The: 'Hello 2019 and Goodbye opsi4.0' Release

Antworten
Benutzeravatar
d.oertel
uib-Team
Beiträge: 3319
Registriert: 04 Jun 2008, 14:27

The: 'Hello 2019 and Goodbye opsi4.0' Release

Beitrag von d.oertel »

Dear opsi users,

this release publishes the testing packages of the last release as stable and is so the last release,
that publishes opsi4.0 packages.

If you are still on opsi 4.0: "Don't Panic"

The opsi 4.0 repositories will kept open on the same place for about a year and will move
next year to a also reachable archive place.
The possibility and the way to upgrade to opsi 4.1 does not change anyway.

What has changed:
We stopped the extensive, automatic test for all opsi 4.0 packages.
So even if we assume that a new or modified package should run at opsi4.0,
we will not publish it as opsi 4.0 package because it is not tested in this environment.

We would be happy to help you to migrate within the scope of a support contract.

With a look to the new packages of this release which are only published for opsi 4.0
we have to mark the following points:

* (Testing) python-opsi 4.1.1.58-1
This update also carries changes at the Hardware-Audit-Configuration.
Therefor we recommend to call the following commands after you installed this release:
opsi-setup --update-mysql
service opsiconfd restart

* (Testing) Windows NT6 Netbootpakete 4.1.0.0-15: 64Bit bootimage
As we noticed in the last while some new Hardware has problems with the 32Bit
opsi-linux-bootimage, which was used as standard for the windows installation.
Those hardware works normally well booting the 64bit bootimage.
So since the 4.1.0.0-15 version of the windows netboot products, there is a new property: 'architecture'.
This property select the bootimage architecture (e.g. 32/64 Bit) and the default is '64bit'.
It will not (!) affect the architecture of the installed Operating System. +
If you try to install windows on a 32bit only hardware (i386) you need to choose 'architecture = 32bit'.
Please note: This feature only works correct since python-opsi 4.1.1.58-1

* (Testing) opsi-script 4.12.0.35-1: Bitlocker Reboot Support
There is a new config: 'opsi-script.global.w10bitlockersuspendonreboot'
If this config is true and the script has a reboot request it will be checked
if the Operating System is Windows >= 10 and bitlocker is active (encryption > 0%) on the system drive (e.g. c:).
If all these conditions are given, opsi-script calls via powershell a `suspend-bilocker`.
(https://docs.microsoft.com/en-us/powers ... w=win10-ps)
This causes, that after the reboot no password input is needed. This method leads to a loss of security:
"Suspension of BitLocker does not mean that BitLocker decrypts data on the volume. Instead, suspension makes key used to decrypt the data available to everyone in the clear." +
Default: false

Important news about the stable packages:

* (Stable) There is a new version of the 'winexe' program which works now also with the newest versions of Windows 10
and may be downloaded from the opsi repository for your opsi-server.

* (Stable)The new server package 'opsi-script' provides the opsi-script interpreter
for your opsi-server (and other Linux machines) without installing the opsi-linux-client-agent.



#####################################
Available for opsi 4.1 in testing:

Windows Netboot:

* windows Nt6 (4.1.0.0-15)

Windows LocalBoot packages:

* opsi-winst 4.12.0.35-1
* opsi-script-test 4.12.0.35-1
* opsi-client-agent_4.1.0.0-26.opsi
* opsi-template-with-admin_4.1.0.0-1.opsi

opsi-linux packages:

Linux Netboot packages:

* sles12sp4 4.1.0.0-1

Linux LocalBoot packages:

* l-opsi-server 4.1.1.9-2
* l-opsi-server-migrate 4.1.2-2
* opsi-linux-client-agent_4.1.0.11-1.opsi

opsi-local-image / opsi-vhd:

* opsi-local-image Windows Nt6 (4.1.0.0-15)
* opsi-vhd Windows Nt6 (4.1.0.0-15)


Server packages 4.1:

* python-opsi 4.1.1.58-1
* opsi-linux-bootimage (20181213-1)

Documentation:

* opsi-manual (4.1)
* opsi-script-manual
* opsi-getting-started (4.1)

#####################################
Available for opsi 4.0 and 4.1 in stable:

Windows Netboot:

* windows Nt6 (4.1.0.0-14)

Windows LocalBoot packages:

* opsi-configed 4.0.7.8.6-1
* windows10-upgrade 18.09-1
* opsi-client-agent 4.1.0.0-24
* config-win10 4.1.1-5

opsi-linux packages:

Linux Netboot packages:

* centos70 4.1.0.0-2

Linux LocalBoot packages:

* opsi-configed 4.0.7.8.6-1

opsi-local-image / opsi-vhd:

* opsi-local-image Windows Nt6 (4.1.0.0-14)
* opsi-vhd Windows Nt6 (4.1.0.0-14)

Server packages:
opsi 4.0:

none

opsi 4.1

* opsi-utils 4.1.1.28-1
* opsi4ucs 4.1.1.7-1
* winexe 4.8.0.0-15
* opsi-script 4.12.0.31-2

Documentation:

* opsi-manual (4.0/4.1)
* opsi-script-manual
* opsi-getting-started (4.0/4.1)

########################

cheers
detlef oertel


Changelogs:
=============================
opsi-winst/opsi-script (4.12.0.35) stable; urgency=low

* osparser: producestringlist: getsublist: with whitespaces around numbers
* osmain: Loginscripts: do not break login script loop on reboots
* oswebservice: getMapOfLoginscripts2Run: allscripts=false:
we want to run the login script if installed
or last successful action was uninstall


-- Detlef Oertel <d.oertel@uib.de> Tue, 15 Jan 2019:15:00:00 +0200

opsi-winst/opsi-script (4.12.0.34) stable; urgency=low

* osparser: producestringlist: getsublist: with string expression instead of numbers
* osparser: producestringlist: createstringlist: fix: empty strings as argument allowed

-- Detlef Oertel <d.oertel@uib.de> Thu, 10 Jan 2019:15:00:00 +0200

opsi-winst/opsi-script (4.12.0.33) stable; urgency=low

* osconf: new config opsi-script.global.w10BitlockerSuspendOnReboot
* osconf: new global config variable: w10BitlockerSuspendOnReboot (default= false)
* osmain: buildPC: >=win 10 and w10BitlockerSuspendOnReboot and (txrImmediateReboot or txrImmediateReboot)
then suspend bitlocker for 1 reboot fixes: #3816
* new units oswmi, utilwmi
* osparser: producestringlist:
experimental: new function getListFromWMI(<wmi class str>,<property list>,<condition str>) : stringlist
example: set $plist$ = createStringList ('Model','Vendor')
set $list$ = getListFromWMI('Win32_ComputerSystem',$plist$,'where model like %Esprimo%')
if <property list> is empty all properties of <wmi class str> will be returned
on error a empty list will be returned

-- Detlef Oertel <d.oertel@uib.de> Mon, 17 12 2018:15:00:00 +0200

=============================
windows (4.1.0.0-15) stable; urgencly=low

* nt6.py: replace 'pev -p' by 'peres -v'
* new property 'architecture' to choose the bootimage architecture. Default 64bit
* pxeConfigTemplate: install3264

-- detlef oertel <d.oertel@uib.de> Fri, 14 Dec 2018 15:00:00 +0200

windows (4.1.0.0-14) stable; urgencly=low

* nt6.py: localize admin only if winver >= 10

-- detlef oertel <d.oertel@uib.de> Wed, 12 Dec 2018 15:00:00 +0200

windows (4.1.0.0-13) stable; urgency=low

* corrected behaviour on NVME devices

-- Mathias Radtke <m.radtke@uib.de> Mon Dec 3 14:01:07 2018 +0200

=============================
opsi-client-agent (4.1.0.0-26) stable; urgency=low

* temporary go back to opsiclientd 4.0.94

-- Detlef Oertel <d.oertel@uib.de> Thu, 17 Jan 2019:15:00:00 +0200

opsi-client-agent (4.1.0.0-25) stable; urgency=low

* opsiclientd 4.1.1
* setup412: allow non admin login (uib#2014010810000019 / uib#2019010910000053) (do 17.1.2019)

-- Erol Ueluekmen <e.ueluekmen@uib.de> Wed, 16 Jan 2018:10:25:00 +0200

opsi-client-agent (4.1.0.0-24) stable; urgency=low

* opsiclientd 4.0.94: win10 fix.

-- Erol Ueluekmen <e.ueluekmen@uib.de> Wed, 05 Dec 2018:10:25:00 +0200


opsi-client-agent (4.1.0.0-23) stable; urgency=low

* opsiclientd 4.0.94

-- Erol Ueluekmen <e.ueluekmen@uib.de> Tue, 04 Dec 2018:17:25:00 +0200

=============================

opsi-template-with-admin (4.1.0.0-1) stable; urgency=low

* allows to temporary disable UAC
* use: asconfidential
* use: GetRegistryValue
* requires opsi-script 4.12.0.16

-- detlef oertel <d.oertel@uib.de> Thu, 03 Jan 2019 15:00:00 +0000

=============================

opsi-configed (4.0.7.8.6-1) STABLE; urgency=medium

* now it is possible to use a value for uefi (and it is shown)

-- Rupert <r.roeder@uib.de> Tue, 30 Oct 2018 16:11:46 +0100

opsi-configed (4.0.7.8.5-1) STABLE ; urgency=medium

* Working code for multi host editing of WAN and UEFI was commented out
* default values for UEFI were not taken into account

-- roeder <r.roeder@uib.de> Wed, 24 Oct 2018 13:14:20 +0200

opsi-configed (4.0.7.8.4-1) STABLE ; urgency=medium

* changed name of an exception class taken into account when filtering exceptions to ignore
* more java version info

-- roeder <r.roeder@uib.de> Thu, 11 Oct 2018 13:14:20 +0200

=============================

windows10-upgrade (18.09-1) stable; urgency=low

* windows 10 1809

-- bardo wolf <b.wolf@uib.de> Thu 18. Oct 12:08:25 CEST 2018

=============================

config-win10 (4.1.1-5); stable; urgency=low

* try to fix errors in Registry_hkcu_enable_settings_sync
* removed ;Registry_hklm_update_enable_search /sysnative
* added (see https://docs.microsoft.com/en-us/window ... igure-wufb)
property DeferFeatureUpdatesPeriodInDays
property DeferQualityUpdatesPeriodInDays

-- Bardo Wolf <b.wolf@uib.de> Wed, 30 Nov 2018

config-win10 (4.1.1-4); stable; urgency=low

* Property name: disable_smbv1 default set to true
* remove in Login Mode erroneouasly /ALLNTUSERDATS
* split minimize_recommendation in hkcu and hklm, add hkcu to Login Mode
* change show_all_folder_in_navbar to /ALLNTUSERDATS and add to Login mode
* change show_thispc_instead_of_quicklaunch to /ALLNTUSERDATS and add to Login mode
* change hide_known_file_extensions to /ALLNTUSERDATS and add to Login mode
* change disable_app_suggestion_in_startmenu to /ALLNTUSERDATS and add to Login mode
* change disable_recent_apps to /ALLNTUSERDATS and add to Login mode
* change disable_suggested_silent_app_installation to /ALLNTUSERDATS and add to Login mode
* change disable_error_report to /ALLNTUSERDATS and add to Login mode

* Registry_hklm_disable_push added 32AND 64Bit
* Registry_hklm_do_publish added 32AND 64Bit

-- Bardo Wolf <b.wolf@uib.de> Wed, 28 Nov 2018

config-win10 (4.1.1-3); stable; urgency=low

* fixed double initialization of disable_update_service

-- Mathias Radtke <m.radtke@uib.de> Wed, 21 Nov 2018 11:20:00 +0200

config-win10 (4.1.1-2); stable; urgency=low

* corrected userlogin script behaviour

-- Mathias Radtke <m.radtke@uib.de> Wed, 14 Nov 2018 14:00:00 +0100

config-win10 (4.1.1-1); stable; urgency=low

* added new properties:
* disable_push_install
* disable_error_report
* disable_suggested_silent_app_installation
* disable_app_suggestion_in_startmenu
* minimize_recommendations
* hide_known_file_extensions
* allow_useractivity_publishing
* remove_edge_from_desktop
* show_thispc_instead_of_quicklaunch
* show_drive_letter_first
* show_all_folder_in_navbar

-- Mathias Radtke <m.radtke@uib.de> Tue, 25 Sep 2018 13:40:00 +0200

=============================

centos70 (4.1.0.0-2); testing; urgency=low

* corrected installation when using a proxy

-- Mathias Radtke <m.radtke@uib.de> Wed Dec 05 2018 08:57:00 +0100

centos70 (4.1.0.0-1) testing; urgency=low

* removing unndeeded opsicliend binaries

-- Mathias Radtke <m.radtke@uib.de> Wed Aug 22 13:50:00

=============================


=============================

opsi-linux-client-agent (4.1.0.11-1) stable; urgency=medium

* opsi-script 4.12.0.35
* opsi-script-starter 4.1.0.3:
* new function ismounted(mountpoint)
* after mount check not only exit code but also with ismounted

-- d.oertel <d.oertel@uib.de> Thu, 18 Oct 2018 15:00:00 + 0100

opsi-linux-client-agent (4.1.0.10-2) stable; urgency=medium

* updated opsi-deploy-client-agent to 4.1.0.1.

-- Niko Wenselowski <n.wenselowski@uib.de> Thu, 10 Jan 2019 18:10:57 +0100

opsi-linux-client-agent (4.1.0.10-1) stable; urgency=medium

* added SLES12SP4 support

-- Mathias Ratdke <m.radtke@uib.de> Thu, 3 Jan 2019 08:22:00 +0100

=============================

l-opsi-server (4.1.1.9-2); testing; urgency=low

* sles12sp4: corrected opsi-server installation

-- Mathias Radtke <m.radtke@uib.de> Fri, 4 Jan 2019 10:00:00 +0100

l-opsi-server (4.1.1.9-1); testing; urgency=low

* sles12sp4 support added

-- Mathias Radtke <m.radtke@uib.de> Thu, 3 Jan 2019 10:00:00 +0100

l-opsi-server (4.1.1.8-2); testing; urgency=low

* opsi 4.1 & UCS: wait a little bit longer for MySQL socket.

-- Niko Wenselowski <n.wenselowski@uib.de> Thu 20 Dec 2018 16:02:54 +0100

l-opsi-server (4.1.1.8-1); testing; urgency=low

* OpenSUSE Leap 15.0 support added

-- Mathias Radtke <m.radtke@uib.de> Thu 25 Oct 2018 08:00:00 +0200

=============================

l-opsi-server-migrate 4.1.2-2; testing; urgency=low

* checking exitcode when running zypper dup (SLES/openSUSE)

-- Mathias Radtke <m.radtke@uib.de> Thu 10 Jan 2019 10:55:00 +0100

l-opsi-server-migrate 4.1.2-1; testing; urgency=low

* depotserver migration possible
* new property: opsi-migrate-product-updater-configuration

-- Mathias Radtke <m.radtke@uib.de> Mon 12 Nov 2018 10:55:00 +0100

l-opsi-server-migrate 4.1.1-7; testing; urgency=low

* UCS: upgrading to point release max.

-- Mathias Radtke <m.radtke@uib.de> Fri 29 Jun 2018 09:51:00 +0200

l-opsi-server-migrate 4.1.1-5; testing; urgency=low

* setup.opsiscript: corrected SLES repsotirory bug

-- Mathias Radtke <m.radtke@uib.de> Tue 13 Feb 2018 10:41:00 +0100

l-opsi-server-migrate 4.1.1-5; testing; urgency=low

* setupp.opsiscript: removed old opsi41 repo references

-- Mathias Radtke <m.radtke@uib.de> Thu 08 Feb 2018 14:52:00 +0100

=============================

sles12sp4 (4.1.0.0-1) testing; urgency=low

* forked from sles12sp3

-- Mathias Radtke <m.radtke@uib.de> Wed Jan 2 2019 13:50:00

=============================

opsi-linux-bootimage (20181213-1) testing; urgency=medium

* kernel 4.19.7
* added uefi module check

-- Mathias Radtke <m.radtke@uib.de> Mon, 10 Dec 2018 12:27:09 +0100

opsi-linux-bootimage (20181112-1) testing; urgency=medium

* kernel 4.18.18
* disabled IPv6

-- Mathias Radtke <m.radtke@uib.de> Mon, 12 Nov 2018 09:53:47 +0100

opsi-linux-bootimage (20181022-1) testing; urgency=medium

* bootimage uses Ubuntu 18.04 (bionic beaver) base

-- Mathias Radtke <m.radtke@uib.de> Thu, 18 Oct 2018 09:45:54 +0200

opsi-linux-bootimage (20181008-1) testing; urgency=medium

* kernel 4.18.12
* added NVIDIA FB support
* added GPU switching support

-- Mathias Radtke <m.radtke@uib.de> Mon, 08 Oct 2018 13:10:48 +0200

opsi-linux-bootimage (20180928-1) testing; urgency=medium

* kernel 4.18.10

-- Mathias Radtke <m.radtke@uib.de> Fri, 28 Sep 2018 15:51:10 +0200

opsi-linux-bootimage (20180924-1) testing; urgency=medium

* kernel 4.17.19
* added DM Raid modules

-- Mathias Radtke <m.radtke@uib.de> Mon, 24 Sep 2018 13:49:06 +0200

=============================
opsi-script linux:

opsi-script (4.12.0.31-2) stable; urgency=medium

* corrected installation routine in debian based systems

-- Mathias Radtke <m.radtke@uib.de> Wed, 05 Dec 2018 14:57:03 +0100

=============================
opsi4ucs (4.1.1.7-1) stable; urgency=medium

* Remove more translation leftovers.

-- Niko Wenselowski <n.wenselowski@uib.de> Mon, 26 Nov 2018 15:31:34 +0100

opsi4ucs (4.1.1.6.1-1) stable; urgency=medium

* Make the message nicer to read.
* Remove unsupported translation functions.

-- Niko Wenselowski <n.wenselowski@uib.de> Fri, 23 Nov 2018 18:14:10 +0100

opsi4ucs (4.1.1.6-1) stable; urgency=medium

* Registering a depot will now provide the user with the option to delete an
existing client if the ID of the server to register and the client at the
destination server are the same.

-- Niko Wenselowski <n.wenselowski@uib.de> Fri, 23 Nov 2018 18:02:14 +0100

opsi4ucs (4.1.1.5-5) stable; urgency=medium

* postinst: Accept non-zero exit codes.
call_joinscript may return 1 if the join script in question has already
been executed before.

-- Niko Wenselowski <n.wenselowski@uib.de> Mon, 15 Oct 2018 14:16:13 +0200

=============================
python-opsi (4.1.1.58-1) stable; urgency=medium

* Re-release 4.1.1.57 due to some merge problems.

-- Niko Wenselowski <niko@stellar> Fri, 18 Jan 2019 16:36:48 +0100

python-opsi (4.1.1.57-1) stable; urgency=medium

* OPSI.Util.Task.ConfigureBackend.DHCPD: Default path for dhcpd config set
to /etc/dhcp/dhcpd.conf.
* Added module OPSI.Util.Task.ConfigureBackend.ConfigDefaults.

-- Niko Wenselowski <n.wenselowski@uib.de> Fri, 18 Jan 2019 16:19:30 +0100

python-opsi (4.1.1.56-1) testing; urgency=medium

* OPSI.Backend.OpsiPXEConfd: _collectDataForUpdate: Changed first
parameter
to client ID instead of getting the value from a ProductOnClient.

-- Niko Wenselowski <n.wenselowski@uib.de> Tue, 08 Jan 2019 17:40:47 +0100

python-opsi (4.1.1.55-1) testing; urgency=medium

* OPSI.Backend.OpsiPXEConfd: Caching data will now work as expected
when changing PXE templates of a product.

-- Niko Wenselowski <n.wenselowski@uib.de> Tue, 08 Jan 2019 17:12:53 +0100

python-opsi (4.1.1.54-1) stable; urgency=medium

* OPSI.Util.Task.Backup: Do not show a message for an unused backend
when running in auto mode.
* OPSI.System.Posix & OPSI.System.Windows: refactored getDiskSpaceUsage.
* OPSI.System.Windows: Make code more consistent with the other modules.
* OPSI.Util.Task.InitializeBackend: supplied an __all__.
* OPSI.Util.Task.InitializeBackend and OPSI.Util.Task.Rights use the
BackendManager in contextmanager style.
* OPSI.Util.Repository: Make code more consistent with the other modules.
* opsihwaudit.conf: Accept NICs with 10GB+ throughput.
* OPSI.Sytem.Posix: removed support for dhcp3 dhclient.leases file.

-- Niko Wenselowski <n.wenselowski@uib.de> Fri, 07 Dec 2018 13:37:00 +0100

=============================
opsi-utils (4.1.1.28-1) stable; urgency=medium

* opsi-package-manager: Propagate problems when executing tasks instead
of an direct exit.

-- Niko Wenselowski <n.wenselowski@uib.de> Tue, 04 Dec 2018 12:12:56 +0100

opsi-utils (4.1.1.27-1) stable; urgency=medium

* opsi-package-manager: Reference the used logfile if tasks failed instead
of always using the default path.
* Logrotate configuration for opsi-package-manager references the correct
default logfile (/var/log/opsi/package.log).

-- Niko Wenselowski <n.wenselowski@uib.de> Mon, 05 Nov 2018 18:00:49 +0100

opsi-utils (4.1.1.26-1) testing; urgency=medium

* opsi-package-updater: Make use of OPSI.Util.Task.UpdatePackages from
python-opsi.
* Various small changes in opsi-admin, opsi-backup, opsi-convert,
opsi-makepackage, opsi-newprod and opsi-package-manager to make the
switch to Python 3 easier.

-- Niko Wenselowski <n.wenselowski@uib.de> Thu, 18 Oct 2018 17:30:26 +0200

opsi-utils (4.1.1.25-1) stable; urgency=medium

* Based on opsi-utils 4.0.7.20.

-- Niko Wenselowski <n.wenselowski@uib.de> Mon, 10 Sep 2018 17:01:48 +0200

=============================

winexe (4.8.0.0-15) experimental; urgency=medium

* SLES/OpenSUSE: using mingw64-cross-gcc as dep

-- Mathias Radtke <m.radtke@uib.de> Wed, 01 Aug 2018 13:24:56 +0200

winexe (4.8.0.0-14) experimental; urgency=medium

* rpm/spec: added mingw32-cross-gcc if SLES/openSUSE

-- Mathias Radtke <m.radtke@uib.de> Tue, 31 Jul 2018 14:06:40 +0200

winexe (4.8.0.0-13) experimental; urgency=medium

* rpm/spec: added debug ls commands

-- Mathias Radtke <m.radtke@uib.de> Mon, 30 Jul 2018 10:53:09 +0200

winexe (4.8.0.0-12) experimental; urgency=medium

* debian/control: added Maintainer

-- Mathias Radtke <m.radtke@uib.de> Fri, 27 Jul 2018 14:26:38 +0200

winexe (4.8.0.0-11) experimental; urgency=medium

* debian/compat: added
* rpm/spec: corrected file copy

-- Mathias Radtke <m.radtke@uib.de> Fri, 27 Jul 2018 13:57:38 +0200

winexe (4.8.0.0-10) experimental; urgency=medium

* control: added debhelper
* spec: copy file edited

-- Mathias Radtke <m.radtke@uib.de> Fri, 27 Jul 2018 10:33:28 +0200

winexe (4.8.0.0-9) experimental; urgency=medium

* debian/rules: exporting basic DH_OPTIONS
* rpm/spec: added python-xml as dependency

-- Mathias Radtke <m.radtke@uib.de> Fri, 27 Jul 2018 09:47:07 +0200

winexe (4.8.0.0-8) experimental; urgency=medium

* spec. mingw changed for non SLES

-- Mathias Radtke <m.radtke@uib.de> Wed, 25 Jul 2018 15:10:53 +0200

winexe (4.8.0.0-7) experimental; urgency=medium

* control: python-devel added
* spec: libacl1-dev added

-- Mathias Radtke <m.radtke@uib.de> Wed, 25 Jul 2018 15:02:54 +0200

winexe (4.8.0.0-6) experimental; urgency=medium

* spec: changed RPM dependency
* rules: removed dh_clean references

-- Mathias Radtke <m.radtke@uib.de> Wed, 25 Jul 2018 14:45:39 +0200

winexe (4.8.0.0-5) experimental; urgency=medium

* depencency changes

-- Mathias Radtke <m.radtke@uib.de> Wed, 25 Jul 2018 14:32:13 +0200

winexe (4.8.0.0-4) experimental; urgency=medium

* rpm/spec: corrected additional else

-- Mathias Radtke <m.radtke@uib.de> Wed, 25 Jul 2018 13:57:13 +0200

winexe (4.8.0.0-3ubuntu1) experimental; urgency=medium

* rpm/spec: corrected buildRequires

-- Mathias Radtke <m.radtke@uib.de> Wed, 25 Jul 2018 13:49:50 +0200

winexe (4.8.0.0-2) experimental; urgency=medium

* rpm/spec: corrected pckage naming for different RPM distributions

-- Mathias Radtke <m.radtke@uib.de> Wed, 25 Jul 2018 13:26:13 +0200

winexe (4.8.0.0-1) experimental; urgency=medium

* initial package creation*

-- Mathias Radtke <m.radtke@uib.de> Wed, 25 Jul 2018 12:25:12 +0200

=============================
opsi support - uib gmbh

For productive opsi installations we recommend support contracts.
http://www.uib.de
http://www.opsi.org
Antworten