This is an old revision of the document!


Dynamics Navision 2009 Client Classic

Versions
By Matteo Cristofaro 2012/10/27 21:33

Tested with opsi 4.0.1.36
requiredWinstVersion >= 4.10.8.6 By Matteo Cristofaro 2012/10/27 21:33

Das Setup-File wird im ScriptPath in einem Unterverzeichnis “setup” abgelegt, also “CLIENT_DATA\setup\CsideClient\…”

Das Verzeichnis CsideClient enthält die Install-Dateien des Classic-Clients und ist auf der DVD zu finden.

Tree:

├ navision-2009-classicclient.png
├ setup
│   ├CsideClient
│   └ setup.ins
├ uninstall.ins\\
└ delsub.ins\\

setup.ins

[Actions]
DefVar $LogDir$
Set $LogDir$ = "%SystemDrive%\tmp"
DefVar $ProductId$
DefVar $MinimumSpace$
DefVar $InstallDir$
DefVar $ExitCode$
DefVar $LicenseRequired$
DefVar $LicenseKey$
DefVar $LicensePool$
 
; ----------------------------------------------------------------
; - Please edit the following values                             -
; ----------------------------------------------------------------
Set $ProductId$       	= "navision-2009-classicclient"
Set $MinimumSpace$    	= "200 MB"
Set $InstallDir$      	= "%ProgramFilesDir%\Microsoft Dynamics NAV"
Set $LicenseRequired$ 	= "false"
Set $LicensePool$     	= "p_" + $ProductId$
; ----------------------------------------------------------------
 
if not(HasMinimumSpace ("%SystemDrive%", $MinimumSpace$))
	LogError "Not enough space on %SystemDrive%, " + $MinimumSpace$ + " on drive %SystemDrive% needed for " + $ProductId$
	isFatalError
	; Stop process and set installation status to failed
else
	comment "Show product picture"
	ShowBitmap "%ScriptPath%\" + $ProductId$ + ".png" $ProductId$
 
	if FileExists("%ScriptPath%\delsub.ins")
		comment "Start uninstall sub section"
		Sub "%ScriptPath%\delsub.ins"
	endif
 
	Message "Installing " + $ProductId$ + " ..."
 
	if not ($LicenseRequired$ = "false")
		comment "Licensing required, reserve license and get license key"
		Sub_get_licensekey
	endif
 
	comment "Start setup program"
	Winbatch_install
	Sub_check_exitcode
endif
 
 
 
[Winbatch_install]
msiexec /i "%ScriptPath%\setup\CsideClient\Microsoft Dynamics NAV Classic.msi" /l* "$LogDir$\$ProductId$.install_log.txt" /qb! ALLUSERS=2 REBOOT=ReallySuppress
 
 
 
[Sub_get_licensekey]
if opsiLicenseManagementEnabled
	comment "License management is enabled and will be used"
 
	comment "Trying to get a license key"
	Set $LicenseKey$ = demandLicenseKey ($LicensePool$)
	; If there is an assignment of exactly one licensepool to the product the following call is possible:
	; Set $LicenseKey$ = demandLicenseKey ("", $ProductId$)
	;
	; If there is an assignment of a license pool to a windows software id, it is possible to use:
	; DefVar $WindowsSoftwareId$
	; $WindowsSoftwareId$ = "..."
	; Set $LicenseKey$ = demandLicenseKey ("", "", $WindowsSoftwareId$)
 
	DefVar $ServiceErrorClass$
	set $ServiceErrorClass$ = getLastServiceErrorClass
	comment "Error class: " + $ServiceErrorClass$
 
	if $ServiceErrorClass$ = "None"
		comment "Everything fine, we got the license key '" + $LicenseKey$ + "'"
	else
		if $ServiceErrorClass$ = "LicenseConfigurationError"
			LogError "Fatal: license configuration must be corrected"
			LogError getLastServiceErrorMessage
			ExitWindows /Reboot
			isFatalError
		else 
			if $ServiceErrorClass$ = "LicenseMissingError"
				LogError "Fatal: required license is not supplied"
				ExitWindows /Reboot
				isFatalError
			endif
		endif
	endif
else
	LogError "Fatal: license required, but license management not enabled"
	isFatalError
endif
 
 
[Sub_check_exitcode]
comment "Test for installation success via exit code"
set $ExitCode$ = getLastExitCode
; informations to exit codes see
; http://msdn.microsoft.com/en-us/library/aa372835(VS.85).aspx
; http://msdn.microsoft.com/en-us/library/aa368542.aspx
if ($ExitCode$ = "0")
	comment "Looks good: setup program gives exitcode zero"
else
	comment "Setup program gives a exitcode unequal zero: " + $ExitCode$
	if ($ExitCode$ = "1605")
		comment "ERROR_UNKNOWN_PRODUCT	1605	This action is only valid for products that are currently installed."
		comment "Uninstall of a not installed product failed - no problem"
	else
		if ($ExitCode$ = "1641")
			comment "looks good: setup program gives exitcode 1641"
			comment "ERROR_SUCCESS_REBOOT_INITIATED	1641	The installer has initiated a restart. This message is indicative of a success."
		else
			if ($ExitCode$ = "3010")
				comment "looks good: setup program gives exitcode 3010"
				comment "ERROR_SUCCESS_REBOOT_REQUIRED	3010	A restart is required to complete the install. This message is indicative of a success."
			else
				logError "Fatal: Setup program gives an unknown exitcode unequal zero: " + $ExitCode$
				isFatalError
			endif
		endif
	endif
endif

delsub.ins

DefVar $MsiId$
Set $MsiId$ = '{00000000-0000-6002-0000-0000836BD2D2}'
 
Message "Uninstalling " + $ProductId$ + " ..."
 
if not (GetRegistryStringValue("[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\" + $MsiId$ + "] DisplayName") = "")
	comment "MSI id " + $MsiId$ + " found in registry, starting msiexec to uninstall"
	Winbatch_uninstall_msi
	sub_check_exitcode
endif
 
comment "Delete files"
Files_uninstall
 
 
 
[Winbatch_uninstall_msi]
msiexec /x $MsiId$ /qb! REBOOT=ReallySuppress
 
 
 
[Files_uninstall]
delete -sf "$InstallDir$\"
 
 
 
[Sub_check_exitcode]
comment "Test for installation success via exit code"
set $ExitCode$ = getLastExitCode
; informations to exit codes see
; http://msdn.microsoft.com/en-us/library/aa372835(VS.85).aspx
; http://msdn.microsoft.com/en-us/library/aa368542.aspx
if ($ExitCode$ = "0")
	comment "Looks good: setup program gives exitcode zero"
else
	comment "Setup program gives a exitcode unequal zero: " + $ExitCode$
	if ($ExitCode$ = "1605")
		comment "ERROR_UNKNOWN_PRODUCT	1605	This action is only valid for products that are currently installed."
		comment "Uninstall of a not installed product failed - no problem"
	else
		if ($ExitCode$ = "1641")
			comment "looks good: setup program gives exitcode 1641"
			comment "ERROR_SUCCESS_REBOOT_INITIATED	1641	The installer has initiated a restart. This message is indicative of a success."
		else
			if ($ExitCode$ = "3010")
				comment "looks good: setup program gives exitcode 3010"
				comment "ERROR_SUCCESS_REBOOT_REQUIRED	3010	A restart is required to complete the install. This message is indicative of a success."
			else
				logError "Fatal: Setup program gives an unknown exitcode unequal zero: " + $ExitCode$
				isFatalError
			endif
		endif
	endif
endif

uninstall.ins

[Initial]
requiredWinstVersion >= "4.8.6"
LogLevel=2				; Log Errors in Logfile but don't abort:
ExitOnError=false		; Show syntax errors in the script:
ScriptErrorMessages=on	; Dont trace step by step through the script:
TraceMode=off			; Let started programs run in front of the winst window
StayOnTop=false
 
[Aktionen]
DefVar $TEMP$
Set $TEMP$ = EnvVar("TEMP")
DefVar $LogDir$
Set $LogDir$ = "%SystemDrive%\tmp"
DefVar $ExitCode$
DefVar $ProductId$
DefVar $InstallDir$
DefVar $LicenseRequired$
DefVar $LicensePool$
 
; ----------------------------------------------------------------
; - Please edit the following values                             -
; ----------------------------------------------------------------
Set $ProductId$       = "navision-2009-classicclient"
Set $InstallDir$      = "%ProgramFilesDir%\Microsoft Dynamics NAV"
Set $LicenseRequired$ = "false"
Set $LicensePool$     = "p_" + $ProductId$
; ----------------------------------------------------------------
 
comment "Show product picture"
ShowBitmap /3 "%ScriptPath%\" + $ProductId$ + ".png" $ProductId$
 
Message "Uninstalling " + $ProductId$ + " ..."
 
if FileExists("%ScriptPath%\delsub.ins")
	comment "Start uninstall sub section"
	Sub "%ScriptPath%\delsub.ins"
endif
 
if not ($LicenseRequired$ = "false")
	comment "Licensing required, free license used"
	Sub_free_license
endif
 
[Sub_free_license]
if opsiLicenseManagementEnabled
	comment "License management is enabled and will be used"
 
	comment "Trying to free license used for the product"
	DefVar $result$
	Set $result$ = FreeLicense($LicensePool$)
	; If there is an assignment of a license pool to the product, it is possible to use
	; Set $result$ = FreeLicense("", $ProductId$)
	;
	; If there is an assignment of a license pool to a windows software id, it is possible to use
	; DefVar $WindowsSoftwareId$
	; $WindowsSoftwareId$ = "..."
	; set $result$ = FreeLicense("", "", $WindowsSoftwareId$)
else
	LogError "Error: licensing required, but license management not enabled"
	isFatalError
endif

QR Code
QR Code userspace:dynamics_navision_2009_client (generated for current page)