HP ProBook 450G5

Antworten
reneschmidt
Beiträge: 34
Registriert: 04 Aug 2015, 18:49

HP ProBook 450G5

Beitrag von reneschmidt »

Hallo zusammen,

wir haben ein Problem mit der neusten HP ProBook 450 Generation (G5).

Wenn wir auf diesen Notebooks die neueste Linux Boot CD in booten und dann das Netboot Produkt W10 auswähle, fällt das Produkt immer wieder auf die Nase:

Code: Alles auswählen

we are not running in uefi mode                                                                                                                                                                         
 Starte Hardware-Inventarisierung                                                                                                                                                                        
 Disk /dev/nvme0n1 is not rotational (SSD)                                                                                                                                                                
 Disk /dev/nvme0n1 is not rotational (SSD)                                                                                                                                                                
 Using harddisk /dev/nvme0n1 (244198 MB).                                                                                                                                                                 
 Deleted partition Table on /dev/nvme0n1 - Perhaps you need a restart.....                                                                                                                                
 Lösche Partitionstabelle auf /dev/nvme0n1                                                                                                                                                               
 Create system partition                                                                                                                                                                                  
 Erstelle Partition (start: 0M, ende: 239198M, dateisystem: ntfs, typ: primary, boot: False, lba: False) auf Festplatte /dev/nvme0n1                                                                     
 Error checking /dev/nvme0n11. partition                                                                                                                                                                  
 Ãbertrage Log-Datei zum Service 
Fehlermeldung:
Error checking /dev/nvme0n11. partition

Die Logdatei besagt folgendes:

Code: Alles auswählen

" | /sbin/sfdisk -L --no-reread -D /dev/nvme0n1 (Posix.py|768)
[6] [Feb 16 14:13:26] Using encoding 'ANSI_X3.4-1968' (Posix.py|801)
[7] [Feb 16 14:13:26] >>>  (Posix.py|845)
[7] [Feb 16 14:13:26] >>> Disk /dev/nvme0n1: 244198 cylinders, 64 heads, 32 sectors/track (Posix.py|845)
[7] [Feb 16 14:13:26] >>> Old situation: (Posix.py|845)
[7] [Feb 16 14:13:26] >>> New situation: (Posix.py|845)
[7] [Feb 16 14:13:26] >>> Units: cylinders of 1048576 bytes, blocks of 1024 bytes, counting from 0 (Posix.py|845)
[7] [Feb 16 14:13:26] >>>  (Posix.py|845)
[7] [Feb 16 14:13:26] >>>    Device Boot Start     End   #cyls    #blocks   Id  System (Posix.py|845)
[7] [Feb 16 14:13:26] >>> /dev/nvme0n1p1          0       -       0          0    0  Empty (Posix.py|845)
[7] [Feb 16 14:13:26] >>> /dev/nvme0n1p2          0       -       0          0    0  Empty (Posix.py|845)
[7] [Feb 16 14:13:26] >>> /dev/nvme0n1p3          0       -       0          0    0  Empty (Posix.py|845)
[7] [Feb 16 14:13:26] >>> /dev/nvme0n1p4          0       -       0          0    0  Empty (Posix.py|845)
[7] [Feb 16 14:13:26] >>> Successfully wrote the new partition table (Posix.py|845)
[7] [Feb 16 14:13:26] >>>  (Posix.py|845)
[7] [Feb 16 14:13:26] >>> sfdisk:  /dev/nvme0n1: unrecognized partition table type (Posix.py|845)
[7] [Feb 16 14:13:26] >>> sfdisk: No partitions found (Posix.py|845)
[7] [Feb 16 14:13:26] >>> sfdisk: Warning: no primary partition is marked bootable (active) (Posix.py|845)
[7] [Feb 16 14:13:26] >>> This does not matter for LILO, but the DOS MBR will not boot this disk. (Posix.py|845)
[7] [Feb 16 14:13:26] >>> Re-reading the partition table ... (Posix.py|845)
[7] [Feb 16 14:13:26] >>>  (Posix.py|845)
[7] [Feb 16 14:13:26] >>> sfdisk: If you created or changed a DOS partition, /dev/foo7, say, then use dd(1) (Posix.py|845)
[7] [Feb 16 14:13:26] >>> to zero the first 512 bytes:  dd if=/dev/zero of=/dev/foo7 bs=512 count=1 (Posix.py|845)
[7] [Feb 16 14:13:26] >>> (See fdisk(8).) (Posix.py|845)
[7] [Feb 16 14:13:26] Exit code: 0 (Posix.py|852)
[6] [Feb 16 14:13:26] Executing: /sbin/sfdisk -L --no-reread -l /dev/nvme0n1 (Posix.py|768)
[6] [Feb 16 14:13:26] Using encoding 'ANSI_X3.4-1968' (Posix.py|801)
[7] [Feb 16 14:13:26] >>>  (Posix.py|845)
[7] [Feb 16 14:13:26] >>> Disk /dev/nvme0n1: 244198 cylinders, 64 heads, 32 sectors/track (Posix.py|845)
[7] [Feb 16 14:13:26] >>> Units: cylinders of 1048576 bytes, blocks of 1024 bytes, counting from 0 (Posix.py|845)
[7] [Feb 16 14:13:26] >>>  (Posix.py|845)
[7] [Feb 16 14:13:26] >>>    Device Boot Start     End   #cyls    #blocks   Id  System (Posix.py|845)
[7] [Feb 16 14:13:26] >>> /dev/nvme0n1p1          0       -       0          0    0  Empty (Posix.py|845)
[7] [Feb 16 14:13:26] >>> /dev/nvme0n1p2          0       -       0          0    0  Empty (Posix.py|845)
[7] [Feb 16 14:13:26] >>> /dev/nvme0n1p3          0       -       0          0    0  Empty (Posix.py|845)
[7] [Feb 16 14:13:26] >>> /dev/nvme0n1p4          0       -       0          0    0  Empty (Posix.py|845)
[7] [Feb 16 14:13:26] Exit code: 0 (Posix.py|852)
[6] [Feb 16 14:13:26] Executing: /sbin/sfdisk --version (Posix.py|768)
[6] [Feb 16 14:13:26] Using encoding 'ANSI_X3.4-1968' (Posix.py|801)
[7] [Feb 16 14:13:26] >>> sfdisk from util-linux 2.25.2 (Posix.py|845)
[7] [Feb 16 14:13:26] Exit code: 0 (Posix.py|852)
[6] [Feb 16 14:13:26] Executing: /sbin/sfdisk --version (Posix.py|768)
[6] [Feb 16 14:13:26] Using encoding 'ANSI_X3.4-1968' (Posix.py|801)
[7] [Feb 16 14:13:26] >>> sfdisk from util-linux 2.25.2 (Posix.py|845)
[7] [Feb 16 14:13:26] Exit code: 0 (Posix.py|852)
[6] [Feb 16 14:13:26] Total cylinders of disk '/dev/nvme0n1': 244198, 1048576 bytes per cylinder (Posix.py|1523)
[6] [Feb 16 14:13:26] Executing: /sbin/sfdisk --version (Posix.py|768)
[6] [Feb 16 14:13:26] Using encoding 'ANSI_X3.4-1968' (Posix.py|801)
[7] [Feb 16 14:13:26] >>> sfdisk from util-linux 2.25.2 (Posix.py|845)
[7] [Feb 16 14:13:26] Exit code: 0 (Posix.py|852)
[6] [Feb 16 14:13:26] Executing: /sbin/sfdisk --version (Posix.py|768)
[6] [Feb 16 14:13:26] Using encoding 'ANSI_X3.4-1968' (Posix.py|801)
[7] [Feb 16 14:13:26] >>> sfdisk from util-linux 2.25.2 (Posix.py|845)
[7] [Feb 16 14:13:26] Exit code: 0 (Posix.py|852)
[6] [Feb 16 14:13:26] Executing: /sbin/sfdisk --version (Posix.py|768)
[6] [Feb 16 14:13:26] Using encoding 'ANSI_X3.4-1968' (Posix.py|801)
[7] [Feb 16 14:13:26] >>> sfdisk from util-linux 2.25.2 (Posix.py|845)
[7] [Feb 16 14:13:26] Exit code: 0 (Posix.py|852)
[6] [Feb 16 14:13:26] Executing: /sbin/sfdisk --version (Posix.py|768)
[6] [Feb 16 14:13:26] Using encoding 'ANSI_X3.4-1968' (Posix.py|801)
[7] [Feb 16 14:13:26] >>> sfdisk from util-linux 2.25.2 (Posix.py|845)
[7] [Feb 16 14:13:26] Exit code: 0 (Posix.py|852)
[6] [Feb 16 14:13:26] Executing: /sbin/sfdisk --version (Posix.py|768)
[6] [Feb 16 14:13:26] Using encoding 'ANSI_X3.4-1968' (Posix.py|801)
[7] [Feb 16 14:13:26] >>> sfdisk from util-linux 2.25.2 (Posix.py|845)
[7] [Feb 16 14:13:26] Exit code: 0 (Posix.py|852)
[6] [Feb 16 14:13:26] Executing: /sbin/sfdisk -L --no-reread -uS -l /dev/nvme0n1 (Posix.py|768)
[6] [Feb 16 14:13:26] Using encoding 'ANSI_X3.4-1968' (Posix.py|801)
[7] [Feb 16 14:13:26] >>>  (Posix.py|845)
[7] [Feb 16 14:13:26] >>> Disk /dev/nvme0n1: 244198 cylinders, 64 heads, 32 sectors/track (Posix.py|845)
[7] [Feb 16 14:13:26] >>> Units: sectors of 512 bytes, counting from 0 (Posix.py|845)
[7] [Feb 16 14:13:26] >>>  (Posix.py|845)
[7] [Feb 16 14:13:26] >>>    Device Boot    Start       End   #sectors  Id  System (Posix.py|845)
[7] [Feb 16 14:13:26] >>> /dev/nvme0n1p1             0         -          0   0  Empty (Posix.py|845)
[7] [Feb 16 14:13:26] >>> /dev/nvme0n1p2             0         -          0   0  Empty (Posix.py|845)
[7] [Feb 16 14:13:26] >>> /dev/nvme0n1p3             0         -          0   0  Empty (Posix.py|845)
[7] [Feb 16 14:13:26] >>> /dev/nvme0n1p4             0         -          0   0  Empty (Posix.py|845)
[7] [Feb 16 14:13:26] Exit code: 0 (Posix.py|852)
[6] [Feb 16 14:13:26] Executing: /sbin/sfdisk --version (Posix.py|768)
[6] [Feb 16 14:13:26] Using encoding 'ANSI_X3.4-1968' (Posix.py|801)
[7] [Feb 16 14:13:26] >>> sfdisk from util-linux 2.25.2 (Posix.py|845)
[7] [Feb 16 14:13:26] Exit code: 0 (Posix.py|852)
[6] [Feb 16 14:13:26] Total sectors of disk '/dev/nvme0n1': 500118192, 512 bytes per cylinder (Posix.py|1658)
[6] [Feb 16 14:13:26] Executing: /sbin/sfdisk --version (Posix.py|768)
[6] [Feb 16 14:13:26] Using encoding 'ANSI_X3.4-1968' (Posix.py|801)
[7] [Feb 16 14:13:26] >>> sfdisk from util-linux 2.25.2 (Posix.py|845)
[7] [Feb 16 14:13:26] Exit code: 0 (Posix.py|852)
[6] [Feb 16 14:13:26] Executing: /sbin/sfdisk --version (Posix.py|768)
[6] [Feb 16 14:13:26] Using encoding 'ANSI_X3.4-1968' (Posix.py|801)
[7] [Feb 16 14:13:26] >>> sfdisk from util-linux 2.25.2 (Posix.py|845)
[7] [Feb 16 14:13:26] Exit code: 0 (Posix.py|852)
[6] [Feb 16 14:13:26] Executing: /sbin/sfdisk --version (Posix.py|768)
[6] [Feb 16 14:13:26] Using encoding 'ANSI_X3.4-1968' (Posix.py|801)
[7] [Feb 16 14:13:26] >>> sfdisk from util-linux 2.25.2 (Posix.py|845)
[7] [Feb 16 14:13:26] Exit code: 0 (Posix.py|852)
[6] [Feb 16 14:13:26] Executing: /sbin/sfdisk --version (Posix.py|768)
[6] [Feb 16 14:13:26] Using encoding 'ANSI_X3.4-1968' (Posix.py|801)
[7] [Feb 16 14:13:26] >>> sfdisk from util-linux 2.25.2 (Posix.py|845)
[7] [Feb 16 14:13:26] Exit code: 0 (Posix.py|852)
[7] [Feb 16 14:13:26] Try to determine ms-sys version (Posix.py|1928)
[7] [Feb 16 14:13:26] Command 'ms-sys' found at: '/usr/local/bin/ms-sys' (Posix.py|709)
[6] [Feb 16 14:13:26] Executing: /usr/local/bin/ms-sys -v (Posix.py|768)
[6] [Feb 16 14:13:26] Using encoding 'ANSI_X3.4-1968' (Posix.py|801)
[7] [Feb 16 14:13:26] >>> ms-sys version 2.1.3 (Posix.py|845)
[7] [Feb 16 14:13:26] >>> Written by Henrik Carlqvist (henca@users.SourceForge.net) (Posix.py|845)
[7] [Feb 16 14:13:26] >>>  (Posix.py|845)
[7] [Feb 16 14:13:26] >>> Copyright (C) 2002 Free Software Foundation, Inc. (Posix.py|845)
[7] [Feb 16 14:13:26] >>> This is free software; see the source for copying conditions.  There is NO (Posix.py|845)
[7] [Feb 16 14:13:26] >>> warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. (Posix.py|845)
[7] [Feb 16 14:13:26] >>>  (Posix.py|845)
[7] [Feb 16 14:13:26] Exit code: 0 (Posix.py|852)
[6] [Feb 16 14:13:26] Writing master boot record on '/dev/nvme0n1' (system: vista) (Posix.py|1954)
[6] [Feb 16 14:13:26] Executing: /usr/local/bin/ms-sys --mbrnt60 /dev/nvme0n1 (Posix.py|768)
[6] [Feb 16 14:13:26] Using encoding 'ANSI_X3.4-1968' (Posix.py|801)
[7] [Feb 16 14:13:26] >>> Windows Vista master boot record successfully written to /dev/nvme0n1 (Posix.py|845)
[7] [Feb 16 14:13:26] Exit code: 0 (Posix.py|852)
[7] [Feb 16 14:13:26] Executing jsonrpc method 'backend_setOptions' on host u'***.***.***.120' (JSONRPC.py|115)
[7] [Feb 16 14:13:26] Posting request... (JSONRPC.py|713)
[7] [Feb 16 14:13:26] Starting new HTTPS connection (0) to ***.***.***.120:4447 (HTTP.py|648)
[7] [Feb 16 14:13:26] Connection established to: ***.***.***.120 (HTTP.py|650)
[7] [Feb 16 14:13:26] Closing connection: <httplib.HTTPSConnection instance at 0x7f4a18be8ef0> (HTTP.py|569)
[7] [Feb 16 14:13:26] Content-Type: gzip-application/json;charset=utf-8, Content-Encoding: deflate (JSONRPC.py|730)
[7] [Feb 16 14:13:26] Expecting deflated data from server (backwards compatible) (JSONRPC.py|738)
[7] [Feb 16 14:13:26] Executing jsonrpc method 'productOnClient_getObjects' on host u'***.***.***.120' (JSONRPC.py|115)
[7] [Feb 16 14:13:26] Posting request... (JSONRPC.py|713)
[7] [Feb 16 14:13:26] Starting new HTTPS connection (0) to ***.***.***.120:4447 (HTTP.py|648)
[7] [Feb 16 14:13:26] Connection established to: ***.***.***.120 (HTTP.py|650)
[7] [Feb 16 14:13:26] Closing connection: <httplib.HTTPSConnection instance at 0x7f4a18dc1d88> (HTTP.py|569)
[7] [Feb 16 14:13:26] Content-Type: gzip-application/json;charset=utf-8, Content-Encoding: deflate (JSONRPC.py|730)
[7] [Feb 16 14:13:26] Expecting deflated data from server (backwards compatible) (JSONRPC.py|738)
[7] [Feb 16 14:13:26] Executing jsonrpc method 'productOnClient_deleteObjects' on host u'***.***.***.120' (JSONRPC.py|115)
[7] [Feb 16 14:13:26] Posting request... (JSONRPC.py|713)
[7] [Feb 16 14:13:26] Starting new HTTPS connection (0) to ***.***.***.120:4447 (HTTP.py|648)
[7] [Feb 16 14:13:26] Connection established to: ***.***.***.120 (HTTP.py|650)
[7] [Feb 16 14:13:26] Closing connection: <httplib.HTTPSConnection instance at 0x7f4a18be8ef0> (HTTP.py|569)
[7] [Feb 16 14:13:26] Content-Type: gzip-application/json;charset=utf-8, Content-Encoding: deflate (JSONRPC.py|730)
[7] [Feb 16 14:13:26] Expecting deflated data from server (backwards compatible) (JSONRPC.py|738)
[5] [Feb 16 14:13:26] Create system partition on /dev/nvme0n11 start: 0M, size: 239198M (opsisetuplib.py|163)
[6] [Feb 16 14:13:26] Executing: /sbin/sfdisk --version (Posix.py|768)
[6] [Feb 16 14:13:26] Using encoding 'ANSI_X3.4-1968' (Posix.py|801)
[7] [Feb 16 14:13:26] >>> sfdisk from util-linux 2.25.2 (Posix.py|845)
[7] [Feb 16 14:13:26] Exit code: 0 (Posix.py|852)
[6] [Feb 16 14:13:26] Creating partition on '/dev/nvme0n1': number: 1, type 'primary', filesystem 'ntfs', start: 2048 sec, end: 489879551 sec. (Posix.py|2272)
[7] [Feb 16 14:13:26] Writing partition table to disk /dev/nvme0n1 (Posix.py|1661)
[7] [Feb 16 14:13:26]    number: 1, start: 1 MB (2048 sec), end: 250818 MB (489879551 sec), size: 250817 MB (489877504 sec), type: 7, fs: ntfs, boot: False (Posix.py|1676)
[7] [Feb 16 14:13:26] Partition 2 not found: Partition 2 does not exist (Posix.py|1692)
[7] [Feb 16 14:13:26] Partition 3 not found: Partition 3 does not exist (Posix.py|1692)
[7] [Feb 16 14:13:26] Partition 4 not found: Partition 4 does not exist (Posix.py|1692)
[6] [Feb 16 14:13:26] Executing: /bin/echo -e "2048,489877504,7
0,0
0,0
0,0
" | /sbin/sfdisk -L --no-reread -uS -f /dev/nvme0n1 (Posix.py|768)
[6] [Feb 16 14:13:26] Using encoding 'ANSI_X3.4-1968' (Posix.py|801)
[7] [Feb 16 14:13:26] >>> sfdisk: Warning: no primary partition is marked bootable (active) (Posix.py|845)
[7] [Feb 16 14:13:26] >>> This does not matter for LILO, but the DOS MBR will not boot this disk. (Posix.py|845)
[7] [Feb 16 14:13:26] >>>  (Posix.py|845)
[7] [Feb 16 14:13:26] >>> Disk /dev/nvme0n1: 244198 cylinders, 64 heads, 32 sectors/track (Posix.py|845)
[7] [Feb 16 14:13:26] >>> Old situation: (Posix.py|845)
[7] [Feb 16 14:13:26] >>> Units: sectors of 512 bytes, counting from 0 (Posix.py|845)
[7] [Feb 16 14:13:26] >>>  (Posix.py|845)
[7] [Feb 16 14:13:26] >>>    Device Boot    Start       End   #sectors  Id  System (Posix.py|845)
[7] [Feb 16 14:13:26] >>> /dev/nvme0n1p1             0         -          0   0  Empty (Posix.py|845)
[7] [Feb 16 14:13:26] >>> /dev/nvme0n1p2             0         -          0   0  Empty (Posix.py|845)
[7] [Feb 16 14:13:26] >>> /dev/nvme0n1p3             0         -          0   0  Empty (Posix.py|845)
[7] [Feb 16 14:13:26] >>> /dev/nvme0n1p4             0         -          0   0  Empty (Posix.py|845)
[7] [Feb 16 14:13:26] >>> New situation: (Posix.py|845)
[7] [Feb 16 14:13:26] >>> Units: sectors of 512 bytes, counting from 0 (Posix.py|845)
[7] [Feb 16 14:13:26] >>>  (Posix.py|845)
[7] [Feb 16 14:13:26] >>>    Device Boot    Start       End   #sectors  Id  System (Posix.py|845)
[7] [Feb 16 14:13:26] >>> /dev/nvme0n1p1          2048 489879551  489877504   7  HPFS/NTFS/exFAT (Posix.py|845)
[7] [Feb 16 14:13:26] >>> /dev/nvme0n1p2             0         -          0   0  Empty (Posix.py|845)
[7] [Feb 16 14:13:26] >>> /dev/nvme0n1p3             0         -          0   0  Empty (Posix.py|845)
[7] [Feb 16 14:13:26] >>> /dev/nvme0n1p4             0         -          0   0  Empty (Posix.py|845)
[7] [Feb 16 14:13:26] >>> Successfully wrote the new partition table (Posix.py|845)
[7] [Feb 16 14:13:26] >>>  (Posix.py|845)
[7] [Feb 16 14:13:26] >>> Re-reading the partition table ... (Posix.py|845)
[7] [Feb 16 14:13:26] >>>  (Posix.py|845)
[7] [Feb 16 14:13:26] >>> sfdisk: If you created or changed a DOS partition, /dev/foo7, say, then use dd(1) (Posix.py|845)
[7] [Feb 16 14:13:26] >>> to zero the first 512 bytes:  dd if=/dev/zero of=/dev/foo7 bs=512 count=1 (Posix.py|845)
[7] [Feb 16 14:13:26] >>> (See fdisk(8).) (Posix.py|845)
[7] [Feb 16 14:13:26] Exit code: 0 (Posix.py|852)
[6] [Feb 16 14:13:26] Forcing kernel to reread partition table of '/dev/nvme0n1'. (Posix.py|1726)
[6] [Feb 16 14:13:26] Executing: /sbin/partprobe /dev/nvme0n1 (Posix.py|768)
[6] [Feb 16 14:13:26] Using encoding 'ANSI_X3.4-1968' (Posix.py|801)
[7] [Feb 16 14:13:26] Exit code: 0 (Posix.py|852)
[6] [Feb 16 14:13:28] Executing: /sbin/sfdisk --version (Posix.py|768)
[6] [Feb 16 14:13:28] Using encoding 'ANSI_X3.4-1968' (Posix.py|801)
[7] [Feb 16 14:13:28] >>> sfdisk from util-linux 2.25.2 (Posix.py|845)
[7] [Feb 16 14:13:28] Exit code: 0 (Posix.py|852)
[6] [Feb 16 14:13:28] Executing: /sbin/sfdisk -L --no-reread -s -uB /dev/nvme0n1 (Posix.py|768)
[6] [Feb 16 14:13:28] Using encoding 'ANSI_X3.4-1968' (Posix.py|801)
[7] [Feb 16 14:13:28] >>> 250059096 (Posix.py|845)
[7] [Feb 16 14:13:28] Exit code: 0 (Posix.py|852)
[6] [Feb 16 14:13:28] Size of disk '/dev/nvme0n1': 256060514304 Byte / 244198 MB (Posix.py|1441)
[6] [Feb 16 14:13:28] Executing: /sbin/sfdisk --version (Posix.py|768)
[6] [Feb 16 14:13:28] Using encoding 'ANSI_X3.4-1968' (Posix.py|801)
[7] [Feb 16 14:13:28] >>> sfdisk from util-linux 2.25.2 (Posix.py|845)
[7] [Feb 16 14:13:28] Exit code: 0 (Posix.py|852)
[6] [Feb 16 14:13:28] Executing: /sbin/sfdisk -L --no-reread -l /dev/nvme0n1 (Posix.py|768)
[6] [Feb 16 14:13:29] Using encoding 'ANSI_X3.4-1968' (Posix.py|801)
[7] [Feb 16 14:13:29] >>>  (Posix.py|845)
[7] [Feb 16 14:13:29] >>> Disk /dev/nvme0n1: 244198 cylinders, 64 heads, 32 sectors/track (Posix.py|845)
[7] [Feb 16 14:13:29] >>> Units: cylinders of 1048576 bytes, blocks of 1024 bytes, counting from 0 (Posix.py|845)
[7] [Feb 16 14:13:29] >>>  (Posix.py|845)
[7] [Feb 16 14:13:29] >>>    Device Boot Start     End   #cyls    #blocks   Id  System (Posix.py|845)
[7] [Feb 16 14:13:29] >>> /dev/nvme0n1p1          1  239198  239198  244938752    7  HPFS/NTFS/exFAT (Posix.py|845)
[7] [Feb 16 14:13:29] >>> /dev/nvme0n1p2          0       -       0          0    0  Empty (Posix.py|845)
[7] [Feb 16 14:13:29] >>> /dev/nvme0n1p3          0       -       0          0    0  Empty (Posix.py|845)
[7] [Feb 16 14:13:29] >>> /dev/nvme0n1p4          0       -       0          0    0  Empty (Posix.py|845)
[7] [Feb 16 14:13:29] Exit code: 0 (Posix.py|852)
[6] [Feb 16 14:13:29] Executing: /sbin/sfdisk --version (Posix.py|768)
[6] [Feb 16 14:13:29] Using encoding 'ANSI_X3.4-1968' (Posix.py|801)
[7] [Feb 16 14:13:29] >>> sfdisk from util-linux 2.25.2 (Posix.py|845)
[7] [Feb 16 14:13:29] Exit code: 0 (Posix.py|852)
[6] [Feb 16 14:13:29] Executing: /sbin/sfdisk --version (Posix.py|768)
[6] [Feb 16 14:13:29] Using encoding 'ANSI_X3.4-1968' (Posix.py|801)
[7] [Feb 16 14:13:29] >>> sfdisk from util-linux 2.25.2 (Posix.py|845)
[7] [Feb 16 14:13:29] Exit code: 0 (Posix.py|852)
[6] [Feb 16 14:13:29] Total cylinders of disk '/dev/nvme0n1': 244198, 1048576 bytes per cylinder (Posix.py|1523)
[6] [Feb 16 14:13:29] Executing: /sbin/sfdisk --version (Posix.py|768)
[6] [Feb 16 14:13:29] Using encoding 'ANSI_X3.4-1968' (Posix.py|801)
[7] [Feb 16 14:13:29] >>> sfdisk from util-linux 2.25.2 (Posix.py|845)
[7] [Feb 16 14:13:29] Exit code: 0 (Posix.py|852)
[7] [Feb 16 14:13:29] Trying using Blkid (Posix.py|1551)
[6] [Feb 16 14:13:29] Executing: /sbin/blkid -o value -s TYPE /dev/nvme0n1p1 (Posix.py|768)
[6] [Feb 16 14:13:29] Using encoding 'ANSI_X3.4-1968' (Posix.py|801)
[7] [Feb 16 14:13:29] >>> vfat (Posix.py|845)
[7] [Feb 16 14:13:29] Exit code: 0 (Posix.py|852)
[7] [Feb 16 14:13:29] Found filesystem: vfat with blkid tool, using now this filesystemtype. (Posix.py|1558)
[7] [Feb 16 14:13:29] Partition found =>>> number: 1, start: 1 MB (1 cyl), end: 239199 MB (239198 cyl), size: 239198 MB (239198 cyl), type: 7, fs: vfat, boot: False (Posix.py|1593)
[7] [Feb 16 14:13:29] Waiting for device '/dev/nvme0n1p1' to appear (Posix.py|1598)
[7] [Feb 16 14:13:29] Device '/dev/nvme0n1p1' found (Posix.py|1606)
[6] [Feb 16 14:13:29] Executing: /sbin/sfdisk --version (Posix.py|768)
[6] [Feb 16 14:13:29] Using encoding 'ANSI_X3.4-1968' (Posix.py|801)
[7] [Feb 16 14:13:29] >>> sfdisk from util-linux 2.25.2 (Posix.py|845)
[7] [Feb 16 14:13:29] Exit code: 0 (Posix.py|852)
[6] [Feb 16 14:13:29] Executing: /sbin/sfdisk --version (Posix.py|768)
[6] [Feb 16 14:13:29] Using encoding 'ANSI_X3.4-1968' (Posix.py|801)
[7] [Feb 16 14:13:29] >>> sfdisk from util-linux 2.25.2 (Posix.py|845)
[7] [Feb 16 14:13:29] Exit code: 0 (Posix.py|852)
[6] [Feb 16 14:13:29] Executing: /sbin/sfdisk --version (Posix.py|768)
[6] [Feb 16 14:13:29] Using encoding 'ANSI_X3.4-1968' (Posix.py|801)
[7] [Feb 16 14:13:29] >>> sfdisk from util-linux 2.25.2 (Posix.py|845)
[7] [Feb 16 14:13:29] Exit code: 0 (Posix.py|852)
[6] [Feb 16 14:13:29] Executing: /sbin/sfdisk --version (Posix.py|768)
[6] [Feb 16 14:13:29] Using encoding 'ANSI_X3.4-1968' (Posix.py|801)
[7] [Feb 16 14:13:29] >>> sfdisk from util-linux 2.25.2 (Posix.py|845)
[7] [Feb 16 14:13:29] Exit code: 0 (Posix.py|852)
[6] [Feb 16 14:13:29] Executing: /sbin/sfdisk -L --no-reread -uS -l /dev/nvme0n1 (Posix.py|768)
[6] [Feb 16 14:13:29] Using encoding 'ANSI_X3.4-1968' (Posix.py|801)
[7] [Feb 16 14:13:29] >>>  (Posix.py|845)
[7] [Feb 16 14:13:29] >>> Disk /dev/nvme0n1: 244198 cylinders, 64 heads, 32 sectors/track (Posix.py|845)
[7] [Feb 16 14:13:29] >>> Units: sectors of 512 bytes, counting from 0 (Posix.py|845)
[7] [Feb 16 14:13:29] >>>  (Posix.py|845)
[7] [Feb 16 14:13:29] >>>    Device Boot    Start       End   #sectors  Id  System (Posix.py|845)
[7] [Feb 16 14:13:29] >>> /dev/nvme0n1p1          2048 489879551  489877504   7  HPFS/NTFS/exFAT (Posix.py|845)
[7] [Feb 16 14:13:29] >>> /dev/nvme0n1p2             0         -          0   0  Empty (Posix.py|845)
[7] [Feb 16 14:13:29] >>> /dev/nvme0n1p3             0         -          0   0  Empty (Posix.py|845)
[7] [Feb 16 14:13:29] >>> /dev/nvme0n1p4             0         -          0   0  Empty (Posix.py|845)
[7] [Feb 16 14:13:29] Exit code: 0 (Posix.py|852)
[6] [Feb 16 14:13:29] Executing: /sbin/sfdisk --version (Posix.py|768)
[6] [Feb 16 14:13:29] Using encoding 'ANSI_X3.4-1968' (Posix.py|801)
[7] [Feb 16 14:13:29] >>> sfdisk from util-linux 2.25.2 (Posix.py|845)
[7] [Feb 16 14:13:29] Exit code: 0 (Posix.py|852)
[6] [Feb 16 14:13:29] Total sectors of disk '/dev/nvme0n1': 500118192, 512 bytes per cylinder (Posix.py|1658)
[6] [Feb 16 14:13:29] Executing: /sbin/sfdisk --version (Posix.py|768)
[6] [Feb 16 14:13:29] Using encoding 'ANSI_X3.4-1968' (Posix.py|801)
[7] [Feb 16 14:13:29] >>> sfdisk from util-linux 2.25.2 (Posix.py|845)
[7] [Feb 16 14:13:29] Exit code: 0 (Posix.py|852)
[7] [Feb 16 14:13:29] Partition sector values =>>> number: 1, start: 2048 sec, end: 489879551 sec, size: 489877504 sec  (Posix.py|1643)
[6] [Feb 16 14:13:29] Executing: /sbin/sfdisk --version (Posix.py|768)
[6] [Feb 16 14:13:29] Using encoding 'ANSI_X3.4-1968' (Posix.py|801)
[7] [Feb 16 14:13:29] >>> sfdisk from util-linux 2.25.2 (Posix.py|845)
[7] [Feb 16 14:13:29] Exit code: 0 (Posix.py|852)
[6] [Feb 16 14:13:29] Executing: /sbin/sfdisk --version (Posix.py|768)
[6] [Feb 16 14:13:29] Using encoding 'ANSI_X3.4-1968' (Posix.py|801)
[7] [Feb 16 14:13:29] >>> sfdisk from util-linux 2.25.2 (Posix.py|845)
[7] [Feb 16 14:13:29] Exit code: 0 (Posix.py|852)
[6] [Feb 16 14:13:29] Executing: /sbin/sfdisk --version (Posix.py|768)
[6] [Feb 16 14:13:29] Using encoding 'ANSI_X3.4-1968' (Posix.py|801)
[7] [Feb 16 14:13:29] >>> sfdisk from util-linux 2.25.2 (Posix.py|845)
[7] [Feb 16 14:13:29] Exit code: 0 (Posix.py|852)
[5] [Feb 16 14:13:29] could not find /dev/nvme0n11 - retry (opsisetuplib.py|134)
[5] [Feb 16 14:13:31] could not find /dev/nvme0n11 - retry (opsisetuplib.py|134)
[7] [Feb 16 14:13:31] Forcing kernel to reread the partitiontable again (opsisetuplib.py|136)
[5] [Feb 16 14:13:33] could not find /dev/nvme0n11 - retry (opsisetuplib.py|134)
[5] [Feb 16 14:13:35] could not find /dev/nvme0n11 - retry (opsisetuplib.py|134)
[5] [Feb 16 14:13:37] could not find /dev/nvme0n11 - retry (opsisetuplib.py|134)
[5] [Feb 16 14:13:39] could not find /dev/nvme0n11 - retry (opsisetuplib.py|134)
[3] [Feb 16 14:13:41] could not find /dev/nvme0n11 - giving up (opsisetuplib.py|144)
[2] [Feb 16 14:13:42] Traceback: (Logger.py|757)
[2] [Feb 16 14:13:42]   File "/usr/local/bin/master.py", line 1471, in <module>
    execfile(actionScript)
 (Logger.py|757)
[2] [Feb 16 14:13:42]   File "/tmp/setup.py", line 570, in <module>
    createPartitionEx("system", systemPartitionNumber, systemPartitionLabel, 0, systemPartitionSizeM, gptAutoAppend = True, boot = False, gptAttribute = "63" , useGpt = useGpt, diskDevice = disk.device, fileSystem = "ntfs", gptFileSystem="0700")
 (Logger.py|757)
[2] [Feb 16 14:13:42]   File "/tmp/opsisetuplib.py", line 193, in createPartitionEx
    testPartitionEx(diskDevice, partitionNumber , useGpt )
 (Logger.py|757)
[2] [Feb 16 14:13:42]   File "/tmp/opsisetuplib.py", line 146, in testPartitionEx
    raise Exception(u"Error checking %s. partition" % (partitionDevicePath))
 (Logger.py|757)
[2] [Feb 16 14:13:42]      ==>>> Error checking /dev/nvme0n11. partition (master.py|1519)
[7] [Feb 16 14:13:42] Backend: <JSONRPCBackend(host=u'***.***.***.120', deflate=False)> (master.py|1522)
[7] [Feb 16 14:13:42] ProductId: win10-x64 (master.py|1523)
[7] [Feb 16 14:13:42] ClientId: ****.******.net (master.py|1524)
[7] [Feb 16 14:13:42] ProductOnClient: <ProductOnClient(clientId=******.*******.net', productId=u'win10-x64', installationStatus=u'unknown', actionRequest=u'none')> (master.py|1525)
[7] [Feb 16 14:13:42] Executing jsonrpc method 'productOnClient_updateObjects' on host u'***.***.***.120' (JSONRPC.py|115)
[7] [Feb 16 14:13:42] Posting request... (JSONRPC.py|713)
[7] [Feb 16 14:13:42] Starting new HTTPS connection (0) to ***.***.***.120:4447 (HTTP.py|648)
[7] [Feb 16 14:13:42] Connection established to: ***.***.***.120 (HTTP.py|650)
[7] [Feb 16 14:13:42] Closing connection: <httplib.HTTPSConnection instance at 0x7f4a12f22950> (HTTP.py|569)
[7] [Feb 16 14:13:42] Content-Type: gzip-application/json;charset=utf-8, Content-Encoding: deflate (JSONRPC.py|730)
[7] [Feb 16 14:13:42] Expecting deflated data from server (backwards compatible) (JSONRPC.py|738)
[5] [Feb 16 14:13:42] Writing log to service (master.py|1546)
Hat jemand eine Idee, wodran das liegt?
Wir haben des weiteren festgestellt, das es an scheint auch Unterschiede bei der G5 Generation gibt.
Die Notebooks mit einer SanDisk SSD Lassen sich Problemlos bespielen. Das betroffene Notebook in diesem Fall hat eine SSD von Intel drin.

Vielen Dank.
Benutzeravatar
n.wenselowski
Ex-uib-Team
Beiträge: 3194
Registriert: 04 Apr 2013, 12:15

Re: HP ProBook 450G5

Beitrag von n.wenselowski »

Hi,

welche Version von opsi-linux-bootimage wird verwendet?
Bzgl. nvme gibt es eine Reihe von Posts hier im Forum und ich meine mich zu erinneren, dass es mit aktuelleren Bootimages (evtl. aus Testing nehmen) funktioniert.


Viele Grüße

Niko

Code: Alles auswählen

import OPSI
reneschmidt
Beiträge: 34
Registriert: 04 Aug 2015, 18:49

Re: HP ProBook 450G5

Beitrag von reneschmidt »

Hallo Niko,

Aktuell wir die Version 20170508-1 als PXE Produkt verwendet.

Zusätzlich habe ich noch die Boot CDs:
20170502
20171129
20180108
20180123

probiert. Bei allen erhalte ich den selben Fehler.
Mit dem PXE Paket aus Testing (dort liegt aktuell die 20171012) habe ich es nicht probiert, da die Boot CDs ja neuer waren.
Kann der Fehler evtl nicht auch in der setup.py liegen. Dort wird ja der Name für das Laufwerk zusammengesetzt und ein falscher zurück gegeben. Normalerweise ist das ja sda in diesem Fall aber nvme0n1 als Gerät. Wenn ich mir die Partitionierung ansehe, heißt das Patition nicht, wie von OPSI im Fehler angegeben nvme0n11 sonder nvme0n1p1

Wir verwenden die setup.py aus dem 4.0.6

Nachtrag:
ich muss mich einmal korrigieren.
Es geht nicht um die setup.py sondern um die opsisetuplib.py.
Dort scheint es Probleme mit dem Aufbau des Laufwerks in der Funktion getPartitionDevicePath (Zeil 103) zu geben.
Ich verstehe es so, das das Script davon ausgeht, das am ende immer eine z.b. 1 steht und nicht ein p1
Benutzeravatar
m.radtke
uib-Team
Beiträge: 1517
Registriert: 10 Jun 2015, 12:19

Re: HP ProBook 450G5

Beitrag von m.radtke »

Hi

Welche Version hat denn euer Netboot Produkt?

Die opsisetuplib.py kommt mit dem netboot Produkt

Gruß
Mathias
Kein Support per DM!
_________________________
opsi support - http://www.uib.de/
For productive opsi installations we recommend support contracts.
reneschmidt
Beiträge: 34
Registriert: 04 Aug 2015, 18:49

Re: HP ProBook 450G5

Beitrag von reneschmidt »

Hallo Mathias,

das Netboot Produkt hat die Version 4.0.6.1 (Windows 10 x64)

Viele Grüße
Benutzeravatar
m.radtke
uib-Team
Beiträge: 1517
Registriert: 10 Jun 2015, 12:19

Re: HP ProBook 450G5

Beitrag von m.radtke »

Hi
Dannn würde ich Mal sagen daß ihr euren Server aktualisiert.der Support von nvme Geräten kam mit 4.0.7.1-5

Gruß
Mathias
Kein Support per DM!
_________________________
opsi support - http://www.uib.de/
For productive opsi installations we recommend support contracts.
reneschmidt
Beiträge: 34
Registriert: 04 Aug 2015, 18:49

Re: HP ProBook 450G5

Beitrag von reneschmidt »

Vielen Dank.
Es sieht so aus, als ob es mit der 4.0.7 funktioniert
Antworten