How do i activate hwaudit and swaudit

Antworten
htaute
Beiträge: 4
Registriert: 28 Okt 2008, 10:23

How do i activate hwaudit and swaudit

Beitrag von htaute »

I have installed Opsi v3.3 on a VM server and ran service_setup.cmd on my pc. In the Opsi Config editor i see that my pc was added as a client. How do i activate hwaudit/hwinvent and swaudit as i cannot seem to gather it out of the installation manual?
Benutzeravatar
wolfbardo
uib-Team
Beiträge: 1354
Registriert: 01 Jul 2008, 12:10

Re: How do i activate hwaudit and swaudit

Beitrag von wolfbardo »

see chapter

3.2.6. Product configuration

for hwaudit/swaudit

and

3.2.7. Netboot products

for hwinvent

in the opsi-manual-v33-en.pdf

regards,

Bardo Wolf


OPSICONF 2024
https://opsi.org/en/opsiconf/

opsi-Basisworkshops:

22. - 25. 04. 2024


opsi support - uib gmbh
For productive opsi installations we recommend maintainance + support contracts which are the base of opsi development.

http://www.uib.de
htaute
Beiträge: 4
Registriert: 28 Okt 2008, 10:23

Re: How do i activate hwaudit and swaudit

Beitrag von htaute »

In the Product Configuration the installation_state is not_installed. Must i change it to another state and must i change the action_request as well?
wardenik
Beiträge: 65
Registriert: 27 Okt 2008, 12:22

Re: How do i activate hwaudit and swaudit

Beitrag von wardenik »

No, just change the action to setup.
Benutzeravatar
j.schneider
uib-Team
Beiträge: 1789
Registriert: 29 Mai 2008, 15:14

Re: How do i activate hwaudit and swaudit

Beitrag von j.schneider »

You have to set an action request.
The instllation status is always the result of an action performed.
htaute
Beiträge: 4
Registriert: 28 Okt 2008, 10:23

Re: How do i activate hwaudit and swaudit

Beitrag von htaute »

I have done as suggested ie changing the "action request" for hwaudit, swaudit and python to setup but still no joy. If i change the :installation state" to installed it actualy gives me the version and package. They say Python is a prerequirement for hwaudit and swaudit.
Benutzeravatar
wolfbardo
uib-Team
Beiträge: 1354
Registriert: 01 Jul 2008, 12:10

Re: How do i activate hwaudit and swaudit

Beitrag von wolfbardo »

htaute hat geschrieben:They say Python is a prerequirement for hwaudit and swaudit.
It is.
j.schneider hat geschrieben:You have to set an action request.
and save inconfiged.

Restart your opsi-Client and pheck/post c:\tmp\logoblog.txt and c:\tmp\instlog.txt

regards

Bardo Wolf


OPSICONF 2024
https://opsi.org/en/opsiconf/

opsi-Basisworkshops:

22. - 25. 04. 2024


opsi support - uib gmbh
For productive opsi installations we recommend maintainance + support contracts which are the base of opsi development.

http://www.uib.de
htaute
Beiträge: 4
Registriert: 28 Okt 2008, 10:23

Re: How do i activate hwaudit and swaudit

Beitrag von htaute »

Thank you all for your patience and assistance. Bardo, I looked at the logonlog.txt and saw that there was no WINS entry for the server so it could not connect to the share to do the setups required. After creating a WINS entry everything ran well. Thanks again.
Regards
Henri Taute
Antworten