Bootimage hängt: HP EliteDesk 705 G4

l.gremme
Beiträge: 51
Registriert: 27 Okt 2016, 09:08

Bootimage hängt: HP EliteDesk 705 G4

Beitragvon l.gremme » 21 Mär 2019, 09:40

Guten Morgen,

ich habe ein Problem mit dem Bootimage im UEFI-Modus.
Das Bild/Image bleibt nach dem Start der Soundkarte stehen.
Produktnummer HP: 4HN12EA#ABD

Die Ausgabe des Codes für lspci -vvv und lsmod wurde mit Ubuntu 18.04.2 (Desktop) erstellt.

Code: Alles auswählen

lspci -vvv
00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 15d0
   Subsystem: Advanced Micro Devices, Inc. [AMD] Device 15d0
   Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:00.2 IOMMU: Advanced Micro Devices, Inc. [AMD] Device 15d1
   Subsystem: Advanced Micro Devices, Inc. [AMD] Device 15d1
   Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Interrupt: pin A routed to IRQ 27
   Capabilities: <access denied>

00:01.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) PCIe Dummy Host Bridge
   Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:01.2 PCI bridge: Advanced Micro Devices, Inc. [AMD] Device 15d3 (prog-if 00 [Normal decode])
   Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0
   Interrupt: pin ? routed to IRQ 28
   Bus: primary=00, secondary=01, subordinate=08, sec-latency=0
   I/O behind bridge: 00003000-00003fff
   Memory behind bridge: d0800000-d09fffff
   Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
   Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
   BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
      PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
   Capabilities: <access denied>
   Kernel driver in use: pcieport

00:01.6 PCI bridge: Advanced Micro Devices, Inc. [AMD] Device 15d3 (prog-if 00 [Normal decode])
   Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0
   Interrupt: pin ? routed to IRQ 29
   Bus: primary=00, secondary=09, subordinate=09, sec-latency=0
   I/O behind bridge: 0000f000-00000fff
   Memory behind bridge: d0700000-d07fffff
   Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
   Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
   BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
      PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
   Capabilities: <access denied>
   Kernel driver in use: pcieport

00:08.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) PCIe Dummy Host Bridge
   Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:08.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Device 15db (prog-if 00 [Normal decode])
   Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0
   Interrupt: pin A routed to IRQ 30
   Bus: primary=00, secondary=0a, subordinate=0a, sec-latency=0
   I/O behind bridge: 00002000-00002fff
   Memory behind bridge: d0300000-d06fffff
   Prefetchable memory behind bridge: 00000000c0000000-00000000d01fffff
   Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
   BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
      PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
   Capabilities: <access denied>
   Kernel driver in use: pcieport

00:08.2 PCI bridge: Advanced Micro Devices, Inc. [AMD] Device 15dc (prog-if 00 [Normal decode])
   Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0
   Interrupt: pin A routed to IRQ 31
   Bus: primary=00, secondary=0b, subordinate=0b, sec-latency=0
   I/O behind bridge: 0000f000-00000fff
   Memory behind bridge: d0200000-d02fffff
   Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
   Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
   BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
      PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
   Capabilities: <access denied>
   Kernel driver in use: pcieport

00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller (rev 61)
   Subsystem: Hewlett-Packard Company FCH SMBus Controller
   Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
   Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Kernel driver in use: piix4_smbus
   Kernel modules: i2c_piix4, sp5100_tco

00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge (rev 51)
   Subsystem: Hewlett-Packard Company FCH LPC Bridge
   Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
   Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0

00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 15e8
   Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 15e9
   Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 15ea
   Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 15eb
   Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Kernel driver in use: k10temp
   Kernel modules: k10temp

00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 15ec
   Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 15ed
   Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.6 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 15ee
   Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.7 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 15ef
   Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

01:00.0 USB controller: Advanced Micro Devices, Inc. [AMD] 300 Series Chipset USB 3.1 xHCI Controller (rev 02) (prog-if 30 [XHCI])
   Subsystem: Hewlett-Packard Company 300 Series Chipset USB 3.1 xHCI Controller
   Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0, Cache Line Size: 64 bytes
   Interrupt: pin A routed to IRQ 41
   Region 0: Memory at d0920000 (64-bit, non-prefetchable) [size=32K]
   Capabilities: <access denied>
   Kernel driver in use: xhci_hcd

01:00.1 SATA controller: Advanced Micro Devices, Inc. [AMD] 300 Series Chipset SATA Controller (rev 02) (prog-if 01 [AHCI 1.0])
   Subsystem: Hewlett-Packard Company 300 Series Chipset SATA Controller
   Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0, Cache Line Size: 64 bytes
   Interrupt: pin B routed to IRQ 60
   Region 5: Memory at d0900000 (32-bit, non-prefetchable) [size=128K]
   Expansion ROM at d0980000 [disabled] [size=512K]
   Capabilities: <access denied>
   Kernel driver in use: ahci
   Kernel modules: ahci

01:00.2 PCI bridge: Advanced Micro Devices, Inc. [AMD] Device 43b2 (rev 02) (prog-if 00 [Normal decode])
   Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0
   Interrupt: pin C routed to IRQ 32
   Bus: primary=01, secondary=02, subordinate=08, sec-latency=0
   I/O behind bridge: 00003000-00003fff
   Memory behind bridge: d0800000-d08fffff
   Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
   Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
   BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
      PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
   Capabilities: <access denied>
   Kernel driver in use: pcieport

02:00.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] 300 Series Chipset PCIe Port (rev 02) (prog-if 00 [Normal decode])
   Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0
   Interrupt: pin A routed to IRQ 33
   Bus: primary=02, secondary=03, subordinate=03, sec-latency=0
   I/O behind bridge: 0000f000-00000fff
   Memory behind bridge: fff00000-000fffff
   Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
   Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
   BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
      PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
   Capabilities: <access denied>
   Kernel driver in use: pcieport

02:01.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] 300 Series Chipset PCIe Port (rev 02) (prog-if 00 [Normal decode])
   Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0
   Interrupt: pin A routed to IRQ 35
   Bus: primary=02, secondary=04, subordinate=04, sec-latency=0
   I/O behind bridge: 0000f000-00000fff
   Memory behind bridge: fff00000-000fffff
   Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
   Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
   BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
      PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
   Capabilities: <access denied>
   Kernel driver in use: pcieport

02:04.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] 300 Series Chipset PCIe Port (rev 02) (prog-if 00 [Normal decode])
   Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0
   Interrupt: pin A routed to IRQ 36
   Bus: primary=02, secondary=05, subordinate=05, sec-latency=0
   I/O behind bridge: 00003000-00003fff
   Memory behind bridge: d0800000-d08fffff
   Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
   Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
   BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
      PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
   Capabilities: <access denied>
   Kernel driver in use: pcieport

02:05.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] 300 Series Chipset PCIe Port (rev 02) (prog-if 00 [Normal decode])
   Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0
   Interrupt: pin A routed to IRQ 37
   Bus: primary=02, secondary=06, subordinate=06, sec-latency=0
   I/O behind bridge: 0000f000-00000fff
   Memory behind bridge: fff00000-000fffff
   Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
   Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
   BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
      PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
   Capabilities: <access denied>
   Kernel driver in use: pcieport

02:06.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] 300 Series Chipset PCIe Port (rev 02) (prog-if 00 [Normal decode])
   Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0
   Interrupt: pin A routed to IRQ 38
   Bus: primary=02, secondary=07, subordinate=07, sec-latency=0
   I/O behind bridge: 0000f000-00000fff
   Memory behind bridge: fff00000-000fffff
   Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
   Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
   BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
      PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
   Capabilities: <access denied>
   Kernel driver in use: pcieport

02:07.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] 300 Series Chipset PCIe Port (rev 02) (prog-if 00 [Normal decode])
   Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0
   Interrupt: pin A routed to IRQ 40
   Bus: primary=02, secondary=08, subordinate=08, sec-latency=0
   I/O behind bridge: 0000f000-00000fff
   Memory behind bridge: fff00000-000fffff
   Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
   Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
   BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
      PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
   Capabilities: <access denied>
   Kernel driver in use: pcieport

05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 0e)
   Subsystem: Hewlett-Packard Company RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
   Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0, Cache Line Size: 64 bytes
   Interrupt: pin A routed to IRQ 25
   Region 0: I/O ports at 3300 [size=256]
   Region 2: Memory at d0814000 (64-bit, non-prefetchable) [size=4K]
   Region 4: Memory at d0800000 (64-bit, non-prefetchable) [size=16K]
   Capabilities: <access denied>
   Kernel driver in use: r8169
   Kernel modules: r8169

05:00.1 Serial controller: Realtek Semiconductor Co., Ltd. Device 816a (rev 0e) (prog-if 02 [16550])
   Subsystem: Hewlett-Packard Company Device 8461
   Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Interrupt: pin B routed to IRQ 34
   Region 0: I/O ports at 3200 [size=256]
   Region 2: Memory at d0815000 (64-bit, non-prefetchable) [size=4K]
   Region 4: Memory at d0804000 (64-bit, non-prefetchable) [size=16K]
   Capabilities: <access denied>

05:00.2 Serial controller: Realtek Semiconductor Co., Ltd. Device 816b (rev 0e) (prog-if 02 [16550])
   Subsystem: Hewlett-Packard Company Device 8461
   Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Interrupt: pin C routed to IRQ 24
   Region 0: I/O ports at 3100 [size=256]
   Region 2: Memory at d0816000 (64-bit, non-prefetchable) [size=4K]
   Region 4: Memory at d0808000 (64-bit, non-prefetchable) [size=16K]
   Capabilities: <access denied>

05:00.3 IPMI SMIC interface: Realtek Semiconductor Co., Ltd. Device 816c (rev 0e) (prog-if 01)
   Subsystem: Hewlett-Packard Company Device 8461
   Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Interrupt: pin D routed to IRQ 255
   Region 0: I/O ports at 3000 [disabled] [size=256]
   Region 2: Memory at d0817000 (64-bit, non-prefetchable) [disabled] [size=4K]
   Region 4: Memory at d080c000 (64-bit, non-prefetchable) [disabled] [size=16K]
   Capabilities: <access denied>
   Kernel modules: ipmi_si

05:00.4 USB controller: Realtek Semiconductor Co., Ltd. Device 816d (rev 0e) (prog-if 20 [EHCI])
   Subsystem: Hewlett-Packard Company Device 8461
   Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0, Cache Line Size: 64 bytes
   Interrupt: pin D routed to IRQ 39
   Region 0: Memory at d0818000 (32-bit, non-prefetchable) [size=4K]
   Region 2: Memory at d0810000 (64-bit, non-prefetchable) [size=16K]
   Capabilities: <access denied>
   Kernel driver in use: ehci-pci

09:00.0 Non-Volatile memory controller: Device 1c5c:1327 (prog-if 02 [NVM Express])
   Subsystem: Device 1c5c:0000
   Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0
   Interrupt: pin A routed to IRQ 61
   NUMA node: 0
   Region 0: Memory at d0700000 (64-bit, non-prefetchable) [size=16K]
   Capabilities: <access denied>
   Kernel driver in use: nvme
   Kernel modules: nvme

0a:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Vega [Radeon Vega 8 Mobile] (rev d3) (prog-if 00 [VGA controller])
   Subsystem: Hewlett-Packard Company Vega [Radeon Vega 8 Mobile]
   Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0
   Interrupt: pin A routed to IRQ 67
   Region 0: Memory at c0000000 (64-bit, prefetchable) [size=256M]
   Region 2: Memory at d0000000 (64-bit, prefetchable) [size=2M]
   Region 4: I/O ports at 2000 [size=256]
   Region 5: Memory at d0600000 (32-bit, non-prefetchable) [size=512K]
   Capabilities: <access denied>
   Kernel driver in use: amdgpu
   Kernel modules: amdgpu

0a:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Device 15de
   Subsystem: Hewlett-Packard Company Device 83e7
   Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0
   Interrupt: pin B routed to IRQ 85
   Region 0: Memory at d0688000 (32-bit, non-prefetchable) [size=16K]
   Capabilities: <access denied>
   Kernel driver in use: snd_hda_intel
   Kernel modules: snd_hda_intel

0a:00.2 Encryption controller: Advanced Micro Devices, Inc. [AMD] Device 15df
   Subsystem: Hewlett-Packard Company Device 83e7
   Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Interrupt: pin C routed to IRQ 255
   Region 2: Memory at d0500000 (32-bit, non-prefetchable) [disabled] [size=1M]
   Region 5: Memory at d068c000 (32-bit, non-prefetchable) [disabled] [size=8K]
   Capabilities: <access denied>

0a:00.3 USB controller: Advanced Micro Devices, Inc. [AMD] Device 15e0 (prog-if 30 [XHCI])
   Subsystem: Hewlett-Packard Company Device 83e7
   Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0, Cache Line Size: 64 bytes
   Interrupt: pin D routed to IRQ 42
   Region 0: Memory at d0300000 (64-bit, non-prefetchable) [size=1M]
   Capabilities: <access denied>
   Kernel driver in use: xhci_hcd

0a:00.4 USB controller: Advanced Micro Devices, Inc. [AMD] Device 15e1 (prog-if 30 [XHCI])
   Subsystem: Hewlett-Packard Company Device 83e7
   Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0, Cache Line Size: 64 bytes
   Interrupt: pin A routed to IRQ 51
   Region 0: Memory at d0400000 (64-bit, non-prefetchable) [size=1M]
   Capabilities: <access denied>
   Kernel driver in use: xhci_hcd

0a:00.6 Audio device: Advanced Micro Devices, Inc. [AMD] Device 15e3
   Subsystem: Hewlett-Packard Company Device 83e7
   Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0
   Interrupt: pin C routed to IRQ 86
   Region 0: Memory at d0680000 (32-bit, non-prefetchable) [size=32K]
   Capabilities: <access denied>
   Kernel driver in use: snd_hda_intel
   Kernel modules: snd_hda_intel

0b:00.0 SATA controller: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode] (rev 61) (prog-if 01 [AHCI 1.0])
   Subsystem: Hewlett-Packard Company FCH SATA Controller [AHCI mode]
   Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0, Cache Line Size: 64 bytes
   Interrupt: pin A routed to IRQ 64
   Region 5: Memory at d0200000 (32-bit, non-prefetchable) [size=2K]
   Capabilities: <access denied>
   Kernel driver in use: ahci
   Kernel modules: ahci


Code: Alles auswählen

lsmod
Module                  Size  Used by
edac_mce_amd           28672  0
kvm_amd                94208  0
ccp                    86016  1 kvm_amd
snd_hda_codec_conexant    24576  1
kvm                   626688  1 kvm_amd
snd_hda_codec_generic    73728  1 snd_hda_codec_conexant
snd_hda_codec_hdmi     49152  1
snd_hda_intel          40960  4
snd_hda_codec         126976  4 snd_hda_codec_generic,snd_hda_codec_conexant,snd_hda_codec_hdmi,snd_hda_intel
irqbypass              16384  1 kvm
crct10dif_pclmul       16384  0
crc32_pclmul           16384  0
snd_hda_core           81920  5 snd_hda_codec_generic,snd_hda_codec_conexant,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec
ghash_clmulni_intel    16384  0
snd_hwdep              20480  1 snd_hda_codec
snd_pcm                98304  4 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec,snd_hda_core
pcbc                   16384  0
snd_seq_midi           16384  0
aesni_intel           200704  0
snd_seq_midi_event     16384  1 snd_seq_midi
snd_rawmidi            32768  1 snd_seq_midi
aes_x86_64             20480  1 aesni_intel
snd_seq                65536  2 snd_seq_midi,snd_seq_midi_event
crypto_simd            16384  1 aesni_intel
cryptd                 24576  3 crypto_simd,ghash_clmulni_intel,aesni_intel
k10temp                16384  0
input_leds             16384  0
snd_seq_device         16384  3 snd_seq,snd_seq_midi,snd_rawmidi
glue_helper            16384  1 aesni_intel
hp_wmi                 16384  0
snd_timer              32768  2 snd_seq,snd_pcm
serio_raw              16384  0
sparse_keymap          16384  1 hp_wmi
wmi_bmof               16384  0
snd                    81920  19 snd_hda_codec_generic,snd_seq,snd_hda_codec_conexant,snd_seq_device,snd_hda_codec_hdmi,snd_hwdep,snd_hda_intel,snd_hda_codec,snd_timer,snd_pcm,snd_rawmidi
ipmi_devintf           20480  0
ipmi_msghandler       102400  1 ipmi_devintf
soundcore              16384  1 snd
ucsi_acpi              16384  0
typec_ucsi             32768  1 ucsi_acpi
typec                  32768  1 typec_ucsi
mac_hid                16384  0
sch_fq_codel           20480  2
parport_pc             36864  0
ppdev                  20480  0
lp                     20480  0
parport                49152  3 parport_pc,lp,ppdev
ip_tables              28672  0
x_tables               40960  1 ip_tables
autofs4                40960  2
overlay                94208  1
nls_iso8859_1          16384  1
dm_mirror              24576  0
dm_region_hash         20480  1 dm_mirror
dm_log                 20480  2 dm_region_hash,dm_mirror
hid_generic            16384  0
usbhid                 49152  0
uas                    24576  0
hid                   122880  2 usbhid,hid_generic
usb_storage            69632  2 uas
amdkfd                241664  1
amd_iommu_v2           20480  1 amdkfd
amdgpu               2924544  10
chash                  16384  1 amdgpu
gpu_sched              24576  1 amdgpu
i2c_algo_bit           16384  1 amdgpu
ttm                   110592  1 amdgpu
drm_kms_helper        172032  1 amdgpu
syscopyarea            16384  1 drm_kms_helper
sysfillrect            16384  1 drm_kms_helper
sysimgblt              16384  1 drm_kms_helper
fb_sys_fops            16384  1 drm_kms_helper
psmouse               151552  0
drm                   458752  7 gpu_sched,drm_kms_helper,amdgpu,ttm
nvme                   36864  0
i2c_piix4              24576  0
nvme_core              77824  1 nvme
ahci                   40960  0
r8169                  86016  0
mii                    16384  1 r8169
libahci                32768  1 ahci
wmi                    24576  2 hp_wmi,wmi_bmof
gpio_amdpt             16384  0
video                  45056  0
gpio_generic           20480  1 gpio_amdpt


Die derzeit installierten Pakete bei OPSI:
ii opsi-configed 4.0.7.6.34-2 all OPSI config editor
ii opsi-linux-bootimage 20181213-1 all opsi bootimage for netboot tasks.
ii opsi-server 4.1.1.6-1 all opsi server configuration package
ii opsi-tftpd-hpa 5.2.8-49 amd64 HPA's tftp server
ii opsi-utils 4.1.1.27-1 all utilites for working with opsi.
ii opsi-windows-support 4.1.1-5 all Install utilities useful for deploying Windows with opsi.
ii opsiconfd 4.1.1.16-2 all opsi configuration service
ii opsipxeconfd 4.1.1.14-1 all opsi pxe configuration daemon
ii python-opsi 4.1.1.58-1 all opsi python library

Das Fehlerbild tritt nicht bei der HP Serie derzeit auf.
Bild

VG Lars

Benutzeravatar
m.radtke
uib-Team
Beiträge: 770
Registriert: 10 Jun 2015, 12:19

Re: Bootimage hängt: HP EliteDesk 705 G4

Beitragvon m.radtke » 22 Mär 2019, 10:14

Moin Lars,

füge mal im configed in die Bootimage Append parameter folgendes ein

Code: Alles auswählen

mem=2048M

und probiere es dann erneut.

Gruß
Mathias
Kein Support per DM!
_________________________
opsi support - http://www.uib.de/
For productive opsi installations we recommend support contracts.

l.gremme
Beiträge: 51
Registriert: 27 Okt 2016, 09:08

Re: Bootimage hängt: HP EliteDesk 705 G4

Beitragvon l.gremme » 22 Mär 2019, 16:14

Hallo Mathias,

Ich habe heute morgen das Bootimage aus dem Testing aktualsiert. Auch deine Einstellung führte zu keinem besseren Ergebnis.
Bild

Auszug der Hardware:
AMD Ryzen™ 5 2400G Quad-Core mit Radeon™ RX Vega 11-Grafikkarte (3,6 GHz Basisfrequenz, bis zu 3,9 GHz Burst-Frequenz, 6 MB Cache)

Der Rechner hängt sich an dieser Stelle endgültig auf oder es fehlen dem Bootimage ein paar Treiber. Ich habe dir oben mal die verschiedenen Auszüge hinterlegt. Ich vermute das es die RX Vega 11-Grafikkarte ist.

VG Lars

Benutzeravatar
m.radtke
uib-Team
Beiträge: 770
Registriert: 10 Jun 2015, 12:19

Re: Bootimage hängt: HP EliteDesk 705 G4

Beitragvon m.radtke » 22 Mär 2019, 21:18

Hi Lars

danke für das Feedback. Ich schaue kommende Woche bei Gelegenheit mal rein, wenn ich sowieso am Bootimage arbeite.

Gruß
Mathias
Kein Support per DM!
_________________________
opsi support - http://www.uib.de/
For productive opsi installations we recommend support contracts.

l.gremme
Beiträge: 51
Registriert: 27 Okt 2016, 09:08

Re: Bootimage hängt: HP EliteDesk 705 G4

Beitragvon l.gremme » 26 Mär 2019, 20:21

Hallo Mathias,

ich habe es heute erneut geprüft, es fehlt lediglich der Grafikkartentreiber. Über den OPSI-Configed kann der Rechner angesteuert werden und die Installation funktioniert.

VG Lars

Benutzeravatar
m.radtke
uib-Team
Beiträge: 770
Registriert: 10 Jun 2015, 12:19

Re: Bootimage hängt: HP EliteDesk 705 G4

Beitragvon m.radtke » 26 Mär 2019, 20:43

Hi Lars,

also das Bild der Maschine hängt aber im.hintergrund läuft die Installation weiter und startet irgendwann in ein laufendes system?

Gruß
Mathias
Kein Support per DM!
_________________________
opsi support - http://www.uib.de/
For productive opsi installations we recommend support contracts.

l.gremme
Beiträge: 51
Registriert: 27 Okt 2016, 09:08

Re: Bootimage hängt: HP EliteDesk 705 G4

Beitragvon l.gremme » 26 Mär 2019, 21:21

Hi Mathias,

m.radtke hat geschrieben:also das Bild der Maschine hängt aber im.hintergrund läuft die Installation weiter und startet irgendwann in ein laufendes system?

genau das passiert. Habe ich auch erst heute herausgefunden, da es normalerweise ein Standardvorgehen von euch ist. Normalerweise booten wir direkt im UEFI (mit bearbeiteter elilo.conf) auf die Textconsole des Bootimages.

VG Lars

Benutzeravatar
m.radtke
uib-Team
Beiträge: 770
Registriert: 10 Jun 2015, 12:19

Re: Bootimage hängt: HP EliteDesk 705 G4

Beitragvon m.radtke » 26 Mär 2019, 21:31

Danke fürs Feedback Lars.

Das grenzt die Umbauarbeiten enorm ein.

Gruß
Mathias
Kein Support per DM!
_________________________
opsi support - http://www.uib.de/
For productive opsi installations we recommend support contracts.