So, ich habe einfach die 200 letzten Zeilen des boot-logs gepostet.
Wenn ich das Log richtig interpretiere, habe ich zwei Installationsversuche gepostet.
Ich komme erst am Dienstag wieder zum Kunden und kann testen und probieren.
Aufgefallen ist mir, dass ein LVM gefunden wurde. Das habe ich auch in Logs anderer Server gefunden (betreue noch 8 weitere Netzwerke mit OPSI), dort war es aber kein Problem.
Code: Alles auswählen
[6] [Apr 08 12:55:51] Executing: /sbin/blkid -o value -s TYPE /dev/sda1 (Posix.py|759)
[6] [Apr 08 12:55:51] Using encoding 'ANSI_X3.4-1968' (Posix.py|792)
[7] [Apr 08 12:55:51] >>> LVM2_member (Posix.py|836)
[7] [Apr 08 12:55:51] Exit code: 0 (Posix.py|843)
[7] [Apr 08 12:55:51] Found filesystem: LVM2_member with blkid tool, using now this filesystemtype. (Posix.py|1491)
Ich stelle mir die Frage, warum sda1 member eines LVM2 sein soll.
Das konnte ich vor Ort noch nicht prüfen.
Code: Alles auswählen
[5] [Apr 08 12:55:49] unrecognized partition table type, writing empty partitiontable (Posix.py|1416)
[7] [Apr 08 12:55:49] Command 'echo' found at: '/bin/echo' (Posix.py|701)
[6] [Apr 08 12:55:49] Executing: /bin/echo -e "0,0
" | /sbin/sfdisk -L --no-reread -D /dev/sda (Posix.py|759)
[6] [Apr 08 12:55:49] Using encoding 'ANSI_X3.4-1968' (Posix.py|792)
[7] [Apr 08 12:55:49] >>> (Posix.py|836)
[7] [Apr 08 12:55:49] >>> Disk /dev/sda: 19457 cylinders, 255 heads, 63 sectors/track (Posix.py|836)
[7] [Apr 08 12:55:49] >>> Old situation: (Posix.py|836)
[7] [Apr 08 12:55:49] >>> New situation: (Posix.py|836)
[7] [Apr 08 12:55:49] >>> Units = cylinders of 8225280 bytes, blocks of 1024 bytes, counting from 0 (Posix.py|836)
[7] [Apr 08 12:55:49] >>> (Posix.py|836)
[7] [Apr 08 12:55:49] >>> Device Boot Start End #cyls #blocks Id System (Posix.py|836)
[7] [Apr 08 12:55:49] >>> /dev/sda1 0 - 0 0 0 Empty (Posix.py|836)
[7] [Apr 08 12:55:49] >>> /dev/sda2 0 - 0 0 0 Empty (Posix.py|836)
[7] [Apr 08 12:55:49] >>> /dev/sda3 0 - 0 0 0 Empty (Posix.py|836)
[7] [Apr 08 12:55:49] >>> /dev/sda4 0 - 0 0 0 Empty (Posix.py|836)
[7] [Apr 08 12:55:49] >>> (Posix.py|836)
[7] [Apr 08 12:55:49] >>> sfdisk: ERROR: sector 0 does not have an msdos signature (Posix.py|836)
[7] [Apr 08 12:55:49] >>> /dev/sda: unrecognized partition table type (Posix.py|836)
[7] [Apr 08 12:55:49] >>> No partitions found (Posix.py|836)
[7] [Apr 08 12:55:49] >>> Warning: no primary partition is marked bootable (active) (Posix.py|836)
[7] [Apr 08 12:55:49] >>> This does not matter for LILO, but the DOS MBR will not boot this disk. (Posix.py|836)
[7] [Apr 08 12:55:49] >>> Successfully wrote the new partition table (Posix.py|836)
[7] [Apr 08 12:55:49] >>> (Posix.py|836)
[7] [Apr 08 12:55:49] >>> Re-reading the partition table ... (Posix.py|836)
[7] [Apr 08 12:55:49] >>> BLKRRPART: Device or resource busy (Posix.py|836)
[7] [Apr 08 12:55:49] >>> The command to re-read the partition table failed. (Posix.py|836)
[7] [Apr 08 12:55:49] >>> Run partprobe(8), kpartx(8) or reboot your system now, (Posix.py|836)
[7] [Apr 08 12:55:49] >>> before using mkfs (Posix.py|836)
[7] [Apr 08 12:55:49] >>> If you created or changed a DOS partition, /dev/foo7, say, then use dd(1) (Posix.py|836)
[7] [Apr 08 12:55:49] >>> to zero the first 512 bytes: dd if=/dev/zero of=/dev/foo7 bs=512 count=1 (Posix.py|836)
[7] [Apr 08 12:55:49] >>> (See fdisk(8).) (Posix.py|836)
[7] [Apr 08 12:55:49] Exit code: 1 (Posix.py|843)
[6] [Apr 08 12:55:49] Executing: /sbin/sfdisk -L --no-reread -l /dev/sda (Posix.py|759)
[6] [Apr 08 12:55:49] Using encoding 'ANSI_X3.4-1968' (Posix.py|792)
[7] [Apr 08 12:55:49] >>> (Posix.py|836)
[7] [Apr 08 12:55:49] >>> Disk /dev/sda: 19457 cylinders, 255 heads, 63 sectors/track (Posix.py|836)
[7] [Apr 08 12:55:49] >>> Units = cylinders of 8225280 bytes, blocks of 1024 bytes, counting from 0 (Posix.py|836)
[7] [Apr 08 12:55:49] >>> (Posix.py|836)
[7] [Apr 08 12:55:49] >>> Device Boot Start End #cyls #blocks Id System (Posix.py|836)
[7] [Apr 08 12:55:49] >>> /dev/sda1 0 - 0 0 0 Empty (Posix.py|836)
[7] [Apr 08 12:55:49] >>> /dev/sda2 0 - 0 0 0 Empty (Posix.py|836)
[7] [Apr 08 12:55:49] >>> /dev/sda3 0 - 0 0 0 Empty (Posix.py|836)
[7] [Apr 08 12:55:49] >>> /dev/sda4 0 - 0 0 0 Empty (Posix.py|836)
[7] [Apr 08 12:55:49] Exit code: 0 (Posix.py|843)
[6] [Apr 08 12:55:49] Total cylinders of disk '/dev/sda': 19457, 8225280 bytes per cylinder (Posix.py|1461)
[6] [Apr 08 12:55:49] Executing: /sbin/sfdisk -L --no-reread -uS -l /dev/sda (Posix.py|759)
[6] [Apr 08 12:55:49] Using encoding 'ANSI_X3.4-1968' (Posix.py|792)
[7] [Apr 08 12:55:49] >>> (Posix.py|836)
[7] [Apr 08 12:55:49] >>> Disk /dev/sda: 19457 cylinders, 255 heads, 63 sectors/track (Posix.py|836)
[7] [Apr 08 12:55:49] >>> Units = sectors of 512 bytes, counting from 0 (Posix.py|836)
[7] [Apr 08 12:55:49] >>> (Posix.py|836)
[7] [Apr 08 12:55:49] >>> Device Boot Start End #sectors Id System (Posix.py|836)
[7] [Apr 08 12:55:49] >>> /dev/sda1 0 - 0 0 Empty (Posix.py|836)
[7] [Apr 08 12:55:49] >>> /dev/sda2 0 - 0 0 Empty (Posix.py|836)
[7] [Apr 08 12:55:49] >>> /dev/sda3 0 - 0 0 Empty (Posix.py|836)
[7] [Apr 08 12:55:49] >>> /dev/sda4 0 - 0 0 Empty (Posix.py|836)
[7] [Apr 08 12:55:49] Exit code: 0 (Posix.py|843)
[6] [Apr 08 12:55:49] Total sectors of disk '/dev/sda': 312581808, 512 bytes per cylinder (Posix.py|1582)
[7] [Apr 08 12:55:49] Executing jsonrpc method 'backend_setOptions' on host 10.8.11.10 (JSONRPC.py|115)
[7] [Apr 08 12:55:49] Posting request... (JSONRPC.py|706)
[7] [Apr 08 12:55:49] Starting new HTTPS connection (0) to 10.8.11.10:4447 (HTTP.py|587)
[7] [Apr 08 12:55:49] Connection established to: 10.8.11.10 (HTTP.py|600)
[7] [Apr 08 12:55:49] Failed to get peer cert: 'NoneType' object has no attribute 'getpeercert' (HTTP.py|191)
[7] [Apr 08 12:55:49] Closing connection: <httplib.HTTPSConnection instance at 0xb5a5c32c> (HTTP.py|530)
[7] [Apr 08 12:55:49] Content-Type: gzip-application/json;charset=utf-8, Content-Encoding: deflate (JSONRPC.py|723)
[7] [Apr 08 12:55:49] Expecting deflated data from server (backwards compatible) (JSONRPC.py|731)
[7] [Apr 08 12:55:49] Executing jsonrpc method 'productOnClient_getObjects' on host 10.8.11.10 (JSONRPC.py|115)
[7] [Apr 08 12:55:49] Posting request... (JSONRPC.py|706)
[7] [Apr 08 12:55:49] Starting new HTTPS connection (0) to 10.8.11.10:4447 (HTTP.py|587)
[7] [Apr 08 12:55:49] Connection established to: 10.8.11.10 (HTTP.py|600)
[7] [Apr 08 12:55:49] Failed to get peer cert: 'NoneType' object has no attribute 'getpeercert' (HTTP.py|191)
[7] [Apr 08 12:55:49] Closing connection: <httplib.HTTPSConnection instance at 0xb5bc7fec> (HTTP.py|530)
[7] [Apr 08 12:55:49] Content-Type: gzip-application/json;charset=utf-8, Content-Encoding: deflate (JSONRPC.py|723)
[7] [Apr 08 12:55:49] Expecting deflated data from server (backwards compatible) (JSONRPC.py|731)
[7] [Apr 08 12:55:49] Executing jsonrpc method 'productOnClient_deleteObjects' on host 10.8.11.10 (JSONRPC.py|115)
[7] [Apr 08 12:55:49] Posting request... (JSONRPC.py|706)
[7] [Apr 08 12:55:49] Starting new HTTPS connection (0) to 10.8.11.10:4447 (HTTP.py|587)
[7] [Apr 08 12:55:49] Connection established to: 10.8.11.10 (HTTP.py|600)
[7] [Apr 08 12:55:49] Failed to get peer cert: 'NoneType' object has no attribute 'getpeercert' (HTTP.py|191)
[7] [Apr 08 12:55:49] Closing connection: <httplib.HTTPSConnection instance at 0xb5a5c30c> (HTTP.py|530)
[7] [Apr 08 12:55:49] Content-Type: gzip-application/json;charset=utf-8, Content-Encoding: deflate (JSONRPC.py|723)
[7] [Apr 08 12:55:49] Expecting deflated data from server (backwards compatible) (JSONRPC.py|731)
[6] [Apr 08 12:55:49] Creating partition on '/dev/sda': number: 1, type 'primary', filesystem 'fat32', start: 2048 sec, end: 312581807 sec. (Posix.py|2188)
[7] [Apr 08 12:55:49] Writing partition table to disk /dev/sda (Posix.py|1585)
[7] [Apr 08 12:55:49] number: 1, start: 1 MB (2048 sec), end: 160041 MB (312581807 sec), size: 160040 MB (312579760 sec), type: c, fs: fat32, boot: True (Posix.py|1600)
[7] [Apr 08 12:55:49] Partition 2 not found: Partition 2 does not exist (Posix.py|1616)
[7] [Apr 08 12:55:49] Partition 3 not found: Partition 3 does not exist (Posix.py|1616)
[7] [Apr 08 12:55:49] Partition 4 not found: Partition 4 does not exist (Posix.py|1616)
[6] [Apr 08 12:55:49] Executing: /bin/echo -e "2048,312579760,c,*
0,0
0,0
0,0
" | /sbin/sfdisk -L --no-reread -uS -f /dev/sda (Posix.py|759)
[6] [Apr 08 12:55:49] Using encoding 'ANSI_X3.4-1968' (Posix.py|792)
[7] [Apr 08 12:55:49] >>> (Posix.py|836)
[7] [Apr 08 12:55:49] >>> Disk /dev/sda: 19457 cylinders, 255 heads, 63 sectors/track (Posix.py|836)
[7] [Apr 08 12:55:49] >>> Old situation: (Posix.py|836)
[7] [Apr 08 12:55:49] >>> Units = sectors of 512 bytes, counting from 0 (Posix.py|836)
[7] [Apr 08 12:55:49] >>> (Posix.py|836)
[7] [Apr 08 12:55:49] >>> Device Boot Start End #sectors Id System (Posix.py|836)
[7] [Apr 08 12:55:49] >>> /dev/sda1 0 - 0 0 Empty (Posix.py|836)
[7] [Apr 08 12:55:49] >>> /dev/sda2 0 - 0 0 Empty (Posix.py|836)
[7] [Apr 08 12:55:49] >>> /dev/sda3 0 - 0 0 Empty (Posix.py|836)
[7] [Apr 08 12:55:49] >>> /dev/sda4 0 - 0 0 Empty (Posix.py|836)
[7] [Apr 08 12:55:49] >>> New situation: (Posix.py|836)
[7] [Apr 08 12:55:49] >>> Units = sectors of 512 bytes, counting from 0 (Posix.py|836)
[7] [Apr 08 12:55:49] >>> (Posix.py|836)
[7] [Apr 08 12:55:49] >>> Device Boot Start End #sectors Id System (Posix.py|836)
[7] [Apr 08 12:55:49] >>> /dev/sda1 * 2048 312581807 312579760 c W95 FAT32 (LBA) (Posix.py|836)
[7] [Apr 08 12:55:49] >>> /dev/sda2 0 - 0 0 Empty (Posix.py|836)
[7] [Apr 08 12:55:49] >>> /dev/sda3 0 - 0 0 Empty (Posix.py|836)
[7] [Apr 08 12:55:49] >>> /dev/sda4 0 - 0 0 Empty (Posix.py|836)
[7] [Apr 08 12:55:49] >>> Successfully wrote the new partition table (Posix.py|836)
[7] [Apr 08 12:55:49] >>> (Posix.py|836)
[7] [Apr 08 12:55:49] >>> Re-reading the partition table ... (Posix.py|836)
[7] [Apr 08 12:55:49] >>> BLKRRPART: Device or resource busy (Posix.py|836)
[7] [Apr 08 12:55:49] >>> The command to re-read the partition table failed. (Posix.py|836)
[7] [Apr 08 12:55:49] >>> Run partprobe(8), kpartx(8) or reboot your system now, (Posix.py|836)
[7] [Apr 08 12:55:49] >>> before using mkfs (Posix.py|836)
[7] [Apr 08 12:55:49] >>> If you created or changed a DOS partition, /dev/foo7, say, then use dd(1) (Posix.py|836)
[7] [Apr 08 12:55:49] >>> to zero the first 512 bytes: dd if=/dev/zero of=/dev/foo7 bs=512 count=1 (Posix.py|836)
[7] [Apr 08 12:55:49] >>> (See fdisk(8).) (Posix.py|836)
[7] [Apr 08 12:55:49] Exit code: 1 (Posix.py|843)
[6] [Apr 08 12:55:49] Forcing kernel to reread partition table of '/dev/sda'. (Posix.py|1648)
[6] [Apr 08 12:55:49] Executing: /sbin/partprobe /dev/sda (Posix.py|759)
[6] [Apr 08 12:55:49] Using encoding 'ANSI_X3.4-1968' (Posix.py|792)
[7] [Apr 08 12:55:49] Exit code: 0 (Posix.py|843)
[6] [Apr 08 12:55:51] Executing: /sbin/sfdisk -L --no-reread -s -uB /dev/sda (Posix.py|759)
[6] [Apr 08 12:55:51] Using encoding 'ANSI_X3.4-1968' (Posix.py|792)
[7] [Apr 08 12:55:51] >>> 156290904 (Posix.py|836)
[7] [Apr 08 12:55:51] Exit code: 0 (Posix.py|843)
[6] [Apr 08 12:55:51] Size of disk '/dev/sda': 160041885696 Byte / 152627 MB (Posix.py|1407)
[6] [Apr 08 12:55:51] Executing: /sbin/sfdisk -L --no-reread -l /dev/sda (Posix.py|759)
[6] [Apr 08 12:55:51] Using encoding 'ANSI_X3.4-1968' (Posix.py|792)
[7] [Apr 08 12:55:51] >>> (Posix.py|836)
[7] [Apr 08 12:55:51] >>> Disk /dev/sda: 19457 cylinders, 255 heads, 63 sectors/track (Posix.py|836)
[7] [Apr 08 12:55:51] >>> Units = cylinders of 8225280 bytes, blocks of 1024 bytes, counting from 0 (Posix.py|836)
[7] [Apr 08 12:55:51] >>> (Posix.py|836)
[7] [Apr 08 12:55:51] >>> Device Boot Start End #cyls #blocks Id System (Posix.py|836)
[7] [Apr 08 12:55:51] >>> /dev/sda1 * 0+ 19457- 19458- 156289880 c W95 FAT32 (LBA) (Posix.py|836)
[7] [Apr 08 12:55:51] >>> /dev/sda2 0 - 0 0 0 Empty (Posix.py|836)
[7] [Apr 08 12:55:51] >>> /dev/sda3 0 - 0 0 0 Empty (Posix.py|836)
[7] [Apr 08 12:55:51] >>> /dev/sda4 0 - 0 0 0 Empty (Posix.py|836)
[7] [Apr 08 12:55:51] Exit code: 0 (Posix.py|843)
[6] [Apr 08 12:55:51] Total cylinders of disk '/dev/sda': 19457, 8225280 bytes per cylinder (Posix.py|1461)
[7] [Apr 08 12:55:51] Trying using Blkid (Posix.py|1484)
[6] [Apr 08 12:55:51] Executing: /sbin/blkid -o value -s TYPE /dev/sda1 (Posix.py|759)
[6] [Apr 08 12:55:51] Using encoding 'ANSI_X3.4-1968' (Posix.py|792)
[7] [Apr 08 12:55:51] >>> LVM2_member (Posix.py|836)
[7] [Apr 08 12:55:51] Exit code: 0 (Posix.py|843)
[7] [Apr 08 12:55:51] Found filesystem: LVM2_member with blkid tool, using now this filesystemtype. (Posix.py|1491)
[7] [Apr 08 12:55:51] Partition found =>>> number: 1, start: 0 MB (0 cyl), end: 152633 MB (19457 cyl), size: 152633 MB (19458 cyl), type: c, fs: LVM2_member, boot: True (Posix.py|1526)
[7] [Apr 08 12:55:51] Waiting for device '/dev/sda1' to appear (Posix.py|1531)
[7] [Apr 08 12:55:51] Device '/dev/sda1' found (Posix.py|1539)
[6] [Apr 08 12:55:51] Executing: /sbin/sfdisk -L --no-reread -uS -l /dev/sda (Posix.py|759)
[6] [Apr 08 12:55:51] Using encoding 'ANSI_X3.4-1968' (Posix.py|792)
[7] [Apr 08 12:55:51] >>> (Posix.py|836)
[7] [Apr 08 12:55:51] >>> Disk /dev/sda: 19457 cylinders, 255 heads, 63 sectors/track (Posix.py|836)
[7] [Apr 08 12:55:51] >>> Units = sectors of 512 bytes, counting from 0 (Posix.py|836)
[7] [Apr 08 12:55:51] >>> (Posix.py|836)
[7] [Apr 08 12:55:51] >>> Device Boot Start End #sectors Id System (Posix.py|836)
[7] [Apr 08 12:55:51] >>> /dev/sda1 * 2048 312581807 312579760 c W95 FAT32 (LBA) (Posix.py|836)
[7] [Apr 08 12:55:51] >>> /dev/sda2 0 - 0 0 Empty (Posix.py|836)
[7] [Apr 08 12:55:51] >>> /dev/sda3 0 - 0 0 Empty (Posix.py|836)
[7] [Apr 08 12:55:51] >>> /dev/sda4 0 - 0 0 Empty (Posix.py|836)
[7] [Apr 08 12:55:51] Exit code: 0 (Posix.py|843)
[6] [Apr 08 12:55:51] Total sectors of disk '/dev/sda': 312581808, 512 bytes per cylinder (Posix.py|1582)
[7] [Apr 08 12:55:51] Partition sector values =>>> number: 1, start: 2048 sec, end: 312581807 sec, size: 312579760 sec (Posix.py|1572)
[6] [Apr 08 12:55:51] Creating filesystem 'fat32' on '/dev/sda1'. (Posix.py|2325)
[6] [Apr 08 12:55:51] Executing: mkfs.vfat -F 32 /dev/sda1 (Posix.py|759)
[6] [Apr 08 12:55:51] Using encoding 'ANSI_X3.4-1968' (Posix.py|792)
[7] [Apr 08 12:55:51] >>> mkfs.fat 3.0.26 (2014-03-07) (Posix.py|836)
[7] [Apr 08 12:55:51] >>> mkfs.vfat: unable to open /dev/sda1: Device or resource busy (Posix.py|836)
[7] [Apr 08 12:55:51] Exit code: 1 (Posix.py|843)
[2] [Apr 08 12:55:52] Traceback: (Logger.py|765)
[2] [Apr 08 12:55:52] line 1461 in '<module>' in file '/usr/local/bin/master.py' (Logger.py|765)
[2] [Apr 08 12:55:52] line 95 in '<module>' in file '/tmp/setup.py' (Logger.py|765)
[2] [Apr 08 12:55:52] line 2354 in 'createFilesystem' in file '/usr/lib/python2.7/dist-packages/OPSI/System/Posix.py' (Logger.py|765)
[2] [Apr 08 12:55:52] line 850 in 'execute' in file '/usr/lib/python2.7/dist-packages/OPSI/System/Posix.py' (Logger.py|765)
[2] [Apr 08 12:55:52] ==>>> Command 'mkfs.vfat -F 32 /dev/sda1' failed (1):
mkfs.fat 3.0.26 (2014-03-07)
mkfs.vfat: unable to open /dev/sda1: Device or resource busy (master.py|1509)
[7] [Apr 08 12:55:52] Backend: <JSONRPCBackend(host=u'10.8.11.10', deflate=False)> (master.py|1512)
[7] [Apr 08 12:55:52] ProductId: winxppro (master.py|1513)
[7] [Apr 08 12:55:52] ClientId: win02.example.local (master.py|1514)
[7] [Apr 08 12:55:52] ProductOnClient: <ProductOnClient(clientId=u'win02.example.local', productId=u'winxppro', installationStatus=u'unknown', actionRequest=u'none')> (master.py|1515)
[6] [Apr 08 12:55:52] Updating productOnClient: {'actionProgress': u'', 'actionResult': u'failed', 'clientId': u'win02.example.local', 'modificationTime': None, 'actionRequest': u'none', 'targetConfiguration': None, 'productVersion': None, 'productType': u'NetbootProduct', 'type': u'ProductOnClient', 'lastAction': None, 'packageVersion': None, 'actionSequence': None, 'installationStatus': u'unknown', 'productId': u'winxppro'} (master.py|1526)
[7] [Apr 08 12:55:52] Executing jsonrpc method 'productOnClient_updateObjects' on host 10.8.11.10 (JSONRPC.py|115)
[7] [Apr 08 12:55:52] Posting request... (JSONRPC.py|706)
[7] [Apr 08 12:55:52] Starting new HTTPS connection (0) to 10.8.11.10:4447 (HTTP.py|587)
[7] [Apr 08 12:55:52] Connection established to: 10.8.11.10 (HTTP.py|600)
[7] [Apr 08 12:55:52] Failed to get peer cert: 'NoneType' object has no attribute 'getpeercert' (HTTP.py|191)
[7] [Apr 08 12:55:52] Closing connection: <httplib.HTTPSConnection instance at 0xb5b0b20c> (HTTP.py|530)
[7] [Apr 08 12:55:52] Content-Type: gzip-application/json;charset=utf-8, Content-Encoding: deflate (JSONRPC.py|723)
[7] [Apr 08 12:55:52] Expecting deflated data from server (backwards compatible) (JSONRPC.py|731)
[5] [Apr 08 12:55:52] Writing log to service (master.py|1536)