Windows 10 Upgrade - Error
Windows 10 Upgrade - Error
Moin zusammen,
bin schon sehr lange am Suchen und komme einfach nicht dahinter - vlt bin ich auch einfach zu blöd.
Die Installation läuft soweit durch, dennoch kriege ich folgende Error:
(1951) [3] [2022-01-28 08:47:33.352] [windows10-upgrade] HTTPSender Post failed
(1952) [3] [2022-01-28 08:47:33.352] [windows10-upgrade] HTTPSender result: 0 msg:
(1983) [3] [2022-01-28 08:47:33.387] [windows10-upgrade] Error: Received no json object from opsiServiceCall_configState_getObjects
(2236) [3] [2022-01-28 08:47:34.254] [windows10-upgrade] Error: Received no json object from opsiServiceCall_configState_getObjects
(2257) [3] [2022-01-28 08:47:34.259] [windows10-upgrade] Error: Exception at jsonAsObjectHasKey with : "","_isGeneratedDefault"
(2262) [3] [2022-01-28 08:47:34.260] [windows10-upgrade] Error: Exception at jsonAsObjectHasKey with : "","ident"
(2267) [3] [2022-01-28 08:47:34.260] [windows10-upgrade] Error: Exception at jsonAsObjectSetValueByKey with: "","values","["0"]"
(2274) [3] [2022-01-28 08:47:34.282] [windows10-upgrade] Error: retrieveJSONObject --- opsi service problem ----> {"message":"'' is not a <class 'opsicommon.objects.ConfigState'>","details":null,"class":"ValueError"}
(2275) [3] [2022-01-28 08:47:34.282] [windows10-upgrade] Received (first 512): {"id":1,"result":null,"error":{"message":"'' is not a <class 'opsicommon.objects.ConfigState'>","class":"ValueError","details":null}}
(2276) [3] [2022-01-28 08:47:34.282] [windows10-upgrade] Error: -> {"message":"'' is not a <class 'opsicommon.objects.ConfigState'>","details":null,"class":"ValueError"}
(2312) [3] [2022-01-28 08:47:34.382] [windows10-upgrade] Error: Received no json object from opsiServiceCall_configState_getObjects
(2328) [3] [2022-01-28 08:47:34.385] [windows10-upgrade] Error: Failed to set the shutdown_warning_time to zero
Es geht bei allen Error wohl um die Shutdown_warning time (was ja nicht allzu schlimm scheint) aber ich hätte gerne eine Error-Freie, saubere Installation. Könnte mir jemand auf die Sprünge helfen? Danke
bin schon sehr lange am Suchen und komme einfach nicht dahinter - vlt bin ich auch einfach zu blöd.
Die Installation läuft soweit durch, dennoch kriege ich folgende Error:
(1951) [3] [2022-01-28 08:47:33.352] [windows10-upgrade] HTTPSender Post failed
(1952) [3] [2022-01-28 08:47:33.352] [windows10-upgrade] HTTPSender result: 0 msg:
(1983) [3] [2022-01-28 08:47:33.387] [windows10-upgrade] Error: Received no json object from opsiServiceCall_configState_getObjects
(2236) [3] [2022-01-28 08:47:34.254] [windows10-upgrade] Error: Received no json object from opsiServiceCall_configState_getObjects
(2257) [3] [2022-01-28 08:47:34.259] [windows10-upgrade] Error: Exception at jsonAsObjectHasKey with : "","_isGeneratedDefault"
(2262) [3] [2022-01-28 08:47:34.260] [windows10-upgrade] Error: Exception at jsonAsObjectHasKey with : "","ident"
(2267) [3] [2022-01-28 08:47:34.260] [windows10-upgrade] Error: Exception at jsonAsObjectSetValueByKey with: "","values","["0"]"
(2274) [3] [2022-01-28 08:47:34.282] [windows10-upgrade] Error: retrieveJSONObject --- opsi service problem ----> {"message":"'' is not a <class 'opsicommon.objects.ConfigState'>","details":null,"class":"ValueError"}
(2275) [3] [2022-01-28 08:47:34.282] [windows10-upgrade] Received (first 512): {"id":1,"result":null,"error":{"message":"'' is not a <class 'opsicommon.objects.ConfigState'>","class":"ValueError","details":null}}
(2276) [3] [2022-01-28 08:47:34.282] [windows10-upgrade] Error: -> {"message":"'' is not a <class 'opsicommon.objects.ConfigState'>","details":null,"class":"ValueError"}
(2312) [3] [2022-01-28 08:47:34.382] [windows10-upgrade] Error: Received no json object from opsiServiceCall_configState_getObjects
(2328) [3] [2022-01-28 08:47:34.385] [windows10-upgrade] Error: Failed to set the shutdown_warning_time to zero
Es geht bei allen Error wohl um die Shutdown_warning time (was ja nicht allzu schlimm scheint) aber ich hätte gerne eine Error-Freie, saubere Installation. Könnte mir jemand auf die Sprünge helfen? Danke
- SisterOfMercy
- Beiträge: 1523
- Registriert: 22 Jun 2012, 19:18
Re: Windows 10 Upgrade - Error
I think we need versions and more logs!
Bitte schreiben Sie Deutsch, when I'm responding in the German-speaking part of the forum!
Re: Windows 10 Upgrade - Error
Moin Nico,
bitte mal mit der aktuellsten Version aus experimental testen:
https://download.uib.de/4.2/experimenta ... 1h2-1.opsi
Die aktuelle Version des Pakets benötigt diese opsi-client-agent und opsi-script Versionen:
https://download.uib.de/4.2/experimenta ... .20-1.opsi
https://download.uib.de/4.2/experimenta ... .35-7.opsi
MfG
Matze
bitte mal mit der aktuellsten Version aus experimental testen:
https://download.uib.de/4.2/experimenta ... 1h2-1.opsi
Die aktuelle Version des Pakets benötigt diese opsi-client-agent und opsi-script Versionen:
https://download.uib.de/4.2/experimenta ... .20-1.opsi
https://download.uib.de/4.2/experimenta ... .35-7.opsi
MfG
Matze
Re: Windows 10 Upgrade - Error
Moin nochmal,
Hat leider bisher auch nicht funktioniert... scheint wohl nicht an die Registry dran zu kommen um den Wert auf für die ShutdownWarningTime auf 0 zu setzen, habe bisher immernoch keine Lösung.
Nach Stage 1 möchte er ja ein Neustart und dieser wird durch den Fehler halt auf 60 Minuten gesetzt
Hat vielleicht noch jemand eine Idee?
Hat leider bisher auch nicht funktioniert... scheint wohl nicht an die Registry dran zu kommen um den Wert auf für die ShutdownWarningTime auf 0 zu setzen, habe bisher immernoch keine Lösung.
Nach Stage 1 möchte er ja ein Neustart und dieser wird durch den Fehler halt auf 60 Minuten gesetzt
Hat vielleicht noch jemand eine Idee?
Re: Windows 10 Upgrade - Error
Hier dazu einmal die Logs auf Log-Level 7:
(24793) [6] [2022-02-11 09:06:58.488] [windows10-upgrade] ~~~~~~~ Start Sub ~~~~~~~ Sub_Prepare_AutoLogon
(24794) [5] [2022-02-11 09:06:58.530] [windows10-upgrade] comment: Reading the current AutoLogon and LastLoggedOnUser values for backup
(24795) [6] [2022-02-11 09:06:58.530] [windows10-upgrade] Set $AutoName$ = GetRegistryValue("HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon", "DefaultUserName", "SysNative")
(24796) [7] [2022-02-11 09:06:58.530] [windows10-upgrade] Registry started readonly
(24797) [7] [2022-02-11 09:06:58.530] [windows10-upgrade] Registry started without redirection (64 Bit)
(24798) [6] [2022-02-11 09:06:58.530] [windows10-upgrade] Registry key [HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon] opened
(24799) [6] [2022-02-11 09:06:58.531] [windows10-upgrade] Key closed
(24800) [6] [2022-02-11 09:06:58.531] [windows10-upgrade] The value of the variable "$AutoName$" is now: "Test"
(24801) [6] [2022-02-11 09:06:58.531] [windows10-upgrade] If
(24802) [6] [2022-02-11 09:06:58.531] [windows10-upgrade] $AutoName$ = "opsiSetupUser" <<< result false
(24803) [6] [2022-02-11 09:06:58.531] [windows10-upgrade] Then
(24804) [6] [2022-02-11 09:06:58.531] [windows10-upgrade] Else
(24805) [6] [2022-02-11 09:06:58.531] [windows10-upgrade] Set $AutoPass$ = asConfidential(GetRegistryValue("HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon", "DefaultPassword", "SysNative"))
(24806) [6] [2022-02-11 09:06:58.532] [windows10-upgrade] The value of the variable "$AutoPass$" is now: ""
(24807) [6] [2022-02-11 09:06:58.532] [windows10-upgrade] Set $AutoDom$ = GetRegistryValue("HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon", "DefaultDomainName", "SysNative")
(24808) [7] [2022-02-11 09:06:58.532] [windows10-upgrade] Registry started readonly
(24809) [7] [2022-02-11 09:06:58.532] [windows10-upgrade] Registry started without redirection (64 Bit)
(24810) [6] [2022-02-11 09:06:58.532] [windows10-upgrade] Registry key [HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon] opened
(24811) [6] [2022-02-11 09:06:58.532] [windows10-upgrade] Key closed
(24812) [6] [2022-02-11 09:06:58.532] [windows10-upgrade] The value of the variable "$AutoDom$" is now: ""
(24813) [6] [2022-02-11 09:06:58.532] [windows10-upgrade] Set $AutoLogon$ = GetRegistryValue("HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon", "AutoAdminLogon", "SysNative")
(24814) [7] [2022-02-11 09:06:58.533] [windows10-upgrade] Registry started readonly
(24815) [7] [2022-02-11 09:06:58.533] [windows10-upgrade] Registry started without redirection (64 Bit)
(24816) [6] [2022-02-11 09:06:58.533] [windows10-upgrade] Registry key [HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon] opened
(24817) [6] [2022-02-11 09:06:58.533] [windows10-upgrade] Key closed
(24818) [6] [2022-02-11 09:06:58.533] [windows10-upgrade] The value of the variable "$AutoLogon$" is now: "0"
(24819) [6] [2022-02-11 09:06:58.533] [windows10-upgrade] EndIf
(24820) [6] [2022-02-11 09:06:58.533] [windows10-upgrade] Set $LastLogon$ = GetRegistryValue("HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Authentication\LogonUI", "LastLoggedOnUser", "SysNative")
(24821) [7] [2022-02-11 09:06:58.533] [windows10-upgrade] Registry started readonly
(24822) [7] [2022-02-11 09:06:58.533] [windows10-upgrade] Registry started without redirection (64 Bit)
(24823) [6] [2022-02-11 09:06:58.533] [windows10-upgrade] Registry key [HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Authentication\LogonUI] opened
(24824) [6] [2022-02-11 09:06:58.533] [windows10-upgrade] Key closed
(24825) [6] [2022-02-11 09:06:58.533] [windows10-upgrade] The value of the variable "$LastLogon$" is now: ".\Test"
(24826) [6] [2022-02-11 09:06:58.533] [windows10-upgrade] Set $LastLoggedOnSAMUser$ = GetRegistryValue("HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Authentication\LogonUI", "LastLoggedOnSAMUser", "SysNative")
(24827) [7] [2022-02-11 09:06:58.537] [windows10-upgrade] Registry started readonly
(24828) [7] [2022-02-11 09:06:58.538] [windows10-upgrade] Registry started without redirection (64 Bit)
(24829) [6] [2022-02-11 09:06:58.538] [windows10-upgrade] Registry key [HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Authentication\LogonUI] opened
(24830) [6] [2022-02-11 09:06:58.538] [windows10-upgrade] Key closed
(24831) [6] [2022-02-11 09:06:58.538] [windows10-upgrade] The value of the variable "$LastLoggedOnSAMUser$" is now: ".\Test"
(24832) [5] [2022-02-11 09:06:58.538] [windows10-upgrade] comment: Backing up the current AutoLogon and LastLoggedOnUser values
(24833) [5] [2022-02-11 09:06:58.539] [windows10-upgrade] Execution of: Registry_Backup_AutoLogon /32bit
(24834) [5] [2022-02-11 09:06:58.539] [windows10-upgrade]
(24835) [7] [2022-02-11 09:06:58.539] [windows10-upgrade] Registry started with redirection (32 Bit)
(24836) [7] [2022-02-11 09:06:58.539] [windows10-upgrade] Key is: HKLM\SOFTWARE\opsi.org\winst\windows10-upgrade\AutoLogonBackup
(24837) [6] [2022-02-11 09:06:58.539] [windows10-upgrade] Registry key [HKLM\SOFTWARE\opsi.org\winst\windows10-upgrade\AutoLogonBackup] created
(24838) [6] [2022-02-11 09:06:58.539] [windows10-upgrade] Variable "DefaultUserName" set to "Test"
(24839) [6] [2022-02-11 09:06:58.540] [windows10-upgrade] Variable "DefaultPassword" set to ""
(24840) [6] [2022-02-11 09:06:58.540] [windows10-upgrade] Variable "DefaultDomainName" set to ""
(24841) [6] [2022-02-11 09:06:58.540] [windows10-upgrade] Variable "AutoAdminLogon" set to "0"
(24842) [6] [2022-02-11 09:06:58.540] [windows10-upgrade] Variable "LastLogon" set to ".\Test"
(24843) [6] [2022-02-11 09:06:58.540] [windows10-upgrade] Variable "LastLoggedOnSAMUser" set to ".\Test"
(24844) [6] [2022-02-11 09:06:58.540] [windows10-upgrade] Key closed
(24845) [5] [2022-02-11 09:06:58.540] [windows10-upgrade] comment: Determining if UAC needs to be disabled
(24846) [6] [2022-02-11 09:06:58.540] [windows10-upgrade] If
(24847) [6] [2022-02-11 09:06:58.541] [windows10-upgrade] $DisableUAC$ = "true" <<< result true
(24848) [6] [2022-02-11 09:06:58.541] [windows10-upgrade] Then
(24849) [5] [2022-02-11 09:06:58.541] [windows10-upgrade] comment: Backing up the current UAC values
(24850) [6] [2022-02-11 09:06:58.541] [windows10-upgrade] Set $BackupConsentPromptBehaviorAdmin$ = GetRegistryValue("HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System", "ConsentPromptBehaviorAdmin", "SysNative")
(24851) [7] [2022-02-11 09:06:58.542] [windows10-upgrade] Registry started readonly
(24852) [7] [2022-02-11 09:06:58.542] [windows10-upgrade] Registry started without redirection (64 Bit)
(24853) [6] [2022-02-11 09:06:58.542] [windows10-upgrade] Registry key [HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System] opened
(24854) [6] [2022-02-11 09:06:58.542] [windows10-upgrade] Key closed
(24855) [6] [2022-02-11 09:06:58.542] [windows10-upgrade] The value of the variable "$BackupConsentPromptBehaviorAdmin$" is now: "0"
(24856) [6] [2022-02-11 09:06:58.542] [windows10-upgrade] Set $BackupEnableInstallerDetection$ = GetRegistryValue("HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System", "EnableInstallerDetection", "SysNative")
(24857) [7] [2022-02-11 09:06:58.543] [windows10-upgrade] Registry started readonly
(24858) [7] [2022-02-11 09:06:58.543] [windows10-upgrade] Registry started without redirection (64 Bit)
(24859) [6] [2022-02-11 09:06:58.543] [windows10-upgrade] Registry key [HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System] opened
(24860) [6] [2022-02-11 09:06:58.543] [windows10-upgrade] Key closed
(24861) [6] [2022-02-11 09:06:58.543] [windows10-upgrade] The value of the variable "$BackupEnableInstallerDetection$" is now: "1"
(24862) [6] [2022-02-11 09:06:58.543] [windows10-upgrade] Set $BackupEnableLUA$ = GetRegistryValue("HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System", "EnableLUA", "SysNative")
(24863) [7] [2022-02-11 09:06:58.543] [windows10-upgrade] Registry started readonly
(24864) [7] [2022-02-11 09:06:58.544] [windows10-upgrade] Registry started without redirection (64 Bit)
(24865) [6] [2022-02-11 09:06:58.544] [windows10-upgrade] Registry key [HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System] opened
(24866) [6] [2022-02-11 09:06:58.544] [windows10-upgrade] Key closed
(24867) [6] [2022-02-11 09:06:58.544] [windows10-upgrade] The value of the variable "$BackupEnableLUA$" is now: "0"
(24868) [6] [2022-02-11 09:06:58.544] [windows10-upgrade] Set $BackupEnableVirtualization$ = GetRegistryValue("HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System", "EnableVirtualization", "SysNative")
(24869) [7] [2022-02-11 09:06:58.544] [windows10-upgrade] Registry started readonly
(24870) [7] [2022-02-11 09:06:58.544] [windows10-upgrade] Registry started without redirection (64 Bit)
(24871) [6] [2022-02-11 09:06:58.544] [windows10-upgrade] Registry key [HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System] opened
(24872) [6] [2022-02-11 09:06:58.545] [windows10-upgrade] Key closed
(24873) [6] [2022-02-11 09:06:58.545] [windows10-upgrade] The value of the variable "$BackupEnableVirtualization$" is now: "1"
(24874) [6] [2022-02-11 09:06:58.545] [windows10-upgrade] Set $BackupPromptOnSecureDesktop$ = GetRegistryValue("HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System", "PromptOnSecureDesktop", "SysNative")
(24875) [7] [2022-02-11 09:06:58.545] [windows10-upgrade] Registry started readonly
(24876) [7] [2022-02-11 09:06:58.545] [windows10-upgrade] Registry started without redirection (64 Bit)
(24877) [6] [2022-02-11 09:06:58.545] [windows10-upgrade] Registry key [HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System] opened
(24878) [6] [2022-02-11 09:06:58.545] [windows10-upgrade] Key closed
(24879) [6] [2022-02-11 09:06:58.545] [windows10-upgrade] The value of the variable "$BackupPromptOnSecureDesktop$" is now: "0"
(24880) [5] [2022-02-11 09:06:58.547] [windows10-upgrade] Execution of: Registry_Backup_UAC /32bit
(24881) [5] [2022-02-11 09:06:58.547] [windows10-upgrade]
(24882) [7] [2022-02-11 09:06:58.547] [windows10-upgrade] Registry started with redirection (32 Bit)
(24883) [7] [2022-02-11 09:06:58.547] [windows10-upgrade] Key is: HKLM\SOFTWARE\opsi.org\winst\windows10-upgrade\AutoLogonBackup
(24884) [6] [2022-02-11 09:06:58.547] [windows10-upgrade] Registry key [HKLM\SOFTWARE\opsi.org\winst\windows10-upgrade\AutoLogonBackup] opened
(24885) [6] [2022-02-11 09:06:58.547] [windows10-upgrade] Variable "ConsentPromptBehaviorAdmin" set to "0"
(24886) [6] [2022-02-11 09:06:58.547] [windows10-upgrade] Variable "EnableInstallerDetection" set to "1"
(24887) [6] [2022-02-11 09:06:58.547] [windows10-upgrade] Variable "EnableLUA" set to "0"
(24888) [6] [2022-02-11 09:06:58.547] [windows10-upgrade] Variable "EnableVirtualization" set to "1"
(24889) [6] [2022-02-11 09:06:58.547] [windows10-upgrade] Variable "PromptOnSecureDesktop" set to "0"
(24890) [6] [2022-02-11 09:06:58.547] [windows10-upgrade] Key closed
(24891) [5] [2022-02-11 09:06:58.548] [windows10-upgrade] comment: Disabling UAC
(24892) [5] [2022-02-11 09:06:58.549] [windows10-upgrade] Execution of: Registry_Disable_UAC /SysNative
(24893) [5] [2022-02-11 09:06:58.549] [windows10-upgrade]
(24894) [7] [2022-02-11 09:06:58.549] [windows10-upgrade] Registry started without redirection (64 Bit)
(24895) [7] [2022-02-11 09:06:58.549] [windows10-upgrade] Key is: HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System
(24896) [6] [2022-02-11 09:06:58.549] [windows10-upgrade] Registry key [HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System] opened
(24897) [6] [2022-02-11 09:06:58.549] [windows10-upgrade] Variable "ConsentPromptBehaviorAdmin" is keeping its value "0"
(24898) [6] [2022-02-11 09:06:58.549] [windows10-upgrade] Variable "EnableInstallerDetection" is keeping its value "1"
(24899) [6] [2022-02-11 09:06:58.549] [windows10-upgrade] Variable "EnableLUA" is keeping its value "0"
(24900) [6] [2022-02-11 09:06:58.549] [windows10-upgrade] Variable "EnableVirtualization" is keeping its value "1"
(24901) [6] [2022-02-11 09:06:58.549] [windows10-upgrade] Variable "PromptOnSecureDesktop" is keeping its value "0"
(24902) [6] [2022-02-11 09:06:58.549] [windows10-upgrade] Key closed
(24903) [6] [2022-02-11 09:06:58.549] [windows10-upgrade] Else
(24904) [6] [2022-02-11 09:06:58.550] [windows10-upgrade] EndIf
(24905) [5] [2022-02-11 09:06:58.550] [windows10-upgrade] comment: Backing up the current shutdown_warning_time
(24906) [5] [2022-02-11 09:06:58.551] [windows10-upgrade] Execution of: OpsiServiceCall_setOption_addConfigStateDefaults_true
(24907) [5] [2022-02-11 09:06:58.551] [windows10-upgrade]
(24908) [6] [2022-02-11 09:06:58.551] [windows10-upgrade] "method": "backend_setOptions"
(24909) [6] [2022-02-11 09:06:58.551] [windows10-upgrade] SslLib should be: C:\Program Files (x86)\opsi.org\opsi-client-agent\opsi-script\ssleay32.dll
(24910) [6] [2022-02-11 09:06:58.566] [windows10-upgrade] JSON Bench for backend_setOptions "params":[{"addConfigStateDefaults":true}],"id":1} Start: 09:06:58:551 Time: 00:00:00:015
(24911) [6] [2022-02-11 09:06:58.566] [windows10-upgrade] JSON result:
(24912) [6] [2022-02-11 09:06:58.567] [windows10-upgrade]
(24913) [6] [2022-02-11 09:06:58.567] [windows10-upgrade] ~~~~~~~ Start Sub ~~~~~~~ Sub_Determine_Shutdown_Warning_Time
(24914) [6] [2022-02-11 09:06:58.609] [windows10-upgrade] Set $opsiServiceCallParameter$ = '{"configId":"opsiclientd.event_software_on_demand.shutdown_warning_time","objectId":"kmpc88.klm.local"}'
(24915) [6] [2022-02-11 09:06:58.609] [windows10-upgrade] The value of the variable "$opsiServiceCallParameter$" is now: "{"configId":"opsiclientd.event_software_on_demand.shutdown_warning_time","objectId":"kmpc88.klm.local"}"
(24916) [6] [2022-02-11 09:06:58.609] [windows10-upgrade] Set $ResultList$ = getReturnListFromSection("opsiServiceCall_configState_getObjects")
(24917) [5] [2022-02-11 09:06:58.610] [windows10-upgrade]
(24918) [6] [2022-02-11 09:06:58.610] [windows10-upgrade] "method": "configState_getObjects"
(24919) [6] [2022-02-11 09:06:58.611] [windows10-upgrade] SslLib should be: C:\Program Files (x86)\opsi.org\opsi-client-agent\opsi-script\ssleay32.dll
(24920) [6] [2022-02-11 09:06:58.656] [windows10-upgrade] JSON Bench for configState_getObjects "params":[[],{"configId":"opsiclientd.event_softwa Start: 09:06:58:610 Time: 00:00:00:046
(24921) [6] [2022-02-11 09:06:58.656] [windows10-upgrade] JSON result: []
(24922) [7] [2022-02-11 09:06:58.656] [windows10-upgrade] The value of the variable "$ResultList$" is now:
(24923) [7] [2022-02-11 09:06:58.656] [windows10-upgrade] (string 0)[]
(24924) [6] [2022-02-11 09:06:58.656] [windows10-upgrade] Set $opsiServiceCallParameter$ = ""
(24925) [6] [2022-02-11 09:06:58.660] [windows10-upgrade] The value of the variable "$opsiServiceCallParameter$" is now: ""
(24926) [6] [2022-02-11 09:06:58.660] [windows10-upgrade] Set $JsonStr$ = takeString(0, $ResultList$)
(24927) [6] [2022-02-11 09:06:58.660] [windows10-upgrade] The value of the variable "$JsonStr$" is now: "[]"
(24928) [6] [2022-02-11 09:06:58.660] [windows10-upgrade] Set $ResultList$ = emptylist($ResultList$)
(24929) [7] [2022-02-11 09:06:58.660] [windows10-upgrade] The value of the variable "$ResultList$" is now:
(24930) [6] [2022-02-11 09:06:58.661] [windows10-upgrade] If
(24931) [7] [2022-02-11 09:06:58.661] [windows10-upgrade] jsonIsValid($JsonStr$) <<< result true
(24932) [6] [2022-02-11 09:06:58.661] [windows10-upgrade] NOT (jsonIsValid($JsonStr$)) <<< result false
(24933) [6] [2022-02-11 09:06:58.661] [windows10-upgrade] Then
(24934) [6] [2022-02-11 09:06:58.661] [windows10-upgrade] Else
(24935) [6] [2022-02-11 09:06:58.661] [windows10-upgrade] If
(24936) [7] [2022-02-11 09:06:58.661] [windows10-upgrade] jsonIsArray($JsonStr$) <<< result true
(24937) [6] [2022-02-11 09:06:58.661] [windows10-upgrade] NOT (jsonIsArray($JsonStr$)) <<< result false
(24938) [6] [2022-02-11 09:06:58.661] [windows10-upgrade] Then
(24939) [6] [2022-02-11 09:06:58.661] [windows10-upgrade] Else
(24940) [6] [2022-02-11 09:06:58.661] [windows10-upgrade] Set $configStateObj$ = jsonAsArrayGetElementByIndex($JsonStr$, "0")
(24941) [6] [2022-02-11 09:06:58.661] [windows10-upgrade] The value of the variable "$configStateObj$" is now: ""
(24942) [6] [2022-02-11 09:06:58.662] [windows10-upgrade] If
(24943) [7] [2022-02-11 09:06:58.662] [windows10-upgrade] jsonIsObject($configStateObj$) <<< result false
(24944) [6] [2022-02-11 09:06:58.662] [windows10-upgrade] NOT (jsonIsObject($configStateObj$)) <<< result true
(24945) [6] [2022-02-11 09:06:58.662] [windows10-upgrade] Then
(24946) [3] [2022-02-11 09:06:58.662] [windows10-upgrade] Error: Received no json object from opsiServiceCall_configState_getObjects
(24947) [6] [2022-02-11 09:06:58.662] [windows10-upgrade] Else
(24948) [6] [2022-02-11 09:06:58.662] [windows10-upgrade] EndIf
(24949) [6] [2022-02-11 09:06:58.662] [windows10-upgrade] EndIf
(24950) [6] [2022-02-11 09:06:58.662] [windows10-upgrade] EndIf
(24951) [6] [2022-02-11 09:06:58.662] [windows10-upgrade]
(24952) [6] [2022-02-11 09:06:58.662] [windows10-upgrade] ~~~~~~~ End Sub ~~~~~~~ Sub_Determine_Shutdown_Warning_Time
(24953) [6] [2022-02-11 09:06:58.662] [windows10-upgrade]
(24954) [6] [2022-02-11 09:06:58.663] [windows10-upgrade] Set $ShutdownWarningTimeBackup$ = $Result$
(24955) [6] [2022-02-11 09:06:58.664] [windows10-upgrade] The value of the variable "$ShutdownWarningTimeBackup$" is now: ""
(24956) [6] [2022-02-11 09:06:58.664] [windows10-upgrade] Set $Result$ = ""
(24957) [6] [2022-02-11 09:06:58.665] [windows10-upgrade] The value of the variable "$Result$" is now: ""
(24958) [5] [2022-02-11 09:06:58.666] [windows10-upgrade] Execution of: Registry_Backup_Shutdown_Warning_Time /32bit
(24959) [5] [2022-02-11 09:06:58.666] [windows10-upgrade]
(24960) [7] [2022-02-11 09:06:58.666] [windows10-upgrade] Registry started with redirection (32 Bit)
(24961) [7] [2022-02-11 09:06:58.666] [windows10-upgrade] Key is: HKLM\SOFTWARE\opsi.org\winst\windows10-upgrade
(24962) [6] [2022-02-11 09:06:58.666] [windows10-upgrade] Registry key [HKLM\SOFTWARE\opsi.org\winst\windows10-upgrade] opened
(24963) [6] [2022-02-11 09:06:58.666] [windows10-upgrade] Variable "ShutdownWarningTimeBackup" set to ""
(24964) [6] [2022-02-11 09:06:58.666] [windows10-upgrade] Key closed
(24965) [5] [2022-02-11 09:06:58.666] [windows10-upgrade] comment: Setting the shutdown_warning_time to zero
(24966) [6] [2022-02-11 09:06:58.666] [windows10-upgrade] If
(24967) [3] [2022-02-11 09:06:58.668] [windows10-upgrade] Error: Exception at jsonAsObjectHasKey with : "","_isGeneratedDefault"
(24968) [6] [2022-02-11 09:06:58.668] [windows10-upgrade] jsonAsObjectHasKey($configStateObj$, "_isGeneratedDefault") <<< result false
(24969) [6] [2022-02-11 09:06:58.668] [windows10-upgrade] Then
(24970) [6] [2022-02-11 09:06:58.668] [windows10-upgrade] EndIf
(24971) [6] [2022-02-11 09:06:58.668] [windows10-upgrade] If
(24972) [3] [2022-02-11 09:06:58.668] [windows10-upgrade] Error: Exception at jsonAsObjectHasKey with : "","ident"
(24973) [6] [2022-02-11 09:06:58.668] [windows10-upgrade] jsonAsObjectHasKey($configStateObj$, "ident") <<< result false
(24974) [6] [2022-02-11 09:06:58.668] [windows10-upgrade] Then
(24975) [6] [2022-02-11 09:06:58.668] [windows10-upgrade] EndIf
(24976) [6] [2022-02-11 09:06:58.668] [windows10-upgrade] Set $configStateObj$ = jsonAsObjectSetValueByKey($configStateObj$, "values", '["0"]')
(24977) [3] [2022-02-11 09:06:58.669] [windows10-upgrade] Error: Exception at jsonAsObjectSetValueByKey with: "","values","["0"]"
(24978) [6] [2022-02-11 09:06:58.669] [windows10-upgrade] The value of the variable "$configStateObj$" is now: ""
(24979) [5] [2022-02-11 09:06:58.670] [windows10-upgrade] Execution of: OpsiServiceCall_Set_Shutdown_Warning_Time
(24980) [5] [2022-02-11 09:06:58.670] [windows10-upgrade]
(24981) [6] [2022-02-11 09:06:58.670] [windows10-upgrade] "method": "configState_insertObject"
(24982) [6] [2022-02-11 09:06:58.670] [windows10-upgrade] SslLib should be: C:\Program Files (x86)\opsi.org\opsi-client-agent\opsi-script\ssleay32.dll
(24983) [6] [2022-02-11 09:06:58.694] [windows10-upgrade] JSON Bench for configState_insertObject "params":[""],"id":1} Start: 09:06:58:670 Time: 00:00:00:024
(24984) [3] [2022-02-11 09:06:58.694] [windows10-upgrade] Error: retrieveJSONObject --- opsi service problem ----> {"message":"'' is not a <class 'opsicommon.objects.ConfigState'>","details":null,"class":"ValueError"}
(24985) [3] [2022-02-11 09:06:58.694] [windows10-upgrade] Received (first 512): {"id":1,"result":null,"error":{"message":"'' is not a <class 'opsicommon.objects.ConfigState'>","class":"ValueError","details":null}}
(24986) [3] [2022-02-11 09:06:58.694] [windows10-upgrade] Error: -> {"message":"'' is not a <class 'opsicommon.objects.ConfigState'>","details":null,"class":"ValueError"}
(24987) [5] [2022-02-11 09:06:58.694] [windows10-upgrade] comment: Testing if the shutdown_warning_time was set to zero
(24988) [6] [2022-02-11 09:06:58.695] [windows10-upgrade]
(24989) [6] [2022-02-11 09:06:58.695] [windows10-upgrade] ~~~~~~~ Start Sub ~~~~~~~ Sub_Determine_Shutdown_Warning_Time
(24990) [6] [2022-02-11 09:06:58.737] [windows10-upgrade] Set $opsiServiceCallParameter$ = '{"configId":"opsiclientd.event_software_on_demand.shutdown_warning_time","objectId":"kmpc88.klm.local"}'
(24991) [6] [2022-02-11 09:06:58.742] [windows10-upgrade] The value of the variable "$opsiServiceCallParameter$" is now: "{"configId":"opsiclientd.event_software_on_demand.shutdown_warning_time","objectId":"kmpc88.klm.local"}"
(24992) [6] [2022-02-11 09:06:58.742] [windows10-upgrade] Set $ResultList$ = getReturnListFromSection("opsiServiceCall_configState_getObjects")
(24993) [5] [2022-02-11 09:06:58.742] [windows10-upgrade]
(24994) [6] [2022-02-11 09:06:58.742] [windows10-upgrade] "method": "configState_getObjects"
(24995) [6] [2022-02-11 09:06:58.742] [windows10-upgrade] SslLib should be: C:\Program Files (x86)\opsi.org\opsi-client-agent\opsi-script\ssleay32.dll
(24996) [6] [2022-02-11 09:06:58.783] [windows10-upgrade] JSON Bench for configState_getObjects "params":[[],{"configId":"opsiclientd.event_softwa Start: 09:06:58:742 Time: 00:00:00:041
(24997) [6] [2022-02-11 09:06:58.783] [windows10-upgrade] JSON result: []
(24998) [7] [2022-02-11 09:06:58.783] [windows10-upgrade] The value of the variable "$ResultList$" is now:
(24999) [7] [2022-02-11 09:06:58.783] [windows10-upgrade] (string 0)[]
(25000) [6] [2022-02-11 09:06:58.783] [windows10-upgrade] Set $opsiServiceCallParameter$ = ""
(25001) [6] [2022-02-11 09:06:58.783] [windows10-upgrade] The value of the variable "$opsiServiceCallParameter$" is now: ""
(25002) [6] [2022-02-11 09:06:58.783] [windows10-upgrade] Set $JsonStr$ = takeString(0, $ResultList$)
(25003) [6] [2022-02-11 09:06:58.783] [windows10-upgrade] The value of the variable "$JsonStr$" is now: "[]"
(25004) [6] [2022-02-11 09:06:58.784] [windows10-upgrade] Set $ResultList$ = emptylist($ResultList$)
(25005) [7] [2022-02-11 09:06:58.784] [windows10-upgrade] The value of the variable "$ResultList$" is now:
(25006) [6] [2022-02-11 09:06:58.784] [windows10-upgrade] If
(25007) [7] [2022-02-11 09:06:58.784] [windows10-upgrade] jsonIsValid($JsonStr$) <<< result true
(25008) [6] [2022-02-11 09:06:58.784] [windows10-upgrade] NOT (jsonIsValid($JsonStr$)) <<< result false
(25009) [6] [2022-02-11 09:06:58.784] [windows10-upgrade] Then
(25010) [6] [2022-02-11 09:06:58.784] [windows10-upgrade] Else
(25011) [6] [2022-02-11 09:06:58.784] [windows10-upgrade] If
(25012) [7] [2022-02-11 09:06:58.784] [windows10-upgrade] jsonIsArray($JsonStr$) <<< result true
(25013) [6] [2022-02-11 09:06:58.784] [windows10-upgrade] NOT (jsonIsArray($JsonStr$)) <<< result false
(25014) [6] [2022-02-11 09:06:58.784] [windows10-upgrade] Then
(25015) [6] [2022-02-11 09:06:58.784] [windows10-upgrade] Else
(25016) [6] [2022-02-11 09:06:58.784] [windows10-upgrade] Set $configStateObj$ = jsonAsArrayGetElementByIndex($JsonStr$, "0")
(25017) [6] [2022-02-11 09:06:58.785] [windows10-upgrade] The value of the variable "$configStateObj$" is now: ""
(25018) [6] [2022-02-11 09:06:58.785] [windows10-upgrade] If
(25019) [7] [2022-02-11 09:06:58.785] [windows10-upgrade] jsonIsObject($configStateObj$) <<< result false
(25020) [6] [2022-02-11 09:06:58.785] [windows10-upgrade] NOT (jsonIsObject($configStateObj$)) <<< result true
(25021) [6] [2022-02-11 09:06:58.785] [windows10-upgrade] Then
(25022) [3] [2022-02-11 09:06:58.785] [windows10-upgrade] Error: Received no json object from opsiServiceCall_configState_getObjects
(25023) [6] [2022-02-11 09:06:58.785] [windows10-upgrade] Else
(25024) [6] [2022-02-11 09:06:58.785] [windows10-upgrade] EndIf
(25025) [6] [2022-02-11 09:06:58.785] [windows10-upgrade] EndIf
(25026) [6] [2022-02-11 09:06:58.785] [windows10-upgrade] EndIf
(25027) [6] [2022-02-11 09:06:58.785] [windows10-upgrade]
(25028) [6] [2022-02-11 09:06:58.785] [windows10-upgrade] ~~~~~~~ End Sub ~~~~~~~ Sub_Determine_Shutdown_Warning_Time
(25029) [6] [2022-02-11 09:06:58.785] [windows10-upgrade]
(25030) [6] [2022-02-11 09:06:58.786] [windows10-upgrade] Set $ShutdownWarningTime$ = $Result$
(25031) [6] [2022-02-11 09:06:58.787] [windows10-upgrade] The value of the variable "$ShutdownWarningTime$" is now: ""
(25032) [6] [2022-02-11 09:06:58.788] [windows10-upgrade] Set $Result$ = ""
(25033) [6] [2022-02-11 09:06:58.788] [windows10-upgrade] The value of the variable "$Result$" is now: ""
(25034) [6] [2022-02-11 09:06:58.788] [windows10-upgrade] If
(25035) [6] [2022-02-11 09:06:58.788] [windows10-upgrade] $ShutdownWarningTime$ = "0" <<< result false
(25036) [6] [2022-02-11 09:06:58.788] [windows10-upgrade] Then
(25037) [6] [2022-02-11 09:06:58.788] [windows10-upgrade] Else
(25038) [3] [2022-02-11 09:06:58.789] [windows10-upgrade] Error: Failed to set the shutdown_warning_time to zero
(25039) [6] [2022-02-11 09:06:58.789] [windows10-upgrade] EndIf
(24793) [6] [2022-02-11 09:06:58.488] [windows10-upgrade] ~~~~~~~ Start Sub ~~~~~~~ Sub_Prepare_AutoLogon
(24794) [5] [2022-02-11 09:06:58.530] [windows10-upgrade] comment: Reading the current AutoLogon and LastLoggedOnUser values for backup
(24795) [6] [2022-02-11 09:06:58.530] [windows10-upgrade] Set $AutoName$ = GetRegistryValue("HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon", "DefaultUserName", "SysNative")
(24796) [7] [2022-02-11 09:06:58.530] [windows10-upgrade] Registry started readonly
(24797) [7] [2022-02-11 09:06:58.530] [windows10-upgrade] Registry started without redirection (64 Bit)
(24798) [6] [2022-02-11 09:06:58.530] [windows10-upgrade] Registry key [HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon] opened
(24799) [6] [2022-02-11 09:06:58.531] [windows10-upgrade] Key closed
(24800) [6] [2022-02-11 09:06:58.531] [windows10-upgrade] The value of the variable "$AutoName$" is now: "Test"
(24801) [6] [2022-02-11 09:06:58.531] [windows10-upgrade] If
(24802) [6] [2022-02-11 09:06:58.531] [windows10-upgrade] $AutoName$ = "opsiSetupUser" <<< result false
(24803) [6] [2022-02-11 09:06:58.531] [windows10-upgrade] Then
(24804) [6] [2022-02-11 09:06:58.531] [windows10-upgrade] Else
(24805) [6] [2022-02-11 09:06:58.531] [windows10-upgrade] Set $AutoPass$ = asConfidential(GetRegistryValue("HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon", "DefaultPassword", "SysNative"))
(24806) [6] [2022-02-11 09:06:58.532] [windows10-upgrade] The value of the variable "$AutoPass$" is now: ""
(24807) [6] [2022-02-11 09:06:58.532] [windows10-upgrade] Set $AutoDom$ = GetRegistryValue("HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon", "DefaultDomainName", "SysNative")
(24808) [7] [2022-02-11 09:06:58.532] [windows10-upgrade] Registry started readonly
(24809) [7] [2022-02-11 09:06:58.532] [windows10-upgrade] Registry started without redirection (64 Bit)
(24810) [6] [2022-02-11 09:06:58.532] [windows10-upgrade] Registry key [HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon] opened
(24811) [6] [2022-02-11 09:06:58.532] [windows10-upgrade] Key closed
(24812) [6] [2022-02-11 09:06:58.532] [windows10-upgrade] The value of the variable "$AutoDom$" is now: ""
(24813) [6] [2022-02-11 09:06:58.532] [windows10-upgrade] Set $AutoLogon$ = GetRegistryValue("HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon", "AutoAdminLogon", "SysNative")
(24814) [7] [2022-02-11 09:06:58.533] [windows10-upgrade] Registry started readonly
(24815) [7] [2022-02-11 09:06:58.533] [windows10-upgrade] Registry started without redirection (64 Bit)
(24816) [6] [2022-02-11 09:06:58.533] [windows10-upgrade] Registry key [HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon] opened
(24817) [6] [2022-02-11 09:06:58.533] [windows10-upgrade] Key closed
(24818) [6] [2022-02-11 09:06:58.533] [windows10-upgrade] The value of the variable "$AutoLogon$" is now: "0"
(24819) [6] [2022-02-11 09:06:58.533] [windows10-upgrade] EndIf
(24820) [6] [2022-02-11 09:06:58.533] [windows10-upgrade] Set $LastLogon$ = GetRegistryValue("HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Authentication\LogonUI", "LastLoggedOnUser", "SysNative")
(24821) [7] [2022-02-11 09:06:58.533] [windows10-upgrade] Registry started readonly
(24822) [7] [2022-02-11 09:06:58.533] [windows10-upgrade] Registry started without redirection (64 Bit)
(24823) [6] [2022-02-11 09:06:58.533] [windows10-upgrade] Registry key [HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Authentication\LogonUI] opened
(24824) [6] [2022-02-11 09:06:58.533] [windows10-upgrade] Key closed
(24825) [6] [2022-02-11 09:06:58.533] [windows10-upgrade] The value of the variable "$LastLogon$" is now: ".\Test"
(24826) [6] [2022-02-11 09:06:58.533] [windows10-upgrade] Set $LastLoggedOnSAMUser$ = GetRegistryValue("HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Authentication\LogonUI", "LastLoggedOnSAMUser", "SysNative")
(24827) [7] [2022-02-11 09:06:58.537] [windows10-upgrade] Registry started readonly
(24828) [7] [2022-02-11 09:06:58.538] [windows10-upgrade] Registry started without redirection (64 Bit)
(24829) [6] [2022-02-11 09:06:58.538] [windows10-upgrade] Registry key [HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Authentication\LogonUI] opened
(24830) [6] [2022-02-11 09:06:58.538] [windows10-upgrade] Key closed
(24831) [6] [2022-02-11 09:06:58.538] [windows10-upgrade] The value of the variable "$LastLoggedOnSAMUser$" is now: ".\Test"
(24832) [5] [2022-02-11 09:06:58.538] [windows10-upgrade] comment: Backing up the current AutoLogon and LastLoggedOnUser values
(24833) [5] [2022-02-11 09:06:58.539] [windows10-upgrade] Execution of: Registry_Backup_AutoLogon /32bit
(24834) [5] [2022-02-11 09:06:58.539] [windows10-upgrade]
(24835) [7] [2022-02-11 09:06:58.539] [windows10-upgrade] Registry started with redirection (32 Bit)
(24836) [7] [2022-02-11 09:06:58.539] [windows10-upgrade] Key is: HKLM\SOFTWARE\opsi.org\winst\windows10-upgrade\AutoLogonBackup
(24837) [6] [2022-02-11 09:06:58.539] [windows10-upgrade] Registry key [HKLM\SOFTWARE\opsi.org\winst\windows10-upgrade\AutoLogonBackup] created
(24838) [6] [2022-02-11 09:06:58.539] [windows10-upgrade] Variable "DefaultUserName" set to "Test"
(24839) [6] [2022-02-11 09:06:58.540] [windows10-upgrade] Variable "DefaultPassword" set to ""
(24840) [6] [2022-02-11 09:06:58.540] [windows10-upgrade] Variable "DefaultDomainName" set to ""
(24841) [6] [2022-02-11 09:06:58.540] [windows10-upgrade] Variable "AutoAdminLogon" set to "0"
(24842) [6] [2022-02-11 09:06:58.540] [windows10-upgrade] Variable "LastLogon" set to ".\Test"
(24843) [6] [2022-02-11 09:06:58.540] [windows10-upgrade] Variable "LastLoggedOnSAMUser" set to ".\Test"
(24844) [6] [2022-02-11 09:06:58.540] [windows10-upgrade] Key closed
(24845) [5] [2022-02-11 09:06:58.540] [windows10-upgrade] comment: Determining if UAC needs to be disabled
(24846) [6] [2022-02-11 09:06:58.540] [windows10-upgrade] If
(24847) [6] [2022-02-11 09:06:58.541] [windows10-upgrade] $DisableUAC$ = "true" <<< result true
(24848) [6] [2022-02-11 09:06:58.541] [windows10-upgrade] Then
(24849) [5] [2022-02-11 09:06:58.541] [windows10-upgrade] comment: Backing up the current UAC values
(24850) [6] [2022-02-11 09:06:58.541] [windows10-upgrade] Set $BackupConsentPromptBehaviorAdmin$ = GetRegistryValue("HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System", "ConsentPromptBehaviorAdmin", "SysNative")
(24851) [7] [2022-02-11 09:06:58.542] [windows10-upgrade] Registry started readonly
(24852) [7] [2022-02-11 09:06:58.542] [windows10-upgrade] Registry started without redirection (64 Bit)
(24853) [6] [2022-02-11 09:06:58.542] [windows10-upgrade] Registry key [HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System] opened
(24854) [6] [2022-02-11 09:06:58.542] [windows10-upgrade] Key closed
(24855) [6] [2022-02-11 09:06:58.542] [windows10-upgrade] The value of the variable "$BackupConsentPromptBehaviorAdmin$" is now: "0"
(24856) [6] [2022-02-11 09:06:58.542] [windows10-upgrade] Set $BackupEnableInstallerDetection$ = GetRegistryValue("HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System", "EnableInstallerDetection", "SysNative")
(24857) [7] [2022-02-11 09:06:58.543] [windows10-upgrade] Registry started readonly
(24858) [7] [2022-02-11 09:06:58.543] [windows10-upgrade] Registry started without redirection (64 Bit)
(24859) [6] [2022-02-11 09:06:58.543] [windows10-upgrade] Registry key [HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System] opened
(24860) [6] [2022-02-11 09:06:58.543] [windows10-upgrade] Key closed
(24861) [6] [2022-02-11 09:06:58.543] [windows10-upgrade] The value of the variable "$BackupEnableInstallerDetection$" is now: "1"
(24862) [6] [2022-02-11 09:06:58.543] [windows10-upgrade] Set $BackupEnableLUA$ = GetRegistryValue("HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System", "EnableLUA", "SysNative")
(24863) [7] [2022-02-11 09:06:58.543] [windows10-upgrade] Registry started readonly
(24864) [7] [2022-02-11 09:06:58.544] [windows10-upgrade] Registry started without redirection (64 Bit)
(24865) [6] [2022-02-11 09:06:58.544] [windows10-upgrade] Registry key [HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System] opened
(24866) [6] [2022-02-11 09:06:58.544] [windows10-upgrade] Key closed
(24867) [6] [2022-02-11 09:06:58.544] [windows10-upgrade] The value of the variable "$BackupEnableLUA$" is now: "0"
(24868) [6] [2022-02-11 09:06:58.544] [windows10-upgrade] Set $BackupEnableVirtualization$ = GetRegistryValue("HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System", "EnableVirtualization", "SysNative")
(24869) [7] [2022-02-11 09:06:58.544] [windows10-upgrade] Registry started readonly
(24870) [7] [2022-02-11 09:06:58.544] [windows10-upgrade] Registry started without redirection (64 Bit)
(24871) [6] [2022-02-11 09:06:58.544] [windows10-upgrade] Registry key [HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System] opened
(24872) [6] [2022-02-11 09:06:58.545] [windows10-upgrade] Key closed
(24873) [6] [2022-02-11 09:06:58.545] [windows10-upgrade] The value of the variable "$BackupEnableVirtualization$" is now: "1"
(24874) [6] [2022-02-11 09:06:58.545] [windows10-upgrade] Set $BackupPromptOnSecureDesktop$ = GetRegistryValue("HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System", "PromptOnSecureDesktop", "SysNative")
(24875) [7] [2022-02-11 09:06:58.545] [windows10-upgrade] Registry started readonly
(24876) [7] [2022-02-11 09:06:58.545] [windows10-upgrade] Registry started without redirection (64 Bit)
(24877) [6] [2022-02-11 09:06:58.545] [windows10-upgrade] Registry key [HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System] opened
(24878) [6] [2022-02-11 09:06:58.545] [windows10-upgrade] Key closed
(24879) [6] [2022-02-11 09:06:58.545] [windows10-upgrade] The value of the variable "$BackupPromptOnSecureDesktop$" is now: "0"
(24880) [5] [2022-02-11 09:06:58.547] [windows10-upgrade] Execution of: Registry_Backup_UAC /32bit
(24881) [5] [2022-02-11 09:06:58.547] [windows10-upgrade]
(24882) [7] [2022-02-11 09:06:58.547] [windows10-upgrade] Registry started with redirection (32 Bit)
(24883) [7] [2022-02-11 09:06:58.547] [windows10-upgrade] Key is: HKLM\SOFTWARE\opsi.org\winst\windows10-upgrade\AutoLogonBackup
(24884) [6] [2022-02-11 09:06:58.547] [windows10-upgrade] Registry key [HKLM\SOFTWARE\opsi.org\winst\windows10-upgrade\AutoLogonBackup] opened
(24885) [6] [2022-02-11 09:06:58.547] [windows10-upgrade] Variable "ConsentPromptBehaviorAdmin" set to "0"
(24886) [6] [2022-02-11 09:06:58.547] [windows10-upgrade] Variable "EnableInstallerDetection" set to "1"
(24887) [6] [2022-02-11 09:06:58.547] [windows10-upgrade] Variable "EnableLUA" set to "0"
(24888) [6] [2022-02-11 09:06:58.547] [windows10-upgrade] Variable "EnableVirtualization" set to "1"
(24889) [6] [2022-02-11 09:06:58.547] [windows10-upgrade] Variable "PromptOnSecureDesktop" set to "0"
(24890) [6] [2022-02-11 09:06:58.547] [windows10-upgrade] Key closed
(24891) [5] [2022-02-11 09:06:58.548] [windows10-upgrade] comment: Disabling UAC
(24892) [5] [2022-02-11 09:06:58.549] [windows10-upgrade] Execution of: Registry_Disable_UAC /SysNative
(24893) [5] [2022-02-11 09:06:58.549] [windows10-upgrade]
(24894) [7] [2022-02-11 09:06:58.549] [windows10-upgrade] Registry started without redirection (64 Bit)
(24895) [7] [2022-02-11 09:06:58.549] [windows10-upgrade] Key is: HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System
(24896) [6] [2022-02-11 09:06:58.549] [windows10-upgrade] Registry key [HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System] opened
(24897) [6] [2022-02-11 09:06:58.549] [windows10-upgrade] Variable "ConsentPromptBehaviorAdmin" is keeping its value "0"
(24898) [6] [2022-02-11 09:06:58.549] [windows10-upgrade] Variable "EnableInstallerDetection" is keeping its value "1"
(24899) [6] [2022-02-11 09:06:58.549] [windows10-upgrade] Variable "EnableLUA" is keeping its value "0"
(24900) [6] [2022-02-11 09:06:58.549] [windows10-upgrade] Variable "EnableVirtualization" is keeping its value "1"
(24901) [6] [2022-02-11 09:06:58.549] [windows10-upgrade] Variable "PromptOnSecureDesktop" is keeping its value "0"
(24902) [6] [2022-02-11 09:06:58.549] [windows10-upgrade] Key closed
(24903) [6] [2022-02-11 09:06:58.549] [windows10-upgrade] Else
(24904) [6] [2022-02-11 09:06:58.550] [windows10-upgrade] EndIf
(24905) [5] [2022-02-11 09:06:58.550] [windows10-upgrade] comment: Backing up the current shutdown_warning_time
(24906) [5] [2022-02-11 09:06:58.551] [windows10-upgrade] Execution of: OpsiServiceCall_setOption_addConfigStateDefaults_true
(24907) [5] [2022-02-11 09:06:58.551] [windows10-upgrade]
(24908) [6] [2022-02-11 09:06:58.551] [windows10-upgrade] "method": "backend_setOptions"
(24909) [6] [2022-02-11 09:06:58.551] [windows10-upgrade] SslLib should be: C:\Program Files (x86)\opsi.org\opsi-client-agent\opsi-script\ssleay32.dll
(24910) [6] [2022-02-11 09:06:58.566] [windows10-upgrade] JSON Bench for backend_setOptions "params":[{"addConfigStateDefaults":true}],"id":1} Start: 09:06:58:551 Time: 00:00:00:015
(24911) [6] [2022-02-11 09:06:58.566] [windows10-upgrade] JSON result:
(24912) [6] [2022-02-11 09:06:58.567] [windows10-upgrade]
(24913) [6] [2022-02-11 09:06:58.567] [windows10-upgrade] ~~~~~~~ Start Sub ~~~~~~~ Sub_Determine_Shutdown_Warning_Time
(24914) [6] [2022-02-11 09:06:58.609] [windows10-upgrade] Set $opsiServiceCallParameter$ = '{"configId":"opsiclientd.event_software_on_demand.shutdown_warning_time","objectId":"kmpc88.klm.local"}'
(24915) [6] [2022-02-11 09:06:58.609] [windows10-upgrade] The value of the variable "$opsiServiceCallParameter$" is now: "{"configId":"opsiclientd.event_software_on_demand.shutdown_warning_time","objectId":"kmpc88.klm.local"}"
(24916) [6] [2022-02-11 09:06:58.609] [windows10-upgrade] Set $ResultList$ = getReturnListFromSection("opsiServiceCall_configState_getObjects")
(24917) [5] [2022-02-11 09:06:58.610] [windows10-upgrade]
(24918) [6] [2022-02-11 09:06:58.610] [windows10-upgrade] "method": "configState_getObjects"
(24919) [6] [2022-02-11 09:06:58.611] [windows10-upgrade] SslLib should be: C:\Program Files (x86)\opsi.org\opsi-client-agent\opsi-script\ssleay32.dll
(24920) [6] [2022-02-11 09:06:58.656] [windows10-upgrade] JSON Bench for configState_getObjects "params":[[],{"configId":"opsiclientd.event_softwa Start: 09:06:58:610 Time: 00:00:00:046
(24921) [6] [2022-02-11 09:06:58.656] [windows10-upgrade] JSON result: []
(24922) [7] [2022-02-11 09:06:58.656] [windows10-upgrade] The value of the variable "$ResultList$" is now:
(24923) [7] [2022-02-11 09:06:58.656] [windows10-upgrade] (string 0)[]
(24924) [6] [2022-02-11 09:06:58.656] [windows10-upgrade] Set $opsiServiceCallParameter$ = ""
(24925) [6] [2022-02-11 09:06:58.660] [windows10-upgrade] The value of the variable "$opsiServiceCallParameter$" is now: ""
(24926) [6] [2022-02-11 09:06:58.660] [windows10-upgrade] Set $JsonStr$ = takeString(0, $ResultList$)
(24927) [6] [2022-02-11 09:06:58.660] [windows10-upgrade] The value of the variable "$JsonStr$" is now: "[]"
(24928) [6] [2022-02-11 09:06:58.660] [windows10-upgrade] Set $ResultList$ = emptylist($ResultList$)
(24929) [7] [2022-02-11 09:06:58.660] [windows10-upgrade] The value of the variable "$ResultList$" is now:
(24930) [6] [2022-02-11 09:06:58.661] [windows10-upgrade] If
(24931) [7] [2022-02-11 09:06:58.661] [windows10-upgrade] jsonIsValid($JsonStr$) <<< result true
(24932) [6] [2022-02-11 09:06:58.661] [windows10-upgrade] NOT (jsonIsValid($JsonStr$)) <<< result false
(24933) [6] [2022-02-11 09:06:58.661] [windows10-upgrade] Then
(24934) [6] [2022-02-11 09:06:58.661] [windows10-upgrade] Else
(24935) [6] [2022-02-11 09:06:58.661] [windows10-upgrade] If
(24936) [7] [2022-02-11 09:06:58.661] [windows10-upgrade] jsonIsArray($JsonStr$) <<< result true
(24937) [6] [2022-02-11 09:06:58.661] [windows10-upgrade] NOT (jsonIsArray($JsonStr$)) <<< result false
(24938) [6] [2022-02-11 09:06:58.661] [windows10-upgrade] Then
(24939) [6] [2022-02-11 09:06:58.661] [windows10-upgrade] Else
(24940) [6] [2022-02-11 09:06:58.661] [windows10-upgrade] Set $configStateObj$ = jsonAsArrayGetElementByIndex($JsonStr$, "0")
(24941) [6] [2022-02-11 09:06:58.661] [windows10-upgrade] The value of the variable "$configStateObj$" is now: ""
(24942) [6] [2022-02-11 09:06:58.662] [windows10-upgrade] If
(24943) [7] [2022-02-11 09:06:58.662] [windows10-upgrade] jsonIsObject($configStateObj$) <<< result false
(24944) [6] [2022-02-11 09:06:58.662] [windows10-upgrade] NOT (jsonIsObject($configStateObj$)) <<< result true
(24945) [6] [2022-02-11 09:06:58.662] [windows10-upgrade] Then
(24946) [3] [2022-02-11 09:06:58.662] [windows10-upgrade] Error: Received no json object from opsiServiceCall_configState_getObjects
(24947) [6] [2022-02-11 09:06:58.662] [windows10-upgrade] Else
(24948) [6] [2022-02-11 09:06:58.662] [windows10-upgrade] EndIf
(24949) [6] [2022-02-11 09:06:58.662] [windows10-upgrade] EndIf
(24950) [6] [2022-02-11 09:06:58.662] [windows10-upgrade] EndIf
(24951) [6] [2022-02-11 09:06:58.662] [windows10-upgrade]
(24952) [6] [2022-02-11 09:06:58.662] [windows10-upgrade] ~~~~~~~ End Sub ~~~~~~~ Sub_Determine_Shutdown_Warning_Time
(24953) [6] [2022-02-11 09:06:58.662] [windows10-upgrade]
(24954) [6] [2022-02-11 09:06:58.663] [windows10-upgrade] Set $ShutdownWarningTimeBackup$ = $Result$
(24955) [6] [2022-02-11 09:06:58.664] [windows10-upgrade] The value of the variable "$ShutdownWarningTimeBackup$" is now: ""
(24956) [6] [2022-02-11 09:06:58.664] [windows10-upgrade] Set $Result$ = ""
(24957) [6] [2022-02-11 09:06:58.665] [windows10-upgrade] The value of the variable "$Result$" is now: ""
(24958) [5] [2022-02-11 09:06:58.666] [windows10-upgrade] Execution of: Registry_Backup_Shutdown_Warning_Time /32bit
(24959) [5] [2022-02-11 09:06:58.666] [windows10-upgrade]
(24960) [7] [2022-02-11 09:06:58.666] [windows10-upgrade] Registry started with redirection (32 Bit)
(24961) [7] [2022-02-11 09:06:58.666] [windows10-upgrade] Key is: HKLM\SOFTWARE\opsi.org\winst\windows10-upgrade
(24962) [6] [2022-02-11 09:06:58.666] [windows10-upgrade] Registry key [HKLM\SOFTWARE\opsi.org\winst\windows10-upgrade] opened
(24963) [6] [2022-02-11 09:06:58.666] [windows10-upgrade] Variable "ShutdownWarningTimeBackup" set to ""
(24964) [6] [2022-02-11 09:06:58.666] [windows10-upgrade] Key closed
(24965) [5] [2022-02-11 09:06:58.666] [windows10-upgrade] comment: Setting the shutdown_warning_time to zero
(24966) [6] [2022-02-11 09:06:58.666] [windows10-upgrade] If
(24967) [3] [2022-02-11 09:06:58.668] [windows10-upgrade] Error: Exception at jsonAsObjectHasKey with : "","_isGeneratedDefault"
(24968) [6] [2022-02-11 09:06:58.668] [windows10-upgrade] jsonAsObjectHasKey($configStateObj$, "_isGeneratedDefault") <<< result false
(24969) [6] [2022-02-11 09:06:58.668] [windows10-upgrade] Then
(24970) [6] [2022-02-11 09:06:58.668] [windows10-upgrade] EndIf
(24971) [6] [2022-02-11 09:06:58.668] [windows10-upgrade] If
(24972) [3] [2022-02-11 09:06:58.668] [windows10-upgrade] Error: Exception at jsonAsObjectHasKey with : "","ident"
(24973) [6] [2022-02-11 09:06:58.668] [windows10-upgrade] jsonAsObjectHasKey($configStateObj$, "ident") <<< result false
(24974) [6] [2022-02-11 09:06:58.668] [windows10-upgrade] Then
(24975) [6] [2022-02-11 09:06:58.668] [windows10-upgrade] EndIf
(24976) [6] [2022-02-11 09:06:58.668] [windows10-upgrade] Set $configStateObj$ = jsonAsObjectSetValueByKey($configStateObj$, "values", '["0"]')
(24977) [3] [2022-02-11 09:06:58.669] [windows10-upgrade] Error: Exception at jsonAsObjectSetValueByKey with: "","values","["0"]"
(24978) [6] [2022-02-11 09:06:58.669] [windows10-upgrade] The value of the variable "$configStateObj$" is now: ""
(24979) [5] [2022-02-11 09:06:58.670] [windows10-upgrade] Execution of: OpsiServiceCall_Set_Shutdown_Warning_Time
(24980) [5] [2022-02-11 09:06:58.670] [windows10-upgrade]
(24981) [6] [2022-02-11 09:06:58.670] [windows10-upgrade] "method": "configState_insertObject"
(24982) [6] [2022-02-11 09:06:58.670] [windows10-upgrade] SslLib should be: C:\Program Files (x86)\opsi.org\opsi-client-agent\opsi-script\ssleay32.dll
(24983) [6] [2022-02-11 09:06:58.694] [windows10-upgrade] JSON Bench for configState_insertObject "params":[""],"id":1} Start: 09:06:58:670 Time: 00:00:00:024
(24984) [3] [2022-02-11 09:06:58.694] [windows10-upgrade] Error: retrieveJSONObject --- opsi service problem ----> {"message":"'' is not a <class 'opsicommon.objects.ConfigState'>","details":null,"class":"ValueError"}
(24985) [3] [2022-02-11 09:06:58.694] [windows10-upgrade] Received (first 512): {"id":1,"result":null,"error":{"message":"'' is not a <class 'opsicommon.objects.ConfigState'>","class":"ValueError","details":null}}
(24986) [3] [2022-02-11 09:06:58.694] [windows10-upgrade] Error: -> {"message":"'' is not a <class 'opsicommon.objects.ConfigState'>","details":null,"class":"ValueError"}
(24987) [5] [2022-02-11 09:06:58.694] [windows10-upgrade] comment: Testing if the shutdown_warning_time was set to zero
(24988) [6] [2022-02-11 09:06:58.695] [windows10-upgrade]
(24989) [6] [2022-02-11 09:06:58.695] [windows10-upgrade] ~~~~~~~ Start Sub ~~~~~~~ Sub_Determine_Shutdown_Warning_Time
(24990) [6] [2022-02-11 09:06:58.737] [windows10-upgrade] Set $opsiServiceCallParameter$ = '{"configId":"opsiclientd.event_software_on_demand.shutdown_warning_time","objectId":"kmpc88.klm.local"}'
(24991) [6] [2022-02-11 09:06:58.742] [windows10-upgrade] The value of the variable "$opsiServiceCallParameter$" is now: "{"configId":"opsiclientd.event_software_on_demand.shutdown_warning_time","objectId":"kmpc88.klm.local"}"
(24992) [6] [2022-02-11 09:06:58.742] [windows10-upgrade] Set $ResultList$ = getReturnListFromSection("opsiServiceCall_configState_getObjects")
(24993) [5] [2022-02-11 09:06:58.742] [windows10-upgrade]
(24994) [6] [2022-02-11 09:06:58.742] [windows10-upgrade] "method": "configState_getObjects"
(24995) [6] [2022-02-11 09:06:58.742] [windows10-upgrade] SslLib should be: C:\Program Files (x86)\opsi.org\opsi-client-agent\opsi-script\ssleay32.dll
(24996) [6] [2022-02-11 09:06:58.783] [windows10-upgrade] JSON Bench for configState_getObjects "params":[[],{"configId":"opsiclientd.event_softwa Start: 09:06:58:742 Time: 00:00:00:041
(24997) [6] [2022-02-11 09:06:58.783] [windows10-upgrade] JSON result: []
(24998) [7] [2022-02-11 09:06:58.783] [windows10-upgrade] The value of the variable "$ResultList$" is now:
(24999) [7] [2022-02-11 09:06:58.783] [windows10-upgrade] (string 0)[]
(25000) [6] [2022-02-11 09:06:58.783] [windows10-upgrade] Set $opsiServiceCallParameter$ = ""
(25001) [6] [2022-02-11 09:06:58.783] [windows10-upgrade] The value of the variable "$opsiServiceCallParameter$" is now: ""
(25002) [6] [2022-02-11 09:06:58.783] [windows10-upgrade] Set $JsonStr$ = takeString(0, $ResultList$)
(25003) [6] [2022-02-11 09:06:58.783] [windows10-upgrade] The value of the variable "$JsonStr$" is now: "[]"
(25004) [6] [2022-02-11 09:06:58.784] [windows10-upgrade] Set $ResultList$ = emptylist($ResultList$)
(25005) [7] [2022-02-11 09:06:58.784] [windows10-upgrade] The value of the variable "$ResultList$" is now:
(25006) [6] [2022-02-11 09:06:58.784] [windows10-upgrade] If
(25007) [7] [2022-02-11 09:06:58.784] [windows10-upgrade] jsonIsValid($JsonStr$) <<< result true
(25008) [6] [2022-02-11 09:06:58.784] [windows10-upgrade] NOT (jsonIsValid($JsonStr$)) <<< result false
(25009) [6] [2022-02-11 09:06:58.784] [windows10-upgrade] Then
(25010) [6] [2022-02-11 09:06:58.784] [windows10-upgrade] Else
(25011) [6] [2022-02-11 09:06:58.784] [windows10-upgrade] If
(25012) [7] [2022-02-11 09:06:58.784] [windows10-upgrade] jsonIsArray($JsonStr$) <<< result true
(25013) [6] [2022-02-11 09:06:58.784] [windows10-upgrade] NOT (jsonIsArray($JsonStr$)) <<< result false
(25014) [6] [2022-02-11 09:06:58.784] [windows10-upgrade] Then
(25015) [6] [2022-02-11 09:06:58.784] [windows10-upgrade] Else
(25016) [6] [2022-02-11 09:06:58.784] [windows10-upgrade] Set $configStateObj$ = jsonAsArrayGetElementByIndex($JsonStr$, "0")
(25017) [6] [2022-02-11 09:06:58.785] [windows10-upgrade] The value of the variable "$configStateObj$" is now: ""
(25018) [6] [2022-02-11 09:06:58.785] [windows10-upgrade] If
(25019) [7] [2022-02-11 09:06:58.785] [windows10-upgrade] jsonIsObject($configStateObj$) <<< result false
(25020) [6] [2022-02-11 09:06:58.785] [windows10-upgrade] NOT (jsonIsObject($configStateObj$)) <<< result true
(25021) [6] [2022-02-11 09:06:58.785] [windows10-upgrade] Then
(25022) [3] [2022-02-11 09:06:58.785] [windows10-upgrade] Error: Received no json object from opsiServiceCall_configState_getObjects
(25023) [6] [2022-02-11 09:06:58.785] [windows10-upgrade] Else
(25024) [6] [2022-02-11 09:06:58.785] [windows10-upgrade] EndIf
(25025) [6] [2022-02-11 09:06:58.785] [windows10-upgrade] EndIf
(25026) [6] [2022-02-11 09:06:58.785] [windows10-upgrade] EndIf
(25027) [6] [2022-02-11 09:06:58.785] [windows10-upgrade]
(25028) [6] [2022-02-11 09:06:58.785] [windows10-upgrade] ~~~~~~~ End Sub ~~~~~~~ Sub_Determine_Shutdown_Warning_Time
(25029) [6] [2022-02-11 09:06:58.785] [windows10-upgrade]
(25030) [6] [2022-02-11 09:06:58.786] [windows10-upgrade] Set $ShutdownWarningTime$ = $Result$
(25031) [6] [2022-02-11 09:06:58.787] [windows10-upgrade] The value of the variable "$ShutdownWarningTime$" is now: ""
(25032) [6] [2022-02-11 09:06:58.788] [windows10-upgrade] Set $Result$ = ""
(25033) [6] [2022-02-11 09:06:58.788] [windows10-upgrade] The value of the variable "$Result$" is now: ""
(25034) [6] [2022-02-11 09:06:58.788] [windows10-upgrade] If
(25035) [6] [2022-02-11 09:06:58.788] [windows10-upgrade] $ShutdownWarningTime$ = "0" <<< result false
(25036) [6] [2022-02-11 09:06:58.788] [windows10-upgrade] Then
(25037) [6] [2022-02-11 09:06:58.788] [windows10-upgrade] Else
(25038) [3] [2022-02-11 09:06:58.789] [windows10-upgrade] Error: Failed to set the shutdown_warning_time to zero
(25039) [6] [2022-02-11 09:06:58.789] [windows10-upgrade] EndIf
- SisterOfMercy
- Beiträge: 1523
- Registriert: 22 Jun 2012, 19:18
Re: Windows 10 Upgrade - Error
What os packages and opsi packages do you have installed?
Bitte schreiben Sie Deutsch, when I'm responding in the German-speaking part of the forum!
Re: Windows 10 Upgrade - Error
Actually nothing, except for the opsi-client-agent
We have a Domain with about 100 Computers, but I've tried the update on a "local" naked Win10-Computer - so no Group Policies take effect.
It just seems like it doesnt get the ShutDownWarning_Time to 0, but im still questioning - WHY??!
I've deactivated a few Messages which show up when the Update starts.. for example the "User Control Message" which says "a Restart is needed".
But this wasnt the solution - What could be the problem here?....
We have a Domain with about 100 Computers, but I've tried the update on a "local" naked Win10-Computer - so no Group Policies take effect.
It just seems like it doesnt get the ShutDownWarning_Time to 0, but im still questioning - WHY??!
I've deactivated a few Messages which show up when the Update starts.. for example the "User Control Message" which says "a Restart is needed".
But this wasnt the solution - What could be the problem here?....
- SisterOfMercy
- Beiträge: 1523
- Registriert: 22 Jun 2012, 19:18
Re: Windows 10 Upgrade - Error
Uhmm? What is the output of: opsi-package-manager -l
And with the os packages I meant the packages from opsi that were installed with the package manager of the os, such as apt or yum.
Bitte schreiben Sie Deutsch, when I'm responding in the German-speaking part of the forum!
Re: Windows 10 Upgrade - Error
Good Morning,
Here is the output from that command:
roduct ID Version Name
===========================================================================
activate-win 1.0-9 Windows Activati
alma8 4.2.0.2-5 Alma Linux 8 64B
centos70 4.2.0.2-5 CentOS Linux 7 6
centos8 4.2.0.2-5 CentOS Linux 8 6
config-win-base 4.0.1-1 Windows Customiz
config-win10 4.1.2-2 Configure Window
config-win81-desktop 4.0.5-3 Windows Customiz
debian 4.2.0.2-1 Linux Debian 32
debian10 4.2.0.1-6 Linux Debian 10
debian11 4.2.0.1-6 Linux Debian 11
debian9 4.2.0.1-6 Linux Debian 9
hwaudit 4.2.0.0-1 Client Hardwarei
hwinvent 4.1.0.1-3 Hardware Inventa
jedit 5.5.0-6 jEdit programmer
l-debuntu-upgrade 4.2.0.0-4 Debian / Ubuntu
l-desktop 4.2.0.1-1 Desktop for Linu
l-opsi-client-kiosk 4.1.1.11-3 l-opsi-client-ki
l-opsi-server 4.2.0.5-2 Installs opsi
l-opsi-server-migrate 4.2.3-8 Migrate to opsi
l-opsi-server-register-depot 4.1.0.2-2 Register opsi se
l-os-postinst 4.0.5.1-4 Linux post booti
l-ssh-root-login 1.0-3 l-ssh-root-login
l-system-update 4.1.0.0-5 Linux System Upd
l-virtualbox 5.1-1 l-virtualbox
memtest86 5.01-2 Memtest86+
mint20-1 4.2.0.1-4 Linux Mint 20-1
mint20-2 4.2.0.1-4 Linux Mint 20-2
networklocation 4.2.0.0-1 networklocation
opensusel15 4.1.0.1-1 OpenSuse Leap 15
opensusel15-1 4.1.0.3-2 OpenSuse Leap 15
opensusel15-2 4.2.0.1-6 OpenSuse Leap 15
opensusel15-3 4.2.0.1-6 OpenSuse Leap 15
opsi-auto-update 4.2.0.1-1 opsi-auto-update
opsi-client-agent 4.2.0.20-2 opsi.org client
opsi-client-kiosk 4.1.1.11-10 Opsi Client Kios
opsi-clonezilla 4.2.0.0-1 Clonezilla over
opsi-configed 4.1.9.11.1-1 opsi configed
opsi-linux-client-agent 4.2.0.14-1 opsi.org client
opsi-logviewer 3.1-9 opsi logfile vie
opsi-script 4.12.4.35-7 script
opsi-script-beautifier 4.2.0.2-1 opsi-script-beau
opsi-script-test 4.12.4.31-1 opsi-script test
opsi-setup-detector 4.2.0.8-2 opsi-setup-detec
opsi-template 4.0.6-1 opsi template pr
opsi-template-with-admin 4.1.0.0-4 opsi template fo
opsi-template-with-userlogin 4.1.1.3-1 opsi template fo
opsi-uefi-netboot 4.2.0.0-1 opsi-uefi-netboo
opsi-wan-config-off 4.1.0-1 opsi-wan-config-
opsi-wan-config-on 4.1.0-1 opsi-wan-config-
opsi-wim-capture 4.2.0.1-8 opsi-wim-capture
opsi-wim-delete 4.1.0.1-1 opsi-wim-delete
opsi-wim-info 4.0.7.2-1 opsi-wim-info
opsi-winpe 4.1.0-1 WinPE patching t
opsi-winst 4.12.4.35-7 winst
opsipackagebuilder_wlm 8.4.5-3 opsiPackageBuild
redhat70 4.2.0.2-5 RedHat Enterpris
redhat8 4.2.0.2-5 RedHat Enterpris
rocky8 4.2.0.2-5 Rocky Linux 8 64
shutdownwanted 1.0-8 shutdown wanted
sles12 4.2.0.1-2 SuSE Linux Enter
sles12sp1 4.2.0.1-3 SuSE Linux Enter
sles12sp2 4.2.0.1-3 SuSE Linux Enter
sles12sp3 4.2.0.1-6 SuSE Linux Enter
sles12sp4 4.2.0.1-6 SuSE Linux Enter
sles12sp5 4.2.0.1-6 SuSE Linux Enter
sles15-1 4.2.0.1-6 SuSE Linux Enter
sles15-2 4.2.0.1-6 SuSE Linux Enter
sles15-3 4.2.0.1-6 SuSE Linux Enter
swaudit 4.2.0.0-1 Client Software
ubuntu 4.2.0.2-1 Linux Ubuntu 32
ubuntu18-04 4.2.0.1-7 Linux Ubuntu 18-
ubuntu20-04 4.2.0.1-7 Linux Ubuntu 20-
ucs44 4.2.0.1-5 Univention Corpo
win10 4.2.0.1-7 Windows 10
win10-captured 4.2.0.1-7 Windows 10
win10-sysprep-app-update-blocker 4.2.0.0-1 win10-sysprep-ap
win10-x64 4.2.0.1-7 Windows 10 x64
win10-x64-captured 4.2.0.1-7 Windows 10 x64
win11-x64 4.2.0.1-7 Windows 11 x64
win11-x64-captured 4.2.0.1-7 Windows 11 x64
win2008-r2 4.2.0.1-7 Windows Server 2
win2012 4.2.0.1-7 Windows Server 2
win2012-r2 4.2.0.1-7 Windows Server 2
win2016 4.2.0.1-7 Windows Server 2
win2019 4.2.0.1-7 Windows Server 2
win2022 4.2.0.1-7 Windows Server 2
win7 4.2.0.1-7 Windows 7 - x86
win7-captured 4.2.0.1-7 Windows 7 - x86
win7-x64 4.2.0.1-7 Windows 7 - x64
win7-x64-captured 4.2.0.1-7 Windows 7 - x64
win81 4.2.0.1-7 Windows
win81-captured 4.2.0.1-7 Windows
win81-x64 4.2.0.1-7 Windows
win81-x64-captured 4.2.0.1-7 Windows
windomain 2.1-1 Join NT/AD Domai
windows10-upgrade 21h1-1 Windows 10 Upgra
wipedisk 2.2-1 Festplatte oder
I've Installed all that packages by: opsi-package-updater -v install or smth like that
Maybe its not an real opsi-problem? Maybe Windows is blocking something? But I've tested it on a default naked Win10-Image so it doesnt make sense to me......why is it working for everybody else then?
Would it be a better solution to reinstall opsi and ubuntu?..
Here is the output from that command:
roduct ID Version Name
===========================================================================
activate-win 1.0-9 Windows Activati
alma8 4.2.0.2-5 Alma Linux 8 64B
centos70 4.2.0.2-5 CentOS Linux 7 6
centos8 4.2.0.2-5 CentOS Linux 8 6
config-win-base 4.0.1-1 Windows Customiz
config-win10 4.1.2-2 Configure Window
config-win81-desktop 4.0.5-3 Windows Customiz
debian 4.2.0.2-1 Linux Debian 32
debian10 4.2.0.1-6 Linux Debian 10
debian11 4.2.0.1-6 Linux Debian 11
debian9 4.2.0.1-6 Linux Debian 9
hwaudit 4.2.0.0-1 Client Hardwarei
hwinvent 4.1.0.1-3 Hardware Inventa
jedit 5.5.0-6 jEdit programmer
l-debuntu-upgrade 4.2.0.0-4 Debian / Ubuntu
l-desktop 4.2.0.1-1 Desktop for Linu
l-opsi-client-kiosk 4.1.1.11-3 l-opsi-client-ki
l-opsi-server 4.2.0.5-2 Installs opsi
l-opsi-server-migrate 4.2.3-8 Migrate to opsi
l-opsi-server-register-depot 4.1.0.2-2 Register opsi se
l-os-postinst 4.0.5.1-4 Linux post booti
l-ssh-root-login 1.0-3 l-ssh-root-login
l-system-update 4.1.0.0-5 Linux System Upd
l-virtualbox 5.1-1 l-virtualbox
memtest86 5.01-2 Memtest86+
mint20-1 4.2.0.1-4 Linux Mint 20-1
mint20-2 4.2.0.1-4 Linux Mint 20-2
networklocation 4.2.0.0-1 networklocation
opensusel15 4.1.0.1-1 OpenSuse Leap 15
opensusel15-1 4.1.0.3-2 OpenSuse Leap 15
opensusel15-2 4.2.0.1-6 OpenSuse Leap 15
opensusel15-3 4.2.0.1-6 OpenSuse Leap 15
opsi-auto-update 4.2.0.1-1 opsi-auto-update
opsi-client-agent 4.2.0.20-2 opsi.org client
opsi-client-kiosk 4.1.1.11-10 Opsi Client Kios
opsi-clonezilla 4.2.0.0-1 Clonezilla over
opsi-configed 4.1.9.11.1-1 opsi configed
opsi-linux-client-agent 4.2.0.14-1 opsi.org client
opsi-logviewer 3.1-9 opsi logfile vie
opsi-script 4.12.4.35-7 script
opsi-script-beautifier 4.2.0.2-1 opsi-script-beau
opsi-script-test 4.12.4.31-1 opsi-script test
opsi-setup-detector 4.2.0.8-2 opsi-setup-detec
opsi-template 4.0.6-1 opsi template pr
opsi-template-with-admin 4.1.0.0-4 opsi template fo
opsi-template-with-userlogin 4.1.1.3-1 opsi template fo
opsi-uefi-netboot 4.2.0.0-1 opsi-uefi-netboo
opsi-wan-config-off 4.1.0-1 opsi-wan-config-
opsi-wan-config-on 4.1.0-1 opsi-wan-config-
opsi-wim-capture 4.2.0.1-8 opsi-wim-capture
opsi-wim-delete 4.1.0.1-1 opsi-wim-delete
opsi-wim-info 4.0.7.2-1 opsi-wim-info
opsi-winpe 4.1.0-1 WinPE patching t
opsi-winst 4.12.4.35-7 winst
opsipackagebuilder_wlm 8.4.5-3 opsiPackageBuild
redhat70 4.2.0.2-5 RedHat Enterpris
redhat8 4.2.0.2-5 RedHat Enterpris
rocky8 4.2.0.2-5 Rocky Linux 8 64
shutdownwanted 1.0-8 shutdown wanted
sles12 4.2.0.1-2 SuSE Linux Enter
sles12sp1 4.2.0.1-3 SuSE Linux Enter
sles12sp2 4.2.0.1-3 SuSE Linux Enter
sles12sp3 4.2.0.1-6 SuSE Linux Enter
sles12sp4 4.2.0.1-6 SuSE Linux Enter
sles12sp5 4.2.0.1-6 SuSE Linux Enter
sles15-1 4.2.0.1-6 SuSE Linux Enter
sles15-2 4.2.0.1-6 SuSE Linux Enter
sles15-3 4.2.0.1-6 SuSE Linux Enter
swaudit 4.2.0.0-1 Client Software
ubuntu 4.2.0.2-1 Linux Ubuntu 32
ubuntu18-04 4.2.0.1-7 Linux Ubuntu 18-
ubuntu20-04 4.2.0.1-7 Linux Ubuntu 20-
ucs44 4.2.0.1-5 Univention Corpo
win10 4.2.0.1-7 Windows 10
win10-captured 4.2.0.1-7 Windows 10
win10-sysprep-app-update-blocker 4.2.0.0-1 win10-sysprep-ap
win10-x64 4.2.0.1-7 Windows 10 x64
win10-x64-captured 4.2.0.1-7 Windows 10 x64
win11-x64 4.2.0.1-7 Windows 11 x64
win11-x64-captured 4.2.0.1-7 Windows 11 x64
win2008-r2 4.2.0.1-7 Windows Server 2
win2012 4.2.0.1-7 Windows Server 2
win2012-r2 4.2.0.1-7 Windows Server 2
win2016 4.2.0.1-7 Windows Server 2
win2019 4.2.0.1-7 Windows Server 2
win2022 4.2.0.1-7 Windows Server 2
win7 4.2.0.1-7 Windows 7 - x86
win7-captured 4.2.0.1-7 Windows 7 - x86
win7-x64 4.2.0.1-7 Windows 7 - x64
win7-x64-captured 4.2.0.1-7 Windows 7 - x64
win81 4.2.0.1-7 Windows
win81-captured 4.2.0.1-7 Windows
win81-x64 4.2.0.1-7 Windows
win81-x64-captured 4.2.0.1-7 Windows
windomain 2.1-1 Join NT/AD Domai
windows10-upgrade 21h1-1 Windows 10 Upgra
wipedisk 2.2-1 Festplatte oder
I've Installed all that packages by: opsi-package-updater -v install or smth like that
Maybe its not an real opsi-problem? Maybe Windows is blocking something? But I've tested it on a default naked Win10-Image so it doesnt make sense to me......why is it working for everybody else then?
Would it be a better solution to reinstall opsi and ubuntu?..
- SisterOfMercy
- Beiträge: 1523
- Registriert: 22 Jun 2012, 19:18
Re: Windows 10 Upgrade - Error
Oh, good, so you do have other packages such as opsi-script available.
Uhm, as this is not the version from experimental, how did you try that one then?
No, definitely not.
Bitte schreiben Sie Deutsch, when I'm responding in the German-speaking part of the forum!