Probleme bei Client Installation

[polymorth]

Hallo zusammen,

ich habe mir vor kurzem Opsi heruntergeladen und wollte dies jetzt mal testen, die Installation war recht einfach alles nach dem Opsi Handbuch durchgeführt. Jetzt wollte ich auf meinem ersten Client eine XP Installation durchführen und alles lief recht reibungslos. Es erscheint ein blauer Bildschirm wo dann steht vorbereiten der XP installation und dann auf einmal kommt eine Fehlermeldung die lautet: fehler bei der XP installation No such file or directory /mnt/opsi/install/winxppro/i386.

Mich wundert dies, da man ja den i386 Ordner von der XP-CD laut Handbuch in das Verzeichnis /opt/pcbin/install/winxxpro/i386 einfügen soll. Habe dann mal dieses Verzeichnis laut Fehlermeldung angelegt, aber danach erscheint immer noch die gleiche Fehlermeldung.

Achso noch eine Kleinigkeit ,bei der Hardwareerkennung "hwinvent" taucht nach einer weile auf dem blauen Bildschirm eine Fehlermeldung auf die mir sagt das unter dieser IP Adresse kein Server zu finden ist, dort steht mir eine unbekannte IP Adresse die ich auch nicht vergeben habe, aber man hat ja dort dann die Möglichkeit seine richtige IP vom Server + Benutzer und Passwort einzutragen danach läuft die Hardwareerkennung auch ohne Probleme durch. Kann man diese IP Adresse irgendwo ändern, so das man dort nicht immer die IP Adresse eintragen muß?

Ich würde mich für ein paar Tips sehr freuen

liebe grüße ralf

[d.oertel]

Hallo Ralf,

das i386 Verzeichnis muss wie im Handbuch beschrieben auf dem Server unter /opt/pcbin/install/winxppro/i386 liegen.
Das Verrzeichnis /opt/pcbin wird als share freigegeben und vom bootimage unter /mnt/opsi gemountet.
Wenn das bootimage das i386 Verzeichnis nicht findet, so stimmen evtl. die Rechte nicht (siehe Installationshandbuch)

Was hwinvent betrifft:
unter welcher IP-Nummer sucht er den Server ?
Auf dem Server müsste unter /var/log/opsi/bootimage ein log von dem Client existieren.
Bitte mal posten.

gruss
detlef oertel

[polymorth]

Hallo Herr Oertel,

also ich habe meinen Opsi-Server die IP 192.168.2.100 gegeben DNS ist 192.168.2.1 genauso der gateway 192.168.2.1

hier die Logdatei von dem Client:

Jul 06 17:40:54 [opsiinit] opsi init script started
Jul 06 17:40:54 [opsiinit] getBootParam(no_dhcp): cmdline: lang=de video=vesa:ywrap,mtrr pckey=******************************** service=192.168.4.40 vga=791 initrd=miniroot.gz reboot=b noapic init=/etc/init quiet hn=xp2 ramdisk_size=175880 product=hwinvent splash BOOT_IMAGE=install
Jul 06 17:40:54 [opsiinit] boot param nodhcp=0
Jul 06 17:40:54 [opsiinit] getBootParam(hn): cmdline: lang=de video=vesa:ywrap,mtrr pckey=******************************** service=192.168.4.40 vga=791 initrd=miniroot.gz reboot=b noapic init=/etc/init quiet hn=xp2 ramdisk_size=175880 product=hwinvent splash BOOT_IMAGE=install
Jul 06 17:40:54 [opsiinit] boot param hn=xp2
Jul 06 17:40:54 [opsiinit] getBootParam(lang): cmdline: lang=de video=vesa:ywrap,mtrr pckey=******************************** service=192.168.4.40 vga=791 initrd=miniroot.gz reboot=b noapic init=/etc/init quiet hn=xp2 ramdisk_size=175880 product=hwinvent splash BOOT_IMAGE=install
Jul 06 17:40:54 [opsiinit] boot param lang=de
Jul 06 17:40:54 [opsiinit] loading keymap de
Jul 06 17:40:54 [opsiinit] setting language environment (LANG=de_DE.UTF8, LANGUAGE=de, LC_ALL=de_DE.UTF8)
Jul 06 17:40:54 [opsiinit] getNetworkDevices(): link forced
Jul 06 17:40:54 [opsiinit] getNetworkDevices(): device(s) found: eth0, device(s) with link:
Jul 06 17:40:54 [opsiinit] getNetworkDevices(): no devices with link found, returning error
Jul 06 17:40:54 [opsiinit] no devices found, sleeping 3 seconds
Jul 06 17:40:56 [info] Locale not found: name 'LOCALE_DIR' is not defined
Jul 06 17:40:56 [info] Locale not found: [Errno 2] No translation file found for domain: 'product'
Jul 06 17:40:56 [debug] Executing: echo 0 > /proc/sys/kernel/printk
Jul 06 17:40:56 [debug] Exit code: 0
Jul 06 17:40:56 [debug] Command 'tty' found: '/usr/bin/tty'
Jul 06 17:40:56 [debug] Executing: setterm -msg off -blank 0 -powersave off < /dev/tty6 > /dev/tty6
Jul 06 17:40:57 [debug] Exit code: 0
Jul 06 17:40:57 [info] Waiting for init scripts to finish up (0)
Jul 06 17:40:58 [opsiinit] getNetworkDevices(): link forced
Jul 06 17:40:58 [info] Waiting for init scripts to finish up (1)
Jul 06 17:40:58 [opsiinit] getNetworkDevices(): device(s) found: eth0, device(s) with link:
Jul 06 17:40:58 [opsiinit] getNetworkDevices(): no devices with link found, returning error
Jul 06 17:40:58 [opsiinit] no devices found, sleeping 3 seconds
Jul 06 17:40:59 [info] Waiting for init scripts to finish up (2)
Jul 06 17:41:00 [info] Waiting for init scripts to finish up (3)
Jul 06 17:41:01 [info] Waiting for init scripts to finish up (4)
Jul 06 17:41:01 [opsiinit] getNetworkDevices(): link forced
Jul 06 17:41:01 [opsiinit] getNetworkDevices(): device(s) found: eth0, device(s) with link:
Jul 06 17:41:01 [opsiinit] getNetworkDevices(): no devices with link found, returning error
Jul 06 17:41:01 [opsiinit] no devices found, sleeping 3 seconds
Jul 06 17:41:02 [info] Waiting for init scripts to finish up (5)
Jul 06 17:41:03 [info] Waiting for init scripts to finish up (6)
Jul 06 17:41:04 [info] Waiting for init scripts to finish up (7)
Jul 06 17:41:04 [opsiinit] getNetworkDevices(): device(s) found: eth0, device(s) with link:
Jul 06 17:41:04 [opsiinit] getNetworkDevices(): no devices with link found, returning eth0
Jul 06 17:41:04 [opsiinit] using dhcp, adding entry for device eth0 to /etc/network/interfaces
Jul 06 17:41:05 [info] Waiting for init scripts to finish up (8)
Jul 06 17:41:06 [info] Waiting for init scripts to finish up (9)
Jul 06 17:41:06 [opsiinit] Setting hostname to xp2 as supplied by cmdline
Jul 06 17:41:06 [opsiinit] opsi init script ended
Jul 06 17:41:07 [info] Waiting for init scripts to finish up (10)
Jul 06 17:41:08 [info] Waiting for init scripts to finish up (11)
Jul 06 17:41:09 [info] Waiting for init scripts to finish up (12)
Jul 06 17:41:10 [debug] Executing: dmesg
Jul 06 17:41:10 [debug] ->>> Linux version 2.6.25.4 (root@pcbon14) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP PREEMPT Wed Jun 4 14:04:51 UTC 2008
Jul 06 17:41:10 [debug] ->>> BIOS-provided physical RAM map:
Jul 06 17:41:10 [debug] ->>> BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
Jul 06 17:41:10 [debug] ->>> BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
Jul 06 17:41:10 [debug] ->>> BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
Jul 06 17:41:10 [debug] ->>> BIOS-e820: 0000000000100000 - 000000000fef0000 (usable)
Jul 06 17:41:10 [debug] ->>> BIOS-e820: 000000000fef0000 - 000000000feff000 (ACPI data)
Jul 06 17:41:10 [debug] ->>> BIOS-e820: 000000000feff000 - 000000000ff00000 (ACPI NVS)
Jul 06 17:41:10 [debug] ->>> BIOS-e820: 000000000ff00000 - 0000000010000000 (usable)
Jul 06 17:41:10 [debug] ->>> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
Jul 06 17:41:10 [debug] ->>> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
Jul 06 17:41:10 [debug] ->>> BIOS-e820: 00000000fffe0000 - 0000000100000000 (reserved)
Jul 06 17:41:10 [debug] ->>> 0MB HIGHMEM available.
Jul 06 17:41:10 [debug] ->>> 256MB LOWMEM available.
Jul 06 17:41:10 [debug] ->>> Scan SMP from c0000000 for 1024 bytes.
Jul 06 17:41:10 [debug] ->>> Scan SMP from c009fc00 for 1024 bytes.
Jul 06 17:41:10 [debug] ->>> Scan SMP from c00f0000 for 65536 bytes.
Jul 06 17:41:10 [debug] ->>> found SMP MP-table at [c00f6cd0] 000f6cd0
Jul 06 17:41:10 [debug] ->>> Entering add_active_range(0, 0, 65536) 0 entries of 256 used
Jul 06 17:41:10 [debug] ->>> Zone PFN ranges:
Jul 06 17:41:10 [debug] ->>> DMA 0 -> 4096
Jul 06 17:41:10 [debug] ->>> Normal 4096 -> 65536
Jul 06 17:41:10 [debug] ->>> HighMem 65536 -> 65536
Jul 06 17:41:10 [debug] ->>> Movable zone start PFN for each node
Jul 06 17:41:10 [debug] ->>> early_node_map[1] active PFN ranges
Jul 06 17:41:10 [debug] ->>> 0: 0 -> 65536
Jul 06 17:41:10 [debug] ->>> On node 0 totalpages: 65536
Jul 06 17:41:10 [debug] ->>> DMA zone: 32 pages used for memmap
Jul 06 17:41:10 [debug] ->>> DMA zone: 0 pages reserved
Jul 06 17:41:10 [debug] ->>> DMA zone: 4064 pages, LIFO batch:0
Jul 06 17:41:10 [debug] ->>> Normal zone: 480 pages used for memmap
Jul 06 17:41:10 [debug] ->>> Normal zone: 60960 pages, LIFO batch:15
Jul 06 17:41:10 [debug] ->>> HighMem zone: 0 pages used for memmap
Jul 06 17:41:10 [debug] ->>> Movable zone: 0 pages used for memmap
Jul 06 17:41:10 [debug] ->>> DMI present.
Jul 06 17:41:10 [debug] ->>> ACPI: RSDP 000F6C60, 0014 (r0 PTLTD )
Jul 06 17:41:10 [debug] ->>> ACPI: RSDT 0FEFAB68, 0030 (r1 PTLTD RSDT 6040000 LTP 0)
Jul 06 17:41:10 [debug] ->>> ACPI: FACP 0FEFEF14, 0074 (r1 INTEL 440BX 6040000 PTL F4240)
Jul 06 17:41:10 [debug] ->>> ACPI: DSDT 0FEFAB98, 437C (r1 PTLTD Custom 6040000 MSFT 100000D)
Jul 06 17:41:10 [debug] ->>> ACPI: FACS 0FEFFFC0, 0040
Jul 06 17:41:10 [debug] ->>> ACPI: APIC 0FEFEF88, 0050 (r1 PTLTD APIC 6040000 LTP 0)
Jul 06 17:41:10 [debug] ->>> ACPI: BOOT 0FEFEFD8, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
Jul 06 17:41:10 [debug] ->>> ACPI: PM-Timer IO Port: 0x1008
Jul 06 17:41:10 [debug] ->>> ACPI: Local APIC address 0xfee00000
Jul 06 17:41:10 [debug] ->>> ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Jul 06 17:41:10 [debug] ->>> Processor #0 15:3 APIC version 17
Jul 06 17:41:10 [debug] ->>> ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
Jul 06 17:41:10 [debug] ->>> ACPI: Skipping IOAPIC probe due to 'noapic' option.
Jul 06 17:41:10 [debug] ->>> Using ACPI for processor (LAPIC) configuration information
Jul 06 17:41:10 [debug] ->>> Intel MultiProcessor Specification v1.4
Jul 06 17:41:10 [debug] ->>> Virtual Wire compatibility mode.
Jul 06 17:41:10 [debug] ->>> OEM ID: INTEL Product ID: 440BX APIC at: 0xFEE00000
Jul 06 17:41:10 [debug] ->>> I/O APIC #1 Version 17 at 0xFEC00000.
Jul 06 17:41:10 [debug] ->>> Enabling APIC mode: Flat. Using 1 I/O APICs
Jul 06 17:41:10 [debug] ->>> Processors: 1
Jul 06 17:41:10 [debug] ->>> Allocating PCI resources starting at 20000000 (gap: 10000000:eec00000)
Jul 06 17:41:10 [debug] ->>> Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024
Jul 06 17:41:10 [debug] ->>> Kernel command line: lang=de video=vesa:ywrap,mtrr pckey=******************************** service=192.168.4.40 vga=791 initrd=miniroot.gz reboot=b noapic init=/etc/init quiet hn=xp2 ramdisk_size=175880 product=hwinvent splash BOOT_IMAGE=install
Jul 06 17:41:10 [debug] ->>> mapped APIC to ffffb000 (fee00000)
Jul 06 17:41:10 [debug] ->>> mapped IOAPIC to ffffa000 (fec00000)
Jul 06 17:41:10 [debug] ->>> Enabling fast FPU save and restore... done.
Jul 06 17:41:10 [debug] ->>> Enabling unmasked SIMD FPU exception support... done.
Jul 06 17:41:10 [debug] ->>> Initializing CPU#0
Jul 06 17:41:10 [debug] ->>> PID hash table entries: 1024 (order: 10, 4096 bytes)
Jul 06 17:41:10 [debug] ->>> Detected 3021.065 MHz processor.
Jul 06 17:41:10 [debug] ->>> Console: colour dummy device 80x25
Jul 06 17:41:10 [debug] ->>> console [tty0] enabled
Jul 06 17:41:10 [debug] ->>> Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Jul 06 17:41:10 [debug] ->>> Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Jul 06 17:41:10 [debug] ->>> Memory: 196952k/262144k available (2271k kernel code, 64592k reserved, 802k data, 352k init, 0k highmem)
Jul 06 17:41:10 [debug] ->>> virtual kernel memory layout:
Jul 06 17:41:10 [debug] ->>> fixmap : 0xffe14000 - 0xfffff000 (1964 kB)
Jul 06 17:41:10 [debug] ->>> pkmap : 0xff800000 - 0xffc00000 (4096 kB)
Jul 06 17:41:10 [debug] ->>> vmalloc : 0xd0800000 - 0xff7fe000 ( 751 MB)
Jul 06 17:41:10 [debug] ->>> lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
Jul 06 17:41:10 [debug] ->>> .init : 0xc0407000 - 0xc045f000 ( 352 kB)
Jul 06 17:41:10 [debug] ->>> .data : 0xc0337e78 - 0xc0400900 ( 802 kB)
Jul 06 17:41:10 [debug] ->>> .text : 0xc0100000 - 0xc0337e78 (2271 kB)
Jul 06 17:41:10 [debug] ->>> Checking if this processor honours the WP bit even in supervisor mode...Ok.
Jul 06 17:41:10 [debug] ->>> CPA: page pool initialized 1 of 1 pages preallocated
Jul 06 17:41:10 [debug] ->>> Calibrating delay using timer specific routine.. 6069.69 BogoMIPS (lpj=12139398)
Jul 06 17:41:10 [debug] ->>> Mount-cache hash table entries: 512
Jul 06 17:41:10 [debug] ->>> CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
Jul 06 17:41:10 [debug] ->>> CPU: L2 Cache: 1024K (64 bytes/line)
Jul 06 17:41:10 [debug] ->>> Intel machine check architecture supported.
Jul 06 17:41:10 [debug] ->>> Intel machine check reporting enabled on CPU#0.
Jul 06 17:41:10 [debug] ->>> Compat vDSO mapped to ffffe000.
Jul 06 17:41:10 [debug] ->>> Checking 'hlt' instruction... OK.
Jul 06 17:41:10 [debug] ->>> SMP alternatives: switching to UP code
Jul 06 17:41:10 [debug] ->>> Freeing SMP alternatives: 9k freed
Jul 06 17:41:10 [debug] ->>> ACPI: Core revision 20070126
Jul 06 17:41:10 [debug] ->>> ACPI: setting ELCR to 0200 (from 0e20)
Jul 06 17:41:10 [debug] ->>> CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ stepping 03
Jul 06 17:41:10 [debug] ->>> Total of 1 processors activated (6069.69 BogoMIPS).
Jul 06 17:41:10 [debug] ->>> Brought up 1 CPUs
Jul 06 17:41:10 [debug] ->>> CPU0 attaching NULL sched-domain.
Jul 06 17:41:10 [debug] ->>> net_namespace: 160 bytes
Jul 06 17:41:10 [debug] ->>> NET: Registered protocol family 16
Jul 06 17:41:10 [debug] ->>> EISA bus registered
Jul 06 17:41:10 [debug] ->>> ACPI: bus type pci registered
Jul 06 17:41:10 [debug] ->>> PCI: PCI BIOS revision 2.10 entry at 0xfd9a0, last bus=2
Jul 06 17:41:10 [debug] ->>> PCI: Using configuration type 1
Jul 06 17:41:10 [debug] ->>> Setting up standard PCI resources
Jul 06 17:41:10 [debug] ->>> ACPI: EC: Look up EC in DSDT
Jul 06 17:41:10 [debug] ->>> ACPI: Interpreter enabled
Jul 06 17:41:10 [debug] ->>> ACPI: (supports S0 S1 S5)
Jul 06 17:41:10 [debug] ->>> ACPI: Using PIC for interrupt routing
Jul 06 17:41:10 [debug] ->>> ACPI: PCI Root Bridge [PCI0] (0000:00)
Jul 06 17:41:10 [debug] ->>> pci 0000:00:07.3: quirk: region 1000-103f claimed by PIIX4 ACPI
Jul 06 17:41:10 [debug] ->>> pci 0000:00:07.3: quirk: region 1040-104f claimed by PIIX4 SMB
Jul 06 17:41:10 [debug] ->>> PCI: Transparent bridge - 0000:00:11.0
Jul 06 17:41:10 [debug] ->>> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Jul 06 17:41:10 [debug] ->>> ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 14 15)
Jul 06 17:41:10 [debug] ->>> ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 14 15)
Jul 06 17:41:10 [debug] ->>> ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 14 15)
Jul 06 17:41:10 [debug] ->>> ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 14 15)
Jul 06 17:41:10 [debug] ->>> Linux Plug and Play Support v0.97 (c) Adam Belay
Jul 06 17:41:10 [debug] ->>> pnp: PnP ACPI init
Jul 06 17:41:10 [debug] ->>> ACPI: bus type pnp registered
Jul 06 17:41:10 [debug] ->>> pnp: PnP ACPI: found 12 devices
Jul 06 17:41:10 [debug] ->>> ACPI: ACPI bus type pnp unregistered
Jul 06 17:41:10 [debug] ->>> PnPBIOS: Disabled by ACPI PNP
Jul 06 17:41:10 [debug] ->>> SCSI subsystem initialized
Jul 06 17:41:10 [debug] ->>> PCI: Using ACPI for IRQ routing
Jul 06 17:41:10 [debug] ->>> PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
Jul 06 17:41:10 [debug] ->>> system 00:01: ioport range 0x1000-0x103f has been reserved
Jul 06 17:41:10 [debug] ->>> system 00:01: ioport range 0x1040-0x104f has been reserved
Jul 06 17:41:10 [debug] ->>> PCI: Bridge: 0000:00:01.0
Jul 06 17:41:10 [debug] ->>> IO window: disabled.
Jul 06 17:41:10 [debug] ->>> MEM window: disabled.
Jul 06 17:41:10 [debug] ->>> PREFETCH window: disabled.
Jul 06 17:41:10 [debug] ->>> PCI: Bridge: 0000:00:11.0
Jul 06 17:41:10 [debug] ->>> IO window: 2000-2fff
Jul 06 17:41:10 [debug] ->>> MEM window: 0xe8900000-0xe89fffff
Jul 06 17:41:10 [debug] ->>> PREFETCH window: disabled.
Jul 06 17:41:10 [debug] ->>> PCI: Setting latency timer of device 0000:00:01.0 to 64
Jul 06 17:41:10 [debug] ->>> ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
Jul 06 17:41:10 [debug] ->>> PCI: setting IRQ 10 as level-triggered
Jul 06 17:41:10 [debug] ->>> ACPI: PCI Interrupt 0000:00:11.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
Jul 06 17:41:10 [debug] ->>> NET: Registered protocol family 2
Jul 06 17:41:10 [debug] ->>> IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
Jul 06 17:41:10 [debug] ->>> TCP established hash table entries: 8192 (order: 4, 65536 bytes)
Jul 06 17:41:10 [debug] ->>> TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
Jul 06 17:41:10 [debug] ->>> TCP: Hash tables configured (established 8192 bind 8192)
Jul 06 17:41:10 [debug] ->>> TCP reno registered
Jul 06 17:41:10 [debug] ->>> checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Jul 06 17:41:10 [debug] ->>> Freeing initrd memory: 58552k freed
Jul 06 17:41:10 [debug] ->>> Simple Boot Flag at 0x36 set to 0x1
Jul 06 17:41:10 [debug] ->>> audit: initializing netlink socket (disabled)
Jul 06 17:41:10 [debug] ->>> type=2000 audit(1215366026.395:1): initialized
Jul 06 17:41:10 [debug] ->>> Total HugeTLB memory allocated, 0
Jul 06 17:41:10 [debug] ->>> io scheduler noop registered
Jul 06 17:41:10 [debug] ->>> io scheduler anticipatory registered
Jul 06 17:41:10 [debug] ->>> io scheduler deadline registered (default)
Jul 06 17:41:10 [debug] ->>> io scheduler cfq registered
Jul 06 17:41:10 [debug] ->>> pci 0000:00:00.0: Limiting direct PCI/PCI transfers
Jul 06 17:41:10 [debug] ->>> pci 0000:00:0f.0: Boot video device
Jul 06 17:41:10 [debug] ->>> vesafb: framebuffer at 0xf0000000, mapped to 0xd0880000, using 3072k, total 17984k
Jul 06 17:41:10 [debug] ->>> vesafb: mode is 1024x768x16, linelength=2048, pages=0
Jul 06 17:41:10 [debug] ->>> vesafb: scrolling: redraw
Jul 06 17:41:10 [debug] ->>> vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Jul 06 17:41:10 [debug] ->>> Console: switching to colour frame buffer device 128x48
Jul 06 17:41:10 [debug] ->>> fb0: VESA VGA frame buffer device
Jul 06 17:41:10 [debug] ->>> isapnp: Scanning for PnP cards...
Jul 06 17:41:10 [debug] ->>> isapnp: No Plug & Play device found
Jul 06 17:41:10 [debug] ->>> Floppy drive(s): fd0 is 1.44M
Jul 06 17:41:10 [debug] ->>> FDC 0 is a post-1991 82077
Jul 06 17:41:10 [debug] ->>> brd: module loaded
Jul 06 17:41:10 [debug] ->>> Uniform Multi-Platform E-IDE driver
Jul 06 17:41:10 [debug] ->>> ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Jul 06 17:41:10 [debug] ->>> PIIX4: IDE controller (0x8086:0x7111 rev 0x01) at PCI slot 0000:00:07.1
Jul 06 17:41:10 [debug] ->>> PIIX4: not 100% native mode: will probe irqs later
Jul 06 17:41:10 [debug] ->>> ide0: BM-DMA at 0x1050-0x1057, BIOS settings: hda:DMA, hdb:PIO
Jul 06 17:41:10 [debug] ->>> ide1: BM-DMA at 0x1058-0x105f, BIOS settings: hdc:DMA, hdd:PIO
Jul 06 17:41:10 [debug] ->>> Probing IDE interface ide0...
Jul 06 17:41:10 [debug] ->>> hda: VMware Virtual IDE Hard Drive, ATA DISK drive
Jul 06 17:41:10 [debug] ->>> hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
Jul 06 17:41:10 [debug] ->>> hda: UDMA/33 mode selected
Jul 06 17:41:10 [debug] ->>> Probing IDE interface ide1...
Jul 06 17:41:10 [debug] ->>> hdc: VMware Virtual IDE CDROM Drive, ATAPI CD/DVD-ROM drive
Jul 06 17:41:10 [debug] ->>> hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4
Jul 06 17:41:10 [debug] ->>> hdc: UDMA/33 mode selected
Jul 06 17:41:10 [debug] ->>> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Jul 06 17:41:10 [debug] ->>> ide1 at 0x170-0x177,0x376 on irq 15
Jul 06 17:41:10 [debug] ->>> hda: max request size: 128KiB
Jul 06 17:41:10 [debug] ->>> hda: 41943040 sectors (21474 MB) w/32KiB Cache, CHS=44384/15/63
Jul 06 17:41:10 [debug] ->>> hda: unknown partition table
Jul 06 17:41:10 [debug] ->>> hdc: ATAPI 32X DVD-ROM drive, 512kB Cache
Jul 06 17:41:10 [debug] ->>> Uniform CD-ROM driver Revision: 3.20
Jul 06 17:41:10 [debug] ->>> Loading iSCSI transport class v2.0-869.
Jul 06 17:41:10 [debug] ->>> Driver 'sd' needs updating - please use bus_type methods
Jul 06 17:41:10 [debug] ->>> Driver 'sr' needs updating - please use bus_type methods
Jul 06 17:41:10 [debug] ->>> PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUS] at 0x60,0x64 irq 1,12
Jul 06 17:41:10 [debug] ->>> serio: i8042 KBD port at 0x60,0x64 irq 1
Jul 06 17:41:10 [debug] ->>> serio: i8042 AUX port at 0x60,0x64 irq 12
Jul 06 17:41:10 [debug] ->>> mice: PS/2 mouse device common for all mice
Jul 06 17:41:10 [debug] ->>> EISA: Probing bus 0 at eisa.0
Jul 06 17:41:10 [debug] ->>> Cannot allocate resource for EISA slot 1
Jul 06 17:41:10 [debug] ->>> Cannot allocate resource for EISA slot 2
Jul 06 17:41:10 [debug] ->>> EISA: Detected 0 cards.
Jul 06 17:41:10 [debug] ->>> TCP cubic registered
Jul 06 17:41:10 [debug] ->>> NET: Registered protocol family 1
Jul 06 17:41:10 [debug] ->>> NET: Registered protocol family 15
Jul 06 17:41:10 [debug] ->>> Using IPI No-Shortcut mode
Jul 06 17:41:10 [debug] ->>> input: AT Translated Set 2 keyboard as /class/input/input0
Jul 06 17:41:10 [debug] ->>> RAMDISK: Compressed image found at block 0
Jul 06 17:41:10 [debug] ->>> VFS: Mounted root (ext2 filesystem).
Jul 06 17:41:10 [debug] ->>> Freeing unused kernel memory: 352k freed
Jul 06 17:41:10 [debug] ->>> Failed to execute /etc/init. Attempting defaults...
Jul 06 17:41:10 [debug] ->>> pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Jul 06 17:41:10 [debug] ->>> shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Jul 06 17:41:10 [debug] ->>> piix4_smbus 0000:00:07.3: Found 0000:00:07.3 device
Jul 06 17:41:10 [debug] ->>> piix4_smbus 0000:00:07.3: Host SMBus controller not enabled!
Jul 06 17:41:10 [debug] ->>> No dock devices found.
Jul 06 17:41:10 [debug] ->>> usbcore: registered new interface driver usbfs
Jul 06 17:41:10 [debug] ->>> usbcore: registered new interface driver hub
Jul 06 17:41:10 [debug] ->>> usbcore: registered new device driver usb
Jul 06 17:41:10 [debug] ->>> ACPI: ACPI0007:00 is registered as cooling_device0
Jul 06 17:41:10 [debug] ->>> ACPI: Processor [CPU0] (supports 8 throttling states)
Jul 06 17:41:10 [debug] ->>> ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
Jul 06 17:41:10 [debug] ->>> PCI: setting IRQ 11 as level-triggered
Jul 06 17:41:10 [debug] ->>> ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
Jul 06 17:41:10 [debug] ->>> libata version 3.00 loaded.
Jul 06 17:41:10 [debug] ->>> USB Universal Host Controller Interface driver v3.0
Jul 06 17:41:10 [debug] ->>> ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 9
Jul 06 17:41:10 [debug] ->>> PCI: setting IRQ 9 as level-triggered
Jul 06 17:41:10 [debug] ->>> ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 9 (level, low) -> IRQ 9
Jul 06 17:41:10 [debug] ->>> uhci_hcd 0000:00:07.2: UHCI Host Controller
Jul 06 17:41:10 [debug] ->>> uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
Jul 06 17:41:10 [debug] ->>> uhci_hcd 0000:00:07.2: irq 9, io base 0x00001060
Jul 06 17:41:10 [debug] ->>> usb usb1: configuration #1 chosen from 1 choice
Jul 06 17:41:10 [debug] ->>> hub 1-0:1.0: USB hub found
Jul 06 17:41:10 [debug] ->>> hub 1-0:1.0: 2 ports detected
Jul 06 17:41:10 [debug] ->>> scsi: ***** BusLogic SCSI Driver Version 2.1.16 of 18 July 2002 *****
Jul 06 17:41:10 [debug] ->>> scsi: Copyright 1995-1998 by Leonard N. Zubkoff <lnz@dandelion.com>
Jul 06 17:41:10 [debug] ->>> ACPI: AC Adapter [ACAD] (on-line)
Jul 06 17:41:10 [debug] ->>> scsi0: Configuring BusLogic Model BT-958 PCI Wide Ultra SCSI Host Adapter
Jul 06 17:41:10 [debug] ->>> scsi0: Firmware Version: 5.07B, I/O Address: 0x1080, IRQ Channel: 11/Level
Jul 06 17:41:10 [debug] ->>> scsi0: PCI Bus: 0, Device: 16, Address: 0xE8801000, Host Adapter SCSI ID: 7
Jul 06 17:41:10 [debug] ->>> scsi0: Parity Checking: Enabled, Extended Translation: Enabled
Jul 06 17:41:10 [debug] ->>> scsi0: Synchronous Negotiation: Ultra, Wide Negotiation: Enabled
Jul 06 17:41:10 [debug] ->>> scsi0: Disconnect/Reconnect: Enabled, Tagged Queuing: Enabled
Jul 06 17:41:10 [debug] ->>> scsi0: Scatter/Gather Limit: 128 of 8192 segments, Mailboxes: 211
Jul 06 17:41:10 [debug] ->>> scsi0: Driver Queue Depth: 211, Host Adapter Queue Depth: 192
Jul 06 17:41:10 [debug] ->>> scsi0: Tagged Queue Depth: Automatic, Untagged Queue Depth: 3
Jul 06 17:41:10 [debug] ->>> scsi0: *** BusLogic BT-958 Initialized Successfully ***
Jul 06 17:41:10 [debug] ->>> input: Power Button (FF) as /class/input/input1
Jul 06 17:41:10 [debug] ->>> ACPI: Power Button (FF) [PWRF]
Jul 06 17:41:10 [debug] ->>> ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 5
Jul 06 17:41:10 [debug] ->>> PCI: setting IRQ 5 as level-triggered
Jul 06 17:41:10 [debug] ->>> ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNKA] -> GSI 5 (level, low) -> IRQ 5
Jul 06 17:41:10 [debug] ->>> ehci_hcd 0000:02:02.0: EHCI Host Controller
Jul 06 17:41:10 [debug] ->>> ehci_hcd 0000:02:02.0: new USB bus registered, assigned bus number 2
Jul 06 17:41:10 [debug] ->>> PCI: cache line size of 64 is not supported by device 0000:02:02.0
Jul 06 17:41:10 [debug] ->>> ehci_hcd 0000:02:02.0: irq 5, io mem 0xe8900000
Jul 06 17:41:10 [debug] ->>> ehci_hcd 0000:02:02.0: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Jul 06 17:41:10 [debug] ->>> pcnet32.c:v1.34 14.Aug.2007 tsbogend@alpha.franken.de
Jul 06 17:41:10 [debug] ->>> usb usb2: configuration #1 chosen from 1 choice
Jul 06 17:41:10 [debug] ->>> hub 2-0:1.0: USB hub found
Jul 06 17:41:10 [debug] ->>> hub 2-0:1.0: 6 ports detected
Jul 06 17:41:10 [debug] ->>> ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
Jul 06 17:41:10 [debug] ->>> pcnet32: PCnet/PCI II 79C970A at 0x2000, 00:0c:29:7b:cc:b1 assigned IRQ 10.
Jul 06 17:41:10 [debug] ->>> eth0: registered as PCnet/PCI II 79C970A
Jul 06 17:41:10 [debug] ->>> pcnet32: 1 cards_found.
Jul 06 17:41:10 [debug] ->>> Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
Jul 06 17:41:10 [debug] ->>> serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Jul 06 17:41:10 [debug] ->>> serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Jul 06 17:41:10 [debug] ->>> 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Jul 06 17:41:10 [debug] ->>> 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Jul 06 17:41:10 [debug] ->>> scsi0 : BusLogic BT-958
Jul 06 17:41:10 [debug] ->>> fuse init (API version 7.9)
Jul 06 17:41:10 [debug] ->>> NET: Registered protocol family 17
Jul 06 17:41:10 [debug] ->>> eth0: link up
Jul 06 17:41:10 [debug] ->>> eth0: link up
Jul 06 17:41:10 [debug] Exit code: 0
Jul 06 17:41:10 [debug] Executing: cat /etc/environment
Jul 06 17:41:10 [debug] ->>> LANG="de_DE.UTF8"
Jul 06 17:41:10 [debug] ->>> LANGUAGE="de"
Jul 06 17:41:10 [debug] ->>> LC_ALL="de_DE.UTF8"
Jul 06 17:41:10 [debug] Exit code: 0
Jul 06 17:41:10 [debug] Executing: env 2>&1
Jul 06 17:41:10 [debug] ->>> LANGUAGE=de
Jul 06 17:41:10 [debug] ->>> UPSTART_JOB=tty6
Jul 06 17:41:10 [debug] ->>> UPSTART_JOB_ID=17
Jul 06 17:41:10 [debug] ->>> TERM=linux
Jul 06 17:41:10 [debug] ->>> PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin
Jul 06 17:41:10 [debug] ->>> UPSTART_EVENT=runlevel
Jul 06 17:41:10 [debug] ->>> PWD=/
Jul 06 17:41:10 [debug] Exit code: 0
Jul 06 17:41:10 [debug] Executing: locale 2>&1
Jul 06 17:41:10 [debug] ->>> LANG=
Jul 06 17:41:10 [debug] ->>> LANGUAGE=de
Jul 06 17:41:10 [debug] ->>> LC_CTYPE="POSIX"
Jul 06 17:41:10 [debug] ->>> LC_NUMERIC="POSIX"
Jul 06 17:41:10 [debug] ->>> LC_TIME="POSIX"
Jul 06 17:41:10 [debug] ->>> LC_COLLATE="POSIX"
Jul 06 17:41:10 [debug] ->>> LC_MONETARY="POSIX"
Jul 06 17:41:10 [debug] ->>> LC_MESSAGES="POSIX"
Jul 06 17:41:10 [debug] ->>> LC_PAPER="POSIX"
Jul 06 17:41:10 [debug] ->>> LC_NAME="POSIX"
Jul 06 17:41:10 [debug] ->>> LC_ADDRESS="POSIX"
Jul 06 17:41:10 [debug] ->>> LC_TELEPHONE="POSIX"
Jul 06 17:41:10 [debug] ->>> LC_MEASUREMENT="POSIX"
Jul 06 17:41:10 [debug] ->>> LC_IDENTIFICATION="POSIX"
Jul 06 17:41:10 [debug] ->>> LC_ALL=
Jul 06 17:41:10 [debug] Exit code: 0
Jul 06 17:41:10 [debug] Reading /proc/cmdline
Jul 06 17:41:10 [info] Kernel commandline: {'lang': 'de', 'product': 'hwinvent', 'init': '/etc/init', 'boot_image': 'install', 'pckey': '********************************', 'service': '192.168.4.40', 'splash': '', 'vga': '791', 'reboot': 'b', 'noapic': '', 'initrd': 'miniroot.gz', 'quiet': '', 'video': 'vesa:ywrap,mtrr', 'ramdisk_size': '175880', 'hn': 'xp2'}
Jul 06 17:41:10 [debug] Command 'ifconfig' found: '/sbin/ifconfig'
Jul 06 17:41:10 [debug] Executing: /sbin/ifconfig
Jul 06 17:41:10 [debug] ->>> eth0 Link encap:Ethernet HWaddr 00:0c:29:7b:cc:b1
Jul 06 17:41:10 [debug] ->>> inet addr:192.168.2.12 Bcast:192.168.2.255 Mask:255.255.255.0
Jul 06 17:41:10 [debug] ->>> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
Jul 06 17:41:10 [debug] ->>> RX packets:3 errors:0 dropped:0 overruns:0 frame:0
Jul 06 17:41:10 [debug] ->>> TX packets:3 errors:0 dropped:0 overruns:0 carrier:0
Jul 06 17:41:10 [debug] ->>> collisions:0 txqueuelen:1000
Jul 06 17:41:10 [debug] ->>> RX bytes:1042 (1.0 KB) TX bytes:1522 (1.4 KB)
Jul 06 17:41:10 [debug] ->>> Interrupt:10 Base address:0x2000
Jul 06 17:41:10 [debug] ->>>
Jul 06 17:41:10 [debug] ->>> lo Link encap:Local Loopback
Jul 06 17:41:10 [debug] ->>> inet addr:127.0.0.1 Mask:255.0.0.0
Jul 06 17:41:10 [debug] ->>> UP LOOPBACK RUNNING MTU:16436 Metric:1
Jul 06 17:41:10 [debug] ->>> RX packets:2 errors:0 dropped:0 overruns:0 frame:0
Jul 06 17:41:10 [debug] ->>> TX packets:2 errors:0 dropped:0 overruns:0 carrier:0
Jul 06 17:41:10 [debug] ->>> collisions:0 txqueuelen:0
Jul 06 17:41:10 [debug] ->>> RX bytes:100 (100.0 B) TX bytes:100 (100.0 B)
Jul 06 17:41:10 [debug] ->>>
Jul 06 17:41:10 [debug] Exit code: 0
Jul 06 17:41:10 [info] Found ethernet device: 'eth0'
Jul 06 17:41:10 [debug] Command 'pump' found: '/sbin/pump'
Jul 06 17:41:10 [debug] Executing: /sbin/pump -s -i eth0
Jul 06 17:41:10 [debug] ->>> Device eth0
Jul 06 17:41:10 [debug] ->>> IP: 192.168.2.12
Jul 06 17:41:10 [debug] ->>> Netmask: 255.255.255.0
Jul 06 17:41:10 [debug] ->>> Broadcast: 192.168.2.255
Jul 06 17:41:10 [debug] ->>> Network: 192.168.2.0
Jul 06 17:41:10 [debug] ->>> Boot server 192.168.2.100
Jul 06 17:41:10 [debug] ->>> Next server 192.168.2.100
Jul 06 17:41:10 [debug] ->>> Gateway: 192.168.2.1
Jul 06 17:41:10 [debug] ->>> Gateways: 192.168.2.1
Jul 06 17:41:10 [debug] ->>> Boot file: linux/pxelinux.0
Jul 06 17:41:10 [debug] ->>> Hostname: xp2
Jul 06 17:41:10 [debug] ->>> Domain: testnetz.local
Jul 06 17:41:10 [debug] ->>> Nameservers: 192.168.2.1
Jul 06 17:41:10 [debug] ->>> Renewal time: Sun Jul 6 19:26:05 2008
Jul 06 17:41:10 [debug] ->>> Expiration time: Sun Jul 6 19:41:05 2008
Jul 06 17:41:10 [debug] Exit code: 0
Jul 06 17:41:13 [info] Using interface 'eth0' with ip '192.168.2.12'.
Jul 06 17:41:13 [info] DHCP result:
{
"domain" : "testnetz.local",
"network" : "192.168.2.0",
"nameservers" : "192.168.2.1",
"ip" : "192.168.2.12",
"hostname" : "xp2",
"bootfile" : "linux/pxelinux.0",
"broadcast" : "192.168.2.255",
"nextserver" : "192.168.2.100",
"netmask" : "255.255.255.0",
"gateways" : "192.168.2.1",
"device" : "eth0",
"expirationtime" : "Sun",
"bootserver" : "192.168.2.100",
"gateway" : "192.168.2.1",
"renewaltime" : "Sun"
}
Jul 06 17:41:13 [debug] Executing: /sbin/ifconfig eth0
Jul 06 17:41:13 [debug] ->>> eth0 Link encap:Ethernet HWaddr 00:0c:29:7b:cc:b1
Jul 06 17:41:13 [debug] ->>> inet addr:192.168.2.12 Bcast:192.168.2.255 Mask:255.255.255.0
Jul 06 17:41:13 [debug] ->>> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
Jul 06 17:41:13 [debug] ->>> RX packets:3 errors:0 dropped:0 overruns:0 frame:0
Jul 06 17:41:13 [debug] ->>> TX packets:3 errors:0 dropped:0 overruns:0 carrier:0
Jul 06 17:41:13 [debug] ->>> collisions:0 txqueuelen:1000
Jul 06 17:41:13 [debug] ->>> RX bytes:1042 (1.0 KB) TX bytes:1522 (1.4 KB)
Jul 06 17:41:13 [debug] ->>> Interrupt:10 Base address:0x2000
Jul 06 17:41:13 [debug] ->>>
Jul 06 17:41:13 [debug] Exit code: 0
Jul 06 17:41:13 [info] Ethernet hardware address: 00:0c:29:7b:cc:b1
Jul 06 17:41:13 [notice] Option service in kernel cmdline => using OPSICONFD mode
Jul 06 17:41:13 [info] Using FQDN 'xp2.testnetz.local'
Jul 06 17:41:13 [debug] Executing: ifconfig
Jul 06 17:41:13 [debug] ->>> eth0 Link encap:Ethernet HWaddr 00:0c:29:7b:cc:b1
Jul 06 17:41:13 [debug] ->>> inet addr:192.168.2.12 Bcast:192.168.2.255 Mask:255.255.255.0
Jul 06 17:41:13 [debug] ->>> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
Jul 06 17:41:13 [debug] ->>> RX packets:3 errors:0 dropped:0 overruns:0 frame:0
Jul 06 17:41:13 [debug] ->>> TX packets:3 errors:0 dropped:0 overruns:0 carrier:0
Jul 06 17:41:13 [debug] ->>> collisions:0 txqueuelen:1000
Jul 06 17:41:13 [debug] ->>> RX bytes:1042 (1.0 KB) TX bytes:1522 (1.4 KB)
Jul 06 17:41:13 [debug] ->>> Interrupt:10 Base address:0x2000
Jul 06 17:41:13 [debug] ->>>
Jul 06 17:41:13 [debug] ->>> lo Link encap:Local Loopback
Jul 06 17:41:13 [debug] ->>> inet addr:127.0.0.1 Mask:255.0.0.0
Jul 06 17:41:13 [debug] ->>> UP LOOPBACK RUNNING MTU:16436 Metric:1
Jul 06 17:41:13 [debug] ->>> RX packets:2 errors:0 dropped:0 overruns:0 frame:0
Jul 06 17:41:13 [debug] ->>> TX packets:2 errors:0 dropped:0 overruns:0 carrier:0
Jul 06 17:41:13 [debug] ->>> collisions:0 txqueuelen:0
Jul 06 17:41:13 [debug] ->>> RX bytes:100 (100.0 B) TX bytes:100 (100.0 B)
Jul 06 17:41:13 [debug] ->>>
Jul 06 17:41:13 [debug] Exit code: 0
Jul 06 17:41:13 [info] Creating JSONRPCBackend instance
Jul 06 17:41:13 [debug] Failed to get possible methods from backend manager
Jul 06 17:41:13 [info] Opening https connection to 192.168.4.40:4447
Jul 06 17:41:13 [debug] Options: {}
Jul 06 17:41:13 [debug] jsonrpc string: {"params":[],"id":1,"method":"getPossibleMethods_listOfHashes"}
Jul 06 17:41:13 [debug] requesting: 'https://192.168.4.40:4447/rpc', query '{"params":[],"id":1,"method":"getPossibleMethods_listOfHashes"}'
Jul 06 17:41:13 [debug] Using method POST
Jul 06 17:44:22 [critical] Traceback:
Jul 06 17:44:22 [critical] line 254 in '__request' in file '/var/lib/python-support/python2.5/OPSI/Backend/JSONRPC.py'
Jul 06 17:44:22 [critical] line 860 in 'endheaders' in file '/usr/lib/python2.5/httplib.py'
Jul 06 17:44:22 [critical] line 732 in '_send_output' in file '/usr/lib/python2.5/httplib.py'
Jul 06 17:44:22 [critical] line 699 in 'send' in file '/usr/lib/python2.5/httplib.py'
Jul 06 17:44:22 [critical] line 1134 in 'connect' in file '/usr/lib/python2.5/httplib.py'
Jul 06 17:44:22 [critical] line 1 in 'connect' in file '<string>'
Jul 06 17:44:22 [critical] ==>>> (110, 'Connection timed out')
Jul 06 17:44:22 [error] Connection to service '192.168.4.40' failed: Cannot connect to 'https://192.168.4.40:4447/rpc': Requesting 'https://192.168.4.40:4447/rpc', query '{"params":[],"id":1,"method":"getPossibleMethods_listOfHashes"}' failed: (110, 'Connection timed out')
Jul 06 17:46:24 [info] Creating admin backend
Jul 06 17:46:37 [info] Creating JSONRPCBackend instance
Jul 06 17:46:37 [debug] Failed to get possible methods from backend manager
Jul 06 17:46:37 [info] Opening https connection to 192.168.2.100:4447
Jul 06 17:46:37 [debug] Options: {}
Jul 06 17:46:37 [debug] jsonrpc string: {"params":[],"id":1,"method":"getPossibleMethods_listOfHashes"}
Jul 06 17:46:37 [debug] requesting: 'https://192.168.2.100:4447/rpc', query '{"params":[],"id":1,"method":"getPossibleMethods_listOfHashes"}'
Jul 06 17:46:37 [debug] Using method POST
Jul 06 17:46:37 [info] Successfully connected to '192.168.2.100:4447'
Jul 06 17:46:37 [debug] Options: {'params': ('__UNDEF__', '__UNDEF__', '__UNDEF__', '__UNDEF__', '__UNDEF__', '__UNDEF__', '__UNDEF__', '__UNDEF__', '__UNDEF__')}
Jul 06 17:46:37 [debug] jsonrpc string: {"params":[null,null,null,null,null,null,null,null,null],"id":1,"method":"getClientIds_list"}
Jul 06 17:46:37 [debug] requesting: 'https://192.168.2.100:4447/rpc', query '{"params":[null,null,null,null,null,null,null,null,null],"id":1,"method":"getClientIds_list"}'
Jul 06 17:46:37 [debug] Using method POST
Jul 06 17:46:37 [debug] Options: {'params': 'xp2.testnetz.local'}
Jul 06 17:46:37 [debug] jsonrpc string: {"params":["xp2.testnetz.local"],"id":1,"method":"getOpsiHostKey"}
Jul 06 17:46:37 [debug] requesting: 'https://192.168.2.100:4447/rpc', query '{"params":["xp2.testnetz.local"],"id":1,"method":"getOpsiHostKey"}'
Jul 06 17:46:37 [debug] Using method POST
Jul 06 17:46:37 [debug] Failed to get possible methods from backend manager
Jul 06 17:46:37 [info] Opening https connection to 192.168.2.100:4447
Jul 06 17:46:37 [debug] Options: {}
Jul 06 17:46:37 [debug] jsonrpc string: {"params":[],"id":1,"method":"getPossibleMethods_listOfHashes"}
Jul 06 17:46:37 [debug] requesting: 'https://192.168.2.100:4447/rpc', query '{"params":[],"id":1,"method":"getPossibleMethods_listOfHashes"}'
Jul 06 17:46:37 [debug] Using method POST
Jul 06 17:46:38 [info] Successfully connected to '192.168.2.100:4447'
Jul 06 17:46:38 [info] Product-id is 'hwinvent'
Jul 06 17:46:38 [info] Fetching product...
Jul 06 17:46:38 [debug] Options: {'params': ('hwinvent', '__UNDEF__')}
Jul 06 17:46:38 [debug] jsonrpc string: {"params":["hwinvent",null],"id":1,"method":"getProduct_hash"}
Jul 06 17:46:38 [debug] requesting: 'https://192.168.2.100:4447/rpc', query '{"params":["hwinvent",null],"id":1,"method":"getProduct_hash"}'
Jul 06 17:46:38 [debug] Using method POST
Jul 06 17:46:38 [info] Product-hash:

mehr Zeichen ging leider nicht
Danke übrigens für Ihre schnelle Antwort und das auf einem Sonntag, wow

[j.schneider]

Hallo,

bitte einmal im Configeditor den Button zur Server-Konfiguration anklicken und dann in der Netzwerkkonfiguration den Wert "nextbootServerURL" auf "https://192.168.2.100:4447" setzen.

Gruß
Jan Schneider

[polymorth]

Hallo Herr Schneider,

vielen Dank für Ihre Hilfe, jetzt funktioniert es ohne Berichtigung der IP-Adresse.

gruß ralf

[fr4g3r]

Hallo Ralf,

funktioniert die XP-Installation nun auch?
War das Problem bei den Berechtigungen?
Eine andere, mögliche Fehlerquelle ist folgendes:

Es muss auf die Groß- und Kleinschreibung geachtet werden!

Auf der Windowscd heisst der Ordner I386, auf dem opsi muss er i386 heissen.

Gruß
Christian

[polymorth]

Hallo Christian,

danke für Deinen Tip, genau das war mein Problem das statt i386 I386 im Verzeichnis befunden hat. Ich habe es dann gestern Abend noch gesehen:).