Probleme mit PXE-Boot "win10-x64"
Probleme mit PXE-Boot "win10-x64"
Hallo,
leider mussten wir nach einem Crash und fehlerhaften Voll-Backup unseren OPSI config server neu installieren.
Hierfür habe ich die vorinstallierte VM genommen und die (zum Glück) noch vorhandenen .opsi-Pakete wieder im Depot installiert.
Aktuell habe ich allerdings noch ein Problem mit der Windows10-Installation, welche vorher funktioniert hat.
- Hostname und IP des Server identisch wie vor dem Crash
- DHCP-Option 66 = 150.0.1.59 (OPSI config server)
- DHCP-Option 67 = opsi/opsi-linux-bootimage/loader/shimx64.efi.signed
- Installfiles und Winpe-Ordner wieder gefüllt
- modules Datei mit 2000 UEFI-Clients wurde wieder unter /etc/opsi eingefügt
- Beim Setzen von "setup" wird die Datei /tftpboot/opsi/opsi-linux-bootimage/cfg/01-f8-b1-56-c9-6d-d8 angelegt:
- Inhalt:
set timeout=0
menuentry 'Start netboot installation' {
set gfxpayload=keep
linux (pxe)/opsi/opsi-linux-bootimage/install-x64 initrd=miniroot-x64 video=vesa:ywrap,mtrr vga=791 quiet --no-log console=ttyS0 pckey=7b991e935390a82d0ef1ab552a38e048 hn=70w00033 dn=nes.jopp.com product=win10-x64 macaddress=f8:b1:56:c9:6d:d8 service=https://10s00059.nes.jopp.com:4447/rpc
initrd (pxe)/opsi/opsi-linux-bootimage/miniroot-x64
}
- Beim Starten des Clients über die IPv4-NIC wird folgendes angezeigt:
Station IP address is 150.0.33.39 (stimmt auch mit externen DHCP Server überein)
Server IP address is 150.0.1.59
NBP filname is opsi/opsi-linux-bootimage/loader/shimx64.efi.signed
NBP filesize is 956304 Bytes
Downloading NBP file ...
Succeed to download NBP file.
Fetching Netboot Image
Leider bleibt danach der Bildschirm auf dem Client schwarz und nach einiger Zeit wird im opsi configed nur "pxe boot configuration read ()" angezeigt.
OPSI-Versionen:
ii opsi-linux-bootimage 20240110-1 all opsi bootimage for netboot tasks.
ii opsi-server-full 4.3.1.1-1 all opsi server
ii opsi-tftpd-hpa 5.2.8-78 amd64 HPA's tftp server
ii opsi-utils 4.3.2.4-1 amd64 Utilities for working with opsi
ii opsiconfd 4.3.3.7-1 amd64 opsi configuration service
ii opsipxeconfd 4.3.2.5-1 amd64 opsi pxe configuration service
win10-x64 = 4.2.0.6-2
Installfiles = Windows 10 22H2
Vielen Dank für Eure Hilfe!
leider mussten wir nach einem Crash und fehlerhaften Voll-Backup unseren OPSI config server neu installieren.
Hierfür habe ich die vorinstallierte VM genommen und die (zum Glück) noch vorhandenen .opsi-Pakete wieder im Depot installiert.
Aktuell habe ich allerdings noch ein Problem mit der Windows10-Installation, welche vorher funktioniert hat.
- Hostname und IP des Server identisch wie vor dem Crash
- DHCP-Option 66 = 150.0.1.59 (OPSI config server)
- DHCP-Option 67 = opsi/opsi-linux-bootimage/loader/shimx64.efi.signed
- Installfiles und Winpe-Ordner wieder gefüllt
- modules Datei mit 2000 UEFI-Clients wurde wieder unter /etc/opsi eingefügt
- Beim Setzen von "setup" wird die Datei /tftpboot/opsi/opsi-linux-bootimage/cfg/01-f8-b1-56-c9-6d-d8 angelegt:
- Inhalt:
set timeout=0
menuentry 'Start netboot installation' {
set gfxpayload=keep
linux (pxe)/opsi/opsi-linux-bootimage/install-x64 initrd=miniroot-x64 video=vesa:ywrap,mtrr vga=791 quiet --no-log console=ttyS0 pckey=7b991e935390a82d0ef1ab552a38e048 hn=70w00033 dn=nes.jopp.com product=win10-x64 macaddress=f8:b1:56:c9:6d:d8 service=https://10s00059.nes.jopp.com:4447/rpc
initrd (pxe)/opsi/opsi-linux-bootimage/miniroot-x64
}
- Beim Starten des Clients über die IPv4-NIC wird folgendes angezeigt:
Station IP address is 150.0.33.39 (stimmt auch mit externen DHCP Server überein)
Server IP address is 150.0.1.59
NBP filname is opsi/opsi-linux-bootimage/loader/shimx64.efi.signed
NBP filesize is 956304 Bytes
Downloading NBP file ...
Succeed to download NBP file.
Fetching Netboot Image
Leider bleibt danach der Bildschirm auf dem Client schwarz und nach einiger Zeit wird im opsi configed nur "pxe boot configuration read ()" angezeigt.
OPSI-Versionen:
ii opsi-linux-bootimage 20240110-1 all opsi bootimage for netboot tasks.
ii opsi-server-full 4.3.1.1-1 all opsi server
ii opsi-tftpd-hpa 5.2.8-78 amd64 HPA's tftp server
ii opsi-utils 4.3.2.4-1 amd64 Utilities for working with opsi
ii opsiconfd 4.3.3.7-1 amd64 opsi configuration service
ii opsipxeconfd 4.3.2.5-1 amd64 opsi pxe configuration service
win10-x64 = 4.2.0.6-2
Installfiles = Windows 10 22H2
Vielen Dank für Eure Hilfe!
Re: Probleme mit PXE-Boot "win10-x64"
Hi
was steht denn im syslog unter /var/log/ ?
Da müsste stehen was an TFTP Anfragen ankommt
Gruß
Mathias
was steht denn im syslog unter /var/log/ ?
Da müsste stehen was an TFTP Anfragen ankommt
Gruß
Mathias
Kein Support per DM!
_________________________
opsi support - http://www.uib.de/
For productive opsi installations we recommend support contracts.
_________________________
opsi support - http://www.uib.de/
For productive opsi installations we recommend support contracts.
Re: Probleme mit PXE-Boot "win10-x64"
Folgendes steht im /var/log/syslog für den Client:
Jan 24 11:55:47 10s00059 in.tftpd[28804]: RRQ from 150.0.33.39 filename opsi/opsi-linux-bootimage/loader/shimx64.efi.signed
Jan 24 11:55:47 10s00059 in.tftpd[28804]: tftp: client does not accept options
Jan 24 11:55:47 10s00059 in.tftpd[28805]: RRQ from 150.0.33.39 filename opsi/opsi-linux-bootimage/loader/shimx64.efi.signed
Jan 24 11:55:47 10s00059 in.tftpd[28806]: RRQ from 150.0.33.39 filename opsi/opsi-linux-bootimage/loader/opsi-netboot.efi
Jan 24 11:55:47 10s00059 in.tftpd[28804]: RRQ from 150.0.33.39 filename opsi/opsi-linux-bootimage/loader/shimx64.efi.signed
Jan 24 11:55:47 10s00059 in.tftpd[28804]: tftp: client does not accept options
Jan 24 11:55:47 10s00059 in.tftpd[28805]: RRQ from 150.0.33.39 filename opsi/opsi-linux-bootimage/loader/shimx64.efi.signed
Jan 24 11:55:47 10s00059 in.tftpd[28806]: RRQ from 150.0.33.39 filename opsi/opsi-linux-bootimage/loader/opsi-netboot.efi
Re: Probleme mit PXE-Boot "win10-x64"
Hi
Ist Secureboot auf der Maschine aus?
Falls nein, erstmal ausschalten um SecureBoot als Fehlerquelle auszuschliessen.
Gruß
Mathias
Ist Secureboot auf der Maschine aus?
Falls nein, erstmal ausschalten um SecureBoot als Fehlerquelle auszuschliessen.
Gruß
Mathias
Kein Support per DM!
_________________________
opsi support - http://www.uib.de/
For productive opsi installations we recommend support contracts.
_________________________
opsi support - http://www.uib.de/
For productive opsi installations we recommend support contracts.
Re: Probleme mit PXE-Boot "win10-x64"
Folgende Einstellungen sind im BIOS des Clients aktiv:
- UEFI aktiviert
- Secure Boot deaktiviert
- NIC mit PXE aktiviert
- RAID deaktiviert
- AHCI aktiviert
- UEFI Network Stack aktiviert
- UEFI aktiviert
- Secure Boot deaktiviert
- NIC mit PXE aktiviert
- RAID deaktiviert
- AHCI aktiviert
- UEFI Network Stack aktiviert
Re: Probleme mit PXE-Boot "win10-x64"
Hi
Setz mal bitte testweise die opsi-netboot.efi Datei als UEFI Startdatei ein und teste erneut. Ebenfalls wieder im Syslog mitschauen was an Daten angefragt und gesendet wird
Gruß
Mathias
Setz mal bitte testweise die opsi-netboot.efi Datei als UEFI Startdatei ein und teste erneut. Ebenfalls wieder im Syslog mitschauen was an Daten angefragt und gesendet wird
Gruß
Mathias
Kein Support per DM!
_________________________
opsi support - http://www.uib.de/
For productive opsi installations we recommend support contracts.
_________________________
opsi support - http://www.uib.de/
For productive opsi installations we recommend support contracts.
Re: Probleme mit PXE-Boot "win10-x64"
Leider gleiche Fehlermeldung:
Jan 24 13:07:33 10s00059 in.tftpd[29445]: RRQ from 150.0.33.39 filename opsi/opsi-linux-bootimage/loader/opsi-netboot.efi
Jan 24 13:07:33 10s00059 in.tftpd[29445]: tftp: client does not accept options
Jan 24 13:07:33 10s00059 in.tftpd[29446]: RRQ from 150.0.33.39 filename opsi/opsi-linux-bootimage/loader/opsi-netboot.efi
Jan 24 13:07:33 10s00059 in.tftpd[29445]: RRQ from 150.0.33.39 filename opsi/opsi-linux-bootimage/loader/opsi-netboot.efi
Jan 24 13:07:33 10s00059 in.tftpd[29445]: tftp: client does not accept options
Jan 24 13:07:33 10s00059 in.tftpd[29446]: RRQ from 150.0.33.39 filename opsi/opsi-linux-bootimage/loader/opsi-netboot.efi
Re: Probleme mit PXE-Boot "win10-x64"
Hi
ok, ich glaube ich weiß was es ist.
Zur Sicherheit, wie lautet die md5summe deiner opsi-netboot.efi Datei?
ok, ich glaube ich weiß was es ist.
Zur Sicherheit, wie lautet die md5summe deiner opsi-netboot.efi Datei?
Kein Support per DM!
_________________________
opsi support - http://www.uib.de/
For productive opsi installations we recommend support contracts.
_________________________
opsi support - http://www.uib.de/
For productive opsi installations we recommend support contracts.
Re: Probleme mit PXE-Boot "win10-x64"
root@10s00059:/tftpboot/opsi/opsi-linux-bootimage/loader# md5sum opsi-netboot.efi
61c7c043c45273458ba96fc909fb5299 opsi-netboot.efi
61c7c043c45273458ba96fc909fb5299 opsi-netboot.efi
Re: Probleme mit PXE-Boot "win10-x64"
Probiere bitte mal folgende opsi-netboot.efi aus
https://nextcloud.uib.de/s/nn9ipnorbF47k3T
Gruß
Mathias
https://nextcloud.uib.de/s/nn9ipnorbF47k3T
Gruß
Mathias
Kein Support per DM!
_________________________
opsi support - http://www.uib.de/
For productive opsi installations we recommend support contracts.
_________________________
opsi support - http://www.uib.de/
For productive opsi installations we recommend support contracts.