_architecture$ = "system specific") or ($INST_architecture$ = "both") or ($INST_architecture$ = "64 only")) <<< result true
[5] [24.04.2012 10:39:43] ($INST_SystemType$ = "64 Bit System") and (($INST_architecture$ = "system specific") or ($INST_architecture$ = "both") or ($INST_architecture$ = "64 only")) <<< result true
[5] [24.04.2012 10:39:43] Then
[5] [24.04.2012 10:39:43] message Installiere Microsoft Office 2010 Professional Plus english(64 Bit). Das kann etwas laenger dauern, bitte Geduld...
[5] [24.04.2012 10:39:43] comment: Start setup program
[5] [24.04.2012 10:39:43]
[5] [24.04.2012 10:39:43] Execution of Winbatch_install_64
[6] [24.04.2012 10:39:43] Call "P:\office2010engl64bit\setup.exe /config "P:\office2010engl64bit\ProPlus.WW\config.xml""
[6] [24.04.2012 10:39:43] Waiting until the called process is finished
[7] [24.04.2012 10:39:44] Waiting for ending at 24.04.2012 10:39:44 exitcode is: 259
[7] [24.04.2012 10:39:45] Waiting for ending at 24.04.2012 10:39:45 exitcode is: 259
[7] [24.04.2012 10:39:46] Waiting for ending at 24.04.2012 10:39:46 exitcode is: 30086
[8] [24.04.2012 10:39:46] Process terminated at: 24.04.2012 10:39:46 exitcode is: 30086
[6] [24.04.2012 10:39:46] ExitCode 30086 Executed process "P:\office2010engl64bit\setup.exe /config "P:\office2010engl64bit\ProPlus.WW\config.xml""
[5] [24.04.2012 10:39:46]
[5] [24.04.2012 10:39:46] Execution of Files_delete_64
[7] [24.04.2012 10:39:46] delete /s "C:\Program Files\Microsoft Office\*.*"
[8] [24.04.2012 10:39:46] we try to delete: /s "C:\Program Files\Microsoft Office\*.*"
[6] [24.04.2012 10:39:46] Delete "/s "C:\Program Files\Microsoft Office\*.*""
[5] [24.04.2012 10:39:46] Notice: Directory /s "C:\Program Files\Microsoft Office\ does not exist, nothing deleted
[6] [24.04.2012 10:39:46]
[6] [24.04.2012 10:39:46] ~~~~~~~ Start Sub ~~~~~~~ Sub_check_exitcode
[5] [24.04.2012 10:39:46] comment: Test for installation success via exit code
[5] [24.04.2012 10:39:46]
[5] [24.04.2012 10:39:46] Set $ExitCode$ = getLastExitCode
[6] [24.04.2012 10:39:46] The value of the variable "$ExitCode$" is now: "30086"
[5] [24.04.2012 10:39:46]
[5] [24.04.2012 10:39:46] If
[5] [24.04.2012 10:39:46] $ExitCode$ = "0" <<< result false
[5] [24.04.2012 10:39:46] ($ExitCode$ = "0") <<< result false
[5] [24.04.2012 10:39:46] Then
[5] [24.04.2012 10:39:46]
[5] [24.04.2012 10:39:46] Else
[5] [24.04.2012 10:39:46] comment: Setup program gives a exitcode unequal zero: 30086
[5] [24.04.2012 10:39:46]
[5] [24.04.2012 10:39:46] If
[5] [24.04.2012 10:39:46] $ExitCode$ = "1605" <<< result false
[5] [24.04.2012 10:39:46] ($ExitCode$ = "1605") <<< result false
[5] [24.04.2012 10:39:46] Then
[5] [24.04.2012 10:39:46]
[5] [24.04.2012 10:39:46] Else
[5] [24.04.2012 10:39:46]
[5] [24.04.2012 10:39:46] If
[5] [24.04.2012 10:39:46] $ExitCode$ = "1641" <<< result false
[5] [24.04.2012 10:39:46] ($ExitCode$ = "1641") <<< result false
[5] [24.04.2012 10:39:46] Then
[5] [24.04.2012 10:39:46]
[5] [24.04.2012 10:39:46] Else
[5] [24.04.2012 10:39:46]
[5] [24.04.2012 10:39:46] If
[5] [24.04.2012 10:39:46] $ExitCode$ = "3010" <<< result false
[5] [24.04.2012 10:39:46] ($ExitCode$ = "3010") <<< result false
[5] [24.04.2012 10:39:46] Then
[5] [24.04.2012 10:39:46]
[5] [24.04.2012 10:39:46] Else
[3] [24.04.2012 10:39:46] Error: Fatal: Setup program gives an unknown exitcode unequal zero: 30086
[5] [24.04.2012 10:39:46] Error level set to fatal
[5] [24.04.2012 10:39:46] Process aborted
[6] [24.04.2012 10:39:46]
[6] [24.04.2012 10:39:46] ~~~~~~~ End Sub ~~~~~~~ Sub_check_exitcode
[6] [24.04.2012 10:39:46]
[5] [24.04.2012 10:39:46] Process aborted
[1] [24.04.2012 10:39:46] ___________________
[1] [24.04.2012 10:39:46] script finished
[1] [24.04.2012 10:39:46] 1 error
[1] [24.04.2012 10:39:46] 0 warnings
[1] [24.04.2012 10:39:46]
[1] [24.04.2012 10:39:46] installed Produkt: office2010engl64bit Version: 2010-1
[1] [24.04.2012 10:39:46]
[6] [24.04.2012 10:39:46] Delete "c:\opsi.org\tmp\_winstbat_*"
[6] [24.04.2012 10:39:46] Search "c:\opsi.org\tmp\"
[8] [24.04.2012 10:39:46] Temp bat files deleted, next: free script
[8] [24.04.2012 10:39:46] End of CreateAndProcessScript
[8] [24.04.2012 10:39:46] After CreateAndProcessScript
[8] [24.04.2012 10:39:46] End ProcessNonZeroScript
[8] [24.04.2012 10:39:46] First ProcessNonZeroScript finished
[8] [24.04.2012 10:39:46] Parameters in OpsiMethodCall: office2010engl64bit
[8] [24.04.2012 10:39:46] Parameters in OpsiMethodCall: w000010.ovh.local
[8] [24.04.2012 10:39:46] Parameters in OpsiMethodCall: update
[8] [24.04.2012 10:39:46] Putting to TSuperArray with: "office2010engl64bit"
[8] [24.04.2012 10:39:46] Putting to TSuperArray with: "w000010.ovh.local"
[8] [24.04.2012 10:39:46] Putting to TSuperArray with: "update"
[8] [24.04.2012 10:39:46] got omc.jsonUrlString: {"method":"setProductActionRequest","params":["office2010engl64bit","w000010.ovh.local","update"],"id":1}
[8] [24.04.2012 10:39:46] Putting to TSuperArray with: "office2010engl64bit"
[8] [24.04.2012 10:39:46] Putting to TSuperArray with: "w000010.ovh.local"
[8] [24.04.2012 10:39:46] Putting to TSuperArray with: "update"
[8] [24.04.2012 10:39:46] got omc.jsonUrlString: {"method":"setProductActionRequest","params":["office2010engl64bit","w000010.ovh.local","update"],"id":1}
[8] [24.04.2012 10:39:46] got Furl: https://172.16.16.242:4447/rpc
[6] [24.04.2012 10:39:46] JSON service request https://172.16.16.242:4447/rpc setProductActionRequest
[8] [24.04.2012 10:39:46] Putting to TSuperArray with: "office2010engl64bit"
[8] [24.04.2012 10:39:46] Putting to TSuperArray with: "w000010.ovh.local"
[8] [24.04.2012 10:39:46] Putting to TSuperArray with: "update"
[8] [24.04.2012 10:39:46] JSON service request Furlhttps://172.16.16.242:4447/rpc
[8] [24.04.2012 10:39:46] JSON service request str{"method":"setProductActionRequest","params":["office2010engl64bit","w000010.ovh.local","update"],"id":1}
[1] [24.04.2012 10:39:46] product "office2010engl64bit set to update
[8] [24.04.2012 10:39:46] get Update script name ...
[8] [24.04.2012 10:39:46] Update script name:
[1] [24.04.2012 10:39:46] Update script name:
[8] [24.04.2012 10:39:46] Start ProcessNonZeroScript
[5] [24.04.2012 10:39:46] no script file name given
[8] [24.04.2012 10:39:46] End ProcessNonZeroScript
[1] [24.04.2012 10:39:46] we have no update script
[8] [24.04.2012 10:39:46] In opsi4data.UpdateSwitches, Actionstr: setup
[8] [24.04.2012 10:39:46] Parameters in OpsiMethodCall: {"clientId":"w000010.ovh.local","actionResult":"failed","installationStatus":"unknown","actionRequest":"none","packageVersion":"1","ident":"office2010engl64bit;LocalbootProduct;w000010.ovh.local","productType":"LocalbootProduct","lastAction":"setup","productVersion":"2010","modificationTime":null,"productId":"office2010engl64bit","actionProgress":"","type":"ProductOnClient","targetConfiguration":"installed","actionSequence":null}
[8] [24.04.2012 10:39:46] Creating TSuperObject with: {"clientId":"w000010.ovh.local","actionResult":"failed","installationStatus":"unknown","actionRequest":"none","packageVersion":"1","ident":"office2010engl64bit;LocalbootProduct;w000010.ovh.local","productType":"LocalbootProduct","lastAction":"setup","productVersion":"2010","modificationTime":null,"productId":"office2010engl64bit","actionProgress":"","type":"ProductOnClient","targetConfiguration":"installed","actionSequence":null}
[8] [24.04.2012 10:39:46] got omc.jsonUrlString: {"method":"productOnClient_updateObject","params":[{"clientId":"w000010.ovh.local","actionResult":"failed","installationStatus":"unknown","actionRequest":"none","packageVersion":"1","ident":"office2010engl64bit;LocalbootProduct;w000010.ovh.local","productType":"LocalbootProduct","lastAction":"setup","productVersion":"2010","modificationTime":null,"productId":"office2010engl64bit","actionProgress":"","type":"ProductOnClient","targetConfiguration":"installed","actionSequence":null}],"id":1}
[8] [24.04.2012 10:39:46] Creating TSuperObject with: {"clientId":"w000010.ovh.local","actionResult":"failed","installationStatus":"unknown","actionRequest":"none","packageVersion":"1","ident":"office2010engl64bit;LocalbootProduct;w000010.ovh.local","productType":"LocalbootProduct","lastAction":"setup","productVersion":"2010","modificationTime":null,"productId":"office2010engl64bit","actionProgress":"","type":"ProductOnClient","targetConfiguration":"installed","actionSequence":null}
[8] [24.04.2012 10:39:46] got omc.jsonUrlString: {"method":"productOnClient_updateObject","params":[{"clientId":"w000010.ovh.local","actionResult":"failed","installationStatus":"unknown","actionRequest":"none","packageVersion":"1","ident":"office2010engl64bit;LocalbootProduct;w000010.ovh.local","productType":"LocalbootProduct","lastAction":"setup","productVersion":"2010","modificationTime":null,"productId":"office2010engl64bit","actionProgress":"","type":"ProductOnClient","targetConfiguration":"installed","actionSequence":null}],"id":1}
[8] [24.04.2012 10:39:46] got Furl: https://172.16.16.242:4447/rpc
[6] [24.04.2012 10:39:46] JSON service request https://172.16.16.242:4447/rpc productOnClient_updateObject
[8] [24.04.2012 10:39:46] Creating TSuperObject with: {"clientId":"w000010.ovh.local","actionResult":"failed","installationStatus":"unknown","actionRequest":"none","packageVersion":"1","ident":"office2010engl64bit;LocalbootProduct;w000010.ovh.local","productType":"LocalbootProduct","lastAction":"setup","productVersion":"2010","modificationTime":null,"productId":"office2010engl64bit","actionProgress":"","type":"ProductOnClient","targetConfiguration":"installed","actionSequence":null}
[8] [24.04.2012 10:39:46] JSON service request Furlhttps://172.16.16.242:4447/rpc
[8] [24.04.2012 10:39:46] JSON service request str{"method":"productOnClient_updateObject","params":[{"clientId":"w000010.ovh.local","actionResult":"failed","installationStatus":"unknown","actionRequest":"none","packageVersion":"1","ident":"office2010engl64bit;LocalbootProduct;w000010.ovh.local","productType":"LocalbootProduct","lastAction":"setup","productVersion":"2010","modificationTime":null,"productId":"office2010engl64bit","actionProgress":"","type":"ProductOnClient","targetConfiguration":"installed","actionSequence":null}],"id":1}
[7] [24.04.2012 10:39:46] Registry started with redirection (32 Bit)
[6] [24.04.2012 10:39:46] Registry key [HKLM\SOFTWARE\opsi.org\winst] opened
[6] [24.04.2012 10:39:46] Variable "RebootRequested" is keeping its value "0"
[6] [24.04.2012 10:39:46] Variable "LastLogFilename" is keeping its value "c:\tmp\instlog.txt"
[6] [24.04.2012 10:39:46] Variable "ContinueLogFile" is keeping its value "0"
[6] [24.04.2012 10:39:46] Variable "NumberOfErrors" is keeping its value "0"
[6] [24.04.2012 10:39:46] Key flushed
[6] [24.04.2012 10:39:46] Key closed
Im voraus vielen Dank.
Carsten
Nachdem ich nicht so richtig weiterkomme möchte ich mal den Auszug aus dem log file posten.
Vieleicht kann mir jemand einen Tipp geben, an welcher Schraube ich drehen muss.
[5] [24.04.2012 10:39:42] --
[5] [24.04.2012 10:39:42] --
[1] [24.04.2012 10:39:42] opsi-winst 4.11.2.5 started at >>24.04.2012 10:39:41
[1] [24.04.2012 10:39:42] startmessage winst created at CentralForm.FormCreate: 24.04.2012 10:39:41
[1] [24.04.2012 10:39:42] startmessage StartProgramModes and create log: 24.04.2012 10:39:41
[1] [24.04.2012 10:39:42] startmessage start opsi service connection: 24.04.2012 10:39:41
[1] [24.04.2012 10:39:42] startmessage create log: 24.04.2012 10:39:42
[6] [24.04.2012 10:39:42] JSON service request https://172.16.16.242:4447/rpc getDepotId
[6] [24.04.2012 10:39:42] JSON service request https://172.16.16.242:4447/rpc backend_setOptions
[6] [24.04.2012 10:39:42] JSON service request https://172.16.16.242:4447/rpc productOnClient_getObjects
[5] [24.04.2012 10:39:42] Computername:w000010.ovh.local
[5] [24.04.2012 10:39:42] Computername according to Environment Variable :W000010
[5] [24.04.2012 10:39:42] opsi service URL https://172.16.16.242:4447
[5] [24.04.2012 10:39:42] Depot path: p:\
[5] [24.04.2012 10:39:42]
[5] [24.04.2012 10:39:42] bootmode BKSTD
[5] [24.04.2012 10:39:42] ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[5] [24.04.2012 10:39:42] Resolved sequence of products (24.04.2012 10:39:42):
[5] [24.04.2012 10:39:42] Product 5 office2010engl64bit : setup
[5] [24.04.2012 10:39:42] ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[6] [24.04.2012 10:39:42] JSON service request https://172.16.16.242:4447/rpc getProductProperties_hash
[6] [24.04.2012 10:39:42] JSON service request https://172.16.16.242:4447/rpc getProduct_hash
[6] [24.04.2012 10:39:42] JSON service request https://172.16.16.242:4447/rpc productOnClient_getObjects
[5] [24.04.2012 10:39:43] scriptname: "setup.ins", special path: "p:\office2010engl64bit\"
[6] [24.04.2012 10:39:43] JSON service request https://172.16.16.242:4447/rpc productOnClient_updateObject
[1] [24.04.2012 10:39:43]
[1] [24.04.2012 10:39:43] ============ Version 4.11.2.5 WIN32 script "p:\office2010engl64bit\setup.ins"
[1] [24.04.2012 10:39:43] start: 2012-04-24 10:39:43
[1] [24.04.2012 10:39:43] on client named "w000010.ovh.local"
[1] [24.04.2012 10:39:43] loggedin user ""
[1] [24.04.2012 10:39:43] winst running as "SYSTEM"
[1] [24.04.2012 10:39:43] winst running with admin privileges
[1] [24.04.2012 10:39:43] winst running in standard script mode
[1] [24.04.2012 10:39:43] [executing: "C:\Program Files (x86)\opsi.org\opsi-client-agent\opsi-winst\winst32.exe"]
[1] [24.04.2012 10:39:43] system infos:
[1] [24.04.2012 10:39:43] 00-0C-29-C7-E5-44 - PC hardware address
[1] [24.04.2012 10:39:43] w000010 - IP name
[1] [24.04.2012 10:39:43] 172.16.16.97 - IP address
[1] [24.04.2012 10:39:43] DEU - System default locale
[1] [24.04.2012 10:39:43] MS Windowds 6.1 64 Bit
[1] [24.04.2012 10:39:43] opsi service version : 4
[1] [24.04.2012 10:39:43]
[6] [24.04.2012 10:39:43] Registry key [HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion] opened
[6] [24.04.2012 10:39:43] Key closed
[1] [24.04.2012 10:39:43] LogLevel was 6
[1] [24.04.2012 10:39:43] LogLevel set to 9
[6] [24.04.2012 10:39:43] wInst has version 4.11.2.5, required is : >= 4.10.8.6
[5] [24.04.2012 10:39:43]
[5] [24.04.2012 10:39:43] Set $INST_SystemType$ = GetSystemType
[6] [24.04.2012 10:39:43] The value of the variable "$INST_SystemType$" is now: "64 Bit System"
[5] [24.04.2012 10:39:43]
[5] [24.04.2012 10:39:43] Set $INST_architecture$ = GetProductProperty("install_architecture","system specific")
[6] [24.04.2012 10:39:43] The value of the variable "$INST_architecture$" is now: "system specific"
[5] [24.04.2012 10:39:43]
[5] [24.04.2012 10:39:43] Set $LogDir$ = "C:\tmp"
[6] [24.04.2012 10:39:43] The value of the variable "$LogDir$" is now: "C:\tmp"
[5] [24.04.2012 10:39:43]
[5] [24.04.2012 10:39:43] Set $ProductId$ = "Microsoft Office 2010 Professional Plus english(64 Bit)"
[6] [24.04.2012 10:39:43] The value of the variable "$ProductId$" is now: "Microsoft Office 2010 Professional Plus english(64 Bit)"
[5] [24.04.2012 10:39:43]
[5] [24.04.2012 10:39:43] Set $Version$ = "2010"
[6] [24.04.2012 10:39:43] The value of the variable "$Version$" is now: "2010"
[5] [24.04.2012 10:39:43]
[5] [24.04.2012 10:39:43] Set $MinimumSpace$ = "30 MB"
[6] [24.04.2012 10:39:43] The value of the variable "$MinimumSpace$" is now: "30 MB"
[5] [24.04.2012 10:39:43]
[5] [24.04.2012 10:39:43] Set $InstallDir32$ = "C:\Program Files (x86)\Microsoft Office"
[6] [24.04.2012 10:39:43] The value of the variable "$InstallDir32$" is now: "C:\Program Files (x86)\Microsoft Office"
[5] [24.04.2012 10:39:43]
[5] [24.04.2012 10:39:43] Set $InstallDir64$ = "C:\Program Files\Microsoft Office"
[6] [24.04.2012 10:39:43] The value of the variable "$InstallDir64$" is now: "C:\Program Files\Microsoft Office"
[5] [24.04.2012 10:39:43]
[5] [24.04.2012 10:39:43] Set $LicenseRequired$ = "false"
[6] [24.04.2012 10:39:43] The value of the variable "$LicenseRequired$" is now: "false"
[5] [24.04.2012 10:39:43]
[5] [24.04.2012 10:39:43] Set $LicensePool$ = "p_" + $ProductId$
[6] [24.04.2012 10:39:43] The value of the variable "$LicensePool$" is now: "p_Microsoft Office 2010 Professional Plus english(64 Bit)"
[5] [24.04.2012 10:39:43]
[5] [24.04.2012 10:39:43] Set $Inst_Prg$ = "setup.exe"
[6] [24.04.2012 10:39:43] The value of the variable "$Inst_Prg$" is now: "setup.exe"
[5] [24.04.2012 10:39:43]
[5] [24.04.2012 10:39:43] Set $Inst_Cmd64$ = '/config'
[6] [24.04.2012 10:39:43] The value of the variable "$Inst_Cmd64$" is now: "/config"
[5] [24.04.2012 10:39:43]
[5] [24.04.2012 10:39:43] Set $Uninst_Cmd$ = ""
[6] [24.04.2012 10:39:43] The value of the variable "$Uninst_Cmd$" is now: ""
[5] [24.04.2012 10:39:43]
[5] [24.04.2012 10:39:43] Set $Uninst_Prg$ = ""
[6] [24.04.2012 10:39:43] The value of the variable "$Uninst_Prg$" is now: ""
[5] [24.04.2012 10:39:43]
[5] [24.04.2012 10:39:43] If
[6] [24.04.2012 10:39:43] Free on Disk C:: 28.444.696.576 bytes This is more than the required amount of 30.000.000 bytes
[5] [24.04.2012 10:39:43] HasMinimumSpace ("C:", $MinimumSpace$) <<< result true
[5] [24.04.2012 10:39:43] not(HasMinimumSpace ("C:", $MinimumSpace$)) <<< result false
[5] [24.04.2012 10:39:43] Then
[5] [24.04.2012 10:39:43]
[5] [24.04.2012 10:39:43] Else
[5] [24.04.2012 10:39:43] comment: Show product picture
[5] [24.04.2012 10:39:43]
[5] [24.04.2012 10:39:43] If
[5] [24.04.2012 10:39:43] $LicenseRequired$ = "true" <<< result false
[5] [24.04.2012 10:39:43] Then
[5] [24.04.2012 10:39:43] EndIf
[5] [24.04.2012 10:39:43] comment: Installiere Microsoft Office 2010 Professional Plus english (64 Bit)...
[5] [24.04.2012 10:39:43]
[5] [24.04.2012 10:39:43] If
[5] [24.04.2012 10:39:43] $INST_SystemType$ = "x86 System" <<< result false
[5] [24.04.2012 10:39:43] $INST_architecture$ = "system specific" <<< result true
[5] [24.04.2012 10:39:43] ($INST_architecture$ = "system specific") <<< result true
[5] [24.04.2012 10:39:43] ($INST_SystemType$ = "x86 System") and ($INST_architecture$ = "system specific") <<< result false
[5] [24.04.2012 10:39:43] $INST_architecture$ = "both" <<< result false
[5] [24.04.2012 10:39:43] $INST_architecture$ = "32 only" <<< result false
[5] [24.04.2012 10:39:43] ($INST_architecture$ = "32 only") <<< result false
[5] [24.04.2012 10:39:43] ($INST_architecture$ = "both") or ($INST_architecture$ = "32 only") <<< result false
[5] [24.04.2012 10:39:43] (($INST_SystemType$ = "x86 System") and ($INST_architecture$ = "system specific")) or ($INST_architecture$ = "both") or ($INST_architecture$ = "32 only") <<< result false
[5] [24.04.2012 10:39:43] Then
[5] [24.04.2012 10:39:43] EndIf
[5] [24.04.2012 10:39:43]
[5] [24.04.2012 10:39:43] If
[5] [24.04.2012 10:39:43] $INST_SystemType$ = "64 Bit System" <<< result true
[5] [24.04.2012 10:39:43] $INST_architecture$ = "system specific" <<< result true
[5] [24.04.2012 10:39:43] $INST_architecture$ = "both" <<< result false
[5] [24.04.2012 10:39:43] $INST_architecture$ = "64 only" <<< result false
[5] [24.04.2012 10:39:43] ($INST_architecture$ = "64 only") <<< result false
[5] [24.04.2012 10:39:43] ($INST_architecture$ = "both") or ($INST_architecture$ = "64 only") <<< result false
[5] [24.04.2012 10:39:43] ($INST_architecture$ = "system specific") or ($INST_architecture$ = "both") or ($INST_architecture$ = "64 only") <<< result true
[5] [24.04.2012 10:39:43] (($INST_architecture$ = "system specific") or ($INST_architecture$ = "both") or ($INST_architecture$ = "64 only")) <<< result true
[5] [24.04.2012 10:39:43] ($INST_SystemType$ = "64 Bit System") and (($INST_architecture$ = "system specific") or ($INST_architecture$ = "both") or ($INST_architecture$ = "64 only")) <<< result true
[5] [24.04.2012 10:39:43] Then
[5] [24.04.2012 10:39:43] message Installiere Microsoft Office 2010 Professional Plus english(64 Bit). Das kann etwas laenger dauern, bitte Geduld...
[5] [24.04.2012 10:39:43] comment: Start setup program
[5] [24.04.2012 10:39:43]
[5] [24.04.2012 10:39:43] Execution of Winbatch_install_64
[6] [24.04.2012 10:39:43] Call "P:\office2010engl64bit\setup.exe /config "P:\office2010engl64bit\ProPlus.WW\config.xml""
[6] [24.04.2012 10:39:43] Waiting until the called process is finished
[7] [24.04.2012 10:39:44] Waiting for ending at 24.04.2012 10:39:44 exitcode is: 259
[7] [24.04.2012 10:39:45] Waiting for ending at 24.04.2012 10:39:45 exitcode is: 259
[7] [24.04.2012 10:39:46] Waiting for ending at 24.04.2012 10:39:46 exitcode is: 30086
[8] [24.04.2012 10:39:46] Process terminated at: 24.04.2012 10:39:46 exitcode is: 30086
[6] [24.04.2012 10:39:46] ExitCode 30086 Executed process "P:\office2010engl64bit\setup.exe /config "P:\office2010engl64bit\ProPlus.WW\config.xml""
[5] [24.04.2012 10:39:46]
[5] [24.04.2012 10:39:46] Execution of Files_delete_64
[7] [24.04.2012 10:39:46] delete /s "C:\Program Files\Microsoft Office\*.*"
[8] [24.04.2012 10:39:46] we try to delete: /s "C:\Program Files\Microsoft Office\*.*"
[6] [24.04.2012 10:39:46] Delete "/s "C:\Program Files\Microsoft Office\*.*""
[5] [24.04.2012 10:39:46] Notice: Directory /s "C:\Program Files\Microsoft Office\ does not exist, nothing deleted
[6] [24.04.2012 10:39:46]
[6] [24.04.2012 10:39:46] ~~~~~~~ Start Sub ~~~~~~~ Sub_check_exitcode
[5] [24.04.2012 10:39:46] comment: Test for installation success via exit code
[5] [24.04.2012 10:39:46]
[5] [24.04.2012 10:39:46] Set $ExitCode$ = getLastExitCode
[6] [24.04.2012 10:39:46] The value of the variable "$ExitCode$" is now: "30086"
[5] [24.04.2012 10:39:46]
[5] [24.04.2012 10:39:46] If
[5] [24.04.2012 10:39:46] $ExitCode$ = "0" <<< result false
[5] [24.04.2012 10:39:46] ($ExitCode$ = "0") <<< result false
[5] [24.04.2012 10:39:46] Then
[5] [24.04.2012 10:39:46]
[5] [24.04.2012 10:39:46] Else
[5] [24.04.2012 10:39:46] comment: Setup program gives a exitcode unequal zero: 30086
[5] [24.04.2012 10:39:46]
[5] [24.04.2012 10:39:46] If
[5] [24.04.2012 10:39:46] $ExitCode$ = "1605" <<< result false
[5] [24.04.2012 10:39:46] ($ExitCode$ = "1605") <<< result false
[5] [24.04.2012 10:39:46] Then
[5] [24.04.2012 10:39:46]
[5] [24.04.2012 10:39:46] Else
[5] [24.04.2012 10:39:46]
[5] [24.04.2012 10:39:46] If
[5] [24.04.2012 10:39:46] $ExitCode$ = "1641" <<< result false
[5] [24.04.2012 10:39:46] ($ExitCode$ = "1641") <<< result false
[5] [24.04.2012 10:39:46] Then
[5] [24.04.2012 10:39:46]
[5] [24.04.2012 10:39:46] Else
[5] [24.04.2012 10:39:46]
[5] [24.04.2012 10:39:46] If
[5] [24.04.2012 10:39:46] $ExitCode$ = "3010" <<< result false
[5] [24.04.2012 10:39:46] ($ExitCode$ = "3010") <<< result false
[5] [24.04.2012 10:39:46] Then
[5] [24.04.2012 10:39:46]
[5] [24.04.2012 10:39:46] Else
[3] [24.04.2012 10:39:46] Error: Fatal: Setup program gives an unknown exitcode unequal zero: 30086
[5] [24.04.2012 10:39:46] Error level set to fatal
[5] [24.04.2012 10:39:46] Process aborted
[6] [24.04.2012 10:39:46]
[6] [24.04.2012 10:39:46] ~~~~~~~ End Sub ~~~~~~~ Sub_check_exitcode
[6] [24.04.2012 10:39:46]
[5] [24.04.2012 10:39:46] Process aborted
[1] [24.04.2012 10:39:46] ___________________
[1] [24.04.2012 10:39:46] script finished
[1] [24.04.2012 10:39:46] 1 error
[1] [24.04.2012 10:39:46] 0 warnings
[1] [24.04.2012 10:39:46]
[1] [24.04.2012 10:39:46] installed Produkt: office2010engl64bit Version: 2010-1
[1] [24.04.2012 10:39:46]
[6] [24.04.2012 10:39:46] Delete "c:\opsi.org\tmp\_winstbat_*"
[6] [24.04.2012 10:39:46] Search "c:\opsi.org\tmp\"
[8] [24.04.2012 10:39:46] Temp bat files deleted, next: free script
[8] [24.04.2012 10:39:46] End of CreateAndProcessScript
[8] [24.04.2012 10:39:46] After CreateAndProcessScript
[8] [24.04.2012 10:39:46] End ProcessNonZeroScript
[8] [24.04.2012 10:39:46] First ProcessNonZeroScript finished
[8] [24.04.2012 10:39:46] Parameters in OpsiMethodCall: office2010engl64bit
[8] [24.04.2012 10:39:46] Parameters in OpsiMethodCall: w000010.ovh.local
[8] [24.04.2012 10:39:46] Parameters in OpsiMethodCall: update
[8] [24.04.2012 10:39:46] Putting to TSuperArray with: "office2010engl64bit"
[8] [24.04.2012 10:39:46] Putting to TSuperArray with: "w000010.ovh.local"
[8] [24.04.2012 10:39:46] Putting to TSuperArray with: "update"
[8] [24.04.2012 10:39:46] got omc.jsonUrlString: {"method":"setProductActionRequest","params":["office2010engl64bit","w000010.ovh.local","update"],"id":1}
[8] [24.04.2012 10:39:46] Putting to TSuperArray with: "office2010engl64bit"
[8] [24.04.2012 10:39:46] Putting to TSuperArray with: "w000010.ovh.local"
[8] [24.04.2012 10:39:46] Putting to TSuperArray with: "update"
[8] [24.04.2012 10:39:46] got omc.jsonUrlString: {"method":"setProductActionRequest","params":["office2010engl64bit","w000010.ovh.local","update"],"id":1}
[8] [24.04.2012 10:39:46] got Furl: https://172.16.16.242:4447/rpc
[6] [24.04.2012 10:39:46] JSON service request https://172.16.16.242:4447/rpc setProductActionRequest
[8] [24.04.2012 10:39:46] Putting to TSuperArray with: "office2010engl64bit"
[8] [24.04.2012 10:39:46] Putting to TSuperArray with: "w000010.ovh.local"
[8] [24.04.2012 10:39:46] Putting to TSuperArray with: "update"
[8] [24.04.2012 10:39:46] JSON service request Furlhttps://172.16.16.242:4447/rpc
[8] [24.04.2012 10:39:46] JSON service request str{"method":"setProductActionRequest","params":["office2010engl64bit","w000010.ovh.local","update"],"id":1}
[1] [24.04.2012 10:39:46] product "office2010engl64bit set to update
[8] [24.04.2012 10:39:46] get Update script name ...
[8] [24.04.2012 10:39:46] Update script name:
[1] [24.04.2012 10:39:46] Update script name:
[8] [24.04.2012 10:39:46] Start ProcessNonZeroScript
[5] [24.04.2012 10:39:46] no script file name given
[8] [24.04.2012 10:39:46] End ProcessNonZeroScript
[1] [24.04.2012 10:39:46] we have no update script
[8] [24.04.2012 10:39:46] In opsi4data.UpdateSwitches, Actionstr: setup
[8] [24.04.2012 10:39:46] Parameters in OpsiMethodCall: {"clientId":"w000010.ovh.local","actionResult":"failed","installationStatus":"unknown","actionRequest":"none","packageVersion":"1","ident":"office2010engl64bit;LocalbootProduct;w000010.ovh.local","productType":"LocalbootProduct","lastAction":"setup","productVersion":"2010","modificationTime":null,"productId":"office2010engl64bit","actionProgress":"","type":"ProductOnClient","targetConfiguration":"installed","actionSequence":null}
[8] [24.04.2012 10:39:46] Creating TSuperObject with: {"clientId":"w000010.ovh.local","actionResult":"failed","installationStatus":"unknown","actionRequest":"none","packageVersion":"1","ident":"office2010engl64bit;LocalbootProduct;w000010.ovh.local","productType":"LocalbootProduct","lastAction":"setup","productVersion":"2010","modificationTime":null,"productId":"office2010engl64bit","actionProgress":"","type":"ProductOnClient","targetConfiguration":"installed","actionSequence":null}
[8] [24.04.2012 10:39:46] got omc.jsonUrlString: {"method":"productOnClient_updateObject","params":[{"clientId":"w000010.ovh.local","actionResult":"failed","installationStatus":"unknown","actionRequest":"none","packageVersion":"1","ident":"office2010engl64bit;LocalbootProduct;w000010.ovh.local","productType":"LocalbootProduct","lastAction":"setup","productVersion":"2010","modificationTime":null,"productId":"office2010engl64bit","actionProgress":"","type":"ProductOnClient","targetConfiguration":"installed","actionSequence":null}],"id":1}
[8] [24.04.2012 10:39:46] Creating TSuperObject with: {"clientId":"w000010.ovh.local","actionResult":"failed","installationStatus":"unknown","actionRequest":"none","packageVersion":"1","ident":"office2010engl64bit;LocalbootProduct;w000010.ovh.local","productType":"LocalbootProduct","lastAction":"setup","productVersion":"2010","modificationTime":null,"productId":"office2010engl64bit","actionProgress":"","type":"ProductOnClient","targetConfiguration":"installed","actionSequence":null}
[8] [24.04.2012 10:39:46] got omc.jsonUrlString: {"method":"productOnClient_updateObject","params":[{"clientId":"w000010.ovh.local","actionResult":"failed","installationStatus":"unknown","actionRequest":"none","packageVersion":"1","ident":"office2010engl64bit;LocalbootProduct;w000010.ovh.local","productType":"LocalbootProduct","lastAction":"setup","productVersion":"2010","modificationTime":null,"productId":"office2010engl64bit","actionProgress":"","type":"ProductOnClient","targetConfiguration":"installed","actionSequence":null}],"id":1}
[8] [24.04.2012 10:39:46] got Furl: https://172.16.16.242:4447/rpc
[6] [24.04.2012 10:39:46] JSON service request https://172.16.16.242:4447/rpc productOnClient_updateObject
[8] [24.04.2012 10:39:46] Creating TSuperObject with: {"clientId":"w000010.ovh.local","actionResult":"failed","installationStatus":"unknown","actionRequest":"none","packageVersion":"1","ident":"office2010engl64bit;LocalbootProduct;w000010.ovh.local","productType":"LocalbootProduct","lastAction":"setup","productVersion":"2010","modificationTime":null,"productId":"office2010engl64bit","actionProgress":"","type":"ProductOnClient","targetConfiguration":"installed","actionSequence":null}
[8] [24.04.2012 10:39:46] JSON service request Furlhttps://172.16.16.242:4447/rpc
[8] [24.04.2012 10:39:46] JSON service request str{"method":"productOnClient_updateObject","params":[{"clientId":"w000010.ovh.local","actionResult":"failed","installationStatus":"unknown","actionRequest":"none","packageVersion":"1","ident":"office2010engl64bit;LocalbootProduct;w000010.ovh.local","productType":"LocalbootProduct","lastAction":"setup","productVersion":"2010","modificationTime":null,"productId":"office2010engl64bit","actionProgress":"","type":"ProductOnClient","targetConfiguration":"installed","actionSequence":null}],"id":1}
[7] [24.04.2012 10:39:46] Registry started with redirection (32 Bit)
[6] [24.04.2012 10:39:46] Registry key [HKLM\SOFTWARE\opsi.org\winst] opened
[6] [24.04.2012 10:39:46] Variable "RebootRequested" is keeping its value "0"
[6] [24.04.2012 10:39:46] Variable "LastLogFilename" is keeping its value "c:\tmp\instlog.txt"
[6] [24.04.2012 10:39:46] Variable "ContinueLogFile" is keeping its value "0"
[6] [24.04.2012 10:39:46] Variable "NumberOfErrors" is keeping its value "0"
[6] [24.04.2012 10:39:46] Key flushed
[6] [24.04.2012 10:39:46] Key closed
Im voraus vielen Dank.
Carsten
-
- Beiträge: 74
- Registriert: 01 Aug 2011, 10:45
Re: Office 2010 - Frage von absolutem Newbie
Hi,
MS Office 2010 64 bit !!!!!
Hier paar Links zum Lesen, nur als Tipp:
http://blogs.technet.com/b/dmelanchthon ... 4-bit.aspx
http://blogs.technet.com/b/germany/arch ... rsion.aspx
Hast du keine Volumenlizenz, bleibt dir nichts anderes übrig als die Responsedatei manuell zu erstellen:
http://technet.microsoft.com/de-de/libr ... 79195.aspx
Ich vermute stark, die config.xml, die du benutzt für Silent Setup ist fehlerhaft.
Gruß
Konstantin
MS Office 2010 64 bit !!!!!
Hier paar Links zum Lesen, nur als Tipp:
http://blogs.technet.com/b/dmelanchthon ... 4-bit.aspx
http://blogs.technet.com/b/germany/arch ... rsion.aspx
Hast du keine Volumenlizenz, bleibt dir nichts anderes übrig als die Responsedatei manuell zu erstellen:
http://technet.microsoft.com/de-de/libr ... 79195.aspx
Ich vermute stark, die config.xml, die du benutzt für Silent Setup ist fehlerhaft.
Gruß
Konstantin