Ich bin noch ein ziemlicher Linux-Neuling also sagt mir bitte wenn ich eine dumme Frage stelle.
Ich habe mir zum Einstieg zuerst die Server-Version von ubuntu geholt und installiert. Hat alles geklappt, hat aber keine grafische Oberfläche. Also habe ich die Desktop-Edition installiert.
Als nächstes wollte ich denn opsi-Server installieren. Ich habe es sicher schon 5-mal probiert auch mit neu aufsetzten aber ich erhalte immer das gleiche Ergebnis.
Erste Frage: Kann man den opsi-Server auf der Desktop-Version von ubuntu überhaupt installieren und was muss man beachten.
Zweite Frage: Wenn JA, was mache ich falsch?
Hier meine Eingabe die mir Probleme bereiten. Die Schritte vorher habe ich glaub alle richtig gemacht (apt-get install wget lsof host python-mechanize p7zip-full, danach samba, dann mysql, dann openbsd-inetd und apt-get update, apt-get remove tftpd, update-inetd --remove tftpd, apt-get install opsi-atftpd):
Code: Alles auswählen
user@opsi-server:~$ sudo apt-get install opsi-depotserver
Paketlisten werden gelesen... Fertig
Abhängigkeitsbaum wird aufgebaut
Reading state information... Fertig
Die folgenden zusätzlichen Pakete werden installiert:
dhcp3-server duplicity librsync1 opsi-linux-bootimage opsi-utils opsiconfd
opsipxeconfd python-crypto python-json python-ldap python-mysqldb
python-newt python-openssl python-opsi python-pam python-pexpect
python-pyopenssl python-twisted-bin python-twisted-core python-twisted-web2
python-zopeinterface
Vorgeschlagene Pakete:
ncftp python-boto python-crypto-dbg python-ldap-dbg python-ldap-doc
python-egenix-mxdatetime python-mysqldb-dbg python-newt-dbg
python-openssl-dbg python-openssl-doc slapd python-pam-dbg
python-twisted-bin-dbg python-profiler python-qt3 python-tk python-wxgtk2.8
python-wxgtk2.6 python-zopeinterface-dbg
Empfohlene Pakete:
python-serial
Die folgenden NEUEN Pakete werden installiert:
dhcp3-server duplicity librsync1 opsi-depotserver opsi-linux-bootimage
opsi-utils opsiconfd opsipxeconfd python-crypto python-json python-ldap
python-mysqldb python-newt python-openssl python-opsi python-pam
python-pexpect python-pyopenssl python-twisted-bin python-twisted-core
python-twisted-web2 python-zopeinterface
0 aktualisiert, 22 neu installiert, 0 zu entfernen und 154 nicht aktualisiert.
Es müssen 65.8MB Archive geholt werden.
After this operation, 76.6MB of additional disk space will be used.
Möchten Sie fortfahren [J/n]? j
WARNUNG: Die folgenden Pakete können nicht authentifiziert werden!
python-opsi opsiconfd opsi-linux-bootimage opsi-utils opsipxeconfd
opsi-depotserver
Diese Pakete ohne Überprüfung installieren [j/N]? j
Hole:1 http://download.uib.de etch/opsi3.3 python-opsi 3.3.0.24-1 [154kB]
Hole:2 http://ch.archive.ubuntu.com hardy/main dhcp3-server 3.0.6.dfsg-1ubuntu9 [318kB]
Hole:3 http://download.uib.de etch/opsi3.3 opsiconfd 2.0.0.8-1 [27.5kB]
Hole:4 http://download.uib.de etch/opsi3.3 opsi-linux-bootimage 20080826-1 [63.3MB]
Hole:5 http://ch.archive.ubuntu.com hardy/main librsync1 0.9.7-1build1 [38.7kB]
Hole:6 http://ch.archive.ubuntu.com hardy/main python-pexpect 2.1-1build1 [117kB]
Hole:7 http://ch.archive.ubuntu.com hardy/universe duplicity 0.4.10-1 [128kB]
Hole:8 http://ch.archive.ubuntu.com hardy/main python-crypto 2.0.1+dfsg1-2.1ubuntu1 [217kB]
Hole:9 http://ch.archive.ubuntu.com hardy/universe python-json 3.4-2 [10.6kB]
Hole:10 http://ch.archive.ubuntu.com hardy/main python-ldap 2.3.1-1ubuntu3 [85.9kB]
Hole:11 http://ch.archive.ubuntu.com hardy/main python-mysqldb 1.2.2-5ubuntu1 [95.1kB]
Hole:12 http://ch.archive.ubuntu.com hardy/main python-newt 0.52.2-11.2ubuntu1 [54.9kB]
Hole:13 http://ch.archive.ubuntu.com hardy/main python-pam 0.4.2-12ubuntu2 [14.8kB]
Hole:14 http://ch.archive.ubuntu.com hardy/main python-openssl 0.6-5 [76.5kB]
Hole:15 http://ch.archive.ubuntu.com hardy/main python-pyopenssl 0.6-5 [8006B]
Hole:16 http://ch.archive.ubuntu.com hardy/main python-twisted-bin 2.5.0-2build2 [21.0kB]
Hole:17 http://ch.archive.ubuntu.com hardy/main python-zopeinterface 3.3.1-5ubuntu2 [135kB]
Hole:18 http://ch.archive.ubuntu.com hardy/main python-twisted-core 2.5.0-2build2 [757kB]
Hole:19 http://ch.archive.ubuntu.com hardy/main python-twisted-web2 0.2.0+svn20070403-1build1 [230kB]
Hole:20 http://download.uib.de etch/opsi3.3 opsi-linux-bootimage 20080826-1 [63.3MB]
Hole:21 http://download.uib.de etch/opsi3.3 opsi-utils 3.3.0.10-1 [55.5kB]
Hole:22 http://download.uib.de etch/opsi3.3 opsipxeconfd 0.3.4-1 [11.1kB]
Hole:23 http://download.uib.de etch/opsi3.3 opsi-depotserver 3.3-9 [7974B]
Es wurden 43.2MB in 4min49s geholt (149kB/s)
Vorkonfiguration der Pakete ...
OK
Wähle vormals abgewähltes Paket dhcp3-server.
(Lese Datenbank ... 100842 Dateien und Verzeichnisse sind derzeit installiert.)
Entpacke dhcp3-server (aus .../dhcp3-server_3.0.6.dfsg-1ubuntu9_i386.deb) ...
Wähle vormals abgewähltes Paket librsync1.
Entpacke librsync1 (aus .../librsync1_0.9.7-1build1_i386.deb) ...
Wähle vormals abgewähltes Paket python-pexpect.
Entpacke python-pexpect (aus .../python-pexpect_2.1-1build1_all.deb) ...
Wähle vormals abgewähltes Paket duplicity.
Entpacke duplicity (aus .../duplicity_0.4.10-1_i386.deb) ...
Wähle vormals abgewähltes Paket python-crypto.
Entpacke python-crypto (aus .../python-crypto_2.0.1+dfsg1-2.1ubuntu1_i386.deb) ...
Wähle vormals abgewähltes Paket python-json.
Entpacke python-json (aus .../python-json_3.4-2_all.deb) ...
Wähle vormals abgewähltes Paket python-ldap.
Entpacke python-ldap (aus .../python-ldap_2.3.1-1ubuntu3_i386.deb) ...
Wähle vormals abgewähltes Paket python-mysqldb.
Entpacke python-mysqldb (aus .../python-mysqldb_1.2.2-5ubuntu1_i386.deb) ...
Wähle vormals abgewähltes Paket python-newt.
Entpacke python-newt (aus .../python-newt_0.52.2-11.2ubuntu1_i386.deb) ...
Wähle vormals abgewähltes Paket python-pam.
Entpacke python-pam (aus .../python-pam_0.4.2-12ubuntu2_i386.deb) ...
Wähle vormals abgewähltes Paket python-openssl.
Entpacke python-openssl (aus .../python-openssl_0.6-5_i386.deb) ...
Wähle vormals abgewähltes Paket python-pyopenssl.
Entpacke python-pyopenssl (aus .../python-pyopenssl_0.6-5_all.deb) ...
Wähle vormals abgewähltes Paket python-opsi.
Entpacke python-opsi (aus .../python-opsi_3.3.0.24-1_all.deb) ...
Wähle vormals abgewähltes Paket python-twisted-bin.
Entpacke python-twisted-bin (aus .../python-twisted-bin_2.5.0-2build2_i386.deb) ...
Wähle vormals abgewähltes Paket python-zopeinterface.
Entpacke python-zopeinterface (aus .../python-zopeinterface_3.3.1-5ubuntu2_i386.deb) ...
Wähle vormals abgewähltes Paket python-twisted-core.
Entpacke python-twisted-core (aus .../python-twisted-core_2.5.0-2build2_all.deb) ...
Wähle vormals abgewähltes Paket python-twisted-web2.
Entpacke python-twisted-web2 (aus .../python-twisted-web2_0.2.0+svn20070403-1build1_all.deb) ...
Wähle vormals abgewähltes Paket opsiconfd.
Entpacke opsiconfd (aus .../opsiconfd_2.0.0.8-1_all.deb) ...
Wähle vormals abgewähltes Paket opsi-linux-bootimage.
Entpacke opsi-linux-bootimage (aus .../opsi-linux-bootimage_20080826-1_all.deb) ...
Wähle vormals abgewähltes Paket opsi-utils.
Entpacke opsi-utils (aus .../opsi-utils_3.3.0.10-1_all.deb) ...
Wähle vormals abgewähltes Paket opsipxeconfd.
Entpacke opsipxeconfd (aus .../opsipxeconfd_0.3.4-1_all.deb) ...
Wähle vormals abgewähltes Paket opsi-depotserver.
Entpacke opsi-depotserver (aus .../opsi-depotserver_3.3-9_all.deb) ...
Adding system users and groups...
-> Adding group pcpatch
-> Adding user pcpatch
-> Adding user opsiconfd
Writing depot.ini
Richte dhcp3-server ein (3.0.6.dfsg-1ubuntu9) ...
Generating /etc/default/dhcp3-server...
* Starting DHCP server dhcpd3 [fail]
invoke-rc.d: initscript dhcp3-server, action "start" failed.
Richte librsync1 ein (0.9.7-1build1) ...
Richte python-pexpect ein (2.1-1build1) ...
Richte duplicity ein (0.4.10-1) ...
Richte python-crypto ein (2.0.1+dfsg1-2.1ubuntu1) ...
Richte python-json ein (3.4-2) ...
Richte python-ldap ein (2.3.1-1ubuntu3) ...
Richte python-mysqldb ein (1.2.2-5ubuntu1) ...
Richte python-newt ein (0.52.2-11.2ubuntu1) ...
Richte python-pam ein (0.4.2-12ubuntu2) ...
Richte python-openssl ein (0.6-5) ...
Richte python-pyopenssl ein (0.6-5) ...
Richte python-opsi ein (3.3.0.24-1) ...
Richte python-twisted-bin ein (2.5.0-2build2) ...
Richte python-zopeinterface ein (3.3.1-5ubuntu2) ...
Richte python-twisted-core ein (2.5.0-2build2) ...
Richte python-twisted-web2 ein (0.2.0+svn20070403-1build1) ...
Richte opsiconfd ein (2.0.0.8-1) ...
OK
Generating a 1024 bit RSA private key
......++++++
..............++++++
writing new private key to '/etc/opsi/opsiconfd.pem'
-----
1024 semi-random bytes loaded
Generating DH parameters, 512 bit long safe prime, generator 2
This is going to take a long time
.............+.......+.+......+....+....+.......................+...+......+...............................+.............................................................+..............+.........................................+...................+......+.................+..................................................+................................................+..+.+..................................................+.......+....+...................+....+...............................................................+.....+.........................+............................+..................+...............................................................................+................+.............................+...............+...........................++*++*++*++*++*++*
subject= /C=DE/ST=Rheinland-Pfalz/L=Mainz/O=uib/CN=opsidepot.uib.local/emailAddress=info@uib.de
notBefore=Oct 28 20:01:35 2008 GMT
notAfter=Jul 25 20:01:35 2011 GMT
SHA1 Fingerprint=56:07:EE:A0:D9:FB:A1:56:FC:7D:12:E1:66:95:91:93:32:FE:77:36
Starting opsi config service... (done).
Richte opsi-linux-bootimage ein (20080826-1) ...
Richte opsi-utils ein (3.3.0.10-1) ...
Richte opsipxeconfd ein (0.3.4-1) ...
Starting opsi pxe configuration service..[1] [Oct 28 21:01:40] Traceback: (Logger.py|591)
[1] [Oct 28 21:01:40] line 790 in '<module>' in file '/usr/sbin/opsipxeconfd' (Logger.py|591)
[1] [Oct 28 21:01:40] line 761 in 'main' in file '/usr/sbin/opsipxeconfd' (Logger.py|591)
[1] [Oct 28 21:01:40] line 52 in '__init__' in file '/usr/sbin/opsipxeconfd' (Logger.py|591)
[1] [Oct 28 21:01:40] ==>>> Failed to get my own fully qualified domainname (opsipxeconfd|799)
ERROR: Failed to get my own fully qualified domainname
.......... (failed).
invoke-rc.d: initscript opsipxeconfd, action "start" failed.
Richte opsi-depotserver ein (3.3-9) ...
System information
-> IP-Address: 127.0.1.1
-> Broadcast: 127.0.31.255
-> Netmask: 255.255.225.0
-> Subnet: 127.0.1.0
-> Gateway: 192.168.0.1
-> Hostname: opsi-server
-> Domain:
-> Fqdn: opsi-server
-> Windomain: WORKGROUP
The hostname opsi-server returned by 'hostname --fqdn' is not a fully qualified domain name
Opsi needs a fully qualified domain name in the form of <hostname>.<domain>.<tld>
dpkg: Fehler beim Bearbeiten von opsi-depotserver (--configure):
Unterprozess post-installation script gab den Fehlerwert 1 zurück
Processing triggers for libc6 ...
ldconfig deferred processing now taking place
Fehler traten auf beim Bearbeiten von:
opsi-depotserver
E: Sub-process /usr/bin/dpkg returned an error code (1)
Ich hoffe es kann mir jemand helfen!