Hi,
I can't install Windows on a new laptop Dell Precision 7730 with a M.2 PCIe NVMe SSD Disk.
The error message is "no harddisk found".
What can I do ?
Best regards.
[resolved] SSD disk M.2 PCIe NVMe not found
[resolved] SSD disk M.2 PCIe NVMe not found
Zuletzt geändert von bourhis am 13 Nov 2019, 10:18, insgesamt 1-mal geändert.
Re: SSD disk M.2 PCIe NVMe not found
When do you get this error? During OPSI-Bootimage or when WinPE is already running?
Kein Support per DM!
_________________________
opsi support - https://www.uib.de/
For productive opsi installations we recommend support contracts.
_________________________
opsi support - https://www.uib.de/
For productive opsi installations we recommend support contracts.
Re: SSD disk M.2 PCIe NVMe not found
During OPSI Boot Image
Re: SSD disk M.2 PCIe NVMe not found
Well Dells are sometimes very special.
Check of Intel VMD is deactivated, also the checkboxes of VMD devices.
SATA mode should bei AHCI.
Also check in Uefi: general Options -> advanced boot options -> Attempt legacy boot.
Regards
Mathias
Check of Intel VMD is deactivated, also the checkboxes of VMD devices.
SATA mode should bei AHCI.
Also check in Uefi: general Options -> advanced boot options -> Attempt legacy boot.
Regards
Mathias
Kein Support per DM!
_________________________
opsi support - http://www.uib.de/
For productive opsi installations we recommend support contracts.
_________________________
opsi support - http://www.uib.de/
For productive opsi installations we recommend support contracts.
Re: SSD disk M.2 PCIe NVMe not found
That's works !
Thanks.
Thanks.
Re: [resolved] SSD disk M.2 PCIe NVMe not found
Hi
which point exactly did work?
Regards
which point exactly did work?
Regards
Kein Support per DM!
_________________________
opsi support - http://www.uib.de/
For productive opsi installations we recommend support contracts.
_________________________
opsi support - http://www.uib.de/
For productive opsi installations we recommend support contracts.
Re: [resolved] SSD disk M.2 PCIe NVMe not found
The Opsi-boot-image find the disk after the Bios adjustements : "AHCI mode" and "Attempt legacy boot"
Then, the entire installation process was completed normally.
Then, the entire installation process was completed normally.