Problem bei Inst. von Localboot-Prod. - 'getListOfProducts'

Antworten
it-service
Beiträge: 16
Registriert: 11 Mär 2010, 15:23
Wohnort: Bad Lausick
Kontaktdaten:
Kontaktdaten von it-service

Problem bei Inst. von Localboot-Prod. - 'getListOfProducts'

Beitrag von it-service »

Hallo,
ich habe bei der Installation von Localboot-Produkten (hwaudit / swaudit) das Problem, dass der Winst an der Stelle 'getListOfProducts' stehen bleibt. Auffällig ist, dass dieses Problem nur bei Notebooks auftritt. Ich dachte zunächst, dass es an den Notebooks liegt, habe aber zwei erfolgreich einreichten können. Die Installation des opsi-client-agents ist erfolgreich. Ich habe mal die opsiclientd.log von einem erfolgreich installierten Notebook mit dem Log verglichen wo das Problem auftritt. Dabei ist mir folgendes aufgefallen:

---- Ausschnitt aus Log vom Client auf dem hwaudit / swaudit erfolgreich installiert wurden -----

Code: Alles auswählen

[5] [Nov 03 09:55:08] [opsiclientd]   Updating config file: 'C:\Program Files\opsi.org\opsi-client-agent\opsiclientd\opsiclientd.conf'     (Opsiclientd.pyo|333)
[7] [Nov 03 09:55:08] [opsiclientd]   Parsing ini file 'C:\Program Files\opsi.org\opsi-client-agent\opsiclientd\opsiclientd.conf'     (__init__.pyo|450)
[7] [Nov 03 09:55:08] [opsiclientd]   Trying to lock file 'C:\Program Files\opsi.org\opsi-client-agent\opsiclientd\opsiclientd.conf' (0/2000)     (__init__.pyo|164)
[7] [Nov 03 09:55:08] [opsiclientd]   File 'C:\Program Files\opsi.org\opsi-client-agent\opsiclientd\opsiclientd.conf' locked after 0 millis     (__init__.pyo|186)
[7] [Nov 03 09:55:08] [opsiclientd]   Finished reading file after 0.015 seconds     (__init__.pyo|475)
[5] [Nov 03 09:55:08] [opsiclientd]   No need to write config file 'C:\Program Files\opsi.org\opsi-client-agent\opsiclientd\opsiclientd.conf', config file is up to date     (Opsiclientd.pyo|365)
[7] [Nov 03 09:55:08] [event processing gui_startup]   messageChanged: subject id 'status', message 'Frage auszuführende Aktionen beim Config-Service nach'     (Message.pyo|494)
[6] [Nov 03 09:55:08] [event processing gui_startup]   sending notification 'messageChanged' to clients     (Message.pyo|549)
[7] [Nov 03 09:55:08] [event processing gui_startup]   Executing jsonrpc method 'productOnClient_getObjects' on host https://192.168.2.249:4447/rpc     (JSONRPC.pyo|369)
[8] [Nov 03 09:55:08] [event processing gui_startup]   jsonrpc string: {"params": [["actionRequest"], {"actionRequest": ["setup", "uninstall", "update", "always", "once", "custom"], "productType": "LocalbootProduct", "clientId": "stratos-nb-ije.stratos.local"}], "id": 1, "method": "productOnClient_getObjects"}     (JSONRPC.pyo|377)
[8] [Nov 03 09:55:08] [event processing gui_startup]   requesting: 'https://192.168.2.249:4447/rpc', query '{"params": [["actionRequest"], {"actionRequest": ["setup", "uninstall", "update", "always", "once", "custom"], "productType": "LocalbootProduct", "clientId": "stratos-nb-ije.stratos.local"}], "id": 1, "method": "productOnClient_getObjects"}'     (JSONRPC.pyo|379)
[7] [Nov 03 09:55:08] [event processing gui_startup]   Using method POST     (JSONRPC.pyo|430)
[8] [Nov 03 09:55:08] [event processing gui_startup]   Compressing query     (JSONRPC.pyo|433)
[8] [Nov 03 09:55:08] [event processing gui_startup]   Sending query     (JSONRPC.pyo|458)
[8] [Nov 03 09:55:08] [event processing gui_startup]   Getting response     (JSONRPC.pyo|462)
[7] [Nov 03 09:55:08] [event processing gui_startup]   Content-Type: gzip-application/json;charset=utf-8     (JSONRPC.pyo|485)
[7] [Nov 03 09:55:08] [event processing gui_startup]   Expecting compressed data from server     (JSONRPC.pyo|487)
[8] [Nov 03 09:55:08] [event processing gui_startup]   {"id": 1, "result": [], "error": null}     (JSONRPC.pyo|489)
[5] [Nov 03 09:55:08] [event processing gui_startup]   No product action requests set     (Opsiclientd.pyo|1757)
[7] [Nov 03 09:55:08] [event processing gui_startup]   messageChanged: subject id 'status', message 'Keine Produkt-Aktionen gesetzt'     (Message.pyo|494)
[6] [Nov 03 09:55:08] [event processing gui_startup]   sending notification 'messageChanged' to clients     (Message.pyo|549)
[7] [Nov 03 09:55:11] [event processing gui_startup]   messageChanged: subject id 'message', message ''     (Message.pyo|494)
[6] [Nov 03 09:55:11] [event processing gui_startup]   sending notification 'messageChanged' to clients     (Message.pyo|549)
[5] [Nov 03 09:55:11] [event processing gui_startup]   Writing log to service     (Opsiclientd.pyo|1441)
[7] [Nov 03 09:55:11] [event processing gui_startup]   messageChanged: subject id 'status', message 'Ãœbertrage Protokoll-Datei zum Service'     (Message.pyo|494)
[6] [Nov 03 09:55:11] [event processing gui_startup]   sending notification 'messageChanged' to clients     (Message.pyo|549)
[7] [Nov 03 09:55:12] [event processing gui_startup]   Executing jsonrpc method 'backend_exit' on host https://192.168.2.249:4447/rpc     (JSONRPC.pyo|369)
[8] [Nov 03 09:55:12] [event processing gui_startup]   jsonrpc string: {"params": [], "id": 1, "method": "backend_exit"}     (JSONRPC.pyo|377)
[8] [Nov 03 09:55:12] [event processing gui_startup]   requesting: 'https://192.168.2.249:4447/rpc', query '{"params": [], "id": 1, "method": "backend_exit"}'     (JSONRPC.pyo|379)
[7] [Nov 03 09:55:12] [event processing gui_startup]   Using method POST     (JSONRPC.pyo|430)
[8] [Nov 03 09:55:12] [event processing gui_startup]   Compressing query     (JSONRPC.pyo|433)
[8] [Nov 03 09:55:12] [event processing gui_startup]   Sending query     (JSONRPC.pyo|458)
[8] [Nov 03 09:55:12] [event processing gui_startup]   Getting response     (JSONRPC.pyo|462)
[7] [Nov 03 09:55:12] [event processing gui_startup]   Content-Type: gzip-application/json;charset=utf-8     (JSONRPC.pyo|485)
[7] [Nov 03 09:55:12] [event processing gui_startup]   Expecting compressed data from server     (JSONRPC.pyo|487)
[8] [Nov 03 09:55:12] [event processing gui_startup]   {"id": 1, "result": null, "error": null}     (JSONRPC.pyo|489)
[6] [Nov 03 09:55:12] [opsiclientd]   rebootRequested: 0     (Windows.pyo|333)
[6] [Nov 03 09:55:12] [opsiclientd]   shutdownRequested: 0     (Windows.pyo|347)
[7] [Nov 03 09:55:12] [event processing gui_startup]   messageChanged: subject id 'status', message 'Gebe Anmeldung frei'     (Message.pyo|494)
[6] [Nov 03 09:55:12] [event processing gui_startup]   sending notification 'messageChanged' to clients     (Message.pyo|549)
[5] [Nov 03 09:55:12] [opsiclientd]   Block login now set to 'False'     (Opsiclientd.pyo|166)
[6] [Nov 03 09:55:12] [opsiclientd]   Terminating block login notifier app (pid 2036)     (Opsiclientd.pyo|193)
[7] [Nov 03 09:55:12] [event processing gui_startup]   messageChanged: subject id 'status', message ''     (Message.pyo|494)
[6] [Nov 03 09:55:12] [event processing gui_startup]   sending notification 'messageChanged' to clients     (Message.pyo|549)
[6] [Nov 03 09:55:12] [event processing gui_startup]   Stopping notification server     (Opsiclientd.pyo|2179)
[6] [Nov 03 09:55:12] [event processing gui_startup]   sending notification 'endConnection' to clients     (Message.pyo|549)
[6] [Nov 03 09:55:14] [control server]   client connection lost     (Message.pyo|454)
[5] [Nov 03 09:55:14] [event processing gui_startup]   ============= EventProcessingThread for event '<ocdlib.Events.GUIStartupEvent object at 0x01D66D30>' ended =============     (Opsiclientd.pyo|2189)
---------------------------------------Ende Ausschnitt---------------------------------------------------------------


---- Ausschnitt aus Log vom Client auf dem das Problem auftritt --------------------

Code: Alles auswählen

[5] [Nov 03 08:00:20] [opsiclientd]   Updating config file: 'C:\Program Files\opsi.org\opsi-client-agent\opsiclientd\opsiclientd.conf'     (Opsiclientd.pyo|333)
[7] [Nov 03 08:00:20] [opsiclientd]   Parsing ini file 'C:\Program Files\opsi.org\opsi-client-agent\opsiclientd\opsiclientd.conf'     (__init__.pyo|450)
[7] [Nov 03 08:00:20] [opsiclientd]   Trying to lock file 'C:\Program Files\opsi.org\opsi-client-agent\opsiclientd\opsiclientd.conf' (0/2000)     (__init__.pyo|164)
[7] [Nov 03 08:00:20] [opsiclientd]   File 'C:\Program Files\opsi.org\opsi-client-agent\opsiclientd\opsiclientd.conf' locked after 0 millis     (__init__.pyo|186)
[7] [Nov 03 08:00:20] [opsiclientd]   Finished reading file after 0.000 seconds     (__init__.pyo|475)
[5] [Nov 03 08:00:20] [opsiclientd]   No need to write config file 'C:\Program Files\opsi.org\opsi-client-agent\opsiclientd\opsiclientd.conf', config file is up to date     (Opsiclientd.pyo|365)
[7] [Nov 03 08:00:20] [event processing gui_startup]   messageChanged: subject id 'status', message 'Frage auszuführende Aktionen beim Config-Service nach'     (Message.pyo|494)
[6] [Nov 03 08:00:20] [event processing gui_startup]   sending notification 'messageChanged' to clients     (Message.pyo|549)
[7] [Nov 03 08:00:20] [event processing gui_startup]   Executing jsonrpc method 'productOnClient_getObjects' on host https://192.168.2.249:4447/rpc     (JSONRPC.pyo|369)
[8] [Nov 03 08:00:20] [event processing gui_startup]   jsonrpc string: {"params": [["actionRequest"], {"actionRequest": ["setup", "uninstall", "update", "always", "once", "custom"], "productType": "LocalbootProduct", "clientId": "stratos-nb-men.stratos.local"}], "id": 1, "method": "productOnClient_getObjects"}     (JSONRPC.pyo|377)
[8] [Nov 03 08:00:20] [event processing gui_startup]   requesting: 'https://192.168.2.249:4447/rpc', query '{"params": [["actionRequest"], {"actionRequest": ["setup", "uninstall", "update", "always", "once", "custom"], "productType": "LocalbootProduct", "clientId": "stratos-nb-men.stratos.local"}], "id": 1, "method": "productOnClient_getObjects"}'     (JSONRPC.pyo|379)
[7] [Nov 03 08:00:20] [event processing gui_startup]   Using method POST     (JSONRPC.pyo|430)
[8] [Nov 03 08:00:20] [event processing gui_startup]   Compressing query     (JSONRPC.pyo|433)
[8] [Nov 03 08:00:20] [event processing gui_startup]   Sending query     (JSONRPC.pyo|458)
[8] [Nov 03 08:00:20] [event processing gui_startup]   Getting response     (JSONRPC.pyo|462)
[7] [Nov 03 08:00:20] [event processing gui_startup]   Content-Type: gzip-application/json;charset=utf-8     (JSONRPC.pyo|485)
[7] [Nov 03 08:00:20] [event processing gui_startup]   Expecting compressed data from server     (JSONRPC.pyo|487)
[8] [Nov 03 08:00:20] [event processing gui_startup]   {"id": 1, "result": [], "error": null}     (JSONRPC.pyo|489)
[5] [Nov 03 08:00:20] [event processing gui_startup]   No product action requests set     (Opsiclientd.pyo|1757)
[7] [Nov 03 08:00:20] [event processing gui_startup]   messageChanged: subject id 'status', message 'Keine Produkt-Aktionen gesetzt'     (Message.pyo|494)
[6] [Nov 03 08:00:20] [event processing gui_startup]   sending notification 'messageChanged' to clients     (Message.pyo|549)
[7] [Nov 03 08:00:22] [control pipe]   Connected to named pipe \\.\pipe\opsiclientd     (ControlPipe.pyo|297)
[7] [Nov 03 08:00:22] [control pipe]   Creating NTControlPipeConnection     (ControlPipe.pyo|298)
[7] [Nov 03 08:00:22] [control pipe]   NTControlPipeConnection initiated     (ControlPipe.pyo|192)
[7] [Nov 03 08:00:22] [control pipe]   NTControlPipeConnection thread started     (ControlPipe.pyo|301)
[6] [Nov 03 08:00:22] [control pipe]   Creating pipe \\.\pipe\opsiclientd     (ControlPipe.pyo|251)
[7] [Nov 03 08:00:22] [control pipe]   Pipe \\.\pipe\opsiclientd created     (ControlPipe.pyo|270)
[7] [Nov 03 08:00:22] [control pipe]   Connecting to named pipe \\.\pipe\opsiclientd     (ControlPipe.pyo|291)
[8] [Nov 03 08:00:22] [control pipe]   Reading fom pipe     (ControlPipe.pyo|207)
[7] [Nov 03 08:00:22] [control pipe]   Received rpc from pipe '{"id": 1, "method": "getBlockLogin", "params": []}'     (ControlPipe.pyo|210)
[5] [Nov 03 08:00:22] [json rpc]   -----> Executing: getBlockLogin()     (JsonRpc.pyo|95)
[8] [Nov 03 08:00:22] [opsiclientd]   Interface method name 'backend_exit' params []     (ControlPipe.pyo|399)
[8] [Nov 03 08:00:22] [opsiclientd]   Interface method name 'backend_getInterface' params []     (ControlPipe.pyo|399)
[8] [Nov 03 08:00:22] [opsiclientd]   Interface method name 'backend_info' params []     (ControlPipe.pyo|399)
[8] [Nov 03 08:00:22] [opsiclientd]   Interface method name 'exit' params []     (ControlPipe.pyo|399)
[8] [Nov 03 08:00:22] [opsiclientd]   Interface method name 'getBlockLogin' params []     (ControlPipe.pyo|399)
[8] [Nov 03 08:00:22] [opsiclientd]   Interface method name 'getInterface' params []     (ControlPipe.pyo|399)
[8] [Nov 03 08:00:22] [opsiclientd]   Interface method name 'getPossibleMethods_listOfHashes' params []     (ControlPipe.pyo|399)
[8] [Nov 03 08:00:22] [opsiclientd]   Interface method name 'isRebootRequested' params []     (ControlPipe.pyo|399)
[8] [Nov 03 08:00:22] [opsiclientd]   Interface method name 'isRebootTriggered' params []     (ControlPipe.pyo|399)
[8] [Nov 03 08:00:22] [opsiclientd]   Interface method name 'isShutdownRequested' params []     (ControlPipe.pyo|399)
[8] [Nov 03 08:00:22] [opsiclientd]   Interface method name 'isShutdownTriggered' params []     (ControlPipe.pyo|399)
[5] [Nov 03 08:00:22] [opsiclientd]   rpc getBlockLogin: blockLogin is 'True'     (ControlPipe.pyo|425)
[6] [Nov 03 08:00:22] [json rpc]   Got result     (JsonRpc.pyo|123)
[8] [Nov 03 08:00:22] [json rpc]   Result is: True     (JsonRpc.pyo|124)
[8] [Nov 03 08:00:22] [control pipe]   Writing to pipe     (ControlPipe.pyo|213)
[8] [Nov 03 08:00:22] [control pipe]   Number of bytes written: 41     (ControlPipe.pyo|220)
[7] [Nov 03 08:00:22] [control pipe]   NTControlPipeConnection exiting     (ControlPipe.pyo|237)
[7] [Nov 03 08:00:23] [event processing gui_startup]   messageChanged: subject id 'message', message ''     (Message.pyo|494)
[6] [Nov 03 08:00:23] [event processing gui_startup]   sending notification 'messageChanged' to clients     (Message.pyo|549)
[5] [Nov 03 08:00:23] [event processing gui_startup]   Writing log to service     (Opsiclientd.pyo|1441)
[7] [Nov 03 08:00:23] [event processing gui_startup]   messageChanged: subject id 'status', message 'Ãœbertrage Protokoll-Datei zum Service'     (Message.pyo|494)
[6] [Nov 03 08:00:23] [event processing gui_startup]   sending notification 'messageChanged' to clients     (Message.pyo|549)
[7] [Nov 03 08:00:23] [event processing gui_startup]   Executing jsonrpc method 'backend_exit' on host https://192.168.2.249:4447/rpc     (JSONRPC.pyo|369)
[8] [Nov 03 08:00:23] [event processing gui_startup]   jsonrpc string: {"params": [], "id": 1, "method": "backend_exit"}     (JSONRPC.pyo|377)
[8] [Nov 03 08:00:23] [event processing gui_startup]   requesting: 'https://192.168.2.249:4447/rpc', query '{"params": [], "id": 1, "method": "backend_exit"}'     (JSONRPC.pyo|379)
[7] [Nov 03 08:00:23] [event processing gui_startup]   Using method POST     (JSONRPC.pyo|430)
[8] [Nov 03 08:00:23] [event processing gui_startup]   Compressing query     (JSONRPC.pyo|433)
[8] [Nov 03 08:00:23] [event processing gui_startup]   Sending query     (JSONRPC.pyo|458)
[8] [Nov 03 08:00:23] [event processing gui_startup]   Getting response     (JSONRPC.pyo|462)
[7] [Nov 03 08:00:23] [event processing gui_startup]   Content-Type: gzip-application/json;charset=utf-8     (JSONRPC.pyo|485)
[7] [Nov 03 08:00:23] [event processing gui_startup]   Expecting compressed data from server     (JSONRPC.pyo|487)
[8] [Nov 03 08:00:23] [event processing gui_startup]   {"id": 1, "result": null, "error": null}     (JSONRPC.pyo|489)
[6] [Nov 03 08:00:23] [opsiclientd]   rebootRequested: 0     (Windows.pyo|333)
[6] [Nov 03 08:00:23] [opsiclientd]   shutdownRequested: 0     (Windows.pyo|347)
[7] [Nov 03 08:00:23] [event processing gui_startup]   messageChanged: subject id 'status', message 'Gebe Anmeldung frei'     (Message.pyo|494)
[6] [Nov 03 08:00:23] [event processing gui_startup]   sending notification 'messageChanged' to clients     (Message.pyo|549)
[5] [Nov 03 08:00:23] [opsiclientd]   Block login now set to 'False'     (Opsiclientd.pyo|166)
[6] [Nov 03 08:00:23] [opsiclientd]   Terminating block login notifier app (pid 548)     (Opsiclientd.pyo|193)
[7] [Nov 03 08:00:23] [event processing gui_startup]   messageChanged: subject id 'status', message ''     (Message.pyo|494)
[6] [Nov 03 08:00:23] [event processing gui_startup]   sending notification 'messageChanged' to clients     (Message.pyo|549)
[6] [Nov 03 08:00:23] [event processing gui_startup]   Stopping notification server     (Opsiclientd.pyo|2179)
[6] [Nov 03 08:00:23] [event processing gui_startup]   sending notification 'endConnection' to clients     (Message.pyo|549)
[6] [Nov 03 08:00:25] [event config wait_for_gui]   client connection lost  (Message.pyo|454)
[7] [Nov 03 08:00:25] [control pipe]   Connected to named pipe \\.\pipe\opsiclientd     (ControlPipe.pyo|297)
[7] [Nov 03 08:00:25] [control pipe]   Creating NTControlPipeConnection     (ControlPipe.pyo|298)
[7] [Nov 03 08:00:25] [control pipe]   NTControlPipeConnection initiated     (ControlPipe.pyo|192)
[8] [Nov 03 08:00:25] [control pipe]   Reading fom pipe     (ControlPipe.pyo|207)
[7] [Nov 03 08:00:25] [control pipe]   NTControlPipeConnection thread started     (ControlPipe.pyo|301)
[7] [Nov 03 08:00:25] [control pipe]   Received rpc from pipe '{"id": 1, "method": "getBlockLogin", "params": []}'     (ControlPipe.pyo|210)
[6] [Nov 03 08:00:25] [control pipe]   Creating pipe \\.\pipe\opsiclientd     (ControlPipe.pyo|251)
[7] [Nov 03 08:00:25] [control pipe]   Pipe \\.\pipe\opsiclientd created     (ControlPipe.pyo|270)
[5] [Nov 03 08:00:25] [json rpc]   -----> Executing: getBlockLogin()     (JsonRpc.pyo|95)
[7] [Nov 03 08:00:25] [control pipe]   Connecting to named pipe \\.\pipe\opsiclientd     (ControlPipe.pyo|291)
[8] [Nov 03 08:00:25] [opsiclientd]   Interface method name 'backend_exit' params []     (ControlPipe.pyo|399)
[8] [Nov 03 08:00:25] [opsiclientd]   Interface method name 'backend_getInterface' params []     (ControlPipe.pyo|399)
[8] [Nov 03 08:00:25] [opsiclientd]   Interface method name 'backend_info' params []     (ControlPipe.pyo|399)
[8] [Nov 03 08:00:25] [opsiclientd]   Interface method name 'exit' params []     (ControlPipe.pyo|399)
[8] [Nov 03 08:00:25] [opsiclientd]   Interface method name 'getBlockLogin' params []     (ControlPipe.pyo|399)
[8] [Nov 03 08:00:25] [opsiclientd]   Interface method name 'getInterface' params []     (ControlPipe.pyo|399)
[8] [Nov 03 08:00:25] [opsiclientd]   Interface method name 'getPossibleMethods_listOfHashes' params []     (ControlPipe.pyo|399)
[8] [Nov 03 08:00:25] [opsiclientd]   Interface method name 'isRebootRequested' params []     (ControlPipe.pyo|399)
[8] [Nov 03 08:00:25] [opsiclientd]   Interface method name 'isRebootTriggered' params []     (ControlPipe.pyo|399)
[8] [Nov 03 08:00:25] [opsiclientd]   Interface method name 'isShutdownRequested' params []     (ControlPipe.pyo|399)
[8] [Nov 03 08:00:25] [opsiclientd]   Interface method name 'isShutdownTriggered' params []     (ControlPipe.pyo|399)
[5] [Nov 03 08:00:25] [opsiclientd]   rpc getBlockLogin: blockLogin is 'False'     (ControlPipe.pyo|425)
[6] [Nov 03 08:00:25] [json rpc]   Got result     (JsonRpc.pyo|123)
[8] [Nov 03 08:00:25] [json rpc]   Result is: False     (JsonRpc.pyo|124)
[8] [Nov 03 08:00:25] [control pipe]   Writing to pipe     (ControlPipe.pyo|213)
[8] [Nov 03 08:00:25] [control pipe]   Number of bytes written: 42     (ControlPipe.pyo|220)
[7] [Nov 03 08:00:25] [control pipe]   NTControlPipeConnection exiting     (ControlPipe.pyo|237)
[5] [Nov 03 08:00:26] [event processing gui_startup]   ============= EventProcessingThread for event '<ocdlib.Events.GUIStartupEvent object at 0x0247BD70>' ended =============     (Opsiclientd.pyo|2189)
-----------Ende Ausschnitt-----------------------------------------------


was hat es mit dieser [control pipe] auf sich??
Anzumerken ist, die beiden Ausschnitte stammen aus Logs bei denen kein Produktschalter gesetzt ist. Nun noch der Ausschnitt aus der Log, wenn sich der Client an der Stelle 'getListOfProducts' aufhängt. Dann sieht es im Log so aus, als ob der Client in einer Art Schleife hängt....

------------------Anfang Ausschnitt---------------------------

Code: Alles auswählen

[7] [Oct 28 10:52:20] [event processing gui_startup]   getSessionId()     (Opsiclientd.pyo|1085)
[5] [Oct 28 10:52:20] [opsiclientd]   rpc setStatusMessage: Setting status message to 'Starte action processor'     (ControlServer.pyo|731)
[7] [Oct 28 10:52:20] [event generator wait_for_gui]   messageChanged: subject id 'status', message 'Starte action processor'  (Message.pyo|494)
[6] [Oct 28 10:52:20] [event generator wait_for_gui]   sending notification 'messageChanged' to clients  (Message.pyo|549)
[6] [Oct 28 10:52:20] [json rpc]   Got result     (JsonRpc.pyo|123)
[8] [Oct 28 10:52:20] [json rpc]   Result is: None     (JsonRpc.pyo|124)
[7] [Oct 28 10:52:20] [action_processor_starter.exe]   Content-Type: application/json;charset=utf-8  (JSONRPC.pyo|485)
[8] [Oct 28 10:52:20] [action_processor_starter.exe]   {"error": null, "result": null, "id": 1}  (JSONRPC.pyo|493)
[5] [Oct 28 10:52:20] [action_processor_starter.exe]   Running command '"C:\Program Files\opsi.org\opsi-client-agent\\opsi-winst\\winst32.exe" /opsiservice "https://stratos-s-opsi-1:4447/rpc" /clientid stratos-nb-men.stratos.local /username stratos-nb-men.stratos.local /password 4b8a9b9a80524c57c4b9f71929662988' as user 'pcpatch' on desktop 'winlogon'  (Windows.pyo|1132)
[6] [Oct 28 10:52:20] [action_processor_starter.exe]   Process startet, pid: 3536  (Windows.pyo|1136)
[6] [Oct 28 10:52:20] [action_processor_starter.exe]   Waiting for process ending: 3536 (timeout: 10800 seconds)  (Windows.pyo|1139)
[7] [Oct 28 10:52:21] [control pipe]   Connected to named pipe \\.\pipe\opsiclientd     (ControlPipe.pyo|297)
[7] [Oct 28 10:52:21] [control pipe]   Creating NTControlPipeConnection     (ControlPipe.pyo|298)
[7] [Oct 28 10:52:21] [control pipe]   NTControlPipeConnection initiated     (ControlPipe.pyo|192)
[8] [Oct 28 10:52:21] [control pipe]   Reading fom pipe     (ControlPipe.pyo|207)
[7] [Oct 28 10:52:21] [control pipe]   NTControlPipeConnection thread started     (ControlPipe.pyo|301)
[7] [Oct 28 10:52:21] [control pipe]   Received rpc from pipe '{"id": 1, "method": "getBlockLogin", "params": []}'     (ControlPipe.pyo|210)
[6] [Oct 28 10:52:21] [control pipe]   Creating pipe \\.\pipe\opsiclientd     (ControlPipe.pyo|251)
[5] [Oct 28 10:52:21] [json rpc]   -----> Executing: getBlockLogin()     (JsonRpc.pyo|95)
[7] [Oct 28 10:52:21] [control pipe]   Pipe \\.\pipe\opsiclientd created     (ControlPipe.pyo|270)
[7] [Oct 28 10:52:21] [control pipe]   Connecting to named pipe \\.\pipe\opsiclientd     (ControlPipe.pyo|291)
[8] [Oct 28 10:52:21] [opsiclientd]   Interface method name 'backend_exit' params []     (ControlPipe.pyo|399)
[8] [Oct 28 10:52:21] [opsiclientd]   Interface method name 'backend_getInterface' params []     (ControlPipe.pyo|399)
[8] [Oct 28 10:52:21] [opsiclientd]   Interface method name 'backend_info' params []     (ControlPipe.pyo|399)
[8] [Oct 28 10:52:21] [opsiclientd]   Interface method name 'exit' params []     (ControlPipe.pyo|399)
[8] [Oct 28 10:52:21] [opsiclientd]   Interface method name 'getBlockLogin' params []     (ControlPipe.pyo|399)
[8] [Oct 28 10:52:21] [opsiclientd]   Interface method name 'getInterface' params []     (ControlPipe.pyo|399)
[8] [Oct 28 10:52:21] [opsiclientd]   Interface method name 'getPossibleMethods_listOfHashes' params []     (ControlPipe.pyo|399)
[8] [Oct 28 10:52:21] [opsiclientd]   Interface method name 'isRebootRequested' params []     (ControlPipe.pyo|399)
[8] [Oct 28 10:52:21] [opsiclientd]   Interface method name 'isRebootTriggered' params []     (ControlPipe.pyo|399)
[8] [Oct 28 10:52:21] [opsiclientd]   Interface method name 'isShutdownRequested' params []     (ControlPipe.pyo|399)
[8] [Oct 28 10:52:21] [opsiclientd]   Interface method name 'isShutdownTriggered' params []     (ControlPipe.pyo|399)
[5] [Oct 28 10:52:21] [opsiclientd]   rpc getBlockLogin: blockLogin is 'True'     (ControlPipe.pyo|425)
[6] [Oct 28 10:52:21] [json rpc]   Got result     (JsonRpc.pyo|123)
[8] [Oct 28 10:52:21] [json rpc]   Result is: True     (JsonRpc.pyo|124)
[8] [Oct 28 10:52:21] [control pipe]   Writing to pipe     (ControlPipe.pyo|213)
[8] [Oct 28 10:52:21] [control pipe]   Number of bytes written: 41     (ControlPipe.pyo|220)
[7] [Oct 28 10:52:21] [control pipe]   NTControlPipeConnection exiting     (ControlPipe.pyo|237)
[7] [Oct 28 10:52:24] [control pipe]   Connected to named pipe \\.\pipe\opsiclientd     (ControlPipe.pyo|297)
[7] [Oct 28 10:52:24] [control pipe]   Creating NTControlPipeConnection     (ControlPipe.pyo|298)
[7] [Oct 28 10:52:24] [control pipe]   NTControlPipeConnection initiated     (ControlPipe.pyo|192)
[8] [Oct 28 10:52:24] [control pipe]   Reading fom pipe     (ControlPipe.pyo|207)
[7] [Oct 28 10:52:24] [control pipe]   NTControlPipeConnection thread started     (ControlPipe.pyo|301)
[7] [Oct 28 10:52:24] [control pipe]   Received rpc from pipe '{"id": 1, "method": "getBlockLogin", "params": []}'     (ControlPipe.pyo|210)
[6] [Oct 28 10:52:24] [control pipe]   Creating pipe \\.\pipe\opsiclientd     (ControlPipe.pyo|251)
[7] [Oct 28 10:52:24] [control pipe]   Pipe \\.\pipe\opsiclientd created     (ControlPipe.pyo|270)
[5] [Oct 28 10:52:24] [json rpc]   -----> Executing: getBlockLogin()     (JsonRpc.pyo|95)
[7] [Oct 28 10:52:24] [control pipe]   Connecting to named pipe \\.\pipe\opsiclientd     (ControlPipe.pyo|291)
[8] [Oct 28 10:52:24] [opsiclientd]   Interface method name 'backend_exit' params []     (ControlPipe.pyo|399)
[8] [Oct 28 10:52:24] [opsiclientd]   Interface method name 'backend_getInterface' params []     (ControlPipe.pyo|399)
[8] [Oct 28 10:52:24] [opsiclientd]   Interface method name 'backend_info' params []     (ControlPipe.pyo|399)
[8] [Oct 28 10:52:24] [opsiclientd]   Interface method name 'exit' params []     (ControlPipe.pyo|399)
[8] [Oct 28 10:52:24] [opsiclientd]   Interface method name 'getBlockLogin' params []     (ControlPipe.pyo|399)
[8] [Oct 28 10:52:24] [opsiclientd]   Interface method name 'getInterface' params []     (ControlPipe.pyo|399)
[8] [Oct 28 10:52:24] [opsiclientd]   Interface method name 'getPossibleMethods_listOfHashes' params []     (ControlPipe.pyo|399)
[8] [Oct 28 10:52:24] [opsiclientd]   Interface method name 'isRebootRequested' params []     (ControlPipe.pyo|399)
[8] [Oct 28 10:52:24] [opsiclientd]   Interface method name 'isRebootTriggered' params []     (ControlPipe.pyo|399)
[8] [Oct 28 10:52:24] [opsiclientd]   Interface method name 'isShutdownRequested' params []     (ControlPipe.pyo|399)
[8] [Oct 28 10:52:24] [opsiclientd]   Interface method name 'isShutdownTriggered' params []     (ControlPipe.pyo|399)
[5] [Oct 28 10:52:24] [opsiclientd]   rpc getBlockLogin: blockLogin is 'True'     (ControlPipe.pyo|425)
[6] [Oct 28 10:52:24] [json rpc]   Got result     (JsonRpc.pyo|123)
[8] [Oct 28 10:52:24] [json rpc]   Result is: True     (JsonRpc.pyo|124)
[8] [Oct 28 10:52:24] [control pipe]   Writing to pipe     (ControlPipe.pyo|213)
[8] [Oct 28 10:52:24] [control pipe]   Number of bytes written: 41     (ControlPipe.pyo|220)
[7] [Oct 28 10:52:24] [control pipe]   NTControlPipeConnection exiting     (ControlPipe.pyo|237)
[7] [Oct 28 10:52:27] [control pipe]   Connected to named pipe \\.\pipe\opsiclientd     (ControlPipe.pyo|297)
[7] [Oct 28 10:52:27] [control pipe]   Creating NTControlPipeConnection     (ControlPipe.pyo|298)
[7] [Oct 28 10:52:27] [control pipe]   NTControlPipeConnection initiated     (ControlPipe.pyo|192)
[7] [Oct 28 10:52:27] [control pipe]   NTControlPipeConnection thread started     (ControlPipe.pyo|301)
[6] [Oct 28 10:52:27] [control pipe]   Creating pipe \\.\pipe\opsiclientd     (ControlPipe.pyo|251)
[7] [Oct 28 10:52:27] [control pipe]   Pipe \\.\pipe\opsiclientd created     (ControlPipe.pyo|270)
[7] [Oct 28 10:52:27] [control pipe]   Connecting to named pipe \\.\pipe\opsiclientd     (ControlPipe.pyo|291)
[8] [Oct 28 10:52:27] [control pipe]   Reading fom pipe     (ControlPipe.pyo|207)
[7] [Oct 28 10:52:27] [control pipe]   Received rpc from pipe '{"id": 1, "method": "getBlockLogin", "params": []}'     (ControlPipe.pyo|210)
[5] [Oct 28 10:52:27] [json rpc]   -----> Executing: getBlockLogin()     (JsonRpc.pyo|95)
[8] [Oct 28 10:52:27] [opsiclientd]   Interface method name 'backend_exit' params []     (ControlPipe.pyo|399)
[8] [Oct 28 10:52:27] [opsiclientd]   Interface method name 'backend_getInterface' params []     (ControlPipe.pyo|399)
[8] [Oct 28 10:52:27] [opsiclientd]   Interface method name 'backend_info' params []     (ControlPipe.pyo|399)
[8] [Oct 28 10:52:27] [opsiclientd]   Interface method name 'exit' params []     (ControlPipe.pyo|399)
[8] [Oct 28 10:52:27] [opsiclientd]   Interface method name 'getBlockLogin' params []     (ControlPipe.pyo|399)
[8] [Oct 28 10:52:27] [opsiclientd]   Interface method name 'getInterface' params []     (ControlPipe.pyo|399)
[8] [Oct 28 10:52:27] [opsiclientd]   Interface method name 'getPossibleMethods_listOfHashes' params []     (ControlPipe.pyo|399)
[8] [Oct 28 10:52:27] [opsiclientd]   Interface method name 'isRebootRequested' params []     (ControlPipe.pyo|399)
[8] [Oct 28 10:52:27] [opsiclientd]   Interface method name 'isRebootTriggered' params []     (ControlPipe.pyo|399)
[8] [Oct 28 10:52:27] [opsiclientd]   Interface method name 'isShutdownRequested' params []     (ControlPipe.pyo|399)
[8] [Oct 28 10:52:27] [opsiclientd]   Interface method name 'isShutdownTriggered' params []     (ControlPipe.pyo|399)
[5] [Oct 28 10:52:27] [opsiclientd]   rpc getBlockLogin: blockLogin is 'True'     (ControlPipe.pyo|425)
[6] [Oct 28 10:52:27] [json rpc]   Got result     (JsonRpc.pyo|123)
[8] [Oct 28 10:52:27] [json rpc]   Result is: True     (JsonRpc.pyo|124)
[8] [Oct 28 10:52:27] [control pipe]   Writing to pipe     (ControlPipe.pyo|213)
[8] [Oct 28 10:52:27] [control pipe]   Number of bytes written: 41     (ControlPipe.pyo|220)
[7] [Oct 28 10:52:27] [control pipe]   NTControlPipeConnection exiting     (ControlPipe.pyo|237)
[7] [Oct 28 10:52:30] [control pipe]   Connected to named pipe \\.\pipe\opsiclientd     (ControlPipe.pyo|297)
[7] [Oct 28 10:52:30] [control pipe]   Creating NTControlPipeConnection     (ControlPipe.pyo|298)
[7] [Oct 28 10:52:30] [control pipe]   NTControlPipeConnection initiated     (ControlPipe.pyo|192)
[7] [Oct 28 10:52:30] [control pipe]   NTControlPipeConnection thread started     (ControlPipe.pyo|301)
[6] [Oct 28 10:52:30] [control pipe]   Creating pipe \\.\pipe\opsiclientd     (ControlPipe.pyo|251)
[7] [Oct 28 10:52:30] [control pipe]   Pipe \\.\pipe\opsiclientd created     (ControlPipe.pyo|270)
[7] [Oct 28 10:52:30] [control pipe]   Connecting to named pipe \\.\pipe\opsiclientd     (ControlPipe.pyo|291)
[8] [Oct 28 10:52:30] [control pipe]   Reading fom pipe     (ControlPipe.pyo|207)
[7] [Oct 28 10:52:30] [control pipe]   Received rpc from pipe '{"id": 1, "method": "getBlockLogin", "params": []}'     (ControlPipe.pyo|210)
[5] [Oct 28 10:52:30] [json rpc]   -----> Executing: getBlockLogin()     (JsonRpc.pyo|95)
[8] [Oct 28 10:52:30] [opsiclientd]   Interface method name 'backend_exit' params []     (ControlPipe.pyo|399)
[8] [Oct 28 10:52:30] [opsiclientd]   Interface method name 'backend_getInterface' params []     (ControlPipe.pyo|399)
[8] [Oct 28 10:52:30] [opsiclientd]   Interface method name 'backend_info' params []     (ControlPipe.pyo|399)
[8] [Oct 28 10:52:30] [opsiclientd]   Interface method name 'exit' params []     (ControlPipe.pyo|399)
[8] [Oct 28 10:52:30] [opsiclientd]   Interface method name 'getBlockLogin' params []     (ControlPipe.pyo|399)
[8] [Oct 28 10:52:30] [opsiclientd]   Interface method name 'getInterface' params []     (ControlPipe.pyo|399)
[8] [Oct 28 10:52:30] [opsiclientd]   Interface method name 'getPossibleMethods_listOfHashes' params []     (ControlPipe.pyo|399)
[8] [Oct 28 10:52:30] [opsiclientd]   Interface method name 'isRebootRequested' params []     (ControlPipe.pyo|399)
[8] [Oct 28 10:52:30] [opsiclientd]   Interface method name 'isRebootTriggered' params []     (ControlPipe.pyo|399)
[8] [Oct 28 10:52:30] [opsiclientd]   Interface method name 'isShutdownRequested' params []     (ControlPipe.pyo|399)
[8] [Oct 28 10:52:30] [opsiclientd]   Interface method name 'isShutdownTriggered' params []     (ControlPipe.pyo|399)
[5] [Oct 28 10:52:30] [opsiclientd]   rpc getBlockLogin: blockLogin is 'True'     (ControlPipe.pyo|425)
[6] [Oct 28 10:52:30] [json rpc]   Got result     (JsonRpc.pyo|123)
[8] [Oct 28 10:52:30] [json rpc]   Result is: True     (JsonRpc.pyo|124)
[8] [Oct 28 10:52:30] [control pipe]   Writing to pipe     (ControlPipe.pyo|213)
[8] [Oct 28 10:52:30] [control pipe]   Number of bytes written: 41     (ControlPipe.pyo|220)
[7] [Oct 28 10:52:30] [control pipe]   NTControlPipeConnection exiting     (ControlPipe.pyo|237)
[7] [Oct 28 10:52:33] [control pipe]   Connected to named pipe \\.\pipe\opsiclientd     (ControlPipe.pyo|297)
[7] [Oct 28 10:52:33] [control pipe]   Creating NTControlPipeConnection     (ControlPipe.pyo|298)
[7] [Oct 28 10:52:33] [control pipe]   NTControlPipeConnection initiated     (ControlPipe.pyo|192)
[7] [Oct 28 10:52:33] [control pipe]   NTControlPipeConnection thread started     (ControlPipe.pyo|301)
[8] [Oct 28 10:52:33] [control pipe]   Reading fom pipe     (ControlPipe.pyo|207)
[6] [Oct 28 10:52:33] [control pipe]   Creating pipe \\.\pipe\opsiclientd     (ControlPipe.pyo|251)
[7] [Oct 28 10:52:33] [control pipe]   Received rpc from pipe '{"id": 1, "method": "getBlockLogin", "params": []}'     (ControlPipe.pyo|210)
[5] [Oct 28 10:52:33] [json rpc]   -----> Executing: getBlockLogin()     (JsonRpc.pyo|95)
[7] [Oct 28 10:52:33] [control pipe]   Pipe \\.\pipe\opsiclientd created     (ControlPipe.pyo|270)
[8] [Oct 28 10:52:33] [opsiclientd]   Interface method name 'backend_exit' params []     (ControlPipe.pyo|399)
[7] [Oct 28 10:52:33] [control pipe]   Connecting to named pipe \\.\pipe\opsiclientd     (ControlPipe.pyo|291)
[8] [Oct 28 10:52:33] [opsiclientd]   Interface method name 'backend_getInterface' params []     (ControlPipe.pyo|399)
[8] [Oct 28 10:52:33] [opsiclientd]   Interface method name 'backend_info' params []     (ControlPipe.pyo|399)
[8] [Oct 28 10:52:33] [opsiclientd]   Interface method name 'exit' params []     (ControlPipe.pyo|399)
[8] [Oct 28 10:52:33] [opsiclientd]   Interface method name 'getBlockLogin' params []     (ControlPipe.pyo|399)
[8] [Oct 28 10:52:33] [opsiclientd]   Interface method name 'getInterface' params []     (ControlPipe.pyo|399)
[8] [Oct 28 10:52:33] [opsiclientd]   Interface method name 'getPossibleMethods_listOfHashes' params []     (ControlPipe.pyo|399)
[8] [Oct 28 10:52:33] [opsiclientd]   Interface method name 'isRebootRequested' params []     (ControlPipe.pyo|399)
[8] [Oct 28 10:52:33] [opsiclientd]   Interface method name 'isRebootTriggered' params []     (ControlPipe.pyo|399)
[8] [Oct 28 10:52:33] [opsiclientd]   Interface method name 'isShutdownRequested' params []     (ControlPipe.pyo|399)
[8] [Oct 28 10:52:33] [opsiclientd]   Interface method name 'isShutdownTriggered' params []     (ControlPipe.pyo|399)
[5] [Oct 28 10:52:33] [opsiclientd]   rpc getBlockLogin: blockLogin is 'True'     (ControlPipe.pyo|425)
[6] [Oct 28 10:52:33] [json rpc]   Got result     (JsonRpc.pyo|123)
[8] [Oct 28 10:52:33] [json rpc]   Result is: True     (JsonRpc.pyo|124)
[8] [Oct 28 10:52:33] [control pipe]   Writing to pipe     (ControlPipe.pyo|213)
[8] [Oct 28 10:52:33] [control pipe]   Number of bytes written: 41     (ControlPipe.pyo|220)
[7] [Oct 28 10:52:33] [control pipe]   NTControlPipeConnection exiting     (ControlPipe.pyo|237)
[7] [Oct 28 10:52:37] [control pipe]   Connected to named pipe \\.\pipe\opsiclientd     (ControlPipe.pyo|297)
[7] [Oct 28 10:52:37] [control pipe]   Creating NTControlPipeConnection     (ControlPipe.pyo|298)
[7] [Oct 28 10:52:37] [control pipe]   NTControlPipeConnection initiated     (ControlPipe.pyo|192)
[7] [Oct 28 10:52:37] [control pipe]   NTControlPipeConnection thread started     (ControlPipe.pyo|301)
[8] [Oct 28 10:52:37] [control pipe]   Reading fom pipe     (ControlPipe.pyo|207)
[6] [Oct 28 10:52:37] [control pipe]   Creating pipe \\.\pipe\opsiclientd     (ControlPipe.pyo|251)
[7] [Oct 28 10:52:37] [control pipe]   Pipe \\.\pipe\opsiclientd created     (ControlPipe.pyo|270)
[7] [Oct 28 10:52:37] [control pipe]   Connecting to named pipe \\.\pipe\opsiclientd     (ControlPipe.pyo|291)
[7] [Oct 28 10:52:37] [control pipe]   Received rpc from pipe '{"id": 1, "method": "getBlockLogin", "params": []}'     (ControlPipe.pyo|210)
[5] [Oct 28 10:52:37] [json rpc]   -----> Executing: getBlockLogin()     (JsonRpc.pyo|95)
[8] [Oct 28 10:52:37] [opsiclientd]   Interface method name 'backend_exit' params []     (ControlPipe.pyo|399)
[8] [Oct 28 10:52:37] [opsiclientd]   Interface method name 'backend_getInterface' params []     (ControlPipe.pyo|399)
[8] [Oct 28 10:52:37] [opsiclientd]   Interface method name 'backend_info' params []     (ControlPipe.pyo|399)
[8] [Oct 28 10:52:37] [opsiclientd]   Interface method name 'exit' params []     (ControlPipe.pyo|399)
[8] [Oct 28 10:52:37] [opsiclientd]   Interface method name 'getBlockLogin' params []     (ControlPipe.pyo|399)
[8] [Oct 28 10:52:37] [opsiclientd]   Interface method name 'getInterface' params []     (ControlPipe.pyo|399)
[8] [Oct 28 10:52:37] [opsiclientd]   Interface method name 'getPossibleMethods_listOfHashes' params []     (ControlPipe.pyo|399)
[8] [Oct 28 10:52:37] [opsiclientd]   Interface method name 'isRebootRequested' params []     (ControlPipe.pyo|399)
[8] [Oct 28 10:52:37] [opsiclientd]   Interface method name 'isRebootTriggered' params []     (ControlPipe.pyo|399)
[8] [Oct 28 10:52:37] [opsiclientd]   Interface method name 'isShutdownRequested' params []     (ControlPipe.pyo|399)
[8] [Oct 28 10:52:37] [opsiclientd]   Interface method name 'isShutdownTriggered' params []     (ControlPipe.pyo|399)
[5] [Oct 28 10:52:37] [opsiclientd]   rpc getBlockLogin: blockLogin is 'True'     (ControlPipe.pyo|425)
[6] [Oct 28 10:52:37] [json rpc]   Got result     (JsonRpc.pyo|123)
[8] [Oct 28 10:52:37] [json rpc]   Result is: True     (JsonRpc.pyo|124)
[8] [Oct 28 10:52:37] [control pipe]   Writing to pipe     (ControlPipe.pyo|213)
[8] [Oct 28 10:52:37] [control pipe]   Number of bytes written: 41     (ControlPipe.pyo|220)
[7] [Oct 28 10:52:37] [control pipe]   NTControlPipeConnection exiting     (ControlPipe.pyo|237)
[7] [Oct 28 10:52:41] [control pipe]   Connected to named pipe \\.\pipe\opsiclientd     (ControlPipe.pyo|297)
[7] [Oct 28 10:52:41] [control pipe]   Creating NTControlPipeConnection     (ControlPipe.pyo|298)
[7] [Oct 28 10:52:41] [control pipe]   NTControlPipeConnection initiated     (ControlPipe.pyo|192)
[8] [Oct 28 10:52:41] [control pipe]   Reading fom pipe     (ControlPipe.pyo|207)
[7] [Oct 28 10:52:41] [control pipe]   NTControlPipeConnection thread started     (ControlPipe.pyo|301)
[6] [Oct 28 10:52:41] [control pipe]   Creating pipe \\.\pipe\opsiclientd     (ControlPipe.pyo|251)
[7] [Oct 28 10:52:41] [control pipe]   Pipe \\.\pipe\opsiclientd created     (ControlPipe.pyo|270)
[7] [Oct 28 10:52:41] [control pipe]   Connecting to named pipe \\.\pipe\opsiclientd     (ControlPipe.pyo|291)
[7] [Oct 28 10:52:41] [control pipe]   Received rpc from pipe '{"id": 1, "method": "getBlockLogin", "params": []}'     (ControlPipe.pyo|210)
[5] [Oct 28 10:52:41] [json rpc]   -----> Executing: getBlockLogin()     (JsonRpc.pyo|95)
[8] [Oct 28 10:52:41] [opsiclientd]   Interface method name 'backend_exit' params []     (ControlPipe.pyo|399)
[8] [Oct 28 10:52:41] [opsiclientd]   Interface method name 'backend_getInterface' params []     (ControlPipe.pyo|399)
[8] [Oct 28 10:52:41] [opsiclientd]   Interface method name 'backend_info' params []     (ControlPipe.pyo|399)
[8] [Oct 28 10:52:41] [opsiclientd]   Interface method name 'exit' params []     (ControlPipe.pyo|399)
[8] [Oct 28 10:52:41] [opsiclientd]   Interface method name 'getBlockLogin' params []     (ControlPipe.pyo|399)
[8] [Oct 28 10:52:41] [opsiclientd]   Interface method name 'getInterface' params []     (ControlPipe.pyo|399)
[8] [Oct 28 10:52:41] [opsiclientd]   Interface method name 'getPossibleMethods_listOfHashes' params []     (ControlPipe.pyo|399)
[8] [Oct 28 10:52:41] [opsiclientd]   Interface method name 'isRebootRequested' params []     (ControlPipe.pyo|399)
[8] [Oct 28 10:52:41] [opsiclientd]   Interface method name 'isRebootTriggered' params []     (ControlPipe.pyo|399)
[8] [Oct 28 10:52:41] [opsiclientd]   Interface method name 'isShutdownRequested' params []     (ControlPipe.pyo|399)
[8] [Oct 28 10:52:41] [opsiclientd]   Interface method name 'isShutdownTriggered' params []     (ControlPipe.pyo|399)
[5] [Oct 28 10:52:41] [opsiclientd]   rpc getBlockLogin: blockLogin is 'True'     (ControlPipe.pyo|425)
[6] [Oct 28 10:52:41] [json rpc]   Got result     (JsonRpc.pyo|123)
[8] [Oct 28 10:52:41] [json rpc]   Result is: True     (JsonRpc.pyo|124)
[8] [Oct 28 10:52:41] [control pipe]   Writing to pipe     (ControlPipe.pyo|213)
[8] [Oct 28 10:52:41] [control pipe]   Number of bytes written: 41     (ControlPipe.pyo|220)
[7] [Oct 28 10:52:42] [control pipe]   NTControlPipeConnection exiting     (ControlPipe.pyo|237)
[7] [Oct 28 10:52:45] [control pipe]   Connected to named pipe \\.\pipe\opsiclientd     (ControlPipe.pyo|297)
[7] [Oct 28 10:52:45] [control pipe]   Creating NTControlPipeConnection     (ControlPipe.pyo|298)
[7] [Oct 28 10:52:45] [control pipe]   NTControlPipeConnection initiated     (ControlPipe.pyo|192)
[8] [Oct 28 10:52:45] [control pipe]   Reading fom pipe     (ControlPipe.pyo|207)
[7] [Oct 28 10:52:45] [control pipe]   NTControlPipeConnection thread started     (ControlPipe.pyo|301)
[6] [Oct 28 10:52:45] [control pipe]   Creating pipe \\.\pipe\opsiclientd     (ControlPipe.pyo|251)
[7] [Oct 28 10:52:45] [control pipe]   Pipe \\.\pipe\opsiclientd created     (ControlPipe.pyo|270)
[7] [Oct 28 10:52:45] [control pipe]   Connecting to named pipe \\.\pipe\opsiclientd     (ControlPipe.pyo|291)
[7] [Oct 28 10:52:45] [control pipe]   Received rpc from pipe '{"id": 1, "method": "getBlockLogin", "params": []}'     (ControlPipe.pyo|210)
[5] [Oct 28 10:52:45] [json rpc]   -----> Executing: getBlockLogin()     (JsonRpc.pyo|95)
------------------Ende Ausschnitt------------------------------

Ich hoffe jemand kann hier helfen. Vielen Dank schon mal.

Ich verwende OPSI 4.0, client-agent 4.0-5 und winst 4.10.8.6-1
Die Clients sind Windows 7 Professional 32 bit
Nach oben
Benutzeravatar
d.oertel
uib-Team
Beiträge: 3327
Registriert: 04 Jun 2008, 14:27

Re: Problem bei Inst. von Localboot-Prod. - 'getListOfProducts'

Beitrag von d.oertel »

Hi,

die Meldung:
'getListOfProducts
kommt vom winst der an dieser Stelle gestartet wird.

Code: Alles auswählen

[5] [Oct 28 10:52:20] [action_processor_starter.exe]   Running command '"C:\Program Files\opsi.org\opsi-client-agent\\opsi-winst\\winst32.exe" /opsiservice "https://stratos-s-opsi-1:4447/rpc" /clientid stratos-nb-men.stratos.local /username stratos-nb-men.stratos.local /password 4b8a9b9a80524c57c4b9f71929662988' as user 'pcpatch' on desktop 'winlogon'  (Windows.pyo|1132)
[6] [Oct 28 10:52:20] [action_processor_starter.exe]   Process startet, pid: 3536  (Windows.pyo|1136)
[6] [Oct 28 10:52:20] [action_processor_starter.exe]   Waiting for process ending: 3536 (timeout: 10800 seconds)  (Windows.pyo|1139)
Wenn der winst dann hängt wartet der opsiclientd sehr lange darauf das dieser endlich fertig wird und teilt dem loginblocker über eine Pipe mit er soll weiter blocken.

Wo das Problem liegt erfahren wir hier nicht. Dazu brauchen wir die Logdatei des winst (instlog.txt).

gruss
d.oertel


Vielen Dank für die Nutzung von opsi. Im Forum ist unser Support begrenzt.

Für den professionellen Einsatz und individuelle Beratung empfehlen wir einen Support-Vertrag und eine Schulung.
Gerne informieren wir Sie zu unserem Angebot.

uib GmbH
Telefon: +49 6131 27561 0
E-Mail: sales@uib.de


Nach oben
it-service
Beiträge: 16
Registriert: 11 Mär 2010, 15:23
Wohnort: Bad Lausick
Kontaktdaten:
Kontaktdaten von it-service

Re: Problem bei Inst. von Localboot-Prod. - 'getListOfProducts'

Beitrag von it-service »

Hallo Herr Oertel,

danke für die Antwort. Das ist immerhin schon mal eine Spur. Ich wollte gerade in die instlog schauen und habe gesehen, dass diese auf keinem der betroffenen Clients vorhanden ist. Ich vermute nun, dass trotz aller Berechtigungen, unsere Antiviren-Software (F-Secure) dazwischen funkt.

mfg
Nach oben
Benutzeravatar
d.oertel
uib-Team
Beiträge: 3327
Registriert: 04 Jun 2008, 14:27

Re: Problem bei Inst. von Localboot-Prod. - 'getListOfProducts'

Beitrag von d.oertel »

Hi,

sollte sich herausstellen das F-Secure den winst32.exe blockt, so bitte uns bescheid sagen, damit wir auf den Hersteller zugehen können.
Natürlich fällt der winst in die Kategorie 'potentiell gefählicher code' da hier naturgemäß jedemenge routinen vorhanden sind um ein system zu manipulieren.

gruss
d.oertel


Vielen Dank für die Nutzung von opsi. Im Forum ist unser Support begrenzt.

Für den professionellen Einsatz und individuelle Beratung empfehlen wir einen Support-Vertrag und eine Schulung.
Gerne informieren wir Sie zu unserem Angebot.

uib GmbH
Telefon: +49 6131 27561 0
E-Mail: sales@uib.de


Nach oben
it-service
Beiträge: 16
Registriert: 11 Mär 2010, 15:23
Wohnort: Bad Lausick
Kontaktdaten:
Kontaktdaten von it-service

Re: Problem bei Inst. von Localboot-Prod. - 'getListOfProducts'

Beitrag von it-service »

Hallo Herr Oertel,

also F-Secure ist nicht das Problem. Die erfolgreich installierten Clients haben die gleichen Richtlinien und die Logs von F-Secure geben auch nichts in Verbindung mit der winst32.exe oder dem opsiclientd aus.
Den einzigen Unterschied zwischen den Clients den ich noch feststellen konnte ist die BIOS-Version. Werde das diese Woche mal noch überprüfen.

mfg
Nach oben
Benutzeravatar
wolfbardo
uib-Team
Beiträge: 1410
Registriert: 01 Jul 2008, 12:10

Re: Problem bei Inst. von Localboot-Prod. - 'getListOfProducts'

Beitrag von wolfbardo »

Hallo,
it-service hat geschrieben:F-Secure geben auch nichts in Verbindung mit der winst32.exe oder dem opsiclientd aus.
normalerweise fragt F-Secure schon nach, ob der opsiclientd über https Kommunizieren darf

Gruss
Bardo Wolf


Vielen Dank für die Nutzung von opsi. Im Forum ist unser Support begrenzt.

Für den professionellen Einsatz und individuelle Beratung empfehlen wir einen Support-Vertrag und eine Schulung.
Gerne informieren wir Sie zu unserem Angebot.

uib GmbH
Telefon: +49 6131 27561 0
E-Mail: sales@uib.de


Nach oben
it-service
Beiträge: 16
Registriert: 11 Mär 2010, 15:23
Wohnort: Bad Lausick
Kontaktdaten:
Kontaktdaten von it-service

Re: Problem bei Inst. von Localboot-Prod. - 'getListOfProducts'

Beitrag von it-service »

Das sollte normalerweise auch so sein. Jedoch sind weder auf dem F-Secure-Server noch auf den Clients Einträge in Verbindung mit OPSI in den Alarmprotokollen und Berichten vermerkt.
Wenn es wirklich mit F-Secure zu tun hat, dann ist es merkwürdig, dass es bei einem gleichartig konfigurierten Client problemlos funktioniert. Wenn ich die winst32.exe per Hand auf dem Client starte dann verhält sich F-Secure ruhig.

mfg
Nach oben
Benutzeravatar
d.oertel
uib-Team
Beiträge: 3327
Registriert: 04 Jun 2008, 14:27

Re: Problem bei Inst. von Localboot-Prod. - 'getListOfProducts'

Beitrag von d.oertel »

Hi,

meldet den der Server in der opsiconfd log einen kontakt mit dem Winst ?
Welche Winstversion ?
Welches Server OS ?

Schon mal den probiert:
http://download.uib.de/opsi4.0/experime ... 8.7-1.opsi

gruss
d.oertel


Vielen Dank für die Nutzung von opsi. Im Forum ist unser Support begrenzt.

Für den professionellen Einsatz und individuelle Beratung empfehlen wir einen Support-Vertrag und eine Schulung.
Gerne informieren wir Sie zu unserem Angebot.

uib GmbH
Telefon: +49 6131 27561 0
E-Mail: sales@uib.de


Nach oben
it-service
Beiträge: 16
Registriert: 11 Mär 2010, 15:23
Wohnort: Bad Lausick
Kontaktdaten:
Kontaktdaten von it-service

Re: Problem bei Inst. von Localboot-Prod. - 'getListOfProducts'

Beitrag von it-service »

Hallo Herr Oertel,

mit dieser Winst-Version funktioniert es (zumind. erstmal bei einem, werde weitere nachziehen). Habe die Installation aber auch über einen Gigabit-Netzwerk-Anschluss gemacht. Vorher in einem anderen Gebäudeteil war es ein 100Mbit Netzwerkanschluss. Könnte das Problem evtl. auch damit zusammenhängen?

mfg
Nach oben
it-service
Beiträge: 16
Registriert: 11 Mär 2010, 15:23
Wohnort: Bad Lausick
Kontaktdaten:
Kontaktdaten von it-service

Re: Problem bei Inst. von Localboot-Prod. - 'getListOfProducts'

Beitrag von it-service »

Das Problem scheint gelöst...
nachdem es bei einem weiteren Rechner wieder NICHT funktioniert und es nun auch keine Unterschiede zwischen den Clients gab, haben wir uns nochmal F-Secure zur Brust genommen. In der Server Management Console gibt es unter 'Anwendungssteuerung' den Punkt 'Systemsteuerungsintegrierung'. Wenn diese Option deaktiviert wird funktioniert es wunderbar. Wahrscheinlich gab es ein Problem mit der Verteilung der Richtlinien (F-Secure is halt auch ne tolle Software :-D), denn diese Option war eigentlich standardmäßig schon deaktiviert, da sie uns schon bei der Verteilung von Domänen-Gruppen-Richtlinien das Genick gebrochen hat. Damit keine Mißverständnisse auftreten. Es ist nicht die Anwendungssteuerung (hier haben wir schon vorher den opsiclientd und die winst32.exe in die whitelist aufgenommen) an sich deaktiviert, sondern nur die eben genannte Option.

mfg und danke für die Unterstützung
Nach oben
Antworten

Zurück zu „Freier Support“