F-Secure Client 9.32 Via Management

Scripts and guide by Soren Birk

This is F-Secure-client which is used together with a server management-console.

Tested With:

  • OPSI 4.0.2.4
  • Winst 4.11.3.3
  • Windows 7, 32 and 64-Bit

Start by setting up the server-side and exporting your preferences to the client install-file (rename and move to CLIENT_DATA).

I have commented the check exitcode sub-sections, as they were giving me an error because of the pending restart.

The PC will reboot when the package has been uninstalled/installed. Give the client time to contact the server for the config when installed.

Tree:

CLIENT_DATA
  ├ fsecureclient.msi
  ├ fsecurelogo.png
  ├ setup32.ins
  ├ uninstall32.ins
  └ delsub32.ins

Setup32.ins

; Author Soren Birk
 
[Actions]
requiredWinstVersion >= "4.11.2.6"
 
DefVar $MsiId$
DefVar $LogDir$
DefVar $ProductId$  
DefVar $MinimumSpace$
DefVar $InstallDir$
DefVar $ExitCode$
DefVar $LicenseRequired$
DefVar $LicenseKey$
DefVar $LicensePool$
DefVar $RebootFlag$
DefVar $WinstRegKey$
 
Set $LogDir$ = "%SystemDrive%\tmp"
 
Set $WinstRegKey$ = "HKLM\SOFTWARE\opsi.org\winst"
Set $RebootFlag$ = GetRegistryStringValue("["+$WinstRegKey$+"] "+"RebootFlag")
 
; ----------------------------------------------------------------
; - Please edit the following values                             -
; ----------------------------------------------------------------
Set $ProductId$       = "fsecureclient"
Set $MinimumSpace$    = "1 GB"
Set $InstallDir$ = "%ProgramFiles32Dir%\F-Secure"
Set $LicenseRequired$ = "false"
Set $LicensePool$     = "p_" + $ProductId$
; ----------------------------------------------------------------
 
if not(HasMinimumSpace ("%SystemDrive%", $MinimumSpace$))
	LogError "Not enough space on %SystemDrive%, " + $MinimumSpace$ + " on drive %SystemDrive% needed for " + $ProductId$
	isFatalError "Not enough free space"
else
	comment "Display product logo"
	ShowBitmap "%ScriptPath%\fsecurelogo.png" $ProductId$
 
	if not (($RebootFlag$ = "1") or ($RebootFlag$ = "2"))
 
		comment "Rebootflag is set to 1, indicating that this section has been activated"
		Set $RebootFlag$ = "1"
		Registry_SaveRebootFlag /32Bit
 
		if FileExists("%ScriptPath%\delsub32.ins")
			comment "Start uninstall sub section"
			Sub "%ScriptPath%\delsub32.ins"
		endif
	endif
 
	if ($RebootFlag$ = "1")
		Message "Installing " + $ProductId$ + " ..."
 
		if $LicenseRequired$ = "true"
			comment "Licensing required, reserve license and get license key"
			Sub_get_licensekey
		endif
 
		comment "Start setup-program"
		ChangeDirectory "%SCRIPTPATH%"
		Winbatch_install /WaitForProcessEnding "fssetup.exe"
		; Sub_check_exitcode
 
		comment "Rebootflag is set to 2, indicating that the product has been installed"
		Set $RebootFlag$ = "2"
		Registry_SaveRebootFlag /32Bit
 
		Message "Rebooting"
		ExitWindows /ImmediateReboot
 
	else
		comment "Rebootflag is reset"
		Set $RebootFlag$ = "0"
		Registry_SaveRebootFlag /32Bit
	endif
 
 
endif
 
[Winbatch_install]
msiexec /i "%ScriptPath%\fsecureclient.msi" /l* "$LogDir$\$ProductId$.install_log.txt" /qb! ALLUSERS=1 REBOOT=ReallySuppress
 
 
[Registry_SaveRebootFlag]
openKey [$WinstRegKey$]
set "RebootFlag" = "$RebootFlag$"
 
 
[Sub_get_licensekey]
if opsiLicenseManagementEnabled
	comment "License management is enabled and will be used"
 
	comment "Trying to get a license key"
	Set $LicenseKey$ = demandLicenseKey ($LicensePool$)
	; If there is an assignment of exactly one licensepool to the product the following call is possible:
	; Set $LicenseKey$ = demandLicenseKey ("", $ProductId$)
	;
	; If there is an assignment of a license pool to a windows software id, it is possible to use:
	; DefVar $WindowsSoftwareId$
	; $WindowsSoftwareId$ = "..."
	; Set $LicenseKey$ = demandLicenseKey ("", "", $WindowsSoftwareId$)
 
	DefVar $ServiceErrorClass$
	set $ServiceErrorClass$ = getLastServiceErrorClass
	comment "Error class: " + $ServiceErrorClass$
 
	if $ServiceErrorClass$ = "None"
		comment "Everything fine, we got the license key '" + $LicenseKey$ + "'"
	else
		if $ServiceErrorClass$ = "LicenseConfigurationError"
			LogError "Fatal: license configuration must be corrected"
			LogError getLastServiceErrorMessage
			isFatalError
		else 
			if $ServiceErrorClass$ = "LicenseMissingError"
				LogError "Fatal: required license is not supplied"
				isFatalError
			endif
		endif
	endif
else
	LogError "Fatal: license required, but license management not enabled"
	isFatalError
endif
 
 
[Sub_check_exitcode]
comment "Test for installation success via exit code"
set $ExitCode$ = getLastExitCode
; informations to exit codes see
; http://msdn.microsoft.com/en-us/library/aa372835(VS.85).aspx
; http://msdn.microsoft.com/en-us/library/aa368542.aspx
if ($ExitCode$ = "0")
	comment "Looks good: setup program gives exitcode zero"
else
	comment "Setup program gives a exitcode unequal zero: " + $ExitCode$
	if ($ExitCode$ = "1605")
		comment "ERROR_UNKNOWN_PRODUCT	1605	This action is only valid for products that are currently installed."
		comment "Uninstall of a not installed product failed - no problem"
	else
		if ($ExitCode$ = "1641")
			comment "looks good: setup program gives exitcode 1641"
			comment "ERROR_SUCCESS_REBOOT_INITIATED	1641	The installer has initiated a restart. This message is indicative of a success."
		else
			if ($ExitCode$ = "3010")
				comment "looks good: setup program gives exitcode 3010"
				comment "ERROR_SUCCESS_REBOOT_REQUIRED	3010	A restart is required to complete the install. This message is indicative of a success."
			else
				logError "Fatal: Setup program gives an unknown exitcode unequal zero: " + $ExitCode$
				isFatalError
			endif
		endif
	endif
endif

Uninstall32.ins

; Author Soren Birk
 
[Actions]
requiredWinstVersion >= "4.11.2.6"
 
DefVar $MsiId$
DefVar $LogDir$
DefVar $ExitCode$
DefVar $ProductId$
DefVar $InstallDir$
DefVar $LicenseRequired$
DefVar $LicensePool$
DefVar $RebootFlag$
DefVar $WinstRegKey$
 
Set $LogDir$ = "%SystemDrive%\tmp"
 
Set $WinstRegKey$ = "HKLM\SOFTWARE\opsi.org\winst"
Set $RebootFlag$ = GetRegistryStringValue("["+$WinstRegKey$+"] "+"RebootFlag")
 
; ----------------------------------------------------------------
; - Please edit the following values                             -
; ----------------------------------------------------------------
Set $ProductId$       = "fsecureclient"
Set $InstallDir$      = "%ProgramFiles32Dir%\F-secure"
Set $LicenseRequired$ = "false"
Set $LicensePool$     = "p_" + $ProductId$
; ----------------------------------------------------------------
 
comment "Display product logo"
ShowBitmap "%ScriptPath%\fsecurelogo.png" $ProductId$
 
Message "Uninstalling " + $ProductId$ + " ..."
if not ($RebootFlag$ = "1")
 
	comment "Rebootflag is set to 1, indicating that this section has been activated"
	Set $RebootFlag$ = "1"
	Registry_SaveRebootFlag /32Bit
 
	if FileExists("%ScriptPath%\delsub32.ins")
		comment "Start uninstall sub section"
		Sub "%ScriptPath%\delsub32.ins"
	endif
 
	if $LicenseRequired$ = "true"
		comment "Licensing required, free license used"
		Sub_free_license
	endif
else
	comment "Rebootflag is reset"
	Set $RebootFlag$ = "0"
	Registry_SaveRebootFlag /32Bit
endif
 
 
[Registry_SaveRebootFlag]
openKey [$WinstRegKey$]
set "RebootFlag" = "$RebootFlag$"
 
 
[Sub_free_license]
comment "License management is enabled and will be used"
 
comment "Trying to free license used for the product"
DefVar $result$
Set $result$ = FreeLicense($LicensePool$)
; If there is an assignment of a license pool to the product, it is possible to use
; Set $result$ = FreeLicense("", $ProductId$)
;
; If there is an assignment of a license pool to a windows software id, it is possible to use
; DefVar $WindowsSoftwareId$
; $WindowsSoftwareId$ = "..."
; set $result$ = FreeLicense("", "", $WindowsSoftwareId$)

Delsub32.ins

; Author Soren Birk
 
Set $MsiId$ = '{XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX}'
 
Message "Uninstalling " + $ProductId$ + " ..."
 
if not (GetRegistryStringValue32("[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\" + $MsiId$ + "] DisplayName") = "")
	comment "MSI id " + $MsiId$ + " found in registry, starting msiexec to uninstall"
	Winbatch_uninstall_msi
	; sub_check_exitcode
 
	comment "Deleting files"
	Files_uninstall
 
	Message "Rebooting"
	ExitWindows /ImmediateReboot
endif
 
 
[Winbatch_uninstall_msi]
msiexec /x $MsiId$ /qb! REBOOT=ReallySuppress
 
 
[Files_uninstall]
del -sf "$InstallDir$\"
 
 
[Sub_check_exitcode]
comment "Test for installation success via exit code"
set $ExitCode$ = getLastExitCode
; informations to exit codes see
; http://msdn.microsoft.com/en-us/library/aa372835(VS.85).aspx
; http://msdn.microsoft.com/en-us/library/aa368542.aspx
if ($ExitCode$ = "0")
	comment "Looks good: setup program gives exitcode zero"
else
	comment "Setup program gives a exitcode unequal zero: " + $ExitCode$
	if ($ExitCode$ = "1605")
		comment "ERROR_UNKNOWN_PRODUCT	1605	This action is only valid for products that are currently installed."
		comment "Uninstall of a not installed product failed - no problem"
	else
		if ($ExitCode$ = "1641")
			comment "looks good: setup program gives exitcode 1641"
			comment "ERROR_SUCCESS_REBOOT_INITIATED	1641	The installer has initiated a restart. This message is indicative of a success."
		else
			if ($ExitCode$ = "3010")
				comment "looks good: setup program gives exitcode 3010"
				comment "ERROR_SUCCESS_REBOOT_REQUIRED	3010	A restart is required to complete the install. This message is indicative of a success."
			else
				logError "Fatal: Setup program gives an unknown exitcode unequal zero: " + $ExitCode$
				isFatalError
			endif
		endif
	endif
endif

QR Code
QR Code userspace:fsecureclientmanagement (generated for current page)