data_partition_preserve schlägt fehl

[admin_ahn]

Hallo,

bei der Neuinstallation unserer Rechner würden wir gerne die Datenpartition behalten.

Die Option data_partition_preserve steht auf always.
Die Rechner sind mit UEFI und Windows 10 installiert.
Win10-x64 Version 4.1.0.1-14

Es kommt bei allen Rechner die Meldung:

Code: Alles auswählen

Could not use the existing partition table on /dev/sda - but not allowed to delete it - stopping here

Ist dieses Problem bekannt und wer weiß rat?

Vielen Dank schon einmal in voraus.

Gruß
Dirk

[m.radtke]

Hi

mit nur der Fehlermeldung kommen wir hier nicht weiter. Bitte stelle uns das ganze Log zur Verfügung

Es gibt einige Faktoren die die Variablenkombinartion die zur Meldung führen beeinflussen und die Glaskugel ist noch nicht aus der Werkstatt zurück gekommen.

Gruß
Mathias

[admin_ahn]

Hi,

danke für die schnelle Rückmeldung. Stimmt die Informationen sind etwas dürftig.

Hier erst einmal die verwendeten Versionen:

Code: Alles auswählen

opsi-utils-4.1.1.36-1.1.noarch
opsipxeconfd-4.1.1.20-3.1.noarch
opsi-configed-4.0.7.6.34-2.7.noarch
opsi-tftp-hpa-server-5.2.8-52.1.x86_64
opsi-server-4.1.1.8-1.3.noarch
opsiconfd-4.1.1.20-1.4.noarch
opsi-linux-bootimage-20200506-1.1.noarch
python-opsi-4.1.1.95-1.1.noarch

Und das bootimage Log in Auszügen.
Ich hoffe die relevanten Teile sind drin.

Code: Alles auswählen

...
(4768)    [7] [Sep 30 08:41:18] >>>    Device Boot    Start       End   #sectors  Id  System (Posix.py|1003)
(4769)    [7] [Sep 30 08:41:18] >>> /dev/sda1             1 500118191  500118191  ee  GPT (Posix.py|1003)
(4770)    [7] [Sep 30 08:41:18] >>> /dev/sda2             0         -          0   0  Empty (Posix.py|1003)
(4771)    [7] [Sep 30 08:41:18] >>> /dev/sda3             0         -          0   0  Empty (Posix.py|1003)
(4772)    [7] [Sep 30 08:41:18] >>> /dev/sda4             0         -          0   0  Empty (Posix.py|1003)
(4773)    [7] [Sep 30 08:41:18] >>> sfdisk: Warning: The partition table looks like it was made (Posix.py|1003)
(4774)    [7] [Sep 30 08:41:18] >>>   for C/H/S=*/256/63 (instead of 31130/255/63). (Posix.py|1003)
(4775)    [7] [Sep 30 08:41:18] >>> For this listing I'll assume that geometry. (Posix.py|1003)
(4776)    [7] [Sep 30 08:41:18] Exit code: 0 (Posix.py|1010)
(4777)    [6] [Sep 30 08:41:18] Executing: /sbin/sfdisk --version (Posix.py|926)
(4778)    [6] [Sep 30 08:41:18] Using encoding 'ANSI_X3.4-1968' (Posix.py|959)
(4779)    [7] [Sep 30 08:41:18] >>> sfdisk from util-linux 2.25.2 (Posix.py|1003)
(4780)    [7] [Sep 30 08:41:18] Exit code: 0 (Posix.py|1010)
(4781)    [6] [Sep 30 08:41:18] Total sectors of disk '/dev/sda': 500118192, 512 bytes per cylinder (Posix.py|1810)
(4782)    [6] [Sep 30 08:41:18] Executing: /sbin/sfdisk --version (Posix.py|926)
(4783)    [6] [Sep 30 08:41:18] Using encoding 'ANSI_X3.4-1968' (Posix.py|959)
(4784)    [7] [Sep 30 08:41:18] >>> sfdisk from util-linux 2.25.2 (Posix.py|1003)
(4785)    [7] [Sep 30 08:41:18] Exit code: 0 (Posix.py|1010)
(4786)    [7] [Sep 30 08:41:18] Partition sector values =>>> number: 1, start: 1 sec, end: 500118191 sec, size: 500118191 sec  (Posix.py|1795)
(4787)    [6] [Sep 30 08:41:18] Executing: /sbin/sfdisk --version (Posix.py|926)
(4788)    [6] [Sep 30 08:41:18] Using encoding 'ANSI_X3.4-1968' (Posix.py|959)
(4789)    [7] [Sep 30 08:41:18] >>> sfdisk from util-linux 2.25.2 (Posix.py|1003)
(4790)    [7] [Sep 30 08:41:18] Exit code: 0 (Posix.py|1010)
(4791)    [6] [Sep 30 08:41:18] Executing: /sbin/sfdisk --version (Posix.py|926)
(4792)    [6] [Sep 30 08:41:18] Using encoding 'ANSI_X3.4-1968' (Posix.py|959)
(4793)    [7] [Sep 30 08:41:18] >>> sfdisk from util-linux 2.25.2 (Posix.py|1003)
(4794)    [7] [Sep 30 08:41:18] Exit code: 0 (Posix.py|1010)
(4795)    [6] [Sep 30 08:41:18] Executing: /sbin/sfdisk --version (Posix.py|926)
(4796)    [6] [Sep 30 08:41:18] Using encoding 'ANSI_X3.4-1968' (Posix.py|959)
(4797)    [7] [Sep 30 08:41:18] >>> sfdisk from util-linux 2.25.2 (Posix.py|1003)
(4798)    [7] [Sep 30 08:41:18] Exit code: 0 (Posix.py|1010)
(4799)    [6] [Sep 30 08:41:18] Executing: cat /sys/block/sda/queue/rotational (Posix.py|926)
(4800)    [6] [Sep 30 08:41:18] Using encoding 'ANSI_X3.4-1968' (Posix.py|959)
(4801)    [7] [Sep 30 08:41:18] >>> 0 (Posix.py|1003)
(4802)    [7] [Sep 30 08:41:18] Exit code: 0 (Posix.py|1010)
(4803)    [5] [Sep 30 08:41:18] Disk order: (opsisetuplib.py|78)
(4804)    [5] [Sep 30 08:41:18]  - /dev/sda (rotational? False) (sizeG 238) (uuid 70a1beb7-4909-452f-bf44-2bba8a5295ed) (opsisetuplib.py|80)
(4805)    [5] [Sep 30 08:41:18] Normally we using disk 0 (setup.py|579)
(4806)    [6] [Sep 30 08:41:18] Executing: /sbin/sfdisk --version (Posix.py|926)
(4807)    [6] [Sep 30 08:41:18] Using encoding 'ANSI_X3.4-1968' (Posix.py|959)
(4808)    [7] [Sep 30 08:41:18] >>> sfdisk from util-linux 2.25.2 (Posix.py|1003)
(4809)    [7] [Sep 30 08:41:18] Exit code: 0 (Posix.py|1010)
(4810)    [6] [Sep 30 08:41:18] Executing: /sbin/sfdisk -L --no-reread -s -uB (Posix.py|926)
(4811)    [6] [Sep 30 08:41:18] Using encoding 'ANSI_X3.4-1968' (Posix.py|959)
(4812)    [7] [Sep 30 08:41:18] >>> /dev/sda: 250059096 (Posix.py|1003)
(4813)    [7] [Sep 30 08:41:18] >>> total: 250059096 blocks (Posix.py|1003)
(4814)    [7] [Sep 30 08:41:18] Exit code: 0 (Posix.py|1010)
(4815)    [7] [Sep 30 08:41:18] Found disk =>>> dev: '/dev/sda', size: 238.00 GB (Posix.py|1105)
(4816)    [6] [Sep 30 08:41:18] Executing: /sbin/modprobe edd (Posix.py|926)
(4817)    [6] [Sep 30 08:41:18] Using encoding 'ANSI_X3.4-1968' (Posix.py|959)
(4818)    [7] [Sep 30 08:41:18] >>> modprobe: ERROR: could not insert 'edd': No such device (Posix.py|1003)
(4819)    [7] [Sep 30 08:41:18] Exit code: 1 (Posix.py|1010)
(4820)    [3] [Sep 30 08:41:18] Command '/sbin/modprobe edd' failed (1):
(4821)    modprobe: ERROR: could not insert 'edd': No such device (Posix.py|1449)
(4822)    [6] [Sep 30 08:41:18] Executing: /sbin/sfdisk --version (Posix.py|926)
(4823)    [6] [Sep 30 08:41:18] Using encoding 'ANSI_X3.4-1968' (Posix.py|959)
(4824)    [7] [Sep 30 08:41:18] >>> sfdisk from util-linux 2.25.2 (Posix.py|1003)
(4825)    [7] [Sep 30 08:41:18] Exit code: 0 (Posix.py|1010)
(4826)    [6] [Sep 30 08:41:18] Executing: /sbin/sfdisk -L --no-reread -s -uB /dev/sda (Posix.py|926)
(4827)    [6] [Sep 30 08:41:18] Using encoding 'ANSI_X3.4-1968' (Posix.py|959)
(4828)    [7] [Sep 30 08:41:18] >>> 250059096 (Posix.py|1003)
(4829)    [7] [Sep 30 08:41:18] Exit code: 0 (Posix.py|1010)
(4830)    [6] [Sep 30 08:41:18] Size of disk '/dev/sda': 256060514304 Byte / 244198 MB (Posix.py|1594)
(4831)    [6] [Sep 30 08:41:18] Executing: /sbin/sfdisk --version (Posix.py|926)
(4832)    [6] [Sep 30 08:41:18] Using encoding 'ANSI_X3.4-1968' (Posix.py|959)
(4833)    [7] [Sep 30 08:41:18] >>> sfdisk from util-linux 2.25.2 (Posix.py|1003)
(4834)    [7] [Sep 30 08:41:18] Exit code: 0 (Posix.py|1010)
(4835)    [6] [Sep 30 08:41:18] Executing: /sbin/sfdisk -L --no-reread -l /dev/sda (Posix.py|926)
(4836)    [6] [Sep 30 08:41:18] Using encoding 'ANSI_X3.4-1968' (Posix.py|959)
(4837)    [7] [Sep 30 08:41:18] >>>  (Posix.py|1003)
(4838)    [7] [Sep 30 08:41:18] >>> Disk /dev/sda: 31130 cylinders, 255 heads, 63 sectors/track (Posix.py|1003)
(4839)    [7] [Sep 30 08:41:18] >>> Units: cylinders of 8257536 bytes, blocks of 1024 bytes, counting from 0 (Posix.py|1003)
(4840)    [7] [Sep 30 08:41:18] >>>  (Posix.py|1003)
(4841)    [7] [Sep 30 08:41:18] >>>    Device Boot Start     End   #cyls    #blocks   Id  System (Posix.py|1003)
(4842)    [7] [Sep 30 08:41:18] >>> /dev/sda1          0+  31009-  31010- 250059095+  ee  GPT (Posix.py|1003)
(4843)    [7] [Sep 30 08:41:18] >>> /dev/sda2          0       -       0          0    0  Empty (Posix.py|1003)
(4844)    [7] [Sep 30 08:41:18] >>> /dev/sda3          0       -       0          0    0  Empty (Posix.py|1003)
(4845)    [7] [Sep 30 08:41:18] >>> /dev/sda4          0       -       0          0    0  Empty (Posix.py|1003)
(4846)    [7] [Sep 30 08:41:18] >>> sfdisk: Warning: The partition table looks like it was made (Posix.py|1003)
(4847)    [7] [Sep 30 08:41:18] >>>   for C/H/S=*/256/63 (instead of 31130/255/63). (Posix.py|1003)
(4848)    [7] [Sep 30 08:41:18] >>> For this listing I'll assume that geometry. (Posix.py|1003)
(4849)    [7] [Sep 30 08:41:18] Exit code: 0 (Posix.py|1010)
(4850)    [6] [Sep 30 08:41:18] Executing: /sbin/sfdisk --version (Posix.py|926)
(4851)    [6] [Sep 30 08:41:18] Using encoding 'ANSI_X3.4-1968' (Posix.py|959)
(4852)    [7] [Sep 30 08:41:18] >>> sfdisk from util-linux 2.25.2 (Posix.py|1003)
(4853)    [7] [Sep 30 08:41:18] Exit code: 0 (Posix.py|1010)
(4854)    [6] [Sep 30 08:41:18] Executing: /sbin/sfdisk --version (Posix.py|926)
(4855)    [6] [Sep 30 08:41:18] Using encoding 'ANSI_X3.4-1968' (Posix.py|959)
(4856)    [7] [Sep 30 08:41:18] >>> sfdisk from util-linux 2.25.2 (Posix.py|1003)
(4857)    [7] [Sep 30 08:41:18] Exit code: 0 (Posix.py|1010)
(4858)    [6] [Sep 30 08:41:18] Total cylinders of disk '/dev/sda': 31009, 8257536 bytes per cylinder (Posix.py|1676)
(4859)    [6] [Sep 30 08:41:18] Executing: /sbin/sfdisk --version (Posix.py|926)
(4860)    [6] [Sep 30 08:41:18] Using encoding 'ANSI_X3.4-1968' (Posix.py|959)
(4861)    [7] [Sep 30 08:41:19] >>> sfdisk from util-linux 2.25.2 (Posix.py|1003)
(4862)    [7] [Sep 30 08:41:19] Exit code: 0 (Posix.py|1010)
(4863)    [7] [Sep 30 08:41:19] Trying using Blkid (Posix.py|1704)
(4864)    [6] [Sep 30 08:41:19] Executing: /sbin/blkid -o value -s TYPE /dev/sda1 (Posix.py|926)
(4865)    [6] [Sep 30 08:41:19] Using encoding 'ANSI_X3.4-1968' (Posix.py|959)
(4866)    [7] [Sep 30 08:41:19] >>> vfat (Posix.py|1003)
(4867)    [7] [Sep 30 08:41:19] Exit code: 0 (Posix.py|1010)
(4868)    [7] [Sep 30 08:41:19] Found filesystem: vfat with blkid tool, using now this filesystemtype. (Posix.py|1711)
(4869)    [7] [Sep 30 08:41:19] Partition found =>>> number: 1, start: 0 MB (0 cyl), end: 244203 MB (31009 cyl), size: 244203 MB (31010 cyl), type: ee, fs: vfat, boot: False (Posix.py|1746)
(4870)    [7] [Sep 30 08:41:19] Waiting for device '/dev/sda1' to appear (Posix.py|1751)
(4871)    [7] [Sep 30 08:41:19] Device '/dev/sda1' found (Posix.py|1759)
(4872)    [6] [Sep 30 08:41:19] Executing: /sbin/sfdisk --version (Posix.py|926)
(4873)    [6] [Sep 30 08:41:19] Using encoding 'ANSI_X3.4-1968' (Posix.py|959)
(4874)    [7] [Sep 30 08:41:19] >>> sfdisk from util-linux 2.25.2 (Posix.py|1003)
(4875)    [7] [Sep 30 08:41:19] Exit code: 0 (Posix.py|1010)
(4876)    [6] [Sep 30 08:41:19] Executing: /sbin/sfdisk --version (Posix.py|926)
(4877)    [6] [Sep 30 08:41:19] Using encoding 'ANSI_X3.4-1968' (Posix.py|959)
(4878)    [7] [Sep 30 08:41:19] >>> sfdisk from util-linux 2.25.2 (Posix.py|1003)
(4879)    [7] [Sep 30 08:41:19] Exit code: 0 (Posix.py|1010)
(4880)    [6] [Sep 30 08:41:19] Executing: /sbin/sfdisk --version (Posix.py|926)
(4881)    [6] [Sep 30 08:41:19] Using encoding 'ANSI_X3.4-1968' (Posix.py|959)
(4882)    [7] [Sep 30 08:41:19] >>> sfdisk from util-linux 2.25.2 (Posix.py|1003)
(4883)    [7] [Sep 30 08:41:19] Exit code: 0 (Posix.py|1010)
(4884)    [6] [Sep 30 08:41:19] Executing: /sbin/sfdisk --version (Posix.py|926)
(4885)    [6] [Sep 30 08:41:19] Using encoding 'ANSI_X3.4-1968' (Posix.py|959)
(4886)    [7] [Sep 30 08:41:19] >>> sfdisk from util-linux 2.25.2 (Posix.py|1003)
(4887)    [7] [Sep 30 08:41:19] Exit code: 0 (Posix.py|1010)
(4888)    [6] [Sep 30 08:41:19] Executing: /sbin/sfdisk -L --no-reread -uS -l /dev/sda (Posix.py|926)
(4889)    [6] [Sep 30 08:41:19] Using encoding 'ANSI_X3.4-1968' (Posix.py|959)
(4890)    [7] [Sep 30 08:41:19] >>>  (Posix.py|1003)
(4891)    [7] [Sep 30 08:41:19] >>> Disk /dev/sda: 31130 cylinders, 255 heads, 63 sectors/track (Posix.py|1003)
(4892)    [7] [Sep 30 08:41:19] >>> Units: sectors of 512 bytes, counting from 0 (Posix.py|1003)
(4893)    [7] [Sep 30 08:41:19] >>>  (Posix.py|1003)
(4894)    [7] [Sep 30 08:41:19] >>>    Device Boot    Start       End   #sectors  Id  System (Posix.py|1003)
(4895)    [7] [Sep 30 08:41:19] >>> /dev/sda1             1 500118191  500118191  ee  GPT (Posix.py|1003)
(4896)    [7] [Sep 30 08:41:19] >>> /dev/sda2             0         -          0   0  Empty (Posix.py|1003)
(4897)    [7] [Sep 30 08:41:19] >>> /dev/sda3             0         -          0   0  Empty (Posix.py|1003)
(4898)    [7] [Sep 30 08:41:19] >>> /dev/sda4             0         -          0   0  Empty (Posix.py|1003)
(4899)    [7] [Sep 30 08:41:19] >>> sfdisk: Warning: The partition table looks like it was made (Posix.py|1003)
(4900)    [7] [Sep 30 08:41:19] >>>   for C/H/S=*/256/63 (instead of 31130/255/63). (Posix.py|1003)
(4901)    [7] [Sep 30 08:41:19] >>> For this listing I'll assume that geometry. (Posix.py|1003)
(4902)    [7] [Sep 30 08:41:19] Exit code: 0 (Posix.py|1010)
(4903)    [6] [Sep 30 08:41:19] Executing: /sbin/sfdisk --version (Posix.py|926)
(4904)    [6] [Sep 30 08:41:19] Using encoding 'ANSI_X3.4-1968' (Posix.py|959)
(4905)    [7] [Sep 30 08:41:19] >>> sfdisk from util-linux 2.25.2 (Posix.py|1003)
(4906)    [7] [Sep 30 08:41:19] Exit code: 0 (Posix.py|1010)
(4907)    [6] [Sep 30 08:41:19] Total sectors of disk '/dev/sda': 500118192, 512 bytes per cylinder (Posix.py|1810)
(4908)    [6] [Sep 30 08:41:19] Executing: /sbin/sfdisk --version (Posix.py|926)
(4909)    [6] [Sep 30 08:41:19] Using encoding 'ANSI_X3.4-1968' (Posix.py|959)
(4910)    [7] [Sep 30 08:41:19] >>> sfdisk from util-linux 2.25.2 (Posix.py|1003)
(4911)    [7] [Sep 30 08:41:19] Exit code: 0 (Posix.py|1010)
(4912)    [7] [Sep 30 08:41:19] Partition sector values =>>> number: 1, start: 1 sec, end: 500118191 sec, size: 500118191 sec  (Posix.py|1795)
(4913)    [6] [Sep 30 08:41:19] Executing: /sbin/sfdisk --version (Posix.py|926)
(4914)    [6] [Sep 30 08:41:19] Using encoding 'ANSI_X3.4-1968' (Posix.py|959)
(4915)    [7] [Sep 30 08:41:19] >>> sfdisk from util-linux 2.25.2 (Posix.py|1003)
(4916)    [7] [Sep 30 08:41:19] Exit code: 0 (Posix.py|1010)
(4917)    [6] [Sep 30 08:41:19] Executing: /sbin/sfdisk --version (Posix.py|926)
(4918)    [6] [Sep 30 08:41:19] Using encoding 'ANSI_X3.4-1968' (Posix.py|959)
(4919)    [7] [Sep 30 08:41:19] >>> sfdisk from util-linux 2.25.2 (Posix.py|1003)
(4920)    [7] [Sep 30 08:41:19] Exit code: 0 (Posix.py|1010)
(4921)    [6] [Sep 30 08:41:19] Executing: /sbin/sfdisk --version (Posix.py|926)
(4922)    [6] [Sep 30 08:41:19] Using encoding 'ANSI_X3.4-1968' (Posix.py|959)
(4923)    [7] [Sep 30 08:41:19] >>> sfdisk from util-linux 2.25.2 (Posix.py|1003)
(4924)    [7] [Sep 30 08:41:19] Exit code: 0 (Posix.py|1010)
(4925)    [6] [Sep 30 08:41:19] Executing: cat /sys/block/sda/queue/rotational (Posix.py|926)
(4926)    [6] [Sep 30 08:41:19] Using encoding 'ANSI_X3.4-1968' (Posix.py|959)
(4927)    [7] [Sep 30 08:41:19] >>> 0 (Posix.py|1003)
(4928)    [7] [Sep 30 08:41:19] Exit code: 0 (Posix.py|1010)
(4929)    [5] [Sep 30 08:41:19] multi_disk_mode is prefer_ssd - so we use disk number: 0 uuid:70a1beb7-4909-452f-bf44-2bba8a5295ed (setup.py|582)
(4930)    [5] [Sep 30 08:41:19] Using disk device /dev/sda (setup.py|584)
(4931)    [5] [Sep 30 08:41:19] Check if disk /dev/sda is ssd or classic (rotational) HD (opsisetuplib.py|85)
(4932)    [5] [Sep 30 08:41:19] Disk /dev/sda is not rotational (SSD) (opsisetuplib.py|101)
(4933)    [5] [Sep 30 08:41:19] Required winpe partition (5) size is 12000M (setup.py|612)
(4934)    [5] [Sep 30 08:41:19] systemPartitionSizeM is: 230698 (setup.py|620)
(4935)    [5] [Sep 30 08:41:19] Required Windows partition (4) size is 101400M, data partition (6) size is 129298M (setup.py|708)
(4936)    [5] [Sep 30 08:41:19] Check if preserve data partition is possible .... (setup.py|722)
(4937)    [5] [Sep 30 08:41:19] Ignoring dataPartitionPreserve because number of existing partitions 1 is lower than the required system partition number 4. (setup.py|742)
(4938)    [2] [Sep 30 08:41:20] Traceback: (Logger.py|798)
(4939)    [2] [Sep 30 08:41:20]   File "/usr/local/bin/master.py", line 1656, in <module>
(4940)        execfile(actionScript)
(4941)     (Logger.py|798)
(4942)    [2] [Sep 30 08:41:20]   File "/tmp/setup.py", line 853, in <module>
(4943)        raise Exception(u"Could not use the existing partition table on %s - but not allowed to delete it - stopping here" % (disk.device))
(4944)     (Logger.py|798)
(4945)    [2] [Sep 30 08:41:20]      ==>>> Could not use the existing partition table on /dev/sda - but not allowed to delete it - stopping here (master.py|1708)
(4946)    [7] [Sep 30 08:41:20] Backend: <JSONRPCBackend(host=u'192.168.xx.xx', compression=True)> (master.py|1711)
(4947)    [7] [Sep 30 08:41:20] ProductId: win10-x64 (master.py|1712)
(4948)    [7] [Sep 30 08:41:20] ClientId: client01.test.de (master.py|1713)
(4949)    [7] [Sep 30 08:41:20] ProductOnClient: <ProductOnClient(clientId=u'xxx', productId=u'win10-x64', installationStatus=u'unknown', actionRequest=u'none')> (master.py|1714)
(4950)    [7] [Sep 30 08:41:20] Executing jsonrpc method 'productOnClient_updateObjects' on host u'192.168.xx.xx' (JSONRPC.py|116)
(4951)    [7] [Sep 30 08:41:20] Posting request... (JSONRPC.py|708)
(4952)    [7] [Sep 30 08:41:20] Starting new HTTPS connection (1) to 192.168.xx.xx:4447 (HTTP.py|607)
(4953)    [7] [Sep 30 08:41:20] Connection established to: 192.168.xx.xx (HTTP.py|609)
(4954)    [7] [Sep 30 08:41:20] Closing connection: <httplib.HTTPSConnection instance at 0x7f8c8c112c20> (HTTP.py|527)
(4955)    [7] [Sep 30 08:41:20] Expecting gzip'ed data from server (JSONRPC.py|743)
(4956)    [5] [Sep 30 08:41:20] Writing log to service (master.py|1737)

Gruß
Dirk

[SisterOfMercy]

Code: Alles auswählen

(4934)    [5] [Sep 30 08:41:19] systemPartitionSizeM is: 230698 (setup.py|620)
(4935)    [5] [Sep 30 08:41:19] Required Windows partition (4) size is 101400M, data partition (6) size is 129298M (setup.py|708)
(4936)    [5] [Sep 30 08:41:19] Check if preserve data partition is possible .... (setup.py|722)
(4937)    [5] [Sep 30 08:41:19] Ignoring dataPartitionPreserve because number of existing partitions 1 is lower than the required system partition number 4. (setup.py|742)

If you look at these lines in the log file, it gives a hint.
I can only guess to what's causing that. Are you switching to an UEFI install or have these computers already been installed with UEFI before?
And the total size of the installed hard drive is 250 GB, or is it bigger? Or does it have multiple drives somehow? Because I also don't see the EFI partition.

[m.radtke]

Hi

also irgendwas stimmt da definitiv nicht, wie SysterOfMercy schon angemerkt hat.
+Diese Fehlermeldung

Code: Alles auswählen

Ignoring dataPartitionPreserve because number of existing partitions 1 is lower than the required system partition number 4.

Nur wenn die Anzahl der Partitionen auf der Platte kleiner ist als die Partition auf der das System, in diesem Fall Partition 4, erstellt werden soll.

Leider ist das Log aufgrund der Kürze nicht aussagekräftig genug um da den Grund dafür zu finden.

Gruß
Mathias

[admin_ahn]

Hallo,

ist schon komisch auf der Platte sind 5 Partitionen:

Code: Alles auswählen

Disk /dev/sda: 238.49 GiB, 256060514304 bytes, 500118192 sectors
Disk model: KINGSTON RBU-SNS
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
Disk identifier: 557D21E6-4338-4CB0-B40F-DC731F022BC9

Device         Start       End   Sectors   Size Type
/dev/sda1       2048    204800    202753    99M EFI System
/dev/sda2     206848    468991    262144   128M Microsoft reserved
/dev/sda3     468992   1492991   1024000   500M Microsoft basic data
/dev/sda4    1492992 233736191 232243200 110.8G Microsoft basic data
/dev/sda5  233736192 500118158 266381967   127G Microsoft basic data

Vielleicht gibt das komplette Log einen Aufschluss.
https://pastebin.pl/view/487bf15d

Ich habe das ganze einmal mir Legacy Boot durchgespielt dort funktioniert es wunderbar.
Sobald ich Windows über UEFI installiere und dann mit dem Parameter data_partitonen_preserved erneut installiere kommt die Fehlermeldung.

Schon mal danke.
Dirk