Seite 1 von 2

PXE Installation mit M.2 NVME

Verfasst: 06 Sep 2019, 07:29
von RobWo
Hallo zusammen,

wir bekommen in letzter Zeit Hardware mit M.2 NVMe Speicher. Leider funktioniert die PXE Installation damit nicht (vielleicht liegt es aber auch an etwas anderem).

Der Computer bleibt beim Punkt stehen, wenn er erfolgreich den Miniroot.bz2 geladen hat. Danach ist auch kein Neustart mit STRG+ALT+ENTF mehr möglich. Der Rechner hängt sich so gesehen komplett auf und nur noch ein Kaltstart lässt den Rechner booten.

Leider kann ich kein Log oder ähnliches vom Client holen, da er ihn an diesem Punkt noch nicht schreibt bzw. übermittelt.
Die Pipe unter /tftpboot/linux/pxelinux.cfg wird anscheinend gelesen und ist damit nicht mehr vorhanden.

UEFI Boot ist an, Secure Boot ist natürlich aus.
Es ist ein X299 Board.

Hat jemand eine Idee?

Re: PXE Installation mit M.2 NVME

Verfasst: 06 Sep 2019, 11:57
von wolfbardo
opsi-linux bootimage version?
Netbootversion? (z.B. win10-x64)

Gruss
Bardo Wolf

Re: PXE Installation mit M.2 NVME

Verfasst: 06 Sep 2019, 15:04
von RobWo
Hey,

entschuldige bitte. Ich habe leider zu schnell auf Absenden gedrückt und konnte dann nichts mehr anfügen :roll:

Netbootimage wird win10-x64 in der Version 4.1.0.1-3 verwendet.
Opsipxeconfd.log


[5] [Sep 05 12:06:57] Got connection from client (opsipxeconfd|179)
[5] [Sep 05 12:06:57] Ignoring given pxeConfigTemplate because uefi detected for the client. (opsipxeconfd|564)
[5] [Sep 05 12:06:57] elilo configuration detected for RECHNERNAME.DOMA.IN (opsipxeconfd|775)
[5] [Sep 05 12:06:57] PXE boot configuration for host RECHNERNAME.DOMA.IN is now set at u'/tftpboot/linux/pxelinux.cfg/01-04-92-26-4b-2b-d4' (opsipxeconfd|451)
[5] [Sep 05 12:07:33] Pipe u'/tftpboot/linux/pxelinux.cfg/01-04-92-26-4b-2b-d4' opened, piping pxe boot configuration (opsipxeconfd|812)

Syslog:

Sep 5 12:06:40 opsi systemd[29111]: Time has been changed
Sep 5 12:06:40 opsi systemd[1]: Time has been changed
Sep 5 12:06:40 opsi systemd[56907]: Time has been changed
Sep 5 12:06:40 opsi systemd[1]: apt-daily-upgrade.timer: Adding 38min 35.605998s random time.
Sep 5 12:06:40 opsi systemd[36215]: Time has been changed
Sep 5 12:06:40 opsi systemd[1]: apt-daily.timer: Adding 1h 39min 57.039403s random time.
Sep 5 12:06:40 opsi systemd[10951]: Time has been changed
Sep 5 12:06:40 opsi systemd[52257]: Time has been changed
Sep 5 12:06:41 opsi snmpd[627]: Connection from UDP: [1.2.35.51]:53269->[1.2.35.37]:161
Sep 5 12:06:41 opsi snmpd[627]: Connection from UDP: [1.2.35.51]:53274->[1.2.35.37]:161
Sep 5 12:06:41 opsi in.tftpd[58424]: RRQ from 1.2.133.156 filename linux/pxelinux.cfg/elilo.efi
Sep 5 12:06:41 opsi in.tftpd[58424]: tftp: client does not accept options
Sep 5 12:06:41 opsi in.tftpd[58425]: RRQ from 1.2.133.156 filename linux/pxelinux.cfg/elilo.efi
Sep 5 12:06:41 opsi in.tftpd[58426]: RRQ from 1.2.133.156 filename linux/pxelinux.cfg/0A0A859C.conf
Sep 5 12:06:41 opsi in.tftpd[58427]: RRQ from 1.2.133.156 filename linux/pxelinux.cfg/0A0A85-x86_64.conf
Sep 5 12:06:41 opsi in.tftpd[58428]: RRQ from 1.2.133.156 filename linux/pxelinux.cfg/0A0A85.conf
Sep 5 12:06:41 opsi in.tftpd[58429]: RRQ from 1.2.133.156 filename linux/pxelinux.cfg/0A0A-x86_64.conf
Sep 5 12:06:41 opsi in.tftpd[58430]: RRQ from 1.2.133.156 filename linux/pxelinux.cfg/0A0A.conf
Sep 5 12:06:41 opsi in.tftpd[58431]: RRQ from 1.2.133.156 filename linux/pxelinux.cfg/0A-x86_64.conf
Sep 5 12:06:41 opsi in.tftpd[58432]: RRQ from 1.2.133.156 filename linux/pxelinux.cfg/0A.conf
Sep 5 12:06:41 opsi in.tftpd[58433]: RRQ from 1.2.133.156 filename linux/pxelinux.cfg/01-04-92-26-4b-2b-d4
Sep 5 12:06:41 opsi in.tftpd[58434]: RRQ from 1.2.133.156 filename linux/pxelinux.cfg/elilo-x86_64.conf
Sep 5 12:06:41 opsi in.tftpd[58435]: RRQ from 1.2.133.156 filename linux/pxelinux.cfg/elilo.conf
Sep 5 12:06:42 opsi snmpd[627]: Connection from UDP: [1.2.35.51]:53372->[1.2.35.37]:161
Sep 5 12:06:42 opsi snmpd[627]: Connection from UDP: [1.2.35.51]:53382->[1.2.35.37]:161
Sep 5 12:06:43 opsi snmpd[627]: Connection from UDP: [1.2.35.51]:56804->[1.2.35.37]:161
Sep 5 12:06:43 opsi snmpd[627]: Connection from UDP: [1.2.35.51]:56809->[1.2.35.37]:161
Sep 5 12:06:44 opsi snmpd[627]: Connection from UDP: [1.2.35.51]:64103->[1.2.35.37]:161
Sep 5 12:06:44 opsi snmpd[627]: Connection from UDP: [1.2.35.51]:64117->[1.2.35.37]:161
Sep 5 12:06:45 opsi snmpd[627]: Connection from UDP: [1.2.35.51]:63177->[1.2.35.37]:161
Sep 5 12:06:45 opsi snmpd[627]: Connection from UDP: [1.2.35.51]:63186->[1.2.35.37]:161

DPKG Opsi Liste:

rc opsi-atftpd 0.7.dfsg-9 amd64 advanced TFTP server - opsi version with pcre, fifo and max-blksize patches
ii opsi-configed 4.0.7.6.34-2 all OPSI config editor
ii opsi-directory-connector 31.1-1 all opsi directory connector.
ii opsi-linux-bootimage 20190522-1 all opsi bootimage for netboot tasks.
ii opsi-linux-support 4.1.1-3 all Configure system to be able to deploy Linux with opsi.
ii opsi-server 4.1.1.7-1 all opsi server configuration package
ii opsi-tftpd-hpa 5.2.8-49 amd64 HPA's tftp server
ii opsi-utils 4.1.1.32-2 all utilites for working with opsi.
ii opsiconfd 4.1.1.18-4 all opsi configuration service
ii opsipxeconfd 4.1.1.14-1 all opsi pxe configuration daemon
ii python-opsi 4.1.1.67-1 all opsi python library

Re: PXE Installation mit M.2 NVME

Verfasst: 10 Sep 2019, 10:42
von RobWo
Ich habe in der Zwischenzeit mal ein Upgrade gemacht.
Mein aktueller Stand:

Code: Alles auswählen

rc  opsi-atftpd                     0.7.dfsg-9                     amd64        advanced TFTP server - opsi version with pcre, fifo and max-blksize patches
ii  opsi-configed                   4.0.7.6.34-2                   all          OPSI config editor
ii  opsi-directory-connector        31.1-1                         all          opsi directory connector.
ii  opsi-linux-bootimage            20190805-3                     all          opsi bootimage for netboot tasks.
ii  opsi-linux-support              4.1.1-3                        all          Configure system to be able to deploy Linux with opsi.
ii  opsi-server                     4.1.1.8-1                      all          opsi server configuration package
ii  opsi-tftpd-hpa                  5.2.8-50                       amd64        HPA's tftp server
ii  opsi-utils                      4.1.1.33-2                     all          utilites for working with opsi.
ii  opsiconfd                       4.1.1.18-4                     all          opsi configuration service
ii  opsipxeconfd                    4.1.1.14-2                     all          opsi pxe configuration daemon
ii  python-opsi                     4.1.1.72-1                     all          opsi python library
Mit Legacy BIOS funktioniert die Installation...

Re: PXE Installation mit M.2 NVME

Verfasst: 13 Sep 2019, 12:16
von n.wenselowski
Hi,

wird die originale elilo.efi verwendet oder wurde diese mal ausgetauscht?
Bei Unklarheit: was ist die Ausgabe von:

Code: Alles auswählen

md5sum /tftpboot/linux/pxelinux.cfg/elilo.efi

Welches OS kommt zum Einsatz?


Gruß

Niko

Re: PXE Installation mit M.2 NVME

Verfasst: 16 Sep 2019, 10:07
von RobWo
f7640d8b192cbe24bf4be6e8656650c7
Das ist die MD5 Summe von der elilo.efi.

Wir haben win10-x64_4.1.0.1-3 versucht zu installieren.

Re: PXE Installation mit M.2 NVME

Verfasst: 16 Sep 2019, 11:22
von SisterOfMercy
Have you looked at the bios options? Perhaps "above 4G decoding" (64-bit pci stuff) needs to be turned off.

Re: PXE Installation mit M.2 NVME

Verfasst: 26 Sep 2019, 13:26
von n.wenselowski
Hi,

mit der md5-Summe ist es noch die von uns ausgelieferte elilo.efi und keine andere Implementierung.

Ich würde jetzt vermutlich mal prüfen inwiefern es Updates für die Board-Firmware gibt und versuchen dort die aktuellste Version einzuspielen. Es ist manchmal erstaunlich wie alt die Firmware der Geräte ist ;)


Gruß

Niko

Re: PXE Installation mit M.2 NVME

Verfasst: 08 Okt 2019, 09:31
von schuhj
Hallo zusammen,

wir haben hier wohl das gleiche Problem mit dem ASUS X299 (FW 1902) und elilo.
@RobWo gibt es auf eurer Seite etwas Neues zu dem Thema?

Code: Alles auswählen

ii  opsi-linux-bootimage             20190805-3                     all          opsi bootimage for netboot tasks.
ii  opsi-server                      4.1.1.8-1                      all          opsi server configuration package
ii  opsi-tftpd-hpa                   5.2.8-50                       amd64        HPA's tftp server
ii  opsi-utils                       4.1.1.33-2                     all          utilites for working with opsi.
ii  opsiconfd                        4.1.1.18-4                     all          opsi configuration service
ii  opsipxeconfd                     4.1.1.14-2                     all          opsi pxe configuration daemon
ii  python-opsi                      4.1.1.72-1                     all          opsi python library

f7640d8b192cbe24bf4be6e8656650c7  elilo.efi

Re: PXE Installation mit M.2 NVME

Verfasst: 08 Okt 2019, 16:30
von SisterOfMercy
Again, can you make sure 4G decoding is off in the bios?

It seems to be somewhere in the boot menu, on the same page as "fast boot" (?)

There is also a fw 2002 released earlier this month, with the helpful "Improve system performance and stability." in the release notes.