Opsi UEFI Boot bei HP ZBook 14uG6
Opsi UEFI Boot bei HP ZBook 14uG6
Hallo Leute,
ich schaffe es auf dem oben genannten Gerät kein PXE Boot auszuführen.
Nachdem das PXE Bootimage geladen wird sehe ich nur "Starte Hardware-Inventarisierung" und dann stoppt die Installation.
Ich habe schon versucht mit der alten efi Boot Datei zu laden -> keine Besserung.
Aktuell installiere ich mit "shimx64.efi.signed" was bis dato auch immer geklappt hat
Ich sehe auf tty1 folgendes
https://ibb.co/n1TV1S3
auf tty2 das hier
https://ibb.co/ZhtKzcZ
und auf tty3 kann ich mich anmelden an einer Shell
Zudem ist aufgefallen, beim laden des Linux Boot Images, braucht der opsi.service mindestens 2 minuten, erst dann springt dieser weiter.
Folgendes OPSI habe ich
[root@afb-app-ins-001 pxelinux.cfg]# rpm -qa |grep opsi
opsi-tftp-hpa-server-5.2.8-56.1.x86_64
opsi-utils-4.1.1.36-1.1.noarch
opsi-server-4.1.1.8-1.1.noarch
opsiconfd-4.1.1.20-1.1.noarch
opsipxeconfd-4.1.1.20-3.1.noarch
opsi-windows-support-4.1.1-8.1.noarch
opsi-linux-bootimage-20210326-1.1.noarch -> Bereits für Tests aus dem Experimental geholt
python-opsi-4.1.1.101-1.1.noarch
Habt Ihr eine Idee? Oder was kann ich noch testen?
BTW: ein HP ZBook 14uG7 klappt einwandfrei (beide mit 512GB M.2 2280 SN720 PCIe Gen3x4 TLC SS) HDD
ich schaffe es auf dem oben genannten Gerät kein PXE Boot auszuführen.
Nachdem das PXE Bootimage geladen wird sehe ich nur "Starte Hardware-Inventarisierung" und dann stoppt die Installation.
Ich habe schon versucht mit der alten efi Boot Datei zu laden -> keine Besserung.
Aktuell installiere ich mit "shimx64.efi.signed" was bis dato auch immer geklappt hat
Ich sehe auf tty1 folgendes
https://ibb.co/n1TV1S3
auf tty2 das hier
https://ibb.co/ZhtKzcZ
und auf tty3 kann ich mich anmelden an einer Shell
Zudem ist aufgefallen, beim laden des Linux Boot Images, braucht der opsi.service mindestens 2 minuten, erst dann springt dieser weiter.
Folgendes OPSI habe ich
[root@afb-app-ins-001 pxelinux.cfg]# rpm -qa |grep opsi
opsi-tftp-hpa-server-5.2.8-56.1.x86_64
opsi-utils-4.1.1.36-1.1.noarch
opsi-server-4.1.1.8-1.1.noarch
opsiconfd-4.1.1.20-1.1.noarch
opsipxeconfd-4.1.1.20-3.1.noarch
opsi-windows-support-4.1.1-8.1.noarch
opsi-linux-bootimage-20210326-1.1.noarch -> Bereits für Tests aus dem Experimental geholt
python-opsi-4.1.1.101-1.1.noarch
Habt Ihr eine Idee? Oder was kann ich noch testen?
BTW: ein HP ZBook 14uG7 klappt einwandfrei (beide mit 512GB M.2 2280 SN720 PCIe Gen3x4 TLC SS) HDD
Re: Opsi UEFI Boot bei HP ZBook 14uG6
Schau doch mal in der tty3 nach anmelden mit root // linux123 was in der /tmp/log steht...
Kein Support per DM!
_________________________
opsi support - https://www.uib.de/
For productive opsi installations we recommend support contracts.
_________________________
opsi support - https://www.uib.de/
For productive opsi installations we recommend support contracts.
Re: Opsi UEFI Boot bei HP ZBook 14uG6
Hallo @ThomasT,
es scheint der lshw aus dem miniboot zu sein, welcher sich aufhängt
Der failed ist durch mich, da ich den Prozess "/usr/bin/lshw -xml 2>/dev/null" mal abgeschossen habe.
Ich sehe auf tty3 zwei Prozesse, da ich aber kein strace in dem minilinux ist, kann ich nicht schauen auf was er wartet.
Auch ein "lsusb" hängt, scheint also hier das Problem zu liegen.
Habt Ihr in einem Image eine andere/neuere Version von ls in einem Bootimage?
Danke
es scheint der lshw aus dem miniboot zu sein, welcher sich aufhängt
Code: Alles auswählen
(1482) [2] [Mai 24 23:50:44] Traceback: (Logger.py|798)
(1483) [2] [Mai 24 23:50:44] File "/usr/local/bin/master.py", line 1656, in <module>
(1484) execfile(actionScript)
(1485) (Logger.py|798)
(1486) [2] [Mai 24 23:50:44] File "/tmp/setup.py", line 560, in <module>
(1487) auditHardwareOnHosts = auditHardware(config = hwconfig, hostId = clientId)
(1488) (Logger.py|798)
(1489) [2] [Mai 24 23:50:44] File "/usr/lib/python2.7/dist-packages/OPSI/System/Posix.py", line 3144, in auditHardware
(1490) info = hardwareInventory(config)
(1491) (Logger.py|798)
(1492) [2] [Mai 24 23:50:44] File "/usr/lib/python2.7/dist-packages/OPSI/System/Posix.py", line 3249, in hardwareInventory
(1493) xmlOut = u'\n'.join(execute(u"%s -xml 2>/dev/null" % which("lshw")))
(1494) (Logger.py|798)
(1495) [2] [Mai 24 23:50:44] File "/usr/lib/python2.7/dist-packages/OPSI/System/Posix.py", line 1017, in execute
(1496) raise RuntimeError(u"Command '%s' failed (%s):\n%s" % (cmd, exitCode, u'\n'.join(result)))
(1497) (Logger.py|798)
(1498) [2] [Mai 24 23:50:44] ==>>> Command '/usr/bin/lshw -xml 2>/dev/null' failed (-15):
(1499) (master.py|1708)
(1510) [5] [Mai 24 23:50:44] Writing log to service (master.py|1737)
Ich sehe auf tty3 zwei Prozesse, da ich aber kein strace in dem minilinux ist, kann ich nicht schauen auf was er wartet.
Auch ein "lsusb" hängt, scheint also hier das Problem zu liegen.
Habt Ihr in einem Image eine andere/neuere Version von ls in einem Bootimage?
Danke
Re: Opsi UEFI Boot bei HP ZBook 14uG6
Hi
du kannst mal beim Hängen des Prozesses schauen ob im dmesg oder syslog etwas interessantes steht.
Gruß
Mathias
du kannst mal beim Hängen des Prozesses schauen ob im dmesg oder syslog etwas interessantes steht.
Gruß
Mathias
Kein Support per DM!
_________________________
opsi support - http://www.uib.de/
For productive opsi installations we recommend support contracts.
_________________________
opsi support - http://www.uib.de/
For productive opsi installations we recommend support contracts.
Re: Opsi UEFI Boot bei HP ZBook 14uG6
Hi Mathias,
hab mal ein Foto gemacht von dmesg, ich kann damit nichts anfangen
https://ibb.co/KWP6M8b
Habe es mal mit der Imagedatei "opsi-linux-bootimage-20210519-1.1.noarch" versucht (aus dem 4.2 Repo).
Damit komme ich über die Hardware-Inventarisierung, nur leider bricht er dann ab mit
Noch Ideen?
hab mal ein Foto gemacht von dmesg, ich kann damit nichts anfangen
https://ibb.co/KWP6M8b
Habe es mal mit der Imagedatei "opsi-linux-bootimage-20210519-1.1.noarch" versucht (aus dem 4.2 Repo).
Damit komme ich über die Hardware-Inventarisierung, nur leider bricht er dann ab mit
Code: Alles auswählen
(13009) [2] [2021-05-25 00:52:16.351] [ ] 'NoneType' object is not subscriptable (Logger.py:344)
(13010) Traceback (most recent call last):
(13011) File "run-master", line 1647, in <module>
(13012) File "/tmp/setup.py", line 1744, in <module>
(13013) currentbootentry = uefiGetActBootEntry()
(13014) File "<string>", line 747, in uefiGetActBootEntry
(13015) TypeError: 'NoneType' object is not subscriptable
Re: Opsi UEFI Boot bei HP ZBook 14uG6
Welche version hat denn dein Windows Netboot Paket?
Gruß
Mathias
Gruß
Mathias
Kein Support per DM!
_________________________
opsi support - http://www.uib.de/
For productive opsi installations we recommend support contracts.
_________________________
opsi support - http://www.uib.de/
For productive opsi installations we recommend support contracts.
Re: Opsi UEFI Boot bei HP ZBook 14uG6
Hi Mathias,
folgende OPSI Pakete
und folgende Windows Pakete
Ich installiere mit win10-x64 und einem Windows 20H1
folgende OPSI Pakete
Code: Alles auswählen
[root@afb-app-ins-001 preferred]# rpm -qa |grep opsi
opsi-linux-bootimage-20210519-1.1.noarch
opsi-tftp-hpa-server-5.2.8-56.1.x86_64
opsi-utils-4.1.1.36-1.1.noarch
opsiconfd-4.1.1.20-1.1.noarch
opsi-windows-support-4.1.1-8.1.noarch
opsi-server-4.1.1.8-1.1.noarch
python-opsi-4.1.1.101-1.1.noarch
opsipxeconfd-4.1.1.20-3.1.noarch
Code: Alles auswählen
[root@afb-app-ins-001 preferred]# opsi-package-manager -l | grep win
activate-win 1.0-9 Windows Activation
config-win-base 4.0.1-1 Windows Customizing
config-win10 4.1.1-9 Configure Windows 10
config-win10-lang 1.0-2 config-win10-lang
config-win81-desktop 4.0.5-3 Windows Customizing for Win8.1 Desktop
hwinvent 4.1.0.1-3 Hardware Inventarisierung
opsi-winpe 4.1.0-1 WinPE patching tool
opsi-winst 4.12.4.13-1 winst
win10-x64 4.1.0.2-13 Windows 10 x64
win2016 4.1.0.2-13 Windows Server 2016
win2019 4.1.0.2-13 Windows Server 2019
windomain 1.0-11 Join NT/AD Domain
windows10-upgrade 20.09-3 Windows 10 Upgrade
winscp 5.15.3-1 WinSCP
Re: Opsi UEFI Boot bei HP ZBook 14uG6
So neue Infos.
Mit "opsi-linux-bootimage-20201215-1.1.noarch" und "opsi-linux-bootimage.append = acpi=off, noapic" schafft er die Installationsvorbereitung
und bleibt dann mit
stehen. Es scheint aber als würde er die HW-Analyse auch überspringen....
Wenn ich nun einen Neustart durchführe startet nach dem erneuten drücken der Powertaste das "startnet.cmd" Skript.
Hoffe das hilft.....
Mit "opsi-linux-bootimage-20201215-1.1.noarch" und "opsi-linux-bootimage.append = acpi=off, noapic" schafft er die Installationsvorbereitung
und bleibt dann mit
Code: Alles auswählen
12978) [5] [Mai 25 13:28:07] Reading config.ini data: config_service.url: https://10.10.2.100:4447 (setup.py|1731)
(12979) [5] [Mai 25 13:28:07] config_service.url from clientconfig: https://10.10.2.100:4447/rpc (setup.py|1732)
(12980) [4] [Mai 25 13:28:07] service url from config.ini: https://10.10.2.100:4447 is different to clientconfig.configserver.url (commandline or input mask): https://10.10.2.100:4447/rpc (setup.py|1734)
(12981) [5] [Mai 25 13:28:07] Using config.ini data as service url: config_service.url: https://10.10.2.100:4447 (setup.py|1735)
(13034) [2] [Mai 25 13:28:08] Traceback: (Logger.py|798)
(13035) [2] [Mai 25 13:28:08] File "/usr/local/bin/master.py", line 1656, in <module>
(13036) execfile(actionScript)
(13037) (Logger.py|798)
(13038) [2] [Mai 25 13:28:08] File "/tmp/setup.py", line 1744, in <module>
(13039) currentbootentry = uefiGetActBootEntry()
(13040) (Logger.py|798)
(13041) [2] [Mai 25 13:28:08] File "<string>", line 747, in uefiGetActBootEntry
(13042) (Logger.py|798)
(13043) [2] [Mai 25 13:28:08] ==>>> 'NoneType' object has no attribute '__getitem__' (master.py|1708)
(13054) [5] [Mai 25 13:28:08] Writing log to service (master.py|1737)
stehen. Es scheint aber als würde er die HW-Analyse auch überspringen....
Wenn ich nun einen Neustart durchführe startet nach dem erneuten drücken der Powertaste das "startnet.cmd" Skript.
Hoffe das hilft.....
Re: Opsi UEFI Boot bei HP ZBook 14uG6
Hi
ja da stimmt etwas nicht beim Auslesen des aktuellen UEFI Startgeräts
gib mir mal den Output von
Gruß
Mathias
ja da stimmt etwas nicht beim Auslesen des aktuellen UEFI Startgeräts
gib mir mal den Output von
Code: Alles auswählen
efibootmgr -v
Mathias
Kein Support per DM!
_________________________
opsi support - http://www.uib.de/
For productive opsi installations we recommend support contracts.
_________________________
opsi support - http://www.uib.de/
For productive opsi installations we recommend support contracts.
Re: Opsi UEFI Boot bei HP ZBook 14uG6
Hi Mathias,
hier der Output
hier der Output
Code: Alles auswählen
(miniroot-x64)root@nb1000880:~# efibootmgr -v
BootCurrent: 0004
Timeout: 0 seconds
BootOrder: 0000,0005,0001,0004,0003
Boot0000* Windows Boot Manager HD(1,GPT,3d443a2a-bda0-11eb-9f0c-806e6f6e6963,0x800,0x31801)/File(\EFI\Microsoft\Boot\bootmgfw.efi)WINDOWS.........x...B.C.D.O.B.J.E.C.T.=.{.9.d.e.a.8.6.2.c.-.5.c.d.d.-.4.e.7.0.-.a.c.c.1.-.f.3.2.b.3.4.4.d.4.7.9.5.}...a...............
Boot0001* WDC PC SN720 SDAPNTW-512G-1006-19304D802106 PciRoot(0x0)/Pci(0x1d,0x4)/Pci(0x0,0x0)/NVMe(0x1,00-1B-44-8B-44-D6-00-B4)N.....YM....R,Y.....ISPH
Boot0002* IPV4 Network PciRoot(0x0)/Pci(0x1c,0x0)/Pci(0x0,0x0)/Pci(0x1,0x0)/Pci(0x0,0x0)/Pci(0x2,0x0)/Pci(0x0,0x0)/USB(2,0)/USB(2,0)/USB(2,0)/MAC(0068eb6c14b4,0)/IPv4(0.0.0.00.0.0.0,0,0)N.....YM....R,Y.....ISPH
Boot0003* IPV6 Network - Intel(R) Ethernet Connection (6) I219-LM PciRoot(0x0)/Pci(0x1f,0x6)/MAC(0068eb6c14b2,0)/IPv6([::]:<->[::]:,0,0)N.....YM....R,Y.....ISPH
Boot0004* IPV4 Network - Intel(R) Ethernet Connection (6) I219-LM PciRoot(0x0)/Pci(0x1f,0x6)/MAC(0068eb6c14b2,0)/IPv4(0.0.0.00.0.0.0,0,0)N.....YM....R,Y.....ISPH
Boot0005 USB: PciRoot(0x0)/Pci(0x14,0x0)N.....YM....R,Y.....ISPH
Boot0006* IPV6 Network - Intel(R) Ethernet Connection (6) I219-LM PciRoot(0x0)/Pci(0x1f,0x6)/MAC(0068eb6c14b2,0)/IPv6([::]:<->[::]:,0,0)N.....YM....R,Y.....ISPH