Windows 7 Installation

[thomaszwei]

Hallo Community,

ich habe mir gerade das Opsi Paket für Windows 7 gezogen und installiert. Nun sollte ich bestimmte Ordner mit meiner Windows 7 Version befüllen, sodass ich die Installation starten kann.
Kann mir bitte jemand sagen welcher Ordner von einer Windows 7 DVD in welchen Ordner am opsi server gehört?

Danke im Voraus
lg Thomas

[j.schneider]

Hallo,

bitte das Installationshandbuch http://download.uib.de/opsi3.4/doku/ops ... v34-de.pdf ab Seite 31 lesen.

Gruß
Jan Schneider

[Foppel]

Ich habe mich auch mal mit Win7 versucht. Bei mir scheint der Bootsector irgendwie nicht richtig zu funktionieren. Interessant für mich wäre ob es möglich ist Windows XP und Windows7 auswählen zu können bzw. welche Pakete müssen beim Opsi Server installiert werden, damit der neue Preloginloader funktioniert...

[d.oertel]

Hallo,

wie Jan Schneider schon sagte.......

Hallo,

bitte das Installationshandbuch http://download.uib.de/opsi3.4/doku/ops ... v34-de.pdf ab Seite 31 lesen.

Gruß
Jan Schneider

Wenn dann noch Unklarheiten sind - etwas detaillierter Fragen.

gruss
detlef oertel

[Foppel]

Danke für die Rückmeldung. Die Anleitung habe ich natürlich gelesen und alles hat soweit auch geklappt mit dem Anpassen der boot.wim usw. Ich verwende eine 64Bit Windows 7 Version, die aktuelle von MS...

Die angepasste boot.wim liegt bei mir hier: /opt/pcbin/install/win7/winpe/sources/boot.wim

ich hoffe das ist richtig?

Der zu installierende Rechner startet das OPSI-Bootimage partitioniert und kopiert die Daten, im Log stehen keine Fehler. Nur wenn der Rechner dann neu startet erhalte ich direkt beim Booten von der Festplatte die Meldung: Datenträger entfernen Neustart: Taste drücken

Da ich mal davon ausging das der Bootsector nicht kopiert wurde habe ich diesen mit der Win7 DVD versucht wiederherzustellen, was aber auch nicht klappte. Im Log steht aber das OPSI den Vista Bootsector installiert hat...

Code: Alles auswählen

[6] [Jul 03 11:13:35] Partition sector values =>>> number: 1, start: 6 sec, end: 28672319 sec, size: 28672314 sec  (Posix.py|1342)
[6] [Jul 03 11:13:35] Partition sector values =>>> number: 2, start: 28672320 sec, end: 36864959 sec, size: 8192640 sec  (Posix.py|1342)
[5] [Jul 03 11:13:35] Writing master boot record on '/dev/sda' (system: vista). (Posix.py|1556)
[6] [Jul 03 11:13:35] Command 'ms-sys' found: '/usr/local/bin/ms-sys' (Posix.py|100)
[6] [Jul 03 11:13:35] Executing: /usr/local/bin/ms-sys --mbrnt60 /dev/sda (Posix.py|1563)
[6] [Jul 03 11:13:35]  ->>> Windows Vista master boot record successfully written to /dev/sda (Posix.py|155)
[6] [Jul 03 11:13:35] Exit code: 0 (Posix.py|198)
[5] [Jul 03 11:13:35] Writing partition boot record on '/dev/sda2' (fs-type: fat32nt60). (Posix.py|1577)
[6] [Jul 03 11:13:35] Executing: /usr/local/bin/ms-sys -p --fat32nt60 /dev/sda2 (Posix.py|1588)
[6] [Jul 03 11:13:35]  ->>> Start sector (nr of hidden sectors) successfully written to /dev/sda2 (Posix.py|155)
[6] [Jul 03 11:13:35]  ->>> Physical disk drive id 0x80 (C:) successfully written to /dev/sda2 (Posix.py|155)
[6] [Jul 03 11:13:35]  ->>> Number of heads successfully written to /dev/sda2 (Posix.py|155)
[6] [Jul 03 11:13:35]  ->>> FAT32 NT60 boot record successfully written to /dev/sda2 (Posix.py|155)
[6] [Jul 03 11:13:35] Exit code: 0 (Posix.py|198)
[6] [Jul 03 11:13:35] Executing: /bin/mount   /dev/sda2 /mnt/hd (Posix.py|584)
[6] [Jul 03 11:13:36] Exit code: 0 (Posix.py|198)

Das sind meine Datei Versionen:
preloginloader_3.4-19.opsi
python_2.5.2-8.opsi
opsi-depotserver 3.3-10
opsi-linux-bootimage 20090414-1
opsiconfd 2.0.0.16-1

[wolfbardo]

Hallo,

bitte für die 64-Bit Version von Windows 7 das Paket win7-x64_3.3.1-2.opsi verwenden.

Wurde ein 64-Bit PE gemaess Anleitung erstellt/angepasst?

Ggfs Rechte pruefen/anpassen.

Code: Alles auswählen

chown -R opsiconfd:pcpatch /opt/pcbin/install/win7-x64

Falls das nicht hilft, bitte Log des Bootimages posten

Gruss
Bardo Wolf

[Foppel]

Hab jetzt das ganze mal mit der 32-Bit Version von Windows 7 probiert, aber leider keine Besserung immer noch der gleiche Fehler...

Hier mein LOG:

[6] [Jul 06 08:43:35] Executing: /usr/local/bin/patcha /mnt/hd/opsi/unattend.xml (setup.py|131)
[6] [Jul 06 08:43:35] Exit code: 0 (Posix.py|198)
[6] [Jul 06 08:43:35] Executing: /usr/local/bin/patcha -f /var/tmp/opsi/patcha.in /mnt/hd/opsi/unattend.xml (setup.py|132)
[6] [Jul 06 08:43:35] Exit code: 0 (Posix.py|198)
[6] [Jul 06 08:43:35] Executing: /usr/local/bin/patcha /mnt/hd/opsi/preloginloader/files/opsi/cfg/config.ini (setup.py|131)
[6] [Jul 06 08:43:35] Exit code: 0 (Posix.py|198)
[6] [Jul 06 08:43:35] Executing: /usr/local/bin/patcha -f /var/tmp/opsi/patcha.in /mnt/hd/opsi/preloginloader/files/opsi/cfg/config.ini (setup.py|132)
[6] [Jul 06 08:43:35] Exit code: 0 (Posix.py|198)
[6] [Jul 06 08:43:35] Command 'umount' found: '/bin/umount' (Posix.py|100)
[6] [Jul 06 08:43:35] Executing: /bin/umount /dev/sda2 (Posix.py|595)
[6] [Jul 06 08:43:36] Exit code: 0 (Posix.py|198)
[6] [Jul 06 08:43:36] Command 'sleep' found: '/bin/sleep' (Posix.py|100)
[6] [Jul 06 08:43:36] Command 'shutdown' found: '/sbin/shutdown' (Posix.py|100)
[6] [Jul 06 08:43:36] Executing: /bin/sleep 10; /sbin/shutdown -r now (Posix.py|320)
[6] [Jul 06 08:43:36] Command 'bash' found: '/bin/bash' (Posix.py|100)
[6] [Jul 06 08:43:36] Executing: cat /tmp/geo_override.log (master.py|638)
[6] [Jul 06 08:43:36] ->>> (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> Trying to load geo from /tmp/8:0.edd_geo (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> Couldn't open file: No such file or directory (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> Failed to load geo. (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> Kernel geometry: (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> HDIO_GETGEO heads 255 (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> HDIO_GETGEO sectors 63 (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> HDIO_GETGEO cylinders 9729 (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> BLKGETSIZE total sectors 156301488 (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> mbr signature 0 (0|0|0|0) (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> Found bios device int13_dev80, mbr_signature 0, total_sectors 156301488 (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> EDD BIOS geometry: (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> EDD heads 160 (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> EDD sectors 6 (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> EDD cylinders 162814 (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> EDD total sectors 156301488 (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> EDD mbr signature 0 (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> Interface ATA (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> HDIO_GETGEO ioctl overriden. (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> Storing geo in /tmp/8:0.edd_geo (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> Trying to load geo from /tmp/8:0.edd_geo (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> Loaded: (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> heads 160 (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> sectors 6 (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> cylinders 31742 (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> Trying to load geo from /tmp/8:0.edd_geo (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> Loaded: (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> heads 160 (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> sectors 6 (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> cylinders 31742 (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> Trying to load geo from /tmp/8:0.edd_geo (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> Loaded: (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> heads 160 (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> sectors 6 (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> cylinders 31742 (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> Trying to load geo from /tmp/8:0.edd_geo (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> Loaded: (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> heads 160 (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> sectors 6 (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> cylinders 31742 (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> Trying to load geo from /tmp/8:0.edd_geo (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> Loaded: (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> heads 160 (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> sectors 6 (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> cylinders 31742 (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> Trying to load geo from /tmp/8:0.edd_geo (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> Loaded: (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> heads 160 (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> sectors 6 (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> cylinders 31742 (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> Trying to load geo from /tmp/8:0.edd_geo (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> Loaded: (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> heads 160 (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> sectors 6 (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> cylinders 31742 (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> Trying to load geo from /tmp/8:0.edd_geo (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> Loaded: (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> heads 160 (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> sectors 6 (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> cylinders 31742 (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> Trying to load geo from /tmp/8:0.edd_geo (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> Loaded: (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> heads 160 (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> sectors 6 (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> cylinders 31742 (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> Trying to load geo from /tmp/8:0.edd_geo (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> Loaded: (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> heads 160 (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> sectors 6 (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> cylinders 31742 (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> Trying to load geo from /tmp/8:0.edd_geo (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> Loaded: (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> heads 160 (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> sectors 6 (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> cylinders 31742 (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> Trying to load geo from /tmp/8:0.edd_geo (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> Loaded: (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> heads 160 (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> sectors 6 (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> cylinders 31742 (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> Trying to load geo from /tmp/8:0.edd_geo (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> Loaded: (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> heads 160 (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> sectors 6 (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> cylinders 31742 (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> Trying to load geo from /tmp/8:0.edd_geo (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> Loaded: (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> heads 160 (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> sectors 6 (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> cylinders 31742 (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> Trying to load geo from /tmp/8:0.edd_geo (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> Loaded: (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> heads 160 (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> sectors 6 (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> cylinders 31742 (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> Trying to load geo from /tmp/8:0.edd_geo (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> Loaded: (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> heads 160 (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> sectors 6 (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> cylinders 31742 (Posix.py|155)
[6] [Jul 06 08:43:36] Exit code: 0 (Posix.py|198)
[6] [Jul 06 08:43:36] Executing: cat /var/tmp/opsi/sysconf.ini (master.py|640)
[6] [Jul 06 08:43:36] ->>> [General] (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> ipaddress=192.168.2.191 (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> netmask=255.255.255.0 (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> defaultgateway=192.168.2.1 (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> bootfile=linux/pxelinux.0 (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> hostname=testholg (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> pcname=testholg (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> bootserver=192.168.2.1 (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> depottftp=opsi (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> dnsdomain=test.de (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> productid=win7 (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> oncescript= (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> windowssoftwareids=[] (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> licenserequired=True (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> name=Windows 7 - x86 - deutsch (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> productclassnames=[] (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> advice= (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> uninstallscript= (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> setupscript=setup.py (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> priority=0 (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> pxeconfigtemplate= (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> productversion=3.3.1 (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> updatescript= (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> alwaysscript= (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> creationtimestamp=20090625151204 (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> packageversion=2 (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> description=Microsoft Betriebssystem (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> productkey=Gelöscht (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> additional_drivers= (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> askbeforeinst=false (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> orgname=Orgname (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> imagename=Windows 7 ULTIMATE (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> fullname=Name (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> winpenetworkmode=true (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> depotdrive=P: (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> nextbootserviceurl=https://opsi:4447 (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> utilsurl=smb://opsi/opt_pcbin/utils (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> configurl=smb://opsi/opt_pcbin/pcpatch (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> utilsdrive=P: (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> opsiserver=opsi (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> nextbootservertype=service (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> depoturl=smb://opsi/opt_pcbin/install (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> depotid=opsi (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> configdrive=O: (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> windomain=fb126 (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> pcptchbitmap1=winst1.bmp (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> pcptchbitmap2=winst2.bmp (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> button_stopnetworking= (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> pcptchlabel1=opsi (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> pcptchlabel2=uib (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> secsuntilconnectiontimeout=180 (Posix.py|155)
[6] [Jul 06 08:43:36] ->>> (Posix.py|155)
[6] [Jul 06 08:43:36] Exit code: 0 (Posix.py|198)

Grüsse aus Münster - Foppel

[wolfbardo]

Hab jetzt das ganze mal mit der 32-Bit Version von Windows 7 probiert, aber leider keine Besserung immer noch der gleiche Fehler...

mmh, einschalten des Glaskugelmodus...

Bitte genauer beschreiben, was "Hab jetzt das ganze ... probiert" ist, was versucht wurde, was genau die Fehlermeldung ist und dann ggfs die komplette Bootimagelog posten.

Gruss
Bardo Wolf

[Foppel]

Naja wie oben schon beschrieben, hab Win7 auf Setup gestellt und der Rechner hat auch die Dateien ohne Probleme kopiert. Beim Neustarten erhalte ich dann die Fehlermeldung: Datenträger entfernen Neustart: Taste drücken

bin jetzt erstmal im Urlaub, werd es danach mal mit der ganz neuen OPSI-VMWare Version testen. Vielleicht liegts ja daran...

bis dann - Foppel

[Foppel]

Ich bin mit der Win7 installation jetzt weiter gekommen. Es lag daran das er anfangs nur die Boot.wim im winpe Ordner hatte. WinPE braucht aber noch ein paar andere Dateien um richtig booten zu können. Im Moment kommt ein Dialog zur Treiber Auswahl und man kommt nicht mit der Installation weiter. Ich schätze mal das die unattended.xml nicht richtig verarbeitet/verändert wird, werde ich nochmals prüfen...

Im Handbuch korrigieren:
opsiserver-installation-v34-de.pdf
S32.
Hier steht:
3. Image mounten mit
"C:\Program Files\WindowPhilips
AIK\Tools\x86\imagex.exe" /mountrw
C:\winpe_x86\ISO\sources\boot.wim 1 c:\winpe_x86\mount

Ansonsten wird nirgends mehr erwähnt das man die Boot.vim von der CD in den Ordner C:\winpe_x86\ISO\sources\boot.wim kopieren sollte...

greets - Foppel