ProjectLibre

Adaptation of the opsi-template scripts for ProjectLibre.
ProjectLibre is an open-source fork of OpenProj. Before it was OpenProj it was even something else: http://en.wikipedia.org/wiki/ProjectLibre
Get the MSI here: http://sourceforge.net/projects/projectlibre/files/ProjectLibre/1.5.9/

control file

[Package]
version: 1
depends: 
incremental: False
 
[Product]
type: localboot
id: projectlibre
name: ProjectLibre
description: ProjectLibre is a project management software system.
advice: Install this fork of OpenProj if you need a Microsoft Project-style project management suite.
version: 1.5.9
priority: 0
licenseRequired: False
productClasses: 
setupScript: setup3264.ins
uninstallScript: uninstall3264.ins
updateScript: 
alwaysScript: 
onceScript: 
customScript: 
userLoginScript: 
 
[ProductDependency]
action: setup
requiredProduct: java-runtime
requiredStatus: installed
 
[Changelog]
projectlibre (1.5.9-1) testing; urgency=low
 
  * Initial package
 
 -- ICT <ict@gcecad-service.nl>  Thu, 08 May 2014 14:58:19 +0000

setup3264.ins

; Copyright (c) uib gmbh (www.uib.de)
; This sourcecode is owned by uib
; and published under the Terms of the General Public License.
; credits: http://www.opsi.org/en/credits/
;
; License Management removed
 
 
[Actions]
requiredWinstVersion >= "4.10.8.6"
 
;DefVar $MsiId32$
;DefVar $UninstallProgram32$
;DefVar $MsiId64$
;DefVar $UninstallProgram64$
DefVar $LogDir$
DefVar $ProductId$  
DefVar $MinimumSpace$
DefVar $InstallDir32$
;DefVar $InstallDir64$
DefVar $ExitCode$
DefVar $INST_SystemType$
;DefVar $INST_architecture$
DefVar $INST_MsVersion$
 
set $INST_MsVersion$ = GetMsVersionInfo
Set $INST_SystemType$ = GetSystemType
;set $INST_architecture$ = GetProductProperty("install_architecture","system specific")
Set $LogDir$ = "%SystemDrive%\tmp"
 
; ----------------------------------------------------------------
; - Please edit the following values                             -
; ----------------------------------------------------------------
;$ProductId$ should be the name of the product in opsi
; therefore please: only lower letters, no umlauts, 
; no white space use '-' as a seperator
Set $ProductId$       = "projectlibre"
Set $MinimumSpace$    = "500 MB"
; the path were we find the product after the installation
Set $InstallDir32$      = "%ProgramFiles32Dir%\ProjectLibre"
;Set $InstallDir64$      = "%ProgramFiles64Dir%\<path to the product>"
; ----------------------------------------------------------------
 
if not(HasMinimumSpace ("%SystemDrive%", $MinimumSpace$))
	LogError "Not enough space on %SystemDrive%, " + $MinimumSpace$ + " on drive %SystemDrive% needed for " + $ProductId$
	isFatalError
	; Stop process and set installation status to failed
endif
if $INST_MsVersion$ < "5.1"
	LogError "Windows XP or newer is required for " + $ProductId$  
	isFatalError
endif
 
comment "Show product picture"
ShowBitmap "%ScriptPath%\" + $ProductId$ + ".png" $ProductId$
 
if FileExists("%ScriptPath%\delsub3264.ins")
	comment "Start uninstall sub section"
	Sub "%ScriptPath%\delsub3264.ins"
endif
 
comment "installing"
 
if ($INST_SystemType$ = "x86 System") 
;and ($INST_architecture$ = "system specific")) or ($INST_architecture$ = "both") or ($INST_architecture$ = "32 only")
	Message "Installing " + $ProductId$ + "..."
	comment "Start setup program"
	Winbatch_install_32
	Sub_check_exitcode
	comment "Copy files"
;	Files_install_32 /32Bit
	comment "Patch Registry"
;	Registry_install /32Bit
	Registry_install_AllProfiles /AllNTUserDats
	comment "Create shortcuts"
	LinkFolder_install_32
endif
 
if ($INST_SystemType$ = "64 Bit System") 
;and (($INST_architecture$ = "system specific") or ($INST_architecture$ = "both") or ($INST_architecture$ = "64 only"))
	Message "Installing " + $ProductId$ + "..."
	comment "Start setup program"
	Winbatch_install_32
	Sub_check_exitcode
	comment "Copy files"
;	Files_install_64 /64Bit
	comment "Patch Registry"
;	Registry_install /64Bit
	Registry_install_AllProfiles /AllNTUserDats
	comment "Create shortcuts"
	LinkFolder_install_64
endif
 
 
[Winbatch_install_32]
"%SystemRoot%\system32\msiexec.exe" /qb! /package "%ScriptPath%\files\projectlibre-1.5.9.msi" ALLUSERS=2
 
;[Files_install_32]
 
;[Winbatch_install_64]
 
;[Files_install_64]
 
;[Registry_install]
 
[Registry_install_AllProfiles]
openkey [HKEY_CURRENT_USER\Software\JavaSoft\Prefs\com\projity\dialog]
set "validated/License" = "true"
set "user/Email" = ""
set "/Show/Tip/On/Startup" = "false"
 
; Remove stored start menu order
deletekey [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\MenuOrder\Start Menu]
 
[LinkFolder_install_32]
set_basefolder common_programs
set_subfolder ProjectLibre
set_link
	name: ProjectLibre
 	target: "%ProgramFiles32Dir%\Java\jre7\bin\javaw.exe"
 	parameters: -Xms128m -Xmx768m -jar "$InstallDir32$\projectlibre.jar"
 	working_dir: $InstallDir32$
 	icon_file: "$InstallDir32$\projectlibre.exe"
 	icon_index: 0
end_link
 
[LinkFolder_install_64]
set_basefolder common_programs
set_subfolder ProjectLibre
set_link
	name: ProjectLibre
 	target: "%ProgramFiles64Dir%\Java\jre7\bin\javaw.exe"
 	parameters: -Xms128m -Xmx768m -jar "$InstallDir32$\projectlibre.jar"
 	working_dir: $InstallDir32$
 	icon_file: "$InstallDir32$\projectlibre.exe"
 	icon_index: 0
end_link
 
[Sub_check_exitcode]
comment "Test for installation success via exit code"
set $ExitCode$ = getLastExitCode
; informations to exit codes see
; http://msdn.microsoft.com/en-us/library/aa372835(VS.85).aspx
; http://msdn.microsoft.com/en-us/library/aa368542.aspx
if ($ExitCode$ = "0")
	comment "Looks good: setup program gives exitcode zero"
else
	comment "Setup program gives a exitcode unequal zero: " + $ExitCode$
	if ($ExitCode$ = "1605")
		comment "ERROR_UNKNOWN_PRODUCT	1605	This action is only valid for products that are currently installed."
		comment "Uninstall of a not installed product failed - no problem"
	else
		if ($ExitCode$ = "1641")
			comment "looks good: setup program gives exitcode 1641"
			comment "ERROR_SUCCESS_REBOOT_INITIATED	1641	The installer has initiated a restart. This message is indicative of a success."
		else
			if ($ExitCode$ = "3010")
				comment "looks good: setup program gives exitcode 3010"
				comment "ERROR_SUCCESS_REBOOT_REQUIRED	3010	A restart is required to complete the install. This message is indicative of a success."
			else
				logError "Fatal: Setup program gives an unknown exitcode unequal zero: " + $ExitCode$
				isFatalError
			endif
		endif
	endif
endif

uninstall3264.ins

; Copyright (c) uib gmbh (www.uib.de)
; This sourcecode is owned by uib gmbh
; and published under the Terms of the General Public License.
; credits: http://www.opsi.org/en/credits/
;
; License Management removed
 
[Actions]
requiredWinstVersion >= "4.10.8.6"
 
;DefVar $MsiId32$
;DefVar $UninstallProgram32$
;DefVar $MsiId64$
;DefVar $UninstallProgram64$
DefVar $LogDir$
DefVar $ExitCode$
DefVar $ProductId$
DefVar $InstallDir32$
;DefVar $InstallDir64$
DefVar $INST_SystemType$
;DefVar $INST_architecture$
 
Set $INST_SystemType$ = GetSystemType
;set $INST_architecture$ = GetProductProperty("install_architecture","system specific")
 
 
Set $LogDir$ = "%SystemDrive%\tmp"
 
; ----------------------------------------------------------------
; - Please edit the following values                             -
; ----------------------------------------------------------------
Set $ProductId$       = "projectlibre"
Set $InstallDir32$    = "%ProgramFiles32Dir%\ProjectLibre"
;Set $InstallDir64$    = "%ProgramFiles64Dir%\<path to the product>"
; ----------------------------------------------------------------
 
 
comment "Show product picture"
ShowBitmap "%ScriptPath%\" + $ProductId$ + ".png" $ProductId$
 
Message "Uninstalling " + $ProductId$ + " ..."
 
if FileExists("%ScriptPath%\delsub3264.ins")
	comment "Start uninstall sub section"
	Sub "%ScriptPath%\delsub3264.ins"
endif

delsub3264.ins

; Copyright (c) uib gmbh (www.uib.de)
; This sourcecode is owned by uib gmbh
; and published under the Terms of the General Public License.
; credits: http://www.opsi.org/en/credits/
;
; License Management removed
 
 
DefStringList $result$
DefStringList $result1$
DefVar $appKey$
DefVar $UninstallCommandList$
DefVar $appString$
DefVar $appKeyString$
DefVar $testName$
;DefVar $exeString$
 
Set $appKeyString$ = "DisplayName"
Set $appString$ = "ProjectLibre"
 
;Set $MsiId32$ = '{XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX}'
;Set $UninstallProgram32$ = $InstallDir32$ + "\uninstall.exe"
 
;Set $MsiId64$ = '{XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX}'
;Set $UninstallProgram64$ = $InstallDir64$ + "\uninstall.exe"
 
if ($INST_SystemType$ = "x86 System") 
;and ($INST_architecture$ = "system specific")) or ($INST_architecture$ = "both") or ($INST_architecture$ = "32 only")
	Message "Uninstalling " + $ProductId$ + "..."
 
	Set $result$ = getRegistryKeyList32("HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall")
	for $app$ in $result$ do Sub_searchApp32
	if not ($UninstallCommandList$ = "")
		set $result1$ = splitString($UninstallCommandList$,"::")
		for $UninstallCommand$ in $result1$ do Winbatch_uninstall_32 /32Bit
		sub_check_exitcode
	endif
 
 
;	if FileExists($UninstallProgram32$)
;		comment "Uninstall program found, starting uninstall"
;		Winbatch_uninstall_32
;		sub_check_exitcode
;	endif
 
;	if not (GetRegistryStringValue32("[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\" + $MsiId32$ + "] DisplayName") = "")
;		comment "MSI id " + $MsiId32$ + " found in registry, starting msiexec to uninstall"
;		Winbatch_uninstall_msi_32
;		sub_check_exitcode
;	endif
 
	comment "Delete files"
	Files_uninstall_32 /32Bit
	comment "Cleanup registry"
	Registry_uninstall /32Bit
	Registry_uninstall_AllProfiles /AllNTUserDats
endif
 
if ($INST_SystemType$ = "64 Bit System") 
;and (($INST_architecture$ = "system specific") or ($INST_architecture$ = "both") or ($INST_architecture$ = "64 only"))
	Message "Uninstalling " + $ProductId$ + "..."
 
;	Set $result$ = getRegistryKeyList64("HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall")
;	for $app$ in $result$ do Sub_searchApp64
; 	if not ($UninstallCommandList$ = "")
;		set $result1$ = splitString($UninstallCommandList$,"::")
;		for $UninstallCommand$ in $result1$ do Winbatch_uninstall_64 /64Bit
;		sub_check_exitcode
;	endif
 
	Set $result$ = getRegistryKeyList32("HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall")
	for $app$ in $result$ do Sub_searchApp32
	if not ($UninstallCommandList$ = "")
		set $result1$ = splitString($UninstallCommandList$,"::")
		for $UninstallCommand$ in $result1$ do Winbatch_uninstall_32 /32Bit
		sub_check_exitcode
	endif
 
;	if FileExists($UninstallProgram64$)
;		comment "Uninstall program found, starting uninstall"
;		Winbatch_uninstall_64
;		sub_check_exitcode
;	endif
 
;	if not (GetRegistryStringValue64("[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\" + $MsiId64$ + "] DisplayName") = "")
;		comment "MSI id " + $MsiId64$ + " found in registry, starting msiexec to uninstall"
;		Winbatch_uninstall_msi_64
;		sub_check_exitcode
;	endif
 
	comment "Delete files"
	Files_uninstall_32 /32Bit
	comment "Cleanup registry"
	Registry_uninstall /64Bit
	Registry_uninstall_AllProfiles /AllNTUserDats
endif
 
comment "Delete program shortcuts"
LinkFolder_uninstall
 
[Winbatch_uninstall_32]
$UninstallCommand$
 
[Files_uninstall_32]
delete -sf "$InstallDir32$\"
 
[Winbatch_uninstall_64]
$UninstallCommand$
 
;[Files_uninstall_64]
;delete -sf "$InstallDir64$\"
 
[Registry_uninstall]
; Example of deleting a registry key:
;
; deletekey [HKEY_LOCAL_MACHINE\Software\$ProductId$]
 
[Registry_uninstall_AllProfiles]
deletekey [HKEY_CURRENT_USER\Software\JavaSoft\Prefs\com\projity]
 
[LinkFolder_uninstall]
set_basefolder common_programs
delete_subfolder ProjectLibre
 
 
[Sub_check_exitcode]
comment "Test for installation success via exit code"
set $ExitCode$ = getLastExitCode
; informations to exit codes see
; http://msdn.microsoft.com/en-us/library/aa372835(VS.85).aspx
; http://msdn.microsoft.com/en-us/library/aa368542.aspx
if ($ExitCode$ = "0")
	comment "Looks good: setup program gives exitcode zero"
else
	comment "Setup program gives a exitcode unequal zero: " + $ExitCode$
	if ($ExitCode$ = "1605")
		comment "ERROR_UNKNOWN_PRODUCT	1605	This action is only valid for products that are currently installed."
		comment "Uninstall of a not installed product failed - no problem"
	else
		if ($ExitCode$ = "1641")
			comment "looks good: setup program gives exitcode 1641"
			comment "ERROR_SUCCESS_REBOOT_INITIATED	1641	The installer has initiated a restart. This message is indicative of a success."
		else
			if ($ExitCode$ = "3010")
				comment "looks good: setup program gives exitcode 3010"
				comment "ERROR_SUCCESS_REBOOT_REQUIRED	3010	A restart is required to complete the install. This message is indicative of a success."
			else
				logError "Fatal: Setup program gives an unknown exitcode unequal zero: " + $ExitCode$
				isFatalError
			endif
		endif
	endif
endif
 
[Sub_searchApp32]
set $appKey$ = "[HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\" + "$app$" + "] " + $appKeyString$
Set $testName$ = GetRegistryStringValue32($appKey$)
if contains($testName$,$appString$)
;	set $appKey$ = "[HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\" + "$app$" + "] UninstallString"
;	Set $testName$ = GetRegistryStringValue32($appKey$)
	;if contains(lower($testName$),lower("MsiExec.exe"))
	set $UninstallCommandList$ = $UninstallCommandList$ + "MsiExec.exe /x " + "$app$" + " /qb-! REBOOT=ReallySuppress::"
	;else
	;	Set $testName$ = unquote($testName$,'"')
	;	Set $testName$ = unquote($testName$,"'")
	;	Set $exeString$ = takeString(0, splitString ($testName$, "exe"))
	;	set $UninstallCommandList$ = $UninstallCommandList$ + $exeString$ + "exe /S::"
	;endif
endif
 
[Sub_searchApp64]
set $appKey$ = "[HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\" + "$app$" + "] " + $appKeyString$
Set $testName$ = GetRegistryStringValue64($appKey$)
if contains($testName$,$appString$)
;	set $appKey$ = "[HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\" + "$app$" + "] UninstallString"
;	Set $testName$ = GetRegistryStringValue64($appKey$)
	;if contains(lower($testName$),lower("MsiExec.exe"))
	set $UninstallCommandList$ = $UninstallCommandList$ + "MsiExec.exe /x " + "$app$" + " /qb-! REBOOT=ReallySuppress::"
	;else
	;	Set $testName$ = unquote($testName$,'"')
	;	Set $testName$ = unquote($testName$,"'")
	;	Set $exeString$ = takeString(0, splitString ($testName$, "exe"))
	;	set $UninstallCommandList$ = $UninstallCommandList$ + '"' + $exeString$ + 'exe /S"::'
	;endif
endif

QR Code
QR Code userspace:projectlibre (generated for current page)