UEFI-Netboot "C:\OPSI\startnet.cmd nicht gefunden"

[lwt]

Hallo zusammen,

ich teste gerade die UEFI-Installation von win10-x64 auf einem Dell Optiplex.
Ich komme soweit das Win-PE gestartet wird, dann erhalte ich die Fehlermeldung das C:\OPSI\startnet.cmd nicht gefunden werden kann.

Das Problem wurde in diesem Thread schon mal behandelt, aber nicht gelöst: https://forum.uib.de/viewtopic.php?f=6& ... 16b#p46799

Ich denke das in meinem Fall auch das Problem ist das die Laufwerksbuchstaben falsch zugeordnet wurden.
Diskpart listet mir:
Volume 0 C Windows
Volume 1 D Winpe

Ich habe bereits getestet die Festplatte mit winpedisk zu überschreiben, um alle vorhandenen Partitionen zu löschen und habe die Installation dann noch einmal durchgeführt. Leider tritt der Fehler weiterhin auf.

Die Dell Geräte haben eine M2-SSD, die Treiber von Dell habe ich aber alle in das boot.wim von Winpe integriert.

Opsi-Version: opsi-server 4.1.1.7-1

Der Ablauf der Installation ist wie folgt:
- Das OPSI-Linux wird gestartet, Festplatten formatiert, Treiber kopiert, etc.
- Reboot
- Der erste start von Winpe funktioniert
- Windows Setup wird gestartet und installiert
- Reboot
- Fehlermeldung: Die Einstellungen für die unbeaufsichtigte Installation konnten beim Durchgang nicht angewendet werden [specialize]. -> OK
- Endlosschleife: Der Computer wurde unterwartet neugestartet .... Windows Installation kann nicht fortgesetzt wenrden...
- Jetzt muss ich im BIOS die Startreihenfolge von Windows Bootmanager auf UEFI: SK hynix SC401 SATA umstellen damit gestartet werden kann.
- Jetzt erhalte ich nach dem Starten die Fehlermeldung: C:\opsi\startnet.cmd The system cannot find the path specified.

Hat noch jemand einen Tipp für mich ?

[wolfbardo]

Ohne Bootimage log ists ein Blick in die Glaskugel ...

Gruss
Bardo

[lwt]

Vielen Dank für die Rückmeldung.
Ich habe oben noch den Ablauf des Setups ergänzt.

Hier ist noch die aktuelle bootimage Log:

Code: Alles auswählen

(0)       Jul 02 12:52:11 [opsiinit] opsi init script started
(1)       Jul 02 12:52:11 [opsiinit] opsi linux bootimage version: 20181213 (4.1)
(2)       Jul 02 12:52:11 [opsiinit] getBootParam(pwh): cmdline: BOOT_IMAGE=net0:/linux/install-x64  initrd=/linux/miniroot-x64.bz2 debug video=vesa:ywrap,mtrr vga=normal --no-log console=tty1 console=ttyS0 dn=landeswelle.de product=win10-x64 hn=lwt-pc-103 pckey=*** confidential *** service=https://10.42.20.171:4447/rpc
(3)       Jul 02 12:52:11 [opsiinit] boot param pwh=
(4)       Jul 02 12:52:11 [opsiinit] getBootParam(nodhcp): cmdline: BOOT_IMAGE=net0:/linux/install-x64  initrd=/linux/miniroot-x64.bz2 debug video=vesa:ywrap,mtrr vga=normal --no-log console=tty1 console=ttyS0 dn=landeswelle.de product=win10-x64 hn=lwt-pc-103 pckey=*** confidential *** service=https://10.42.20.171:4447/rpc
(5)       Jul 02 12:52:11 [opsiinit] boot param nodhcp=0
(6)       Jul 02 12:52:11 [opsiinit] getBootParam(hn): cmdline: BOOT_IMAGE=net0:/linux/install-x64  initrd=/linux/miniroot-x64.bz2 debug video=vesa:ywrap,mtrr vga=normal --no-log console=tty1 console=ttyS0 dn=landeswelle.de product=win10-x64 hn=lwt-pc-103 pckey=*** confidential *** service=https://10.42.20.171:4447/rpc
(7)       Jul 02 12:52:11 [opsiinit] boot param hn=lwt-pc-103
(8)       Jul 02 12:52:11 [opsiinit] getBootParam(lang): cmdline: BOOT_IMAGE=net0:/linux/install-x64  initrd=/linux/miniroot-x64.bz2 debug video=vesa:ywrap,mtrr vga=normal --no-log console=tty1 console=ttyS0 dn=landeswelle.de product=win10-x64 hn=lwt-pc-103 pckey=*** confidential *** service=https://10.42.20.171:4447/rpc
(9)       Jul 02 12:52:11 [opsiinit] boot param lang=
(10)      Jul 02 12:52:11 [opsiinit] loading keymap de-latin1-nodeadkeys
(11)      Jul 02 12:52:11 [opsiinit] setting language environment (LANG=de_DE.UTF8, LANGUAGE=de, LC_ALL=de_DE.UTF8)
(12)      Jul 02 12:52:11 [opsiinit] getNetworkDevices(): link forced
(13)      Jul 02 12:52:11 [opsiinit] getNetworkDevices(): device(s) found:  enp1s0, device(s) with link: 
(14)      Jul 02 12:52:11 [opsiinit] getNetworkDevices(): no devices with link found, returning error
(15)      Jul 02 12:52:11 [opsiinit] no devices found, sleeping 3 seconds
(16)      Jul 02 12:52:14 [opsiinit] getNetworkDevices(): link forced
(17)      Jul 02 12:52:15 [opsiinit] getNetworkDevices(): device(s) found:  enp1s0, device(s) with link: 
(18)      Jul 02 12:52:15 [opsiinit] getNetworkDevices(): no devices with link found, returning error
(19)      Jul 02 12:52:15 [opsiinit] no devices found, sleeping 3 seconds
(20)      Jul 02 12:52:18 [opsiinit] getNetworkDevices(): link forced
(21)      Jul 02 12:52:18 [opsiinit] getNetworkDevices(): device(s) found:  enp1s0, device(s) with link: 
(22)      Jul 02 12:52:18 [opsiinit] getNetworkDevices(): no devices with link found, returning error
(23)      Jul 02 12:52:18 [opsiinit] no devices found, sleeping 3 seconds
(24)      Jul 02 12:52:21 [opsiinit] getNetworkDevices(): link forced
(25)      Jul 02 12:52:21 [opsiinit] getNetworkDevices(): device(s) found:  enp1s0, device(s) with link: 
(26)      Jul 02 12:52:21 [opsiinit] getNetworkDevices(): no devices with link found, returning error
(27)      Jul 02 12:52:21 [opsiinit] no devices found, sleeping 3 seconds
(28)      Jul 02 12:52:24 [opsiinit] getNetworkDevices(): link forced
(29)      Jul 02 12:52:24 [opsiinit] getNetworkDevices(): device(s) found:  enp1s0, device(s) with link: 
(30)      Jul 02 12:52:24 [opsiinit] getNetworkDevices(): no devices with link found, returning error
(31)      Jul 02 12:52:24 [opsiinit] no devices found, sleeping 3 seconds
(32)      Jul 02 12:52:27 [opsiinit] getNetworkDevices(): link forced
(33)      Jul 02 12:52:27 [opsiinit] getNetworkDevices(): device(s) found:  enp1s0, device(s) with link: 
(34)      Jul 02 12:52:27 [opsiinit] getNetworkDevices(): no devices with link found, returning error
(35)      Jul 02 12:52:27 [opsiinit] no devices found, sleeping 3 seconds
(36)      Jul 02 12:52:30 [opsiinit] getNetworkDevices(): link forced
(37)      Jul 02 12:52:30 [opsiinit] getNetworkDevices(): device(s) found:  enp1s0, device(s) with link: 
(38)      Jul 02 12:52:30 [opsiinit] getNetworkDevices(): no devices with link found, returning error
(39)      Jul 02 12:52:30 [opsiinit] no devices found, sleeping 3 seconds
(40)      Jul 02 12:52:33 [opsiinit] getNetworkDevices(): link forced
(41)      Jul 02 12:52:33 [opsiinit] getNetworkDevices(): device(s) found:  enp1s0, device(s) with link: 
(42)      Jul 02 12:52:33 [opsiinit] getNetworkDevices(): no devices with link found, returning error
(43)      Jul 02 12:52:33 [opsiinit] no devices found, sleeping 3 seconds
(44)      Jul 02 12:52:36 [opsiinit] getNetworkDevices(): link forced
(45)      Jul 02 12:52:36 [opsiinit] getNetworkDevices(): device(s) found:  enp1s0, device(s) with link: 
(46)      Jul 02 12:52:36 [opsiinit] getNetworkDevices(): no devices with link found, returning error
(47)      Jul 02 12:52:36 [opsiinit] no devices found, sleeping 3 seconds
(48)      Jul 02 12:52:39 [opsiinit] getNetworkDevices(): link forced
(49)      Jul 02 12:52:39 [opsiinit] getNetworkDevices(): device(s) found:  enp1s0, device(s) with link: 
(50)      Jul 02 12:52:39 [opsiinit] getNetworkDevices(): no devices with link found, returning error
(51)      Jul 02 12:52:39 [opsiinit] no devices found, sleeping 3 seconds
(52)      Jul 02 12:52:42 [opsiinit] getNetworkDevices(): link forced
(53)      Jul 02 12:52:42 [opsiinit] getNetworkDevices(): device(s) found:  enp1s0, device(s) with link: 
(54)      Jul 02 12:52:42 [opsiinit] getNetworkDevices(): no devices with link found, returning error
(55)      Jul 02 12:52:42 [opsiinit] no devices found, sleeping 3 seconds
(56)      Jul 02 12:52:45 [opsiinit] getNetworkDevices(): link forced
(57)      Jul 02 12:52:45 [opsiinit] getNetworkDevices(): device(s) found:  enp1s0, device(s) with link: 
(58)      Jul 02 12:52:45 [opsiinit] getNetworkDevices(): no devices with link found, returning error
(59)      Jul 02 12:52:45 [opsiinit] no devices found, sleeping 3 seconds
(60)      Jul 02 12:52:48 [opsiinit] getNetworkDevices(): link forced
(61)      Jul 02 12:52:48 [opsiinit] getNetworkDevices(): device(s) found:  enp1s0, device(s) with link: 
(62)      Jul 02 12:52:48 [opsiinit] getNetworkDevices(): no devices with link found, returning error
(63)      Jul 02 12:52:48 [opsiinit] no devices found, sleeping 3 seconds
(64)      Jul 02 12:52:51 [opsiinit] getNetworkDevices(): link forced
(65)      Jul 02 12:52:51 [opsiinit] getNetworkDevices(): device(s) found:  enp1s0, device(s) with link: 
(66)      Jul 02 12:52:51 [opsiinit] getNetworkDevices(): no devices with link found, returning error
(67)      Jul 02 12:52:51 [opsiinit] no devices found, sleeping 3 seconds
(68)      Jul 02 12:52:54 [opsiinit] getNetworkDevices(): link forced
(69)      Jul 02 12:52:54 [opsiinit] getNetworkDevices(): device(s) found:  enp1s0, device(s) with link: 
(70)      Jul 02 12:52:54 [opsiinit] getNetworkDevices(): no devices with link found, returning error
(71)      Jul 02 12:52:54 [opsiinit] no devices found, sleeping 3 seconds
(72)      Jul 02 12:52:57 [opsiinit] getNetworkDevices(): link forced
(73)      Jul 02 12:52:57 [opsiinit] getNetworkDevices(): device(s) found:  enp1s0, device(s) with link: 
(74)      Jul 02 12:52:57 [opsiinit] getNetworkDevices(): no devices with link found, returning error
(75)      Jul 02 12:52:57 [opsiinit] no devices found, sleeping 3 seconds
(76)      Jul 02 12:53:00 [opsiinit] getNetworkDevices(): link forced
(77)      Jul 02 12:53:00 [opsiinit] getNetworkDevices(): device(s) found:  enp1s0, device(s) with link: 
(78)      Jul 02 12:53:00 [opsiinit] getNetworkDevices(): no devices with link found, returning error
(79)      Jul 02 12:53:00 [opsiinit] no devices found, sleeping 3 seconds
(80)      Jul 02 12:53:03 [opsiinit] getNetworkDevices(): link forced
(81)      Jul 02 12:53:03 [opsiinit] getNetworkDevices(): device(s) found:  enp1s0, device(s) with link: 
(82)      Jul 02 12:53:03 [opsiinit] getNetworkDevices(): no devices with link found, returning error
(83)      Jul 02 12:53:03 [opsiinit] no devices found, sleeping 3 seconds
(84)      Jul 02 12:53:06 [opsiinit] getNetworkDevices(): link forced
(85)      Jul 02 12:53:06 [opsiinit] getNetworkDevices(): device(s) found:  enp1s0, device(s) with link: 
(86)      Jul 02 12:53:06 [opsiinit] getNetworkDevices(): no devices with link found, returning error
(87)      Jul 02 12:53:06 [opsiinit] no devices found, sleeping 3 seconds
(88)      Jul 02 12:53:09 [opsiinit] getNetworkDevices(): link forced
(89)      Jul 02 12:53:09 [opsiinit] getNetworkDevices(): device(s) found:  enp1s0, device(s) with link: 
(90)      Jul 02 12:53:09 [opsiinit] getNetworkDevices(): no devices with link found, returning error
(91)      Jul 02 12:53:09 [opsiinit] no devices found, sleeping 3 seconds
(92)      Jul 02 12:53:12 [opsiinit] getNetworkDevices(): device(s) found:  enp1s0, device(s) with link: 
(93)      Jul 02 12:53:12 [opsiinit] getNetworkDevices(): no devices with link found, returning  enp1s0
(94)      Jul 02 12:53:12 [opsiinit] using dhcp, adding entry for device enp1s0 to /etc/netplan/01-enp1s0.yaml
(95)      Jul 02 12:53:22 [opsiinit] Setting hostname to lwt-pc-103 as supplied by cmdline
(96)      Jul 02 12:53:22 [opsiinit] opsi init script ended
(929)     [5] [Jul 02 12:53:28] Detected link on device 'enp1s0' (master.py|677)
(930)     [5] [Jul 02 12:53:28] No file dhclient.enp1s0.leases found (master.py|688)
(931)     [5] [Jul 02 12:53:28] Waiting for network devices to get configured by dhcp (master.py|734)
(950)     [5] [Jul 02 12:53:28] All network devices configured (master.py|747)
(951)     [5] [Jul 02 12:53:28] leases: enp1s0:/var/lib/dhcp/dhclient.leases (master.py|771)
(952)     [5] [Jul 02 12:53:28] Getting dhcp result for device: enp1s0 (master.py|775)
(1031)    [5] [Jul 02 12:53:29] Product-id is 'win10-x64' (master.py|1177)
(1044)    [5] [Jul 02 12:53:29] Fetching product properties... (master.py|1204)
(1057)    [5] [Jul 02 12:53:29] Fetching config states... (master.py|1214)
(1070)    [5] [Jul 02 12:53:29] Requesting product license... (master.py|1224)
(1071)    [5] [Jul 02 12:53:29] Using product property to get licensekey (master.py|1231)
(1073)    [5] [Jul 02 12:53:29] Fetching pcpatch password... (master.py|1237)
(1093)    [5] [Jul 02 12:53:30] try to load efivars module: modprobe efivars (master.py|567)
(1097)    [5] [Jul 02 12:53:30] check if we run in uefi mode (master.py|573)
(1098)    [5] [Jul 02 12:53:30] we are running in uefi mode (master.py|577)
(1111)    [5] [Jul 02 12:53:30] found valid uefi license in old modules (master.py|1340)
(1112)    [5] [Jul 02 12:53:30] Copying action script 'win10-x64/setup.py' from depot to '/tmp/setup.py' (master.py|1354)
(1163)    [5] [Jul 02 12:53:30] ############################################################## (setup.py|38)
(1164)    [5] [Jul 02 12:53:30] initOpsiSetupLib() (opsisetuplib.py|30)
(1165)    [5] [Jul 02 12:53:30] OpsiSetupLib $Revision$ (opsisetuplib.py|31)
(1166)    [5] [Jul 02 12:53:30] OpsiSetupLib $Date$ (opsisetuplib.py|32)
(1167)    [5] [Jul 02 12:53:30] nt6.py (setup.py|40)
(1168)    [5] [Jul 02 12:53:30] ############################################################## (setup.py|42)
(1169)    [5] [Jul 02 12:53:30] Installing Product: win10-x64_4.1.0.0-15 on lwt-pc-103.landeswelle.de (setup.py|50)
(1170)    [5] [Jul 02 12:53:30] ############################################################## (setup.py|53)
(1177)    [5] [Jul 02 12:53:30] Installed opsi-script: opsi-winst_4.12.0.35  (setup.py|63)
(1179)    [5] [Jul 02 12:53:30] try to load efivars module: modprobe efivars (opsisetuplib.py|548)
(1183)    [5] [Jul 02 12:53:30] check if we run in uefi mode (opsisetuplib.py|555)
(1184)    [5] [Jul 02 12:53:30] we are running in uefi mode (opsisetuplib.py|560)
(1185)    [5] [Jul 02 12:53:30] We install to disk (setup.py|77)
(1186)    [5] [Jul 02 12:53:30] useRaid1 is False (setup.py|209)
(1187)    [5] [Jul 02 12:53:30] preserve_winpe_partition is False (setup.py|214)
(1188)    [5] [Jul 02 12:53:30] preserve_winpe_partition is False (setup.py|218)
(1189)    [5] [Jul 02 12:53:30] Using installfiles_dir: installfiles (setup.py|225)
(1190)    [5] [Jul 02 12:53:30] winpe_debug_cmd_exe = False (setup.py|249)
(1191)    [5] [Jul 02 12:53:30] Determine if we have to localize the administrator (setup.py|302)
(1192)    [5] [Jul 02 12:53:30] peres found - we use peres -v to get setup.exe fileversion (setup.py|312)
(1197)    [5] [Jul 02 12:53:30] winver is 10 (setup.py|345)
(1198)    [5] [Jul 02 12:53:30] we localize because winver 10 is >= 10 (setup.py|348)
(1199)    [5] [Jul 02 12:53:30] We use as administrator: Administrator (setup.py|372)
(1200)    [5] [Jul 02 12:53:30] Partition numbers are now: , boot=0, system=3, winpe=4, data=0 (setup.py|425)
(1201)    [5] [Jul 02 12:53:30] Fetching opsi hw audit configuration (setup.py|499)
(1208)    [5] [Jul 02 12:53:31] Running hardware inventory (setup.py|502)
(2842)    [3] [Jul 02 12:53:32] local variable 'descriptor' referenced before assignment (Posix.py|3414)
(3805)    [4] [Jul 02 12:53:32] Attribute part 'id' not found (Posix.py|3560)
(3813)    [4] [Jul 02 12:53:32] Attribute part 'product' not found (Posix.py|3560)
(3814)    [4] [Jul 02 12:53:32] Attribute part 'serial' not found (Posix.py|3560)
(3844)    [4] [Jul 02 12:53:32] Attribute part 'serial' not found (Posix.py|3560)
(3846)    [4] [Jul 02 12:53:32] Attribute part 'serial' not found (Posix.py|3560)
(3848)    [4] [Jul 02 12:53:32] Attribute part 'serial' not found (Posix.py|3560)
(3850)    [4] [Jul 02 12:53:32] Attribute part 'serial' not found (Posix.py|3560)
(3852)    [4] [Jul 02 12:53:32] Attribute part 'serial' not found (Posix.py|3560)
(3854)    [4] [Jul 02 12:53:32] Attribute part 'serial' not found (Posix.py|3560)
(3856)    [4] [Jul 02 12:53:32] Attribute part 'serial' not found (Posix.py|3560)
(3858)    [4] [Jul 02 12:53:32] Attribute part 'serial' not found (Posix.py|3560)
(3861)    [4] [Jul 02 12:53:32] Attribute part 'serial' not found (Posix.py|3560)
(3863)    [4] [Jul 02 12:53:32] Attribute part 'serial' not found (Posix.py|3560)
(3865)    [4] [Jul 02 12:53:32] Attribute part 'serial' not found (Posix.py|3560)
(3867)    [4] [Jul 02 12:53:32] Attribute part 'serial' not found (Posix.py|3560)
(3869)    [4] [Jul 02 12:53:32] Attribute part 'serial' not found (Posix.py|3560)
(3871)    [4] [Jul 02 12:53:32] Attribute part 'serial' not found (Posix.py|3560)
(3880)    [4] [Jul 02 12:53:32] Attribute part 'serial' not found (Posix.py|3560)
(3881)    [4] [Jul 02 12:53:32] Attribute part 'port' not found (Posix.py|3560)
(3882)    [4] [Jul 02 12:53:32] Attribute part 'capacity' not found (Posix.py|3560)
(3883)    [4] [Jul 02 12:53:32] Attribute part 'serial' not found (Posix.py|3560)
(3884)    [4] [Jul 02 12:53:32] Attribute part 'link' not found (Posix.py|3560)
(3885)    [4] [Jul 02 12:53:32] Attribute part 'autonegotiation' not found (Posix.py|3560)
(3886)    [4] [Jul 02 12:53:32] Attribute part 'ip' not found (Posix.py|3560)
(3887)    [4] [Jul 02 12:53:32] Attribute part 'product' not found (Posix.py|3560)
(3888)    [4] [Jul 02 12:53:32] Attribute part 'vendor' not found (Posix.py|3560)
(3889)    [4] [Jul 02 12:53:32] Attribute part 'product' not found (Posix.py|3560)
(3890)    [4] [Jul 02 12:53:32] Attribute part 'vendorId' not found (Posix.py|3560)
(3891)    [4] [Jul 02 12:53:32] Attribute part 'deviceId' not found (Posix.py|3560)
(3892)    [4] [Jul 02 12:53:32] Attribute part 'subsystemVendorId' not found (Posix.py|3560)
(3893)    [4] [Jul 02 12:53:32] Attribute part 'subsystemDeviceId' not found (Posix.py|3560)
(3894)    [4] [Jul 02 12:53:32] Attribute part 'revision' not found (Posix.py|3560)
(3895)    [4] [Jul 02 12:53:32] Attribute part 'port' not found (Posix.py|3560)
(3896)    [4] [Jul 02 12:53:32] Attribute part 'capacity' not found (Posix.py|3560)
(3897)    [4] [Jul 02 12:53:32] Attribute part 'ip' not found (Posix.py|3560)
(3898)    [4] [Jul 02 12:53:32] Attribute part 'product' not found (Posix.py|3560)
(3899)    [4] [Jul 02 12:53:32] Attribute part 'vendor' not found (Posix.py|3560)
(3900)    [4] [Jul 02 12:53:32] Attribute part 'product' not found (Posix.py|3560)
(3901)    [4] [Jul 02 12:53:32] Attribute part 'vendorId' not found (Posix.py|3560)
(3902)    [4] [Jul 02 12:53:32] Attribute part 'deviceId' not found (Posix.py|3560)
(3903)    [4] [Jul 02 12:53:32] Attribute part 'subsystemVendorId' not found (Posix.py|3560)
(3904)    [4] [Jul 02 12:53:32] Attribute part 'subsystemDeviceId' not found (Posix.py|3560)
(3905)    [4] [Jul 02 12:53:32] Attribute part 'revision' not found (Posix.py|3560)
(3906)    [4] [Jul 02 12:53:32] Attribute part 'port' not found (Posix.py|3560)
(3907)    [4] [Jul 02 12:53:32] Attribute part 'capacity' not found (Posix.py|3560)
(3908)    [4] [Jul 02 12:53:32] Attribute part 'link' not found (Posix.py|3560)
(3909)    [4] [Jul 02 12:53:32] Attribute part 'autonegotiation' not found (Posix.py|3560)
(3910)    [4] [Jul 02 12:53:32] Attribute part 'ip' not found (Posix.py|3560)
(3913)    [4] [Jul 02 12:53:32] Attribute part 'serial' not found (Posix.py|3560)
(3919)    [4] [Jul 02 12:53:32] Attribute part 'product' not found (Posix.py|3560)
(3920)    [4] [Jul 02 12:53:32] Attribute part 'description' not found (Posix.py|3560)
(3921)    [4] [Jul 02 12:53:32] Attribute part 'vendor' not found (Posix.py|3560)
(3922)    [4] [Jul 02 12:53:32] Attribute part 'product' not found (Posix.py|3560)
(3923)    [4] [Jul 02 12:53:32] Attribute part 'serial' not found (Posix.py|3560)
(3924)    [4] [Jul 02 12:53:32] Attribute part 'vendorId' not found (Posix.py|3560)
(3925)    [4] [Jul 02 12:53:32] Attribute part 'deviceId' not found (Posix.py|3560)
(3926)    [4] [Jul 02 12:53:32] Attribute part 'subsystemVendorId' not found (Posix.py|3560)
(3927)    [4] [Jul 02 12:53:32] Attribute part 'subsystemDeviceId' not found (Posix.py|3560)
(3928)    [4] [Jul 02 12:53:32] Attribute part 'revision' not found (Posix.py|3560)
(3933)    [4] [Jul 02 12:53:32] Attribute part 'serial' not found (Posix.py|3560)
(3934)    [4] [Jul 02 12:53:32] Attribute part 'description' not found (Posix.py|3560)
(3935)    [4] [Jul 02 12:53:32] Attribute part 'serial' not found (Posix.py|3560)
(3936)    [4] [Jul 02 12:53:32] Attribute part 'vendorId' not found (Posix.py|3560)
(3937)    [4] [Jul 02 12:53:32] Attribute part 'deviceId' not found (Posix.py|3560)
(3938)    [4] [Jul 02 12:53:32] Attribute part 'subsystemVendorId' not found (Posix.py|3560)
(3939)    [4] [Jul 02 12:53:32] Attribute part 'subsystemDeviceId' not found (Posix.py|3560)
(3940)    [4] [Jul 02 12:53:32] Attribute part 'revision' not found (Posix.py|3560)
(3941)    [4] [Jul 02 12:53:32] Attribute part 'description' not found (Posix.py|3560)
(3942)    [4] [Jul 02 12:53:32] Attribute part 'serial' not found (Posix.py|3560)
(3943)    [4] [Jul 02 12:53:32] Attribute part 'vendorId' not found (Posix.py|3560)
(3944)    [4] [Jul 02 12:53:32] Attribute part 'deviceId' not found (Posix.py|3560)
(3945)    [4] [Jul 02 12:53:32] Attribute part 'subsystemVendorId' not found (Posix.py|3560)
(3946)    [4] [Jul 02 12:53:32] Attribute part 'subsystemDeviceId' not found (Posix.py|3560)
(3947)    [4] [Jul 02 12:53:32] Attribute part 'revision' not found (Posix.py|3560)
(3958)    [4] [Jul 02 12:53:32] Attribute part 'serial' not found (Posix.py|3560)
(3959)    [4] [Jul 02 12:53:32] Attribute part 'size' not found (Posix.py|3560)
(3961)    [4] [Jul 02 12:53:32] Attribute part 'vendor' not found (Posix.py|3560)
(4005)    [5] [Jul 02 12:53:32] Sending hardware information to service (setup.py|505)
(4018)    [5] [Jul 02 12:53:34] Swapoff all to avoid disk in use ..... (setup.py|509)
(4022)    [5] [Jul 02 12:53:34] Clear all existing LVM volume groups.... (opsisetuplib.py|173)
(4026)    [5] [Jul 02 12:53:34] Remove all dead Links in /dev.... (opsisetuplib.py|193)
(4030)    [5] [Jul 02 12:53:34] Remove all empty directories in /dev.... (opsisetuplib.py|195)
(4031)    [5] [Jul 02 12:53:34] Look for still existing LVM volume groups.... (opsisetuplib.py|198)
(4051)    [3] [Jul 02 12:53:34] Command '/sbin/modprobe edd' failed (1):
(4052)    modprobe: ERROR: could not insert 'edd': No such device (Posix.py|1376)
(4161)    [5] [Jul 02 12:53:34] Disk order: (opsisetuplib.py|78)
(4162)    [5] [Jul 02 12:53:34]  - /dev/sda (rotational? False) (sizeG 238) (uuid 31e184bc-94ce-4097-b2e9-c34c4a203f8b) (opsisetuplib.py|80)
(4163)    [5] [Jul 02 12:53:34] Normally we using disk 0 (setup.py|516)
(4178)    [3] [Jul 02 12:53:34] Command '/sbin/modprobe edd' failed (1):
(4179)    modprobe: ERROR: could not insert 'edd': No such device (Posix.py|1376)
(4287)    [5] [Jul 02 12:53:35] multi_disk_mode is 0 - so we use disk number: 0 uuid:31e184bc-94ce-4097-b2e9-c34c4a203f8b (setup.py|519)
(4288)    [5] [Jul 02 12:53:35] Using disk device /dev/sda (setup.py|521)
(4289)    [5] [Jul 02 12:53:35] Check if disk /dev/sda is ssd or classic (rotational) HD (opsisetuplib.py|85)
(4290)    [5] [Jul 02 12:53:35] Disk /dev/sda is not rotational (SSD) (opsisetuplib.py|101)
(4291)    [5] [Jul 02 12:53:35] Required winpe partition (4) size is 4000M (setup.py|549)
(4292)    [5] [Jul 02 12:53:35] /mnt/hd does not exists as directory - creating (opsisetuplib.py|401)
(4296)    [5] [Jul 02 12:53:35] maxDiskRange is 1 (setup.py|863)
(4297)    [5] [Jul 02 12:53:35] diskcounter is now 0 (setup.py|866)
(4298)    [5] [Jul 02 12:53:35] Disk order: (opsisetuplib.py|78)
(4299)    [5] [Jul 02 12:53:35]  - /dev/sda (rotational? False) (sizeG 238) (uuid 31e184bc-94ce-4097-b2e9-c34c4a203f8b) (opsisetuplib.py|80)
(4300)    [5] [Jul 02 12:53:35] Using disk device /dev/sda (setup.py|869)
(4301)    [5] [Jul 02 12:53:35] Check if disk /dev/sda is ssd or classic (rotational) HD (opsisetuplib.py|85)
(4302)    [5] [Jul 02 12:53:35] Disk /dev/sda is not rotational (SSD) (opsisetuplib.py|101)
(4303)    [5] [Jul 02 12:53:35] Clear first 512 bytes on /dev/sda to remove grub and so on ... (setup.py|891)
(4308)    [5] [Jul 02 12:53:37] Clear partition table of /dev/sda (setup.py|896)
(4325)    [5] [Jul 02 12:53:39] Create EFI system partition on /dev/sda1 (setup.py|900)
(4362)    [5] [Jul 02 12:53:42] Make file system on EFI system partition on /dev/sda1 (setup.py|904)
(4367)    [5] [Jul 02 12:53:42] Create MS reserved partition on /dev/sda2 (setup.py|906)
(4405)    [5] [Jul 02 12:53:43] Create system partition on /dev/sda3 start: 0M, size: 239198M (opsisetuplib.py|271)
(4446)    [5] [Jul 02 12:53:47] /dev/sda3 exists as device - fine (opsisetuplib.py|256)
(4447)    [5] [Jul 02 12:53:47] Partition /dev/sda3 has a correct block alignment (opsisetuplib.py|164)
(4458)    [5] [Jul 02 12:53:47] Create file system ntfs on partition system (/dev/sda3) (opsisetuplib.py|347)
(4474)    [5] [Jul 02 12:54:02] /dev/sda3 exists as device - fine (opsisetuplib.py|337)
(4475)    [5] [Jul 02 12:54:02] /dev/sda3 created and formated (opsisetuplib.py|373)
(4476)    [5] [Jul 02 12:54:02] Check winpe partition (setup.py|986)
(4477)    [5] [Jul 02 12:54:02] Check winpe partition at number 4 (setup.py|988)
(4478)    [5] [Jul 02 12:54:02] Create winpe partition on /dev/sda4 start: 240198M, size: 4000M (opsisetuplib.py|271)
(4521)    [5] [Jul 02 12:54:05] /dev/sda4 exists as device - fine (opsisetuplib.py|256)
(4522)    [5] [Jul 02 12:54:05] Partition /dev/sda4 has a correct block alignment (opsisetuplib.py|164)
(4523)    [5] [Jul 02 12:54:05] /dev/sda4 exists as device - fine (opsisetuplib.py|256)
(4524)    [5] [Jul 02 12:54:05] Partition /dev/sda4 has a correct block alignment (opsisetuplib.py|164)
(4525)    [5] [Jul 02 12:54:05] /dev/sda4 is not mounted (opsisetuplib.py|459)
(4526)    [5] [Jul 02 12:54:05] We use fat32 for winpe because we are on uefi (setup.py|1090)
(4527)    [5] [Jul 02 12:54:05] Create file system fat32 on partition winpe (/dev/sda4) (opsisetuplib.py|347)
(4542)    [5] [Jul 02 12:54:21] /dev/sda4 exists as device - fine (opsisetuplib.py|337)
(4543)    [5] [Jul 02 12:54:21] /dev/sda4 created and formated (opsisetuplib.py|373)
(4544)    [5] [Jul 02 12:54:21] check efi boot order (setup.py|1171)
(4573)    [5] [Jul 02 12:54:23] collect disk and partition infos (setup.py|1193)
(4574)    [5] [Jul 02 12:54:23] we have uuid 9af985ee-fe08-4f09-b86e-aca17cf71492 on /dev/sda (setup.py|1195)
(4582)    [5] [Jul 02 12:54:23] We save all partition infos .... (setup.py|1234)
(4583)    [5] [Jul 02 12:54:23] Check if disk /dev/sda is raid member (opsisetuplib.py|139)
(4584)    [5] [Jul 02 12:54:23] Disk /dev/sda is no (Soft/Fake) Raid Member (opsisetuplib.py|154)
(4585)    [5] [Jul 02 12:54:23] Check if disk /dev/sda is raid  HD (opsisetuplib.py|107)
(4586)    [5] [Jul 02 12:54:23] Disk /dev/sda is no (Soft/Fake) Raid (opsisetuplib.py|133)
(4602)    [5] [Jul 02 12:54:23] has disk /dev/sda a gpt partition table ? (setup.py|1247)
(4603)    [5] [Jul 02 12:54:23] disk /dev/sda have a gpt partition table: (setup.py|1254)
(4622)    [5] [Jul 02 12:54:23] We have 4 partitions on disk /dev/sda (setup.py|1262)
(4623)    [5] [Jul 02 12:54:23] We have uuid 9af985ee-fe08-4f09-b86e-aca17cf71492  on disk /dev/sda (setup.py|1264)
(4640)    [5] [Jul 02 12:54:23] mount winpe partition (setup.py|1319)
(4641)    [5] [Jul 02 12:54:23] mountpoint /mnt/hd exists (opsisetuplib.py|415)
(4642)    [5] [Jul 02 12:54:23] mountpoint /mnt/hd >> /dev/null 2>&1 (opsisetuplib.py|420)
(4643)    [5] [Jul 02 12:54:23] Nothing mounted on /mnt/hd - fine (opsisetuplib.py|435)
(4644)    [5] [Jul 02 12:54:23] /dev/sda4 is not mounted (opsisetuplib.py|459)
(4645)    [5] [Jul 02 12:54:23] We use vfat for winpe because we are on uefi (setup.py|1323)
(4649)    [5] [Jul 02 12:54:23]  mount -t vfat /dev/sda4 /mnt/hd (opsisetuplib.py|475)
(4650)    [5] [Jul 02 12:54:28] /dev/sda4 mounted on /mnt/hd - fine.. (opsisetuplib.py|483)
(10689)   [5] [Jul 02 12:55:26] Found driver for PCI_DEVICE device '8th Gen Core Processor Host Bridge_DRAM Registers', in dir 'win10-x64/drivers/pciids/8086/3EC2' (WindowsDrivers.py|117)
(10691)   [5] [Jul 02 12:55:36] Found driver for PCI_DEVICE device 'UHD Graphics 630 (Desktop)', in dir 'win10-x64/drivers/pciids/8086/3E92' (WindowsDrivers.py|117)
(10693)   [5] [Jul 02 12:55:36] Found driver for PCI_DEVICE device 'Xeon E3-1200 v5_v6 _ E3-1500 v5 _ 6th_7th Gen Core Processor Gaussian Mixture Model', in dir 'win10-x64/drivers/pciids/8086/1911' (WindowsDrivers.py|117)
(10695)   [5] [Jul 02 12:55:36] Found driver for PCI_DEVICE device 'Cannon Lake PCH Thermal Controller', in dir 'win10-x64/drivers/pciids/8086/A379' (WindowsDrivers.py|117)
(10697)   [3] [Jul 02 12:55:36] PCI_DEVICE device directory 'win10-x64/drivers/pciids/8086/A36D' not found (WindowsDrivers.py|108)
(10699)   [3] [Jul 02 12:55:36] PCI_DEVICE device directory 'win10-x64/drivers/pciids/8086/A36F' not found (WindowsDrivers.py|108)
(10701)   [5] [Jul 02 12:55:36] Found driver for PCI_DEVICE device 'Cannon Lake PCH HECI Controller', in dir 'win10-x64/drivers/pciids/8086/A360' (WindowsDrivers.py|117)
(10703)   [5] [Jul 02 12:55:36] Found driver for PCI_DEVICE device 'SATA Controller [RAID mode]', in dir 'win10-x64/drivers/pciids/8086/2822' (WindowsDrivers.py|117)
(10705)   [5] [Jul 02 12:55:36] Found driver for PCI_DEVICE device 'Cannon Lake PCH PCI Express Root Port #5', in dir 'win10-x64/drivers/pciids/8086/A33C' (WindowsDrivers.py|117)
(10707)   [5] [Jul 02 12:55:36] Found driver for PCI_DEVICE device 'RTL8111_8168_8411 PCI Express Gigabit Ethernet Controller', in dir 'win10-x64/drivers/pciids/10EC/8168' (WindowsDrivers.py|117)
(10709)   [5] [Jul 02 12:55:36] Found driver for PCI_DEVICE device 'Cannon Lake PCH PCI Express Root Port #8', in dir 'win10-x64/drivers/pciids/8086/A33F' (WindowsDrivers.py|117)
(10711)   [5] [Jul 02 12:55:36] Found driver for PCI_DEVICE device 'QCA9377 802.11ac Wireless Network Adapter', in dir 'win10-x64/drivers/pciids/168C/0042' (WindowsDrivers.py|117)
(10713)   [5] [Jul 02 12:55:36] Found driver for PCI_DEVICE device 'H370 Chipset LPC_eSPI Controller', in dir 'win10-x64/drivers/pciids/8086/A304' (WindowsDrivers.py|117)
(10715)   [3] [Jul 02 12:55:36] PCI_DEVICE device directory 'win10-x64/drivers/pciids/8086/A348' not found (WindowsDrivers.py|108)
(10717)   [5] [Jul 02 12:55:36] Found driver for PCI_DEVICE device 'Cannon Lake PCH SMBus Controller', in dir 'win10-x64/drivers/pciids/8086/A323' (WindowsDrivers.py|117)
(10719)   [5] [Jul 02 12:55:37] Found driver for PCI_DEVICE device 'Cannon Lake PCH SPI Controller', in dir 'win10-x64/drivers/pciids/8086/A324' (WindowsDrivers.py|117)
(10740)   [5] [Jul 02 12:55:37] Found driver for HDAUDIO_DEVICE device 'Realtek ALC3234', in dir 'win10-x64/drivers/hdaudioids/10EC/0255' (WindowsDrivers.py|117)
(10742)   [5] [Jul 02 12:55:37] Found driver for HDAUDIO_DEVICE device 'Intel Kabylake HDMI', in dir 'win10-x64/drivers/hdaudioids/8086/280B' (WindowsDrivers.py|117)
(10762)   [5] [Jul 02 12:55:37] Integrating driver for device [8086:3EC2] Intel Corporation : 8th Gen Core Processor Host Bridge/DRAM Registers (WindowsDrivers.py|303)
(10763)   [5] [Jul 02 12:55:37] Integrating driver for device [8086:3E92] Intel Corporation : UHD Graphics 630 (Desktop) (WindowsDrivers.py|303)
(10764)   [5] [Jul 02 12:55:37] Integrating driver for device [8086:1911] Intel Corporation : Xeon E3-1200 v5/v6 / E3-1500 v5 / 6th/7th Gen Core Processor Gaussian Mixture Model (WindowsDrivers.py|303)
(10765)   [5] [Jul 02 12:55:37] Integrating driver for device [8086:A379] Intel Corporation : Cannon Lake PCH Thermal Controller (WindowsDrivers.py|303)
(10766)   [5] [Jul 02 12:55:37] Integrating driver for device [8086:A360] Intel Corporation : Cannon Lake PCH HECI Controller (WindowsDrivers.py|303)
(10767)   [5] [Jul 02 12:55:37] Integrating driver for device [8086:2822] Intel Corporation : SATA Controller [RAID mode] (WindowsDrivers.py|303)
(10768)   [5] [Jul 02 12:55:37] Integrating driver for device [8086:A33C] Intel Corporation : Cannon Lake PCH PCI Express Root Port #5 (WindowsDrivers.py|303)
(10769)   [5] [Jul 02 12:55:37] Integrating driver for device [10EC:8168] Realtek Semiconductor Co., Ltd. : RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (WindowsDrivers.py|303)
(10770)   [5] [Jul 02 12:55:37] Integrating driver for device [8086:A33F] Intel Corporation : Cannon Lake PCH PCI Express Root Port #8 (WindowsDrivers.py|303)
(10771)   [5] [Jul 02 12:55:37] Integrating driver for device [168C:0042] Qualcomm Atheros : QCA9377 802.11ac Wireless Network Adapter (WindowsDrivers.py|303)
(10772)   [5] [Jul 02 12:55:37] Integrating driver for device [8086:A304] Intel Corporation : H370 Chipset LPC/eSPI Controller (WindowsDrivers.py|303)
(10773)   [5] [Jul 02 12:55:37] Integrating driver for device [8086:A323] Intel Corporation : Cannon Lake PCH SMBus Controller (WindowsDrivers.py|303)
(10774)   [5] [Jul 02 12:55:37] Integrating driver for device [8086:A324] Intel Corporation : Cannon Lake PCH SPI Controller (WindowsDrivers.py|303)
(10775)   [5] [Jul 02 12:55:37] Integrating driver for device [10EC:0255] : Realtek ALC3234 (WindowsDrivers.py|303)
(10776)   [5] [Jul 02 12:55:37] Integrating driver for device [8086:280B] : Intel Kabylake HDMI (WindowsDrivers.py|303)
(10779)   [5] [Jul 02 12:55:37] Integrating driver dir 'win10-x64/drivers/pciids/8086/3EC2' (WindowsDrivers.py|202)
(10824)   [5] [Jul 02 12:55:37] Integrating driver dir 'win10-x64/drivers/pciids/8086/3E92' (WindowsDrivers.py|202)
(12131)   [5] [Jul 02 12:56:04] Integrating driver dir 'win10-x64/drivers/pciids/8086/1911' (WindowsDrivers.py|202)
(12176)   [5] [Jul 02 12:56:04] Integrating driver dir 'win10-x64/drivers/pciids/8086/A379' (WindowsDrivers.py|202)
(12221)   [5] [Jul 02 12:56:04] Integrating driver dir 'win10-x64/drivers/pciids/8086/A360' (WindowsDrivers.py|202)
(12262)   [5] [Jul 02 12:56:04] Integrating driver dir 'win10-x64/drivers/pciids/8086/2822' (WindowsDrivers.py|202)
(12401)   [5] [Jul 02 12:56:04] Integrating driver dir 'win10-x64/drivers/pciids/8086/A33C' (WindowsDrivers.py|202)
(12446)   [5] [Jul 02 12:56:05] Integrating driver dir 'win10-x64/drivers/pciids/10EC/8168' (WindowsDrivers.py|202)
(12485)   [5] [Jul 02 12:56:05] Integrating driver dir 'win10-x64/drivers/pciids/8086/A33F' (WindowsDrivers.py|202)
(12500)   [5] [Jul 02 12:56:05] Driver for PCI device 8086:A304 already integrated (WindowsDrivers.py|239)
(12501)   [5] [Jul 02 12:56:05] Integrating driver dir 'win10-x64/drivers/pciids/168C/0042' (WindowsDrivers.py|202)
(12614)   [5] [Jul 02 12:56:06] Integrating driver dir 'win10-x64/drivers/pciids/8086/A304' (WindowsDrivers.py|202)
(12629)   [5] [Jul 02 12:56:06] Driver for PCI device 8086:A304 already integrated (WindowsDrivers.py|239)
(12630)   [5] [Jul 02 12:56:06] Integrating driver dir 'win10-x64/drivers/pciids/8086/A323' (WindowsDrivers.py|202)
(12645)   [5] [Jul 02 12:56:06] Driver for PCI device 8086:A304 already integrated (WindowsDrivers.py|239)
(12646)   [5] [Jul 02 12:56:06] Integrating driver dir 'win10-x64/drivers/pciids/8086/A324' (WindowsDrivers.py|202)
(12661)   [5] [Jul 02 12:56:06] Driver for PCI device 8086:A304 already integrated (WindowsDrivers.py|239)
(12662)   [5] [Jul 02 12:56:06] Integrating driver dir 'win10-x64/drivers/hdaudioids/10EC/0255' (WindowsDrivers.py|202)
(13033)   [5] [Jul 02 12:56:10] Integrating driver dir 'win10-x64/drivers/hdaudioids/8086/280B' (WindowsDrivers.py|202)
(13085)   [5] [Jul 02 12:56:10] Driver for PCI device 8086:3E92 already integrated (WindowsDrivers.py|239)
(13086)   [5] [Jul 02 12:56:10] Creating work.cmd (setup.py|1390)
(13240)   [5] [Jul 02 12:56:12] Adding found driver c:\drv\8\rt640x64.inf to drvloadlist_org.txt
 (setup.py|1418)
(13288)   [5] [Jul 02 12:56:12] Here comes the /mnt/hd/opsi/drvloadlist_org.txt (setup.py|1426)
(13299)   [5] [Jul 02 12:56:12] Creating startnet.cmd (setup.py|1497)
(13300)   [5] [Jul 02 12:56:12] Creating diskpart.txt to delete winpe (setup.py|1533)
(13301)   [5] [Jul 02 12:56:12] No Partition IDs to backup - do not create /mnt/hd/opsi/partunhide.txt (setup.py|1580)
(13302)   [5] [Jul 02 12:56:12] No Partition IDs to backup - do not create /mnt/hd/opsi/parthide.txt (setup.py|1601)
(13303)   [5] [Jul 02 12:56:12] write disk and partition infos to /mnt/hd/opsi/diskinfo.ini (setup.py|1607)
(13304)   [5] [Jul 02 12:56:12] Here comes the /mnt/hd/opsi/diskinfo.ini (setup.py|1612)
(13347)   [5] [Jul 02 12:56:12] Creating opsi-script-infos.ini (setup.py|1620)
(13348)   [5] [Jul 02 12:56:12] Patching unattend.xml and config.ini (setup.py|1640)
(13361)   [5] [Jul 02 12:56:13] Here comes the unattend.xml  (setup.py|1646)
(13610)   [5] [Jul 02 12:56:13] Reading config.ini data: config_service.url: https://deploy.landeswelle.de:4447  (setup.py|1663)
(13611)   [5] [Jul 02 12:56:13]  config_service.url from clientconfig: https://10.42.20.171:4447/rpc  (setup.py|1664)
(13612)   [4] [Jul 02 12:56:13]  service url from config.ini: https://deploy.landeswelle.de:4447 is different to clientconfig.configserver.url (commandline or input mask): https://10.42.20.171:4447/rpc (setup.py|1666)
(13613)   [5] [Jul 02 12:56:13] Using config.ini data as service url: config_service.url: https://deploy.landeswelle.de:4447  (setup.py|1667)
(13671)   [5] [Jul 02 12:56:13] Current (net) boot entry: Onboard NIC(IPV4) (setup.py|1679)
(13702)   [5] [Jul 02 12:56:13] setting winpe to the top of winpe boot order (setup.py|1687)
(13724)   [5] [Jul 02 12:56:13] Boot entry opsitempwinpe has ID: 0004. (opsisetuplib.py|625)
(13725)   [5] [Jul 02 12:56:13] New bootorder: 0004,0003,0002,0000,0001 . (opsisetuplib.py|654)
(13759)   [5] [Jul 02 12:56:13] Set uefi boot entry 0004 for next boot (opsisetuplib.py|590)
(13771)   [5] [Jul 02 12:56:13] umount /dev/sda4 >> /tmp/gpt.log 2>&1 (setup.py|1712)
(13775)   [5] [Jul 02 12:56:16] diskcounter is still 0 (setup.py|1717)
(13780)   [5] [Jul 02 12:56:16] Script execution successful (master.py|1427)
(14028)   [5] [Jul 02 12:56:16] Writing log to service (master.py|1500)
(14029)   
(14030)   [1] [Jul 02 12:57:50:822] --
(14031)   [1] [Jul 02 12:57:50:822] --
(14032)   [1] [Jul 02 12:57:50:822] x:\\opsi-script-part-Vs74Sa61.log
(14033)   [1] [Jul 02 12:57:50:822] opsi-script 4.12.0.35 started at >>
(14034)   [1] [Jul 02 12:57:50:822] opsi-script log file with encoding utf8
(14035)   [1] [Jul 02 12:57:50:822] startmessage opsi-script created at CentralForm.FormCreate: 7/2/2019 12:57:50
(14036)   [1] [Jul 02 12:57:50:822] Loading skin from: c:\opsi\opsi-script\files64\opsi-winst\winstskin
(14037)   [1] [Jul 02 12:57:50:822] Called with parameter: c:\opsi\setup.opsiscript\r\n/batch\r\n/logfile\r\nx:\opsiscript.log
(14038)   [1] [Jul 02 12:57:50:822] startmessage StartProgramModes and create log: 7/2/2019 12:57:50
(14039)   [1] [Jul 02 12:57:50:822] pm: 6 7/2/2019 12:57:50
(14040)   [1] [Jul 02 12:57:50:822] Prog: force_min_loglevel: 4
(14041)   [1] [Jul 02 12:57:50:822] Prog: default_loglevel: 7
(14042)   [1] [Jul 02 12:57:50:822] Prog: debug_prog: false
(14043)   [1] [Jul 02 12:57:50:822] Prog: debug_lib: true
(14044)   [1] [Jul 02 12:57:50:822] Prog: AktProduktId:  = false
(14045)   [3] [Jul 02 12:57:50:822] readconfig failed: Perhaps got defaults
(14048)   [1] [Jul 02 12:57:50:822] Prog: force_min_loglevel: 4
(14049)   [1] [Jul 02 12:57:50:822] Prog: default_loglevel: 7
(14050)   [1] [Jul 02 12:57:50:822] Prog: debug_prog: False
(14051)   [1] [Jul 02 12:57:50:822] Prog: debug_lib: True
(14052)   [1] [Jul 02 12:57:50:822] Prog: ScriptErrorMessages: False
(14053)   [1] [Jul 02 12:57:50:822] Prog: AutoActivityDisplay: False
(14055)   [1] [Jul 02 12:57:50:885] 
(14056)   [1] [Jul 02 12:57:50:885] ============ Version 4.12.0.35 script "c:\opsi\setup.opsiscript"
(14057)   [1] [Jul 02 12:57:50:885]              used script encoding: cp1252
(14058)   [1] [Jul 02 12:57:50:885]              used system encoding: cp1252
(14059)   [1] [Jul 02 12:57:50:885]              start: 2019-07-02  12:57:50
(14060)   [1] [Jul 02 12:57:50:885]              on client named    "MINWINPC"
(14061)   [1] [Jul 02 12:57:50:885]              loggedin user    ""
(14062)   [1] [Jul 02 12:57:50:885]              opsi-script running as    "MINWINPC$"
(14063)   [4] [Jul 02 12:57:50:885]              opsi-script not running with admin privileges
(14064)   [1] [Jul 02 12:57:50:885]              opsi-script running in standard script mode
(14065)   [1] [Jul 02 12:57:50:885] executing: "c:\opsi\opsi-script\files64\opsi-winst\winst64.exe"
(14066)   [1] [Jul 02 12:57:50:885] system infos:
(14067)   [3] [Jul 02 12:57:50:885] gethostname error 11001
(14068)   [1] [Jul 02 12:57:50:885] 93-F2-4A-D4-CE-A1  -  PC hardware address
(14069)   [1] [Jul 02 12:57:50:885]   -  IP name
(14070)   [1] [Jul 02 12:57:50:885]   -  IP address
(14071)   [1] [Jul 02 12:57:50:885] ENU  -  System default locale
(14077)   [1] [Jul 02 12:57:50:885] MS Windows 10.0 64 Bit, Release: 1903, Edition: Ultimate Edition"
(14078)   [1] [Jul 02 12:57:50:885] 
(14099)   [5] [Jul 02 12:57:50:978] Imported all functions from file: c:\opsi\opsi-script\files64\opsi-winst\lib\uib_bootutils.opsiscript
(14114)   [5] [Jul 02 12:57:50:994] comment: Show product picture
(14122)   [5] [Jul 02 12:57:51:010] message Running win10-x64 ...
(14123)   [5] [Jul 02 12:57:51:010] comment: Here comes the work.log
(14333)   [5] [Jul 02 12:57:51:025] comment: Get PE version ...
(14340)   [5] [Jul 02 12:57:51:025] comment: WinPE version is: 10.0.18362.1
(14341)   [5] [Jul 02 12:57:51:025] message Get Parameter ...
(14383)   [5] [Jul 02 12:57:51:041] message Init network connection ...
(14387)   [5] [Jul 02 12:57:51:041]   message Check volumes...
(14416)   [5] [Jul 02 12:57:52:252]   comment: get lines with ntfs volume ...
(14420)   [5] [Jul 02 12:57:52:252]   ShellCall Executing: "cmd.exe" /C "copy c:\opsi\unattend.xml x:\unattend.xml >nul"
(14425)   [5] [Jul 02 12:57:52:378]   message Initializing PE..... please wait ......
(14427)   [5] [Jul 02 12:57:52:378]   ShellCall Executing: "cmd.exe" /C "wpeinit"
(14436)   [5] [Jul 02 12:58:05:965]     comment: Initializing successful
(14440)   [5] [Jul 02 12:58:05:965]   ShellCall Executing: "cmd.exe" /C "wpeutil InitializeNetwork"
(14453)   [5] [Jul 02 12:58:06:731]     comment: InitializeNetwork successful
(14456)   [5] [Jul 02 12:58:06:731]   ShellCall Executing: "cmd.exe" /C "net use /y /delete *"
(14463)   [5] [Jul 02 12:58:06:841]   ShellCall Executing: "cmd.exe" /C "ping -n 5 127.0.0.1"
(14480)   [5] [Jul 02 12:58:10:977]   ShellCall Executing: "cmd.exe" /C "ipconfig /all"
(14516)   [5] [Jul 02 12:58:11:086]   comment: Try to open new network connection
(14518)   [5] [Jul 02 12:58:11:086]   Execution of: opsiservicecall_authenticated /username $clientId$ /password $hostKey$ /serviceurl $serviceurl$
(14519)   [5] [Jul 02 12:58:11:086]   
(14524)   [3] [Jul 02 12:58:51:300]     Error: retrieveJSONObject --- opsi service problem ----> unexpected Result from webservice in retrieveJSONObject, number of lines: 0-> retrieveJSONObject:1: Stream read error
(14527)   [5] [Jul 02 12:58:51:300]     opsi Server Version :
(14532)   [3] [Jul 02 12:59:31:842]     Error: retrieveJSONObject --- opsi service problem ----> unexpected Result from webservice in retrieveJSONObject, number of lines: 0-> retrieveJSONObject:1: Stream read error
(14533)   [3] [Jul 02 12:59:31:842]     Error: JSON connection not established
(14538)   [5] [Jul 02 12:59:31:842]     comment: scripted login by client id / hostkey failed -> we don't retry
(14539)   [5] [Jul 02 12:59:31:842]     comment: giving up
(14544)   [5] [Jul 02 12:59:31:842]   message Mount share...
(14545)   [5] [Jul 02 12:59:31:874]   Execution of: shellInAnIcon_workcmd winst /showoutput
(14581)   [5] [Jul 02 12:59:36:359] ShellCall Executing: "cmd.exe" /C "ipconfig /all"
(14623)   [5] [Jul 02 12:59:36:499] comment: check for diskcount match
(14624)   [5] [Jul 02 12:59:36:515] comment: Create diskcount.txt ....
(14635)   [5] [Jul 02 12:59:36:546] message Run diskcount ....
(14713)   [5] [Jul 02 12:59:36:867]   message Connect to opsi server ...
(14714)   [5] [Jul 02 12:59:36:882]   comment: Try to open new service connection
(14716)   [5] [Jul 02 12:59:36:898]   Execution of: opsiservicecall_authenticated /username $clientId$ /password $hostKey$ /serviceurl $serviceurl$
(14717)   [5] [Jul 02 12:59:36:898]   
(14718)   [4] [Jul 02 12:59:36:898]     Warning: Existing service connection will be reopend. This may cause critical errors. Do not do this, if you are not really sure what you doing.
(14723)   [3] [Jul 02 13:00:16:899]     Error: retrieveJSONObject --- opsi service problem ----> unexpected Result from webservice in retrieveJSONObject, number of lines: 0-> retrieveJSONObject:1: Stream read error
(14726)   [5] [Jul 02 13:00:16:899]     opsi Server Version :
(14730)   [3] [Jul 02 13:00:56:899]     Error: retrieveJSONObject --- opsi service problem ----> unexpected Result from webservice in retrieveJSONObject, number of lines: 0-> retrieveJSONObject:1: Stream read error
(14731)   [3] [Jul 02 13:00:56:899]     Exception in doOpsiServicecall: tscLogin: List index (0) out of bounds
(14732)   [3] [Jul 02 13:00:56:899]     Error: not connected to service
(14733)   [3] [Jul 02 13:00:56:899]     Error: no connection to service
(14744)   [5] [Jul 02 13:00:56:915]       ShellCall Executing: "cmd.exe" /C "ping -n 5 127.0.0.1"
(14761)   [5] [Jul 02 13:01:01:091]       ShellCall Executing: "cmd.exe" /C "ipconfig /all"
(14798)   [5] [Jul 02 13:01:01:216]       Execution of: opsiservicecall_authenticated /username $clientId$ /password $hostKey$ /serviceurl $serviceurl$
(14799)   [5] [Jul 02 13:01:01:216]       
(14803)   [5] [Jul 02 13:01:01:745]         opsi Server Version : 4.1.1.62
(14809)   [3] [Jul 02 13:01:42:281]         Error: retrieveJSONObject --- opsi service problem ----> unexpected Result from webservice in retrieveJSONObject, number of lines: 0-> retrieveJSONObject:1: Stream read error
(14810)   [3] [Jul 02 13:01:42:281]         Error: JSON connection not established
(14824)   [5] [Jul 02 13:01:42:297]       ShellCall Executing: "cmd.exe" /C "ping -n 5 127.0.0.1"
(14841)   [5] [Jul 02 13:01:46:485]       ShellCall Executing: "cmd.exe" /C "ipconfig /all"
(14878)   [5] [Jul 02 13:01:46:610]       Execution of: opsiservicecall_authenticated /username $clientId$ /password $hostKey$ /serviceurl $serviceurl$
(14879)   [5] [Jul 02 13:01:46:610]       
(14880)   [4] [Jul 02 13:01:46:610]         Warning: Existing service connection will be reopend. This may cause critical errors. Do not do this, if you are not really sure what you doing.
(14885)   [3] [Jul 02 13:02:06:937]         Error: retrieveJSONObject --- opsi service problem ----> unexpected Result from webservice in retrieveJSONObject, number of lines: 0-> retrieveJSONObject:1: Stream read error
(14888)   [5] [Jul 02 13:02:06:937]         opsi Server Version :
(14906)   [5] [Jul 02 13:02:07:753]       ShellCall Executing: "cmd.exe" /C "ping -n 5 127.0.0.1"
(14923)   [5] [Jul 02 13:02:11:902]       ShellCall Executing: "cmd.exe" /C "ipconfig /all"
(14960)   [5] [Jul 02 13:02:12:027]       Execution of: opsiservicecall_authenticated /username $clientId$ /password $hostKey$ /serviceurl $serviceurl$
(14961)   [5] [Jul 02 13:02:12:027]       
(14962)   [4] [Jul 02 13:02:12:027]         Warning: Existing service connection will be reopend. This may cause critical errors. Do not do this, if you are not really sure what you doing.
(14967)   [5] [Jul 02 13:02:32:710]         opsi Server Version : 4.1.1.62
(15135)   [5] [Jul 02 13:02:33:659]     comment: now authenticated
(15146)   [5] [Jul 02 13:02:33:659]   message Prepare setup...
(15157)   [5] [Jul 02 13:02:33:674]     comment: Delete winpe uefi boot entry to help broken bioses
(15161)   [5] [Jul 02 13:02:33:690]     message Find boot entry :opsitempwinpe in UEFI boot manager.
(15322)   [5] [Jul 02 13:02:34:024]         ShellCall Executing: "cmd.exe" /C "bcdedit /delete {0d001fa4-9d0c-11e9-83d5-93f24ad4cea1}"
(15340)   [5] [Jul 02 13:02:34:399] ShellCall Executing: "cmd.exe" /C "copy x:\opsiscript.log c:\"
(15349)   [5] [Jul 02 13:02:34:527]   message Send Log...
(15352)   [5] [Jul 02 13:02:34:846] -------- submitted part of log file ends here, see the rest of log file on client ----------

[wolfbardo]

installing Product: win10-x64_4.1.0.0-15

und

- Fehlermeldung: Die Einstellungen für die unbeaufsichtigte Installation konnten beim Durchgang nicht angewendet werden [specialize]. -> OK

"riecht nach Windows 10 1903 und das benoetigt

Code: Alles auswählen

win10-x64 >= win10-x64_4.1.0.0-16

P.S.:

die Treiber von Dell habe ich aber alle in das boot.wim von Winpe integriert.

wuerde ich nur zur Not machen - nicht immer gilt "viel hilft viel"

Gruss
Bardo Wolf

[lwt]

Vielen Dank für den Hinweis! An der Stelle hätte ich jetzt vermutlich als letztes gesucht.
Nach der Aktualisierung funktioniert die Installation.

Bevor ich angefangen habe hatte ich noch überlegt ob ich nochmal updaten muss: "Aaach den Server habe ich erst vor einem Monat installiert, was soll sich da schon getan haben"