GIMP

Adaptation of the opsi-template scripts for GIMP.
Get your windows installation here: http://download.gimp.org/pub/gimp/v2.8/windows/

we have the following files:
%scriptpath%\files\gimp32.inf
%scriptpath%\files\gimp64.inf
%scriptpath%\files\gimp-2.8.10-setup.exe
%scriptpath%\files\sessionrc

Each luser will get the settings of sessionrc, this is a maximised windows with docked toolbars.

gimp32.inf

[Setup]
Lang=en
Group=(Default)
NoIcons=0
SetupType=custom
Components=gimp32,deps32,deps32\wimp,gs
Tasks=

gimp64.inf

[Setup]
Lang=en
Group=(Default)
NoIcons=0
SetupType=custom
Components=gimp64,deps64,deps64\wimp,gs
Tasks=

sessionrc

# GIMP sessionrc
# 
# This file takes session-specific info (that is info, you want to keep
# between two GIMP sessions).  You are not supposed to edit it manually, but
# of course you can do.  The sessionrc will be entirely rewritten every time
# you quit GIMP.  If this file isn't found, defaults are used.
 
(session-info "toplevel"
    (factory-entry "gimp-single-image-window")
    (position 0 0)
    (size 1152 817)
    (open-on-exit)
    (aux-info
        (left-docks-width "175")
        (right-docks-width "210")
        (maximized "yes"))
    (gimp-toolbox
        (side left)
        (book
            (current-page 0)
            (dockable "gimp-tool-options"
                (tab-style automatic)
                (aux-info
                    (show-button-bar "true")))))
    (gimp-dock
        (side right)
        (book
            (current-page 0)
            (dockable "gimp-layer-list"
                (tab-style automatic)
                (preview-size 32)
                (aux-info
                    (show-button-bar "true")))
            (dockable "gimp-channel-list"
                (tab-style automatic)
                (preview-size 32)
                (aux-info
                    (show-button-bar "true")))
            (dockable "gimp-vectors-list"
                (tab-style automatic)
                (preview-size 32)
                (aux-info
                    (show-button-bar "true")))
            (dockable "gimp-undo-history"
                (tab-style automatic)
                (aux-info
                    (show-button-bar "true"))))
        (book
            (position 405)
            (current-page 0)
            (dockable "gimp-brush-grid"
                (tab-style automatic)
                (aux-info
                    (show-button-bar "true")))
            (dockable "gimp-pattern-grid"
                (tab-style automatic)
                (aux-info
                    (show-button-bar "true")))
            (dockable "gimp-gradient-list"
                (tab-style automatic)
                (aux-info
                    (show-button-bar "true"))))))
 
(hide-docks no)
(single-window-mode yes)
(last-tip-shown 0)
 
# end of sessionrc 

control file

[Package]
version: 1
depends: 
incremental: False
 
[Product]
type: localboot
id: gimp
name: GIMP is the GNU Image Manipulation Program
description: GIMP is a raster graphics editor used for image retouching and editing.
advice: Install this application if you need an Adobe Photoshop replacement.
version: 2.8.10
priority: 0
licenseRequired: False
productClasses: 
setupScript: setup3264.ins
uninstallScript: uninstall3264.ins
updateScript: 
alwaysScript: 
onceScript: 
customScript: 
userLoginScript: 
 
[Changelog]
gimp (2.8.10-1) testing; urgency=low
 
  * Initial package
 
 -- ICT <ict@gcecad-service.nl>  Tue, 06 May 2014 15:17:14 +0000

setup3264.ins

; Copyright (c) uib gmbh (www.uib.de)
; This sourcecode is owned by uib
; and published under the Terms of the General Public License.
; credits: http://www.opsi.org/en/credits/
;
; License Management removed
 
 
[Actions]
requiredWinstVersion >= "4.10.8.6"
 
;DefVar $MsiId32$
DefVar $UninstallProgram32$
;DefVar $MsiId64$
DefVar $UninstallProgram64$
DefVar $LogDir$
DefVar $ProductId$  
DefVar $MinimumSpace$
DefVar $InstallDir32$
DefVar $InstallDir64$
DefVar $ExitCode$
DefVar $INST_SystemType$
;DefVar $INST_architecture$
DefVar $INST_MsVersion$
 
set $INST_MsVersion$ = GetMsVersionInfo
Set $INST_SystemType$ = GetSystemType
;set $INST_architecture$ = GetProductProperty("install_architecture","system specific")
Set $LogDir$ = "%SystemDrive%\tmp"
 
; ----------------------------------------------------------------
; - Please edit the following values                             -
; ----------------------------------------------------------------
;$ProductId$ should be the name of the product in opsi
; therefore please: only lower letters, no umlauts, 
; no white space use '-' as a seperator
Set $ProductId$       = "gimp"
Set $MinimumSpace$    = "500 MB"
; the path were we find the product after the installation
Set $InstallDir32$      = "%ProgramFiles32Dir%\GIMP 2"
Set $InstallDir64$      = "%ProgramFiles64Dir%\GIMP 2"
; ----------------------------------------------------------------
 
if not(HasMinimumSpace ("%SystemDrive%", $MinimumSpace$))
	LogError "Not enough space on %SystemDrive%, " + $MinimumSpace$ + " on drive %SystemDrive% needed for " + $ProductId$
	isFatalError
	; Stop process and set installation status to failed
endif
if $INST_MsVersion$ < "5.1"
	LogError "Windows XP or newer is required for " + $ProductId$  
	isFatalError
endif
 
comment "Show product picture"
ShowBitmap "%ScriptPath%\" + $ProductId$ + ".png" $ProductId$
 
if FileExists("%ScriptPath%\delsub3264.ins")
	comment "Start uninstall sub section"
	Sub "%ScriptPath%\delsub3264.ins"
endif
 
comment "installing"
 
if ($INST_SystemType$ = "x86 System") 
;and ($INST_architecture$ = "system specific")) or ($INST_architecture$ = "both") or ($INST_architecture$ = "32 only")
	Message "Installing " + $ProductId$ + "..."
	comment "Start setup program"
	Winbatch_install_32
	Sub_check_exitcode
	comment "Copy files"
	Files_install_32 /32Bit
	comment "Patch Registry"
	Registry_install /32Bit
	Registry_install_AllProfiles /AllNTUserDats
	comment "Create shortcuts"
	LinkFolder_install
endif
 
if ($INST_SystemType$ = "64 Bit System") 
;and (($INST_architecture$ = "system specific") or ($INST_architecture$ = "both") or ($INST_architecture$ = "64 only"))
	Message "Installing " + $ProductId$ + "..."
	comment "Start setup program"
	Winbatch_install_64
	Sub_check_exitcode
	comment "Copy files"
	Files_install_64 /64Bit
	comment "Patch Registry"
	Registry_install /64Bit
	Registry_install_AllProfiles /AllNTUserDats
	comment "Create shortcuts"
	LinkFolder_install
endif
 
 
[Winbatch_install_32]
"%ScriptPath%\files\gimp-2.8.10-setup.exe" /VERYSILENT /NORESTART /DIR="$InstallDir32$" /LOADINF="%ScriptPath%\files\gimp32.inf"
 
[Files_install_32]
copy "%ScriptPath%\files\sessionrc" "$InstallDir32$\etc\gimp\2.0"
 
[Winbatch_install_64]
"%ScriptPath%\files\gimp-2.8.10-setup.exe" /VERYSILENT /NORESTART /DIR="$InstallDir64$" /LOADINF="%ScriptPath%\files\gimp64.inf"
 
[Files_install_64]
copy "%ScriptPath%\files\sessionrc" "$InstallDir64$\etc\gimp\2.0"
 
[Registry_install]
; Example of setting some values of an registry key:
;
; openkey [HKEY_LOCAL_MACHINE\Software\$ProductId$]
; set "name1" = "some string value"
; set "name2" = REG_DWORD:0001
; set "name3" = REG_BINARY:00 af 99 cd
 
[Registry_install_AllProfiles]
; Remove stored start menu order
deletekey [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\MenuOrder\Start Menu]
 
[LinkFolder_install]
; Example of deleting a folder from AllUsers startmenu:
;
; set_basefolder common_programs
; delete_subfolder $ProductId$
;
; Example of creating an shortcut to the installed exe in AllUsers startmenu:
;
; set_basefolder common_programs
; set_subfolder $ProductId$
;
; set_link
; 	name: $ProductId$
; 	target: <path to the program>
; 	parameters:
; 	working_dir: $InstallDir$
; 	icon_file:
; 	icon_index:
; end_link
;
; Example of creating an shortcut to the installed exe on AllUsers desktop:
;
; set_basefolder common_desktopdirectory
; set_subfolder ""
;
; set_link
; 	name: $ProductId$
; 	target: <path to the program>
; 	parameters: <some_param>
; 	working_dir: $InstallDir$
; 	icon_file: <path to icon file>
; 	icon_index: 2
; end_link
 
 
[Sub_check_exitcode]
comment "Test for installation success via exit code"
set $ExitCode$ = getLastExitCode
; informations to exit codes see
; http://msdn.microsoft.com/en-us/library/aa372835(VS.85).aspx
; http://msdn.microsoft.com/en-us/library/aa368542.aspx
if ($ExitCode$ = "0")
	comment "Looks good: setup program gives exitcode zero"
else
	comment "Setup program gives a exitcode unequal zero: " + $ExitCode$
	if ($ExitCode$ = "1605")
		comment "ERROR_UNKNOWN_PRODUCT	1605	This action is only valid for products that are currently installed."
		comment "Uninstall of a not installed product failed - no problem"
	else
		if ($ExitCode$ = "1641")
			comment "looks good: setup program gives exitcode 1641"
			comment "ERROR_SUCCESS_REBOOT_INITIATED	1641	The installer has initiated a restart. This message is indicative of a success."
		else
			if ($ExitCode$ = "3010")
				comment "looks good: setup program gives exitcode 3010"
				comment "ERROR_SUCCESS_REBOOT_REQUIRED	3010	A restart is required to complete the install. This message is indicative of a success."
			else
				logError "Fatal: Setup program gives an unknown exitcode unequal zero: " + $ExitCode$
				isFatalError
			endif
		endif
	endif
endif

uninstall3264.ins

; Copyright (c) uib gmbh (www.uib.de)
; This sourcecode is owned by uib gmbh
; and published under the Terms of the General Public License.
; credits: http://www.opsi.org/en/credits/
;
; License Management removed
 
[Actions]
requiredWinstVersion >= "4.10.8.6"
 
;DefVar $MsiId32$
DefVar $UninstallProgram32$
;DefVar $MsiId64$
DefVar $UninstallProgram64$
DefVar $LogDir$
DefVar $ExitCode$
DefVar $ProductId$
DefVar $InstallDir32$
DefVar $InstallDir64$
DefVar $INST_SystemType$
;DefVar $INST_architecture$
 
Set $INST_SystemType$ = GetSystemType
;set $INST_architecture$ = GetProductProperty("install_architecture","system specific")
 
 
Set $LogDir$ = "%SystemDrive%\tmp"
 
; ----------------------------------------------------------------
; - Please edit the following values                             -
; ----------------------------------------------------------------
Set $ProductId$       = "gimp"
Set $InstallDir32$    = "%ProgramFiles32Dir%\GIMP 2"
Set $InstallDir64$    = "%ProgramFiles64Dir%\GIMP 2"
; ----------------------------------------------------------------
 
 
comment "Show product picture"
ShowBitmap "%ScriptPath%\" + $ProductId$ + ".png" $ProductId$
 
Message "Uninstalling " + $ProductId$ + " ..."
 
if FileExists("%ScriptPath%\delsub3264.ins")
	comment "Start uninstall sub section"
	Sub "%ScriptPath%\delsub3264.ins"
endif

delsub3264.ins

; Copyright (c) uib gmbh (www.uib.de)
; This sourcecode is owned by uib gmbh
; and published under the Terms of the General Public License.
; credits: http://www.opsi.org/en/credits/
;
; License Management removed
 
 
;DefStringList $result$
;DefStringList $result1$
;DefVar $appKey$
;DefVar $UninstallCommandList$
;DefVar $appString$
;DefVar $appKeyString$
;DefVar $testName$
;DefVar $exeString$
 
;Set $appKeyString$ = "DisplayName"
;Set $appString$ = $ProductId$
 
;Set $MsiId32$ = '{XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX}'
Set $UninstallProgram32$ = $InstallDir32$ + "\uninst\unins000.exe"
 
;Set $MsiId64$ = '{XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX}'
Set $UninstallProgram64$ = $InstallDir64$ + "\uninst\unins000.exe"
 
if ($INST_SystemType$ = "x86 System") 
;and ($INST_architecture$ = "system specific")) or ($INST_architecture$ = "both") or ($INST_architecture$ = "32 only")
	Message "Uninstalling " + $ProductId$ + "..."
 
;	Set $result$ = getRegistryKeyList32("HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall")
;	for $app$ in $result$ do Sub_searchApp32
;	if not ($UninstallCommandList$ = "")
;		set $result1$ = splitString($UninstallCommandList$,"::")
;		for $UninstallCommand$ in $result1$ do Winbatch_uninstall_32 /32Bit
;		sub_check_exitcode
;	endif
 
 
	if FileExists($UninstallProgram32$)
		comment "Uninstall program found, starting uninstall"
		Winbatch_uninstall_32
		sub_check_exitcode
	endif
 
;	if not (GetRegistryStringValue32("[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\" + $MsiId32$ + "] DisplayName") = "")
;		comment "MSI id " + $MsiId32$ + " found in registry, starting msiexec to uninstall"
;		Winbatch_uninstall_msi_32
;		sub_check_exitcode
;	endif
 
	comment "Delete files"
	Files_uninstall_32 /32Bit
	comment "Cleanup registry"
	Registry_uninstall /32Bit
	Registry_uninstall_AllProfiles /AllNTUserDats
endif
 
if ($INST_SystemType$ = "64 Bit System") 
;and (($INST_architecture$ = "system specific") or ($INST_architecture$ = "both") or ($INST_architecture$ = "64 only"))
	Message "Uninstalling " + $ProductId$ + "..."
 
;	Set $result$ = getRegistryKeyList64("HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall")
;	for $app$ in $result$ do Sub_searchApp64
; 	if not ($UninstallCommandList$ = "")
;		set $result1$ = splitString($UninstallCommandList$,"::")
;		for $UninstallCommand$ in $result1$ do Winbatch_uninstall_64 /64Bit
;		sub_check_exitcode
;	endif
 
;	Set $result$ = getRegistryKeyList32("HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall")
;	for $app$ in $result$ do Sub_searchApp32
;	if not ($UninstallCommandList$ = "")
;		set $result1$ = splitString($UninstallCommandList$,"::")
;		for $UninstallCommand$ in $result1$ do Winbatch_uninstall_32 /32Bit
;		sub_check_exitcode
;	endif
 
	if FileExists($UninstallProgram64$)
		comment "Uninstall program found, starting uninstall"
		Winbatch_uninstall_64
		sub_check_exitcode
	endif
 
;	if not (GetRegistryStringValue64("[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\" + $MsiId64$ + "] DisplayName") = "")
;		comment "MSI id " + $MsiId64$ + " found in registry, starting msiexec to uninstall"
;		Winbatch_uninstall_msi_64
;		sub_check_exitcode
;	endif
 
	comment "Delete files"
	Files_uninstall_64 /64Bit
	comment "Cleanup registry"
	Registry_uninstall /64Bit
	Registry_uninstall_AllProfiles /AllNTUserDats
endif
 
comment "Delete program shortcuts"
LinkFolder_uninstall
 
[Winbatch_uninstall_32]
"$UninstallProgram32$" /VERYSILENT /NORESTART
 
;[Winbatch_uninstall_msi_32]
;msiexec /x $MsiId32$ /qb! REBOOT=ReallySuppress
 
[Files_uninstall_32]
; Example for recursively deleting the installation directory (don't forget the trailing backslash):
;
; delete -sf "$InstallDir32$\"
 
[Winbatch_uninstall_64]
"$UninstallProgram64$" /VERYSILENT /NORESTART
 
;[Winbatch_uninstall_msi_64]
;msiexec /x $MsiId64$ /qb! REBOOT=ReallySuppress
 
[Files_uninstall_64]
; Example for recursively deleting the installation directory (don't forget the trailing backslash):
;
; delete -sf "$InstallDir64$\"
 
[Registry_uninstall]
; Example of deleting a registry key:
;
; deletekey [HKEY_LOCAL_MACHINE\Software\$ProductId$]
 
[Registry_uninstall_AllProfiles]
 
 
[LinkFolder_uninstall]
; Example of deleting a folder from AllUsers startmenu:
;
; set_basefolder common_programs
; delete_subfolder $ProductId$
;
; Example of deleting a shortcut from AllUsers desktop:
;
; set_basefolder common_desktopdirectory
; set_subfolder ""
; delete_element $ProductId$
 
[Sub_check_exitcode]
comment "Test for installation success via exit code"
set $ExitCode$ = getLastExitCode
; informations to exit codes see
; http://msdn.microsoft.com/en-us/library/aa372835(VS.85).aspx
; http://msdn.microsoft.com/en-us/library/aa368542.aspx
if ($ExitCode$ = "0")
	comment "Looks good: setup program gives exitcode zero"
else
	comment "Setup program gives a exitcode unequal zero: " + $ExitCode$
	if ($ExitCode$ = "1605")
		comment "ERROR_UNKNOWN_PRODUCT	1605	This action is only valid for products that are currently installed."
		comment "Uninstall of a not installed product failed - no problem"
	else
		if ($ExitCode$ = "1641")
			comment "looks good: setup program gives exitcode 1641"
			comment "ERROR_SUCCESS_REBOOT_INITIATED	1641	The installer has initiated a restart. This message is indicative of a success."
		else
			if ($ExitCode$ = "3010")
				comment "looks good: setup program gives exitcode 3010"
				comment "ERROR_SUCCESS_REBOOT_REQUIRED	3010	A restart is required to complete the install. This message is indicative of a success."
			else
				logError "Fatal: Setup program gives an unknown exitcode unequal zero: " + $ExitCode$
				isFatalError
			endif
		endif
	endif
endif
 
[Sub_searchApp32]
set $appKey$ = "[HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\" + "$app$" + "] " + $appKeyString$
Set $testName$ = GetRegistryStringValue32($appKey$)
if contains($testName$,$appString$)
;	set $appKey$ = "[HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\" + "$app$" + "] UninstallString"
;	Set $testName$ = GetRegistryStringValue32($appKey$)
	;if contains(lower($testName$),lower("MsiExec.exe"))
	set $UninstallCommandList$ = $UninstallCommandList$ + "MsiExec.exe /x " + "$app$" + " /qb-! REBOOT=ReallySuppress::"
	;else
	;	Set $testName$ = unquote($testName$,'"')
	;	Set $testName$ = unquote($testName$,"'")
	;	Set $exeString$ = takeString(0, splitString ($testName$, "exe"))
	;	set $UninstallCommandList$ = $UninstallCommandList$ + $exeString$ + "exe /S::"
	;endif
endif
 
[Sub_searchApp64]
set $appKey$ = "[HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\" + "$app$" + "] " + $appKeyString$
Set $testName$ = GetRegistryStringValue64($appKey$)
if contains($testName$,$appString$)
;	set $appKey$ = "[HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\" + "$app$" + "] UninstallString"
;	Set $testName$ = GetRegistryStringValue64($appKey$)
	;if contains(lower($testName$),lower("MsiExec.exe"))
	set $UninstallCommandList$ = $UninstallCommandList$ + "MsiExec.exe /x " + "$app$" + " /qb-! REBOOT=ReallySuppress::"
	;else
	;	Set $testName$ = unquote($testName$,'"')
	;	Set $testName$ = unquote($testName$,"'")
	;	Set $exeString$ = takeString(0, splitString ($testName$, "exe"))
	;	set $UninstallCommandList$ = $UninstallCommandList$ + '"' + $exeString$ + 'exe /S"::'
	;endif
endif

QR Code
QR Code userspace:gimp_2.8.10 (generated for current page)