Ich habe da ein Problem mit ExitWindows /Reboot
Ich arbeite über
Template for Installations as temporary local admin
und da soll man ja ein ExitWindows /Reboot am Ende des Skriptes einbauen.
Es kommt aber folgende Fehlermeldung.
ExitWindows konnte nicht gefunden werden.
/opt/pcbin/install/aviradefree/local_avira9.ins
Code: Alles auswählen
[Initial]
Message=installiere Produkt avira 9 DE Free
LogLevel=2
ExitOnError=false
ScriptErrorMessages=on
TraceMode=off
[Aktionen]
WinBatch_avira_installieren
[WinBatch_avira_installieren]
;DosBatch_avira
;[DosBatch_avira]
%SCRIPTPATH%\autoit3.exe %SCRIPTPATH%\install.au3
ExitWindows /Reboot
Code: Alles auswählen
; Copyright (c) uib umwelt informatik buero gmbh (www.uib.de)
; This sourcecode is owned by uib
; and published under the Terms of the General Public License.
; TEMPLATE for
; Skript fuer Installationen im Kontext eines temporaeren lokalen Administrators
; installations as temporary local admin
; see Winst_handbuch / Kochbuch
; !!! requires winst32.exe version 4.2.x !!!
; !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
; Vorarbeiten/Voraussetzungen/Doku pruefen wie in Winsthandbuch
; 8.3 Skript fuer Installationen im Kontext eines lokalen Administrators
; !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
[Initial]
LogLevel=2
ExitOnError=false
ScriptErrorMessages=on
TraceMode=off
[Aktionen]
DefVar $ProductName$
Set $ProductName$ = "avira9"
DefVar $ProductSizeMB$
Set $ProductSizeMB$ = "100"
DefVar $LocalSetupScript$
Set $LocalSetupScript$ = "local_"+$ProductName$+".ins /batch"
DefVar $LockKeyboard$
; set $LockKeyboard$ to "true" to prevent user hacks while admin is logged in
;Set $LockKeyboard$="true"
; Set PasswdLogLevel to -2 to prevent passwords to logged included in opsi 2.5 / winst32.exe version 4.2.x !!!
;
DefVar $PasswdLogLevel$
Set $PasswdLogLevel$="-2"
DefVar $OpsiAdminPass$
DefStringlist $outlist$
; some variables for the sub sections
DefVar $SYSTEMROOT$
DefVar $SYSTEMDRIVE$
DefVar $ScriptPath$
DefVar $ProgramFilesDir$
DefVar $HOST$
DefVar $AppDataDir$
Set $SYSTEMDRIVE$ = "%SYSTEMDRIVE%"
Set $SYSTEMROOT$ = "%SYSTEMROOT%"
set $ScriptPath$="%ScriptPath%"
set $ProgramFilesDir$="%ProgramFilesDir%"
set $Host$="%Host%"
set $AppDataDir$="%AppDataDir%"
; temp is always useful
DefVar $TEMP$
Set $TEMP$= EnvVar("TEMP")
DefVar $Tmp$
set $Tmp$ = EnvVar("TMP")
;Variables for version of the operating system (OS)-Test
DefVar $OS$
DefVar $MinorOS$
set $OS$ = GetOS
set $MinorOS$ = GetNTVersion
DefVar $RebootFlag$
DefVar $WinstRegKey$
DefVar $RebootRegVar$
DefVar $AutoName$
DefVar $AutoPass$
DefVar $AutoDom$
DefVar $AutoLogon$
DefVar $AutoBackupKey$
DefVar $LocalFilesPath$
DefVar $LocalWinst$
Set $WinstRegKey$ = "HKLM\SOFTWARE\opsi.org\winst"
Set $RebootFlag$ = GetRegistryStringValue("["+$WinstRegKey$+"] "+"RebootFlag")
Set $AutoBackupKey$ = $WinstRegKey$+"\AutoLogonBackup"
Set $LocalFilesPath$ = "C:\opsi_local_inst"
Set $LocalWinst$ = "c:\opsi\utils\winst32.exe"
if not( FileExists($LocalWinst$) )
Set $LocalWinst$ = "%ProgramFilesDir%\opsi.org\preloginloader\utils\winst32.exe"
endif
if ($OS$ = "Windows_NT" AND not ($MinorOS$="NT4"))
if not (($RebootFlag$ = "1") or ($RebootFlag$ = "2"))
;=========================
; Anweisungen vor Reboot
if not(HasMinimumSpace ("%SYSTEMDRIVE%", ""+$ProductSizeMB$+" MB"))
LogError "Nicht genügend Platz auf C: . "+$ProductSizeMB$+" MB auf C: für "+$ProductName$+" erforderlich."
else
; show product picture
ShowBitmap /3 "%scriptpath%\localsetup\"+$ProductName$+".bmp" $ProductName$
Message "Preparing "+$ProductName$+" install ..."
sub_Prepare_AutoLogon
; we need to reboot now to be sure that the autologon work
; Reboot initialisieren ...
Set $RebootFlag$ = "1"
Registry_SaveRebootFlag
ExitWindows /ImmediateReboot
endif ; genuegend platz
endif ; Rebootflag = not (1 or 2)
if ($RebootFlag$ = "1")
;=========================
; Anweisungen nach Reboot
; Rebootflag weitersetzen
Set $RebootFlag$ = "2"
Registry_SaveRebootFlag
; die eigentlichen Anweisungen
Message "Preparing "+$ProductName$+" install ..."
Registry_enable_keyboard
ExitWindows /ImmediateLogout
; now let the autologon work
; it will stop with a reboot
endif ; Rebootflag = 1
if ($RebootFlag$ = "2")
;=========================
; statements after second reboot
Set $RebootFlag$ = "0"
Registry_SaveRebootFlag
; This part must be here even if nothing is done
; possibly we do some cleanup
Message "Cleanup "+$ProductName$+" install ..."
sub_Restore_AutoLogon
; This is the clean end of the installation
endif ; Rebootflag = 2
endif
[sub_Prepare_AutoLogon]
; copy the setup script and files
Files_copy_Setup_files_local
; read actual Autologon values for backup
set $AutoName$ = GetRegistryStringValue ("[HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon] DefaultUserName")
; if AutoLogonName is our setup admin user, something bad happend
; then let us cleanup
if ($AutoName$="opsiSetupAdmin")
set $AutoName$=""
set $AutoPass$=""
set $AutoDom$=""
set $AutoLogon$="0"
else
set $AutoPass$ = GetRegistryStringValue ("[HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon] DefaultPassword")
set $AutoDom$ = GetRegistryStringValue ("[HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon] DefaultDomainName")
set $AutoLogon$ = GetRegistryStringValue ("[HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon] AutoAdminLogon")
endif
; backup AutoLogon values
Registry_save_autologon
; prepare the admin AutoLogon
;LogLevel="$PasswdLogLevel$"
LogLevel=-2
;
; !!! randomstr included in opsi 2.5 winst32.exe 4.2.x !!!
;
set $OpsiAdminPass$= randomstr
Registry_autologon
; create our setup admin user
DosInAnIcon_makeadmin
LogLevel=2
; remove c:\tmp\winst.bat with password
Files_remove_winst_bat
; store our setup script as run once
Registry_runOnce
; disable keyboard and mouse while the autologin admin works
if ($LockKeyboard$="true")
Registry_disable_keyboard
endif
[sub_Restore_AutoLogon]
; read AutoLogon values from backup
set $AutoName$ = GetRegistryStringValue("["+$AutoBackupKey$+"] DefaultUserName")
set $AutoPass$ = GetRegistryStringValue("["+$AutoBackupKey$+"] DefaultPassword")
set $AutoDom$= GetRegistryStringValue("["+$AutoBackupKey$+"] DefaultDomainName")
set $AutoLogon$= GetRegistryStringValue("["+$AutoBackupKey$+"] AutoAdminLogon")
; restore the values
;LogLevel="$PasswdLogLevel$"
LogLevel=-2
Registry_restore_autologon
LogLevel=2
; delete our setup admin user
DosInAnIcon_deleteadmin
; cleanup setup script, files and profiledir
Files_delete_Setup_files_local
; delete profiledir
DosInAnIcon_deleteprofile
[Registry_save_autologon]
openkey [$AutoBackupKey$]
set "DefaultUserName"="$AutoName$"
set "DefaultPassword"="$AutoPass$"
set "DefaultDomainName"="$AutoDom$"
set "AutoAdminLogon"="$AutoLogon$"
[Registry_restore_autologon]
openkey [HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon]
set "DefaultUserName"="$AutoName$"
set "DefaultPassword"="$AutoPass$"
set "DefaultDomainName"="$AutoDom$"
set "AutoAdminLogon"="$AutoLogon$"
[DosInAnIcon_deleteadmin]
NET USER opsiSetupAdmin /DELETE
[Registry_SaveRebootFlag]
openKey [$WinstRegKey$]
set "RebootFlag" = "$RebootFlag$"
[Files_copy_Setup_files_local]
copy -s %ScriptPath%\localsetup\*.* $LocalFilesPath$
[Files_delete_Setup_files_local]
delete -sf $LocalFilesPath$
; folgender Befehl funktioniert nicht vollständig, deshalb ist er zur Zeit auskommentier
; der Befehl wird durch die Sektion "DosInAnIcon_deleteprofile" ersetzt (P.Ohler)
;delete -sf "%ProfileDir%\opsiSetupAdmin"
[DosInAnIcon_deleteprofile]
rmdir /S /Q "%ProfileDir%\opsiSetupAdmin"
[DosInAnIcon_makeadmin]
NET USER opsiSetupAdmin $OpsiAdminPass$ /ADD
NET LOCALGROUP Administratoren /ADD opsiSetupAdmin
[Registry_autologon]
openkey [HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon]
set "DefaultUserName"="opsiSetupAdmin"
set "DefaultPassword"="$OpsiAdminPass$"
set "DefaultDomainName"="localhost"
set "AutoAdminLogon"="1"
[Registry_runonce]
openkey [HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\RunOnce]
set "opsi_autologon_setup"="$LocalWinst$ $LocalFilesPath$\$LocalSetupScript$"
[Registry_disable_keyboard]
openkey [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Kbdclass]
; disable
set "Start"=REG_DWORD:0x4
;enable
;set "Start"=REG_DWORD:0x1
openkey [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Mouclass]
; disable
set "Start"=REG_DWORD:0x4
;enable
;set "Start"=REG_DWORD:0x1
[Registry_enable_keyboard]
openkey [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Kbdclass]
; disable
;set "Start"=REG_DWORD:0x4
;enable
set "Start"=REG_DWORD:0x1
openkey [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Mouclass]
; disable
;set "Start"=REG_DWORD:0x4
;enable
set "Start"=REG_DWORD:0x1
[Files_remove_winst_bat]
delete -f c:\tmp\_winst.bat
