[GELÖST] WAN/VPN Erweiterung einrichten klappt nicht

Benutzeravatar
tobias
Beiträge: 1294
Registriert: 20 Aug 2008, 12:36
Wohnort: Braunschweig
Kontaktdaten:

Re: WAN/VPN Erweiterung einrichten klappt nicht

Beitrag von tobias »

Hast du deine opsiclientd.conf selber gebastelt?

Die sind nicht Standard aus !

welche version des opsiclient-agents hast du ?
Benutzeravatar
D1Ck3n
Beiträge: 191
Registriert: 15 Mär 2013, 11:05

Re: WAN/VPN Erweiterung einrichten klappt nicht

Beitrag von D1Ck3n »

Ich habe das fertige System von meinem Ausbilder übernommen. Ich denke mal, dass er diese Config gebastelt hat.
Gruß
D1Ck3n
Benutzeravatar
tobias
Beiträge: 1294
Registriert: 20 Aug 2008, 12:36
Wohnort: Braunschweig
Kontaktdaten:

Re: WAN/VPN Erweiterung einrichten klappt nicht

Beitrag von tobias »

D1Ck3n hat geschrieben:Ich habe das fertige System von meinem Ausbilder bekommen. Ich denke mal, dass er diese Config gebastelt hat.
Daran wird es auch liegen dass es nicht funktioniert. Du hast also events aktiviert die gar nicht mehr in deiner opsiclientd.conf vorhanden sind.

Lösung:
Versuche die event Konfiguration zu reparieren in dem zu die fehlenden optionen in die opsiclientd.conf einträgst (je nach dem wie viele clients sehr mühsam)
ODER verteile die Fehlenden werte per Host-Parameter (nur möglich wenn du noch den client per on_demand erreichst)
ODER verteile ein neuen opsi-client-agent mit Standard config
Benutzeravatar
D1Ck3n
Beiträge: 191
Registriert: 15 Mär 2013, 11:05

Re: WAN/VPN Erweiterung einrichten klappt nicht

Beitrag von D1Ck3n »

tobias hat geschrieben:
D1Ck3n hat geschrieben:Ich habe das fertige System von meinem Ausbilder bekommen. Ich denke mal, dass er diese Config gebastelt hat.
Daran wird es auch liegen dass es nicht funktioniert. Du hast also events aktiviert die gar nicht mehr in deiner opsiclientd.conf vorhanden sind.

Lösung:
Versuche die event Konfiguration zu reparieren in dem zu die fehlenden optionen in die opsiclientd.conf einträgst (je nach dem wie viele clients sehr mühsam)
ODER verteile die Fehlenden werte per Host-Parameter (nur möglich wenn du noch den client per on_demand erreichst)
ODER verteile ein neuen opsi-client-agent mit Standard config
Welche Optionen fehlen denn? Ich war mir die ganze Zeit nicht sicher wo ich welche Option ergänzen muss damit es klappt. Bzw. wo bekomme ich denn eine Standard config her?
Gruß
D1Ck3n
Benutzeravatar
tobias
Beiträge: 1294
Registriert: 20 Aug 2008, 12:36
Wohnort: Braunschweig
Kontaktdaten:

Re: WAN/VPN Erweiterung einrichten klappt nicht

Beitrag von tobias »

D1Ck3n hat geschrieben:
tobias hat geschrieben:
D1Ck3n hat geschrieben:Ich habe das fertige System von meinem Ausbilder bekommen. Ich denke mal, dass er diese Config gebastelt hat.
Daran wird es auch liegen dass es nicht funktioniert. Du hast also events aktiviert die gar nicht mehr in deiner opsiclientd.conf vorhanden sind.

Lösung:
Versuche die event Konfiguration zu reparieren in dem zu die fehlenden optionen in die opsiclientd.conf einträgst (je nach dem wie viele clients sehr mühsam)
ODER verteile die Fehlenden werte per Host-Parameter (nur möglich wenn du noch den client per on_demand erreichst)
ODER verteile ein neuen opsi-client-agent mit Standard config
Welche Optionen fehlen denn? Ich war mir die ganze Zeit nicht sicher wo ich welche Option ergänzen muss damit es klappt. Bzw. wo bekomme ich denn eine Standard config her?
Die Standardkonfiguration so wie sie von UIB kommt findest du im opsi-client-agent paket (einfach runterladen & entpacken)
Im Handbuch ist auch eine abgedruckt, weis aber nicht wie aktuell die ist.


die Host-parameter sollte immer mit bedacht geändert werden - eine falsche Änderung und alle opsi-client-agents sind evtl. unbrauchbar !
Benutzeravatar
D1Ck3n
Beiträge: 191
Registriert: 15 Mär 2013, 11:05

Re: WAN/VPN Erweiterung einrichten klappt nicht

Beitrag von D1Ck3n »

Code: Alles auswählen

; = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
; =     configuration file for opsiclientd                              =
; = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =


; - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
; -     global settings                                                 -
; - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
[global]

# Location of the log file.
log_file = c:\\tmp\\opsiclientd.log

# Set the log (verbosity) level
# (0 <= log level <= 9)
# 0: nothing, 1: essential, 2: critical, 3: errors, 4: warnings, 5: notices
# 6: infos, 7: debug messages, 8: more debug messages, 9: passwords
log_level = 4

# Client id.
host_id = 

# Opsi host key.
opsi_host_key = 

# On every daemon startup the user login gets blocked
# If the gui starts up and no events are being processed the login gets unblocked
# If no gui startup is noticed after <wait_for_gui_timeout> the login gets unblocked
# Set to 0 to wait forever
wait_for_gui_timeout = 120

# Application to run while blocking login
block_login_notifier = %global.base_dir%\\notifier.exe -s notifier\\block_login.ini

; - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
; -     config service settings                                         -
; - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
[config_service]
# Service url.
# http(s)://<opsi config server address>:<port>/rpc
url = https://opsi.uib.local:4447/rpc

# Conection timeout.
connection_timeout = 30

# The time in seconds after which the user can cancel the connection establishment
user_cancelable_after = 30

; - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
; -     depot server settings                                           -
; - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
[depot_server]

# Depot server id
depot_id =

# Depot url.
# smb://<depot address>/<share name>/<path to products>
url =

# Local depot drive
drive =

# Username that is used for network connection [domain\]<username>
username = pcpatch

; - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
; -     cache service settings                                          -
; - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
[cache_service]
# Maximum product cache size in bytes
product_cache_max_size = 5000000000
backend_manager_config = %global.base_dir%\\opsiclientd\\backendManager.d

; - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
; -     control server settings                                         -
; - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
[control_server]

# The network interfaces to bind to.
# This must be the IP address of an network interface.
# Use 0.0.0.0 to listen to all interfaces
interface = 0.0.0.0

# The port where opsiclientd will listen for HTTPS rpc requests.
port = 4441

# The location of the server certificate.
ssl_server_cert_file = %global.base_dir%\\opsiclientd\\opsiclientd.pem

# The location of the server private key
ssl_server_key_file = %global.base_dir%\\opsiclientd\\opsiclientd.pem

# The location of the static files
static_dir = %global.base_dir%\\opsiclientd\\static_html

; - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
; -     notification server settings                                    -
; - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
[notification_server]

# The network interfaces to bind to.
# This must be the IP address of an network interface.
# Use 0.0.0.0 to listen to all interfaces
interface = 127.0.0.1

# The first port where opsiclientd will listen for notification clients.
start_port = 44000

# Port for popup notification server
popup_port = 45000

; - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
; -     opsiclientd notifier settings                                   -
; - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
[opsiclientd_notifier]

# Notifier application command
command = %global.base_dir%\\notifier.exe -p %port%

; - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
; -     opsiclientd rpc tool settings                                   -
; - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
[opsiclientd_rpc]

# RPC tool command
command = %global.base_dir%\\opsiclientd_rpc.exe "%global.host_id%" "%global.opsi_host_key%" "%control_server.port%"

; - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
; -     action processor settings                                       -
; - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
[action_processor]
# Locations of action processor
local_dir = %global.base_dir%\\opsi-winst
remote_dir = \\install\\opsi-winst\\files\\opsi-winst
filename = winst32.exe
# Action processor command
command = "%action_processor.local_dir%\\%action_processor.filename%" /opsiservice "%service_url%" /clientid %global.host_id% /username %global.host_id% /password %global.opsi_host_key%

; - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
; -     events                                                          -
; - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
[event_daemon_startup]
type = daemon startup
active = false

[event_daemon_shutdown]
type = daemon shutdown
active = false

[event_gui_startup]
type = gui startup
message = Starting to process product actions.
message[de] = Starte die Bearbeitung von Produkt-Aktionen.
user_cancelable = 0
block_login = true
lock_workstation = false
logoff_current_user = false
get_config_from_service = true
update_config_file = true
write_log_to_service = true
update_action_processor = true
cache_products = false
cache_max_bandwidth = 0
sync_config = false
requires_cached_products = false
use_cached_config = false
event_notifier_command = %opsiclientd_notifier.command% -s notifier\\event.ini
event_notifier_desktop = current
action_notifier_command = %opsiclientd_notifier.command% -s notifier\\action.ini
action_notifier_desktop = winlogon
action_processor_command = %action_processor.command%
action_processor_desktop = winlogon
shutdown_notifier_command = %opsiclientd_notifier.command% -s notifier\\shutdown.ini
shutdown_notifier_desktop = current

[event_on_demand]
type = custom
message = Starting to process product actions. You are allowed to cancel this event a total of %user_cancelable% time(s). The event was already canceled %cancel_counter% time(s).
message[de] = Starte die Bearbeitung von Produkt-Aktionen. Sie können diese Aktion insgesamt %user_cancelable% mal abbrechen. Die Aktion wurde bereits %cancel_counter% mal abgebrochen.
user_cancelable = 0
block_login = true
lock_workstation = false
logoff_current_user = false
get_config_from_service = true
update_config_file = true
write_log_to_service = true
update_action_processor = true
cache_products = false
cache_max_bandwidth = 0
sync_config = false
requires_cached_products = false
use_cached_config = false
shutdown_warning_time = 300
shutdown_user_cancelable = 0
shutdown_warning_repetition_time = 3600
shutdown_warning_message = A reboot is required to complete software installation tasks. You are allowed to delay this reboot a total of %shutdown_user_cancelable% time(s). The reboot was already delayed %shutdown_cancel_counter% time(s).
shutdown_warning_message[de] = Ein Neustart wird benötigt um die Software-Installationen abzuschliessen. Sie können diesen Neustart insgesamt %shutdown_user_cancelable% mal verschieben. Der Neustart wurde bereits %shutdown_cancel_counter% mal verschoben.
event_notifier_command = %opsiclientd_notifier.command% -s notifier\\event.ini
event_notifier_desktop = current
action_notifier_command = %opsiclientd_notifier.command% -s notifier\\action.ini
action_notifier_desktop = current
action_processor_command = %action_processor.command%
action_processor_desktop = current
shutdown_notifier_command = %opsiclientd_notifier.command% -s notifier\\shutdown.ini
shutdown_notifier_desktop = current

[event_vpn_startup]
type = custom
active = false
wql = SELECT * FROM __InstanceModificationEvent WITHIN 2 WHERE TargetInstance ISA 'Win32_NetworkAdapter' AND TargetInstance.Name = "TAP-Win32 Adapter V9" AND TargetInstance.NetConnectionStatus = 2
message = Opsi will start software and hardware inventory on this computer. You can continue your work in the meantime.
message[de] = Opsi führt nun eine Software und Hardware-Inventarisierung auf diesem Computer durch. Sie können Ihre Arbeit in der Zwischenzeit fortsetzen.
get_config_from_service = true
update_config_file = true
write_log_to_service = true
warning_time = 20
service_options = { "actionProcessingFilter": { "productIds": ["hwaudit", "swaudit"] } }
cache_products = false
cache_max_bandwidth = 0
event_notifier_command = %opsiclientd_notifier.command% -s notifier\\event.ini
event_notifier_desktop = current
action_notifier_command = %opsiclientd_notifier.command% -s notifier\\action.ini
action_notifier_desktop = current
action_processor_command = %action_processor.command% /service_options "%event_vpn_startup.service_options%"
action_processor_desktop = current

[event_user_login]
type = user login
active = false
message = Starting to process user login actions.
message[de] = Beginne mit der Verarbeitung der Benutzer-Anmeldungs-Aktionen.
user_cancelable = 0
block_login = false
lock_workstation = false
logoff_current_user = false
process_shutdown_requests = false
get_config_from_service = false
update_config_file = false
write_log_to_service = false
update_action_processor = false
notification_delay = 0
cache_products = false
cache_max_bandwidth = 0
sync_config = false
requires_cached_products = false
use_cached_config = false
event_notifier_command = %opsiclientd_notifier.command% -s notifier\\event.ini
event_notifier_desktop = current
action_type = login
action_notifier_command = %opsiclientd_notifier.command% -s notifier\\userlogin.ini
action_notifier_desktop = current
action_processor_command = %action_processor.command% /usercontext %event.user%
action_processor_desktop = current
action_processor_timeout = 300

Ich finde den Download für den Client Agent irgendwie nicht, aber ich habe noch eine alte conf gefunden, ist das die Standard Conf? Bzw. kann ich mit dieser die Erweiterung nutzen?

Gruß
Gruß
D1Ck3n
Benutzeravatar
tobias
Beiträge: 1294
Registriert: 20 Aug 2008, 12:36
Wohnort: Braunschweig
Kontaktdaten:

Re: WAN/VPN Erweiterung einrichten klappt nicht

Beitrag von tobias »

Nöp das ist sie nicht:

Da is der Download ;)
http://download.uib.de/opsi4.0/products/localboot/
Benutzeravatar
D1Ck3n
Beiträge: 191
Registriert: 15 Mär 2013, 11:05

Re: WAN/VPN Erweiterung einrichten klappt nicht

Beitrag von D1Ck3n »

tobias hat geschrieben:Nöp das ist sie nicht:

Da is der Download ;)
http://download.uib.de/opsi4.0/products/localboot/
Danke^^

Aber ist das nicht die gleiche, die ich dir gepostet hatte?

Code: Alles auswählen

; = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
; =     configuration file for opsiclientd                              =
; = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =


; - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
; -     global settings                                                 -
; - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
[global]

# Location of the log file.
log_file = c:\\tmp\\opsiclientd.log

# Set the log (verbosity) level
# (0 <= log level <= 9)
# 0: nothing, 1: essential, 2: critical, 3: errors, 4: warnings, 5: notices
# 6: infos, 7: debug messages, 8: more debug messages, 9: passwords
log_level = 4

# Client id.
host_id = 

# Opsi host key.
opsi_host_key = 

# Verify opsi server certs
verify_server_cert = false

# Verify opsi server certs by ca
verify_server_cert_by_ca = false

# On every daemon startup the user login gets blocked
# If the gui starts up and no events are being processed the login gets unblocked
# If no gui startup is noticed after <wait_for_gui_timeout> the login gets unblocked
# Set to 0 to wait forever
wait_for_gui_timeout = 120

# Application to run while blocking login
block_login_notifier = %global.base_dir%\\notifier.exe -s notifier\\block_login.ini

; - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
; -     config service settings                                         -
; - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
[config_service]
# Service url.
# http(s)://<opsi config server address>:<port>/rpc
url = https://opsi.uib.local:4447/rpc

# Conection timeout.
connection_timeout = 30

# The time in seconds after which the user can cancel the connection establishment
user_cancelable_after = 30

; - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
; -     depot server settings                                           -
; - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
[depot_server]

# Depot server id
depot_id =

# Depot url.
# smb://<depot address>/<share name>/<path to products>
url =

# Local depot drive
drive =

# Username that is used for network connection [domain\]<username>
username = pcpatch

; - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
; -     cache service settings                                          -
; - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
[cache_service]
# Maximum product cache size in bytes
product_cache_max_size = 5000000000

; - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
; -     control server settings                                         -
; - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
[control_server]

# The network interfaces to bind to.
# This must be the IP address of an network interface.
# Use 0.0.0.0 to listen to all interfaces
interface = 0.0.0.0

# The port where opsiclientd will listen for HTTPS rpc requests.
port = 4441

# The location of the server certificate.
ssl_server_cert_file = %global.base_dir%\\opsiclientd\\opsiclientd.pem

# The location of the server private key
ssl_server_key_file = %global.base_dir%\\opsiclientd\\opsiclientd.pem

# The location of the static files
static_dir = %global.base_dir%\\opsiclientd\\static_html

; - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
; -     notification server settings                                    -
; - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
[notification_server]

# The network interfaces to bind to.
# This must be the IP address of an network interface.
# Use 0.0.0.0 to listen to all interfaces
interface = 127.0.0.1

# The first port where opsiclientd will listen for notification clients.
start_port = 44000

# Port for popup notification server
popup_port = 45000

; - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
; -     opsiclientd notifier settings                                   -
; - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
[opsiclientd_notifier]

# Notifier application command
command = %global.base_dir%\\notifier.exe -p %port% -i %id%

; - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
; -     opsiclientd rpc tool settings                                   -
; - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
[opsiclientd_rpc]

# RPC tool command
command = %global.base_dir%\\opsiclientd_rpc.exe "%global.host_id%" "%global.opsi_host_key%" "%control_server.port%"

; - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
; -     action processor settings                                       -
; - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
[action_processor]
# Locations of action processor
local_dir = %global.base_dir%\\opsi-winst
remote_dir = opsi-winst\\files\\opsi-winst
filename = winst32.exe

# Action processor command
command = "%action_processor.local_dir%\\%action_processor.filename%" /opsiservice "%service_url%" /clientid %global.host_id% /username %global.host_id% /password %global.opsi_host_key%

# Load profile / environment of %run_as_user%
create_environment = false

; - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
; -     events                                                          -
; - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
[event_default]
; === Event configuration
# Type of the event (string)
type = template
# Interval for timer events in seconds (int)
interval = -1
# Maximum number of event repetitions after which the event will be deactivated (int, -1 = forever)
max_repetitions = -1
# Time in seconds to wait before event becomes active (int, 0 to disable delay)
activation_delay = 0
# Time in seconds to wait before an event will be fired (int, 0 to disable delay)
notification_delay = 0
# Event notifier command (string)
event_notifier_command = %opsiclientd_notifier.command% -s notifier\\event.ini
# The desktop on which the event notifier will be shown on (current/default/winlogon)
event_notifier_desktop = current
# Block login while event is been executed (bool)
block_login = false
# Lock workstation on event occurrence (bool)
lock_workstation = false
# Logoff the current logged in user on event occurrence (bool)
logoff_current_user = false
# Get config settings from service (bool)
get_config_from_service = true
# Store config settings in config file (bool)
update_config_file = true
# Transmit log file to opsi service after the event processing has finished (bool)
write_log_to_service = true
# Shutdown machine after action processing has finished (bool)
shutdown = false
# Reboot machine after action processing has finished (bool)
reboot = false

; === Sync/cache settings
# Sync configuration from local config cache to server (bool)
sync_config_to_server = false
# Sync configuration from server to local config cache (bool)
sync_config_from_server = false
# Sync configuration from local config cache to server after action processing (bool)
post_sync_config_to_server = false
# Sync configuration from server to local config cache after action processing (bool)
post_sync_config_from_server = false
# Work on local config cache
use_cached_config = false
# Cache products for which actions should be executed in local depot cache (bool)
cache_products = false
# Maximum transfer rate when caching products in byte/s (int, 0 = no limit)
cache_max_bandwidth = 0
# Dynamically adapt bandwith to other network traffic (bool)
cache_dynamic_bandwidth = false
# Work on local depot cache
use_cached_products = false

; === Action notification (if product actions should be processed)
# Time in seconds for how long the action notification is shown (int, 0 to disable)
action_warning_time = 0
# Action notifier command (string)
action_notifier_command = %opsiclientd_notifier.command% -s notifier\\action.ini
# The desktop on which the action notifier will be shown on (current/default/winlogon)
action_notifier_desktop = current
# Message shown in the action notifier window (string)
action_message = Starting to process product actions. You are allowed to cancel this event a total of %action_user_cancelable% time(s). The event was already canceled %state.action_processing_cancel_counter% time(s).
# German translation (string)
action_message[de] = Starte die Bearbeitung von Produkt-Aktionen. Sie können diese Aktion insgesamt %action_user_cancelable% mal abbrechen. Die Aktion wurde bereits %state.action_processing_cancel_counter% mal abgebrochen.
# French translation (string)
action_message[fr] = Traitement des actions du produit. Vous êtes autorisé à annuler cet événement un total de %action_user_cancelable% fois. L'événement a été déjà annulée %state.action_processing_cancel_counter% fois.
# Number of times the user is allowed to cancel the execution of actions (int)
action_user_cancelable = 0

; === Action processing
# Should action be processed by action processor (bool)
process_actions = true
# Type of action processing (default/login)
action_type = default
# Update the action processor from server before starting it (bool)
update_action_processor = true
# Command which should be executed before start of action processor
pre_action_processor_command =
# Action processor command (string)
action_processor_command = %action_processor.command%
# The desktop on which the action processor command will be started on (current/default/winlogon)
action_processor_desktop = current
# Action processor timout in seconds (int)
action_processor_timeout = 10800
# Command which should be executed before after action processor has ended
post_action_processor_command =

; === Shutdown notification (if machine should be shut down or rebooted)
# Process shutdown requests from action processor
process_shutdown_requests = true
# Time in seconds for how long the shutdown notification is shown (int, 0 to disable)
shutdown_warning_time = 0
# Shutdown notifier command (string)
shutdown_notifier_command = %opsiclientd_notifier.command% -s notifier\\shutdown.ini
# The desktop on which the action notifier will be shown on (current/default/winlogon)
shutdown_notifier_desktop = current
# Message shown in the shutdown notifier window (string)
shutdown_warning_message = A reboot is required to complete software installation tasks. You are allowed to delay this reboot a total of %shutdown_user_cancelable% time(s). The reboot was already delayed %state.shutdown_cancel_counter% time(s).
# German translation (string)
shutdown_warning_message[de] = Ein Neustart wird benötigt um die Software-Installationen abzuschliessen. Sie können diesen Neustart insgesamt %shutdown_user_cancelable% mal verschieben. Der Neustart wurde bereits %state.shutdown_cancel_counter% mal verschoben.
# French translation (string)
shutdown_warning_message[fr] = Un redémarrage est nécessaire pour terminer l'installation du logiciel. Vous êtes autorisé à retarder le redémarrage un total de %shutdown_user_cancelable% fois. Le redémarrage a été déjà retardé %state.shutdown_cancel_counter% fois.
# Number of times the user is allowed to cancel the shutdown (int)
shutdown_user_cancelable = 0
# Time in seconds after the shutdown notification will be shown again after the user has canceled the shutdown (int)
shutdown_warning_repetition_time = 3600

[event_gui_startup]
super = default
type = gui startup
name = gui_startup
block_login = true

[event_gui_startup{user_logged_in}]
name = gui_startup
shutdown_warning_time = 300
block_login = false

[event_gui_startup{cache_ready}]
use_cached_config = true
use_cached_products = true
action_user_cancelable = 3
action_warning_time = 60

[event_gui_startup{installation_pending}]
name = gui_startup
active = true

[event_on_demand]
super = default
type = custom
name = on_demand

[event_on_demand{user_logged_in}]
name = on_demand
shutdown_warning_time = 300

[event_software_on_demand]
super = default
type = sw on demand

[event_sync]
super = default
type = template
process_actions = false
event_notifier_command = 
sync_config_to_server = true
sync_config_from_server = true
cache_products = true
cache_dynamic_bandwidth = true

[event_timer]
super = sync
type = timer
active = false
interval = 3600

[event_net_connection]
super = sync
type = custom
active = false
wql = SELECT * FROM __InstanceModificationEvent WITHIN 2 WHERE TargetInstance ISA 'Win32_NetworkAdapter' AND TargetInstance.NetConnectionStatus = 2

[event_sync_completed]
super = default
type = sync completed
event_notifier_command = 
process_actions = false
get_config_from_service = false
write_log_to_service = false

[event_sync_completed{cache_ready_user_logged_in}]
reboot = true
shutdown_user_cancelable = 10
shutdown_warning_time = 300

[event_sync_completed{cache_ready}]
reboot = true

[event_user_login]
super = default
type = user login
action_type = login
active = false
action_message = Starting to process user login actions.
action_message[de] = Beginne mit der Verarbeitung der Benutzer-Anmeldungs-Aktionen.
action_message[fr] = Traitement des actions à la connexion de l'utilisateur.
block_login = false
process_shutdown_requests = false
get_config_from_service = false
update_config_file = false
write_log_to_service = false
update_action_processor = true
event_notifier_command = %opsiclientd_notifier.command% -s notifier\\userlogin.ini
event_notifier_desktop = default
action_processor_command = %action_processor.command% /sessionid %service_session% /allloginscripts /silent
action_processor_desktop = default
action_processor_timeout = 300

[event_on_shutdown]
super = default
type = custom
name = on_shutdown
active = False

[event_on_shutdown{installation_pending}]
name = on_shutdown
active = False

[event_silent_install]
super = default
type = custom
name = silent_install
event_notifier_command =
process_shutdown_requests = false
action_processor_productIds = swaudit,hwaudit
action_processor_command = %action_processor.command% /productlist %action_processor_productIds% /silent
action_processor_desktop = winlogon
action_processor_timeout = 300

[event_timer_silentinstall]
super = silent_install
type = timer
active = false
interval = 21600

[precondition_user_logged_in]
user_logged_in = true

[precondition_cache_ready]
config_cached = true
products_cached = true

[precondition_cache_ready_user_logged_in]
user_logged_in = true
config_cached = true
products_cached = true

[precondition_installation_pending]
installation_pending = true


Gefunden habe ich die in: \opt_pcbin\install\opsi-client-agent\files\opsi\dist\opsiclientd
Gruß
D1Ck3n
Benutzeravatar
tobias
Beiträge: 1294
Registriert: 20 Aug 2008, 12:36
Wohnort: Braunschweig
Kontaktdaten:

Re: WAN/VPN Erweiterung einrichten klappt nicht

Beitrag von tobias »

[event_vpn_startup]
kenn ich z.b. nicht
Benutzeravatar
D1Ck3n
Beiträge: 191
Registriert: 15 Mär 2013, 11:05

Re: WAN/VPN Erweiterung einrichten klappt nicht

Beitrag von D1Ck3n »

tobias hat geschrieben:[event_vpn_startup]
kenn ich z.b. nicht
Kannst du mir deine Config mal zeigen? Dann kann ich mal gucken, was bei mir fehlt.
Gruß
D1Ck3n
Antworten