Baywotch

Tested with opsi 4.0.1
requiredWinstVersion >= 4.8.6
questions to: Thomas_H 2011/10/27 10:44
The installation-files can be downloaded from: http://www.baywotch.de/php/download.php//

Please note: This script is a lil bit older, made unter Opsi 3.5 It also functions with the new Opsi 4.0 but is not as well structured like it should.

Last checks: Thomas_H 2019/05/14 11:36

Tree:
├ baywotch.bmp
├ bw4setup.exe
├ delsub.ins
├ setup.ins
└ uninstall.ins

setup.ins

[Initial]
requiredWinstVersion >= "4.8.6"
LogLevel=2
;  Log Errors in Logfile but don't abort:
ExitOnError=false
; Show syntax errors in the script:
ScriptErrorMessages=on
; Dont trace step by step through the script:
TraceMode=off
; let started programs run in front of the winst window
StayOnTop=false
 
[Aktionen]
DefVar $TEMP$
DefVar $ProductId$
DefVar $MinimumSpace$
DefVar $NewExe$
DefVar $InstallDir$
DefVar $ExitCode$
DefVar $LicenseRequired$
DefVar $LicenseKey$
DefVar $LicensePool$
 
comment "show product picture"
ShowBitmap /3
if FileExists ("%scriptpath%\"+"baywotch.bmp")
    ShowBitmap /3 "%scriptpath%\"+"baywotch.bmp" $ProductId$
endif
 
 
; This should be edited
set $ProductId$ = "baywotch"
set $MinimumSpace$ = "100 MB"
set $InstallDir$="%ProgramFilesDir%\BayWotch4\"
set $NewExe$=$InstallDir$+"\baywotch.exe"
set $LicenseRequired$ = "false"
set $LicensePool$ = "p_" + $ProductId$
 
 
Set $TEMP$ = EnvVar("TEMP")
 
; Message at install time:
Message "Installing "+$ProductId$+" ..."
 
; Message at install time:
Message "Installing "+$ProductId$+" ..."
 
if not(HasMinimumSpace ("%SYSTEMDRIVE%", $MinimumSpace$))
        LogError "Not enough space on %SYSTEMDRIVE%: . "+$MinimumSpace$+" on Drive %SYSTEMDRIVE%: needed for "+$ProductId$+"."
        isFatalError
        ; stop process and set installation status to failed
else
 
        if FileExists("%ScriptPath%\delsub.ins")
                comment  "start uninstall sub section"
                sub "%ScriptPath%\delsub.ins"
        endif
 
        ;Message at install time:
        Message "Installing "+$ProductId$+" ..."
 
        comment "if license management enabled, reserve license and get license key"
        if ($LicenseRequired$ = "true")
                sub_get_licensekey
        endif
 
        comment "start setup program"
        Winbatch_install
        sub_check_exitcode
 
        comment "test for installation success"
        if not(FileExists($NewExe$))
                logError "Fatal: After Installation "+$NewExe$+" not found"
                isFatalError
        endif
 
endif
 
[Winbatch_install]
"%SCRIPTPATH%\bw4setup.exe" /sp- /silent /norestart
; $licensekey$ may be inserted into the additional parameters string
 
[sub_get_licensekey]
if opsiLicenseManagementEnabled
        comment "license management is enabled and will be used"
 
        comment "try to to get license key"
        Set $licensekey$ = demandLicenseKey ($licensepool$)
        ; if there is an assignment of exactly one licensepool to the product the following call is possible:
        ; Set $licensekey$ = demandLicenseKey ("", $ProductId$)
        ; if there is an assignment of a license pool to a windows software id, it is possible to use
        ; DefVar $windowsSoftwareId$
        ; $windowsSoftwareId$ = "..."
        ; Set $licensekey$ = demandLicenseKey ("", "", $windowsSoftwareId$)
 
        DefVar $serviceErrorClass$
        set $serviceErrorClass$ = getLastServiceErrorClass
        comment "error class: " + $serviceErrorClass$
 
        if $serviceErrorClass$ = "None"
                comment "everything fine"
                comment "we got the license key '" + $licensekey$ + "'"
        else
                if $serviceErrorClass$ = "LicenseConfigurationError"
                        LogError "Fatal: license configuration must be corrected"
                        LogError getLastServiceErrorMessage
                        isFatalError
                else
                        if $serviceErrorClass$ = "LicenseMissingError"
                                LogError "Fatal: required license is not supplied"
                                isFatalError
                        endif
                endif
        endif
else
        LogError "Fatal: license required, but license management not enabled"
        isFatalError
endif
 
 
[sub_check_exitcode]
comment "test for installation success via exit code"
set $ExitCode$ = getLastExitCode
; informations to exit codes see
; http://msdn.microsoft.com/en-us/library/aa372835(VS.85).aspx
; http://msdn.microsoft.com/en-us/library/aa368542.aspx
if ($ExitCode$ = "0")
        comment "looks good: setup program gives exitcode zero"
else
        comment "Setup program gives a exitcode unequal zero: "+$ExitCode$
        if ($ExitCode$ = "1605")
                comment "ERROR_UNKNOWN_PRODUCT  1605    This action is only valid for products that are currently installed."
                comment "Uninstall of a not installed product failed - no problem"
        else
                if ($ExitCode$ = "1641")
                        comment "looks good: setup program gives exitcode 1641"
                        comment "ERROR_SUCCESS_REBOOT_INITIATED 1641    The installer has initiated a restart. This message is indicative of a success."
                else
                        if ($ExitCode$ = "3010")
                                comment "looks good: setup program gives exitcode 3010"
                                comment "ERROR_SUCCESS_REBOOT_REQUIRED  3010    A restart is required to complete the install. This message is indicative of a success."
                        else
                                logError "Fatal: Setup program gives an unknown exitcode unequal zero: "+$ExitCode$
                                isFatalError
                        endif
                endif
        endif
endif

uninstall.ins

; copyright (c) uib gmbh (www.uib.de)
; This sourcecode is owned by uib gmbh
; and published under the Terms of the General Public License.
; credits: http://www.opsi.org/credits/
 
[Actions]
requiredWinstVersion >= "4.10.5"
DefVar $MsiId$
;DefVar $UninstallProgram$
DefVar $LogDir$
DefVar $ExitCode$
DefVar $ProductId$
DefVar $InstallDir$
DefVar $LicenseRequired$
DefVar $LicensePool$
Set $LogDir$ = "%SystemDrive%\tmp"
; ----------------------------------------------------------------
; - Please edit the following values                             -
; ----------------------------------------------------------------
Set $ProductId$       = "baywotchlite"
Set $InstallDir$      = "%ProgramFilesDir%\BayWotch4"
Set $LicenseRequired$ = "false"
Set $LicensePool$     = ""
; ----------------------------------------------------------------
comment "Show product picture"
ShowBitmap "%ScriptPath%\" + $ProductId$ + ".bmp" $ProductId$
Message "Uninstalling " + $ProductId$ + " ..."
if FileExists("%ScriptPath%\delsub.ins")
        comment "Start uninstall sub section"
        Sub "%ScriptPath%\delsub.ins"
endif
if $LicenseRequired$ = "true"
        comment "Licensing required, free license used"
        Sub_free_license
endif
 
[Sub_free_license]
if opsiLicenseManagementEnabled
        comment "License management is enabled and will be used"
        comment "Trying to free license used for the product"
        DefVar $result$
        Set $result$ = FreeLicense($LicensePool$)
        ; If there is an assignment of a license pool to
        ; the product, it is possible to use
        ; Set $result$ = FreeLicense("", $ProductId$)
        ;
        ; If there is an assignment of a license pool to
        ; a windows software id, it is possible to use
        ; DefVar $WindowsSoftwareId$
        ; $WindowsSoftwareId$ = "..."
        ; set $result$ = FreeLicense("", "", $WindowsSoftwareId$)
else
        LogError "Error: licensing required, but license management not enabled"
        isFatalError
endif

delsub.ins

DefVar $UninstallProgram$
Set $UninstallProgram$ = "%ProgramFilesDir%\BayWotch4\unins000.exe"
;Set $UninstallProgram$ = "C:\Programme\BayWotch4\unins000.exe"
 
Message "Uninstalling " + $ProductId$ + " ..."
if FileExists($UninstallProgram$)
        comment "Uninstall program found, starting uninstall"
        Winbatch_uninstall
        sub_check_exitcode
endif
; if not (GetRegistryStringValue([HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\" + $MsiId$ + "] DisplayName") = "")
;        comment "MSI id " + $MsiId$ + " found in registry, starting msiexec to uninstall"
;        Winbatch_uninstall_msi
;        sub_check_exitcode
; endif
 
comment "Delete files"
Files_uninstall
comment "Cleanup registry"
Registry_uninstall
comment "Delete program shortcuts"
LinkFolder_uninstall
 
[Winbatch_uninstall]
; Choose one of the following examples as basis for program uninstall
;
; === Nullsoft Scriptable Install System ==================================
; "$UninstallProgram$" /S
;
; === Inno Setup ==========================================================
"$UninstallProgram$" /silent /norestart
 
[Winbatch_uninstall_msi]
;msiexec /x $MsiId$ /qb! REBOOT=ReallySuppress
 
[Files_uninstall]
; Example for recursively deleting the installation directory
; (don't forget the trailing backslash):
;
; delete -sf "$InstallDir$\"
 
[Registry_uninstall]
; Example of deleting a registry key:
;
; deletekey [HKEY_LOCAL_MACHINE\Software\$ProductId$]
 
[LinkFolder_uninstall]
; Example of deleting a folder from AllUsers startmenu:
;
; set_basefolder common_programs
; delete_subfolder $ProductId$
;
; Example of deleting a shortcut from AllUsers desktop:
;
; set_basefolder common_desktopdirectory
; set_subfolder ""
; delete_element $ProductId$
 
[Sub_check_exitcode]
comment "Test for installation success via exit code"
set $ExitCode$ = getLastExitCode
; informations to exit codes see
; http://msdn.microsoft.com/en-us/library/aa372835(VS.85).aspx
; http://msdn.microsoft.com/en-us/library/aa368542.aspx
if ($ExitCode$ = "0")
        comment "Looks good: setup program gives exitcode zero"
else
        comment "Setup program gives a exitcode unequal zero: " + $ExitCode$
        if ($ExitCode$ = "1605")
                comment "ERROR_UNKNOWN_PRODUCT 1605 This action is only valid for products"
                comment "that are currently installed."
                comment "Uninstall of a not installed product failed - no problem"
        else
                if ($ExitCode$ = "1641")
                        comment "looks good: setup program gives exitcode 1641"
                        comment "ERROR_SUCCESS_REBOOT_INITIATED 1641 The installer has initiated a restart. This message is indicative of a success."
                else
                        if ($ExitCode$ = "3010")
                                comment "looks good: setup program gives exitcode 3010"
                                comment "ERROR_SUCCESS_REBOOT_REQUIRED 3010 A restart is required to"
                                comment "complete the install. This message is indicative of a success."
                        else
                                logError "Fatal: Setup program gives an unknown exitcode unequal zero: "
                                logError $ExitCode$
                                isFatalError
                        endif
                endif
        endif
endif

QR Code
QR Code userspace:baywotch (generated for current page)