PXE boot

[emlegend0]

Hallo zusammen

Wenn ich über PXE ein Netboot Produkt installieren will kommt beim Boot die Fehlermeldung

Code: Alles auswählen

PXE-E53: No boot filename received

kann mir da jemand weiterhelfen?

[j.schneider]

Hallo,

was für ein DHCP-Server ist im Einsatz und wie ist der konfiguriert?
Ist die Option 67 gesetzt?

https://docs.opsi.org/opsi-docs-de/4.3/ ... erver.html

Grüße
Jan Schneider

[m.radtke]

Moin,

kommen die TFTP Anfragen am Server an?

Gruß
Mathias

[emlegend0]

Hallo,

was für ein DHCP-Server ist im Einsatz und wie ist der konfiguriert?
Ist die Option 67 gesetzt?

https://docs.opsi.org/opsi-docs-de/4.3/ ... erver.html

Grüße
Jan Schneider

Der DHCP server ist auf dem OPSI server wie in der Anleitung beschrieben mit der Automatischen Konfiguration installiert

[ThomasT]

Kannst du deine /etc/dhcp/dhcpd.conf hier posten? Und um welche MAC Adresse es sich handelt.

[emlegend0]

Code: Alles auswählen

# dhcpd.conf
#
# Sample configuration file for ISC dhcpd
#
# Attention: If /etc/ltsp/dhcpd.conf exists, that will be used as
# configuration file instead of this file.
#

# option definitions common to all supported networks...
option domain-name "example.org";
option domain-name-servers ns1.example.org, ns2.example.org;

default-lease-time 600;
max-lease-time 7200;

# The ddns-updates-style parameter controls whether or not the server will
# attempt to do a DNS update when a lease is confirmed. We default to the
# behavior of the version 2 packages ('none', since DHCP v2 didn't
# have support for DDNS.)
ddns-update-style none;

Das wäre die dhcpd.conf
00:50:56:91:93:8 die MAC Adresse des clients

[ThomasT]

Äh...in deiner dhcpd.conf steht gar nichts sinnvolles drin.
Woher bekommen die Clients dann ihre IP? Der OPSI-Server macht da in meinen Augen auf jedenfall erstmal nichts...
Auf nem laufenden Windows bekommst du das per ipconfig /all raus, da gibt es dann eine Zeile bei deinem aktiven Interface "DHCP-Server "

[emlegend0]

[/code]

[emlegend0]

entschuldigung ich habe nicht das ganze file gesendet :
hier wäre das ganze file

Code: Alles auswählen

# dhcpd.conf
#
# Sample configuration file for ISC dhcpd
#
# Attention: If /etc/ltsp/dhcpd.conf exists, that will be used as
# configuration file instead of this file.
#

# option definitions common to all supported networks...
option domain-name "example.org";
option domain-name-servers ns1.example.org, ns2.example.org;

default-lease-time 600;
max-lease-time 7200;

# The ddns-updates-style parameter controls whether or not the server will
# attempt to do a DNS update when a lease is confirmed. We default to the
# behavior of the version 2 packages ('none', since DHCP v2 didn't
# have support for DDNS.)
ddns-update-style none;

# If this DHCP server is the official DHCP server for the local
# network, the authoritative directive should be uncommented.
#authoritative;

# Use this to send dhcp log messages to a different log file (you also
# have to hack syslog.conf to complete the redirection).
#log-facility local7;

# No service will be given on this subnet, but declaring it helps the
# DHCP server to understand the network topology.

#subnet 10.152.187.0 netmask 255.255.255.0 {
#}

# This is a very basic subnet declaration.

#subnet 10.254.239.0 netmask 255.255.255.224 {
#  range 10.254.239.10 10.254.239.20;
#  option routers rtr-239-0-1.example.org, rtr-239-0-2.example.org;
#}

# This declaration allows BOOTP clients to get dynamic addresses,
# which we don't really recommend.

#subnet 10.254.239.32 netmask 255.255.255.224 {
#  range dynamic-bootp 10.254.239.40 10.254.239.60;
#  option broadcast-address 10.254.239.31;
#  option routers rtr-239-32-1.example.org;
#}

# A slightly different configuration for an internal subnet.
#subnet 10.5.5.0 netmask 255.255.255.224 {
#  range 10.5.5.26 10.5.5.30;
#  option domain-name-servers ns1.internal.example.org;
#  option domain-name "internal.example.org";
#  option subnet-mask 255.255.255.224;
#  option routers 10.5.5.1;
#  option broadcast-address 10.5.5.31;
#  default-lease-time 600;
#  max-lease-time 7200;
#}

# Hosts which require special configuration options can be listed in
# host statements.   If no address is specified, the address will be
# allocated dynamically (if possible), but the host-specific information
# will still come from the host declaration.

#host passacaglia {
#  hardware ethernet 0:0:c0:5d:bd:95;
#  filename "vmunix.passacaglia";
#  server-name "toccata.example.com";
#}

# Fixed IP addresses can also be specified for hosts.   These addresses
# should not also be listed as being available for dynamic assignment.
# Hosts for which fixed IP addresses have been specified can boot using
# BOOTP or DHCP.   Hosts for which no fixed address is specified can only
# be booted with DHCP, unless there is an address range on the subnet
# to which a BOOTP client is connected which has the dynamic-bootp flag
# set.
#host fantasia {
#  hardware ethernet 08:00:07:26:c0:a5;
#  fixed-address fantasia.example.com;
#}

# You can declare a class of clients and then do address allocation
# based on that.   The example below shows a case where all clients
# in a certain class get addresses on the 10.17.224/24 subnet, and all
# other clients get addresses on the 10.0.29/24 subnet.

#class "foo" {
#  match if substring (option vendor-class-identifier, 0, 4) = "SUNW";
#}

#shared-network 224-29 {
#  subnet 10.17.224.0 netmask 255.255.255.0 {
#    option routers rtr-224.example.org;
#  }
#  subnet 10.0.29.0 netmask 255.255.255.0 {
#    option routers rtr-29.example.org;
#  }
#  pool {
#    allow members of "foo";
#    range 10.17.224.10 10.17.224.250;
#  }
#  pool {
#    deny members of "foo";
#    range 10.0.29.10 10.0.29.230;
#  }
#}
use-host-decl-names on;
subnet 192.168.120.0 netmask 255.255.255.0 {
	group {
		next-server 192.168.120.100;
		if substring (option vendor-class-identifier, 19, 1) = "0" {
			filename "opsi/opsi-linux-bootimage/loader/opsi-netboot.bios";
		}
		else if substring (option vendor-class-identifier, 19, 1) = "7" {
			filename "opsi/opsi-linux-bootimage/loader/shimx64.efi.signed";
		}
	}
	host emuvm01 {
		fixed-address emuvm01.labor.local;
		hardware ethernet 00:50:56:91:93:8e;
		next-server 10.11.12.13;
	}
}

und der client hat als dhcp nicht den opsi server hinterlegt

[ThomasT]

hmm, kann es sein, dass du deine /etc/opsi/backends/dhcpd.conf aus diesem Doku Eintrag kopiert hast:
https://docs.opsi.org/opsi-docs-de/4.3/ ... r-autoconf

Wenn ja, kommentier mal bitte die "default Client Parameters" Zeile aus und starte den OPSI-Server neu.